非比例阻尼线性体系地震反应计算的振型分解反应谱法

以非比例阻尼线性体系地震反应计算实数形式的一般解答为基础,推导得到了非比例阻尼线性体系水平地震作用计算的多种形式,建立了非比例阻尼线性体系地震反应计算振型分解反应谱法的基本过程与步骤。最后,以一个五层剪切型结构为例,通过与各种常用直接积分方法计算结果的比较,证实了本文非比例阻尼线性体系地震反应计算实数形式的一般解答的高精度与可靠性。通过对多种形式地震作用所得地震效应的比较,证实了非比例阻尼线性体系地震反应振型分解反应谱方法的可靠性及可行性。     

Simplifications of CQC method and CCQC method

The response-spectrum mode superposition method is widely used for seismic response analyses of linear systems. In using this method, the complete quadratic combination （CQC） is adopted for classically damped linear systems and the complex complete quadratic combination （CCQC） formula is adopted for non-classically damped linear systems. However, in both cases, the calculation of seismic response analyses is very time consuming. In this paper, the variation of the modal correlation coefficients of displacement, velocity and displacement-velocity with frequency and damping ratios of two modes of interest are studied, Moreover, the calculation errors generated by using CQC and square-root-of-the-sum-of-thesquares （SRSS） methods （or CCQC and CSRSS methods） for different damping combinations are compared. In these analyses, some boundary lines for classically and non-classically damped systems are plotted to distinguish the allowed minimum frequency ratio at given geometric mean of the damping ratios of both modes if their relativity is neglected. Furthermore, the simplified method, which is a special mode quadratic combination method considering only relativity of adjacent modes in CQC method and named simplified CQC or partial quadratic combination （PQC） method for classically damped linear system, is proposed to improve computational efficiency, and the criterion for determination of how many correlated modes should be adopted is proposed. Similarly, the simplified CCQC or complex partial quadratic combination （CPQC） method for the non-classically damped linear system and the corresponding criterion are also deduced. Finally, a numerical example is given to illustrate the applicability, computational accuracy and efficiency of the PQC and CPQC methods.     

On precise time integration method for non-classically damped MDOF systems

In the complex mode superposition method, the equations of motion for non-classically damped multiple-degree-of-freedom （MDOF） discrete systems can be transferred into a combination of some generalized SDOF complex oscillators. Based on the state space theory, a precise recurrence relationship for these complex oscillators is set up; then a delicate general solution of non-classically damped MDOF systems, completely in real value form, is presented in this paper. In the proposed method, no calculation of the matrix exponential function is needed and the algorithm is unconditionally stable. A numerical example is given to demonstrate the validity and efficiency of the proposed method.     

An improved response spectrum method for calculating seismic design response. Part 2: Non-classically damped structures

A response spectrum method which combines the analytical advantage of the mode acceleration formulation and the practical advantage of the mode displacement formulation is developed for seismic response calculation of non-classically damped structures. It reduces the error associated with the truncation of the high frequency modes without explicitly using them in the analysis. The method is especially effective for calculating the response of stiff structural systems and also for calculating the response quantities which are strongly affected by high frequency modes. Even with flexible structures, it is shown to provide more accurate response results than the results obtained with the mode displacement approach.     

Dynamic characteristics of a novel damped outrigger system

This paper presents exact analytical solutions for a novel damped outrigger system, in which viscous dampers are vertically installed between perimeter columns and the core of a high-rise building. An improved analytical model is developed by modeling the effect of the damped outrigger as a general rotational spring acting on a Bernoulli-Euler beam. The equivalent rotational spring stiffness incorporating the combined effects of dampers and axial stiffness of perimeter columns is derived. The dynamic stiffness method(DSM) is applied to formulate the governing equation of the damped outrigger system. The accuracy and effi ciency are verifi ed in comparison with those obtained from compatibility equations and boundary equations. Parametric analysis of three non-dimensional factors is conducted to evaluate the infl uences of various factors, such as the stiffness ratio of the core to the beam, position of the damped outrigger, and the installed damping coeffi cient. Results show that the modal damping ratio is signifi cantly infl uenced by the stiffness ratio of the core to the column, and is more sensitive to damping than the position of the damped outrigger. The proposed analytical model in combination with DSM can be extended to the study of structures with more outriggers.     

