Evidence on target factors used for port state control inspections

Target factors aim at setting criteria to select foreign vessels that should be inspected by port state control authorities. Although a relative consensus exists on the main factors to consider in selecting vessels, the weight to be given to these factors is still unclear. Using data on 26 515 PSC inspections that took place within the Indian Ocean MoU region from 2002 to 2006, we investigate the determinants of the number of deficiencies and of the probability of detention. Our results show that the main contributors to detention are the age of the vessel at inspection (40%), the recognised organization (31%) and the place where the inspection occurs (17%). Also, differences in detention rates amongst various inspecting authorities are essentially explained by differences in the characteristics of vessels calling in a specific country rather than by differences in the way inspections are done.     

Econometric analysis on the effect of port state control inspections on the probability of casualty: Can targeting of substandard ships for inspections be improved?

This article is based on 183,819 port state control inspections from various port state control regimes and casualties from three different data sources for a time period of 6 years. It is the first time an analysis on a combined dataset of this magnitude has been performed. Binary logistic regression is used to measure the effect of inspections on the probability of casualty, which can be measured for very serious casualties but not for serious or less serious casualties. In addition, the magnitude of improvement areas for targeting substandard vessels is determined and the models further show how targeting of substandard ships on a combined dataset can be improved. In addition, the analysis also compares the fishing fleet with the commercial fleet.     

Identifying substandard vessels through Port State Control inspections: A new methodology for Concentrated Inspection Campaigns

Substandard vessels that fail to comply with international maritime regulations are the target of Port State Control inspections. Despite their significant costs, many inspections do not lead to any detentions and, in a significant number of cases, no deficiencies are detected. In this paper, quantile regressions for count data are used to estimate the likelihood of having a high number of deficiencies of a specific type. The purpose is to complement existing practices focusing on detention with the objective to improve the selection process. Similar factors influence the likelihood of having a vessel detained and that of having a vessel recording a high number of deficiencies. However, quantile regressions applied to the number of deficiencies help improving the identification of factors influencing the likelihood of finding some specific types of deficiencies, which is the focus of Concentrated Inspection Campaigns. The paper concludes that the selection process for such campaigns should be improved using this new methodology.     

Analysis of ship life cycles—The impact of economic cycles and ship inspections

Due to the shipping industry's international legal framework, there are loopholes in the system, which can increase the risk of incidents with high economic costs due to the substandard operation of vessels. This article uses duration analysis and through the creation of ship life cycles provides insight into the effectiveness of inspections on prolonging ship lives. The analysis accounts for fluctuations in the relevant economic environment and the (possibly time-varying) ship particulars. It is based on a unique dataset containing information on the timing of accidents, inspections and ship particular changes of more than 50,000 vessels over a 29-year time period (1978–2007). The results reveal that the shipping industry is a relatively safe industry but there is a possible over-inspection of vessels. The effect of inspections varies across ship types and the prevention of incidents with high economic costs can be improved by a coordinated approach of all types of inspections that are performed which allows the decrease of unnecessary inspections. Further, more emphasis should be placed on the rectification and follow-up of deficiencies and the implementation of the ISM code. Another added benefit for the industry would be to improve transparency related to class withdrawals and class transfers for all classification societies. Another interesting finding is that for the majority of ship types, an increase in earnings decreases the incident rate. This is in contrast to the industry perception of the impact of earnings.     

基于风险的海洋结构物无损检测功能的分级

提出了基于风险的海洋结构物无损检测功能分级方法,采用检测概率、错误识别概率和裂纹出现概率度量检测功能,并修正了错误识别概率的取值范围。根据风险值对无损检测功能进行了分级,研究了风险值随检测概率、错误识别概率和裂纹出现概率的变化规律,分析了风险值对检测费用、维修费用及失效费用的敏感性。在此基础上,将基于风险的海洋结构物无损检测功能分级方法应用于优化检测策略,用算例证明了文中所提方法的有效性。     

