Moon: ‘ghost’ craters formed during mare filling

This paper discusses formation of pathological cases of crater morphology due to interaction of craters with molten lavas. Terrestrial observations of such a process are discussed. In lunar maria, a number of small impact craters (D < 10 km) may have been covered by thin layers of fluid lavas, or formed in molten lava. Some specific lunar examples are discussed, including unusual shallow rings resembling experimental craters deformed by isostatic filling.Paper dedicated to Professor Harold C. Urey on the occasion of his 80th birthday on 29 April 1973.     

Periodicity and decay of craters over the past 600 myr

The data set of Grieve which provides diameters and ages of craters is analyzed to obtain periodicity of the formation rate and decay constant of craters. It is confirmed that large craters (D 10 km) do not exhibit any periodicity while small ones appear to satisfy the Broadbent criterion for quantum (periodicity) hypothesis at P 29.5 myr. The result is consistent with a recent study of Bailey who showed that large craters are largely due to asteroids. Allowing for the decay of craters, an excess of 4 small craters within the nearest past is detected. In this sense, one may argue that the solar system is now in a moderate comet shower.     

Lava tubes and channels in the lunar Marius Hills

The Marius Hills region, a volcanic plateau in Oceanus Procellarum, contains numerous rilles, rille-like structures, and chains of elongate craters. Most of these structures characteristically: (1) originate on or near irregular shaped craters associated with features previously interpreted as volcanic domes, (2) trend downslope onto Plateau Plains, (3) generally taper in width and become shallower, (4) are often discountinuous, (5) occupy the center, or apparent crest of a broad ridge, (6) may contain cut-off branches and distributary structures, and (7) may have local reversals in longitudinal slope. Structures having these characteristics are interpreted to be lava channels or partly collapsed lava tubes. Terrestrial lava tubes form exclusively, and commonly, in fluid basalt flows. Recent evidence indicates that viscosities of lunar mare basalt lava flows were conducive for lava tube formation.Terrestrial analogs are offered for structures described in the Marius Hills. The analogs are comparable in qualitative and quantitative geomorphic aspects, excluding that of width. Scaling consideration of lunar reduced gravity accounts for increased width of the lunar structures. Linear and curvilinear rilles trending along equal elevations are interpreted to result from fracturing or faulting.     

The rayed crater Zunil and interpretations of small impact craters on Mars

A 10-km diameter crater named Zunil in the Cerberus Plains of Mars created ∼¹⁰⁷ secondary craters 10 to 200 m in diameter. Many of these secondary craters are concentrated in radial streaks that extend up to 1600 km from the primary crater, identical to lunar rays. Most of the larger Zunil secondaries are distinctive in both visible and thermal infrared imaging. MOC images of the secondary craters show sharp rims and bright ejecta and rays, but the craters are shallow and often noncircular, as expected for relatively low-velocity impacts. About 80% of the impact craters superimposed over the youngest surfaces in the Cerberus Plains, such as Athabasca Valles, have the distinctive characteristics of Zunil secondaries. We have not identified any other large (?10 km diameter) impact crater on Mars with such distinctive rays of young secondary craters, so the age of the crater may be less than a few Ma. Zunil formed in the apparently youngest (least cratered) large-scale lava plains on Mars, and may be an excellent example of how spallation of a competent surface layer can produce high-velocity ejecta (Melosh, 1984, Impact ejection, spallation, and the origin of meteorites, Icarus 59, 234-260). It could be the source crater for some of the basaltic shergottites, consistent with their crystallization and ejection ages, composition, and the fact that Zunil produced abundant high-velocity ejecta fragments. A 3D hydrodynamic simulation of the impact event produced 10¹⁰ rock fragments ?10 cm diameter, leading to up to 10⁹ secondary craters ?10 m diameter. Nearly all of the simulated secondary craters larger than 50 m are within 800 km of the impact site but the more abundant smaller (10-50 m) craters extend out to 3500 km. If Zunil is representative of large impact events on Mars, then secondaries should be more abundant than primaries at diameters a factor of ∼1000 smaller than that of the largest primary crater that contributed secondaries. As a result, most small craters on Mars could be secondaries. Depth/diameter ratios of 1300 small craters (10-500 m diameter) in Isidis Planitia and Gusev crater have a mean value of 0.08; the freshest of these craters give a ratio of 0.11, identical to that of fresh secondary craters on the Moon (Pike and Wilhelms, 1978, Secondary-impact craters on the Moon: topographic form and geologic process, Lunar Planet. Sci. IX, 907-909) and significantly less than the value of ∼0.2 or more expected for fresh primary craters of this size range. Several observations suggest that the production functions of Hartmann and Neukum (2001, Cratering chronology and the evolution of Mars, Space Sci. Rev. 96, 165-194) predict too many primary craters smaller than a few hundred meters in diameter. Fewer small, high-velocity impacts may explain why there appears to be little impact regolith over Amazonian terrains. Martian terrains dated by small craters could be older than reported in recent publications.     

