From intra-oceanic subduction to arc accretion and arc-continent collision: Insights from the structural evolution of the Río San Juan metamorphic complex,northern Hispaniola

The Río San Juan metamorphic complex exposes a segment of a high-pressure subduction-accretionary complex built during Caribbean island arc-North America continental margin convergence. It is composed of accreted arc- and oceanic-derived metaigneous rocks, serpentinized peridotites and minor metasediments forming a structural pile. Combined detailed mapping, structural and metamorphic analysis, and geochronology show that the deformation can be divided into five main events (D1–D5). An early subduction-related D1 deformation and M1 metamorphism produced greenschist (mafic rocks of the Gaspar Hernández peridotite-tectonite), blueschist and eclogite (metamafic blocks in the Jagua Clara mélange), high-P epidote-amphibolite and eclogite (Cuaba unit), and lower blueschist and greenschist-facies conditions (Morrito unit). This was followed by M2 decompression and cooling in the blueschist, greenschist and low-P amphibolite-facies conditions. The shape of the retrograde P-T path, the age of the exhumation-related D2 structures, and the tectonic significance of D2 deformation are different in each structural unit. Published U–Pb and ⁴⁰Ar/³⁹Ar plateau ages and T-t/P-t estimations reveal diachronic Turonian-Coniacian to Maastrichtian retrograde M2 metamorphism in the different structural units of the complex, during a consistent D2 top-to-the-NE/ENE tectonic transport. Regionally, a similar top-to-the-ENE tectonic transport also took place in the metasedimentary nappes of the Samaná complex during the Eocene to earliest Miocene. This kinematic compatibility indicates a general northeastward progradation of deformation in the northern Caribbean convergent margin, as the successive tectonic incorporation of arc, oceanic and continental-derived terrains to the developing Caribbean subduction-accretionary complex took place. D3–D5 deformations are discontinuous and much less penetrative, recording the evolution from ductile to brittle conditions of deformation in the complex. The D3 event substantially modified the nappe-stack and produced open folds with amplitudes up to kilometer-scale. The Late Paleocene-Eocene D4 structures are ductile to ductile–brittle thrusts and inverse shear bands. D5 is a Tertiary, entirely brittle deformation that had considerable influence in the geometry of the whole complex. From the Miocene to the Present, it has been cut and laterally displaced by a D5 sinistral strike-slip fault system associated with the Septentrional fault zone.     

Archaean tectonics in the Agnew supracrustal belt,Western Australia

The Agnew supracrustal belt consists of a greenstone sequence (interlayered metabasalt, differentiated gabbroic sills, ultramafic bodies, and black volcanogenic sediment) unconformably overlain by granitoid-clast conglomerate and meta-arkose. The base of the preserved sequence is intruded by grey tonalite with a crudely concordant upper contact, and by small discordant bodies of leucogranite.An early deformation (D1) produced isoclinal folds and a regional penetrative foliation. These structures were probably gently dipping when formed. D2 produced large-scale NNW-trending upright folds, a regional foliation, and a vertical N-trending ductile fault on the west side of the belt. D2 structures indicate a combination of ENE-WSW shortening, and right-lateral shear along the ductile fault. Both D1 and D2 were accompanied by metamorphism under upper greenschist to lower amphibolite facies conditions.The interpreted sequence of tectonic events is (1) deposition of the greenstone sequence on an unknown basement; (2) intrusion of large volumes of tonalite, separating the supracrustal rocks from their basement; (3) erosion of mafic rocks and tonalite to produce the clastic sedimentary sequence; (4) the first deformation; (5) intrusion of small volumes of leucogranite; (6) the second deformation.The bulk of the granitoid rocks were emplaced before the first recognisable deformation. Thus the granitoid magma cannot have been produced by partial melting of previously downbuckled ‘greenstone belt’ rocks, nor can the large-scale upright folds (D2) be a result of forceful emplacement of the magma — two common postulates for Archaean terrains. The D2 folds are closely related to the ductile fault bounding the zone: these structures, which give the present N-trending tectonic belt its form, are the youngest features in the terrain.     

