CFRP布约束增强高强混凝土柱抗震性能数值分析

采用地震工程开源模拟软件OpenSees（Open System for Earthquake Engineering Simulation）对CFRP（Carbon Fiber Reinforced Polymer,碳纤维增强复合材料）布加固高强钢筋混凝土方柱的抗震性能进行了数值分析。采用Steel02Material和Concrete02Material材料本构模型模拟了CFRP布加固高强混凝土方柱的抗震性能;在此基础上,进一步研究了轴压比和剪跨比这2个因素对试件抗震性能的影响。将所得数值分析结果与相同条件下的试验结果对比后发现：基于Steel02 Material和Concrete02 Material材料本构,利用OpenSees,可以较好地模拟CFRP布加固高强混凝土方柱的抗震性能,并且与试验结果（滞回曲线、骨架曲线、水平承载力和位移延性系数）能够较好地吻合,从而说明该数值分析方法还可以准确地反映出轴压比和剪跨比对高强混凝土柱抗震性能的影响规律。     

循环荷载下不锈钢力学性能建模方法

为研究不锈钢在循环荷载下的力学性能建模方法,基于OpenSees数值分析平台模拟国内外学者完成的奥氏体不锈钢和双相型不锈钢试件循环加载试验结果,以及配置奥氏体不锈钢的节段拼装桥墩拟静力试验结果。模拟结果与试验结果的对比表明：模拟得到的不锈钢循环加载下的应力-应变滞回曲线与试验结果吻合良好,数值模型可预测奥氏体不锈钢和双相型不锈钢在不同循环加载方式下的响应。不锈钢在单调加载与循环加载下的力学性能有较大区别,应分别建模和取值。配置奥氏体不锈钢的摇摆-自复位节段拼装桥墩滞回性能模拟结果与试验结果吻合较好,进一步验证了不锈钢力学性能建模方法的准确性。     

高层钢板剪力墙结构底部加强层抗震性能分析

采用非线性有限元软件Msc．Marc对高层钢管混凝土组合框架-钢板剪力墙结构底部四层两跨未加劲薄钢板墙模型进行了推覆分析与滞回分析。计算结果表明,组合钢板剪力墙结构具有良好的延性及稳定的滞回性能,结构进入弹塑性阶段后钢板墙的拉力带方向与CAN／CSA S16—01（2001）推荐公式吻合良好。根据分析结果,比较了不同分析类型及不同钢板墙厚度的影响。研究发现,考虑钢材强化及包辛格效应后,结构滞回分析的极限承载力将小于推覆分析的极限承载力;随着钢板墙厚度的增大,结构的弹塑性屈曲模态由局部屈曲向整体屈曲过渡;在罕遇地震作用下,钢板墙结构的底层边缘约束柱将产生较大的轴拉力,甚至被拉断而导致结构整体破坏。     

Development of steel dampers for bridges to allow large displacement through a vertical free mechanism

Isolation bearings and dampers are often installed between piers and superstructures to reduce the seismic responses of bridges under large earthquakes. This paper presents a novel steel damper for bridges. The damper employs steel plates as energy dissipation components, and adopts a vertical free mechanism to achieve a large deformation capacity. Quasi-static tests using displacement-controlled cyclic loading and numerical analyses using a finite element program called ABAQUS are conducted to investigate the behavior of the damper, and a design methodology is proposed based on the tests and numerical analyses. Major conclusions obtained from this study are as follows:(1) the new dampers have stable hysteresis behavior under large displacements;(2) finite element analyses are able to simulate the behavior of the damper with satisfactory accuracy; and(3) simplified design methodology of the damper is effective.     

基于OpenSees平台的钢管混凝土结构力学性能数值模拟

基于非线性纤维梁-柱单元理论,以OpenSees为求解平台分别进行了钢管混凝土结构滞回曲线计算和弹塑性动力时程分析等数值模拟,计算结果与试验吻合良好。钢管内核心混凝土采用考虑钢管约束效应的应力—应变关系,钢材采用随动强化本构模型。在传统纤维模型法的基础上,通过直接在截面层次定义非线性剪切恢复力的方法建立了考虑非线性剪切效应的剪力墙结构数值模型,结果表明该模型能较好地模拟组合剪力墙的抗剪承载力、捏缩效应以及刚度退化等力学性能。对输入不同地震波下钢管混凝土框架体系的动力时程分析表明,基于OpenSees求解平台的非线性纤维模型法能够较好地模拟钢管混凝土框架结构的非线性动力特性。     

