Changes in the early part of the seismic coda due to localized scatterers: The estimation ofQ in a stope environment

A single scattering model was used to analyse the temporary changes in the mean density of scattered waves in a discrete random medium. The model of the mean energy density, originally proposed bySato (1977) for spherical radiation and isotropic scattering, has been modified and applied to a medium in which the scatterers are confined to a specified volume. The time variation of the early part of the mean energy density function for the different source durations was investigated. The dominant effect on the theoretical mean energy density is caused by the specified volume containing scatterers. The duration of the source pulse influences the early part of the coda fort/t ₀<1.2, wheret is the lapse time measured from the source origin time, andt ₀is arrival time of the body wave.The analysis of the coda signal of micro-events occurring immediately in front of the face enables us to estimate the size of the fracture zone induced by the stope. The model of the mean energy density of coda for a medium containing scatterers close to the seismic source was used to analyse a large number of events recorded close to an advancing mine face in a deep level gold mine in South Africa. The coda decay rate has two trends: the first, with a steep decay of coda, is produced by a larger deviation of rock parameters and/or larger size of the scatterers; the second trend, which decays more slowly, has the corresponding mean-free path ranging from 20 m to 200 m. The analysis indicates that the rock mass about 15–20 m from the stope contains a large proportion of fractured and blocked rock, which is the source of scattering. The scattering of theS-wave was much stronger and more stable, with the mean-free path varying from 11 m to 45 m. This is due to the shorter wavelength of theS wave in comparison with theP wave. The quality factor for theP coda wave varies from 30 to 100 in the fracture zone of stope and outside this zone it has a value of 300. The quality factor of theS wave varies from 20 to 78 in the equivalent volume. For rock surrounding the stope the ratioQ _sp ^–1 /Q _ss ^–1 varied from 0.31 to 0.69. This suggests that the radii of scatterers are smaller than 3.5 m.     

Seismicity induced by gas production: II. Lithology correlated events,induced stresses and deformation

A 3D relocation technique permits precise locations of induced earthquakes. Geostatistical processing using the data of 87 boreholes provides the basis of a precise 3D structure, with a dome geometry. Conventional laboratory mechanical tests performed on deep rock samples (1000 m to 5000 m) define the rock properties at depths similar to those of the seismic events (1<M _L<4.2) that range from 1 to 7 km.In the studied period, most (85%), of the events were located above the gas reservoir, with very few located in the reservoir itself. Because the production parameters (50 MPa depletion of the gas pressure reservoir) are homogeneous throughout the gas field, the lateral inhomogeneity of the seismic rupture locations are a consequence of variations in the rheological response of the dome to the deformation induced by gas production.Here a ratio of two is found between the elastic modulus of the seismic rock matrix and the elastic modulus of the aseismic rock matrix. The contrast in strength is at least as great, if not greater. Repeated measured surface deformations involve the whole structure. Spatial and temporal deformations indicate that aseismic deformation is quantitatively the main process of this structural deformation. The heterogeneous stress pattern inferred fromP-axes of induced earthquakes disagrees with the tectonic regional stress field. The radial distribution ofP-axes towards the gas reservoir probably reflects the production induced deformation. The inferred deformation of the dome occurs in response to weak induced stresses.     

Source parameters of the earthquakes of the Baikal rift system

The dynamic parameters of the earthquake source—the seismic moment, the moment magnitude, the source radius, the stress drop, and the amplitude of displacement—are determined by the amplitude Fourier spectra of the body shear waves (S-waves) for 62 earthquakes of the Baikal rift system with the energy class of K _P = 9.1–15.7. In the calculations I used the classical Brune model. The seismic moment of the earthquakes being investigated changes from 3.65 × 10¹¹ N m to 1.35 × 10¹⁸ N m, and the radii of earthquake sources vary from 390 m to 1.84 km. The values of the drop in stress Δσ grow with an increase in the seismic moment up to 1.7 × 10⁸ Pa. For the group of weak earthquakes (M _w = 1.7–3.3), extremely low values of the drop in stress 10³–10⁴ Pa are observed. The maximum amplitude of displacement in the source amounts to 5.95 m. The empirical equations between the seismic moment and the other dynamic parameters of the source are determined. The regional dependence of the seismic moment and energy class is obtained: log M ₀ ± 0.60 = 1.03K _P + 3.17. The character of the relationship between the seismic moment and the corner frequency indicates that the classical scaling law of the seismic spectrum for the earthquakes in question is not fulfilled. The obtained estimates of the dynamic parameters are in satisfactory agreement with the published data concerning the analogous parameters of the other rift zones, which reflects the general regular patterns of the destruction of the lithosphere and the seismicity in the extension zones of the lithosphere.     

