High Potential Regions for Enhanced Geothermal Systems in Canada

Previous estimates of geothermal energy potential in Canada give an indication of available heat to be ‘farmed’ at depth. This article examines in more detail depth–temperature relationships near large population centers in western Canada, as well as remote communities in northern Canada, in order to provide a first order assessment of Enhanced Geothermal Systems (EGS) potential for electrical generation. Quantities of EGS thermal power output and electrical generation are dependent on output temperature and flow rate. We relate these potential power rates as a whole to drilling and installation cost for the doublet systems and triplet system. Results show areas with significant EGS potential in northern Alberta, northeastern British Columbia, and southern Northwest Territories related to high heat flow and thermal blanketing of thick sedimentary cover. Estimated installation costs in 2008 dollars are under 2 mln$/MW_e. We also estimate significant reductions in CO₂ emissions by conversion to geothermal electric production.     

Proactive Management of Ecosystem Services in Oil Sands Pre-mining Phase

Natural Resources Research - Ecosystems and their services are essential to human well-being, but mining activities often cause adverse impacts on these services. Although impact of mining...     

Simulation of Power Production from Dry Geothermal Well Using Down-hole Heat Exchanger in Sabalan Field,Northwest Iran

In this research, a simulation was performed for evaluating power production from an abandoned geothermal well as an enhanced geothermal system by injecting a secondary fluid. Abandoned wells, due to lack of fluid or very low transmissivity, are regarded among the low-to moderate-temperature resources that have the potential for heat production without any cost for deep drilling. Accordingly, they are taken as suitable sources of energy. In the present paper, an abandoned geothermal well at Meshkinshahr geothermal field in Sabalan district, northwestern Iran, with 3176 m depth was simulated. The bottom-hole temperature of 148 °C, as well as well casing size, and real thermal gradient for well were applied in the model. A 3D heat transfer simulation model was designed by considering a coaxial pipe as a down-hole heat exchanger between surrounding rocks of the well and injected fluid. Injected fluid to the well with specified pressure and temperature receives heat from rocks surrounding the well, until it reaches the bottom of the well and converts to vapor. The vapor returns to the surface from inner pipe with very low heat loss during its return. The inner pipe is isolated by a thin layer having a low heat conductivity to prevent heat loss from the returned fluid. It was observed that obtained heat in the well depends on temperature profile of the well, injection velocity, and fluid mass flow rate. The model results were optimized by selecting suitable parameters such as inlet injection speed and fluid flow rate to achieve the highest temperature of the fluid returned from the well. A binary power plant was also modeled to determine the extractable power using returned fluid as input using ammonia and isobutene, as working fluids in binary cycle. Finally, electric power of 270 kW was generated from well NWS3 using designed down-hole heat exchanger.     

Estimation of Shallow Geothermal Energy Resource in Canada: Heat Gain and Heat Sink

Maps of shallow depth (down to −250 m) temperature distribution across Canada show large variability, related mainly to surface climatic forcing. Very small changes of temperature with depth in the upper 250 m are related to heat gained by the subsurface due to recent global warming. Temperature data compiled from precise temperature logs in equilibrium wells, and temperature time series from a network of meteorological stations, allow calculation of the available heat energy for heating in the cold period and for cooling in peak warm months. Utilization of this energy resource has the potential for significant CO₂ reduction in Canada. The geothermal energy stored in the ground can be used, with the help of heat pumps, for heating, given very low winter temperatures. The amount of potential heat available is vast. In Canada, south of permafrost border, the integrated value of potentially available heat during the heating season down to −50 m is 1.1 E21 J (1100 quads).     