圆钢管约束高强灌浆料局部承压性能研究

以圆钢管约束高强灌浆料局部承压性能试验为基础,基于ABAQUS有限元计算平台,通过建立分段模型(Multi-section Model简称MSM模型)进行数值模拟,探究圆钢管约束高强灌浆料在局部承压作用下的力学性能,并将软件计算得到的荷载-位移曲线与试验结果进行对比分析。结果表明,分段模型适用于圆钢管约束高强灌浆料局部承压作用下的数值模拟,且计算结果与试验结果吻合较好;增大试件高径比、钢管壁厚和高强灌浆料强度均可提高其极限承载力。     

基于OpenSees的防屈曲支撑加固钢筋混凝土框架数值模拟

提出了一种既有钢筋混凝土框架结构的抗震加固方法,该法采用防屈曲支撑提高框架结构体系的水平承载力和耗能能力,利用外包钢进一步提高柱子的抗弯和抗剪承载力。采用开源有限元程序OpenSees,分别建立空钢筋混凝土框架和防屈曲支撑加固钢筋混凝土框架的分析模型,对2榀钢筋混凝土框架的抗震性能进行模拟。防屈曲支撑采用了弹塑性桁架单元模型,加固框架柱混凝土考虑了外包钢的约束作用。将分析结果与拟静力试验结果进行比较,以检验分析模型的准确性,以及研究防屈曲支撑和外包钢对混凝土框架抗震性能的影响。分析结果表明,数值模拟与试验结果吻合较好,验证了基于OpenSees建立的数值模型的准确性;外包钢有效改善了框架柱的抗弯承载力和变形能力;防屈曲支撑显著提高了加固框架体系的水平刚度、水平承载力和耗能能力。     

Performance evaluation of retrofitting strategies for non-seismically designed RC buildings using steel braces

Recent major earthquakes around the world have evidenced that research in earthquake engineering must be directed to the vulnerability assessment of existing constructions lacking appropriate seismic resisting characteristics. Their retrofit or replacement should be made in order to reduce vulnerability, and consequent risk, to currently accepted levels. In this work, the efficiency of ductile steel eccentrically-braced systems in the seismic retrofitting of existing reinforced concrete (RC) buildings is studied. The retrofit technique studied consists in a bracing system with an energy dissipation device, designed to dissipate energy by shear deformation. The numerical model was calibrated with cyclic test results on a full-scale structure. The models used for the RC frame and masonry represent their real behavior and influence in the global structural response. The steel bracing system was modeled with strut rigid elements. The model for the energy dissipater device reproduces rigorously the behavior of the shear-link observed in the cyclic tests, namely in terms of shear, drift and energy dissipation. With the calibrated numerical model, a series of non-linear dynamic analyses were performed, for different earthquake input motions, intending to study: the influence of the retrofitting system in the response of bare and infilled structures; the influence of the location and strength of the retrofitting system.     

Conceptual study of X-braced frames with different steel grades using cyclic half-scale tests

In this paper,an experimental and analytical study of two half-scale steel X-braced frames with equal nominal shear strength under cyclic loading is described.In these tests,all members except the braces are similar.The braces are made of various steel grades to monitor the effects of seismic excitation.Internal stiffeners are employed to limit the local buckling and increase the fracture life of the steel bracing.A heavy central core is introduced at the intersection of the braces to decrease their effective length.Recent seismic specifications are considered in the design of the X-braced frame members to verify their efficiency.The failure modes of the X-braced frames are also illustrated.It is observed that the energy dissipation capacity,ultimate load capacity and ductility of the system increase considerably by using lower grade steel and proposed detailing.Analytical modeling of the specimens using nonlinear finite element software supports the experimental findings.     

反复荷载作用下矩形钢管混凝土树状节点的非线性分析

本文在确定了往复应力作用下钢管混凝土的钢材和核心混凝土的应力-应变关系的基础上,利用纤维杆元模型,有限元模型对钢管混凝土Y形柱和十字形钢梁连接的节点的荷载-位移滞回关系曲线及其骨架曲线进行了计算,并与试验结果进行了比较。结果表明：由纤维杆元模型与试验所得的低周反复荷载作用下的骨架曲线极为相似,但在峰值荷载后差异较大;由纤维杆元模型和有限元所得的在低周反复荷载作用下滞回曲线也与在反复荷载作用下试验所得的结果相一致。纤维杆元模型能准确地预测节点的弹塑性行为和整体抗震性能,可用于节点滞回性能的非线性参数分析研究。在此基础上研究了方钢管混凝土柱的轴压比,宽厚比及核心混凝土强度对节点受力性能的影响。     

