Characteristics and Applications of Fluid Inclusions in the Eogene System of the Biyang Depression—I.A Fluid Inclusion Study

Presented in this paper are the rypes,salinities,homogenization temperatures and organic components of fluid inclusions formed at the four stages of diagenetic authigenesis in the Eogene of the Biyang Depression.The results of cooling experiments on fluid inclusions were used to determine the fluid system and composition of saline aqueous solution in each of the stages .The homogenization temperatures of saline aqueous solution inclusions and hydrocarbon organic inclu-sions have been corrected by two approaches ,and the trapping temperatures and pressures of fluid inclusions at each of the stages have been obtained.This strdy has shed light on the physicochemistry and evolution of diagenetic fluids.The diagentic fluid system is a system which was transformed from a chloride-bearing to a carbonate-bearing system along with the diagenic evolu-tion.The decrease of diagenetic temperature at Stage III of diagenetic authigenesis suggests that the depression would have experiences uplifting at that time.The fluorescent characteristics of fluid inclusions indicate the varieties of organic components in fluid inclusions both in time and in space.     

S, C, O, H Isotope Data and Noble Gas Studies of the Maoniuping LREE Deposit, Sichuan Province, China： A Mantle Connection for Mineralization

The Maoniuping REE deposit, located about 22 km to the southwest of Mianning, Sichuan Province, is the second largest light REE deposit in China, subsequent to the Bayan Obo Fe-Nb-REE deposit in the Inner Mongolia Autonomous Region. Tectonically, it is located in the transitional zone between the Panxi rift and the Longmenshan-Jinpingshan orogenic zone. It is a carbonatite vein-type deposit hosted in alkaline complex rocks. The bastnaesite-barite, bastnaesite-calcite, and bastnaesite-microcline lodes are the main three types of REE ore lodes. Among these, the first lode is distributed most extensively and its REE mineralization is the strongest. Theδ34Sv-CDT values of the barites in the ore of the deposit vary in a narrow range of +5.0 to +5.1‰in the bastnaesite-calcite lode and +3.3 to +5.9‰in the bastnaesite-barite lode, showing the isotopic characteristics of magma-derived sulfur. Theδ13Cv-PDB values and theδ518OV-SMOW values in the bastnaesite-calcite lode range from -3.9 to -6.9‰and from +7.3 to +9.7‰, respectively, which fall into the range of "primary carbonatites", showing that carbon and oxygen in the ores of the Maoniuping deposit were derived mainly from a deep source. Theδ13Cv-PDB values of fluid inclusions vary from -3.0 to -5.6‰, with -3.0 to -4.0‰in the bastnaesite-calcite lode and -3.0 to -5.6‰in the bastnaesite-barite lode, which show characteristics of mantle-derived carbon. TheδDv-SMOW values of fluid inclusions range from -57 to -88‰, with -63 to -86‰in the bastnaesite-calcite lode and -57 to -88‰in the bastnaesite-barite lode, which show characteristics of mantle-derived hydrogen. Theδ18OH2OV-SMOW values vary from +7.4 to +8.6‰in the bastnaesite calcite lode, and +6.7 to +7.8‰in the bastnaesite-barite lode, almost overlapping the range of +5.5 to +9.5‰for magmatic water. The 4He content, R/Ra ratios are (13.95 to 119.58×10-6 (cm3/g)STP and 0.02 to 0.11, respectively, and 40Ar/36Ar is 313±1 to 437±2. Considering the 4He increase caused by high contents of radioactive elements, a mantle-derived fluid probably exists in the inclusions in the fluorite, calcite and bastnaesite samples. The Maoniuping deposit and its associated carbonatite-alkaline complex were formed in 40.3 to 12.2 Ma according to K-Ar and U-Pb data. All these data suggest that large quantities of mantle fluids were involved in the metallogenic process of the Maoniuping REE deposit through a fault system.     