Characteristics of ambient stress values for micro－earthquake sequences in Western Yunnan Earthquake Prediction Experimental Field

Ｃｈａｒａｃｔｅｒｉｓｔｉｃｓｏｆａｍｂｉｅｎｔｓｔｒｅｓｓｖａｌｕｅｓｆｏｒｍｉｃｒｏ－ｅａｒｔｈｑｕａｋｅｓｅｑｕｅｎｃｅｓｉｎＷｅｓｔｅｒｎＹｕｎｎａｎ　Ｅａｒｔｈｑｕａｋｅ　Ｐｒｅｄｉｃｔｉｏｎ　Ｅｘｐｅｒｉｍｅｎｔａｌ　ＦｉｅｌｄＪｉａ－Ｚ...     

Estimation of seismic stress drop from the peak velocity of ground motion

ＥｓｔｉｍａｔｉｏｎｏｆｓｅｉｓｍｉｃｓｔｒｅｓｄｒｏｐｆｒｏｍｔｈｅｐｅａｋｖｅｌｏｃｉｔｙｏｆｇｒｏｕｎｄｍｏｔｉｏｎＪＩＡＺＨＥＮＧＱＩＮ（秦嘉政）ＺＵＹＩＮＬＩＵ（刘祖荫）ＸＩＡＯＤＯＮＧＱＩＡＮ（钱晓东）ＱＩＮＧＹＩＮＸＩＥ（谢庆...     

新10井水位对九寨沟M_S7.0、精河M_S6.6地震同震响应

基于新10井水位对九寨沟M_S7.0、精河M_S6.6地震的同震响应特征,分别利用水震波和潮汐分析法,反演得到了新10井水位在地震波作用期间和地震波作用前后含水层参数特征,探讨了2次地震引起的新10井同震响应变化机理。结果表明,新10井水位对九寨沟地震和精河地震具有不同的同震响应形态,利用水平流模型反演所得的新10井含水层渗透系数,在九寨沟地震时为61m/d,而在精河地震时为147m/d,表明地震波作用导致水平向的渗透性增强;利用垂向流模型反演得到的新10井含水层渗透系数,在2次地震之前约为49×10~(-5)m/d,而在地震之后约为18×10~(-5)m/d,表明地震波作用导致垂直向的渗透性减弱。因此,新10井水位的同震响应变化与地震波引起的含水层渗透率的改变有关。     

Fracturing and hydrothermal alteration in normal fault zones

Large normal fault zones are characterized by intense fracturing and hydrothermal alteration. Displacement is localized in a slip zone of cataclasite, breccia and phyllonite surrounding corrugated and striated fault surfaces. Slip zone rock grades into fractured, but less comminuted and hydrothermally altered rock in the transition zone, which in turn grades abruptly into the wall rock. Fracturing and fluid flow is episodic, because permeability generated during earthquakes is destroyed by hydrothermal processes during the time between earthquakes.Fracture networks are described by a fracture fabric tensor (F). The permeability tensor (k) is used to estimate fluid transport properties if the trace of F is sufficiently large. Variations in elastic moduli and seismic velocities between fault zone and wall rock are estimated as a function of fracture density (). Fracturing decreases elastic moduli in the transition zone by 50–100% relative to the country rock, and similar or even greater changes presumably occur in the slip zone.P-andS-wave velocity decrease, andV _p /V _s increases in the fault zone relative to the wall rock. Fracture permeability is highly variable, ranging between 10^–13 m² and 10^–19 m² at depths near 10 km. Changes in permeability arise from variations in effective stress and fracture sealing and healing.Hydrothermal alteration of quartzo-feldspathic rock atT>300°C creates mica, chlorite, epidote and alters the quartz content. Alteration changes elastic moduli, but the changes are much less than those caused by fracturing.P-andS-wave velocities also decrease in the hydrothermally altered fault rock relative to the country rock, and there is a slight decrease inV _p /V _s , which partially offsets the increase inV _p /V _s caused by fracturing.Fracturing and hydrothermal alteration affect fault mechanics. Low modulus rock surrounding fault surfaces increases the probability of exceeding the critical slip distance required for the onset of unstable slip during rupture initiation. Boundaries between low modulus fault rock and higher modulus wall rock also act as rupture guides and enhance rupture acceleration to dynamic velocity. Hydrothermal alteration at temperatures in excess of 300°C weakens the deeper parts of the fault zone by producingphyllitic mineral assemblages. Sealing of fracture in time periods between large earthquakes generates pods of abnormally pressured fluid which may play a fundamental role in the initiation of large earthquakes.     

