Neogene tectonic evolution of the Gibraltar Arc: New paleomagnetic constrains from the Betic chain

New paleomagnetic results from Neogene sedimentary sequences from the Betic chain (Spain) are here presented. Sedimentary basins located in different areas were selected in order to obtain paleomagnetic data from structural domains that experienced different tectonic evolution during the Neogene. Whereas no rotations have been evidenced in the Late Tortonian sediments in the Guadalquivir foreland basin, clockwise vertical axis rotations have been measured in sedimentary basins located in the central part of the Betics: the Aquitanian to Messinian sediments in the Alcalà la Real basin and the Tortonian and Messinian sediments in the Granada basin. Moreover, counterclockwise vertical axis rotations, associated to left lateral strike-slip faults have been locally measured from sedimetary basins in the eastern Betics: the Middle Miocene to Lower Pliocene sites from the Lorca and Vera basins and, locally, the Tortonian units of the Huercal-Overa basin. Our results show that, conversely from what was believed up to now, paleomagnetic rotations continued in the Betics after Late Miocene, enhancing the role of vertical axis rotations in the recent tectonic evolution of the Gibraltar Arc.     

Late Miocene to present-day exhumation and uplift of the Internal Zone of the Rif chain: Insights from low temperature thermochronometry and basin analysis

Located on the margin of the west Alboran basin, the Gibraltar Arc (Betic-Rif mountain belt) displays post-Pliocene vertical movements evidenced by uplifted marine sedimentary basins and marine terraces. Quantification of vertical movements is an important clue to understand the origin of present-day relief generation in the Betic-Rif mountain chain together with the causes of the Messinian Salinity Crisis. In this paper, we present the results of a pluridisciplinary study combining an analysis of low temperature thermochronology and Pliocene basins evolution to constrain the exhumation history and surface uplift of internals units of the Rif belt (Northern Morocco). The mean (U-Th)/He apatite ages obtained from 11 samples are comprised between 14.1 and 17.8 Ma and display a wide dispersion, which could be explained by a great variability of apatite chemistries in the analyzed samples. No correlations between altitude and age have been found along altitudinal profile suggesting a rapid exhumation during this period. Thermal modeling using our (U-Th)/He apatite ages and geochronological data previously obtained in the same area (⁴⁰Ar/³⁹Ar and K/Ar data on biotite, zircon and apatite fission track) allow us to propose a cooling history. The rocks suffered a rapid cooling at 60–100 °C/Ma between 22.5 and 19 Ma, then cooled to temperatures around 40 °C between 19 and 18 Ma. They were re-heated at around 110 °C between 18 and 15 Ma then rapidly cooled and exhumed to reach the surface temperature at around 13 Ma. The re-heating could be related to a renewal in thrusting and burying of the inner zones. Between 15 and 13 Ma the cooling resumed at a rate of 50 °C/Ma indicating an exhumation rate of 0.8 mm/y considering an average 40 °C/km geothermal gradient. This exhumation may be linked to the extension in the Alboran Sea. Otherwise biostratigraphic and sedimentological analysis of Pliocene basins of the internal Rif provided informations on the more recent events and vertical movements. Pliocene deposits of the Rifian coast represent the passive infilling of palaeo-rias between 5.33 and 3.8 Ma. The whole coastal area was uplifted at slow average rates (0.01–0.03 mm/y) in relation with a northeastward tilting of 0.2–0.3° since the Lower-Pliocene. A late Pliocene to present extensional tectonics associated to uplift has been identified all along the coastal ranges of the Internal Zone of the Rif chain. This extension was coeval with the major late Pliocene to Pleistocene extensional episode of the Alboran Sea and appears to be still active nowadays. No significant late Messinian uplift was evidenced, thus calling into question the geodynamic models relating the closure of the marine gateways and the MSC to slab roll back.     