Emplacement of eo-Alpine high-pressure rocks in the Austroalpine Ötztal complex (Texel group,Italy/Austria)

In the southeastern Ötztal basement remnants of eo-Alpine high-pressure metamorphism as well as deformation related to the emplacement of these eclogites are preserved. The eo-Alpine age of the two main ductile deformation phases is constrained by Ar-Ar and Rb-Sr mica cooling ages of about 80 Ma, providing a lower, and by deformed Permo-Mesozoic rocks, providing an upper time limit. While high-pressure minerals (M₁) are aligned along structures of the first deformation phase (D₁), subsequently grown amphibolite facies minerals (M₂) are late- to post-kinematic with respect to the third phase (D₃). D₁ is characterized by non-coaxial deformation producing an E-W oriented stretching lineation, the younger phases D₂ and D₃ by folding, where the older set of folds strikes N-S, the younger one E-W. These results imply a basic change of tectonic movement direction during the eo-Alpine event. Structural and petrological evidences favour a two-stage exhumation model, where tectonic exhumation (D₁, D₂ and D₃) is correlated with the first stage, statically overprinted under amphibolite facies conditions (M₂). As there is no evidence of significant deformation after this stage, erosion and surface uplift most probably represent the relevant processes for the last part of the exhumation path. During this stage the high-pressure rocks were exhumed from amphibolite facies conditions to the surface.     

太行山南段自立庄韧性剪切带变形特征

太行山南段临城自立庄地区古元古界甘陶河群中低级变质岩中发育一条左行逆冲型韧性剪切带。自立庄韧性剪切带出露长约10 km,宽约1 km,走向NNE,往西缓倾,在EW方向上由若干条强变形带与其间的弱变形域或岩块组成,平面上呈现平行式的组合特征。该韧性剪切带内发育糜棱岩、拉伸线理和皱纹线理、不对称褶皱、石香肠构造和构造透镜体、S-C面理和旋转碎斑等宏观和微观构造。S-C面理、旋转碎斑、不对称褶皱等宏微观变形特征一致表明自立庄韧性剪切带上盘由西往东逆冲的运动学性质。在对韧性剪切带宏观、微观构造特征研究基础上,结合区域资料,认为自立庄韧性剪切带的形成与华北克拉通古元古代末期西部陆块与东部陆块的EW向碰撞拼合有关,是18.5 Ga吕梁运动的产物。自立庄韧性剪切带的厘定为太行山南段古元古代构造演化提供了基础资料。     

吉林省金城洞绿岩带构造变形序列

金城洞绿岩带自晚太古代以来经历了多期变形：Ｄ＿１变形幕，形成片理、片麻理及无根褶曲，是深部构造层次的产物；Ｄ＿２变形幕，形成轴面片理及一系列轴向ＮＷ或ＮＷＷ向的紧闭同斜或平卧褶皱，并伴有英云闪长岩—奥长花岗岩侵入，是中深部构造层次的产物；Ｄ＿３变形幕，形成大型开阔褶皱，晚期形成韧性剪切带，是中浅部构造层次的产物。这三幕变形奠定了本区的基本构造格架。Ｄ＿４变形幕在中浅构造部位形成ＮＥ向开活褶皱。古生代以来，本区主要发生脆性变形。     