Radioactive heat production in rocks and its relation to other petrophysical parameters

Summary Radioactive heat productionA is a scalar and isotropic petrophysical property independent of in situ temperature and pressure. Its value is usually expressed in HGU units (1 HGU=10^–13 cal/cm³ sec) and depends on the amounts of uranium, thorium and potassium.A varies with rock type over several orders of magnitude and reflects the geochemical conditions during rock formation (magmatic differentiation, sedimentation or metamorphism).In order to assign realistic thermal parameters to deeper-seated rocks correlations with seismic velocity (which can be determined from the surface) have been looked for. In the range characteristic for crystalline rocks of the crust (5–8 km/sec)A is strongly correlated with density and compressional wave velocityv _p:A decreases with increasingv _p orp. From this relationship it is now possible to estimate heat production values for any particular layer of a crustal section from measured seismic velocities. Contrary to earlier belief there is, as shown by experimental determinations, no correlation between heat productionA and thermal conductivityK in igneous and metamorphic rocks. In sediments however, especially in sand/shale sequences, a correlation betweenK andA is most likely: increasing clay mineral content, characterized by increasingA, causes the decrease ofK in these rocks.Contribution No. 111, Institute of Geophysics, Swiss Federal Institute of Technology, Zurich, Switzerland.     

Probabilistic seismic hazard assessment of Switzerland: best estimates and uncertainties

We present the results of a new genera tion of probabilistic seismic hazard assessment for Switzerland. This study replaces the previous intensity-based generation of national hazard maps of 1978. Based on a revised moment-magnitude earthquake catalog for Switzerland and the surrounding regions, covering the period 1300–2003, sets of recurrence parameters (a and b values, M _max ) are estimated. Information on active faulting in Switzerland is too sparse to be used as source model. We develop instead two models of areal sources. The first oriented towards capturing historical and instrumental seismicity, the second guided largely by tectonic principles and express ing the alterative view that seismicity is less stationary and thus future activity may occur in previously quiet regions. To estimate three alterna tive a and b value sets and their relative weighting, we introduce a novel approach based on the modified Akaike information criterion, which allows us to decide when the data in a zone deserves to be fitted with a zone-specific b value. From these input parameters, we simulate synthetic earthquake catalogs of one-million-year duration down to magnitude 4.0, which also reflect the difference in depth distribution between the Alpine Foreland and the Alps. Using a specific predictive spectral ground motion model for Switzerland, we estimate expected ground motions in units of the 5% damped acceleration response spectrum at frequencies of 0.5–10 Hz for all of Switzerland, referenced to rock sites with an estimated shear wave velocity of 1,500 m/s² in the upper 30 m. The highest hazard is found in the Wallis, in the Basel region, in Graubünden and along the Alpine front, with maximum spectral accelerations at 5 Hz frequency reaching 150 cm/s² for a return period of 475 years and 720 cm/s² for 10,000 years. Electronic supplementary material The online version of this article (doi: ) contains supplementary material, which is available to authorized users.     

Anisotropic P-wave attenuation measured from a multi-azimuth surface seismic reflection survey