Prediction of Shale Plugs between Wells in Heavy Oil Sands using Seismic Attributes

A fundamental geologic problem in the Steam-Assisted Gravity Drainage (SAGD) heavy oil developments in the McMurray Formation of Northern Alberta is to determine the location of shales in the reservoirs that may interfere with the steaming or recovery process. Petrophysical analysis shows that a key acoustic indicator of the presence of shale is bulk density. In theory, density can be derived from seismic data using Amplitude Versus Offset (AVO) analysis of conventional or multicomponent seismic data, but this is not widely accepted in practice. However, with billions of dollars slated for SAGD developments in the upcoming years, this technology warrants further investigation. In addition, many attributes can be investigated using modern tools like neural networks; so, the density extracted from seismic using AVO can be compared and combined with more conventional attributes in solving this problem. Density AVO attributes are extracted and correlated with “density synthetics” created from the logs just as the seismic stack correlates to conventional synthetics. However, multiattribute tests show that more than density is required to best predict the volume proportion of shale (Vsh). Vsh estimates are generated by passing seismic attributes derived from conventional PP, and multicomponent PS seismic, AVO and inversion from an arbitrary line following the pilot SAGD wells through a neural network. This estimate shows good correlation to shale proportions estimated from core. The results have encouraged the application of the method to the entire 3D.     

Heavy Oil and Oil (Tar) Sands in North America: An Overview & Summary of Contributions

As conventional oil and gas reservoirs become depleted other unconventional energy sources have to be recovered and produced. Four of the major unconventional resources that are strategic for North American interests are heavy oil, oil sands, oil shales, and coal-bed methane. Recent interest and activity in Canada’s vast oil sands are progressing rapidly as soaring oil prices are fueling a ‘gold rush’ in oil sands development in Alberta. This interest is evident by the record-number of oil sands and heavy oil presentations at Energy Minerals Division (EMD)-sponsored sessions at the 2004 and 2005 Annual Conventions of the American Association of Petroleum Geologists (AAPG), held in Dallas, TX and Calgary, AB.     

A New Model for Heat Flow in Extensional Basins: Estimating Radiogenic Heat Production

Radiogenic heat production (RHP) represents a significant fraction of surface heat flow, both on cratons and in sedimentary basins. RHP within continental crust—especially the upper crust—is high. RHP at any depth within the crust can be estimated as a function of crustal age. Mantle RHP, in contrast, is always low, contributing at most 1 to 2 mW/m² to total heat flow. Radiogenic heat from any noncrystalline basement that may be present also contributes to total heat flow. RHP from metamorphic rocks is similar to or slightly lower than that from their precursor sedimentary rocks. When extension of the lithosphere occurs—as for example during rifting—the radiogenic contribution of each layer of the lithosphere and noncrystalline basement diminishes in direct proportion to the degree of extension of that layer. Lithospheric RHP today is somewhat less than in the distant past, as a result of radioactive decay. In modeling, RHP can be varied through time by considering the half lives of uranium, thorium, and potassium, and the proportional contribution of each of those elements to total RHP from basement. RHP from sedimentary rocks ranges from low for most evaporites to high for some shales, especially those rich in organic matter. The contribution to total heat flow of radiogenic heat from sediments depends strongly on total sediment thickness, and thus differs through time as subsidence and basin filling occur. RHP can be high for thick clastic sections. RHP in sediments can be calculated using ordinary or spectral gamma-ray logs, or it can be estimated from the lithology.     

Integration of Structural,Gravity, and Magnetic Data Using the Weights of Evidence Method as a Tool for Kimberlite Exploration in the Buffalo Head Hills,Northern Central Alberta,Canada

In the Buffalo Head Hills area a weights of evidence statistical approach was used to determine the spatial relationship of NNE-, NE-, NW-, and ENE-trending lineaments to known kimberlite locations. This method outlined different degrees of spatial correlation between and lineaments, with higher correlations defined for the NNE, NE, and ENE lineament data sets. A weights of evidence model then was constructed using the structural lineament maps, the Buffalo High and Buffalo Utikuma terrane boundary, Bouguer gravity data, and magnetic characteristics of the Buffalo High and Buffalo Utikuma terranes. The model reveals maximum favorability for kimberlite exploration along the Buffalo High and Utikuma terrane boundary in correspondence with NNE-trending lineaments and their intersections with NE and ENE lineaments. The relationship of the kimberlite occurrences along the Buffalo High-Buffalo Utikuma terrane boundary and structural lineaments seems to favor an hypothesis of kimberlite emplacement through a major zone of weakness in the basement, here characterized by the boundary between the Buffalo High and Buffalo Utikumaterranes.     

