中太平洋海山区尖顶和平顶海山结壳成矿与分布的比对研究

尖顶海山和平顶海山是洋底海山的两种类型,同时也是富钴结壳资源赖以成长的主要载体,两者在地形上具有显著差别,资源状况和分布也不尽一致。以地形分类为基础,就中太平洋海山区两类海山结壳的成矿特征、宏微观构造、矿物和化学组成以及空间分布等进行了比对研究。研究认为,尖顶海山体积虽小,但地形演化连续,底层流及环境氧化性较强,有利于结壳的长期稳定生长,结壳厚度总体较大,富成矿元素和生物组分,远景成矿区域连续绵长。平顶海山山体巨大,顶部和斜坡陡崖区不利于结壳成长,底流活动只在山顶边缘和山脊地带表现突出,环境氧化性整体较弱,后期构造活动相对频繁,结壳总体厚度较小,铁,碎屑和热液组分含量较高,远景矿区相对狭窄。     

火山岩浆活动与富钴结壳成矿间的关系——以中太平洋海山群和麦哲伦海山链所在的中西太平洋区为例

以中西太平洋的麦哲伦海山链和中太平洋海山群为例,从研究区的区域地质背景出发,概括了研究区富钴结壳的分布规律,简单的讨论了火山岩浆活动与富钴结壳成矿间的关系,认为中西太平洋海山上富钴结壳的分布与形成其赋存海山的火山岩浆活动及其后续的岩浆活动改造作用有关。     

中太平洋海山富钴结壳与基岩关系的研究

对我国首次取得的中太平洋海山基岩和富钴结壳样品的结构构造、矿物和化学组成特征的研究表明,该区主要基岩类型为碱性玄武岩、磷块岩、磷酸盐化碳酸盐岩和燧石等,碱性玄武岩分布最广,并均有不同程度的风化.观察表明,富钴结壳的载体可以是各种岩性的基岩.玄武岩、风化火山岩和磷块岩上的结壳厚度比燧石的大,有较高的经济价值,是选矿冶炼的主要对象.对于调查区内富钴结壳形态总体上可分为三种类型:板状、砾状和结核状结壳.从以下四个方面探讨结壳与基岩之间的关系:(1)海水、基岩和结壳中主要金属元素含量特点;(2)通过聚类分析方法探讨结壳与基岩之间的亲疏程度;(3)结壳的分布特征;(4)不同基岩类型对结壳生长的影响.分析结果表明,调查区内的火山岩及磷块岩对结壳形成的贡献大(比其他类型岩石).     

Deposition of hydrogenetic and hydrothermal manganese minerals in the Ogasawara (Bonin) Arc Area,Northwest Pacific

A widespread distribution of hydrothermal and hydrogenetic manganese deposits is described in the results of the Hakurei‐Maru cruises conducted in the Bonin Arc areas of the West Pacific from 1984 to 1989. Manganese deposits occur in the active volcano chains, back‐arc basins, remnant back‐arc ridges, and oceanic seamounts.

The hydrogenetic iron‐manganese deposits commonly form earthly black crusts and nodules on the topographic highs of inactive ridges and old seamounts, sometimes as thick as 10 cm. They are always composed of the iron‐manganese mineral vernadite. Co and Ni contents are relatively high in the crusts from the seamounts in the open Pacific Ocean (up to 1.1% Co and 1.0% Ni). Two generations of distinct chemistry and texture are typical of these crusts, which can be compared to reported thick crusts from the Central Pacific seamounts.

The hydrothermal deposits, characterized by dense, submetallic, and gray appearance, are dominant in the recent and also in past submarine volcanoes of the island‐arc systems. Evidence of past hydrothermal activity was ascertained as fossil hydrothermal manganese deposits inside the hydrogenetic nodules or beneath the hydrogenetic crusts over the Tertiary island arc. Their component minerals are considered to be todorokite and bimessite (stable and contractible upon dehydration), having almost negligible amounts of Fe, Si, Al, Ni, Co, Zn, Pb, Cu, etc. In the small model site, the Kaikata Seamount hydrothermal area, the presumably recent hydrothermal activity has yielded thin slabs of pure manganate deposits growing downward within volcanic and sand layers.

Early diagenetic influence is negligible on nodules of this area.     