A system of aligned vertical fractures produces azimuthal variations in stacking velocity and amplitude variation with offset, characteristics often reported in seismic reflection data for hydrocarbon exploration. Studies of associated attenuation anisotropy have been mostly theoretical, laboratory or vertical seismic profiling based. We used an 11 common‐midpoint‐long portion of each of four marine surface‐seismic reflection profiles, intersecting each other at 45° within circa 100 m of a common location, to measure the azimuthal variation of effective attenuation, Q⁻¹_eff and stacking velocity, in a shallow interval, about 100 m thick, in which consistently orientated vertical fracturing was expected due to an underlying salt diapirism. We found qualitative and quantitative consistency between the azimuthal variation in the attenuation and stacking velocity, and published amplitude variation with offset results. The 135° azimuth line showed the least apparent attenuation (1000 Q⁻¹_eff= 16 ± 7) and the fastest stacking velocity, hence we infer it to be closest to the fracture trend: the orthogonal 45° line showed the most apparent attenuation (1000Q⁻¹_eff= 52 ± 15) and slowest stacking velocity. The variation of Q⁻¹_eff with azimuth φ is well fitted by 1000Q⁻¹_eff = 34 − 18cos[2(φ+40°)] giving a fracture direction of 140 ± 23° (±1SD, derived from ‘bootstrapping’ fits to all 11⁴ combinations of individual common‐midpoint/azimuth measurements), compared to 134 ± 47° from published amplitude variation with offset data. The effects of short‐window spectral estimation and choices of spectral ratio bandwidth and offset ranges used in attenuation analysis, individually give uncertainties of up to ±13° in fracture direction. This magnitude of azimuthal variation can be produced by credible crack geometries (e.g., dry cracks, radius 6.5 m, aspect ratio 3 × 10⁻⁵, crack density 0.2) but we do not claim these to be the actual properties of the interval studied, because of the lack of well control (and its consequences for the choice of theoretical model and host rock physical properties) and the small number of azimuths available here.     

Stress Changes due to Recent Seismic Events in the Central Apennines (Italy)

The Central Apennines, Italy, are characterized by moderate seismic activity on normal faults, oriented in directions parallel to the Apenninic chain. The subject of this study is the Umbria-Marche Apennines, a segment approximately 200-km long, where three main seismic events occurred in the last three decades. The 1979 Norcia earthquake was a M_w = 5.8 event, taking place at the south end of the considered segment. The 1984 Gubbio earthquake was a M_w = 5.6 event which took place at the north end. The 1997-1998 Colfiorito sequence constituted 8 main shocks with magnitudes M_w between 5 and 6 and epicenters located between the Gubbio and the Norcia earthquake areas. A model made of an elastic half-space is considered, in which the seismic sources are represented by rectangular dislocations which have the appropriate values of source parameters, and in which the static stress field produced by each event is calculated. The analysis of the Coulomb stress change (ΔC) as a function of time shows that the coseismic stress transfer and fault interaction played an important role in the region during the past three decades: 7 earthquakes of the 9 considered took place where ΔC>0. Such an interaction has been confirmed by the analysis of the aftershocks in the Colfiorito zone post September 26, 1997: about the 61% of the aftershocks considered took place where ΔC>0. The comparison between the ΔC^s due to the coseismic stress transfer and the rate ΔĊ^t due to the tectonic stress allows us to quantify the time advance of the earthquakes. The ΔC^s pattern shows positive values in two areas that can be regarded as historical seismic gaps.     

Determination of characteristics of steam reservoirs by Radon-222 measurements in geothermal fluids

The authors conducted a Rn²²² survey in wells of the Larderello geothermal field (Italy) and observed considerable variations in concentrations. Simple models show that flow-rate plays an important part in the Rn²²² content of each well, as it directly affects the fluid transit time in the reservoirs. Rn²²² has been sampled from two wells of the Serrazzano area during flow-rate drawdown tests. The apparent volume of the steam reservoir of each of these two wells has been estimated from the Rn²²² concentration versus flow-rate curves.List of symbols Q Flow-rate (kg h^–1) - Decay constant of Rn²²² (=7.553×10^–3 h^–1) - Porosity of the reservoir (volume of fluid/volume of rock) - ₁ Density of the fluid in the reservoir (kg m^–3) - ₂ Density of the rock in the reservoir (kg m^–3) - M Stationary mass of fluid filling the reservoir (kg). - E Emanating power of the rock in the reservoir (nCi kg _rock ^–1 h^–1). - P Production rate of Rn²²² in the reservoir: number of atoms of Rn²²² (divided by 1.764×10⁷) transferred by the rock to the mass unit of fluid per unit time (nCi kg _fluid ^–1 h^–1). - N Specific concentration of Rn²²² in the fluid (nCi kg^–1) - Characteristic time of the steam reservoir at maximum flow-rate (=M/Q)     

Hydrogeologic Controls on Induced Seismicity in Crystalline Basement Rocks Due to Fluid Injection into Basal Reservoirs