Recent Tectonic Structures in a Transect of the Central Betic Cordillera

—The Betic Cordillera has undergone recent Alpine deformations related to the Eurasian-African plate interaction boundary. Most of the present-day relief has been built up since Tortonian times, and is related to the development of folds and faults that are overprinted on older deformations, and some of the faults may be considered as out-of-sequence. The combination of geophysical and geological data makes it possible to determine the main features of the recent tectonic structures, or those recently active, in its central transect. The main fault is a crustal detachment that separates a footwall constituted by the Iberian Massif and a hanging wall formed by the rocks of the Betic Cordillera. While the footwall is practically undeformed, the hanging wall has been folded and faulted. The folds are mainly E-W to NE-SW and have larger sizes and higher related relieves towards the South. The reverse faults are mainly concentrated in the northern mountain front. However, normal faults affect the southern part of the Cordillera and are associated with the development of large asymmetrical basins such as the Granada Depression. In this setting, the slip along the crustal detachment is variable and should increase southwards. The model of the recent tectonics in the central transect of the Cordillera is compatible with the presence of an active subduction in the Alboran Sea, and contrasts notably with the setting of the eastern Betic Cordillera, mainly deformed by transcurrent faults.     

Cosmogenic nuclide burial age of the Sanying Formation and its implications

The Pliocene fluvial/lacustrine sediments of the Sanying Formation lie along the Red River fault and its northwest extension;their majority outcrops appear around Eryuan.The Sanying Formation is characterized by multiple intercalated coal layers and its unconformities contact with the underlying Triassic limestone and the overlying Quaternary coarse sediments.Cosmogenic nuclide burial dating confirms the Pliocene age of the Sanying Formation.The burial ages of the overlying Quaternary sediments provide the lower age limit of the Sanying Formation:2 Ma.Detrital zircon U-Pb age distribution suggests provenance of the Sanying Formation traced to the Songpan-Ganzi flysch belt.From the spatial distribution as well as sedimentary and fault ages,we found a strong connection of the Sanying Formation with the Red River and the Jianchuan faults.We therefore propose that activation of the Red River and the Jianchuan faults during the Late Miocene resulted in subsidence of basins in the extensional areas around Eryuan and in the middle to south segments of the Red River fault.The basins were filled with water carried by the Jinsha River and overflow-lakes formed within the basins where the Sanying Formation was deposited.Most of the lakes were dried and sedimentation of the Sanying Formation ceased due to the uplift of the Yunling Mountains,which forced rerouting of the Jinsha River at the beginning of Quaternary.     

Basin evolution associated to curved thrusts: The Prerif Ridges in the Volubilis area (Rif Cordillera,Morocco)

The Volubilis Basin is located between two structural arcs formed by the Prerif Ridges that developed during and after sedimentation. The arcs correspond with W- to WSW-verging anticline culminations, limited, to the north by a NE-SW strike-slip lateral ramp. Sedimentary infill took place during two stages of ridge formation and propagation. The first stage occurred in the Middle Miocene-early Tortonian and was determined by the deposition of the Nappe Prérifaine in the northern part of the basin, and continental and marine sediments over the Prerif Ridges. The second one, Late Miocene in age (Tortonian–Messinian), corresponds to the sedimentation of calcarenites and bioclastic limestones at the basin edges, with a lateral transition to white and blue marls toward the center of the basin. There is clear evidence of synsedimentary deformation, suggesting the interaction of sedimentation and tectonics. Geophysical data allow us to characterize the stratigraphic architecture of the Volubilis Basin and the geometry of the top of the Paleozoic basement. An approximately N–S Tortonian–Messinian asymmetric depocenter is located close to the front of the eastern arc. This research illustrates the nucleation, progressive thrust bending and segmentation, and the propagation of folds interacting with sedimentation. Thrust nucleation agrees with Paleozoic basement highs under the detachment surface. The progressive development of these tectonic structures conditioned the formation, segmentation and final continentalization of the Volubilis Basin, which can be considered as a piggy-back basin.     