The role of carbonate-fluoride melt immiscibility in shallow REE deposit evolution

The Lugiin Gol nepheline syenite intrusion, Mongolia, hosts a range of carbonatite dikes mineralized in rare-earth elements(REE). Both carbonatites and nepheline syenite-fluorite-calcite veinlets are host to a previously unreported macroscale texture involving pseudo-graphic intergrowths of fluorite and calcite. The inclusions within calcite occur as either pure fluorite, with associated REE minerals within the surrounding calcite, or as mixed calcite-fluorite inclusions, with associated zirconosilicate minerals. Consideration of the nature of the texture, and the proportions of fluorite and calcite present(～29 and 71 mol%,respectively), indicates that these textures most likely formed either through the immiscible separation of carbonate and fluoride melts, or from cotectic crystallization of a carbonatefluoride melt. Laser ablation ICP-MS analyses show the pure fluorite inclusions to be depleted in REE relative to the calcite. A model is proposed, in which a carbonate-fluoride melt phase enriched in Zr and the REE, separated from a phonolitic melt, and then either unmixed or underwent cotectic crystallization to generate an REE-rich carbonate melt and an REE-poor fluoride phase. The separation of the fluoride phase(either solid or melt) may have contributed to the enrichment of the carbonate melt in REE, and ultimately its saturation with REE minerals. Previous data have suggested that carbonate melts separated from silicate melts are relatively depleted in the REE, and thus melt immiscibility cannot result in the formation of REE-enriched carbonatites. The observations presented here provide a mechanism by which this could occur, as under either model the textures imply initial separation of a mixed carbonate-fluoride melt from a silicate magma. The separation of an REEenriched carbonate-fluoride melt from phonolitic magma is a hitherto unrecognized mechanism for REE-enrichment in carbonatites, and may play an important role in the formation of shallow magmatic REE deposits.     

Concentration Mechanism of Ore-Forming Fluid in Huize Lead-Zinc Deposits, Yunnan Province

The Huize Pb-Zn deposits of Yunnan Province, located in the south-central part of the Sichuan-Yunnan-Guizhou (SYG) Pb-Zn multimetal mineralization district (MMD), are strictly controlled by fault zones. The sources of ore-forming fluid in the deposits have been debated for a long time. Calcite, a gangue mineral, has uniform C and O isotopes. The δ13CPDB and δ18OSMOW values vary respectively from -2.1×10-3 to -3.5×10-3 (mean -2.8×10-3) and 16.7×10-3-18.6×10-3 (mean 17.7×10-3). No obvious difference can be found in C and O isotopes among occurrences and elevations and even ore-bodies. Types of inclusions include those of pure liquid (L), liquid-rich gas-liquid (L V), and three-phase ones containing a daughter mineral (S L V) and immiscible CO2 with three-phases (VCO2 LCO2 LH2O). Their homogenization temperatures vary from 110 to 400 ℃, and two peaks are shown. (87Sr/86Sr)0 ratios of calcite in the deposits are higher than those in the mantle and Emeishan basalts, and slightly higher than those in the Baizuo Formation, which the Huize lead-zinc deposits are found in. All of the (87Sr/86Sr)0 are low relative to those in the basement rocks. Fractionation of Sr isotope did not occur in the ore-forming fluid during the precipitation of minerals. The results indicate that the ore-forming fluid is homogeneous and derived from the mixing of different fluids. Gas-liquid inclusions can be separated into two groups in 300-400 ℃ with a salinity of 5 %-6 % and 12 %-16 % NaCl respectively. However, the salinities of inclusions vary from 7 % to 23 % NaCl in 100-300 ℃, especially in 150-250 ℃. The formation pressures of faulted zones are (50-320)×105 Pa. The estimated pressures of the overlying rocks on the ore bodies are 574×105-640×105 Pa. The pressures of ore-forming processes would be 145×105 to 754×105 Pa. Therefore, pressure sharply reduced and boiling occurred when the ore-forming fluid flew into the fault zones. As a result, the ore-forming fluid was highly concentrated, and metallic minerals began to precipitate from the fluid on a great scale. The high-grade lead-zinc deposits were formed when the fluid was under saturation or over-saturation conditions.     