A series of M_b 3.8–5.5 induced seismic events in the midcontinent region, United States, resulted from injection of fluid either into a basal sedimentary reservoir with no underlying confining unit or directly into the underlying crystalline basement complex. The earthquakes probably occurred along faults that were likely critically stressed within the crystalline basement. These faults were located at a considerable distance (up to 10 km) from the injection wells and head increases at the hypocenters were likely relatively small (～70–150 m). We present a suite of simulations that use a simple hydrogeologic‐geomechanical model to assess what hydrogeologic conditions promote or deter induced seismic events within the crystalline basement across the midcontinent. The presence of a confining unit beneath the injection reservoir horizon had the single largest effect in preventing induced seismicity within the underlying crystalline basement. For a crystalline basement having a permeability of 2 × 10^?17 m² and specific storage coefficient of 10^?7/m, injection at a rate of 5455 m³/d into the basal aquifer with no underlying basal seal over 10 years resulted in probable brittle failure to depths of about 0.6 km below the injection reservoir. Including a permeable (k_z = 10^?13 m²) Precambrian normal fault, located 20 m from the injection well, increased the depth of the failure region below the reservoir to 3 km. For a large permeability contrast between a Precambrian thrust fault (10^?12 m²) and the surrounding crystalline basement (10^?18 m²), the failure region can extend laterally 10 km away from the injection well.     

Source/receiver array directivity effects on marine seismic attenuation measurements

Attenuation of seismic waves, quantified by the seismic quality factor Q, holds important information for seismic interpretation, due to its sensitivity to rock and fluid properties. A recently published study of Q, based on surface seismic reflection data, used a modified spectral ratio approach (QVO), but both source and receiver responses were treated as isotropic, based on simple raypath arguments. Here, this assumption has been tested by computing apparent attenuation generated by frequency-dependent directivity of typical marine source and receiver arrays and acquisition geometries. Synthetic wavelet spectra were computed for reflected rays, summed over the first Fresnel zone, from the base of a single interval, 50–3000 m thick and velocity 2000 m/s, overlying a 2200 m/s half-space, and for offsets of 71–2071 m. The source and receiver geometry were those of an actual survey. The modelled spectra are clearly affected by directivity, most strongly because of surface ghosts. In general, the strong high-frequency component, produced by the array design, leads to apparently negative attenuation in individual reflection events, though this is dependent on offset and target depth. For shallow targets (less than 400–500 ms two-way traveltime (TWT) depth), apparent Q-values as extreme as ?50 to ?100 were obtained. For deeper target depths, the directivity effect is far smaller. The implications of the model study were tested on real data. QVO was applied to 20 true-spectrum-processed CMPs, in a shallow (405–730 ms TWT) and a deeper (1000–1300 ms TWT) interval, firstly using a measured far-field source signature (effectively isotropic), and secondly using computed directivity effects instead. Mean interval Q^?1-values for the deeper interval, 0.029 ± 0.011 and 0.027 ± 0.018 for conventional and directional processing, respectively, suggested no directivity influence on attenuation estimation. For the shallow interval (despite poor spectral signal-to-noise ratios and hence scattered attenuation estimates), directional processing removed directivity-generated irregularities from the spectral ratios, resulting in an improvement from Q^?1_int = ?0.036 ± 0.130 to a realistic Q^?1_int = 0.012 ± 0.030: different at 94% confidence level. Equivalent Q-values are: for the deeper interval, 35 and 37 for conventional and directional processing, respectively, and ?28 and 86 for the shallow interval. These results support the conclusions of the model studies, i.e. that source/receiver directivity has a negligible effect except for shallow targets (e.g. TWT depth ≤ 500 ms) imaged with conventional acquisition geometry. In such cases directivity corrections to spectra are strongly recommended.     

Seismic dispersion and attenuation in layered porous rocks with fractures of varying orientations

Wave‐induced fluid flow plays an important role in affecting the seismic dispersion and attenuation of fractured porous rocks. While numerous theoretical models have been proposed for the seismic dispersion and attenuation in fractured porous rocks, most of them neglect the wave‐induced fluid flow resulting from the background anisotropy (e.g. the interlayer fluid flow between different layers) that can be normal in real reservoirs. Here, according to the theories of poroelasticity, we present an approach to study the frequency‐dependent seismic properties of more realistic and complicated rocks, i.e. horizontally and periodically layered porous rock with horizontal and randomly orienting fractures, respectively, distributed in one of the two periodical layers. The approach accounts for the dual effects of the wave‐induced fluid flow between the fractures and the background pores and between different layers (the interlayer fluid flow). Because C₃₃ (i.e., the modulus of the normally incident P‐wave) is directly related to the P‐wave velocity widely measured in the seismic exploration, and its comprehensive dispersion and attenuation are found to be most significant, we study mainly the effects of fracture properties and the stiffness contrast between the different layers on the seismic dispersion and attenuation of C₃₃. The results show that the increasing stiffness contrast enhances the interlayer fluid flow of the layered porous rocks with both horizontal and randomly orienting fractures and weakens the wave‐induced fluid flow between the fractures and the background pores, especially for the layered porous rock with horizontal fractures. The modelling results also demonstrate that for the considered rock construction, the increasing fracture density reduces the interlayer fluid flow while improves the dispersion and attenuation in the fracture‐relevant frequency band. Increasing fracture aspect ratio is found to reduce the dispersion and attenuation in the fracture‐relevant frequency band only, especially for the layered porous rock with horizontal fractures.     