Cenozoic geodynamic evolution of the Andaman–Sumatra subduction margin: Current understanding

The Andaman–Sumatra margin displays a unique set‐up of extensional subduction–accretion complexes, which are the Java Trench, a tectonic (outer arc) prism, a sliver plate, a forearc, oceanic rises, inner‐arc volcanoes, and an extensional back‐arc with active spreading. Existing knowledge is reviewed in this paper, and some new data on the surface and subsurface signatures for operative geotectonics of this margin is analyzed. Subduction‐related deformation along the trench has been operating either continuously or intermittently since the Cretaceous. The oblique subduction has initiated strike–slip motion in the northern Sumatra–Andaman sector, and has formed a sliver plate between the subduction zone and a complex, right‐lateral fault system. The sliver fault, initiated in the Eocene, extended through the outer‐arc ridge offshore from Sumatra, and continued through the Andaman Sea connecting the Sagaing Fault in the north. Dominance of regional plate dynamics over simple subduction‐related accretionary processes led to the development and evolution of sedimentary basins of widely varied tectonic character along this margin. A number of north–south‐trending dismembered ophiolite slices of Cretaceous age, occurring at different structural levels with Eocene trench‐slope sediments, were uplifted and emplaced by a series of east‐dipping thrusts to shape the outer‐arc prism. North–south and east–west strike–slip faults controlled the subsidence, resulting in the development of a forearc basins and record Oligocene to Miocene–Pliocene sedimentation within mixed siliciclastic–carbonate systems. The opening of the Andaman Sea back‐arc occurred in two phases: an early (～11 Ma) stretching and rifting, followed by spreading since 4–5 Ma. The history of inner‐arc volcanic activity in the Andaman region extends to the early Miocene, and since the Miocene arc volcanism has been associated with an evolution from felsic to basaltic composition.     

Mountain Front Development by Folding and Crustal Thickening in the Internal Zone of the Betic Cordillera-Alboran Sea Boundary

The boundary between the Alboran Sea and Betic Cordillera is a good example of a fold related mountain front in the Internal Zone of an alpine mountain range. Since the late Miocene, NNW-SSE convergence between the Eurasian and African plates has produced shortening and related orthogonal extension. To improve the characterisation of the geometry of the deep structure in the region and to establish the recent tectonic evolution of the mountain front, well logs and newly acquired geophysical data (multichannel reflection seismic and gravimetric surveys) have been interpreted and integrated with available surface data. The most marked tectonic structure corresponds to large antiforms and synforms of ENE-WSW trend which are related to mountain ranges and basins, respectively. The fold belt continues toward the northern continental shelf of the Alboran Sea. The fold vergence is generally northwards and its amplitude decreases progressively towards SSE, until disappearring in a sharp boundary where the reflectors are undeformed. The deep geometry suggests that fold growth started during upper Tortonian times and continued its activity up to Pliocene or even Quaternary times. The NNW-SSE compression produces crustal thickening and a regional and progressive southwards emersion. The location of main present-day deformation fronts in the Internal Zones contrasts with classical models where the deformation progresses towards the frontal part of External Zones of cordilleras. In addition, this fold-related deformation mountain front has features different from fault related fronts, as it does not show a sharp boundary, and folds that determine rectilinear mountain boundaries decrease progressively in amplitude or in wavelength up to undeformed areas.     

Geodetic constraints on active tectonics of the Western Mediterranean: Implications for the kinematics and dynamics of the Nubia-Eurasia plate boundary zone

We present GPS observations in Morocco and adjacent areas of Spain from 15 continuous (CGPS) and 31 survey-mode (SGPS) sites extending from the stable part of the Nubian plate to central Spain. We determine a robust velocity field for the W Mediterranean that we use to constrain models for the Iberia-Nubia plate boundary. South of the High Atlas Mountain system, GPS motions are consistent with Nubia plate motions from prior geodetic studies. We constrain shortening in the Atlas system to <1.5 mm/yr, 95% confidence level. North of the Atlas Mountains, the GPS velocities indicate Nubia motion with respect to Eurasia, but also a component of motion normal to the direction of Nubia-Eurasia motion, consisting of southward translation of the Rif Mountains in N Morocco at rates exceeding 5 mm/yr. This southward motion appears to be directly related to Miocene opening of the Alboran Sea. The Betic Mountain system north of the Alboran Sea is characterized by WNW motion with respect to Eurasia at ～1–2 mm/yr, paralleling Nubia-Eurasia relative motion. In addition, sites located in the Betics north of the southerly moving Rif Mountains also indicate a component of southerly motion with respect to Eurasia. We interpret this as indicating that deformation associated with Nubia-Eurasia plate motion extends into the southern Betics, but also that the Betic system may be affected by the same processes that are causing southward motion of the Rif Mountains south of the Alboran Sea. Kinematic modeling indicates that plate boundary geometries that include a boundary through the Straits of Gibraltar are most compatible with the component of motion in the direction of relative plate motion, but that two additional blocks (Alboran-Rif block, Betic Mountain block), independent of both Nubia and Eurasia are needed to account for the motions of the Rif and Betic Mountains normal to the direction of relative plate motion. We speculate that the southward motions of the Alboran-Rif and Betic blocks may be related to mantle flow, possibly induced by southward rollback of the subducted Nubian plate beneath the Alboran Sea and Rif Mountains.     