Regional climate changes drive increased scaled-chrysophyte abundance in lakes downwind of Athabasca Oil Sands nitrogen emissions

Several limnological and paleolimnological investigations have linked enhanced atmospheric nitrogen (N) deposition to nutrient enrichment and increased primary production. The Athabasca Oil Sands Region (AOSR) in northeast Alberta, Canada is a significant source of N emissions, particularly since development intensified during the 1990s, and recent paleolimnological investigations provide evidence of increased lake production in adjacent areas subject to enhanced N deposition. The AOSR, however, has also experienced atmospheric warming since ca. AD 1900, and therefore the relative effects of nutrient deposition and climate changes on lake production remain unclear. We undertook a factorial-design paleolimnological assessment of 16 lakes in northwest Saskatchewan to quantify changes in abundance and species composition of scaled chrysophytes over the past 100 years. Study sites included both N-limited and P-limited lakes within control regions, as well as lakes that receive enhanced N deposition from the AOSR. We hypothesized that a change in algal communities within N-limited AOSR-impacted lakes, without concurrent changes in the other lake groups, would suggest AOSR-derived N as a driver of enhanced primary production. Instead, marked increases in concentrations of scaled chrysophytes, mainly Mallomonas crassisquama, occurred in the recent sediments in cores from all four lake groups (N-limited vs. P-limited, impacted vs. control), suggesting that regional climate change rather than N deposition was the paramount process enhancing chrysophyte production. Because chrysophyte abundances tended to be higher in deep, lower-pH lakes, and chrysophyte time series were fit best by lake-specific generalized additive models, we infer that climate effects may have been mediated by additional catchment and/or lake-specific processes.     

Evaluation of Syenite as Feldspar Source: Piranshahr Pluton,NW of Iran

The syenites of Piranshahr pluton form homogeneous mesoperthite-rich rocks which are exposed over a large area (>30 km²). With >85% modal composition of feldspar and rare ferromagnesian minerals, the syenites are petrographically suitable for feldspar exploration. The chemical composition of the Piranshahr syenites (i.e., high Al₂O₃ and (Na₂O + K₂O)) is also appropriate for potential feldspar mining. By means of an inexpensive concentration procedure that includes high-intensive magnetic separation and cation collector floatation, it is possible to achieve the needed feldspar composition (high Al₂O₃ (~20%), (Na₂O + K₂O) >12.5% and low FeO_tot <0.25) for a marketable product. These data confirm economic potential of Piranshahr syenites as a huge feldspar source from the geologic and beneficiation perspectives.     

中国北方地区农业干旱脆弱性评价

在调查和分析中国北方地区农业生产现状的基础上,选择水资源、农业经济、社会和防旱抗旱能力4个准则层共16个指标构建农业干旱脆弱性评价指标体系。运用主成分分析法对高维变量系统进行有效降维,根据方差贡献率建立中国北方地区农业干旱脆弱性评价模型,获得中国北方地区水资源、农业经济、社会和防旱抗旱能力脆弱性评价结果,获得各省(自治区、直辖市)干旱脆弱性分级阈值和区划。结果表明:(1)通过主成分分析得到农业经济、水资源、防旱抗旱能力、社会等5个主成分,方差贡献率分别为41.99%、19.25%、14.06%、8.07%和5.32%。(2)中国北方地区农业干旱脆弱性从小到大依次为北京、天津、山东、辽宁、吉林、山西、内蒙古、安徽、河北、河南、陕西、宁夏、青海、黑龙江、新疆和甘肃。     

