Merapi (Java,Indonesia): anatomy of a killer volcano

Merapi is Indonesia's most dangerous volcano with a history of deadly eruptions. Over the past two centuries, the volcanic activity has been dominated by prolonged periods of lava dome growth and intermittent gravitational or explosive dome failures to produce pyroclastic flows every few years. Explosive eruptions, such as in 2010, have occurred occasionally during this period, but were more common in pre‐historical time, during which a collapse of the western sector of the volcano occurred at least once. Variations in magma supply from depth, magma ascent rates and the degassing behaviour during ascent are thought to be important factors that control whether Merapi erupts effusively or explosively. A combination of sub‐surface processes operating at relatively shallow depth inside the volcano, including complex conduit processes and the release of carbon dioxide into the magmatic system through assimilation of carbonate crustal rocks, may result in unpredictable explosive behaviour during periods of dome growth. Pyroclastic flows generated by gravitational or explosive lava dome collapses and subsequent lahars remain the most likely immediate hazards near the volcano, although the possibility of more violent eruptions that affect areas farther away from the volcano cannot be fully discounted. In order to improve hazard assessment during future volcanic crises at Merapi, we consider it crucial to improve our understanding of the processes operating in the volcano's plumbing system and their surface manifestations, to generate accurate hazard zonation maps that make use of numerical mass flow models on a realistic digital terrain model, and to utilize probabilistic information on eruption recurrence and inundation areas.     

Extracting the damaging effects of the 2010 eruption of Merapi volcano in Central Java, Indonesia

This research focuses on providing information related to the damaging effects of the 2010 eruption of Merapi volcano in Central Java, Indonesia. This information will be used to help emergency responders to assess losses more timely and efficiently, and to monitor the progress in emergency response and recovery. The objectives of this research are: (a) to generate a map of pyroclastic deposits based on activities pre- and post-volcano eruption of 2010 in the research area, (b) to investigate the impact of volcano eruption on the environment, and (c) to assess the impact of volcano eruption on landuse. ALOS PALSAR remote sensing data pre- and post-disaster were used in this research for mapping the volcano eruption. Topographic and geomorphological maps were analyzed for profiling and field orientation, which were used to investigate the impact of volcano eruption on the environment. SPOT 4 satellite images were used in this research for updating landuse information from the topographic map. The result of the landuse updated data was used for assessment of the volcano eruption’s impact on landuse with the GIS raster environment. The volcanic eruption that occurred in 2010 is estimated to have an impact of 133.31 ha for settlements, 92.32 ha for paddy fields, 235.60 ha for dry farming, 570.98 ha for plantations, 380.86 ha for bare land, and 0.12 ha for forest areas. An estimate of the number of buildings damaged due to the volcano eruption in 2010 was carried out by overlaying a map of pyroclastic deposits and the information point of the building sites from the topographic map. The total number of buildings damaged is estimated to be around 12,276 units.     

Pseudotachylite on impact marks of block surfaces in block-and-ash flows at Merapi volcano, Central Java, Indonesia

Surfaces of meter-sized blocks in the 1998 block-and-ash flow deposits of Merapi volcano are partially covered by centimeter-sized, randomly orientated impact marks, which consist of an outer, glassy pseudotachylite underlain by a cataclastic layer. Whole rock, pseudotachylite, melt inclusion in plagioclase and host rock groundmass compositions indicate that the pseudotachylite was generated by remelting of bulk rock on block impact. The occurrence and distribution of this new type of collision-related pseudotachylite on volcanic block surfaces demonstrate that blocks were transported by chaotic rotation, saltation and tumbling. The random orientation of impact marks suggests grain flow as the dominant process rather than any other currently discussed pyroclastic flow mechanism. In addition, the chaotic orientation of striations is interpreted as reflecting momentum transfer having been dominated by short-lived intergranular collisions. The blocks have apparently been transported in the collisional regime of grain flow.     

