我国东部白垩纪蚀变火山岩中的斜发沸石和丝光沸石

沸石是一种含水的碱和碱土金属的骨架状铝硅酸盐。由于沸石具有分子筛的作用,在应用中通常又将沸石称为分子筛。沸石作为催化剂、干燥剂、吸附剂和离子交换剂广泛地应用于工农业各个方面。天然沸石作为一种新型的矿物资源越来越为人们所重视。     

Acidic Rocks as Aggregates in Concrete: Engineering Properties,Microstructures and Petrologic Characteristics

In this research, the possibility of replacing different portions of the normally used aggregate by acidic rocks was investigated. These rock types outcrop at the northern part of Eastern Desert, southwest Ras Gharib area where large quantities of good quality acidic rocks are available their. Portland cement concrete is a composite material made up of the hydrated cement matrix, fine aggregate and coarse aggregate. The scanning electron microscope equipped with an energy dispersive X-ray analysis system (EDX) has been applied to investigate several aspects of Portland cement concrete microstructure. The topics investigated so far include the influence of aggregate composition on the development of the cement paste-aggregate interface and the formation of calcium silicate hydrate CSH/calcium silicate aluminate CSA formation. The silicate gel coated the aggregates in the concrete paste and crystallized into well defined needle like shape, cotton shape as well as euhedral to subhedral crystals of silicate/alumiante and ettringite minerals with free lime librated from the hydrolysis process. The free lime can react again with the aggregates leading to the formation of cementing materials which increase strength and durability of the concrete paste by increasing the interfacial bonds between the used aggregates.     

中国东部中生代火山岩中沸石岩的地质特征和成因

天然沸石是岩石圈上部分布最广的硅酸盐矿物之一,它普遍地见于各种火山岩和火山-沉积岩中。沸石不仅在岩浆期后热液阶段生成,而且在沉积-成岩作用阶段、表生作用(风化)阶段、低级变质阶段都可以生成。由于沸石对周围的物理化学条件和热、动力变质作用反应灵敏,因此,它是了解地质体形成时的地质环境及其变化的良好的指示矿物。本文概述了我国东部中生代火山岩中沸石岩的分布、时代、产出的地层岩性剖面、原岩类型、矿物组合及其生成顺序,并探讨了它的形成条件和成因类型,其中主要涉及具有工业意义的斜发沸石岩和丝光沸石岩。     

Use of clay as a pozzolona in high strength Portland cement and its thermal activation

In this investigation local clay from Cherat mines, Nowshera District, NWFP, Pakistan, has been tested as a pozzolanic material in high strength Portland cement. Thermal treatments were performed as a means of activation of the clay. It was found that thermal treatment of the clay can increase its pozzolanic activity. Different blended mortars, containing different amounts of clay, activated at different temperatures were studied for compressive strength, consistency, and setting times. It was concluded that the mechanical properties of the blended cements were mainly governed by the percentage of incorporation of the calcined clay. Blended cement composition has been formulated, with optimal results of 20% calcined clay at a temperature of 600℃.     

Effect of Cement Type on the Mechanical Behavior of a Gravely Sand

The behavior of a cemented gravely sand was studied using triaxial compression tests. Gypsum, Portland cement and lime were used as the cementing agents in sample preparation. The samples with different cement types were compared in equal cement contents. Three cement contents of 1.5%, 3.0% and 4.5% were selected for sample preparation. Drained and undrained triaxial compression tests were conducted in a range of confining pressures from 25 kPa to 500 kPa. Failure modes, shear strength, stress–strain behavior, volume and pore pressure changes were considered. The gypsum cement induced the highest brittleness in soil among three cement types while the Portland cement was found to be the most ductile cementing agent. In lower cement contents and lower confining pressures the soil cemented with Portland cement showed the highest shear strength. However, in the same range of cement content, the soil cemented with gypsum showed highest shear strength for highest tested confining stress. For higher cement contents the shear strength of soil cemented with Portland cement is higher than that for the two other cement types for the range of confining pressures tested in the present study. The samples cemented with lime had the least peak and ultimate shear strength and the highest pore pressure generation in undrained tests. Contrary to the soil cemented with lime, the brittleness of soil cemented with gypsum and Portland cement reduces in undrained condition. Finally it was found that the effect of cement type on the shear strength of cemented soils is more profound in drained condition compared to undrained state.     