Holocene paleohydrology of a hypersaline lake in southeastern Alberta

Analyses of pollen, plant macrofossils, sediment mineralogy, geochemistry, and lithology of cores from Chappice Lake, southeastern Alberta, provide an outline of paleohydrological changes spanning the last 7300 radiocarbon years. Situated near the northern margin of the Great Plains, Chappice Lake is currently a small (1.5 km²), shallow (<1 m), hypersaline lake. Results of this study suggest that the lake has experienced significant changes in water level and chemistry during the Holocene.From 7300 to 6000 BP the lake oscillated between relatively high stands and desiccation. From 6000 to 4400 BP it was smaller than present and ponded highly saline water. Although extreme water level variations of the preceding period had ceased, pronounced seasonal fluctuations persisted. Between 4400 and 2600 BP, lake level was more stable but gradually rising. Carbonates were a major component of the sediments deposited during this interval. A large, relatively fresh lake existed from 2600 to 1000 BP. Illite was the dominant mineral deposited during this period, but since then has been a minor constituent in a mineral suite dominated by detrital silicates. A series of low-water, high-salinity stands occurred between 1000 and 600 BP, although these low stands were not as pronounced as low-water intervals in the middle Holocene. Relatively high water levels were sustained from 600 BP until the late 1800s. The lake declined significantly in the last one hundred years, notably during the historically documented droughts of the late 1800s, 1920s, 1930s, and 1980s.The timing of paleohydrological events at Chappice Lake corresponds closely with well documented Holocene climatic intervals, such as the Hypsithermal, Neoglaciation, Medieval Warm Period, and Little Ice Age. In addition, historic lake-level fluctuations can be related directly to climate. As a result, the Chappice Lake sedimentary succession offers a rare opportunity to obtain a high-resolution, surrogate record of Holocene climate on the northern Great Plains, and to observe the response of lake chemistry and biota to significant environmental change.Geological Survey of Canada Contribution No. 45191, Palliser Triangle Global Change Contribution No. 2This publication is the first of a series of papers presented at the Conference on Sedimentary and Paleolimnological Records of Saline Lakes. This Conference was held August 13–16, 1991 at the University of Saskatchewan, Saskatoon, Canada. Dr. Evans is serving as Guest Editor for this series.     

Geochemical Characteristics of Oil from Oligocene Lower Ganchaigou Formation Oil Sand in Northern Qaidam Basin,China

Oil from the Oligocene oil sands of the Lower Ganchaigou Formation in the Northern Qaidam Basin and the related asphaltenes was analyzed using bulk and organic geochemical methods to assess the organic matter source input, thermal maturity, paleo-environmental conditions, kerogen type, hydrocarbon quality, and the correlation between this oil and its potential source rock in the basin. The extracted oil samples are characterized by very high contents of saturated hydrocarbons (average 62.76%), low contents of aromatic hydrocarbons (average 16.11%), and moderate amounts of nitrogen–sulfur–oxygen or resin compounds (average 21.57%), suggesting that the fluid petroleum extracted from the Oligocene oil sands is of high quality. However, a variety of biomarker parameters obtained from the hydrocarbon fractions (saturated and aromatic) indicate that the extracted oil was generated from source rocks with a wide range of thermal maturity conditions, ranging from the early to peak oil window stages, which are generally consistent with the biomarker maturity parameters, vitrinite reflectance (approximately 0.6%), and T_max values of the Middle Jurassic carbonaceous mudstones and organic-rich mudstone source rocks of the Dameigou Formation, as reported in the literature. These findings suggest that the studied oil is derived from Dameigou Formation source rocks. Furthermore, the source- and environment-related biomarker parameters of the studied oil are characterized by relatively high pristane/phytane ratios, the presence of tricyclic terpanes, low abundances of C₂₇ regular steranes, low C₂₇/C₂₉ regular sterane ratios, and very low sterane/hopane ratios. These data suggest that the oil was generated from source rocks containing plankton/land plant matter that was mainly deposited in a lacustrine environment and preserved under sub-oxic to oxic conditions, and the data also indicate a potential relationship between the studied oil and the associated potential source rocks. The distribution of pristane, phytane, tricyclic terpanes, regular steranes and hopane shows an affinity with the studied Oligocene Lower Ganchaigou Formation oil to previously published Dameigou Formation source rocks. In support of this finding, the pyrolysis–gas chromatography results of the analyzed oil asphaltene indicate that the oil was primarily derived from type II organic matter, which is also consistent with the organic matter of the Middle Jurassic source rocks. Thus, the Middle Jurassic carbonaceous mudstones and organic rock mudstones of the Dameigou Formation could be significantly contributing source rocks to the Oligocene Lower Ganchaigou Formation oil sand and other oil reservoirs in the Northern Qaidam Basin.