华北克拉通东部地块和大别—苏鲁造山带印支期褶皱-逆冲构造与动力学背景

大别-苏鲁造山带不同岩片(块)经历了不同的褶皱变形.榴辉岩块(或透镜体)和硬玉石英岩片经历了高压-超高压背景下的两幕褶皱变形之后,在区域性第一幕变形期间主要发生透镜化为主,后期与围岩共同经历紧闭同斜第二幕褶皱.而其它岩片主要经历了现今野外可见的区域性三幕褶皱,其中区域性第一幕褶皱为片内残留褶皱,在斜长角闪岩透镜体中多见,宏观规律不明.区域性第二幕褶皱在露头尺度多见,轴面为折劈理,局部强烈置换成片理化带(复合片理或第二期片理),恢复第三幕褶皱改造作用后,揭示出各种岩片中的各级尺度的第二幕褶皱都为轴面北西倾南东倒、轴迹走向为NNE向的紧闭不对称褶皱,不对称性一致反映其指向与各种岩片向南东的逆冲运动有关.第三幕褶皱为以片理或折劈理为变形面的宽缓褶皱,轴迹走向NWW,枢纽向西倾伏.韧性剪切带为非透入性构造,分早晚两期,早期为韧性逆冲,新县穹隆以南,运动学标志指示向北逆冲,错切第二幕褶皱,结合新县穹隆北部向南的逆冲特征,反映这些韧性逆冲断层多数为第二幕大型褶皱翼部的次级逆冲断层;晚期为韧性滑脱带,其发育局限于几个岩性差异较大的接触带,带内伸展型折劈理发育,并对挤压构造样式有重要的改造作用.华北克拉通东部地块是华北克拉通的重要组成,其盖层古生界和三叠系在印支运动期间经历了一幕宽缓褶皱作用,其轴迹方向主体也为NWW向.这一褶皱构造明显在变形时间、变形样式和展布方向上都和大别-苏鲁造山带中的第三幕褶皱非常一致,说明它们具有动力学上的必然联系.同时,研究表明在华北克拉通东部地块中没有经历大别-苏鲁造山带中区域性第一、第二幕褶皱变形的记录,故本文认为印支期这两幕变形主要发生在华北板块东南缘的边界上,并没有波及到板内,而且从东向西高压-超高压岩石剥露具有穿时性.只有当华北板块和华南板块在第二幕变形之后构成了统一块体后,第三幕变形才波及华北板内.     

大别-苏鲁超高压和高压变质带构造演化

大别—苏鲁是世界上超高压 (UHP) ( >2 .7GPa)和高压 (HP)变质岩石出露最为广泛的地区。通过区域研究 ,尤其是在选择的 30多个关键位置上不同尺度构造记录的深入观察 ,结合已有的可利用的变质、热事件及同位素年代学资料分析 ,揭示出它们曾遭受过一个复杂的从深俯冲到折返构造演化历程 ,识别出 5个主要的构造变质事件 :( 1)由块状榴辉岩中发育的微弱面理和线理所代表的第 1期变形变质事件 (D1) ;( 2 )面状榴辉岩中发育的含拉伸线理的透入性主面理、中小型鞘状褶皱及网络状韧性剪切带 ,代表第 2期构造变质事件 (D2 ) ;( 3)第 3期变形事件主体发生于麻粒岩 /角闪岩相后成合晶形成之后 ,主要构造记录是区域性陡倾斜面理及不均一置换的成分层、榴辉岩透镜体及布丁群、面理内褶皱、网状韧性剪切带系统以及减压部分熔融作用形成的混合岩和含榴花岗质岩石组构 ;( 4)区域性的碰撞期后地壳韧性薄化及剪张作用 (D4)形成缓倾斜角闪岩相主面理及线理、穹状及弧形构造和多层韧性拆离带 ,它们主导了现今观察到的大别—苏鲁超高压和高压变质带的区域构造几何图像 ;( 5 )第 5期构造热事件 (D5)表现为不均一断块抬升、红色沉积盆地发育及大规模的岩体和岩脉就位 ,代表造山晚期的构造揭顶及坍陷作用 ,该期构造控制着造山带     

安徽张八岭地区西冷岩组早期构造变形特征

安徽张八岭地区西冷岩组早期构造变形复杂，主要表现为褶皱以及与褶皱变形密切相关的韧性剪切变形。野外调查表明，该地层中至少发育3期褶皱变形，其中F1为北西向韧性剪切褶皱；F2为向南南西倾伏的纵弯褶皱；F3为近东西向的宽缓褶皱。F1与F：联合制约了西冷岩组岩层展布的总体格局。显微构造，特别是岩石的磁性组构特征证明了区内曾发生过多期构造变形，且有两期最为显著，即早期的水平剪切和随后发生的侧向挤压。本文重点阐述上述褶皱变形的几何学特征，并进行运动学和动力学分析。     

Ductile deformations of opposite vergence in the eastern part of the Guerrero Terrane (SW Mexico)