CQC and SRSS methods for non-classically damped structures

Two mode combination methods are presented for structures with non-classical (non-proportional) damping. They are of the same level of complexity as the well-known SRSS and CQC methods. They require only a single, real-valued participation factor for each mode, a single correlation coefficient, and standard relative displacement response spectra. A base-isolation study shows that the standard SRSS and CQC methods for classically damped structures give under-conservative response predictions, and that the proposed methods give accurate predictions.     

On the response of yielding seismically isolated structures

This paper investigates the seismic response of yielding isolated structures. To establish a general understanding of the nonlinear response of seismically isolated structures, this study first investigates the nonlinear response of isolated structures subjected to steady‐state harmonic motion and nonlinear transient ground excitation. The response of both viscously damped and hysteretically damped isolation systems is investigated in three phases. Initially, basic insights are gained through simple nonlinear two degrees of freedom (2‐DOF) models subjected to harmonic motion of varying frequencies. Next, the transient response analysis of the nonlinear 2‐DOF model is investigated for a wide range of isolation system and superstructure properties. The results obtained from both approaches indicate that the yielding behavior of a structure on an isolation system is significantly different from that of the comparable fixed‐base structure. Finally, the response of the nonlinear 2‐DOF system model is compared with that of a 15‐story, three‐dimensional model. Based on the results of these analytical investigations, some important considerations for the design of seismically isolated structures are presented. Copyright © 2007 John Wiley & Sons, Ltd.     

Damped vibration mode superposition method for dynamic response analysis

In the dynamic response analysis of extremely complex structural systems in which the damping characteristics of each element are independent, the damping matrix is not always diagonalized by the use of undamped free vibration mode shapes. In the present paper, a mode-superposition method by the use of damped free vibration mode shapes is developed for such structural systems. It is also shown that the Fast Fourier Transform (FFT) procedures, that are available for the dynamic response analysis of linear structural systems, are used effectively in this mode-superposition method with good accuracy.     

Optimal integrated seismic design of structural and viscoelastic bracing‐damper systems

Passive structural control techniques are generally used as seismic rehabilitation and retrofit methodologies for existing structures. A poorly explored and exciting opportunity within structural seismic control research is represented by the possibility to design new structural forms and configurations, such as slender buildings, without compromising the structural performance through an integrated design approach. In this paper, with reference to viscous dampers, an integrated seismic design procedure of the elastic stiffness resources and viscoelastic properties of a dissipative bracing‐damper system is proposed and developed to ensure a seismic design performance, within the displacement‐based seismic design, explicitly taking into account the dynamic behaviour both of the structural and control systems. The optimal integrated seismic design is defined as the combination of the variables that minimizes a suitable index, representing an optimized objective function. Numerical examples of the proposed integrated cost‐effectiveness seismic design approach both on an equivalent SDOF system and a proportionally damped MDOF integrated system are developed defining the design variables, which minimize the cost index. Validation of the effectiveness of the proposed integrated design procedure is carried out by evaluating the average displacement of the time‐history responses to seven unscaled acceleration records selected according to EC8 provisions. Copyright © 2014 John Wiley & Sons, Ltd.     

Complex complete quadratic combination method for damped system with repeated eigenvalues

A new response-spectrum mode superposition method, entirely in real value form, is developed to analyze the maximum structural response under earthquake ground motion for generally damped linear systems with repeated eigenvalues and defective eigenvectors. This algorithm has clear physical concepts and is similar to the complex complete quadratic combination (CCQC) method previously established. Since it can consider the effect of repeated eigenvalues, it is called the CCQC-R method, in which the correlation coefficients of high-order modal responses are enclosed in addition to the correlation coefficients in the normal CCQC method. As a result, the formulas for calculating the correlation coefficients of high-order modal responses are deduced in this study, including displacement, velocity and velocity-displacement correlation coefficients. Furthermore, the relationship between high-order displacement and velocity covariance is derived to make the CCQC-R algorithm only relevant to the high-order displacement response spectrum. Finally, a practical step-by-step integration procedure for calculating high-order displacement response spectrum is obtained by changing the earthquake ground motion input, which is evaluated by comparing it to the theory solution under the sine-wave input. The method derived here is suitable for generally linear systems with classical or non-classical damping.     