内蒙古东升庙矿床岩浆热液叠加成矿作用——来自地质与矿物包裹体测温的证据

The Dongshengmiao Pb-Zn deposit located in the Mesoproterozoic aulacogen in a passive continental margin in the north- west margin of the North-China Craton is widely considered to be a untypical SEDEX deposit.Recently,new types of mineralization such as chalcopyrite veins and re-crystallized sphalerite ores with visible hydrothermal alteration have been found in the deposit at depth.In this paper we report the decrepitation temperatures of fluid inclusions in chalcopyrite,sphalerite and quartz from these new types of ores.The decrepitation temperatures of fluid inclusions in chalcopyrite(4 samples),sphalerite(2 samples)and quartz(5 samples)are 303～456℃,97～497℃,146～350℃and 350～556℃,respectively.The decrepitation temperatures of fluid inclusions in the vein-type chalcopyrite are similar to the decrepitation temperatures of fluid inclusions in chalcopyrite from the Hercynian Oubulage porphyry Cu-Au deposit(313～514℃)and the Chehugou porphyry Cu-Mo deposit(277～485℃),supporting our interpretation that the Dongshengmiao deposit was overprinted by magmatic hydrothermal mineralization.The decrepitation temperatures of fluid inclusions in re-crystallized sphalerite from the Dongshengmiao deposit are characterized by two peaks,97～358℃and 358～497℃.The decrepitation temperatures of fluid inclusions in quartz in ehalcopyrite veins from the Dongshengmiao deposit are also characterized by two peaks,146～350℃and 350～556℃.The lower and higher temperature peaks in both cases are considered to represent two separate mineralization events,original SEDEX mineralization and magmatic hydrothermal overprinting,respectively.The higher decrepitation temperatures of fluid inclusions in quartz and sphalerite from the Dongshengmiao deposit are similar to the decrepitation temperatures(340～526℃)of fluid inclusions in sphalerite from the Baiyinnuoer skarn-type Pb-Zn deposit in the region. Replacement of pyrite by sphalerite and overgrowth of chalcopyrite on pyrite in the Dongshengmiao support our interpretation that the original SEDEX mineralization was overprinted by magmatic hydrothermal activity in the deposit.Our results suggest that there may be separate porphyry and skarn-type deposits related to Hercynian magmatism and associated hydrothermal activities in the Langshan area, which are potential exploration targets in the future.     

Pegmatite fluids of different origins and their implications for mineralization

Characteristics of ore-forming fluids as inferred from detailed studies of inclusions indicate that pegmatites may have different origins.For example,the granitic pegmatite at Mufushan is originated from magma differentiation at 1100-200℃,while the No.3 Pegmatite Vein in Xinjiang may owe its origin to a pegmatitic magma produced via metamorphic anatexis at 1140-200℃.Pegmatite fluids of the above two types are a melt-liquid system and may evolve into a solid-melt or solid-liquid system that would have a critical bearing on metasomatism and intergranular solutions.The Minxi pegmatite,on the oter hand,resulted from metamorphic differentiation,with its fluid(formed at 400-180℃）exhibiting many features of metamorphism.Pegmatites of different origins are distributed in tectonic units of different characters and are different bot in the nature of ore-foming fluid and in the source of ore-metals.This concept of polygene launches a challenge to the traditional belief that pegmatite is exclusively originated from magma differentiation and may be helphfou for the establishment of a new theory of pegmatite genesis.     

A Fluid Inclusion Study of Vein-type Copper Mineralization in the East Wulasigou Pb–Zn–Cu Deposit, Altay, Northwestern China