The rise and fall of factory trawlers: An eclectic approach

Factory trawlers are the most controversial vessel group in Norwegian fisheries. At the time the fleet emerged, stern trawling in combination with on-board processing of cod fillets was regarded as a major innovation. However, the deep-sea fleet was intended to be a stable supplier of fish to the land-based industry. Factory trawlers were not a part of the political project. On the contrary, the vessels represented a serious departure from the traditional employment system for the fisheries’ dependent districts. Factory trawlers have, since the seventies, been regarded as the main enemy to the coastal vessels and the land-based industry. The vessels have been subject to a profound debate about several built-in contradictory goals for the fisheries policy, such as the ideal of employment for all and the need for a profitable sector without state subsidies. Despite a series of policy-driven initiatives to remove the factory trawlers, the fleet has been one of the most profitable vessel groups in the Norwegian fisheries. Nonetheless, the fleet is now marginalised in the number of vessels and transformed into an obedient supplier of round fish to the land-based industry. In this article, we outline the history of the Norwegian factory trawlers and how the fleet was subject to a series of critical changes reflecting the complexity of the vessels.     

环渤海地区港口建设中的环境工程地质问题

环渤海地区地壳稳定性较差,沿海地带软土地基、沙土液化等不良工程地质问题较多,存在崩塌、滑坡、侵蚀淤积等环境地质灾害。特别是由地下水开采引起的地下水位下降漏斗、地面沉降、海水入侵等灾害严重。本文章介绍了环渤海港口工程地质环境,并就原生地质环境、次生地质环境、人为地质环境对港口建设的影响进行论述。     

国际海上救援效率比较研究 ——以东海特定水域为例

为研究东海海域海上救援效率和国际协作的协调性,以国际救援为视角,基于ArcGIS构建了海事救援效率评价模型。根据巡逻船舶密度数据确定了救援船舶的概率分布,得出了救援船舶与遇险船舶的可能距离,同时考虑了风浪影响下遇险船舶的漂移以及巡逻船舶失速的情况,分别计算了常风向和次常风向下中国、日本和韩国在东海特定水域的海上救援效率。结果表明:以各国现有的巡逻船舶配备对研究区内漂移的遇险船舶展开救援时,常风向下先后抵达的顺序为韩国、日本和中国,驰援时间分别为5.14、8.18和9.67 h;次常风向下抵达的顺序为韩国、日本和中国,驰援时间分别为5.45、8.25和10.08 h;为提高我国的救援效率,需要在东海海域部署9～10艘巡逻船舶开展常态化巡逻。本文研究可为我国有关部门科学制定和完善海上救援方案,调整海上救援力量配备,进一步加强国际间的协调与合作提供参考。     

Effect of criteria on seakeeping performance assessment

The overall performance of ships depends on the seakeeping performance in specified sea areas where the vessel is designed to operate. The seakeeping performance procedure is based upon the probability of exceeding specified ship motions in a sea environment particular to the vessel's mission. Given the operational area of the vessel, the percentage of time the vessel operates in a particular sea state can be determined from an oceanographic database through application of the response amplitude operators. The predicted motions are compared to the motion limiting criteria to obtain the operability indices. However, the operability indices are strongly affected by the chosen limiting criteria. This is particularly the case for passenger vessels where many conflicting criteria are used to assess the effect of motions and accelerations on comfort and well-being of passengers. This paper investigates the effect of seakeeping criteria on seakeeping performance assessment for passenger vessels. Conventional seakeeping performance measures are evaluated for various levels of vertical accelerations defined by the ISO 2631 standard. It is shown that the estimated seakeeping performance of a passenger vessel greatly depends on the level of limiting value selected as the seakeeping criteria.     

An ROV Stereovision System for Ship-Hull Inspection

Ship hulls, as well as bridges, port dock pilings, dams, and various underwater structures need to be inspected for periodic maintenance. Additionally, there is a critical need to provide protection against sabotage activities, and to establish effective countermeasures against illegal smuggling activities. Unmanned underwater vehicles are suitable platforms for the development of automated inspection systems, but require integration with appropriate sensor technologies. This paper describes a vision system for automated ship-hull inspection, based on computing the necessary information for positioning, navigation, and mapping of the hull from stereo images. Binocular cues are critical in resolving a number of complex visual artifacts that hamper monocular vision in shallow-water conditions. Furthermore, they simplify the estimation of vehicle pose and motion, which is fundamental for successful automatic operation. The system has been implemented on a commercial remotely operated vehicle (ROV), and tested in pool and dock tests. Results from various trials are presented to demonstrate the system capabilities     