Co–rich Mn crusts from the Magellan Seamount cluster: the long journey through time

The Magellan seamounts began forming as large submarine shield volcanoes south of the equator during the Cretaceous. These volcanoes formed as a cluster on the small Pacific plate in a period when tectonic stress was absent. Thermal subsidence of the seafloor led to sinking of these volcanoes and the formation of guyots as the seamounts crossed the equatorial South Pacific (10–0°S) sequentially and ocean surface temperatures became too high for calcareous organisms to survive. Guyot formation was completed between about 59 and 45 Ma and the guyots became phosphatized at about 39–34 and 27–21 Ma. Ferromanganese crusts began formation as proto-crusts on the seamounts and guyots of the Magellan Seamount cluster towards the end of the Cretaceous up to 55 Ma after the formation of the seamounts themselves. The chemical composition of these crusts evolved over time in a series of steps in response to changes in global climate and ocean circulation. The great thickness of these crusts (up to 15–20 cm) reflects their very long period of growth. The high Co contents of the outer parts of the crusts are a consequence of the increasing deep circulation of the ocean and the resulting deepening of the oxygen minimum zone with time. Growth of the Co-rich Mn crusts in the Magellan Seamount cluster can be considered to be the culmination of a long journey through time.     

Submersible observations of manganese nodule and crust deposits on the Tenpo Seamount,Northwestern Pacific

Pavements of manganese nodules and crusts and outcrops of Miocene limestones were observed on the flanks and flat top of the Tenpo Seamount during three Shinkai 2000 dives. The pre‐Miocene volcano supplied nuclei of volcanic rocks and hydrothermal manganese deposits, and subsequent slow or no sedimentation promoted deposition of abundant hydrogenetic nodules and crusts, mainly on the upper flank of the seamount. Nodule pavements generally cover calcareous sand surface sediments, while crusts cover hard outcrops composed probably of volcanic rocks. The fields of crusts and nodules are sparsely distributed with each other on scales of meters to tens of meters. The on‐site observation suggests the deposits have encountered tectonic and/or mass movements that resulted in unusual occurrences of densely stacked nodules and occasionally the nodules resting directly on crusts or hard substrates. Mineralogical and chemical compositions reveal that for nodules and crusts the encrusting manganese layers of around 1 cm thickness are composed of hydrogenetic vernadite, and diagenetic influence is negligible.     

富Co铁锰结壳铂族元素与铼-锇同位素组成及其意义

用ICP－MS测定了太平洋富Co铁锰结壳铂族元素和铼－锇同位素组成。富Co铁锰结壳不仅异常富集铂族元素，而且铂族元素及其它亲铁元素的配发与陨石特征非常相似。铁锰结壳的铼－锇同位素组成明显有别于大陆地壳岩石，和K－T界线沉积物相似，接近陨石值。世界大洋范围内的富Co铁锰结壳均产于远离海底构造热液活动区，几乎不可能受到地幔源热液作用的直接影响。因此，富Co铁锰结壳中的铂族元素可能部分来源于地外物质。     

Comparative mineralogy and geochemistry of hydrothermal iron‐rich crusts from the Pitcairn,Teahitia‐mehetia,and Macdonald hot spot areas of the S. W. pacific

Abstract

Hydrothermal iron‐rich crusts have been recovered from a number of hot spot volcanos including Crough Seamount, Pitcairn Volcanos 2 and 1, Cyana Seamount, Teahitia, Moua Pihaa, and Macdonald Seamount in the S. W. Pacific. Mineralogically, the crusts consists of ferrihydrite with traces of the weathering products of volcanic ash (feldspar, nontronite, pyroxene, and serpentinite). The iron oxyhydroxide phase has a mean particle size of 3–4 nm indicating rapid deposition. Electron microprobe studies have revealed the presence of filamentous iron‐silica deposits within the crusts reflecting the possible bacterial oxidation of iron from the hydrothermal fluids. The crusts display wide variability in composition both between individual sampling stations and between seamounts. Endmember analysis shows that the compositional data can be resolved into three endmembers: a Fe‐rich endmember, a light and heavy rare earth element endmember, and a Ba (barite)‐rich endmember. The Fe‐rich endmember appears to contain very low concentrations of most trace elements. For bulk samples, the composition of the iron‐rich crusts reflects dilution of the iron oxyhydroxide phase by volcanic ash and, to a lesser extent, a hydrogenous component. This is illustrated by the wide variability in SiO₂ (11.1–71.3%) and Mn (0.01–1.21%) contents of the crusts. For iron‐rich crusts containing greater than 40% Fe, the Pitcairn crusts display lower contents of Pb, Ba, Mo, U, Th, As, and rare earth elements (REE) and lower cerium anomalies than those from Teahitia. REE profiles of crusts from each of the hot spot volcanoes are characterized by small negative cerium anomalies but pronounced positive europium anomalies. The low average La/Fe ratios of the crusts from the various seamounts (47–572 X 10^‐6) and positive Eu anomalies of the crusts suggest rapid deposition of the iron oxyhydroxide near the hydrothermal vent. The high Fe/Mn ratio of vent fluids at hot spot volcanoes (8.5–5.6) may account for the formation of these iron‐rich crusts. The present data indicate that there may be differences in the nature of the iron‐rich crusts based on the depth of occurrence. This influences the temperature of the venting hydrothermal fluids and the possibility of occurrence of submarine phreatomagmatic eruptions.     