The Wulasigou Cu-Pb-Zn deposit,located 15 km northwest of Altay city in Xinjiang,is one of many Cu-Pb-Zn polymetallic deposits in the Devonian Kelan volcanic-sedimentary basin in southern Altaids.Two mineralizing periods can be distinguished:the marine volcanic sedimentary PbZn mineralization period,and the metamorphic hydrothermal Cu mineralization period,which is further divided into an early bedded foliated quartz vein stage(Q1) and a late sulfide-quartz vein stage(Q2) crosscutting the foliation.Four types of fluid inclusions were recognized in the Q1 and Q2 quartz from the east orebodies of the Wulasigou deposit:H_2O-CO_2 inclusions,carbonic fluid inclusions,aqueous fluid inclusions,and daughter mineral-bearing fluid inclusions.Microthermometric studies show that solid CO_2 melting temperatures(T_(m,CO2)) of H_2O-CO_2 inclusions in Ql are from-62.3℃ to-58.5C,clathrate melting temperatures(T_(m,clath)l) are from 0.5 C to 7.5 C,partial homogenization temperatures(T_(h,CO2)) vary from 3.3℃ to 25.9℃(to liquid),and the total homogenization temperatures(T_(h,tot)) vary from 285℃ to 378℃,with the salinities being 4.9%-15.1%NaCl eqv.and the CO_2-phase densities being 0.50-0.86 g/cm~3.H_2O-CO_2 inclusions in Q2 have T_(m,CO_2) from-61.9℃ to-56.9℃,T_(m,clath)from 1.3℃ to 9.5℃,T_(h,CO2) from 3.4℃ to 28.7℃(to liquid),and T_(h,tot) from 242℃ to 388℃,with the salinities being 1.0%-15.5%NaCl eqv.and the CO_2-phase densities being 0.48-0.89 g/cm~3.The minimum trapping pressures of fluid inclusions in Q1 and Q2 are estimated to be 260-360 MPa and180-370 MPa,respectively.The δ~(34)S values of pyrite from the volcanic sedimentary period vary from2.3‰ to 2.8‰(CDT),and those from the sulfide-quartz veins fall in a narrow range of-1.9‰ to 2.6‰(CDT).The δD values of fluid inclusions in Q2 range from-121.0‰ to-100.8‰(SMOW),and theδ~(18)O_(H2O) values calculated from δ~(18)O of quartz range from-0.2‰ to 8.3‰(SMOW).The δD-δ~(18)O_(H2O)data are close to the magmatic and metamorphic fields.The fluid inclusion and stable isotope data documented in this study indicate that the vein-type copper mineralization in the Wulasigou Pb-Zn-Cu deposit took place in an orogenic-metamorphic enviroment.     

The Discovery and Study of Mantle-Derived Spinel-Lherzolite in the Darbut Ultrabasic Zone, Xinjiang

The spinel-lherzolite under study was discovered in the magnesian ultrabasic rocks in a Palaeozoic ophiolite zone. It occurs as spheroidal inclusions. Its petrofabric features, slip system of plastic deformation, REE distribution and estimation of temperature and pressure conditions of rock formation are all very similar to those of the ultramafic inclusion in Cenozoic and Mesozoic alkali basalt and kimberlite.     

Depth of volcanic basalt degassing forecasted from CO2 fluid inclusions

Fluid inclusions have recorded the history of degassing in basalt. Some fluid inclusions in olivine and pyroxene phenocrysts of basalt were analyzed by micro-thermometry and Raman spectroscopy in this paper. The experimental results showed that many inclusions are present almost in a pure CO2 system. The densities of some CO2 inclusions were computed in terms of Raman spectroscopic characteristics of CO2 Fermi resonance at room temperature. Their densities change over a wide range, but mainly between 0.044 g/cm3 and 0.289 g/cm3. Their micro-thermometric measurements showed that the CO2 inclusions examined reached homogenization between 1145.5℃ and 1265℃ . The mean value of homogenization temperatures of CO2 inclusions in basalts is near 1210℃. The trap pressures (depths) of inclusions were computed with the equation of state and computer program. Distribution of the trap depths makes it know that the degassing of magma can happen over a wide pressure (depth) range, but mainly at the depth of 0.48 km to 3.85 km. This implicates that basalt magma experienced intensive degassing and the CO2 gas reservoir from the basalt magma also may be formed in this range of depths. The results of this study showed that the depth of basalt magma degassing can be forecasted from CO2 fluid inclusions, and it is meaningful for understanding the process of magma degassing and constraining the inorganogenic CO2 gas reservoir.     

A Study of Ore-forming Fluids in the Shimensi Tungsten Deposit, Dahutang Tungsten Polymetallic Ore Field, Jiangxi Province, China