Probabilistic Seismic Hazard Assessment for Iraq Using Complete Earthquake Catalogue Files

Probabilistic seismic hazard analysis (PSHA) has been carried out for Iraq. The earthquake catalogue used in the present study covers an area between latitude 29°–38.5° N and longitude 39°–50° E containing more than a thousand events for the period 1905–2000. The entire Iraq region has been divided into thirteen seismogenic sources based on their seismic characteristics, geological setting and tectonic framework. The completeness of the seismicity catalogue has been checked using the method proposed by Stepp (1972). The analysis of completeness shows that the earthquake catalogue is not complete below M_s=4.8 for all of Iraq and seismic source zones S1, S4, S5, and S8, while it varies for the other seismic zones. A statistical treatment of completeness of the data file was carried out in each of the magnitude classes. The Frequency Magnitude Distributions (FMD) for the study area including all seismic source zones were established and the minimum magnitude of complete reporting (M_c) were then estimated. For the entire Iraq the M_c was estimated to be about M_s=4.0 while S11 shows the lowest M_c to be about M_s=3.5 and the highest M_c of about M_s=4.2 was observed for S4. The earthquake activity parameters (activity rate , b value, maximum regional magnitude m_max) as well as the mean return period (R) with a certain lower magnitude m_min m along with their probability of occurrence have been determined for all thirteen seismic source zones of Iraq. The maximum regional magnitude m_max was estimated as 7.87 ± 0.86 for entire Iraq. The return period for magnitude 6.0 is largest for source zone S3 which is estimated to be 705 years while the smallest value is estimated as 9.9 years for all of Iraq.The large variation of the b parameter and the hazard level from zone to zone reflects crustal heterogeneity and the high seismotectonic complexity. The seismic hazard near the source boundaries is directly and strongly affected by the change in the delineation of these boundaries. The forces, through which the geological structure along the plate boundary in Eastern and Northeastern Iraq are evolved, are still active causing stress-strain accumulation, deformation and in turn producing higher probabilities of earthquake activity. Thus, relatively large destructive earthquakes are expected in this region. The study is intended to serve as a reference for more advanced approaches and to pave the path for the probabilistic assessment of seismic hazard in this region.     

The 2008 West Bohemia earthquake swarm in the light of the WEBNET network

A swarm of earthquakes of magnitudes up to M _L = 3.8 stroke the region of West Bohemia/Vogtland (border area between Czechia and Germany) in October 2008. It occurred in the Novy Kostel focal zone, where also all recent earthquake swarms (1985/1986, 1997, and 2000) took place, and was striking by a fast sequence of macroseismically observed earthquakes. We present the basic characteristics of this swarm based on the observations of a local network WEBNET (West Bohemia seismic network), which has been operated in the epicentral area, on the Czech territory. The swarm was recorded by 13 to 23 permanent and mobile WEBNET stations surrounding the swarm epicenters. In addition, a part of the swarm was also recorded by strong-motion accelerometers, which represent the first true accelerograms of the swarm earthquakes in the region. The peak ground acceleration reached 0.65 m/s². A comparison with previous earthquake swarms indicates that the total seismic moments released during the 1985/1986 and 2008 swarms are similar, of about 4E16 Nm, and that they represent the two largest swarms that occurred in the West Bohemia/ Vogtland region since the M _L = 5.0 swarm of 1908. Characteristic features of the 2008 swarm are its short duration (4 weeks) and rapidity and, consequently, the fastest seismic moment release compared to previous swarms. Up to 25,000 events in the magnitude range of 0.5 < M _L < 3.8 were detected using an automatic picker. A total of nine swarm phases can be distinguished in the swarm, five of them exceeding the magnitude level of 2.5. The magnitude–frequency distribution of the complete 2008 swarm activity shows a b value close to 1. The swarm hypocenters fall precisely on the same fault portion of the Novy Kostel focal zone that was activated by the 2000 swarm (M _L ≤ 3.2) in a depth interval from 6 to 11 km and also by the 1985/1986 swarm (M _L ≤ 4.6). The steeply dipping fault planes of the 2000 and 2008 swarms seem to be identical considering the location error of about 100 m. Furthermore, focal mechanisms of the 2008 swarm are identical with those of the 2000 swarm, both matching an average strike of 170° and dip of 80° of the activated fault segment. An overall upward migration of activity is observed with first events at the bottom and last events at the top of the of the activated fault patch. Similarities in the activated fault area and in the seismic moments released during the three largest recent swarms enable to estimate the seismic potential of the focal zone. If the whole segment of the fault plane was activated simultaneously, it would represent an earthquake of M _L ~5. This is in good agreement with the estimates of the maximum magnitudes of earthquakes that occurred in the West Bohemia/Vogtland region in the past.     

