共查询到20条相似文献,搜索用时 509 毫秒
1.
2.
Results from an investigation aimed at assessing seismic behavior of transfer story connections for high‐rise building consisting of steel‐reinforced concrete (SRC) frame and reinforced concrete (RC) core tube are presented. Two types of transfer story connections were experimentally evaluated for adequate strength, ductility and energy dissipation. For each type of connection, two large‐scale subassembly tests were carried out under monotonic and cyclic lateral displacement, respectively. Detailed observations and behavior responses were obtained to contrast the differences between monotonic and cyclic performance of the connections. Test results showed that the SRC column failed before connection collapse and that loading types have little effect on the strength but greatly affect the failure modes and the ductility of the connections. All specimens exhibited good properties for earthquake resistance since they all kept a stable inelastic behavior up to the interstory drift demand suggested by the AISC Seismic Provisions. Based on test observations, support stiffeners with appropriate width‐to‐thickness ratio and mechanical connectors connecting bars with the steel plate are recommended for design purposes in order to achieve more ductile and reliable seismic behavior of transfer story connections. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
3.
为探究局部锈蚀矩形截面钢筋混凝土(RC)桥墩重度震损加固后的抗震性能,本文对拟静力破坏后的6个矩形截面RC桥墩试件进行扩大截面加固。通过加载试验,对加固桥墩试件从破坏形态、滞回特性、水平承载力、位移延性、侧向刚度以及耗能等方面进行了系统分析。结果表明:相比于普通箍筋,横向施加预应力的改进扩大截面加固方式对破坏后桥墩试件的抗震性能修复成效更佳;在同等位移幅值下,锈蚀率不断增大,桥墩试件抗震性能呈现逐渐降低的趋势;钢筋锈蚀位置上移,加固后桥墩试件的抗震性能提升;轴压比加大,加固后桥墩试件承载力和侧向刚度增大,但延性降低。 相似文献
4.
5.
A safety format is proposed for the flexural design of reinforced concrete members for the combination of seismic and gravity loads, with load and resistance factors which depend on member type, on the value of the target theoretical probability of failure and on the ratio of the load effect due to gravity loads to that due to the nominal value of the seismic action, both obtained by elastic analysis. Safety factors are computed through an advanced Level II reliability procedure, using a limit state inequality between the member rotation ductility supply under monotonic loading and the peak rotation ductility and cyclic energy dissipation demands. Uncertainties considered are: for resistance, the uncertainty of failure under imposed cyclic deformations, and for action, the maximum peak ductility and energy dissipation demands in the structure's lifetime, as obtained through a series of non-linear dynamic analyses of multistorey buildings in 3D. using as input ensembles of bidirectional acceleration time-histories which describe probabilistically the extreme bidirectional seismic action in the structure's lifetime. Computed load and resistance factors are practically independent of the load-effects ratio. The load factor on the seismic action is found to be independent of member type and to increase with the theoretical probability of failure much faster than the elastic spectral value at the structure's fundamental period with probability of exceedance in the structure's lifetime. Simple rules for the dependence of the resistance modification factors on the theoretical failure probability are also derived. As for the computed values of the load factors the moment due to gravity loads is negligible in comparison to the factored seismic moment, a simplified safety checking inequality between the design flexural capacity and a reduced seismic moment is proposed, in which the ratio of the resistance to the load factor plays the role of a force reduction or effective behaviour factor for the member. 相似文献
6.
Given the importance that traditional force-based seismic design still currently exhibits, studies addressing issues related
to the definition of the behaviour factor values are considered to be of most interest. A probabilistic methodology is proposed
for the calibration of the q-factor relating its value with two fundamental parameters, the displacement ductility capacity
measured at a relevant location of the structure and the failure probability P
f
. The general foundation of this procedure is based on the probabilistic quantification of the seismic action and, by applying
a transformation procedure, of the structural seismic demand in terms of displacement ductility. By recalling well established
structural reliability procedures and by making use of nonlinear analysis methods, both static and dynamic, a general probabilistic
framework, which is able to relate the ductility capacity, the failure probability P
f
and the behaviour factor, is defined. In order to illustrate some of the potentialities of the methodology, an application
example is presented, addressing the q-factor assessment for a set of regular and irregular reinforced concrete frame structures,
enforcing a given P
f
and two different ductility levels. 相似文献
7.
钢筋混凝土框架结构造价与失效概率之间的近似关系研究 总被引:6,自引:1,他引:5
本文以层间位移角作为结构性能参数,分析了钢筋混凝土框架结构层间变形能力,以及在水平地震作用下层间位移反应。考虑钢筋混凝土框架结构材料强度和几何尺寸以及地震作用的不确定性,得出了在设计基准期内结构的失效概率。同时分析了不同设计参数下结构的最小造价,在此基础上,确定了结构最小造价和失效概率之间的近似关系。目的是为采用“投资—效益“准则确定该类型结构目标性能水平提供分析依据,从而为采用基于性能抗震设计理念制定建筑结构抗震设计规范提供基础研究。本文中,结构失效概率指结构最终极限状态的失效概率。 相似文献
8.