The Dahutang tungsten polymetallic ore field is located north of the Nanling W-Sn polymetallic metallogenic belt and south of the Middle—Lower Yangtze River Valley Cu-Mo-Au-Fe porphyry-skarn belt.It is a newly discovered ore field,and probably represents the largest tungsten mineralization district in the world.The Shimensi deposit is one of the mineral deposits in the Dahutang ore field,and is associated with Yanshanian granites intruding into a Neoproterozoic granodiorite batholith.On the basis of geologic studies,this paper presents new petrographic,microthermometric,laser Raman spectroscopic and hydrogen and oxygen isotopic studies of fluid inclusions from the Shimensi deposit.The results show that there are three types of fluid inclusions in quartz from various mineralization stages:liquid-rich two-phase fluid inclusions,vapor-rich two-phase fluid inclusions,and three-phase fluid inclusions containing a solid crystal,with the vast majority being liquid-rich two-phase fluid inclusions.In addition,melt and melt-fluid inclusions were also found in quartz from pegmatoid bodies in the margin of the Yanshanian intrusion.The homogenization temperatures of liquid-rich two-phase fluid inclusions in quartz range from 162 to 363℃ and salinities are 0.5wt%-9.5wt%NaCI equivalent.From the early to late mineralization stages,with the decreasing of the homogenization temperature,the salinity also shows a decreasing trend.The ore-forming fluids can be approximated by a NaCl-H_2O fluid system,with small amounts of volatile components including CO_2,CH_4 and N_2,as suggested by Laser Raman spectroscopic analyses.The hydrogen and oxygen isotope data show that δ5D_(V-smow) values of bulk fluid inclusions in quartz from various mineralization stages vary from-63.8‰ to-108.4‰,and the δ~(18)O_(H2O) values calculated from the δ~(18)O_(V-)smow values of quartz vary from-2.28‰ to 7.21‰.These H-O isotopic data are interpreted to indicate that the ore-forming fluids are mainly composed of magmatic water in the early stage,and meteoric water was added and participated in mineralization in the late stage.Integrating the geological characteristics and analytical data,we propose that the ore-forming fluids of the Shimensi deposit were mainly derived from Yanshanian granitic magma,the evolution of which resulted in highly differentiated melt,as recorded by melt and melt-fluid inclusions in pegmatoid quartz,and high concentrations of metals in the fluids.Cooling of the ore-forming fluids and mixing with meteoric water may be the key factors that led to mineralization in the Dahutang tungsten polymetallic ore field.     

论四川冕宁稀土矿床的成因

本文从实际出发，以寻求路网的满意养护对策，基于柔性中面网的灰色本质，为此，推导了预测路况ＰＣＩ的多点激励有后效模型ＧＭ，并提出了一个灰色发展系数指标［ａ］，它可从发展机制上保证对策满意性。而后，从满意对策的特点出发，建立了确定路网满意养护对策的灰色非线性优化模型，并给出了简化迭代算法。应用示例表明，该文方法确定的养护对策，不仅满意性得到了初步保证，而且使用效益也有较大程度的提高。     

Fluid Inclusion Studies of Ore and Gangue Minerals from the Piaotang Tungsten Deposit, Southern Jiangxi Province, China

The Piaotang deposit is one of the largest vein-type W-polymetallic deposits in southern Jiangxi Province, South China. The coexistence of wolframite and cassiterite is an important feature of the deposit. Based on detailed petrographic observations, microthermometry of fluid inclusions in wolframite, cassiterite and intergrown quartz was undertaken. The inclusions in wolframite were observed by infrared microscope, while those in cassiterite and quartz were observed in visible light. The fluid inclusions in wolframite can be divided into two types: aqueous inclusions with a large vapor-phase proportion and aqueous inclusions with a small vapor-phase ratio. The homogenization temperature (Th) of inclusions in wolframite with large vapor-phase ratios ranged from 280°C to 390°C, with salinity ranging from 3.1 to 7.2 wt% NaCl eq. In contrast, the Th values of inclusions with small vapor-phase ratios ranged from 216°C to 264°C, with salinity values ranging from 3.5 to 9.3 wt% NaCl eq. Th values of primary inclusions in cassiterite ranged from 316°C to 380°C, with salinity ranging from 5.4 to 9.3 wt% NaCl eq. Th values for primary fluid inclusions in quartz ranged from 162°C to 309°C, with salinity values ranging from 1.2 to 6.7 wt% NaCl eq. The results show that the formation conditions of wolframite, cassiterite and intergrown quartz are not uniform. The evolutionary processes of fluids related to these three kinds of minerals are also significantly different. Intergrown quartz cannot provide the depositional conditions of wolframite and cassiterite. The fluids related to tungsten mineralization for the NaCl-H2O system had a medium-to-high temperature and low salinity, while the fluids related to tin mineralization for the NaCl-H2O system had a high temperature and medium-to-low salinity. The results of this study suggest that fluid cooling is the main mechanism for the precipitation of tungsten and tin.     

