2022年门源MS6.9地震震区三维速度与发震机制研究

2022年1月8日,青海省门源县发生M_S6.9地震。使用青海、甘肃等区域数字台网所观测到的2009年1月1日—2022年2月8日间青海门源及周边地区(36°～39°N,101°～104°E)14 869次地震事件的地震观测资料,基于双差成像(TomoDD)方法进行重定位分析,结果表明：门源及周边地区地震震源深度较浅,主要集中在5～15 km深度范围,其中10 km附近分布最多。推断该深度区域为门源及周边地区的主要孕震区。基于地震重定位结果和主震区三维速度结构分别对2016年门源M_S6.4地震和此次地震序列的发震机理进行分析对比,发现两次地震都位于高速异常体边缘,速度结构与断裂、地震序列吻合较好。2022年门源地震位于高速体的西端末梢位置,是该高速体受青藏高原东北缘顺时针应力作用导致的滑动产生的走滑型地震。     

基于Sentinel-1A数据反演漾濞MS6.4地震的同震形变场及断层几何参数

2021年5月21日晚21时48分,云南省大理州漾濞县(震中:25.67°N,99.87°E)发生M_S6.4地震,震源深度8 km。为快速获得此次地震同震形变场及断层几何参数,研究该次地震的发震构造等,文章基于震前、震后的sentinel-1A卫星升降轨SAR数据进行二轨法差分雷达干涉测量(DInSAR),并基于Okada弹性半空间位错模型反演断层几何参数。研究结果如下:(1)此次地震造成的同震形变场长约19 km,宽约20 km;(2)升轨雷达视线向最大形变约为8.2 cm,降轨雷达视线向最大形变约为8.7 cm;(3)地震断层走向为313.7°,倾角为87°,滑动角为175°,为右旋走滑型断层,最大滑动量为0.79 m,反演得出的地震矩为1.48×10~(18) N·m,矩震级为M_W6.1。在川滇块体向南挤出的构造背景下,块体西边界的维西—乔后断裂、红河断裂发生右旋走滑,本次地震便是维西—乔后断裂南段分支断裂右旋走滑活动的体现。     

Earthquake parameters and spatial distribution of coseismic effects in Southern Siberia and Mongolia

In this work we review earthquakes that happened in Southern Siberia and Mongolia within the coordinates of 42°–62° N and 80°–124° E and first propose relationships between earthquake parameters (a surface-wave earthquake magnitude M _s and an epicentral intensity(I ₀) based on the MSK-64 scale) and maximal distances from an earthquake epicenter (R _{e max}), hypocenter (R _{h max}), and a seismogenic fault (R _{f max}) to the localities of secondary coseismic effects. Special attention was paid to the study of these relationships for the effects of soil liquefaction. Hence, it was shown that secondary deformations from an earthquake were distributed in space away from an earthquake epicenter, than from an associating seismogenic fault. The effects of soil liquefaction are manifested by several times closer to a seismogenic fault, than all other effects, regardless of the type of tectonic movement in a seismic focus. Within the 40 km zone from an earthquake epicenter 44% of the known manifestations of liquefaction process occurred; within the 40 km zone from a seismogenic fault—90%. We propose the next relationship for effects of soil liquefaction: M _s = 0.007 × R _{e max} + 5.168 that increases the limits of the maximum epicentral distance at an earthquake magnitude of 5.2 ≤ M _s ≤ 8.1 as compared to the corresponding relationships for different regions of the world.     

含弱渗透性覆盖层饱和砂土地震液化特性研究

针对含弱渗透性覆盖层的饱和砂土地基进行一组离心机振动台试验,并采用OpenSees对试验模型进行数值模拟。通过模型试验与数值模拟结果对比讨论OpenSees对于饱和砂土地基地震液化模拟的精度;采用水平方向的Arias强度表示传入某一位置的地震动强度,并以液化时水平方向Arias强度作为该土层的抗液化强度;采用OpenSees计算不同地震动输入时饱和砂土的反应,以此检验Arias强度作为抗液化强度的准确性。结果表明,引起饱和砂土液化所需要的地震动强度随深度增加而增加;当传入的地震强度达到砂土发生液化所需要的地震强度时,该层砂土将会发生液化。     

Seismicity anomalies before the great earth—quake of Ms=8.1 in the Kunlun Pass and its significance to earthquake prediction

A great earthquake of M _S=8.1 took place in the west of Kunlun Pass on November 14, 2001. The epicenter is located at 36.2°N and 90.9°E. The analysis shows that some main precursory seismic patterns appear before the great earthquake, e.g., seismic gap, seismic band, increased activity, seismicity quiet and swarm activity. The evolution of the seismic patterns before the earthquake of M _S=8.1 exhibits a course very similar to that found for earthquake cases with M _S≥7. The difference is that anomalous seismicity before the earthquake of M _S=8.1 involves in the larger area coverage and higher seismic magnitude. This provides an evidence for recognizing precursor and forecasting of very large earthquake. Finally, we review the rough prediction of the great earthquake and discuss some problems related to the prediction of great earthquakes.     