To investigate the seismic performance of hollow reinforced concrete(RC) bridge columns of rectangular cross section under constant axial load and cyclically biaxial bending,five specimens were tested.A parametric study is carried out for different axial load ratios,longitudinal reinforcement ratios and lateral reinforcement ratios.The experimental results showed that all tested specimens failed in the flexural failure mode and their ultimate performance was dominated by flexural capacity,which is represented by the rupture/buckling of tensile longitudinal rebars at the bottom of the bridge columns.Biaxial force and displacement hysteresis loops showed significant stiffness and strength degradations,and the pinching effect and coupling interaction effect of both directions severely decrease the structural seismic resistance.However,the measured ductility coefficient varying from 3.5 to 5.7 and the equivalent viscous damping ratio varying from 0.19 and 0.26 can meet the requirements of the seismic design.The hollow RC rectangular bridge columns with configurations of lateral reinforcement in this study have excellent performance under bidirectional earthquake excitations,and may be considered as a substitute for current hollow RC rectangular section configurations described in the Guideline for Seismic Design of Highway Bridges(JTG/T B02-01-2008).The length of the plastic hinge region was found to approach one sixth of the hollow RC rectangular bridge column height for all specimen columns,and it was much less than those specified in the current JTG/T.Thus,the length of the plastic hinge region is more concentrated for RC rectangular hollow bridge columns. 相似文献
9.
Steel caging technique is commonly used for the seismic strengthening of reinforced concrete (RC) columns of rectangular cross‐section. The steel cage consists of angle sections placed at corners and held together by battens at intervals along the height. In the present study, a rational design method is developed to proportion the steel cage considering its confinement effect on the column concrete. An experimental study was carried out to verify the effectiveness of the proposed design method and detailing of steel cage battens within potential plastic hinge regions. One ordinary RC column and two strengthened columns were investigated experimentally under constant axial compressive load and gradually increasing reversed cyclic lateral displacements. Both strengthened columns showed excellent behavior in terms of flexural strength, lateral stiffness, energy dissipation and ductility due to the external confinement of the column concrete. The proposed model for confinement effect due to steel cage reasonably predicted moment capacities of the strengthened sections, which matched with the observed experimental values. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
10.
Seismic performance of steel reinforced ultra high-strength concrete composite frame joints 总被引:1,自引:1,他引:0
To investigate the seismic performance of a composite frame comprised of steel reinforced ultra high-strength concrete (SRUHSC)
columns and steel reinforced concrete (SRC) beams, six interior frame joint specimens were designed and tested under low cyclically
lateral load. The effects of the axial load ratio and volumetric stirrup ratio were studied on the characteristics of the
frame joint performance including crack pattern, failure mode, ductility, energy dissipation capacity, strength degradation
and rigidity degradation. It was found that all joint specimens behaved in a ductile manner with flexural-shear failure in
the joint core region while plastic hinges appeared at the beam ends. The ductility and energy absorption capacity of joints
increased as the axial load ratio decreased and the volumetric stirrup ratio increased. The displacement ductility coefficient
and equivalent damping coefficient of the joints fell between the corresponding coefficients of the steel reinforced concrete
(SRC) frame joint and RC frame joint. The axial load ratio and volumetric stirrup ratio have less influence on the strength
degradation and more influence on the stiffness degradation. The stiffness of the joint degrades more significantly for a
low volumetric stirrup ratio and high axial load ratio. The characteristics obtained from the SRUHSC composite frame joint
specimens with better seismic performance may be a useful reference in future engineering applications. 相似文献
11.
避难建筑通常采用置换混凝土方法抗震,建筑对高强度地震的抗震性能差。因此提出高强度地震下带钢避难建筑抗震设计方法,采用复杂网络带钢避难建筑加固模型对加固前建筑的混泥土强度与荷载能力进行计算,增大框架柱截面,提升带钢避难建筑荷载。采用复合墙体受力加固模型提升建筑墙体抗震性。对加固后建筑模型的坍塌风险评估时,采用带钢避难建筑坍塌的全概率衡量加固后建筑在设计使用年限内的抗坍塌安全性。设计使用年限内加固后的带钢避难建筑的强震CRC超出概率是P(IMCRC),确保其在高强度地震下具有较高的抗震性能。实验结果说明,所提方法下的带钢避难建筑在遇到强震情况时具有较高的抗震性能。 相似文献
12.
Yield frequency spectra (YFS) are introduced to enable the direct design of a structure subject to a set of seismic performance objectives. YFS offer a unique view of the entire solution space for structural performance. This is portrayed in terms of the mean annual frequency (MAF) of exceeding arbitrary ductility (or displacement) thresholds, versus the base shear strength of a structural system having specified yield displacement and capacity curve shape. YFS can be computed nearly instantaneously using publicly available software or closed‐form solutions, for any system whose response can be satisfactorily approximated by an equivalent nonlinear single‐degree‐of‐freedom oscillator. Because the yield displacement typically is a more stable parameter for performance‐based seismic design compared with the period, the YFS format is especially useful for design. Performance objectives stated in terms of the MAF of exceeding specified ductility (or displacement) thresholds are used to determine the lateral strength that governs the design of the structure. Both aleatory and epistemic uncertainties are considered, the latter at user‐selected confidence levels that can inject the desired conservatism in protecting against different failure modes. Near‐optimal values of design parameters can be determined in many cases in a single step. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
13.