Globalisation and de-regulation in the maritime industry

The development of the Flags of Convenience (FOC) system has had serious repercussions for labour as shipowners, in search of cheaper crews, have recruited ‘crews of convenience’ from developing nations. This paper examines the record of FOCs to analyse the effects of globalisation upon the working lives of seafarers. The method used will be to compare the regimes of FOCs, and this will be done by the analysis of a flag state conformance index (FLASCI) created by the authors, which utilises a large number of measures of a state's capacity to maintain and enforce a regulatory regime for the vessels flying its flag.     

Compliance with international emission regulations: Reducing the air pollution from merchant vessels

In September 1997, the International Maritime Organization (IMO) adopted an international convention protocol to reduce air pollution from ships, in order to achieve sustainable maritime development. This protocol has been approved by 15 member countries and will be enforced in May 2005. Pollutants emitted from ships, such as nitrogen oxides, volatile organic compounds, sulfur oxides, etc. will be regulated by this convention through ship inspections and issuance of certificates. Ships belonging to maritime countries such as Taiwan, which sail around the world and berth in commercial ports, must obey this convention. This study has investigated possible strategies, which may be adopted by maritime countries to conform to this IMO convention in order to reduce the air pollution from ships. A sea-going ship must prepare EIAPP and IAPP certificates for inspection by port-state-control officials, when the ship is anchored at a maritime port. These port-state-control officials may also require the continuous detection and sampling of a ship's emissions, while it is berthed at the port. Legislative support is necessary for successful implementation of these safeguards. It is suggested, therefore, that the administration of both navigational and environmental protection, in maritime countries, cooperate in the revision of relevant federal laws, to implement the provisions of the MARPOL 73/78/97 convention; in this way, the air pollution from ships can be effectively controlled. Installation of advanced detection equipment can effectively detect any ships’ violations of air pollution regulations. The Harbor Affairs’ Bureau should also establish a database of air pollution inspections for ships berthed within their harbor, requiring that ships’ equipment comply with the requirements of the MARPOL convention, for the reduction of air pollution.     

Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

The tragedy of soft choices: capacity accumulation and lopsided allocation in the Norwegian coastal cod fishery

Following years of reduced cod stocks and the build up of capture capacity in the coastal fleet, the Norwegian government implemented “access closure” and “vessel quotas” at the end of the 1980s, in order to bring capture capacity under control. However, despite these rather powerful policy tools, the capacity of the Norwegian cod fishery continued to increase during the 1990s. This paper outlines the processes that led to this increase in capture capacity and to the accumulation of vessels in the large size segments of the coastal fleet, the exact opposite result of that intended by the introduction of the fisheries policy. We present two main factors to explain these trends: Firstly, the expansion in quota factors due to exchange or renewal of vessels. This provides vessel-owners with more “vessel-meters” which are equivalent to an increased share of total quota under the maximal quota regulations. This situation implies a redistribution of resources from smaller to larger vessels. Secondly, improved efficiency of technology aboard the vessels makes the vessels more efficient as capture machines. The effect of these changes remains hidden as long as the total stock increases, which was the situation from the introduction of the new regime and until the late 1990s. When the stock once again declined, the effect of the capacity build-up was exposed. A decade of soft choices, adjustments, and adaptations has used up the available solutions. New regulations and a new policy are now required.     

Behavioral response of Indo-Pacific humpback dolphin (Sousa chinensis) to vessel traffic

A series of land-based surveys were conducted at two vantage points of known dolphin abundance in Hong Kong. The purpose of this study was to determine the behavioral response of Indo-Pacific humpback dolphin (Sousa chinensis) to vessel traffic. Results indicated that dolphins dove for a longer duration in areas of heavy vessel traffic or when there was the presence of an oncoming vessel. Dependent upon the type of vessel and the relative distance, dolphins might flee, continue their ongoing activity, perform a new activity, or approach the vessel. Whilst slow-moving vessels appeared not to cause immediate stress on the dolphin community, fast-moving vessels often cause disruption of behavior and social life. In order to ensure a better environment for the animals, we suggest that proactive conservation measures such as the creation of a marine park, rules and regulations for dolphin watching activities, and regional control of vessel speed should be implemented.     