Transition from calc-alkaline to potassium-rich magmatism in subduction environments: geochemical and Sr, Nd, Pb isotopic constraints from the island of Vulcano (Aeolian arc)

The problem of mantle metasomatism vs. crustal contamination in the genesis of arc magmas with different potassium contents has been investigated using new trace element and Sr–Nd–Pb isotopic data on the island of Vulcano, Aeolian arc. The analysed rocks range in age from 120 ka to the present day, and cover a compositional range from basalt to rhyolite of the high-K calc-alkaline (HKCA) to shoshonitic (SHO) and potassic (KS) series. Older Vulcano products (>30 ka) consist of HKCA–SHO rocks with SiO₂=48–56%. They show lower contents of K₂O, Rb and of several other incompatible trace element abundances and ratios than younger rocks with comparable degree of evolution. ⁸⁷Sr/⁸⁶Sr ranges from 0.70417 to 0.70504 and increases with decreasing MgO and compatible element contents. ²⁰⁶Pb/²⁰⁴Pb ratios display significant variations (19.31 to 19.76) and are positively correlated with MgO, ¹⁴³Nd/¹⁴⁴Nd (0.512532–0.512768), ²⁰⁷Pb/²⁰⁴Pb (15.66–15.71) and ²⁰⁸Pb/²⁰⁴Pb (39.21–39.49). Overall, geochemical and isotopic data suggest that the evolution of the older series was dominated by assimilation–fractional crystallisation (AFC) with an important role for continuous mixing with mafic liquids. Magmas erupted within the last 30 ka consist mostly of SHO and KS intermediate and acid rocks, with minor mafic products. Except for a few acid rocks, they display moderate isotopic variations (e.g. ⁸⁷Sr/⁸⁶Sr=0.70457–0.70484; ²⁰⁶Pb/²⁰⁴Pb=19.28–19.55, but ²⁰⁷Pb/²⁰⁴Pb=15.66–15.82), which suggest an evolution by fractional crystallisation, or in some cases by mixing, with little interaction with crustal material. The higher Sr isotopic ratios (⁸⁷Sr/⁸⁶Sr=0.70494–0.70587) of a few, low-volume, intermediate to acid rocks support differentiation by AFC at shallow depths for some magma batches. New radiogenic isotope data on the Aeolian islands of Alicudi and Stromboli, as well as new data for lamproites from central Italy, are also reported in order to discuss along-arc compositional variations and to evaluate the role of mantle metasomatism. Geochemical and petrological data demonstrate that the younger K-rich mafic magmas from Vulcano cannot be related to the older HKCA and SHO ones by intra-crustal evolutionary processes and point to a derivation from different mantle sources. The data from Alicudi and Stromboli suggest that, even though interaction between magma and wall rocks of the Calabrian basement during shallow level magma evolution was an important process locally, a similar interpretation can be extended to the entire Aeolian arc. Received: 27 September 1999 / Accepted: 24 May 2000     

Izu-Bonin arc subduction under the Honshu island,Japan: Evidence from geological and seismological aspect

The Izu-Bonin intra-oceanic arc with 20–35 km thick continental crust is being subducted under the Honshu, presumably since 17 Ma. Tomographic image clearly demonstrates that the whole Izu-Bonin arc is subducting under the Honshu arc. Geologic cross section and the thickness of continental crust do not support the accretion of thick crust in spite of the continued subduction over 17 Ma.     

Izu-Bonin arc subduction under the Honshu island, Japan: Evidence from geological and seismological aspect

The Izu-Bonin intra-oceanic arc with 20–35 km thick continental crust is being subducted under the Honshu, presumably since 17 Ma. Tomographic image clearly demonstrates that the whole Izu-Bonin arc is subducting under the Honshu arc. Geologic cross section and the thickness of continental crust do not support the accretion of thick crust in spite of the continued subduction over 17 Ma.     