     

Bayesian and Neural Network Approaches to Estimate Deep Temperature Distribution for Assessing a Supercritical Geothermal System: Evaluation Using a Numerical Model

The temperature distribution at depth is a key variable when assessing the potential of a supercritical geothermal resource as well as a conventional geothermal resource. Data-driven estimation by a machine-learning approach is a promising way to estimate temperature distributions at depth in geothermal fields. In this study, we developed two methodologies—one based on Bayesian estimation and the other on neural networks—to estimate temperature distributions in geothermal fields. These methodologies can be used to supplement existing temperature logs, by estimating temperature distributions in unexplored regions of the subsurface, based on electrical resistivity data, observed geological/mineralogical boundaries, and microseismic observations. We evaluated the accuracy and characteristics of these methodologies using a numerical model of the Kakkonda geothermal field, Japan, where a temperature above 500 °C was observed below a depth of about 3.7 km. When using geological and geophysical knowledge as prior information for the machine learning methods, the results demonstrate that the approaches can provide subsurface temperature estimates that are consistent with the temperature distribution given by the numerical model. Using a numerical model as a benchmark helps to understand the characteristics of the machine learning approaches and may help to identify ways of improving these methods.

     

A New Lithostratigraphic Framework for the Cretaceous Colorado Group in the Cold Lake Heavy Oil Area,East-Central Alberta,Canada

The Albian to Santonian Colorado Group in the heavy oil area of Cold Lake, east-central Alberta represents a relatively condensed section of shale-dominated sedimentation within the Western Interior Sea. These shales form the cap rock to the underlying Clearwater and Grand Rapids formations that are exploited for bitumen extraction. Two cores covering the entire Colorado Group provide a unique opportunity for establishment of a stratigraphic reference in an area that has received attention only for its heavy oil-bearing Mannville Group. Based on sedimentology, geochemistry, micropaleontology, nannofossils, and wireline log data, the Colorado Group was subdivided into the Joli Fou, Viking, Westgate, Fish Scales, Belle Fourche, Second White Specks, and Niobrara formations. The Niobrara Formation was subdivided further into the Verger Member, informal Cold Lake member, and First White Specks Member. Because of this region’s small accommodation space and distance to sources of coarse clastic sediment, disconformities are indicated lithologically by bioclastic layers and missing biozones. Foraminiferal subzones revealed two erosional boundaries associated with the Viking Formation. Faunal and floral evidence coupled with wireline log correlations suggest that the Middle to Upper Turonian Carlile Formation, as described from southeastern Alberta, is missing. That extends the Middle Turonian to Coniacian unconformity, as recognized in central Saskatchewan, westwards into Alberta.     

History of a presently slightly acidic lake in northeastern Alberta,Canada as determined through analysis of the diatom record