Ground response analysis of Kanpur soil along Indo-Gangetic Plains

The present work deals with 1D and 2D ground response analysis and liquefaction analysis of alluvial soil deposits from Kanpur region along Indo-Gangetic plains. Standard penetration tests and seismic down hole tests have been conducted at four locations namely IITK, Nankari village, Mandhana and Bithoor at 1.5 m interval up to a depth of 30 m below the ground surface to find the variation of penetration blows and the shear wave velocity along the depth. From the selected sites undisturbed as well as representative soil samples have been collected for detailed soil classification. The soil profiles from four sites have been considered for 1D and 2D ground response analysis by applying the free field motions of three Himalayan earthquakes namely Chamba earthquake (M_w—5.1), Chamoli earthquake (M_w—6.4) and Uttarkashi earthquake (M_w—6.5). An average value of Peak Ground Acceleration (PGA) obtained from 1D and 2D analysis is considered for liquefaction analysis and post-liquefaction settlement. The excess pore water pressure ratio is greater than 0.8 at a depth of 24 m from ground surface for IITK, Nankari village, Bithoor sites. More than 50% of post liquefaction settlement is contributed by layers from 21–30 m for all sites. In general, the soil deposits in Kanpur region have silty sand and sand deposits and are prone to liquefaction hazards due to drastic decrease of cyclic resistance ratio (CRR) at four chosen sites in Kanpur.     

Characterization of rocking shallow foundations using centrifuge model tests

This paper presents new results of centrifuge model tests exploring the behavior of rocking shallow foundations embedded in dry sand, which provides a variety of factors of safety for vertical bearing. The results of slow (quasi‐static) cyclic tests of rocking shear walls and dynamic shaking tests of single‐column rocking bridge models are presented. The moment–rotation and settlement–rotation relationships of rocking footings are investigated. Concrete pads were placed in the ground soil to support some models with the objective of reducing the settlement induced by rocking. The behavior of rocking foundation was shown to be sensitive to the geometric factor of safety with respect to bearing failure, L_f/L_c, where L_f was the footing length, and the L_c was the critical soil‐footing contact length that would be required to support pure axial loading. Settlements were shown to be small if L_f/L_c was reasonably large. Placement of concrete pads under the edges of the footing was shown to be a promising approach to reduce settlements resulting from rocking, if settlements were deemed to be excessive and also had impacts on the energy dissipation and rocking moment capacity. A general discussion of the tradeoffs between energy dissipation and re‐centering of rocking foundations and other devices is included. Copyright © 2011 John Wiley & Sons, Ltd.     

Source parameters of bohai earthquake, July 18, 1969 and yongshan earthquake, May 11, 1974 determined by synthetic seismograms of teleseismic P waves

The source parameters of the Bohai Sea earthquake, July 18, 1969 and Yongshan, Yunnan earthquake, May 11, 1974 were determined by full — wave theory synthetic seismograms of teleseismic P waves. P+pP+sP wereform were calculated with WKBJ approximation and real integral paths. One — dimensional unilateral, finite propagation source was also considered. By trail — and — error in comparing the theoretical seismograms with the observational ones of WWSSN stations, the source parameters were obtained as follow: for Bohai earthquake, φ=195°, δ=85°, λ=65°,M _o=0.9×10¹⁹Nm,L=59.9km.V _R=3.5km/s, ∧ _R =160°; for Yongshan earthquake, φ=240°, δ=80°, ∧=150°,M _o=1.3×10¹⁸Nm,L=48.8km,V _R=3km/s, ∧ _R =−10°, where φ is strike, δ dip angle, λ slip angle,M _o seismic moment,L rupture length,V _R rupture propagation speed. As III type fractures the faulting propagated along the fault planes, and ∧ _R is the angle from the strike to the propagation direction. Yongshan earthquake showed complexity in its focal process, having four sub—ruptures during the first 60 seconds. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 1–8, 1991.     