Physical constraints on impact melt properties from Lunar Reconnaissance Orbiter Camera images

Impact melt flows exterior to Copernican-age craters are observed in high spatial resolution (0.5 m/pixel) images acquired by the Lunar Reconnaissance Orbiter Camera (LROC) Narrow Angle Camera (NAC). Impact melt is mapped in detail around 15 craters ranging in diameter from 2.4 to 32.5 km. This survey supports previous observations suggesting melt flows often occur at craters whose shape is influenced by topographic variation at the pre-impact site. Impact melt flows are observed around craters as small as 2.4 km in diameter, and preliminary estimates of melt volume suggest melt production at small craters can significantly exceed model predictions. Digital terrain models produced from targeted NAC stereo images are used to examine the three-dimensional properties of flow features and emplacement setting, enabling physical modeling of flow parameters. Qualitative and quantitative observations are consistent with low-viscosity melts heated above their liquidii (superheated) with limited amounts of entrained solids.     

Shallow and deep fresh impact craters in Hesperia Planum,Mars

The depths of 109 impact craters 2–16 km in diameter, located on the ridged plains materials of Hesperia Planum, Mars, have been measured from their shadow lengths using digital Viking Orbiter images (orbit numbers 417S–419S) and the PICS computer software. On the basis of their pristine morphology (very fresh lobate ejecta blankets, well preserved rim crests, and lack of superposed impact craters), 57 of these craters have been selected for detailed analysis of their spatial distribution and geometry. We find that south of 30°S, craters <6.0 km in diameter are markedly shallower than similar-sized craters equatorward of this latitude. No comparable relationship is observed for morphologically fresh craters >6.0 km diameter. We also find that two populations exist for older craters <6.0 km diameter. When craters that lack ejecta blankets are grouped on the basis of depth/diameter ratio, the deeper craters also typically lie equatorward of 30° S. We interpret the spatial variation in crater depth/diameter ratios as most likely due to a poleward increase in volatiles within the top 400 m of the surface at the times these craters were formed.     

Terrestrial analogs to lunar dimple (drainage) craters

In addition to modes of formation offered by previous investigators, terrestrial drainage craters formed over lava tubes in Oregon are presented as analogs to lunar drainage craters. Craters associated with lava tubes result from: (1) drainage of surface material through roof fractures; (2) plastic collapse of the partially cooled lava tube roof; and (3) drainage of surface material into roof collapses. The former two categories result in shallow, often elongate craters; the latter category forms classic dimple shaped craters. Elongate dimple craters formed over volcanic fissures in southern Idaho are also discussed and presented in support of one mode of formation proposed by previous investigators for lunar drainage craters.Movement of surface material toward the orifice is initiated on Earth largely by wind and water; in lunar conditions, initial movement is attributed to micro- and macro-meteoritic bombardment, seismic disturbances generated by internal and external processes, and by thermal creep.Nat. Res. Council Postdoctoral Resident Research Associate.     