The Teloloapan volcanic arc in SW Mexico represents the easternmost unit of the Guerrero Terrane. It is overthrust by the Arcelia volcanic unit and is thrust over the Guerrero–Morelos carbonate platform. These major structures result from two closely related tectonic events: first, an eastward verging, ductile deformation (D1) characterized by an axial-plane schistosity (S1) supporting an E–W trending mineral stretching lineation (L1) and associated with synschistose isoclinal, curvilinear folds (F1). Numerous kinematic indicators such as asymmetrical pressure-shadows, porphyroclast systems, and micro-shear bands (S–C structures) indicate a top-to-the-east shear along L1. This first deformation was followed by another ductile event (D2) that produced a crenulation cleavage (S2) associated with westward overturned folds (F2), hence showing that the vergence of D2 is opposite to that of D1. Regionally, both D1 and D2 deformations have been identified east and west of the Teloloapan unit, in the Arcelia volcanic rocks as well as in the Mexcala flysch of Late Cretaceous age overlying the Guerrero–Morelos platform. This implies that all three units were deformed and thrust simultaneously, during the Late Cretaceous or Paleocene, prior to the deposition of the overlying, undeformed Eocene red beds of the Balsas group.     

Polyphase greenschist-facies reactivation of the Dent Blanche Basal Thrust (Western Alps) during progressive Alpine orogeny

This study assesses the significance, geometry, and kinematics of greenschist-facies deformation along the Dent Blanche Basal Thrust (DBBT), a major tectonic contact in the Internal Western Alps of Switzerland and Italy. The DBBT separates continental units of the Dent Blanche nappe, the structurally highest unit in the Western Alps, from underlying Piemont-Ligurian ophiolites. Mylonites and deformation structures along the contact provide a record of its retrograde greenschist-facies evolution after earlier high-pressure metamorphism. A first phase of foreland-directed, reverse-sense, top-(N)W shearing (D1) occurred between ca. 43 and 39 Ma, related to exhumation of the Dent Blanche nappe from high-pressure conditions. It led to the formation of mylonitic fabrics under high- to medium-grade greenschist-facies conditions along the entire DBBT. A phase of ductile normal-sense top-SE shearing (D2) at ca. 38–37 Ma was mainly localized within underlying ophiolitic units and only partly affected the DBBT. Another phase of ductile deformation (D3) under medium- to low-grade greenschist-facies conditions at ca. 36–35 Ma occurred in response to underthrusting of European continental margin units and resulted in the updoming of the nappe stack. Especially the southeastern DBBT was characterized by bulk top-NW shearing, partly conjugate top-NW/top-SE shearing, and resulting orogen-perpendicular crustal extension. Subsequently, the DBBT was affected by a phase of orogen-perpendicular shortening (D4) and formation of folds and crenulations at ca. 34–33 Ma due to increasing compressional tectonics. Finally, a phase of semi-ductile to brittle normal-sense top-NW and conjugate shearing (D5) from ca. 32 Ma onwards particularly affected the southeastern segment and indicates exhumation of the DBBT through the ductile–brittle transition. This was followed by brittle NW–SE extensional deformation. This study suggests that the DBBT experienced a polyphase deformation and reactivation history under decreasing greenschist-facies metamorphic conditions during which different segments of this major shear zone were variably affected.     

Paleozoic Accretion-Collision Events and Kinematics of Ductile Deformation in the Eastern Part of the Southern-Central Tianshan Belt, China

The Tianshan range could have been built by both late Early Paleozoic accretion and Late Paleozoic collision events. The late Early Paleozoic Aqqikkudug-Weiya suture is marked by Ordovician ophiolitic melange and a Silurian flysch sequence, high-pressure metamorphic relics, and mylonitized rocks. The Central Tianshan belt could principally be an Ordovician volcanic arc; whereas the South Tianshan belt, a back-arc basin. Macro- and microstructures, along with unconformities, provide some kinematic and chronological constraints on 2-phase ductile deformation. The earlier ductile deformation occurring at ca. 400 Ma was marked by north-verging ductile shearing, yielding granulite-bearing ophiolitic melange blocks and garnet-pyroxene-facies ductile deformation, and the later deformation, a dextral strike-slip tectonic process, occurred during the Late Carboniferous-Early Permian. Early Carboniferous molasses were deposited unconformably on pre-Carboniferous metamorphic and ductilely sheared rocks, implying t     