Evidence for Quaternary liquefaction-induced features in the epicentral area of the 21 May 2003 Zemmouri earthquake (Algeria, M w = 6.8)

Evidence of ancient liquefaction-in duced features is presented in the area of the 2003 Zemmouri earthquake (M _w 6.8). This earthquake was related to an offshore unknown 50-km long fault. A 0.55-m coseismic coastal uplift was generated and extensive liquefaction has been induced in the most susceptible area which correspond to the seaside and along the hydrographic network, mainly the Sebaou and Isser valley rivers. Field investigations allowed us to identify past liquefaction traces in the Quaternary deposits. The observed features are represented by sand dikes, sills, and sand vents as well as well-preserved sand boiled volcanoes. In this work, we also describe the alluvial environment, the hosted localized stratigraphic layer, the morphology and the geometry of the observed features, as well as the observed deformation (settlement) of the hosted layers that are among characteristics of the seismically induced features as described in worldwide examples. Our observations represent a step towards paleoseismological studies in the region knowing that the May 21st 2003 Zemmouri earthquake is produced by an offshore fault where a direct study of the seismogenic fault is inaccessible.     

Assessing CPT-based methods for liquefaction evaluation with emphasis on the cases from the Chi-Chi, Taiwan, earthquake

In the early morning (1:47 Taiwan time) of September 21, 1999, the largest earthquake of the century in Taiwan (M_w=7.6, M_L=7.3) struck this island country. The earthquake killed more than 2400 people and caused great destruction to buildings, bridges, dams, highways, and railways. One of the causes for heavy damages to the structures is soil liquefaction and ground settlement during the earthquake. In this paper, investigation of soil liquefaction and case histories of liquefaction are presented. Three CPT-based simplified methods, the Robertson method, the Olsen method, and the Juang method, are examined using the case histories derived from the Chi-Chi earthquake. The results of the comparison show that the Juang method is more accurate than the two methods in predicting liquefaction potential of soils based on the cases derived from the Chi-Chi earthquake, although all three methods are quite comparable in accuracy.     

Precise determination of focal parameters for July 20, 1995 M_L=4.1 earthquake sequence in the Huailai basin

IntroductionSince the late 1970s, the quickly developed global digital seismograph network has been providing high quality recordings of large earthquakes in global scale, based on which digital seismology has made great progress. Compared with large earthquakes, moderate and small sized shocks have more frequent occurrence, and comprise clues to geological tectonics and tectonic stress field in a region. Preceding and following a large earthquake, usually occur numbers of small events that im…     

A discussion on the amplitude ratios of PP and P waves for earthquakes with different focal mechanisms

Using the WKBJ approximation method we calculate the synthetic teleseismograms of P and PP waves to match the observed ones of six large Chinese earthquakes with known focal mechanisms: Tibet earthquake of July 14, 1973; Haicheng earthquake of February 4, 1975; Songpan earthquakes of August 16, 1976, August 21, 1976 and August 23, 1976 and Nignhe earthquake of November 15, 1976. The focal mechanism of the Tibet earthquake is discussed to examine the technique used in the calculation. We note that the amplitude ratios of PP and P waves (A _PP/A _P) have different characteristics for dip—slip events and strike—slip events within certain epicentral distances. We calculate the synthetic teleseismograms of P and PP waves for the strike—slip and dip—slip events with fault angles of 330°, 240° and 0°, focal depths of 8 km, 17 km and 24 km, at the assumed station with an azimuth of 310° and epicentral distances from 40°; to 80°. The diagrams of maximum amplitude ratios of PP and P waves (A _PP/A _P) versus distances are given. The possibility to use the (A _PP/A _P) values to give an approximate estimation for the focal mechanism type is discussed. This work may be useful for determining the focal mechanism type for those earthquakes which have only few records such as the Chinese earthquakes from the 1930s to 1960s. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 150–160, 1991.     

2021年青海玛多MS7.4地震精定位和发震构造初探

2021年5月22日青海省果洛州玛多县发生M_S7.4地震。为探究本次地震的发震构造及余震分布特征,选取2021年5月1日—6月3日青海测震台网观测到的33°～36°N,97°～99.5°E空间范围内的地震观测报告,利用双差精定位方法进行双差精定位处理。重定位后整体残差平均减小了0.23,深度在5～25 km间随机分布。根据地震迁移方向和震区地质构造,认为本次地震的发震构造为昆仑山口—江错断裂,玛多—甘德东段受主震触发影响爆发一系列小震,两条断裂之间可能因为本次地震产生一定联系。本次地震产生新的断裂,突破了两条断裂之前的空区,连接到玛多—甘德断层,使两条断层交叉相连,形成新的断层构造。     