Local earthquakes seismic tomography in the Betic Cordillera (southern Spain)

A crustal tomographic image, from the surface down to 35 km depth beneath the Betic Cordillera (southern Spain), is obtained using data on local earthquakes recorded at stations from the National and Andalusian Seismic Networks. The velocity structure and the hypocentre locations are derived from the inversion of P first arrival times, using an iterative simultaneous inversion method. The reliability of the results is assessed using different control parameters. The inverted velocity field in the uppermost layers shows a significant lateral variability which reflects most of the large-scale geological features of the Betic Cordillera. Well determined local surface anomalies allow to constrain the location and geometry of the most prominent Neogene sedimentary basins. The upper crust is well resolved throughout the whole region, and is characterized by relatively high velocities in the Internal Betics and in the South Iberian Massif and lower velocities within the External Betics. A relatively well constrained event cluster displays a NNE–SSW trend, and outlines the contact zone between the Internal and the External domains. The middle and lower crustal levels show reliable results beneath the central part of the Betic Cordillera. High averaged velocities are obtained within the South Iberian and the Alboran domains, in contrast to a relatively low velocity anomaly which characterizes the boundary between them. These findings support the hypothesis of the lack of well differentiated crustal levels below the contact zone, while crustal layering is better defined beneath the Alboran and the Iberian domains.     

Quaternary vertical movements of the earth's surface in East-Central Europe

Fluvial terraces in mountain territories and granulometric cycles in fluvial sediment complexes show 300–400 m uplifts in mountain regions and about the same sized subsidences in major East-Central European basins during the Quaternary (−2.4 Ma). The vertical movements are not at all regular and equal in the mountains nor in the great basins. The number of the terraces is different in the valleys and their mutual proportions also differ. Similarly, some local Quaternary basins were developed deeper in the peripheries of the large basins while the central parts are shallow. There are also some stable blocks between the mountains and the lowlands, which did not move essentially during the last two and a half million years.The course and velocity of Pliocene and Quaternary subsidence were proved in a local sub-basin of the Carpathian mountain arch by paleomagnetic measurements of cores from two deep boreholes. In the Körös Basin, filled with fine-grained fluvial sediment, the sedimentation rate was 0.16–0.19 mm/y in the last 700.000 years; 0.15–0.16 mm/y during the proceding one million years; and 0.22–0.28 mm/y during the Pliocene (from −5.2 to −2.4 Ma).In sub-basins filled with coarse-grained sediments, the sedimentation rate was 0.3–0.4 mm/y during the Quaternary.     

The Alpine Rif Belt (Morocco): A Case of Mountain Building in a Subduction-Subduction-Transform Fault Triple Junction