The origin of medium-K ankaramitic arc magmas from Lombok (Sunda arc, Indonesia): Mineral and melt inclusion evidence

High-calcium, nepheline-normative ankaramitic basalts (MgO > 10 wt.%, CaO/Al₂O₃ > 1) from Rinjani volcano, Lombok (Sunda arc, Indonesia) contain phenocrysts of clinopyroxene and olivine (Fo_85–92) with inclusions of spinel (Cr# 58–77) and crystallised melt. Olivine crystals have variable but on average low NiO (0.10–0.23 wt.%) and high CaO (0.22–0.35 wt.%) contents for their forsterite number. The CaO content of Fo_89–91 olivine is negatively correlated with the Al₂O₃ content of enclosed spinel (9–15 wt.%) and positively correlated with the CaO/Al₂O₃ ratios of melt inclusions (0.9–1.5). Major and trace element patterns of melt inclusions are similar to that of the host rock, indicating that the magma could have formed by accumulation of small batches of melt, with compositions similar to the melt inclusions. The liquidus temperature of the magma was  1275 °C, and its oxygen fugacity ≤ FMQ + 2.5. Correlations between K₂O, Zr, Th and LREE in the melt inclusions are interpreted to reflect variable degrees of melting of the source; correlations between Al₂O₃, Na₂O, Y and HREE are influenced by variations in the mineralogy of the source. The melts probably formed from a water-poor, clinopyroxene-rich mantle source.     

Constraints on the source of Cu in a submarine magmatic-hydrothermal system,Brothers volcano,Kermadec island arc

Most magmatic-hydrothermal Cu deposits are genetically linked to arc magmas. However, most continental or oceanic arc magmas are barren, and hence new methods have to be developed to distinguish between barren and mineralised arc systems. Source composition, melting conditions, the timing of S saturation and an initial chalcophile element-enrichment represent important parameters that control the potential of a subduction setting to host an economically valuable deposit. Brothers volcano in the Kermadec island arc is one of the best-studied examples of arc-related submarine magmatic-hydrothermal activity. This study, for the first time, compares the chemical and mineralogical composition of the Brothers seafloor massive sulphides and the associated dacitic to rhyolitic lavas that host the hydrothermal system. Incompatible trace element ratios, such as La/Sm and Ce/Pb, indicate that the basaltic melts from L’Esperance volcano may represent a parental analogue to the more evolved Brothers lavas. Copper-rich magmatic sulphides (Cu?>?2 wt%) identified in fresh volcanic glass and phenocryst phases, such as clinopyroxene, plagioclase and Fe–Ti oxide suggest that the surrounding lavas that host the Brothers hydrothermal system represent a potential Cu source for the sulphide ores at the seafloor. Thermodynamic calculations reveal that the Brothers melts reached volatile saturation during their evolution. Melt inclusion data and the occurrence of sulphides along vesicle margins indicate that an exsolving volatile phase extracted Cu from the silicate melt and probably contributed it to the overlying hydrothermal system. Hence, the formation of the Cu-rich seafloor massive sulphides (up to 35.6 wt%) is probably due to the contribution of Cu from a bimodal source including wall rock leaching and magmatic degassing, in a mineralisation style that is hybrid between Cyprus-type volcanic-hosted massive sulphide and subaerial epithermal–porphyry deposits.     

The origin of the potassic rock suite from Batu Tara volcano (East Sunda Arc, Indonesia)

atu Tara is an active potassic volcano in the eastern Sunda arc. Its leucite-bearing rock suite can be subdivided into two groups, one less evolved with Th<20 ppm, the other more evolved with Th>20 ppm. ⁸⁷Sr/⁸⁶Sr, δ¹⁸O and trace-element systematics in the less evolved group suggests that existence of parental magmas with different mantle origins. The mantle below Batu Tara is most likely heterogeneous and several source components are involved in magma genesis. Trace element and isotopic compositions of Batu Tara and adjacent volcanoes are consistent with the involvement of a subducted sedimentary/crustal component as well as MORB and OIB mantle, the latter with geochemical characteristics comparable to the mantle underlying Muriah (Java). Melt extraction from this complex mixture is envisioned as a two-stage process: partial melts of the crust-contaminated MORB mantle mix in the mantle wedge with partial melts of OIB domains. Different mixtures of these two melts provide the parental magmas that enter the volcanic plumbing system, where crystallization, hybridization and refilling processes occur. The calcalkaline volcanoes in the arc segment show stronger signatures for a subducted crustal component than Batu Tara, which displays a greater influence from the OIB mantle source. The potassium enrichment can therefore be attributed to contributions both from the enriched mantle and from subducted crustal material. Mantle-type δ¹⁸O values of the Batu Tara magmas indicate that the mantle wedge below potassic orogenic volcanoes is not necessarily strongly enriched in ¹⁸O.     