关于2次江西早期中强地震的甄别与复核

按照最大化利用有限地震资料的研究思路,充分发掘可利用信息,综合文史记载、人文历史、地震研究成果等资料,对2次江西早期中强地震进行甄别和参数复核,得到结果如下:304年吉水-永丰间地震的震中约为27.3°N、115.2°E,震级5.0级左右; 455年余干地震的震中约为28.7°N、116.7°E,震级5?级左右。该结果可为江西早期地震研究和潜在震源区划分提供新的资料。     

Relocation of the 1998 Zhangbei-Shangyi earthquake sequence using the double difference earthquake location algorithm

Introduction On January 10, 1998, at 11h50min Beijing Time (03h50min UTC), an earthquake of ML=6.2 occurred in the border region between the Zhangbei County and Shangyi County of Hebei Province. In total 87 events with ML3.0 were recorded by Beijing Telemetry Seismic Network (BTSN) before March of 1999. Before relocation the preliminary hypocenters determined by BTSN showed an epicentral distribution of 25 km long and 25 km wide without any predominate orientation. The epicentral a…     

Statistical testing of the relation between burst of aftershocks and strong earthquakes

According to geological tectonics and seismic activites this paper devided North China (30°–45°N, 105°–130°E) into four areas. We analyzed the North China earthquake catalogue from 1970 to 1986 (from 1965 to 1986 for Huabei, the North China, plain region) and identified forty-two bursts of aftershock. Seven of them occurred in aftershock regions of strong earthquakes and seventeen of them in the seismic swarm regions. The relation between strong earthquakes with the remaining eighteen bursts of aftershocks has been studied and tested statistically in this paper. The result of statistical testing show that the random probabilityp of coincidence of bursts of aftershock with subsequent strong earthquakes is less than six percent. By Xu’sR scoring method the efficacy of predicting strong earthquake from bursts of aftershock is estimated greater than 39 percent. Following the method proposed in the paper we analyzed the earthquake catalogue of China from 1987 to June, 1988. The results show that there was only one burst of aftershock occurred on Jan. 6, 1988 withM=3.6 in Xiuyan of Northeast China. It implicates that a potential earthquake withM _S⩽5 might occur in one year afterwards in the region of Northeast China. Actually on Feb. 25, 1988 an earthquake withM _S=5.3 occurred in Zhangwu of Northeast China. Another example is Datong-Yanggao shock on October 18, 1989 which is a burst of aftershock. Three hours after an expected shock withM =6.1 took place in the same area. Two examples above have been tested in practical prediction and this shows that bursts of aftershocks are significant in predicting strong earthquakes. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 273–280, 1991. Part of earthquake catalogue is from Jinbiao Chen, Peiyan Chen and Quanlin Li.     

Rupture process of the M L=4.1 earthquake in Huailai Basin on July 20, 1995

On July 20, 1995, an earthquake of M _L=4.1 occurred in Huailai basin, northwest of Beijing, with epicenter coordinates 40.326°N, 115.448°E and focal depth 5.5 km. Following the main shock, seismicity sharply increased in the basin. This earthquake sequence was recorded by Sino-European Cooperative Huailai Digital Seismograph Network (HDSN) and the hypocentres were precisely located. About 2 hours after the occurrence of the main shock, a smaller event of M _L=2.0 took place at 40.323°N, 115.447°E with a focal depth of 5.0 km, which is very close to the main shock. Using the M _L=2.0 earthquake as an empirical Green’s function, a regularization method was applied to retrieve the far-field source-time function (STF) of the main shock. Considering the records of HDSN are the type of velocity, to depress high frequency noise, we removed instrument response from the records of the two events, then integrated them to get displacement seismogram before applying the regularization method. From the 5 field stations, P phases in vertical direction which mostly are about 0.5 s in length were used. The STFs obtained from each seismic phases are in good agreement, showing that the M _L=4.1 earthquake consisted of two events. STFs from each station demonstrate an obvious “seismic Doppler effect”. Assuming the nodal plane striking 37° and dipping 40°, determined by using P wave first motion data and aftershock distribution, is the fault plane, through a trial and error method, the following results were drawn: Both of the events lasted about 0.1 s, the rupture length of the first one is 0.5 km, longer than the second one which is 0.3 km, and the rupture velocity of the first event is 5.0 km/s, larger than that of the second one which is about 3.0 km/s; the second event took place 0.06 s later than the first one; on the fault plane, the first event ruptured in the direction γ=140° measured clockwise from the strike of the fault, while the second event ruptured at γ=80°, the initial point of the second one locates at γ=−100° and 0.52 km from the beginning point of the first one. Using far-field ground displacement spectrum measurement method, the following source parameters about the M _L=4.1 earthquake were also reached: the scalar earthquake moment is 3.3×10¹³ N·m, stress drop 4.6 MPa, rupture radius 0.16 km. Contribution No. 99FE2022, Institute of Geophysics, China Seismological Bureau. This study is supported by the Chinese Joint Seismological Science Foundation (95-07-411).     

