云南斑岩型多金属金矿的嵌布特征及赋存状态研究

云南西部有大量低品位金矿资源,且具有嵌布粒度不均匀、矿石结构复杂、解离不完全等特点,传统工艺矿物学分析不易快速、准确测定金赋存状态及载金矿物的嵌布特征。本文利用矿物自动分析系统(MLA)、化学分析等方法对滇西多金属金矿进行系统的工艺矿物学研究,查明了该矿的矿物组成、嵌布粒度、连生及包裹关系,同时阐明了载金矿物的工艺矿物学性质对金回收率的影响。结果表明:金主要以游离态自然金的形式存在,嵌布粒度极细,主要集中在0.01~0.02 mm粒度级别;小于0.074 mm粒级的金占原矿总金量的50.08%,其余金以微细包裹体分散于黄铁矿、磁铁矿、黄铜矿等载金矿物中。但载金矿物粒度较细,解离性差,嵌布不均匀,因此提高载金矿物解离度是提高金回收率的一个重要参考方向。     

同步辐射X射线吸收光谱在环境矿物学中的应用

本文介绍了同步辐射X射线吸收光谱（XAS）在环境矿物学中的应用与进展,尤其是在矿物载体催化剂的环境催化活性研究、固-液界面的微观机制研究、毒性痕量元素在矿物中赋存状态的研究、核废料的矿物处置研究等方面的发展现状。最后指出,XAS对推动环境矿物学的发展、优化环境矿物材料和原料的工艺流程具有独特的优势,在我国还有待进一步加强其发展和应用。     

X射线衍射-扫描电镜等技术研究秘鲁铜硫矿石选矿工艺矿物学特征

秘鲁铜硫矿石的主要回收对象是铜和硫矿物,由于铜矿物嵌布复杂、粒度过细以及与各种脉石矿物或金属矿物交生关系紧密,利用传统工艺矿物学研究方法如化学分析、光学显微镜检测等较难准确定量其工艺矿物学参数。本文采用化学分析、X射线衍射、扫描电镜、偏光显微镜及矿物参数自动分析系统(MLA)等技术手段,研究秘鲁铜硫矿石的化学成分、矿物组成和主要矿物的嵌布特征、粒度分布及单体解离特性等,并对影响选矿指标的主要矿物学因素进行分析。结果表明:矿石中主要元素为Cu(0.65%)和S(9.53%)。矿石中黄铁矿(16.57%)含量较高,形态较为规则,与其他矿物之间的交生关系相对简单,粒度普遍偏粗,其中粒径大于0.30mm的黄铁矿占95.06%。铜矿物主要以不规则粒状、皮壳状、网脉状、纤维状、尘粒状、斑点状分布于脉石中或与黄铁矿、闪锌矿、磁铁矿等金属矿物交生紧密,粒度极不均匀,使得铜矿物解离难度加大,且矿石中云母(12.51%)、绿泥石(3.74%)、滑石(3.34%)、高岭石、蒙脱石(3.59%)等黏土质矿物含量较高,在磨矿过程中易发生泥化从而恶化分选环境。根据该类型矿石的工艺矿物学特性,本文建议采用"粗磨-部分优先浮铜-铜硫混浮-混合精矿再磨再选分离"的工艺流程,可得到质量高的铜、硫精矿。     

Mineralogical and ash geochemical studies of coal-mine shale and its hydrocarbon potential: A case study of shale from Makum coalfield,Northeast India