龙木错—双湖古特提斯洋俯冲记录——羌塘中部日湾茶卡早石炭世岛弧火山岩

尽管龙木错—双湖结合带经历早古生代—三叠纪的长期演化过程,但已有资料显示羌塘中部沿该带的岩浆活动主要与碰撞作用有关,仍缺乏与俯冲相关火成岩的报道。报道龙木错—双湖结合带西段日湾茶卡东的一套那底岗日组火山岩中安山岩的年龄、岩石及地球化学特征,利用LA-ICP-MS方法测得安山岩锆石U-Pb年龄为330.6±2.8Ma,表明火山活动的时间为早石炭世。该套岩石因遭受硅质流体交代,SiO2含量变化较大（54.84%~72.84%）,在Nb/Y-Zr/TiO2×0.00001图解中全部落入安山岩区,属于低—中钾钙碱性系列;微量元素蛛网图明显富集Rb、Th、U等大离子亲石元素,亏损Nb、Ta、Ti等高场强元素,具火山岛弧特征。日湾茶卡安山岩是在羌塘中部发现的早石炭世岛弧型火山岩,为龙木错—双湖古特提斯洋盆晚古生代俯冲作用提供直接的年代学和岩石学证据。     

Specific features of the mineral composition and petromagnetic properties of rocks from the Minami-Khiosi submarine volcano (Mariana island arc)

Complex studies of the mineral composition and petromagnetic properties of the rocks which compose an edifice of the Minami–Khiosi submarine volcano located in the Mariana island arc are carried out for the first time. The Minami–Khiosi Volcano is a part of the Khiosi volcanic complex within the alkaline province of the Idzu–Bonin and Mariana island arcs. All of the rocks analyzed are enriched in K₂O (1.34–3.30%), Ba (370–806 ppm), and Sr (204–748 ppm). The basalt has a porhyric texture and contains mosTy olivine phenocrysts as individual crystals and growths with a size up to 2 cm; the groundmass is finecrystalline. The samples studied contain at least three Fe-bearing oxide minerals. These are predominant magnetite and less abundant ilmenite and Fe hydroxides. It is established that the samples studied are magnetically isotropic and have high values of natural remanent magnetization and Königsberger ratio. Similarly to the other island-arc Late Cenozoic submarine volcanoes in the western part of the Pacific Ocean, the samples studied are strongly differentiated by the value of natural remanent magnetization and magnetic susceptibility. The low-coercivity magnetic minerals (titanomagnetite and magnetite) of the pseudo-single-domain structure, as well as high-coercivity minerals (hematite) are the main carriers of magnetization. The high values of natural remanent magnetization are explained by the pseudo-single-domain structure of the titanomagnetite grains, whereas the high values of magnetic susceptibility result from the high concentration of ferromagnetic grains.     

The systematics of chlorine, fluorine, and water in Izu arc front volcanic rocks: Implications for volatile recycling in subduction zones