Lunar craters evolution and meteoroidal flux in pre-mare and post-mare times

In order to study the geomorphic evolution and lifetimes of lunar craters, data were collected from (i) 32mare andterra provinces of the nearside of the Moon using the L.P.L. catalog; (ii) amare area in Sinus Medii, using direct observations of Lunar Orbiter photos, and (iii) aterra area on the farside using direct observations of Zond-8 photos. The theory presented in a previous publication is expanded and applied to the data.The following conclusions are obtained. (1) Steady-state conditions occur on the studiedmare surfaces for craters of diameter up to approximately 220 m, and on the studiedterra surfaces for craters of diameter up to at least 50 km. (2) The average lifetime of a crater, in addition of being a function of the meteoroidal flux, is a steep function of the diameter of the crater. (3) The correlation is good between a geomorphic classification of craters based on visual comparison with standard craters and a classification of craters based on their depth-diameter ratio, resulting in a coefficient of rank correlation of 0.64. (4) When craters are classified as young, mature, and old, the length of time spent as young is less than a few percent of the total lifetime of the crater; the time spent as mature is 10 to 30%; and as much as 80% is spent as an old crater. Within the error of the calculations, these values are independent of crater diameter and apply to both pre-mare and post-mare craters, indicating that they are also independent of the intensity of the meteoroidal flux. (5) The average lifetime of a 50 km crater in pre-mare times is estimated to be less than 0.3×10⁹ years. (6) The average lifetime of a 50 km crater in post-mare times is estimated to be between 3×10¹¹ and 10¹⁴ years. (7) The average meteoroidal flux in pre-mare times is estimated to be three to six orders of magnitude more intense than in post-mare times.     

Near-infrared imaging in H2 of molecular (CO) outflows from young stars

We have imaged several known molecular (CO) outflows in H₂ v=1-0 S(1) and wide-band K in order to identify the molecular shocks associated with the acceleration of ambient gas by outflows from young stars. We detected H₂ line emission in all the flows we observed: L 1157, VLA 1623, NGC 6334I, NGC 2264G, L 1641N and Haro 4-255. A comparison of the H₂ data with CO outflow maps strongly suggests that prompt entrainment near the head of a collimated jet probably is the dominant mechanism for producing the CO outflows in these sources.     

The Morphology of Small Craters and Knobs on the Surface of Jupiter's Satellite Callisto

Using the images of Callisto's surface acquired at 15-km resolution by the Galileo spacecraft during its C21 orbit, we studied the morphology of craters with diameters of less than 1–2 km and knobs. By analogy with other regions of Callisto that have been studied, these craters and knobs are thought to be formed by the sublimation degradation of the rims of larger craters that are also present in the region under study. The small craters closely resemble similar-sized lunar craters and, by analogy with the latter, are also divided into morphological classes. The depths of 42 craters of different morphological classes are estimated using shadow lengths visible in the craters. The fractions of the craters of different classes in the subpopulation are determined as a function of the crater diameter. Evidence has been obtained that larger craters degrade at a slower rate than smaller ones. The mean thickness of the mantle of dark material (40 m) is estimated from the sizes of the craters ejecting the blocks of the basement ice material. The shape of the knob shadows shows that the knobs are heights of mostly conical form with slopes whose steepness is close to the angle of repose. Analysis has shown that the observed landforms and material units of the region under investigation have been formed during two successive stages of the geologic history of Callisto. Large craters, knobs, and the mantle of dark material were formed mostly at the end of the period of heavy meteorite bombardment. The leading processes of this period are impact cratering, the sublimation of Callisto's crustal ice with the accumulation of residual non-icy material, and downslope mass movement. The next stage, which continues until the present time, involved the formation of the subpopulation of small (<1–2 km) craters. This formation was accompanied by the impact reworking of the upper portion of the dark mantle. The key processes occurring at this stage are impact cratering and downslope mass movement. The mean intensity of resurfacing at this stage is much lower than at the preceding stage.     

Surface features on glass spherules from the Luna 16 sample

Two ellipsoidal spherules approximately 0.5 mm in diameter were studied in detail using a scanning electron microscope. A variety of surface features were observed: vesicles, mounds, dimples, streaks, ridges, grooves, accretion phenomena, and high-speed impact craters. The diameters of 27 glass-lined pits formed by impact on one spherule range from less than 1m to approximately 50m. Intermediate-sized glass-lined pits surrounded by concentric fractures demonstrate the transition between larger craters that have both a pit and a spall zone and generally smaller craters that have only a pit. Assuming all craters showing evidence of impact-related melting or flow are the result of primary impacts, the differential mass spectrum of impacting meteoroids in the range 10^–11 to 10^–10 g is in good agreement with a spectrum based on satellite-borne particle-detecting experiments.     