The mineralogy and geochemical studies of the coal-mine shale collected from the Tirap opencast coal-mine (Makum coalfield, Northeast India) are reported in this paper. Thermo-chemical conversion (pyrolysis) of coal-mine shale has been studied to see its hydrocarbon potential. A combined approach using X-Ray diffraction (LTA-XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) equipped with an energy-dispersive X-ray spectrophotometer (EDS), X-ray fluorescence spectrometry (XRF), thermogravimetry-derivative and differential thermogravimetric (TG-DTG and DTA) analysis is made to obtain new information on the mineralogical and geochemical studies of a coal-mine shale (CMS) sample. Gas chromatography-mass spectrometry (GC-MS) analysis is performed to evaluate the quality of the liquid fraction (tar) obtained after pyrolysis at 600°C. The shale sample is dominated by quartz, clay minerals (kaolinite and illite), sulphate bearing phase like gypsum with minor proportion of anatase, probably as artifacts of the plasma-ashing process. GC-MS analysis illustrates the presence of highly oxygenated organic components (M.W. around 94-108) and high molecular weight (M.W. 256) cyclic sulphur (e.g. octathiocane with molecular formula S₈) compounds along with the complex N-containing organic sulphur compounds (M.W. around 255-486) in the tar produced.     

成因矿物学在中国的传播与发展

成因矿物学是现代矿物学的重要组成部分。它研究矿物与矿物组合的时空分布、矿物各内外属性间的关联、矿物形成与变化的条件和过程、矿物与其介质间的相互作用及相应的宏微观标志、和矿物成因分类及矿物成因信息的应用等方面的内容。矿物发生史、矿物标型学、矿物温压计、矿物共生分析和矿物成因分类共同构成本学科的理论体系。其中,矿物标型学是该体系的核心。以陈光远先生为代表的中国矿物学家,在20世纪下半叶,创新性地开展了成因矿物族的研究,建立了完善的成因矿物学理论体系,提出矿物标型六性和矿物学填图的四化法则,提出变质岩、花岗岩、铅锌铁金辰砂萤石等矿床的矿物成因标型和找矿标志,有力地指导了中国的地质研究和找矿实践。进入21世纪以来,矿物学填图参数和方法被进一步发掘和完善,矿物磁学和近红外谱学等便捷填图手段得到广泛应用;大纵深蚀变矿化和矿物标型分带规律得以揭示;矿物标型的地球动力学、构造动力学和矿物系统的演化意义得到深度阐释;成因矿物学作为环境与生命过程研究的指导思想,逐步形成了环境与生命矿物学新分支,将矿物个体发生及矿物标型的思想用于对鱼耳石和有孔虫等生物矿物环境响应的研究,将矿物生物交互作用思想用于土壤能量系统修复研究,将矿物环境耦合思想用于生物有机质对矿物自组装结构和过程的调控研究以及海洋矿物对海洋及大气环境的指示研究等,极大地丰富了矿物发生学和矿物标型学的理论。今后应注意有关成果的系统整合,加强矿物个体发生史的实验研究,保障原创性成果的产出;要注重国际交流,使我国成因矿物学的成果真正成为人类的共同精神财富。     

Mineralogy,geochemistry and origin of Mn in the high-Mn iron ores,Bahariya Oasis,Egypt

Although Mn is one of the major impurities in the economic iron ores from the Bahariya Oasis, information on its modes of occurrence and origin is lacking in previous studies. High-Mn iron ores from El Gedida and Ghorabi–Nasser iron mines were subjected to detailed mineralogical, geochemical, and petrographic investigations using X-ray diffraction (XRD), infrared absorption spectrometry (IR), Raman spectroscopy, X-ray fluorescence (XRF), scanning electron microscopy (SEM), and electron probe microanalyzer (EPMA) to clarify the modes of occurrence of Mn in these deposits and its origin. The results showed that the MnO₂ contents range between 0.03 and 13.9 wt.%. Three mineralogical types have been identified for the Mn in the high-Mn iron ores, including: (1) inclusions within the hematite and goethite and/or Mn accumulated on their active surfaces, (2) coarse-grained and crystalline pyrolusite, and (3) fine-grained cement-like Mn oxide and hydroxide minerals (bixbyite, cryptomelane, aurorite, romanechite, manjiroite, and pyrochroite) between the Fe-bearing minerals. The Mn carbonate mineral (rhodochrosite) was detected only in the Ghorabi–Nasser high-Mn iron ores. Since IR patterns of low-Mn and high-Mn samples are almost the same, a combination of XRD analysis using non-filtered Fe-Kα radiations and Raman spectroscopy could be the best way to identify and distinguish between different Mn minerals.Assuming that both Fe and Mn were derived from the same source, the occurrence of high-Mn iron ores at the base of the stratigraphic section of the deposits overlain by the low-Mn iron ores indicated a supergene origin of the studied ores by descending solutions. The predominance of Mn oxide and hydroxide minerals in botryoidal shapes supports this interpretation. The small grain size of Mn-bearing minerals as well as the features of microbial fossils such as spherical, elliptical, and filamentous shapes of the Fe-bearing minerals suggested a microbial origin of studied iron ores.Variations in the distribution and mineralogy types of Mn in the iron ores of the Bahariya Oasis demanded detailed mineralogical and petrographic characterizations of the deposits before the beneficiation of high-Mn iron ores from the Bahariya Oasis as feedstock for the ironmaking industries in Egypt by magnetizing reduction. High Mn contents, especially in the Ghorabi–Nasser iron ore and occurrence of Mn as inclusions and/or accumulated on the surface of the Fe-bearing minerals would suggest a possible utilization of the high-Mn iron ores to produce ferromanganese alloys.     