Geology,Fluid Inclusions,and Isotopic Geochemistry of the Jinman Sediment‐Hosted Copper Deposit in the Lanping Basin,China

The Jinman Cu polymetallic deposit is located within Middle Jurassic sandstone and slate units in the Lanping Basin of southwestern China. The Cu mineralization occurs mainly as sulfide‐bearing quartz–carbonate veins in faults and fractures, controlled by a Cenozoic thrust–nappe system. A detailed study of fluid inclusions from the Jinman deposit distinguishes three types of fluid inclusions in syn‐ore quartz and post‐ore calcite: aqueous water (type A), CO₂–H₂O (type B), and CO₂‐dominated (type C) fluid inclusions. The homogenization temperatures of CO₂–H₂O inclusions vary from 208°C to 329°C, with corresponding salinities from 0.6 to 4.6 wt.% NaCl equivalent. The homogenization temperatures of the aqueous fluid inclusions mainly range from 164°C to 249°C, with salinities from 7.2 to 20.2 wt.% NaCl equivalent. These characteristics of fluid inclusions are significantly different from those of basinal mineralization systems, but similar to those of orogenic or magmatic mineralization systems. The H and O isotope compositions suggest that the ore‐forming fluid is predominantly derived from magmatic water, with the participation of basinal brine. The δ³⁴S values are widely variable between ?9.7 ‰ and 9.7 ‰, with a mode distribution around zero, which may be interpreted by the variation in physico‐chemical conditions or by compositional variation of the sources. The mixing of a deeply sourced CO₂‐rich fluid with basinal brine was the key mechanism responsible for the mineralization of the Jinman deposit.     

Research on fluid inclusions of the Yinshan polymetallic deposit, Jiangxi Province, China

In this paper some new advances in the study of fluid inclusions of the Yinshan deposit in Jiangxi Province,China,are presented.The fluid inclusions of the deposit can be divided into four types:1) gas-rich inclusions;2)liquid-rich inclusions;3)salt-saturated H2O inclusions;and 4)single-phase or multiphase CO2-rich inclusions.Homogenization temperatures of the fluid inclusions range from 100 to 520℃,aminly in the range 120-400℃.The daughter crystal-bearing multiphase inclusions present in quartz porphyries(including Nos.13 and 4 dikes)have been observed.In ore veins,some daughter crystal-bearing multiphase inclusions have been observed.too.On the basis of the results of fluid inclusion research,the authors suggest that the ore-forming fluid must have a close genetic relation to magmatic hydrothermal solution.The ore-forming fluid was dominantly originated from the depth and the mixing of magmatic solution with meteoric water was enhanced during ascending of the fluid,accompanying immiscibility and boiling of fluid.Teher may be a conceales igneous body at the depth of the Yinshan deposity,which furnishes the scientific basis for metallogenic prognosis at th depth of the Yinshan deposit.     

Geology and inclusion studies on the genesis of the Baolun gold deposit in Hainan Province,South China

The late Triassic Baolun gold deposit hosted by Silurian phyllites is a large‐scale high‐grade gold deposit in Hainan Island, South China. The ores can be classified into quartz‐vein dominated type and less altered rock type. Three mineralization stages were recognized by mineral assemblages. The early stage, as the most important mineralization stage, is characterized by a quartz–native gold assemblage. The muscovite?quartz?pyrite?native gold assemblage is related to the intermedium mineralization stage. In late mineralization stage, native gold and Bi‐bearing minerals are paragenetic minerals. Microthermometry analyses show that the early mineralization stage is characterized by two types of fluid inclusions, including CO₂‐rich inclusions (C‐type) and aqueous inclusions (W‐type). C‐type inclusions homogenize at 276–335°C with an averaged value of 306°C and have salinities of 1.0–10.0 wt% NaCl equivalent (mean value of 4.9 wt% NaCl equivalent). W‐type inclusions homogenize at 252–301°C (mean value of 278°C) with salinity of 4.0–9.7 wt% NaCl equivalent (mean value of 7.4 wt% NaCl equivalent). In intermedium mineralization stage, C‐type and W‐type inclusions homogenize at 228–320°C (mean value of 283°C) and 178–296°C (mean value of 241°C), with salinities of 2.4–9.9 wt% NaCl equivalent (mean value of 6.5 wt% NaCl equivalent) and 3.7–11.7 wt% NaCl equivalent (mean value of 7.7 wt% NaCl equivalent), respectively. No suitable mineral, such as quartz or calcite, was found for fluid inclusion study from late mineralization stage. In contrast, only aqueous inclusions were found from post‐ore barren veins, which yielded lower homogenization temperatures ranging from 168–241°C (mean value of 195°C) and similar salinities (2.6–12.6 wt% NaCl equivalent with averaged value of 7.2 wt% NaCl equivalent). The different homogenization temperatures and similar salinities of C‐type and W‐type from each mineralization stage indicate that fluid immiscibility and boiling occurred. The Baolun gold deposit was precipitated from a CO₂‐bearing mesothermal fluid, and formed at a syn‐collision environment following the closure of the Paleo‐Tethys.     