We studied the systematics of Cl, F and H₂O in Izu arc front volcanic rocks using basaltic through rhyolitic glass shards and melt inclusions (Izu glasses) from Oligocene to Quaternary distal fallout tephra. These glasses are low-K basalts to rhyolites that are equivalent to the Quaternary lavas of the Izu arc front (Izu VF). Most of the Izu glasses have Cl ∼400-4000 ppm and F ∼70-400 ppm (normal-group glasses). Rare andesitic melt inclusions (halogen-rich andesites; HRA) have very high abundances of Cl (∼6600-8600 ppm) and F (∼780-910 ppm), but their contents of incompatible large ion lithophile elements (LILE) are similar to the normal-group glasses. The preeruptive H₂O of basalt to andesite melt inclusions in plagioclase is estimated to range from ∼2 to ∼10 wt% H₂O. The Izu magmas should be undersaturated in H₂O and the halogens at their preferred levels of crystallization in the middle to lower crust (∼3 to ∼11 kbar, ∼820° to ∼1200°C). A substantial portion of the original H₂O is lost due to degassing during the final ascent to surface. By contrast, halogen loss is minor, except for loss of Cl from siliceous dacitic and rhyolitic compositions. The behavior of Cl, F and H₂O in undegassed melts resembles the fluid mobile LILE (e.g.; K, Rb, Cs, Ba, U, Pb, Li). Most of the Cl (>99%), H₂O (>95%) and F (>53%) in the Izu VF melts appear to originate from the subducting slab. At arc front depths, the slab fluid contains Cl = 0.94 ± 0.25 wt%, F = 990 ± 270 ppm and H₂O = 25 ± 7 wt%. If the subducting sediment and the altered basaltic crust were the only slab sources, then the subducted Cl appears to be almost entirely recycled at the Izu arc (∼77-129%). Conversely, H₂O (∼13-22% recycled at arc) and F (∼4-6% recycled) must be either lost during shallow subduction or retained in the slab to greater depths. If a seawater-impregnated serpentinite layer below the basaltic crust were an additional source of Cl and H₂O, the calculated percentage of Cl and H₂O recycled at arc would be lower. Extrapolating the Izu data to the total length of global arcs (∼37,000 km), the global arc outflux of fluid-recycled Cl and H₂O at subduction zones amounts to Cl ∼2.9-3.8 × 10¹² g/yr and H₂O ∼0.7-1.0 × 10¹⁴ g/yr, respectively—comparable to previous estimates. Further, we obtain a first estimate of global arc outflux of fluid-recycled F of ∼0.3-0.4 × 10¹²g/yr. Despite the inherent uncertainties, our results support models suggesting that the slab becomes strongly depleted in Cl and H₂O in subduction zones. In contrast, much of the subducted F appears to be returned to the deep mantle, implying efficient fractionation of Cl and H₂O from F during the subduction process. However, if slab devolatilization produces slab fluids with high Cl/F (∼9.5), slab melting will still produce components with low Cl/F ratios (∼0.9), similar to those characteristic of the upper continental crust (Cl/F ∼0.3-0.9).     

海南岛古生代弧状构造带的特征及其地质意义

海南岛古生代弧状构造带发育于EW向九所-陵水构造带以北的广大地区,席卷中元古界至晚古生界,生成于海西期,并持续至印支期,控制了同期的岩浆作用、成矿作用和沉积盆地西浅东深的古地理格局。通过对该弧状构造带的构造特征、构造演化及动力学背景进行的探讨,研究认为,其生成可能与古特提斯收缩闭合有关,并呈现出由西向东的剪式闭合特征。而弧状构造带的厘定将为海南岛基础地质的研究以及地质找矿工作带来新的启发。     

Shallow submarine volcano group in the early stage of island arc development: Geology and petrology of small islands south off Hahajima main island,the Ogasawara Islands

Small Islands south off Hahajima, the southernmost of the Ogasawara Archipelago, consist of primitive basalts (<12 wt.% MgO) to dacite erupted during the transitional stage immediately following boninite volcanism on the incipient arc to sustained typical oceanic arc. Strombolian to Hawaiian fissure eruptions occurring on independent volcanic centers for the individual islands under a shallow sea produced magnesian basalt to dacite fall-out tephras, hyaloclastite and a small volume of pillow lava, which were intruded by NE-trending dikes. These volcanic strata are correlated to the upper part (<40 Ma) of the Hahajima main island. Volcanic rock samples have slightly lower FeO^*/MgO ratios than the present volcanic front lavas, and are divided into three types with high, medium and low La/Yb ratios. Basalt to dacite of high- and medium-La/Yb types show both tholeiitic (TH) and calc-alkaline (CA) differentiation trends. Low-La/Yb type belongs only to TH basalt. The multiple magma types are coexistence on the each island. TH basalts have phenocrysts of olivine, clinopyroxene and plagioclase, while CA basalts are free from plagioclase phenocrysts.     