高温下钢及组合钢节点有限元建模及基于构件的分析方法（英文）

欧洲规范EC3 Part 1-1第5章[1]允许工程师使用一些先进的有限元分析软件来分析和设计钢结构,如线弹性、刚塑性以及二阶弹塑性整体分析。这3种极不相同的分析方法,能够用于简支、半连续以及连续节点模型中[2]。节点模型根据刚度的不同,可分为铰接、半刚性和刚性模型;按照强度的不同,可分为铰接、部分强度和全强度模型。尽管大多数的工程问题仅仅要求进行线弹性分析,但仍有一些特殊结构可能要求采用高级分析以降低施工成本,例如底层无支撑钢框架结构。在这种结构中,采用半连续节点（具有半刚度和部分强度特性）进行框架分析,会显著增强结构抵抗名义水平荷载、风荷载、整体缺陷、地震作用时的抗侧刚度和强度,因此在控制的水平荷载下计算的横向侧移可能在EC3允许的范围内。在基于性能的抗火设计中,结构抗火工程师可能想利用钢节点潜在的刚度和强度,尤其是有端板节点的钢结构,这是一种最常见的钢结构施工形式。端板可以是部分深度的,或者是延伸端板,涵盖了名义铰接、半刚性和完全刚性节点模型。本文给出了端板节点高温性能研究的一系列数值分析结果;应用基于构件的方法,建立了这些节点在高温下的力学反应计算公式,以及梁腹板剪应力分量、连接处的拉应力和压应力区域的力学模型。基于构件的方法能够考虑钢节点的热约束效应。对已有钢端板节点试验进行了有限元模拟和基于构件的分析表明,2种方法的分析结果与试验结果的偏差都是可接受的,包括热约束效应。     

基于损伤塑性模型的砌体墙体非线性有限元分析

为了研究砌体墙体用钢结构加固后的力学性能,需要提供较准确的砌体墙体非线性计算,考虑到砌体与混凝土的材料性质具有相似性,将混凝土损伤塑性模型经修正后应用于砌体数值模拟,实现对砌体墙体的非线性有限元分析。通过与水平加载试验结果对比,验证了有限元模型的正确性。探讨了损伤塑性模型中的粘性系数、膨胀角、砌体本构关系中的初始弹性模量、受拉应力应变关系对计算结果的影响。结果表明：粘性系数和膨胀角对抗剪承载力、峰值位移及下降段性能均有较大影响,而对初始刚度影响很小;随着初始弹性模量的增大,砌体墙体抗剪承载力随之提高,但峰值位移无明显变化;受拉应力应变方程中待定系数的取值,对抗剪承载力及峰值位移影响较大。     

A new macromodel for the assessment of the seismic response of infilled RC frames

Numerous research studies have proved that numerical models aiming at an accurate evaluation of the seismic response of RC framed buildings cannot ignore the inelastic behaviour of infills and the interaction between infill and frame elements. To limit the high computational burden of refined non-linear finite element models, in the latest decades, many researchers have developed simplified infill models by means of single or multiple strut-elements. These models are low time-consuming and thus adequate for static and dynamic analyses of multi-storey structures. However, their simulation of the seismic response is sometimes unsatisfying, particularly in the presence of infill walls with regular or (particularly) irregular distributions of openings. This paper presents a new 2D plane macro-element, which provides a refined simulation of the non-linear cyclic response of infilled framed structures at the expense of a limited computational cost. The macro-element consists of an articulated quadrilateral panel, a single 1D diagonal link, and eight 2D links and is able to model the shear and flexural behaviour of the infill and the non-linear flexural/sliding interaction between infill and surrounding frame. The proposed macro-element has been implemented into the open source software OpenSees and used to simulate the response of single-storey, single-span RC infilled frame prototypes tested by other authors. The above prototypes are selected as made of different masonry units and characterised by full or open geometric configuration.     

Dynamic performance of angle-steel concrete columns under low cyclic loading-Ⅱ: parametric study

Tests of nine angle-steel concrete column (ASCC) specimens under low cyclic loading are described in acompanion paper (Zheng and Ji, 2008). In this paper, the skeleton curves from the numerical simulation are presented, andshow good agreement with the test results. Furthermore, parametric studies are conducted to explore the influence of factorssuch as the axial compression ratio, shear steel plate ratio, steel ratio, prismatic concrete compression strength, yield strengthof angle steel and shear span ratio, etc., on the monotonic load-displacement curves of the ASCCs. Based on a statisticalanalysis of the calculated results, hysteretic models for load-displacement and moment-curvature are proposed, which agreewell with the test results. Finally, some suggestions concerning the conformation of ASCCs are proposed, which could beuseful in engineering practice.     