斜发沸石和丝光沸石的吸水性能

用离子交换、酸和碱处理斜发沸石来提高它的吸水能力没有取得明显效果。测得的斜发沸石、丝光沸石吸附水的等温线具有非线性特征,但25℃的等温线在水蒸气分压高于2400Pa 时,斜发沸石、丝光沸石和有粘合剂的合成分子筛的吸水量随着分压的升高而增加。这是由于样品中含有粘土矿物产生水蒸气的毛细凝聚作用而引起的。根据沸石的吸附热和水的蒸发热,用沸石作为吸附剂和水作为工质能建立一个高效的沸石太阳能利用体系。     

浙江缙云中生代火山岩丝光沸石矿物学特征及其成因浅析

运用X射线衍射、红外吸收光谱、差热-热重分析、扫描电镜形貌研究及微区化学成分分析等手段,研究了浙江省缙云县产于球泡流纹岩球泡腔体内和产于角砾凝灰岩、凝灰熔岩型沸石矿体内的丝光沸石的矿物学特征及其成因机制。研究表明,球泡腔体内的丝光沸石与矿体内丝光沸石的矿物学特征存在明显差别:前者仅与石英紧密共生,而后者则与斜发沸石、石英以及蒙脱石等紧密共生;前者12元环通道半径收缩,而后者则8元环通道半径收缩。同时,前者具有更高的K2O/CaO、SiO2/Al2O3以及K2O/Na2O比值,而后者则阳离子电价过剩程度更高。研究认为,球泡内丝光沸石是球泡捕获的火山热液结晶产物,而矿体内丝光沸石是火山岩成岩期间隙溶液活动产物。     

Some Geological Considerations and Durability Analysis on the Use of Crushed Pyroclastics from Abakaliki (Southeastern Nigeria) as Concrete Aggregate

Samples of pyroclastic rocks from Abakaliki area (Nigeria) were subjected to geological and geochemical tests to determine the suitability and durability of the rocks as concrete aggregate. Petrographic analysis shows fine-grained texture and predominance of plagioclase (21–60 %) and shaley-muddy lithic fragment, while geochemical analysis classifies the rocks as alkaline. Analysis indicates that the pyroclastics would likely perform marginally well as concrete aggregates, especially in heavy Portland cement concrete and bituminous concrete. This is due to appreciably high values of natural moisture content, low bulk density, relative density and specific gravity, which suggests low durability, high voids and less aggregate absorption in concrete and bitumen mixes. The rocks are rated as moderate to high strength material on the basis of their unconfined compressive strength values, but are very likely to have low durability as buttressed by poor sulphate soundness test results, probably due to high amount of weak minerals. Analyses reveal that the Abakaliki Pyroclastics are not completely satisfactory as concrete aggregates source, despite their origin, texture, strength and economic availability. Hence, caution is required when they are used in concrete projects.     

污水浸泡对水泥土强度和电阻率特性影响的试验研究

为了揭示污水对水泥土的影响规律,并尝试采用电阻率法作为描述强度和污染特征的手段,把粉质黏土和两种水泥（普通硅酸盐水泥、矿渣硅酸盐水泥）制作的水泥土试块分别浸泡在3种液体（自来水、生活污水、造纸厂污水）中模拟环境侵蚀。首先对比分析了污水对土体液塑限的影响,其次研究了龄期、水泥类型、污水类型等对水泥土抗压强度和电阻率的影响,考察了电阻率和抗压强度的关系。结果表明：污染后土样的液限、塑限均增大,塑性指数减小;水泥土抗压强度和电阻率均随龄期增加而增长;污水均降低了水泥土的抗压强度和电阻率,但是矿渣硅酸盐水泥土的抗压强度和电阻率均高于普通硅酸盐水泥土,说明在污水环境中,矿渣水泥对水泥土有一定的抗劣化能力;在不同的龄期、水泥类型、污水类型下,水泥土电阻率均与抗压强度呈现出一致的变化规律,二者线性相关。     

城市河道淤泥特性及改良试验初探

以南京内秦淮河疏浚淤泥为例,通过土工试验、XRD和X射线荧光光谱试验等方法,研究了城市河道淤泥的物理性质、矿物成分、化学成分等特性。试验结果显示:秦淮河淤泥粘粒含量低、有机质含量极高,矿物成分主要有石英和少量粘土矿物等。为了实现淤泥的资源化处理,运用水泥、石灰无机固化材料对淤泥进行固化改良试验及改性土无侧限抗压强度试验,结果表明随着水泥掺量增加,水泥固化土由塑性破坏向脆性破坏过渡,破坏应变在1.8%~2.2%,而石灰固化土均表现为脆性破坏,且破坏应变小于水泥土,为1%左右。水泥固化土28d强度为670kPa,固化效果优于石灰,但略低于处理一般软土的固化土强度。研究结果对处置城市河道淤泥有一定参考价值。     