Mineral/water interactions in tailings from a tungsten mine, Mount Pleasant, New Brunswick

The pore-water geochemistry and mineralogy of tailings derived from a granitic tungsten deposit were characterized by collecting pore-water samples at discrete depth intervals throughout the tailings for the analysis of major and minor element concentrations. Mineralogical samples from the oxidation zone were analyzed by X-ray diffraction, scanning electron microscopy combined with energy dispersive X-ray spectroscopy (SEM/EDS), electron microprobe (EMP) combined with wavelength dispersive X-ray spectroscopy (WDS), and transmission electron microscopy (TEM). The oxidation of sulfide minerals in the near-surface tailings leads to a decrease in pore-water pH and elevated SO₄, As, and metal concentrations. The unusual mineralogy of this deposit, compared with that of commonly studied base-metal and gold deposits, results in several unique geochemical characteristics. The dissolution of fluorite releases F into the pore water; the F forms strong complexes with Al and enhances the dissolution of aluminosilicate minerals within the oxidation zone. As a result, high Al concentrations (up to 151.7 mg/L) are detected in the near-neutral pore water in the oxidation zone. The combined dissolution of aluminosilicates and carbonate minerals maintains the pH near 10 in the pore water at depth. Elevated concentrations of W (up to 7.1 mg/L) are detected in the pore water throughout the tailings, likely as a result of the dissolution of wolframite. Consistent with geochemical model calculations, results from SEM/EDS, EMP/WDS and TEM/EDS analyses indicate that secondary minerals, which occur as orange-brown coatings on grains of primary-minerals, are Fe oxyhydroxides. Examples of these secondary minerals display a fibrous habit at high resolution in the TEM. One of these minerals, which contains substantial amounts of Al, As, and Si as impurities, was identified by selected-area electron diffraction (SAED) analyses to be goethite. Another mineral contains relatively high amounts of Si, Pb, Bi, and As, and SAED analyses suggest that the mineral is two-line ferrihydrite.     

西北某钒钛磁铁矿矿石的工艺矿物学研究

西北某矿石属低硫含磷的酸性低品位原生钒钛磁铁矿矿石,通过镜下鉴定、X射线衍射分析和扫描电镜分析等多种手段对原矿的化学成分、矿物组成及含量、矿物的产出形式、矿石的结构构造、主要目的矿物的嵌布粒度等进行了详细的工艺矿物学研究,查明矿石的工艺学特性.研究结果表明,该矿石具浸染状构造和交代构造,其中铁矿物主要是钛磁铁矿和赤铁矿,钛矿物包括钛铁矿、金红石和榍石等.钛磁铁矿和钛铁矿均属不均匀细粒—微细粒嵌布特征,在-400目占95%左右的磨矿细度条件下,通过选矿可获得铁精矿和钛精矿两种产品.     