桐柏碰撞造山带及其邻区变形特征与构造格局

桐柏碰撞造山带及其邻区可以划分为九个大地构造单元,自北向南分别是:华北克拉通南缘岩石构造单元——宽坪岩群、具弧后盆地性质的二郎坪岩石构造单元、具岛弧性质的秦岭杂岩单元、龟山岩组和南湾岩组构成的俯冲前缘楔构造带、构造混杂岩带、桐柏北部高压岩片单元、桐柏核部杂岩单元、桐柏南部高压岩片单元以及随州构造变形带。根据详细的构造解析以及新的地质年代学资料,本文将中生代以来的构造变形划分为五幕,前两幕变形主要发育在构造混杂岩带以南的各个岩石构造单元中,之后的三幕变形则波及整个研究区。第一幕变形的时间约为255～238Ma,以发育区域上透入性的片理及北西西向的拉伸线理为主,并导致了高压岩片早期自西向东的挤出。第二幕变形的时间约为230～215Ma,以自北向南的逆冲推覆构造为主,使得高压岩片进一步垂向抬升。第三幕变形应早于下侏罗统,以近北西西向的宽缓褶皱为主要特征,该幕变形期间桐柏核部杂岩及其两侧高压岩片单元发生同步的抬升。第四幕变形大致发生在140～130Ma之间,主要表现为桐柏核部杂岩两侧走滑型韧性剪切带的活动,桐柏核部杂岩表现出向东的挤出。第五幕变形发生在120～80Ma,表现为北西向及北东向的脆性断裂活动,并切割以上所有构造形迹。桐柏高压岩片的抬升剥露受多幕变形控制,呈阶段性的抬升。     

库鲁克塔格赛马山一带中元古界构造变形研究

通过构造解析的研究，确定赛马山地区中元古代所发生的阿尔金运动共有三幕变形，第一幕发生在长城纪早期，为EW向伸展机制下中部构造相的大规模顺层滑脱韧性变形，形成了赛马西山顺层滑脱韧性变形带，具超塑性流动变形特征和多层结构样式，第二幕发生在长城纪末，为主期变形，在NS向挤压机制下，在浅部构造相形成了EW向紧闭褶皱（局部倒转褶皱），并卷入早期的顺层滑脱韧性变形带，褶皱后期，由于应力的集聚，在浅表层次下，沿兴地塔格群内岩层软弱面发生剪切而形成了滑脱面，产生由南向北的逆冲，形成了具叠瓦扇结构的永红山飞来峰构，第三幕，蓟县纪末由于SN向强烈挤压后出现“松驰”引张而产生EW向挤压应力，形成NS向开阔褶皱，叠加于主期褶皱之上，形成了赛马西山－永红山穹盆构造。     

The geometry and kinematics of flow perturbation folds

Minor folds formed synchronous with ductile deformation in high strain zones can preserve a record of the scale and kinematics of heterogeneous flow. Using structures associated with WNW-directed Caledonian thrusting in N Scotland, we show that localised perturbations in flow resulted in the generation of predominantly cylindrical minor folds with hinges lying at low angles to the transport direction. These define a series of larger-scale fold culminations (reflecting ‘surging flow’) or depressions (reflecting ‘slackening flow’) that are bisected by transport-parallel culmination and depression surfaces. The fold patterns suggest a dominance of layer-normal differential shearing due to gradients in shear strain normal to transport. Culmination surfaces are marked by along-strike reversals in the polarity of structural facing and vergence of minor folds which, contrary to classic fold patterns, define reverse asymmetric relationships. Culmination surfaces separate folding in to clockwise (Z folds) and anticlockwise (S folds) domains relative to the transport lineation. The dip of fold axial planes systematically increases as their strike becomes sub-parallel to transport resulting in a 3D statistical fanning arrangement centred about the transport direction. Thus, mean S- and Z-fold axial planes intersect precisely parallel to the transport lineation and potentially provide a means of determining transport directions in cases where lineations are poorly preserved. Culminations display convergent fold patterns with fold hinges becoming sub-parallel to transport towards the culmination surface and underlying detachment, whilst axial planes define overall concave up listric geometries which are bisected by the culmination surface. Thus, around culminations and depressions there are ordered, scale-independent relationships between transport direction, shear sense, fold facing, vergence and hinge/axial plane orientations. The techniques described here can be applied and used predictively within any kinematically coherent system of ductile flow.     