Intraplate Seamounts of the Northwest Sector of the Pacific Ocean

A method is proposed for identifying seamounts in the northwest sector of the Pacific based on the following criteria: a closed, close to isometric contour of the isobaths at the base of a structure, its quasi-conical shape, and angles of slope exceeding 5° within the limits of the closed contour. A catalog of the mountains has been compiled, consisting of 1995 objects and their quantitative characteristics. The catalog data were statistically processed, and the following was calculated: the correlation between the number of seamounts from the radius of their base and volume, the distribution of the number of mountains, and the total volume within the study area. It is shown that seamounts are characterized as multiscale, and they are located very unevenly: areas with and without their accumulation are distinguished, and the composition of volcanic rocks is typically isotopically and geochemically heterogeneous. It is concluded that currently there is no single geodynamic model that can explain the revealed phenomena in their entirety. At the same time, the data suggest that the nature of some magma chambers that feed intraplate volcanoes is caused by transformation of energy in the lithosphere as a nonlinear open system.     

大洋富钴结壳成因机制的探讨——水成因证据

根据对大洋富钴结壳的分层与年龄、分层与生长速率、生长间断等观测事实,以及大洋富钴结壳主量元素锰、铁元素及钴元素、铂元素、稀土元素、氦同位素、锇同位素等的水成富集,指出大洋富钴结壳是水成因的,进而指出富钴结壳的形成与基岩无关,水动力条件、最低含氧带、生物作用等可能对富钴结壳的形成有控制作用。同时,富钴结壳不一定只生长在岩石裸露的海山上,在沉积物覆盖的海山区也有可能找到富钴结壳。     

Mineral provinces and matter provenance of the surficial sediments in the western Philippine Sea: implication for modern sedimentation in West Pacific marginal basin

The characteristics and distribution patterns of detrital minerals (0.063~0.125 mm) in marine sediments provide a significant indicator for the identification of the origin of sediment.The detrital mineral composition of 219 surface sediment samples was analysed to identify the distribution of sediments within the western Philippine Sea. The area can be divided into three mineral provinces: (I) province east of the Philippine Trench, the detrital minerals in this province are mainly composed of calcareous or siliceous organisms, with the addition of volcanogenic minerals from an adjacent island arc; (II) middle mineral province, clastic minerals including feldspar, quartz and colorless volcanic glass, sourced from seamounts with intermediate-acid volcanic rock, or erupting intermediate-acid volcano; (III) province west of the Palau—Kyūshū Ridge, the matter provenance within this province is complex; the small quantity of feldspar and quartz may be sourced from seamounts or erupting volcano with intermediate-acid composition, with a component of volcanic scoria sourced from a volcano erupting on the Palau—Kyūshū Ridge. it is suggested that, (1) Biogenic debris of the study area is closely related to water depth, with the amount of biogenic debris controlled by carbonate lysocline. (2) Volcaniclastic matter derived from the adjacent island arc can be entrained by oceanic currents and transported towards the abyssal basin over a short distance. The weathering products of volcanic rocks of the submarine plateau (e.g.,Benham Plateau) and adjacent ridges provide an important source of detrital sedimentation, and the influence scope of them is constrained by the intensity of submarine weathering. (3) Terrigenous sediments from the continent of Asia and the adjacent Philippine island arc have little influence on the sedimentation of this study area, and the felsic mineral component is probably sourced from volcanic seamounts of intermediate-acid composition.     

中太平洋海山演化史及与富钴结壳的关系

中太平洋海山区是海山富钴结壳广泛分布的一个重点地区，目前我国正在该区进行富钴结壳资源调查，了解该区海山形成演化史对研究富钴结壳的成因及其分布规律有重要意义。根据大量的文献资料，对该区海山演化史进行了综述，并对海山与其上生长的富钴结壳的关系进行了探讨。     

Deep-sea Fe-Mn Crusts from the Northeast Atlantic Ocean: Composition and Resource Considerations

Eighteen deep-sea ferromanganese crusts (Fe-Mn crusts) from 10 seamounts in the northeast Atlantic were studied. Samples were recovered from water depths of ～1,200 to ～4,600 m from seamounts near Madeira, the Canary and Azores islands, and one sample from the western Mediterranean Sea.