14.
基于位移设计的钢筋混凝土桥墩抗震性能试验研究(Ⅱ):振动台试验 总被引:1,自引:1,他引:0
通过模型振动台试验研究了基于位移设计的钢筋混凝土桥墩的抗震性能。以完成的拟静力试验中的桥墩试件为参考原型,利用基于位移抗震设计方法和现行桥梁抗震规范方法设计了4根1:2的钢筋混凝土桥墩试件并进行了模型振动台试验。对小震、中震和大震作用下桥墩试件的破坏形态、加速度和位移反应、位移延性系数和地震总输入能(耗能)等方面进行了比较分析。综合拟静力试验和振动台试验结果,可以认为基于位移设计的钢筋混凝土桥墩能够达到预期的延性抗震要求。 相似文献
15.
16.
17.
剪切型结构的抗震强度折减系数研究 总被引:1,自引:0,他引:1
为了研究剪切型结构抗震强度需求的变化规律,本文基于单自由度体系的非线性时程分析,研究了不同场地条件下延性折减系数与位移延性系数和结构自振周期的关系;采用修正等效单自由度体系位移延性折减系数的方法,研究了剪切型多自由度体系的延性折减系数;以基于中国建筑抗震规范设计的代表不同抗震能力要求的RC框架结构为分析对象,通过静力弹塑性分析,研究了RC框架结构的体系超强能力。分析结果表明场地类别、位移延性水准和结构振动周期对单自由度体系的延性折减系数有显著的影响;多自由度体系的抗震延性折减系数明显比其相应的等效单自由度体系的抗震延性折减系数小;RC框架结构的超强系数一般随结构楼层数的增加而减小,随抗震设防烈度的增大而减小,内框架的超强系数比边框架的超强系数大。 相似文献
18.
Seismic behavior and strength capacity of steel tube‐reinforced concrete composite columns
下载免费PDF全文
![点击此处可从《地震工程与结构动力学》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The steel tube‐reinforced concrete (ST‐RC) composite column is a novel type of composite column, which consists of a steel tube embedded in RC. In this paper, the seismic behavior of ST‐RC columns is examined through a series of experiments in which 10 one‐third scale column specimens were subjected to axial forces and lateral cyclic loading. The test variables include the axial force ratio applied to the columns and the amount of transverse reinforcement. All specimens failed in a flexural mode, showing stable hysteresis loops. Thanks to the steel tube and the high‐strength concrete it is filled with, the ST‐RC column specimens had approximately 30% lower axial force ratios and 22% higher maximum bending moments relative to the comparable RC columns when subjected to identical axial compressive loads. The amount of transverse reinforcement made only a small difference to the lateral load‐carrying capacity but significantly affected the deformation and energy dissipation capacity of the ST‐RC columns. The specimens that satisfied the requirements for transverse reinforcement adopted for medium ductile RC columns as specified by the Chinese Code for Seismic Design of Buildings (GB 50011‐2010) and EuroCode 8 achieved an ultimate drift ratio of around 0.03 and a displacement ductility ratio of approximately 5. The design formulas used to evaluate the strength capacity of the ST‐RC columns were developed on the basis of the superposition method. The predictions from the formulas showed good agreement with the test results, with errors no greater than 10%. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
19.
通过低周反复加载试验对6个锚定式方钢管混凝土柱-H形钢梁节点进行了试验研究,研究了不同轴压比情况下节点的破坏模式、延性、耗能性能、强度及刚度退化等。试验结果表明,破坏之前节点具有良好的滞回性能、延性及耗能能力,满足现行抗震规范的要求。锚定式方钢管混凝土梁柱节点可以用于拉力较小的节点。文中提出了有关的设计建议。 相似文献
20.
采用半经验半理论的方法对以受弯为主的钢筋混凝土柱对应于各主要损伤状态的侧向变形进行了研究。本文研究的主要损伤状态包括屈服、混凝土保护层压碎、剥落、纵向受力钢筋屈曲、极限状态五个状态。首先建立了各损伤状态下柱截面受压区高度的计算方法。接着,利用对美国太平洋地震工程研究中心(PEER)建立的钢筋混凝土柱的试验数据库的统计分析,采用平截面假定和钢筋混凝土受弯构件的塑性铰理论推出了混凝土保护层压碎时压区边缘混凝土的应变大小,混凝土保护层剥落、纵筋屈曲和进入极限状态时核心区混凝土边缘的压应变大小,进而建立了钢筋混凝土柱对应于各损伤状态的变形计算方法。利用本文提出的方法得到的变形计算值与PEER提供的试验数据在统计意义上有较好的一致性。该方法可为钢筋混凝土柱基于位移的抗震设计和抗震性能评价提供依据。 相似文献