扫描电镜—能谱在单个包裹体物质组成研究中的应用

利用扫描电镜－能谱对四川冕宁稀土矿床早期萤石的单个流体－熔融包裹体的成分进行了分析,发现包裹体内流体相离子以Ｎａ、Ｃａ、Ｂａ为主,阴离子以ＳＯ４、Ｆ、Ｃｌ米,有意义的是在包裹体中发现了Ｌａ、Ｃｅ、Ｎｄ等稀土元素,其中矿化元素素铈的含量最高,研究结果进一步证明四川冕宁稀土矿床是一个与盐熔体有关的热液矿床。     

Ore Genesis and Tectonic Significance of the Xiaojiashan Tungsten Deposit,Eastern Tianshan,Xinjiang, China: Evidence from Geology,Fluid Inclusions,and Stable Isotope Geochemistry

The Xiaojiashan tungsten deposit is located about 200 km northwest of Hami City, the Eastern Tianshan orogenic belt, Xinjiang, northwestern China, and is a quartz vein‐type tungsten deposit. Combined fluid inclusion microthermometry, host rock geochemistry, and H–O isotopic compositions are used to constrain the ore genesis and tectonic setting of the Xiaojiashan tungsten deposit. The orebodies occur in granite intrusions adjacent to the metamorphic crystal tuff, which consists of the second lithological section of the first Sub‐Formation of the Dananhu Formation (D₂d ₁²). Biotite granite is the most widely distributed intrusive bodies in the Xiaojiashan tungsten deposit. Altered diorite and metamorphic crystal tuff are the main surrounding rocks. The granite belongs to peraluminous A‐type granite with high potassic calc‐alkaline series, and all rocks show light Rare Earth Element (REE)‐enriched patterns. The trace element characters suggest that crystallization differentiation might even occur in the diagenetic process. The granite belongs to postcollisional extension granite, and the rocks formed in an extensional tectonic environment, which might result from magma activity in such an extensional tectonic environment. Tungsten‐bearing quartz veins are divided into gray quartz vein and white quartz veins. Based on petrography observation, fluid inclusions in both kinds of vein quartz are mainly aqueous inclusions. Microthermometry shows that gray quartz veins have 143–354°C of T_h, and white quartz veins have 154–312°C of T_h. The laser‐Raman test shows that CO₂ is found in fluid inclusions of the tungsten‐bearing quartz veins. Quadrupole mass spectrometry reveals that fluid inclusions contain major vapor‐phase contents of CO₂, H₂O. Meanwhile, fluid inclusions contain major liquid‐phase contents of Cl^?, Na⁺. It can be speculated that the ore‐forming fluid of the Xiaojiashan tungsten deposit is characterized by an H₂O–CO₂, low salinity, and H₂O–CO₂–NaCl system. The range of hydrogen and oxygen isotope compositions indicated that the ore‐forming fluids of the tungsten deposit were mainly magmatic water. The ore‐forming age of the Xiaojiashan deposit should to be ~227 Ma. During the ore‐forming process, the magmatic water had separated from magmatic intrusions, and the ore‐bearing complex was taken to a portion where tungsten‐bearing ores could be mineralized. The magmatic fluid was mixed by meteoric water in the late stage.     