Test on full‐scale three‐storey steel moment frame and assessment of ability of numerical simulation to trace cyclic inelastic behaviour

A test on a full‐scale model of a three‐storey steel moment frame was conducted, with the objectives of acquiring real information about the damage and serious strength deterioration of a steel moment frame under cyclic loading, studying the interaction between the structural frame and non‐structural elements, and examining the capacity of numerical analyses commonly used in seismic design to trace the real cyclic behaviour. The outline of the test structure and test program is presented, results on the overall behaviour are given, and correlation between the experimental results and the results of pre‐test and post‐test numerical analyses is discussed. Pushover analyses conducted prior to the test predicted the elastic stiffness and yield strength very reasonably. With proper adjustment of strain hardening after yielding and composite action, numerical analyses were able to accurately duplicate the cyclic behaviour of the test structure up to a drift angle of 1/25. The analyses could not trace the cyclic behaviour involving larger drifts in which serious strength deterioration occurred due to fracture of beams and anchor bolts and progress of column local buckling. Copyright © 2005 John Wiley & Sons, Ltd.     

Finite element analysis of an all-steel buckling-restrained brace

Typical all-steel buckling-restrained braces(BRBs) usually exhibit obvious local buckling, which is attributed to the lack of longitudinal restraint to the rectangle core plate. To address this issue, all-steel BRBs are proposed, in which two T-shaped steel plates are adopted as the minor restraint elements to restrain the core plate instead of infilled concrete or mortar. In order to investigate the factors that characterize the hysterical responses of this device, different finite element(FE)m...     

利用有限元方法模拟力学拉伸试验以钢纤维混凝土为例

力学试验是获取岩石等许多工程材料力学性能的主要方法之一。 但是对某些特殊材料, 由于影响其力学性能的因素众多, 单纯通过试验来获取其力学性能, 成本高, 过程复杂。 如工程抗震中目前普遍使用的钢纤维混凝土(SFRC), 很难单纯通过力学试验来获取钢纤维的分布对其力学性能的影响。 本文基于随机方法对钢纤维混凝土建立有限元模型, 利用数值模拟的方法来估计钢纤维的分布和体积率对钢纤维混凝土拉伸性能的影响。 通过与试验结果比较验证了其可行性, 结果表明钢纤维的分布对钢纤维混凝土屈服前的力学性能影响较小, 对屈服后的应力-应变特征影响较大。 当钢纤维体积率从1%变化到2%, 钢纤维混凝土的屈服强度与体积率大致为线性关系, 强度随之增加。     

Seismic ground response at Lotung: Hysteretic elasto-plastic-based 3D analyses

This paper presents a non-linear finite element study to back-interpret the free field seismic response recorded at the Lotung Large-Scale Seismic Test site. The study is carried out in the time domain by the Finite Element (FE) code PLAXIS 3D, considering the vertical wave propagation of both the horizontal components of motion. The non-linear soil behaviour is simulated through a constitutive model, the Hardening Soil model with Small-Strain Stiffness (HSsmall), capable of describing the cyclic response of the material at different strain levels. In the paper, the constitutive response of the HSsmall model is firstly investigated through numerical simulations of strain-controlled cyclic shear tests under single and multi-directional conditions at low strain levels. Then, it is adopted to back-analyse the recorded free field seismic response, comparing the FE numerical results to the in-situ down-hole and surface signals recorded during two earthquakes occurred on May 20th and July 17th 1986, characterized by different peak ground accelerations.     

低屈服点钢研究进展与力学性能数据分析

为对低屈服点钢进行进一步的研究,同时促进其在工程中的应用,全面综述了国内外学者对低屈服点钢材料的研究成果,主要包括单调拉伸性能、循环加载性能以及低屈服点钢材料的应用.并将文献中的力学性能参数进行统计,采用K-S检验法对屈服强度与抗拉强度进行检验.结果表明:低屈服点钢具有良好的延性与滞回性能,力学性能参数基本满足规范要求...     

Seismic vulnerability evaluation of axially loaded steel built-up laced members Ⅰ: experimental results

An experimental program was initiated to investigate the seismic performance of built-up laced steel bracemembers. Quasi-static testing of twelve typical steel built-up laced member (BLM) specimens was conducted. These weredesigned to span a range of parameters typically encountered for such members based on findings from a survey of commonlyused shapes and details that have been historically used. The specimens were subdivided into groups of three different cross-sectional shapes, namely built-up Ⅰ-shape section, and built-up box shapes buckling about the x or the y axis. Within eachgroup, global and local buckling slenderness ratios had either kl/r values of 60 or 120, and b/t ratios of 8 or 16. The specificinelastic cyclic behavior germane to each specimen, and general observations on overall member hysteretic behavior as afunction of the considered parameters, are reported. A companion paper (Lee and Bruneau 2008) investigates this observedresponse against predictions from analytical models, and behavior in the perspective of system performance.