Physical properties of the outflow sources in taurus

We have searched for CO outflows in eight embedded IRAS sources located in the Taurus molecular cloud using the 45m telescope of Nobeyama Radio Observatory. We have detected CO wing emission in four of these sources. CO outflow associated with TMC1A (04365+2535) is strong and spatially compact (radius 0.04 pc). The dynamical timescale of 2.5 × 10³ yr suggests this outflow is the youngest one in Taurus.We have combined our data with previously published survey data and have analyzed the physical properties of the outflow sources. We found that 12 out of 16 embedded sources ( 75 %) have CO outflows associated with them; this indicates that almost all stars experience a phase of molecular outflow in their embedded stage. The IRAS color of the outflow sources suggests that the outflows appear in considerably early phase of the evolution of YSOs, that is, as early as YSOs became observable with IRAS and that visible outflow sources are in a transient phase of evolution between embedded sources and visible T Tauri stars without outflow. Visible outflow sources are systematically more luminous than visible no-outflow sources, while embedded outflow sources have comparable luminosities with visible no-outflow sources. Such luminosity function suggests that the YSOs with outflow undergo mass accretion and increase their stellar mass as they progress from embedded sources to visible outflow sources. Typical mass accretion rate derived from the bolometric luminosity is 2 ×10^–6 M _yr ^–1. The timescale for mass accretion to acquire typical stellar mass, 0.5 – 0.8M , is 2.5 – 4 × 10⁵ yr.     

Elysium planitia,mars: Regional geology,volcanology, and evidence for volcano-ground ice interactions

Geological mapping of Elysium Planitia has led to the recognition of five major surface units, in addition to the three volcanic constructs Elysium Mons, Hecates Tholus, and Albor Tholus. These units are interpreted to be both volcanic and sedimentary or erosional in origin. The volcano Elysium Mons is seen to have dominated constructional activity within the whole region, erupting lava flows which extend up to 600km from the summit. A major vent system, covering an area in excess of 75 000 km², is identified within the Elysium Fossae area. Forty-one sinuous channels are visible within Elysium Planitia; these channels are thought to be analogous to lunar sinuous rilles and their formation in this region of Mars is attributed to unusually high regional topographic slopes (up to ~ 1.7). Numerous circumferential graben are centered upon Elysium Mons. These graben, located at radial distances of 175, 205–225, and 330km from the summit, evidently post-dated the emplacement of the Elysium Mons lava flows but pre-dated the eruption of extensive flood lavas to the west of the volcano. A great diversity of channel types is observed within Elysium Fossae. The occurrences of streamlined islands and multiple floor-levels within some channels suggests a fluvial origin. Conversely, the sinuosity and enlarged source craters of other channels suggests a volcanic origin. Impact crater morphology, the occurrence of chaotic terrain, probable pyroclastic deposits upon Hecates Tholus and fluvial channels all suggest extensive volcano-ground ice interactions within this area.NASA Summer Intern.     

The impact cratering record of Fennoscandia

The current database of craterform structures in Fennoscandia contains 22 structures of impact origin and about fifty other structures which lack sufficient evidence for impact. The discovery rate of new structures has been one or two per year during the past ten years. The proven impact structures are located in southern Fennoscandia and the majority have been found in Proterozoic target rocks. The age of the structures varies from prehistoric to 1000 Ma and their diameters (D) from 0.04 km to 55 km. Nine of the structures contain impact melt. A characteristic feature of the Fennoscandian impact record is a relatively large number of small ( 5 km) but old (> 200 Ma) structures: this is a result of success of geophysical methods to discover small but old impact structures in an eroded shield covered with relatively thin overburden. Some of the large circular structures in satellite images and/or in geophysical maps may represent deeply eroded scars of very old impacts, but due to the lack of shock metamorphic features, impact-generated rocks or identified ejecta layers, they cannot yet be classified as impact sites. Two huge structures are proposed here as possible impact sites on the basis of circular satellite images and distinct geophysical anomalies: the Lycksele structure in northern Sweden (D ~ 120 km, see also Witschard, 1984) and the Valga structure in Latvia/Estonia (D ~ 180 km). However, endogeneous explanations, like buried granites, basement domings, or fault-bounded blocks are also possible for these structures. Hints, such as distal ejecta layers or impact produced breccia dykes, of an Archaean or Early Proterozoic impact structure have not been found in Fennoscandia so far. New ways of searching for these structures are proposed with particular emphasis on high-resolution integrated geophysical methods. The impact cratering rate in Fennoscandia is ~ 2.0 · 10^–14 km^–2 a^–1 (for craters with D > 3 km) corresponding to about two events per every 100 Ma for the last 700 Ma. Due to erosion, this is a minimal estimate but is higher than the global rate probably due to strong research activity for finding impact structures in Fennoscandia.     