The mineralogical and chemical compositions of the samples indicate that the crusts are typical continental margin, hydrogenetic Fe-Mn crusts. The Fe-Mn crusts exhibit a Co + Cu + Ni maximum of 0.96 wt%. Platinum-group element contents analyzed for five samples showed Pt contents from 153 to 512 ppb.

The resource potential of Fe-Mn crusts within and adjacent to the Portuguese Exclusive Economic Zone (EEZ) is evaluated to be comparable to that of crusts in the central Pacific, indicating that these Atlantic deposits may be an important future resource.     

全球三大洋海山钴结壳资源量估算

钴结壳具有Co、Ni、Cu和Mn及其他金属的潜在矿产资源和储存在结壳层中古环境信息的双重意义。与深海多金属结核和热液硫化物矿床相比,具有较高Co、Ni和Pt含量的海山钴结壳有可能成为商业勘探的潜在目标。为合理地估算出全球三大洋海山钴结壳资源量,基于我国西太平洋海山钴结壳拖网采样调查资料和对太平洋海山钴结壳资源分布规律和钴结壳矿区圈定参数指标的深入研究,按海山不同高度、不同洋壳年龄赋予不同结壳厚度,进而计算出全球三大洋海山钴结壳分布面积为3 039 452.14km2和干结壳资源量为(1 081.166 1~2 162.332 2)×108 t。太平洋海山钴结壳分布面积为2 123 087.12km2和干结壳资源量为(513.244~1 026.488)×108 t,大西洋海山钴结壳分布面积为512 509.74km2和干结壳资源量为(116.503 2~233.006 4)×108 t,印度洋海山钴结壳分布面积为403 855.28km2和干结壳资源量为(81.484 9~162.969 8)×108 t。三大洋海山钴结壳的Mn、Co、Ni和Cu金属量分别为(138.848 0~277.696 0)×108 t,(3.967 6~7.935 2)×108 t、(2.793 6~5.587 2)×108 t和(0.825 1~1.650 2)×108 t。根据钴结壳的Co含量、Co通量和厚度相关分析,所赋予的钴结壳厚度占理论推测厚度的6.10%~12.20%,这与Ku等得出"钴结壳生长时间约占其整个生命史4%"的认识非常相近。三大洋海山钴结壳实测厚度与赋值厚度对比分析表明,太平洋海山钴结壳赋值厚度平均值为1.87cm,实测厚度平均值为1.77cm,相对误差为5.35%,大西洋和印度洋相对误差分别为18.18%和23.23%。研究数据表明按海山高度和洋壳年龄所赋的钴结壳厚度基本合理,估算出的钴结壳资源量基本可靠。本文首次估算出三大洋海山钴结壳资源量,为整个海盆和三大洋海山钴结壳资源量估算提供了新方法。     

富钴结壳分布的分形特征

利用我国在西太平洋国际海底两个海山获得的富钴结壳资料进行分形研究后发现，富钴结壳的分布具有变维分形分布的特点，结壳丰度呈二阶累计和分形分布，结壳厚度呈多阶不定累计和分形分布，通过计算得到了它们各自的分维数，进而对两个海山的结壳资源进行了初步评价。     

Fisheries for orange roughy (Hoplostethus atlanticus) on seamounts in New Zealand

Major commercial fisheries for orange roughy (Hoplostethus atlanticus) occur on seamount features, which are widely distributed throughout the New Zealand region. When the fishery developed in the late 1970s to early 1980s, it occurred mainly on flat bottom, but over time has become more focused on seamounts. In the 1995–1996 fishing year, it is estimated that about 70 % of the catch of orange roughy within the New Zealand EEZ was taken from seamounts. Seamounts on the Chatham Rise have been fished for over ten years. Examination of commercial catch and effort data show strong declines in catch rates over time, and a pattern of serial depletion of seamount populations, with the fishery moving progressively eastwards to unfished seamounts along the southern margins of the Rise. Catch rates on seamounts in other regions of New Zealand have also generally shown a similar pattern of rapid decline. There is growing concern over the impact of trawling on seamounts, and the effects this can have on the benthic habitat and fauna, and the long-term sustainability of associated commercial fisheries.     