Evolution of thrust system deformation in an intracratonic chain: Study of the Southern-Central Tunisian Atlas

The development of belt structures in intracratonic chains is guided by the convergence system. In the Southern-Central Tunisian Atlas, several parameters control the evolution of thrust folds during different tectonic phases. One of these phases is tectonic inheritance, which leads to the reactivation of pre-existing normal faults during compressive phases. The angle between the direction of these faults and the shortening axis (NNW-SSE) is the most important parameter for interpreting the mode of the evolution of thrust folds. Jebel Elkebar is an example of a structure developed on NW-SE-oriented faults that is perpendicular to the shortening axis. Based on the geometry of its folds, Jebel Elkebar is interpreted as a 'Fault Related Fold'. The E-W-oriented Orbata structure is oblique to the direction of the shortening axis and is interpreted through the model 'Fault Propagation Fold' with 'Breakthrough'. The Gafsa Fault, which is parallel to the shortening axis, is a transpressional fault interpreted through the 'Strain Partitioning' mode, which is associated with the oblique ramp fold. The development of various thrust folds requires the presence of a basal decollement level during the Triassic succession. In the Southern-Central Tunisian Atlas, the deformation is variable (geometry of fold closure) and is correlated with the depth of the decollement level; indeed, the intensity of deformation is proportional to the depth of the decollement level. Consequently, the most important deformation is in the higher successions and is a vertical migration of the decollement level associated with thin-skinned deformation.     

Late structural evolution in an accretionary wedge: insights from the Voltri Massif (Ligurian Alps,Italy)

The Voltri Massif underwent a polyphasic tectono-metamorphic evolution that records both the Alpine and part of the Apennine deformation events. So this is a key-area to investigate the relationships between Alpine and Apennine deformation events.

This paper focus on the upper crustal deformations (UCD) that characterize the last stages of the tectonics of the Voltri Massif. In the Voltri Massif UCD are characterized by the superpositions of ductile, brittle-ductile and brittle structures that can be attributed to three main tectonic events (from D3 to D5). The oldest UCD event (D3) developed folds and reverse shear zones under ductile to brittle-ductile conditions. Main compressive NW-SE oriented regime characterized D3 event. Brittle-ductile to brittle reverse shear zones and important strike-slip/transpressive systems overprinted D3 structures. This D4 event was significant at the regional scale and occurred under main transpressive, NE-SW oriented, regime. The latest normal and transtensional brittle structures, that formed during UCD D5 event, locally reactivated the older structures.     

Transverse lineation and large-scale structures related to Alpine obduction in Corsica

In Alpine Corsica, the major tectonic event during the late Cretaceous was the thrusting to the west of an ophiolitic nappe and its sedimentary cover upon the Variscan basement and its Mesozoic cover. A detailed field survey shows that the basal contact of the nappe corresponds to a pluri-kilometric scale shear zone. Thus gneissified basement slices have been tectonically emplaced in the ophiolitic nappe. The thrusting was responsible for small scale structures: foliation, lineation and folds, initiated in a HP/LT metamorphic context. The deformation analysis shows that the finite strain ellipsoid lies in the constriction field close to that for plane strain. Moreover occurrences of rotational criteria in the XZ planes (sigmoidal micas, asymmetric pressure shadows, quartz C-axes fabrics) are in agreement with shear from east to west. All structural data from microscopic to kilometric scales, of which the most widespread is a transverse stretching lineation, can be interpreted by a simple shear model involving ductile synmetamorphic deformation. At the plate tectonic scale the ophiolitic obduction is due to intraoceanic subduction blocked by underthrusting of continental crust beneath oceanic lithosphere.     