A subspace modal superposition method for non-classically damped systems

For structures with non-proportional damping, complex eigenvectors or mode shapes must be used in order to decoe the equations of motion. The resulting equations can then be solved in a systematic way. The necessity of solvie complex eigenvalue problem of a large system remains an obstacle for the practical application of the method. This stres utilizes the fact that in practice only a small number of the complex modes are needed. Therefore, these complex modes be approximated by a linear combination of a small number of the undamped modes, which can be obtained by established methods with less cost. An additional eigenvalue problem is then solved in a subspace with a much sm dimension to provide the best combination coefficient for each complex mode. The method of solution for the decoue equations is then carried over, using the approximate complex modes expressed in undamped mode shapes, to resue simple formulas for the time- and frequency-domain solution. Thus, an efficient modal superposition method is develoe for non-proportionally damped systems. The accuracy of this approximate method is studied through an example. Comparing the frequency response result using the approximate method with that using the exact complex modes, found that the error is negligible.     

Comparative performance of friction damped systems and base isolation systems for earthquake retrofit and aseismic design

The seismic performance of a steel framed structure equipped with (i) friction damping devices and (ii) base isolators is compared. A parametric study based on energy concepts is performed first using time-history dynamic analysis to determine the optimum properties of the two systems when excited by an earthquake whose energy is distributed over a relatively broad frequency band (1940 El Centro, N-S). Using these same properties, the responses of the two structural systems are then examined when excited by earthquakes whose power content essentially is concentrated at the low frequency end of the energy spectrum (1977 Romania, Bucharest, N-S and 1985 Mexico, SCT E-W). The results of the study show that, while both systems similarly reduce the response of conventional structures to the California earthquake, the friction damped structure exhibits a superior performance under the low frequency earthquakes. Very large shear forces and displacements are observed when the Romania and Mexico earthquakes are applied to the base isolated structure, indicating that the performance of a base isolated structure depends on the characteristics of the site earthquake. By comparison, friction damped structures are shown to behave favourably under the three earthquakes studied; this suggests that friction damping devices offer a more consistent way of protecting structures during earthquakes.     

Response spectrum analysis for non-classically damped linear system with multiple-support excitations

A new response spectrum method, which is named complex multiple-support response spectrum (CMSRS) method in this article, is developed for seismic analysis of non-classically damped linear system subjected to spatially varying multiple-supported ground motion. The CMSRS method is based on fundamental principles of random vibration theory and properly accounts for the effect of correlation between the support motions as well as between the modal displacement and velocity responses of structure, and provides an reasonable and acceptable estimate of the peak response in term of peak seismic ground motions and response spectra at the support points and the coherency function. Meanwhile, three new cross-correlation coefficients or cross covariance especially for the non-classically damped linear structures with multiple-supports excitations are derived under the same assumptions of the MSRS method of classically damped system. The CMSRS method is examined and compared to the results of time history analyses in two numerical examples of non-classically damped structures in consideration of the coherences of spatially variable ground motion. The results show that for non-classically damped structure, the cross terms representing the cross covariance between the pseudo-static and dynamic component are also quite small just as same as classically damped system. In addition, it is found that the usual way of neglecting all the off-diagonal elements in transformed damping matrix in modal coordinates in order to make the concerned non-classically damped structure to become remaining proportional damping property will bring some errors in the case of subjected to spatially excited inhomogeneous ground motion.     

Cross-correlation coefficients and modal combination rules for non-classically damped systems

In stochastic analysis the knowledge of cross-correlation coefficients is required in order to combine the response of the modal Single-Degree-Of-Freedom (SDOF) oscillators for obtaining the nodal response. Moreover these coefficients play a fundamental role in the seismic analysis of structures when the response spectrum method is used. In fact they are used in some modal combination rules in order to obtain the maximum response quantities starting from the modal maxima. Herein a method for the evaluation of the cross-correlation coefficients for non-classically damped systems is presented. It is defined in the time domain instead of the frequency domain as usually encountered in the literature. Although non-classically damped structures possess complex eigenproperties, the great advantage in using this approach lies in the fact that the evaluation of these coefficients does not require complex quantities. Moreover a further particularization of the presented method allows a simple application of the spectrum analysis requiring only one response spectrum for an assigned damping ratio. Copyright © 1999 John Wiley & Sons, Ltd.     