—The Rif belt forms with the Betic Cordilleras an asymmetric arcuate mountain belt (Gibraltar Arc) around the Alboran Sea, at the western tip of the Alpine orogen. The Gibraltar Arc consists of an exotic terrane (Alboran Terrane) thrust over the African and Iberian margins. The Alboran Terrane itself includes stacked nappes which originate from an easterly, Alboran-Kabylias-Peloritani-Calabria (Alkapeca) continental domain, and displays Variscan low-grade and high-grade schists (Ghomarides-Malaguides and Sebtides-Alpujarrides, respectively), shallow water Mesozoic sediments (mainly in the Dorsale Calcaire passive margin units), and infracontinental peridotite slices (Beni Bousera, Ronda). During the Late Cretaceous?-Eocene, the Alboran Terrane was likely located south of a SE-dipping Alpine-Betic subduction (cf. Nevado-Filabride HP-LT metamorphism of central-eastern Betics). An incipient collision against Iberia triggered back-thrust tectonics south of the deformed terrane during the Late Eocene-Oligocene, and the onset of the NW-dipping Apenninic-Maghrebian subduction. The early, HP-LT phase of the Sebtide-Alpujarride metamorphism could be hypothetically referred to the Alpine-Betic subduction, or alternatively to the Apenninic-Maghrebian subduction, depending on the interpretation of the geochronologic data set. Both subduction zones merged during the Early Miocene west of the Alboran Terrane and formed a triple junction with the Azores-Gibraltar transform fault. A westward roll back of the N-trending subduction segment was responsible for the Neogene rifting of the internal Alboran Terrane, and for its coeval, oblique docking onto the African and Iberian margins. Seismic evidence of active E-dipping subduction, and opposite paleomagnetic rotations in the Rif and Betic limbs of the Gibraltar Arc support this structurally-based scenario.     

Main features of the deep structure by local earthquake tomography and active tectonics: case of Rif Mountain (morocco) and Betic Cordillera (Spain)

Within the Spain and Moroccan networks, a large volume of seismic data has been collected and used for investigating the lithosphere in the Betic–Rif Cordillera. The present study has two main goals: (1) Use the most actual seismological data from recent earthquakes in the Betic–Rif arc for investigating the lithosphere through the application of seismic local tomography techniques. (2) Define the possible structural blocks and explain the GPS velocities perturbation in this region. The resolution tests results indicate that the calculated images gave a close true structure for the studied regions from 5- to 60-km depth. The resulting tomographic image shows that the presence of two upper crust body (velocity 6.5 km/s) at 3- to 13-km depth between Iberian Betic and Moroccan Rif in the western and in the middle of Alboran Sea also shows the low velocity favoring the presence of melt in the base of these two bodies. The crustal bodies forms tectonic blocks in the Central Rif and in the Central Betic Cordillera.     

Active faulting offshore SE Spain (Alboran Sea): Implications for earthquake hazard assessment in the Southern Iberian Margin

The southern margin of the Iberian Peninsula hosts the convergent boundary between the European and African Plates. The area is characterised by low to moderate magnitude shallow earthquakes, although large historical events have also occurred. In order to determine the possible sources of these events, we recently acquired swath-bathymetry, TOBI sidescan sonar and high-resolution seismic data on the Almería Margin (Eastern Alboran Sea). The new dataset reveals the offshore continuation of the NE–SW trending Carboneras Fault, a master fault in the Eastern Betic Shear Zone, and its associated structures (N150 and NS faults). These structures are active since they cut the Late Quaternary sedimentary units. The submarine Carboneras Fault zone is 100 km long, 5–10 km wide, and is divided into two N045 and N060 segments separated by an underlapping restraining stepover. Geomorphic features typically found in subaerial strike-slip faults, such as deflected drainage, water gaps, shutter ridges, pressure ridges and “en echelon” folds suggest a strike-slip motion combined with a vertical component along the submarine Carboneras Fault. Considering the NNW–SSE regional shortening axis, a left-lateral movement is deduced for the Carboneras Fault, whereas right-lateral and normal components are suggested for the associated N150 and NS faults, respectively. The offshore portion of this fault is at least twice as long as its onshore portion and together they constitute one of the longest structures in the southeastern Iberian Margin. Despite the fact that present day seismicity in the Almería margin seems to be associated with the N150 to NS faults, the Carboneras Fault is a potential source of large magnitude (M_w ∼7.2) events. Hence, the Carboneras Fault zone could pose a significant earthquake and tsunami hazard to the coasts of Spain and North Africa, and should therefore be considered in any hazard re-evaluation.     