The Holocene sedimentary diatom record from Otasan Lake, Alberta, has been analyzed to determine the development of this presently slightly acidic lake. The changes in the lake have been linked to the development of the Sphagnum-dominated catchment. Analysis of the stratigraphic data revealed four distinct zones. The lake record began ca. 8200 yrs BP with a benthic and alkaline diatom assemblage dominated by Ellerbeckia arenaria (Moore) Crawford. At ca. 7300 yrs BP planktonic species began to increase and dominate indicating increased water levels, decreased turbidity, and increased nutrient levels. Throughout the Holocene the peatland in the catchment encroached toward the modern lake margin and by ca. 5000 yrs BP lake acidity had changed sufficiently such that acidic diatom species dominated. Tabellaria flocculosa (Roth) Kütz.v. flocculosa Strain IIIp sensu Koppen dominated the record from ca. 5000 to ca. 3100 yrs BP. The lowest lake water pH was inferred for this zone. From ca. 3100 yrs BP to the present Fragilaria species, primarily F. construens v. venter (Ehr.) Hustedt, dominated the diatom assemblage. Diatom productivity and inferred pH were interpreted as stable. From correspondence analysis of the fossil samples, and from species assemblages, underlying gradients of pH, nutrient level, and water depth were inferred. The change from alkaline to slightly acidic conditions took place between ca. 8200 and ca. 5000 yrs BP. From ca. 3000 yrs BP to the present, lake water pH has remained fairly constant. Nutrient levels and water depth were inferred to have altered together. After ca. 8200 yrs BP, nutrients and water level began to increase until ca. 6000 yrs BP. Then, there was a gradual decline in these variables over the most acidic zone until ca. 3000 yrs BP, after which they, too, have remained fairly constant. Dominant Boreal Upland Vegetation was established by ca. 7200 yrs BP, and it was inferred that dominant climate patterns had been established at that time, but small changes in climate have occurred and the landscape in northeastern Alberta has only been stable for the last 3000 years.     

Lithospheric flexure as a control on stratal geometry and fades distribution in Upper Cretaceous rocks of the Alberta foreland basin

Facies distributions, stratal geometry and regional erosional bevelling surfaces in Upper Cretaceous (Cenomanian-Santonian) strata of the Alberta foreland basin are interpreted in terms of high-frequency (probably eustatic) relative changes in sea level, superimposed on longer-term basin-floor warping, related to episodic tectonic loading. Thick marine shales correspond to periods of rapid subsidence whereas thin but extensive strandplain sandstones record rapid progradation during slow subsidence. Westward-thickening wedges of coastal plain strata were deposited during initial downwarping of a near-horizontal strandplain, prior to marine transgression. Surfaces of erosional bevelling beneath which between 40 and >160m of strata have been removed extend at least 300 km from the present deformation front and are interpreted to reflect forebulge uplift in the east. Uplift appears to have lagged about 0.25-0.5 Myr behind the onset of accelerated loading. Thin marine sandstones which grade westward into mudstone are interpreted as material winnowed from the crest of the rising forebulge. Subsidence and/or westward migration of the forebulge allowed the sea to flood westward across the eastern flank of the eroded forebulge. The transgressive shoreface cut asymmetric notches which were later blanketed by marine shales which lap out from east to west. The two unconformities which embody the largest erosional vacuity are veneered locally with oolitic ironstone which accumulated in a shallow, sediment-starved setting on the crest of the forebulge. The consistent pattern of erosional bevelling and lap-out of transgressive shales might be interpreted as evidence that the forebulge migrated towards the thrust load over a period of <1 Myr.     

Planning for growth in a natural resource boomtown: challenges for urban planners in Fort McMurray,Alberta

Between 2000 and 2010, the population of the city of Fort McMurray, Alberta increased by 80%, mainly due to the expansion of oil extraction projects and subsidiary industries. Population growth of this magnitude has significant consequences for city planning. While Fort McMurray struggles to keep up with enormous numbers of in-migrants, the cost of living in the city has skyrocketed. Using interviews with city planners and field experience in the city, in this paper I examine the current challenges faced by urban planners in Fort McMurray against the backdrop of global economic decision-making, corporate influence, and commodity dynamics. While the recession of 2008 gave city planners some breathing room, they still struggle with gathering accurate census information and predicting population growth, providing affordable housing, and balancing short-range planning with their long-term goals. Attempts by city planners to address these challenges could provide a contemporary model for urban planning in rapidly growing, resource-dependent communities.     

陕北黄土高原可持续发展评价研究

通过对陕北黄土高原可持续发展评价指标体系和方法的初步研究,设计出了包括 1个高级综合指标——可持续发展综合指数、人口状况等 5个基本指标和人口自然增长率等 30个元素指标的层次性指标体系结构框架,熵技术支持下确定可持续发展指标权重的层次分析法,以及由递阶多层次综合评价、主成份分析和回归分析等数学方法所集成的可持续发展全面综合评价模型,并依次对该地区可持续发展现状及趋势进行了全面分析评价。