Fluid Inclusions and Hydrogen,Oxygen, and Lead Isotopes of the Antuoling Molybdenum Deposit,Northern Taihang Mountains,China

The Antuoling Mo deposit is a major porphyry‐type deposit in the polymetallic metallogenic belt of the northern Taihang Mountains, China. The processes of mineralization in this deposit can be divided into three stages: an early quartz–pyrite stage, a middle quartz–polymetallic sulfide stage, and a late quartz–carbonate stage. Four types of primary fluid inclusions are found in the deposit: two‐phase aqueous inclusions, daughter‐mineral‐bearing multiphase inclusions, CO₂–H₂O inclusions, and pure CO₂ inclusions. From the early to the late ore‐forming stages, the homogenization temperatures of the fluid inclusions are 300 to >500°C, 270–425°C, and 195–330°C, respectively, with salinities of up to 50.2 wt%, 5.3–47.3 wt%, and 2.2–10.4 wt% NaCl equivalent, revealing that the ore‐forming fluids changed from high temperature and high salinity to lower temperature and lower salinity. Moreover, based on the laser Raman spectra, the compositions of the fluid inclusions evolved from the NaCl–CO₂–H₂O to the NaCl–H₂O system. The δ¹⁸O_H2O and δD values of quartz in the deposit range from +3.9‰ to +7.0‰ and ?117.5‰ to ?134.2‰, respectively, reflecting the δD of local meteoric water after oxygen isotopic exchange with host rocks. The Pb isotope values of the sulfides (²⁰⁸Pb/²⁰⁴Pb, 36.320–37.428; ²⁰⁷Pb/²⁰⁴Pb, 15.210–15.495; ²⁰⁶Pb/²⁰⁴Pb, 16.366–17.822) indicate that the ore‐forming materials originated from a mixed upper mantle–lower crust source.     

Rock—Forming and Ore—Forming Temperatures of Lianhuashan Tungsten Deposit,Guangdong Province

The Lianhuashan tungsten deposit occurs in the volcanic terrain in the coastal area of Southeast China,where rhyolite,quartz porphyry and granite consitute a complee magmatic series.The orebodies are located in the endo-and exo-contacts between the quartz porphyry and the metasandstone of the Xiaoping coal measues.Hongenization temperatures of melt inclusions in zircon and quartz are 1100℃and 1050℃ for rhyolite,1000℃ and 860℃for quartz porphyry,and 950-1000℃and 820℃ for granite,respectively,demonstrating that the rockforming temperatures dropped successively from the eruptive to the intrusive rocks and that the homogenization temperatures of melt inclusions in zircon are 50-180℃higher than those in quartz.Homogenization temperatures of gas-liquid inclusions in quartz are 230-520℃（mostly 230-270℃）for quartz porphyry,200-450℃（mostly 200-360℃）for ore-bearing quartz veins,150-210℃for granite 170-200℃ for the vein quartz in it.Quartz from the quartz porphyry and from the ore-earing quartz veins show similar characteristics in inclusion type and homogenization temperature,indicating that intergranular solutions must have been formed upon cooling of magma and that ore-forming solutions for the tungstem mineralization were evolved mainly from ore-bearing intergranular solutions in the quartz porphyry.     

Characteristics of Porphyry Cu Mineralization at Waisoi (Namosi District), Viti Levu, Fiji

The porphyry Cu deposits at Waisoi in Namosi district, Viti Levu are separated into two deposits: the Waisoi East deposit and the Waisoi West deposit. In the Waisoi East deposit, quartz porphyry is exposed and in the Waisoi West deposit, diorite porphyry is sporadically exposed in addition to a small body of quartz porphyry. The mineralization in the Waisoi East deposit is characterized by the bornite–chalcopyrite–pyrite assemblage associated with traces of molybdenite and native gold. Polyphase fluid inclusions in stockwork quartz veinlets show homogenization temperatures ranging from 210 to >500°C. The high‐grade Cu mineralization in the Waisoi West deposit is characterized by the bornite–chalcopyrite–pyrite assemblage accompanied with sheeted and stockwork quartz veinlets. Polyphase fluid inclusions occasionally containing hematite flakes in quartz veinlets in the center of the Waisoi West deposit homogenize at temperatures ranging from 450°C to >500°C. However, fluid inclusions in stockwork quartz veinlets in the periphery, homogenize at lower temperatures around 210°C. Both in the Waisoi East and Waisoi West deposits, primary bornite–chalcopyrite–pyrite assemblage in the high Cu‐grade zone was deposited at the upper stability limit of chalcopyrite with respect to sulfur fugacity. Thus, the principal Cu mineralization at the Waisoi deposits occurred at a relatively high sulfur fugacity, that is, in a high‐sulfidation environment.