The role of slab detachment processes in the opening of the western–central Mediterranean basins: some geological and geophysical evidence

A review of the geological and geophysical data from the central and western Mediterranean region and the present-day upper mantle structure derived from tomographic studies are utilized in order to define the Oligocene–Recent geodynamic evolution for the area. In line with previous work, we suggest that the Miocene–Quaternary opening of the western and central Mediterranean basins is the result of back-arc extension due to the roll back toward the southeast of a northwestward subducting African slab in a geodynamic setting pinned between the Alpine and Betic collisional zones. We find, however, that this general pattern is complicated by four different detachment events which occurred beneath the Alps (Early Oligocene), the Betic chain (Aquitanian), northern Africa (Langhian) and the Apennines (Late Miocene?–Pliocene). We show that each of these events determines a major tectonic reorganization within the European plate.     

Crustal structure beneath Spain from deep seismic sounding experiments

Major tectonic units of Spain have been investigated by deep seismic sounding experiments since 1974 to determine crustal structures and to delineate their differences. These areas are the central part of the Hercynian Meseta, and the Alpine chains: the Betic Cordillera in the south, including the Balearic promontory and the Alboran Sea, and the Pyrenees in the north.The main features of the crust and the upper mantle along a NNE-SSW cross-section from the Pyrenees to the Alboran Sea are described.The crust under the Meseta is typical of Hercynian areas found elsewhere in Europe, with an average thickness of 31 km, whereas the two Alpine regions are characterized by very large lateral inhomogeneities, such as rapid thickening of the crust to 50 and 40 km under the Pyrenees and the Betics, respectively. The deep-reaching E-W-trending North Pyrenean fault has a throw of 10–15 km at the base of the crust. A P_n velocity of 8.1 km s^?1 is found under the entire Iberian Peninsula.In the Alboran Sea, strongly varying thicknesses of sediments, shallow variable depths to the Moho (～ 13 km under the Alboran ridge), and strong variations of P_n velocity between 7.5 and 8.2 km s^?1 have been found.     

The transition from Alboran to Algerian basins (Western Mediterranean Sea): Chronostratigraphy,deep crustal structure and tectonic evolution at the rear of a narrow slab rollback system

The eastern Alboran basin and its transition to the Algerian basin is a key area in the Mediterranean realm where controversial kinematic and geodynamical models are proposed. Models imply striking differences regarding the nature of the crust, the prevalence of brittle faulting and ductile shear, the origin of magmatism, the style of Miocene deformation and the driving mechanisms of the Alboran plate kinematics. Combining a new chronostratigraphic chart of the Alboran and Algerian basins based on the Habibas (HBB-1) core drill, deep seismic sections striking WSW-ENE and SSE-NNW, and potential field data, we re-assess the tectonic evolution that controlled the sedimentation and basement deformation of the westernmost limit of the Algerian basin and its transition with the Alboran domain. A WSW-directed extensional tectonic phase has shaped a stretched continental crust with typical tilted blocks along ∼100 km from Burdigalian to Tortonian times, which is assumed to result from the WSW-directed migration of the Alboran block driven by a narrow slab rollback. In the Algerian basin, this event was followed by the emplacement of an oceanic-type crust. Potential field signatures of the deep basin as well as geometrical correlations with onland outcrops of inner zones suggest a minimum WSW-directed displacement of the Alboran terrane of ∼200 km. At the southern foot of the Algerian basin, the continent-ocean transition is sharp and may result from the westward propagation of a slab tear at depth, forming two segments of STEP (Subduction-Transform Edge Propagator) margins. Our results support models of intense shear tractions at the base of an overriding plate governed by slab rollback-induced mantle flow. Finally, Messinian salt tectonics affected overlying deposits until today. A late Tortonian to Quaternary dominantly transpressive tectonic episode linked to the Africa-Iberia convergence post-dates previous events, deforming the whole margin.     