Magma source components in an arc-continent collision zone: the Flores-Lembata sector,Sunda arc,Indonesia

Major, trace-element, and Sr-, Nd-and Pbisotope data are presented for volcanics from 12 active or recently active volcanoes from the islands of Flores, Adonara, Lembata and Batu Tara in the eastern Sunda are. The volcanics vary in composition from low-K tholeiite, through medium-and high-K calcalkaline types to the K-rich leucite basanites of Batu Tara. From the tholeiites to the leucite basanites there are marked increases in the concentrations of LILE (K, Rb, Ba, Sr), LREE and La/Yb, and all the volcanics have high Ba/ Nb, La/Nb and Ba/La compared with mid-ocean ridge and intraplate eruptives. K/Cs values are generally lower than OIB values, and overlap those of other arc volcanics and northeast Indian Ocean sediments. The volcanics exhibit a broad range of ⁸⁷Sr/⁸⁶Sr (0.70468–0.70706), ¹⁴³Nd/¹⁴⁴Nd (0.512946–0.512447), and a moderate range in ²⁰⁶Pb/²⁰⁴Pb (18.825–19.143), ²⁰⁷Pb/ ²⁰⁴Pb (15.643–15.760) and ²⁰⁸Pb/²⁰⁴Pb (38.97–39.51). Trace-element and isotopic data suggest that the mantle beneath the eastern Sunda arc is a complex heterogeneous mixture of 3 or 4 major source components: MORB-source or depleted MORB-source, OIB-source and subducted Indian Ocean sediment. The low-K tholeiites were probably formed by relatively large degrees of melting of depleted MORB-source mantle, modified by subduction-related fluids, whereas the trace-element and isotopic characteristics of the K-rich volcanics suggest that they were derived from an OIB source which and been modified by a subduction-related melt component. The source components of the medium-to high-K calcalkaline rocks are more difficult to determine, and probably include mixtures of MORB-source or OIB-source, and melt/fluid derived from subducted oceanic sediment. Minor-and trace-element modelling calculations indicate substantial difficulties in producing the relatively low Ti-contents of arc volcanics by melting OIB-source mantle. Where OIB mantle is considered to be an important component of arc magmas it is suggested that the HFSE are buffered to relatively low concentration by a residual Ti-rich accessory phase.     

High- to ultrahigh-pressure (UHP) ductile shear zones in the Sulu UHP metamorphic belt, China: implications for continental subduction and exhumation

High‐ to ultrahigh‐pressure (HP‐UHP) metamorphic rocks that resulted from deep continental subduction and subsequent exhumation in the Sulu orogenic belt, China, have experienced multiphase deformation and metamorphic overprint during its long journey to the mantle and return to the surface. HP‐UHP shear zones are strain‐localized weak zones on which the UHP slab is transported over long distances. HP‐UHP shear zones are well exposed along a 200‐km belt in the Sulu UHP metamorphic belt. The shear zones lie structurally below the UHP rocks and above the non‐UHP rocks, suggesting the early exhumation of the UHP rocks by thrusting. The large area distribution, HP‐UHP nature, high strain and structural association of the shear zones with the UHP rocks suggest that the shear zones are probably a regional detachment developed during the early stage of exhumation of the UHP rocks. Kinematic indicators suggest top‐to‐the N–NW motion of the UHP slab during the exhumation, which, combined with isotope signature in Mesozoic igneous rocks, leads us to the interpretation that the subduction polarity is the North China plate down to the south rather than the Yangtze plate down to the north in the Sulu region.     

Fluids in deep subduction zones: Features,compositions and related geochemical fractionations

<正>Plate subduction is the most magnificent process in the Earth.Subduction zones are important sites for proceeding matter-and energy-transports between the Earth’s surface and the interior,continental crust growth,and crust-mantle interactions.Besides,a number of geological processes in subduction zones are closely related to human beings’daily life,e.g.volcanic eruptions and earthquakes,formation of mineral deposits,etc.Subduction     

Subaqueous density flow processes and deposits of an island volcano landslide (Stromboli Island, Italy)