Intrafolial folds and associated structures in a progressive strain environment of Darjeeling-Sikkim Himalaya

The Dating rocks and Darjeeling gneisses, which constitute the Sikkim dome in eastern Himalaya, as well as the Gondwana and Buxa rocks of ‘Rangit Window’, disclose strikingly similar sequences of deformation and metamorphism. The structures in all the rocks belong to two generations. The structures of early generation are long-limbed, tight near-isoclinal folds which are often intrafolial and rootless. These intrafolial folds are associated with co-planar tight folds with variably oriented axes and sheath folds with arcuate hinges. Penetrative axial plane cleavage and mineral lineation are related structures; transposition of bedding is remarkable. This early phase of deformation (D ₁) is accompanied by constructive metamorphism. The structures of later generation are open, asymmetrical or polyclinal; a crenulation cleavage or discrete fracture may occur. The structures of early generation are distorted by folds of later generation and recrystallized minerals are cataclastically deformed. Recrystallization is meagre or absent during the later phase of deformation (D ₂). The present discussion is on structures of early generation and strain environment during theD ₁ phase of deformation. The concentration of intrafolial folds in the vicinity of ductile shear zones and decollement or detachment surface (often described as ‘thrust’) may be considered in this context. The rocks of Darjeeling-Sikkim Himalaya display minor structures other than intrafolial folds and variably oriented co-planar folds. The state of finite strain in the rocks, as observed from features like flattened grains and pebbles, ptygmatic folds and boudinaged folds indicate combination of flattening and constrictional type strain. The significance of the intrafolial folds in the same rocks is discussed to probe the environment of strain during progressive deformation (D ₁).     

Tectono-metamorphic evolution of a nappe stack: A case study of the Swiss Alps

Fold-and-thrust belts are prominent structures that occur at the front of compressional orogens. To unravel the tectonic and metamorphic evolution of such complexes, kinematic investigations, quantitative microstructural analysis and geothermometry (calcite–graphite, calcite–dolomite) were performed on carbonate mylonites from thrust faults of the Helvetic nappe stack in Central Switzerland. Paleo-isotherms of peak temperature conditions and cooling stages (fission track) of the nappe pile were reconstructed in a vertical section and linked with the microstructural and kinematic evolution. Mylonitic microstructures suggest that under metamorphic conditions close to peak temperature, strain was highly localized within thrust faults where deformation temperatures spatially continuously increased in both directions, from N to S within each nappe and from top–down in the nappe stack, covering a temperature range of 180–380 °C. Due to the higher metamorphic conditions, thrusting of the lowermost nappe, the Doldenhorn nappe, was accompanied by a much more pronounced nappe internal ductile deformation of carbonaceous rock types than was the case for the overlying Wildhorn- and Gellihorn nappes. Ongoing thrusting brought the Doldenhorn nappe closer to the surface. The associated cooling resulted in a freezing in of the paleo-isotherms of peak metamorphic conditions. Contemporaneous shearing localized in the basal thrust, initially still in the ductile deformation regime and finally as brittle faulting and cataclasis inducing ultimately an inverse metamorphic zonation. With ongoing exhumation and the formation of the Helvetic antiformal nappe stack, a bending of large-scale tectonic structures (thrusts, folds), peak temperature isotherms and cooling isotherms occurred. While this local bending can directly be attributed to active deformation underneath the section investigated up to times of 2–3 ma, a more homogeneous uplift of the entire region is suggested for the very late and still active exhumation stage.     

北京西山水平分层剪切流变构造初探

对比国内外关于变质岩区构造变形序列的实例,可知第一世代的构造变形几乎都以发育不同尺度的强烈扁平化平卧褶皱和有关的轴面流劈理或片理,以及近水平的韧性剪切带等构造组合为特征。北京西山的情况也不例外。这可能代表变质岩区早期构造变形的一种普遍模式,可能是地壳较深构造层次发生大规模透入性水平剪切流变的反映