A modal procedure for seismic analysis of non-linear base-isolated multistorey structures

A modal procedure for non-linear analysis of multistorey structures with high-damping base-isolation systems was proposed. Two different isolation devices were considered in the analysis: an high-damping laminated rubber bearing and a lead-rubber bearing. Starting from deformational properties verified by tests, the isolation systems were characterized using three different analytical models (an Elastic Viscous, a Bilinear Hysteretic and a Wen's Model) with parameters depending from maximum lateral strain. After non-linear modelling of isolation and lateral-force-resisting systems, the effects of material non-linearities were considered as pseudo-forces applied to the equivalent linear system (Pseudo-Force Method) and the formally linearized equations of motion were uncoupled by the transformation defined by the complex mode shapes. The modal responses were finally obtained with an extension of Nigam–Jennings technique to non-linear and non-classically damped systems, in conjunction with an iterative technique searching for non-linear contributions satisfying equations of motion and constitutive laws. Since the properties of the isolated structure usually change with maximun lateral strain of isolation bearings, the integration of a new set of governing equations was required for each design-displacement value. The procedure proposed was described in detail and then applied for the determination of modal and total seismic responses in some real cases. At first, a very good agreement between non-linear responses obtained with the proposed mode superposition and with a direct integration method was observed. Then a comparison of results obtained with the three different analytical models of the isolation bearings was carried out. At last, the exact modal response obtained with analytical models depending from the design displacement of the isolation bearings was compared with two different approximated solutions, evaluated using mode shapes and isolation properties, respectively, calculated under simplified hypothesis.© 1998 John Wiley & Sons, Ltd.     

Damping characteristics of friction damped braced frame and its effectiveness in the mega-sub controlled structure system

Based on energy dissipation and structural control principle, a new structural configuration, called the mega- sub controlled structure (MSCS) with friction damped braces (FDBs), is first presented. Meanwhile, to calculate the damping coefficient in the slipping state a new analytical method is proposed. The damping characteristics of one-storey friction damped braced frame (FDBF) are investigated, and the influence of the structural parameters on the energy dissipation and the practical engineering design are discussed. The nonlinear dynamic equations and the analytical model of the MSCS with FDBs are established. Three building structures with different structural configurations, which were designed with reference to the conventional mega-sub structures such as used in Tokyo City Hall, are comparatively investigated. The results illustrate that the structure presented in the paper has excellent dynamic properties and satisfactory control effectiveness.     

Modal time history analysis of non-classically damped structures for seismic motions

The step-by-step modal time history integration methods are developed for dynamic analysis of non-classically damped linear structures subjected to earthquake-induced ground motions. Both the mode displacement and mode acceleration-based algorithms are presented for the calculation of member and acceleration responses. The complex-valued eigenvectors are used to effect the modal decoupling of the equations of motion. However, the recursive step-by-step algorithms are still in terms of real quantities. The numerical results for the acceleration response and floor response spectra, obtained with these approaches, are presented. The mode acceleration approach is observed to be decidedly better than the mode displacement approach in as much as it alleviates the so-called missing mass effect, caused by the truncation of modes, very effectively. The utilization of the mode acceleration-based algorithms is, thus, recommended in all dynamic analyses for earthquake-induced ground motions.     

Efficient analysis of dynamic response of linear systems

After reviewing briefly a recently proposed procedure for evaluating the dynamic transient response of a classically damped linear system from its corresponding steady-state response, a modified procedure is presented which also appears to be highly efficient for non-classically damped systems of the type encountered in studies of soil-structure interaction. The concepts involved are developed by reference to viscously damped single-degree-of-freedom systems, and numerical solutions are included to illustrate the accuracy and efficiency of the proposed procedure and its superiority over the classical Discrete Fourier Transform approach.     

Optimal damping between two adjacent elastic structures

The optimal values for the distribution of passive dampers interconnecting two adjacent structures of different heights are determined. The dampers are selected to minimize the seismic response in the first and second modes of the taller of the two structures. For simplicity, the structures are represented as uniform damped shear beams subjected to a common ground motion. Under certain conditions, apparent damping ratios as high as 12 and 15 per cent can be achieved in the first and second modes of lightly damped structures by the introduction of interconnection dampers. The largest reduction of the response in the first mode is achieved when the taller structure is about twice the height of the second structure. © 1998 John Wiley & Sons, Ltd.     

Earthquake response analysis considering non-proportional damping

Non-proportional damping may be defined as a form of linear viscous damping which introduces coupling between the undamped modal co-ordinate equations of motion. The standard mode superposition method of earthquake response analysis therefore cannot be employed with non-proportionally damped structures. In this paper, several methods for analysing the dynamic response of non-proportional damped structures are outlined. It is concluded that the most efficient procedure is to express the response in terms of a truncated set of undamped modal coordinates and to integrate directly the resulting coupled equations. The effectiveness of the method is demonstrated by a numerical example.