南海中部海盆海山磁性反演及初步解析

南海中部海盆分布着众多海山,从实测磁异常反演海山磁性是南海海盆古地磁研究新的重要课题,它有助于解决南海海盆的运动方向和运动形式等问题.对南海海盆16座海山作磁性反演取得了较高的计算精度.对南海中部海盆海山磁性反演表明,海山均为非均匀磁化体,海山形成经过多期火山喷溢叠加.海山磁性差异清晰地显示了海盆分区特征.南海海盆分东部海盆区和西南部海盐区,海盆地壳运动规律差异较大:东部海盆以逆时针旋转由南往北运移;西南海盆先经历了顺时针旋转,后改为逆时针旋转,由北往南运移.     

中西太平洋海山形态类型与钴结壳资源分布关系

通过对中西太平洋海山形态剖面的山体高度、山顶直径、基底直径、山顶直径与基底直径之比、山体坡度、山体高度与基底直径比值六个参数多元统计分析,发现可以根据山体高度与基底直径的比值对海山形态类型进行分类:比值小于0.10的为平顶海山(Ⅰ类),大于0.10的为尖顶海山(Ⅱ类),对于等于0.10的海山需参考平坦度和山体坡度,平坦度大和山体坡度缓的为Ⅰ类,反之为Ⅱ类。西太平洋的麦哲伦海山区、马绍尔群岛基本以平顶海山为主,介于中西太平洋之间的威克—马尔库斯海山区和中太平洋海山区、莱恩群岛平顶海山与尖顶海山共同发育。对各种类型海山上钴结壳分布研究发现,无论是在尖顶海山还是在平顶海山,板状结壳均比较发育,但砾状结壳在平顶海山比在尖顶海山的发育。中太平洋尖顶海山的结壳比平顶海山的发育,但由于山顶面积小,钴结壳资源量不大。仅从平顶海山看,在麦哲伦海山区、威克—马尔库斯海山区板状结壳比中太平洋海山区、马绍尔群岛、莱恩群岛的板状结壳发育,前者的板状结壳平均厚度大于3 cm,后者的板状结壳平均厚度小于3 cm,总体上是西太平洋平顶海山钴结壳比中太平洋平顶海山的发育。两种类型海山各方向上的资源分布明显不同,在平顶海山的西部山坡的资源比东部山坡的丰富,尖顶海山的则刚好相反。     

Ferromanganese Nodules and Crusts from the Christmas Island Region,Indian Ocean

A sampling expedition has shown that largely hydrogenetic marine ferromanganese deposits occur in the Christmas Island region south of Java (~10°S), as small nodules on seamount slopes and abyssal plains (red clay), and as thick crusts on volcanic ridges and seamounts. Vernadite is dominant, with birnessite, jacobsite and todorokite common. Nodules were recovered in 25% of free-fall grab stations in water 4600-5900 m deep, and are not abundant where present. The nodules average 9.6% Fe, 19.7% Mn, 0.51% Ni, 0.49% Cu, and 0.12% Co. Crusts are common in water 1450-3700 m deep, with average deposition rates of 1-1.5 mm / m.y. The crusts average 13.9% Fe, 16.2% Mn, 0.35% Ni, 0.11% Cu, and 0.44% Co. Cobalt grades are higher (~0.8%) in shallower water ( < 2500 m), so future exploration should concentrate on depths of 500-1500 m near the oxygen minimum zone.     

The volumes of volcanic seamounts as a factor determining the formation of the ocean floor’s morphostructure

The volumes of formed volcanoes are an important indicator of the formation intensity of the ocean floor volcanogenic morphostructure under different geodynamic conditions. The distribution of the volumes of volcanoes that formed within the oceanic lithosphere of different geological ages is considered to analyze the spatial and time dynamics of the scopes of the seamount formation. The greatest volumes of effused rocks concentrate in volcanoes of different heights on the different-age segments of the lithosphere. The total volumes of volcanogenic substance growing with increasing age and thickness of the lithosphere is caused by the increasing range of the heights of the formed volcanoes and the growing number of big seamounts. Despite that the volcanic seamounts formed within the mid-oceanic ridges, on the divergent boundaries of the lithospheric plates and in the transform faults most often, half of the volcanogenic material was emitted to the earth’s surface during the spreading of the intraplate volcanism. A leading part in the formation of the volcanogenic morphostructure of the ocean floor belongs to the formation of big seamounts with heights of 4–6 km and volumes from 1500 to 5100 km³, respectively, in the provinces with ages from 60 to 90 mln years.