生态混凝土在治理重金属污染岩质边坡中的应用

通过配合比试验研究了生态混凝土的性能指标并进行了工程应用。在不同级配条件下,对5种试样进行抗压强度与植物生长试验。强度试验结果表明:当生态混凝土原料(减水剂:沸石:水:水泥:石灰石)的配合比为1∶16∶19∶60∶235时,抗压强度满足护坡强度要求;植物生长试验结果表明:当容重为1.89g/cm3,孔隙率为29.1%,吸水率为3.2%时,是护坡植物最优的生长条件;在治理重金属污染岩质边坡工程的应用表明,生态混凝土能有效吸附岩体中的重金属元素,具有良好的护坡与绿化功能。     

聚丙烯纤维加固软土的试验研究

为了研究聚丙烯纤维加固软土的效果和机制,改善石灰土和水泥土的脆性破坏形式。在试验中将纤维按质量百分比为0.05 %,0.15 %和0.25 %的掺量分别掺入到素土、石灰土和水泥土中,按不同的配比配制了20组试样,进行了无侧限抗压强度试验。试验结果显示：纤维的加入能在小范围内提高素土的无侧限抗压强度,并且强度值随纤维掺量的增加而增加;而在石灰土和水泥土中只要掺入少量的纤维就能使无侧限抗压强度值得到极大的提高,增加了石灰土和水泥土的抗拉强度,改善了它们的脆性破坏形式,并使其水稳性得到改善。     

Utilization of bituminous limestone ash from EL-Lajjun area in production of lightweight Masonry block

The following work aims at minimizing the environmental impact of the solid wastes (ash) that is produced after the utilization of the bituminous limestone in thermal power stations and/or retorting processes. The laboratory tests have been selected with respect to construction needs and possible post construction conditions. Utilization of the various types of ash in the production of lightweight concrete block has revealed optimum results. The compressive strength of various ash–glass sand mixes has ranged between 19 and 76 kg/cm² at 28 days. The compressive strength of ash–tuff mixes has ranged between 54 and 63 kg/cm² at 28 days. Ultra light mixtures using ash–polyester with a density of 0.88 kg/m³ and a compressive strength of 21 kg/cm² at 28 days are produced at normal room curing temperature without the use of ordinary Portland cement. The high alkalinity of El-Lajjun ash is considered a disadvantage when utilized in normal concrete mixes for structural purposes. Ash only can be mixed with aggregates to produce lean concrete for blinding purposes for use in foundations.     

牡丹江穆棱沸石矿床矿化分带特征与规律

文章以穆棱沸石矿床为例，探讨了天然沸石矿矿化分带特征与矿石物化性能的空间变化规律。研究表明：矿床不同部位沸石矿化类型的差异变化与碱金属K、Na元素的分异富集特征关系密切；若两者分异富集明显，易形成单一的斜发沸石或丝光沸石矿；反之，则形成混合型沸石矿。由矿体浅部往深部，矿石物化性能的差异变化总体表现为：NH4^ 和K^ 的交换容量、最大热失重值、吸湿率及气体吸附容量等渐趋增大；而矿石的耐酸性和热稳定性却有相反的变化趋势。     

Influence of enzymatic lime on clay mineral behavior

Atterberg Limit Tests, unconfined compressive strength tests, and California Bearing Ratio Tests were conducted on the two minerals—kaolinite and bentonite—after subjecting them to stabilization with lime, enzyme, and enzymatic lime. The purpose of the study was to evaluate the effectiveness of enzymatic lime as a stabilizer over lime and enzyme. Results establish that enzymatic lime stabilization is the better stabilizer in terms of strength development. The unconfined compressive strength and California Bearing Ratio values of enzymatic lime stabilized samples have increased up to 5 and 30 times in the case of kaolinite mineral, but to only less than 1.5 times in the case of bentonite mineral. The study thus indicates that enzymatic lime stabilization is predominantly effective for clays containing kaolinite minerals.     

海底隧道注浆材料强度劣化规律及使用寿命研究

制备了水灰比分别为0.8、1和1.2的纯水泥浆液结石体试块,水灰比为1、粉煤灰掺量10%或20%的水泥-粉煤灰浆液结石体试块,矿粉掺量15%或30%的水泥-矿粉浆液结石体试块,硅粉掺量10%或20%的水泥-硅灰浆液结石体试块。将注浆浆液结石体试块浸泡在海水侵蚀环境中,试块无侧限抗压强度的变化规律。采用灰色关联理论研究了海水浓度、水灰比、矿物掺合料等因素对浆液结石体抗压强度的影响。通过建立多元灰色预测模型分析了海水侵蚀环境下水泥基注浆材料的强度劣化规律及使用寿命。结果表明:强度影响因素的灰色关联度由大到小的排序为:水灰比,海水浓度,测试龄期,硅粉掺量,粉煤灰掺量,矿粉掺量。     