The role of strain partitioning on intermontane basin inception and isolation,External Western Gibraltar Arc

The intermontane Ronda Basin, currently located in the Western Betics External Zones, started as an embayment of the Betic foreland basin during the Tortonian. We have characterized a post-Serravallian, basin-related deformation event that overprinted the former fold-and-thrust belt. Updated structural and kinematic maps allow us to identify NW–SE basinward-dipping normal faults at the southwestern and northeastern boundaries of the basin and NE–SW shortening structures (large-scale folds and reverse faults) affecting both the outcropping basement and partially the basin infill. In order to test the possible tectonic activity of these structures during the last 5 Ma, exhaustive geomorphologic analyses in the Ronda Basin area have been done. This included the qualitative study of relief and drainage network, together with the characterization of quantitative indices (SLk, Smf, V_f and HI). These results obtained from this analysis are coherent with structural data and suggest that the identified post-Serravallian structures were active up to at least 5 Ma. We also conclude that the Ronda Basin was generated by along strike segmentation of the relief in the Western Betics induced by NE–SW (arc-parallel) stretching accompanied with NW–SE shortening. In the NW basin boundary, the strain was partitioned into ENE–WSW dextral strike-slip faults and NE–SW shortening structures, which gave rise to a Messinian transpressive structural high that disconnected the former Ronda Basin from its parental foreland basin.     

Early-stage rifting of the Southern Tyrrhenian region: The Calabria–Sardinia breakup

The Southern Tyrrhenian Sea is an extensional basins linked to the Neogene evolution of the Calabria subduction zone located in the western Mediterranean realm where controversial kinematic and geodynamical models have been proposed. Our study provides a key to unravel timing and mode of extension of the upper plate and the breakup of Calabria from Sardinia. By combining original stratigraphic analysis of wells and seismic profiles off Calabria with a stratigraphic correlation to onshore outcrops, we re-assess the tectonic evolution that controlled the sedimentation and basement deformation of the Southern Tyrrhenian basin during Serravallian–Tortonian times. We document the tectono-stratigraphic evolution of adjacent extensional basins characterized by 3rd order depositional sequences (Ser1, Tor1 and Tor2) and different modes of extension, subsidence and opposite dipping faults. Episodic basin development is recorded by a coarsening-up and fining-up trend of the sedimentary succession and by tectonically enhanced unconformities that reflect three episodes of fault activity. We reconstruct Serravallian–Tortonian paleogeographic maps and propose a block faulting model for the evolution of the Sardinia–Calabria area. Sardinia was disconnected from Calabria through N–S normal faults forming Tyrrhenian extensional basins that formed contemporaneously to the E–W opening of the Algerian basin. Unlike published Serravallian–Tortonian reconstructions of the western Mediterranean realm, our results support a geodynamic model characterized by rapid trench retreat, trench-normal extension in the entire overriding plate and very weak coupling between plates.     

An aeromagnetic survey of the southwest of the Western Mediterranean: Description and tectonic implications

We present an aeromagnetic survey performed in the summer of 1973 in the southwestern Mediterranean, over the Alboran Sea and part of the Algéro-Provençal basin; data acquisition and reduction are described and maps of both the total field intensity and anomalies are given. The anomaly map is described in detail and its implications for the tectonic evolution of the two deep basins included in the surveyed area are discussed. We propose that both basins opened simultaneously along a NNW-SSE direction, and that the Alboran basin was later a site of compression, which led to the formation of the Alboran ridge.     

Miocene to Quaternary deformation in NE Slovenia: complex paleomagnetic and structural study

Combined paleomagnetic and structural research was carried out in the Mura-Zala Basin including the western and southern surrounding hills in northeastern Slovenia. The Mura-Zala Basin was formed due to ENE–WSW trending crustal extension in the late Early Miocene (18.3–16.5 Ma). First, marine sedimentation took place in several more or less confined depressions, then in a unified basin. During thermal subsidence in the late Miocene deltaic to fluvial sediments were deposited. After sedimentation, the southernmost, deepest depression was inverted. Map-scale folds, reverse and strike-slip faults were originated by NNW–SSE compression. This deformation occurred in the latest Miocene–Pliocene and is reflected also in the magnetic fabric (low field susceptibility anisotropy). After this folding, the Karpatian sediments of the Haloze acquired magnetization, then suffered 30° counterclockwise rotation relative to the present north (40° counterclockwise with respect to stable Europe). This Pliocene (Quaternary?) rotation affected a wide area around the Mura-Zala Basin. The latest Miocene to Quaternary folding and subsequent rotation may be connected to the counterclockwise rotation of the Adriatic microplate.