Crater size-shape profiles for the moon and mercury: Terrain effects and interplanetary comparisons

New crater size-shape data were compiled for 221 fresh lunar craters and 152 youthful mercurian craters. Terraces and central peaks develop initially in fresh craters on the Moon in the 0–10 km diameter interval. Above a diameter of 65 km all craters are terraced and have central peaks. Swirl floor texture is most common in craters in the size range 20–30 km, but it occurs less frequently as terraces become a dominant feature of crater interiors. For the Moon there is a correlation between crater shape and geomorphic terrain type. For example, craters on the maria are more complex in terms of central peak and terrace detail at any given crater diameter than are craters in the highlands. These crater data suggest that there are significant differences in substrate and/or target properties between maria and highlands. Size-shape profiles for Mercury show that central peak and terrace onset is in the 10–20 km diameter interval; all craters are terraced at 65 km, and all have central peaks at 45 km. The crater data for Mercury show no clear cut terrain correlation. Comparison of lunar and mercurian data indicates that both central peaks and terraces are more abundant in craters in the diameter range 5–75 km on Mercury. Differences in crater shape between Mercury and the Moon may be due to differences in planetary gravitational acceleration (gMercury=2.3gMoon). Also differences between Mercury and the Moon in target and substrate and in modal impact velocity may contribute to affect crater shape.     

On the rate of ancient meteoroidal flux: Studies of the pre-mare crater population on the Moon

According to radiometric dating of lunar rocks, meteoroidal bombardment and accompanying cratering on the Moon were intensive in the first 0.7×10⁹ y, the so-calledterra stage. Recently the hypothesis of a terminal cataclysm has been gaining acceptance, meaning that a sharp increase in the bombardment followed by a steep decay occurred at the end of theterra stage.The purpose of this paper is to investigate possible variations in the intensity of the bombardment during theterra stage by analyzing the population of large (3–1000 km)terra craters and comparing it with results obtained by theoretical models. The proportion of fresh craters is specifically used.Observational data were obtained by studying the craters on an oldterra surface photographed by Zond 8 and/or covered by LTO and LM maps and by conducting a statistical study of theterra listed in the Lunar and Planetary Laboratory Catalog. Mathematical models were developed in such a way as to make them dimensionless, and as such applicable even without the knowledge of the physical constants and variables involved. Particularly powerful is the method of measuring time as multiples of the average lifetime of a crater of that size.The following conclusions and/or interpretations are reached. (1) A crater remains fresh for less than 20% of the average life of a crater of that size. (2) A condition of equilibrium (i.e., on the average, a new impact does not cause a net increase in the total number of craters) is reached or almost reached on lunarterrae. (3) The age of theterra surface is more than three average lifetimes of the 2 km to at least 20 km size craters (4) The observedterra crater population isnot the result of two cataclysms, one at the beginning of the stage and one at the end. (5) This population, however, could be the result of a constant or slowly decaying flux continuing until the end of the stage, when the terminal cataclysms occurred. This sequence of events cannot be proven or disproven. (6) If no terminal cataclysm occurred, then the meteoroidal flux during theterra stage was slowly decaying or constant. (7) The formation of all the large multi-ringed basins essentially contemporaneously is doubtful.     

On the accretion of the earth and moon

The bodies which produced the premare impact craters on the moon contained a much higher proportion of smaller bodies in the earliest observable times than subsequently. This suggests that the earth and moon accreted from small objects with only an occasional large planetoid.If the earliest observable lunar craters are 4.3 × 10⁹ yr old, the half-life of the primitive planetesimals which produced the giant lunar craters larger than 161 km in diameter, was 143 × 10⁶ yr, while the half-life of the primitive planetesimals which produced lunar craters larger than 1 km in diameter was only 88 × 10⁶ yr. The half-life of the bodies which produced 1 km craters was still shorter, about 75 × 10⁶ yr.     