Stromboli is a 3000 m high island volcano, rising to 900 m above sea-level. It is the most active volcano of the Aeolian Archipelago in the Tyrrhenian Sea (Italy). Major, large volume (1 km³) sector collapses, four occurring in the last 13 kyr, have played an important role in shaping the north-western flank (Sciara del Fuoco) of the volcano, potentially generating a high-risk tsunami hazard for the Aeolian Islands and the Italian coast. However, smaller volume, partial collapses of the Sciara del Fuoco have been shown to be more frequent tsunami-generating events. One such event occurred on 30 December 2002, when a partial collapse of the north-western flank of the island took place. The resulting landslide generated 10 m high tsunami waves that impacted the island. Multibeam bathymetry, side-scan sonar imaging and visual observations reveal that the landslide deposited 25 to 30 × 10⁶ m³ of sediment on the submerged slope offshore from the Sciara del Fuoco. Two contiguous main deposit facies are recognized: (i) a chaotic, coarse-grained (metre-sized to centimetre-sized clasts) deposit; and (ii) a sand deposit containing a lower, cross-bedded sand layer and an upper structureless pebbly sand bed capped by sea floor ripple bedforms. The sand facies develops adjacent to and partially overlying the coarse deposits. Characteristics of the deposits suggest that they were derived from cohesionless, sandy matrix density flows. Flow rheology and dynamics led to the segregation of the density flow into sand-rich and clast-rich regions. A range of density flow transitions, both in space and in time, caused principally by particle concentration and grain-size partitioning within cohesionless parent flows was identified in the deposits of this relatively small-scale submarine landslide event.     

Cenozoic Island Arc Magmatism in Java Island (Sunda Arc, Indonesia): Clues on Relationships between Geodynamics of Volcanic Centers and Ore Mineralization

Abstract. Java island, regarded as a classic example of island arcs, is built through multi events of Cenozoic arc magmatism produced by the subduction of Indian‐Australian oceanic crusts along the southern margin of Eurasian plate. Regional crustal compositions, subducted slabs, and tectonics determined the spatial‐geochemical evolution of arc magmatism and regional metallogeny. Tertiary geodynamics of island arc was dominated by backarc‐ward migrations of volcanic centers. Only after the Miocene‐Pliocene roll‐back effects of retreating slab, slab detachment, and backarc magmatism took place in central Java. The source of arc magmas is mainly partial melting of mantle wedge, triggered by fluids released from dehydrated slabs. Increasing potassium contents of arc magmas towards the backarc‐side and younger magmas is typical for all magmas, while alkali and incompatible trace elements ratios are characteristics for different settings of volcanic centers. The oceanic nature of crust and the likely presence of hot slab subducted beneath the eastern Java determine the occurrences of adakitic magmas. Backarc magmatism has a deeper mantle source with or without contributions from subduction‐related materials. The domination of magnetite‐series magmatism determines the sulfide mineralization for the whole island. District geology, geodynamics, and magma compositions in turn control particular styles and scales of precious metals concentrations. Deep‐seated crustal faults have focused the locations of overlapping volcanic centers and metalliferous fluids into few major gold districts. Porphyry deposits are mostly concentrated within Lower Tertiary (early stage) volcanic centers in eastern Java which are not covered by younger volcanic centers, and whose sulfides are derived from partial melting of basaltic parental materials. On the other hand, high‐grade low‐sulfidation epithermal gold deposits formed in later stages of arc development and are spatially located within younger volcanic centers (Upper Miocene‐Pliocene) that overlap the older ones. Gold in low‐sulfidation epithermal system is likely to be derived from crustal materials. The overall interacting factors resulting in the petrochemical systematics that are applicable for exploration: 1) early‐stage volcanic centers with high Sr/Y and Na₂O/K₂O ratios are more prospective for porphyry mineralization, while 2) later‐stage volcanic centers with high K₂O, total alkali, and K₂O/Na₂O ratios are more prospective for low‐sulfidation epithermal mineralization.     

Trace Element and Sr, Nd, Pb and O Isotope Variations in Medium-K and High-K Volcanic Rocks from Merapi Volcano, Central Java, Indonesia: Evidence for the Involvement of Subducted Sediments in Sunda Arc Magma Genesis

Merapi volcano (Central Java), located within the Quaternaryvolcanic front of the Sunda arc, is one of the most active volcanoesof the Indonesian archipelago. During the Holocene, Merapi eruptedbasalts and basaltic andesites of medium-K affinity during itsearlier stages of activity and high-K compositions over thepast