Review of the source characteristics of the Great Sumatra–Andaman Islands earthquake of 2004

The December 26, 2004 Sumatra–Andaman Island earthquake, which ruptured the Sunda Trench subduction zone, is one of the three largest earthquakes to occur since global monitoring began in the 1890s. Its seismic moment was M ₀ = 1.00 × 10²³–1.15 × 10²³ Nm, corresponding to a moment-magnitude of M _w = 9.3. The rupture propagated from south to north, with the southerly part of fault rupturing at a speed of 2.8 km/s. Rupture propagation appears to have slowed in the northern section, possibly to ∼2.1 km/s, although published estimates have considerable scatter. The average slip is ∼5 m along a shallowly dipping (8°), N31°W striking thrust fault. The majority of slip and moment release appears to have been concentrated in the southern part of the rupture zone, where slip locally exceeded 30 m. Stress loading from this earthquake caused the section of the plate boundary immediately to the south to rupture in a second, somewhat smaller earthquake. This second earthquake occurred on March 28, 2005 and had a moment-magnitude of M _w = 8.5.     

Scaling relations for seismic events induced by mining

The values of seismic moment andS-wave corner frequency from 1575 seismic events induced in South African, Canadian, Polish, and German underground mines were collected to study their scaling relations. The values ofP-wave corner frequency from 649 events were also available. Seismic moments of these events range from 5*10³ to 2*10¹⁵ N·m (moment magnitude is from –3.6 to 4.1), theS-wave corner frequency ranges from 0.7 to 4438 Hz, and theP-wave corner frequency is between 5 and 4010 Hz. The slope of a regression line between the logarithm ofS- andP-wave corner frequencies is equal to one, and the corner frequencies ofP waves are higher than those ofS waves on the average by about 25 percent. In studies of large and moderate earthquakes it has been found that stress drop is approximately independent of the seismic moment, which means that seismic moment is inversely proportional to the third power of corner frequency. Such a behavior was confirmed for most of the data considered here. A breakdown in the similarity betwen large and small events seems to occur for the events with moment magnitude below –2.5. The average values of seismic moment referred to the same range of corner frequency, however, are vastly different in various mining areas.     

Estimating permeability from field measurements of seismic attenuation in fractured chalk

Broadband (100–4000 Hz) cross‐hole seismic data have been acquired at a borehole test site where extensive hydrological investigations have previously been performed, including in situ estimates of permeability. The rock type is homogeneous chalk and fractures and bedding planes have been identified from well logs. High values of seismic attenuation, Q= 22 ≤ 27 ≤ 33, were observed over a 10 m depth interval where fracture permeability values of 20–50 darcy had been recorded. An attempt has been made to separate the attenuation due to scattering and intrinsic mechanisms. The estimated values of intrinsic attenuation, Q= 31 ≤ 43 ≤ 71, have been reproduced using a number of current theories of seismic‐wave propagation and fluid‐flow‐induced seismic attenuation in cracked and fractured media. A model that considers wavelength‐scale pressure gradients is the preferred attenuation mechanism. Model parameters were obtained from the hydro‐geological and seismic data. However, we conclude that it is not possible to use seismic Q to measure rock permeability remotely, principally because of the inherent uncertainties arising from model parameterisations.