Earth-based 12.6-cm wavelength radar mapping of the Moon: New views of impact melt distribution and mare physical properties

We present results of a campaign to map much of the Moon’s near side using the 12.6-cm radar transmitter at Arecibo Observatory and receivers at the Green Bank Telescope. These data have a single-look spatial resolution of about 40 m, with final maps averaged to an 80-m, four-look product to reduce image speckle. Focused processing is used to obtain this high spatial resolution over the entire region illuminated by the Arecibo beam. The transmitted signal is circularly polarized, and we receive reflections in both senses of circular polarization; measurements of receiver thermal noise during periods with no lunar echoes allow well-calibrated estimates of the circular polarization ratio (CPR) and the four-element Stokes vector. Radiometric calibration to values of the backscatter coefficient is ongoing. Radar backscatter data for the Moon provide information on regolith dielectric and physical properties, with particular sensitivity to ilmenite content and surface or buried rocks with diameter of about one-tenth the radar wavelength and larger.Average 12.6-cm circular polarization ratio (CPR) values for low- to moderate-TiO₂ mare basalt deposits are similar to those of rough terrestrial lava flows. We attribute these high values to abundant few-centimeter diameter rocks from small impacts and a significant component of subsurface volume scattering. An outflow deposit, inferred to be impact melt, from Glushko crater has CPR values near unity at 12.6-cm and 70-cm wavelengths and thus a very rugged near-surface structure at the decimeter to meter scale. This deposit does not show radar-brightness variations consistent with levees or channels, and appears to nearly overtop a massif, suggesting very rapid emplacement. Deposits of similar morphology and/or radar brightness are noted for craters such as Pythagoras, Rutherfurd, Theophilus, and Aristillus. Images of the north pole show that, despite recording the deposition of Orientale material, Byrd and Peary craters do not have dense patterns of radar-bright ejecta from small craters on their floors. Such patterns in Amundsen crater, near the south pole, were interpreted as diagnostic of abundant impact melt, so the fraction of Orientale-derived melt in the north polar smooth plains, 1000 km farther from the basin center, is inferred to be much lower.     

Fast Solar Wind Velocity in a Polar Coronal Hole during Solar Minimum

We present a study of the outflow velocity of the fast wind in the northern polar coronal hole observed on 21 May 1996, during the minimum of solar activity, in the frame of a joint observing program of the SOHO (Solar Heliospheric Observatory) mission. The outflow velocity is inferred from an analysis of the Doppler dimming of the intensities of the Ovi 1032, 1037 and Hi L 1216 lines observed between 1.5 R and 3.5 R with the Ultraviolet Coronagraph Spectrometer (UVCS), operating onboard SOHO. The analysis shows that for a coronal plasma characterized by low density, as derived for a polar hole at solar minimum by Guhathakurta et al. (1999), and low temperature, as directly measured at the base of this coronal hole by David et al. (1998), the oxygen outflow speed derived spectroscopically is consistent with that implied by the proton flux conservation. The hydrogen outflow is also consistent with flux conservation if the deviation from isotropy of the velocity distribution of the hydrogen atoms is negligible. Hence, for this cool and tenuous corona, the oxygen ions and neutral hydrogen atoms flow outward roughly at the same speed, which increases from 40 km s^–1 at 1.5 R to 360 km s^–1 at 3.1 R , with an average acceleration of the order of 4.5×10³ cm s^–2. The highly anisotropic velocity distributions of the Ovi ions found in the analysis confirm that the process which is heating the oxygen ions acts preferentially across the magnetic field.     

Size-Frequency Distribution of Small Lunar Craters: Widening with Degradation and Crater Lifetime

The review and new measurements are presented for depth/diameter ratio and slope angle evolution during small (D < 1 km) lunar impact craters aging (degradation). Comparative analysis of available data on the areal cratering density and on the crater degradation state for selected craters, dated with returned Apollo samples, in the first approximation confirms Neukum’s chronological model. The uncertainty of crater retention age due to crater degradational widening is estimated. The collected and analyzed data are discussed to be used in the future updating of mechanical models for lunar crater aging.