Cost-Benefit Assessment of Inspection and Repair Planning for Ship Structures Considering Corrosion Model Uncertainty

Owing to high costs and unnecessary inspections necessitated by the traditional inspection planning for ship structures, the risk-based inspection and repair planning should be investigated for the most cost-effective inspection. This paper aims to propose a cost-benefit assessment model of risk-based inspection and repair planning for ship structures subjected to corrosion deterioration. Then, the benefit-cost ratio is taken to be an index for the selection of the optimal inspection and repair strategy. The planning problem is formulated as an optimization problem where the benefit-cost ratio for the expected lifetime is maximized with a constraint on the minimum acceptalbe reliability index. To account for the effect of corrosion model uncertainty on the cost-benefit assessment, two corrosion models, namgly, Paik＇ s model and Guedes Soares＇ model, are adopted for analysis. A numerical example is presented to illustrate the proposed method. Sensitivity studies are also providet. The results indicate that the proposed method of risk-based cost-benefit analysis can effectively integrate the economy with reliability of the inspection and repair planning. A balance can be achieved between the risk cost and total expected inspection and repair costs with the proposed method, which is very. effective in selecting the optimal inspection and repair strategy. It is pointed out that the corrosion model uncertainty and parametric uncertaintg have a significant impact on the cost-benefit assessment of inspection and repair planning.     

An improved methodology to measure flag performance for the shipping industry

The subject of measuring the performance of registries has been a topic of policy discussions in recent years at the regional level due to the recasting of the European Union (EU) port state control (PSC) directive which introduces incentives for flags which perform better. Since the current method used in the EU region entails some shortcomings, it has therefore been the subject of substantial scrutiny. Furthermore, the International Maritime Organization (IMO) developed a set of performance indicators which however lacks the ability to measure compliance as set out in one of its strategic directions towards fostering global compliance. This article develops a methodology to measure flag state performance which can be applied on the regional or global level and to other areas of legislative interest (e.g. recognized organizations, Document of Compliance Companies). The proposed methodology overcomes some of the shortcomings of the present method and presents a more refined, less biased approach of measuring performance. To demonstrate its usefulness, it is applied to a sample of 207,821 observations for a 3-year time frame and compared to the current method.     

Adaptive fuzzy controller design for dynamic positioning system of vessels

This paper develops an adaptive fuzzy controller for the dynamic positioning (DP) system of vessels with unknown dynamic model parameters and unknown time-varying environmental disturbances. The controller is designed by combining the adaptive fuzzy system with the vectorial backstepping method. An adaptive fuzzy system is employed to approximate the uncertain term induced by unknown dynamic model parameters and unknown time-varying environmental disturbances. It is theoretically proved that the proposed adaptive fuzzy DP controller can make the vessel be maintained at the desired values of its position and heading with arbitrary accuracy, while guaranteeing the uniform ultimate boundedness of all signals in the closed-loop DP control system of vessels. Simulation studies with comparisons on a supply vessel are carried out, and the results illustrate the effectiveness of the proposed control scheme.     

On the use of the capability polar plots program for dynamic positioning systems for marine vessels

As the capability of polar plots becomes better understood, improved dynamic positioning (DP) systems are possible since the control algorithms greatly depend on the accuracy of the aerodynamic and hydrodynamic models. The measurements and estimation of the environmental disturbances have an important role in the optimal design and selection of a DP system for a marine vessel. The main objective of this work is to present a new software program capable of estimating the environmental forces, thrusters capability calculations, and capability polar plots for marine vessels. A flowchart illustrating the logic and data flow of a developed software program, the Capability Polar Plot Program (CPPP), and the estimated results for two case studies for a scientific drilling vessel and a survey vessel are presented. It is obvious from the obtained results that the developed program has a future potential for the estimation of the Capability Polar Plots for marine vessels. Moreover, the developed software program would be considered as a marine tool for the thrusters' selection and their configuration for marine vessels and floating production units for the Oil and Gas industries.