Engineering properties of unfired clay masonry bricks

The shortage of low cost and affordable housing in the UK has led to many investigations into new building masonry materials. Fired clay masonry bricks are conventionally used for mainstream masonry wall construction but suffer from the rising price of energy plus other related environmental problems such as high energy usage and carbon dioxide emission. The use of stabilised unfired clay bricks for masonry construction may solve these problems.This paper reports on the engineering properties of unfired clay bricks produced during the first industrial trial of unfired clay material development carried out at Hanson Brick Company, in Stewartby, Bedfordshire, under the Knowledge Exploitation Fund (KEF) Collaborative Industrial Research Project (CIRP) programme. The mixes were formulated using a locally available industrial by-product (Ground Granulated Blastfurnace Slag — GGBS) which is activated with an alkaline (lime or Portland cement) combined with clay soil. Portland cement was not used in the formulation of the unfired stabilised masonry bricks, except as a control, which is a significant scientific breakthrough for the building industry. Another breakthrough is the fact that only about 1.5% lime was used for GGBS activation. This level of lime is not sufficient for most road construction applications where less strength values are needed and where 3–8% lime is required for effective soil stabilisation. Hence, the final pricing of the unfired clay bricks is expected to be relatively low.The laboratory results demonstrate that the compressive strength, moisture content, rate of water absorption, percentage of void, density and durability assessment (repeated 24-hour freezing/thawing cycles) were all within the acceptable engineering standards for clay masonry units. The paper also discusses on the environmental performance of the unfired clay in comparison to the bricks, used in mainstream construction of today. The bricks produced using this technology can be used for low-medium cost housing and energy efficient masonry wall construction.     

Influence of Liquid Limit and Slaking on Cement Stabilized Clayey Admixtures

Clayey soils, especially clayey soils with high or very high liquid limits (> 60%) often present difficulties in construction operations because they usually contain expansive clay minerals. However, the engineering properties of clay soils can be enhanced by the addition of either cement or lime, thereby producing an improved construction material. In this research, slake durability was related to the liquid limit and unconfined compressive strength of clayey admixtures. Three of the most important components in clay soils, namely, kaolinite, montmorillonite and quartz, were combined to make the clayey admixtures. A slaking value of 45% is suggested as identifying satisfactory stabilization. For clayey admixtures with liquid limit between 40% and 60%, this could be achieved with the addition of between 4% and 12% cement. Clayey admixtures with liquid limits over 60% could only achieve this with large uneconomical amounts of cement (> 12%).     

高含水率疏浚淤泥新型复合固化材料试验研究

基于传统水泥固化处理方法,提出了水泥-生石灰-高分子添加剂新型复合固化材料处理高含水率疏浚淤泥的新方法,以期快速降低淤泥含水率并提高固化淤泥的无侧限抗压强度,拓展水泥固化淤泥的含水率范围,达到高效廉价固化处理高含水率疏浚淤泥的目的。通过系列室内试验,探讨了该方法处理后高含水率淤泥的无侧限抗压强度变化规律以及各材料掺入比对强度的影响规律。研究结果表明,水泥掺入比低于7%的新型固化材料处理初始含水率2倍液限的高液限淤泥,早期强度大于0.5 MPa,28 d强度大于1 MPa;固化淤泥强度随龄期、水泥和生石灰掺入比的增大而增大;给出了考虑多因素多水平的无侧限抗压强度预测公式,预测值与实测值基本一致     

石灰及其外加剂固化天津滨海软土的试验研究

天津滨海软土力学性质较差,不能直接满足工程需要,在软土中加入固化剂能有效提高软土的工程力学性能,但若在固化剂中再添加适量外加剂,又能再次提高固化土的强度。本文以石灰作为主剂,水泥、石膏作为辅剂改良天津滨海软土,以无侧限抗压强度作为固化效果判断标准,同时进行相应的微观结构测试,并对破坏后的试样进行抗压试验。试验结果表明:水泥的最佳掺量仅随石灰掺量不同而变化,如12%的石灰固化土中,水泥掺量不超过3%可以最好地提高石灰固化土强度; 石膏则不能改善土体强度,并且会使土体水稳定性差,遇水开裂。纯石灰固化土及掺外加剂的石灰固化土都是低压缩性土,各种力学性质都得到明显提高,其破坏形式为脆性破坏,破坏后强度很低且不能恢复,在实践中值得重视。微观结构分析表明:固化土中有CSH网状胶凝(水化硅酸钙)、针状钙矾石、无定形文石(CaCO3)、Ca(OH)2晶体等能够填充孔隙、胶结颗粒的物质生成,有效、适量的生成物有利于固化土强度的提高。土体中总孔隙个数及总颗粒个数都随荷载的增加而增多,孔隙面积、孔隙等效直径及颗粒等效直径都随荷载的增加而减少。