Structural analysis and interpretation of the surface deformation associated with the Ning’er, Yunnan Province, China M S6.4 earthquake of June 3, 2007

The seismogenic fault and the dynamic mechanism of the Ning’er, Yunnan Province MS6.4 earthquake of June 3, 2007 are studied on the basis of the observation data of the surface fissures, sand blow and water eruption, land-slide and collapse associated with the earthquake, incorporating with the data of geologic structures, focal mecha-nism solutions and aftershock distribution for the earthquake area. The observation of the surface fissures reveals that the Banhai segment of the NW-trending Ning’er fault is dominated by right-lateral strike-slip, while the NNE-trending fault is dominated by left-lateral strike-slip. The seismo-geologic hazards are concentrated mainly within a 330°-extending zone of 13.5 km in length and 4 km in width. The major axis of the isoseismal is also oriented in 330° direction, and the major axis of the seismic intensity VIII area is 13.5 km long. The focal mechanism solutions indicate that the NW-trending nodal plane of the Ning’er MS6.4 earthquake is dominated by right-lateral slip, while the NE-trending nodal plane is dominated by left-lateral slip. The preferred distribution orientation of the aftershocks of MS≥2 is 330°, and the focal depths are within the range of 3~12 km, predominantly within 3~10 km. The distribution of the aftershocks is consistent with the distribution zone of the seismo-geologic hazards. All the above-mentioned data indicate that the Banhai segment of the Ning’er fault is the seismogenic fault of this earthquake. Moreover, the driving force of the Ning’er earthquake is discussed in the light of the active block theory. It is believed that the northward pushing of the Indian plate has caused the eastward slipping of the Qinghai-Tibetan Plateau, which has been transformed into the southeastern-southernward squeezing of the southwest Yunnan region. As a result, the NW-trending faults in the vicinity of the Ning’er area are dominated by right-lateral strike-slip, while the NE-trending faults are dominated by left-lateral strike-slip. This tectonic     

Review of the source characteristics of the Great Sumatra–Andaman Islands earthquake of 2004

The December 26, 2004 Sumatra–Andaman Island earthquake, which ruptured the Sunda Trench subduction zone, is one of the three largest earthquakes to occur since global monitoring began in the 1890s. Its seismic moment was M ₀ = 1.00 × 10²³–1.15 × 10²³ Nm, corresponding to a moment-magnitude of M _w = 9.3. The rupture propagated from south to north, with the southerly part of fault rupturing at a speed of 2.8 km/s. Rupture propagation appears to have slowed in the northern section, possibly to ∼2.1 km/s, although published estimates have considerable scatter. The average slip is ∼5 m along a shallowly dipping (8°), N31°W striking thrust fault. The majority of slip and moment release appears to have been concentrated in the southern part of the rupture zone, where slip locally exceeded 30 m. Stress loading from this earthquake caused the section of the plate boundary immediately to the south to rupture in a second, somewhat smaller earthquake. This second earthquake occurred on March 28, 2005 and had a moment-magnitude of M _w = 8.5.     

The effect of plastic fines on the pore pressure generation characteristics of saturated sands

Pore water pressure generation during earthquake shaking initiates liquefaction and affects the shear strength, shear stiffness, deformation, and settlement characteristics of soil deposits. The effect of plastic fines (kaolinite) on pore pressure generation in saturated sands was studied through strain-controlled cyclic triaxial tests. In addition to pore pressure generation, this experimental study also focused on evaluating the threshold shear strain for pore pressure generation and the volumetric compressibility of specimens during pore pressure dissipation. The results reveal that specimens having up to 20% plastic fines content generated larger values of pore water pressure than clean sand specimens. At 30% fines content, the excess pore water pressure decreased below that of clean sand. The threshold shear strain, which indicates the strain level above which pore pressures begin to generate, was assessed for different kaolinite–sand mixtures. The threshold shear strain was similar for 0–20% fines (γ_t0.006–0.008%), but increased to about 0.025% for 30% fines. The volumetric compressibility, measured after pore pressure generation, was similar for all specimens. The transition of behavior at fines contents between 20% and 30% can be attributed to a change in the soil structure from one dominated by sand grains to one dominated by fines.