Mineralogical characterization of mine waste

The application of mineralogical characterization to mine waste has the potential to improve risk assessment, guide appropriate mine planning for planned and active mines and optimize remediation design at closed or abandoned mines. Characterization of minerals, especially sulphide and carbonate phases, is particularly important for predicting the potential for acidic drainage and metal(loid) leaching. Another valuable outcome from mineralogical studies of mine waste is an understanding of the stability of reactive and metal(loid)-bearing minerals under various redox conditions. This paper reviews analytical methods that have been used to study mine waste mineralogy, including conventional methods such as X-ray diffraction and scanning electron microscopy, and advanced methods such as synchrotron-based microanalysis and automated mineralogy. We recommend direct collaboration between researchers and mining companies to choose the optimal mineralogical techniques to solve complex problems, to co-publish the results, and to ensure that mineralogical knowledge is used to inform mine waste management at all stages of the mining life cycle. A case study of arsenic-bearing gold mine tailings from Nova Scotia is presented to demonstrate the application of mineralogical techniques to improve human health risk assessment and the long-term management of historical mine wastes.     

环境与生命矿物学的科学内涵与研究方法

环境与生命矿物学是矿物学、环境科学与生命科学之间的交叉学科,是成因矿物学在生命领域的拓展和延伸,是地球系统科学的重要组成部分。生命起源的矿物表征和矿物作用;极端环境下的生物多样性及生物与矿物的关系;生物体的矿物组成、作用、宏微观形貌和自组装结构;生命矿物成核、生长和自组装过程的有机质调控及其响应环境变化的标型特征;生物矿化的过程、机理及其资源环境效应;矿物(含药用矿物)在生命活动中的作用、过程与机理及其开发利用,是环境与生命矿物学的主要研究内容。生命矿物有其自身的特点,选择用于环境及其变迁研究的生命矿物时,应遵循"贯通性"、"灵敏性"、"统计性"和"周期性"等四原则。根据生命矿物进行环境分析研究时,要注意甄别影响矿物学特征变化的环境要素;既要善于利用较便捷成熟的成因矿物学研究手段和方法(如热发光,简称TL),还要充分利用其他学科中的技术(如计算体层摄影术,简称CT),创造性地开发生命矿物学的环境标型。     

Rapid Large Volume 3D Mineral Processing and Liberation Characterization Technique to Sub Micron Resolution

We describe a novel lab based X-ray computed tomography system based on the architecture of X-ray Microscopes (XRM) used in synchrotron radiation facilities to be adapted for mineral processing and mineral liberation analysis. As this is a tomographic technique performed with an XRM, it is non-destructive and does not require complex preparation of polished sections typical of SEM-EDS techniques (such as MLA and QEMSCAN). It complements these existing techniques by providing 3D information and mineral liberation of multi-phase particles with much larger sample volume statistics but at a fraction of the time. In several applications, the technique is superior. These include the characterization of tailing loss in precious minerals; the characterization of porosity, particle size distribution, crack and pore network analysis during comminution, heap leaching and for texture and exposure/lock class analysis for floatation.     

四川杨柳坪低品位镍矿工艺矿物学特征

四川杨柳坪镍矿石属于低品位镍矿资源,其矿石中镍的品位为0.45%,主要以硫化物形式存在(磁黄铁矿、镍黄铁矿)。镍黄铁矿和磁黄铁矿中镍的占有率在90%以上。主要矿物的工艺嵌布粒度统计分析表明,在较细粒级0.040 mm以下粒级及0.020 mm以下级分别有10%~15%及3.5%~5.5%的含量分布,因此选矿分选过程中,将有部分嵌布粒度较细的硫化物矿物难于解离,由于硫化物的磨矿解离度不高,且主要的硫化物彼此间的连体较多,选矿采用以磁黄铁矿为主的硫化物集合体作为回收单位较为适宜。此外,研究区硫化物矿物的物性较脆,磨矿过程中应防止其过粉碎。     

Effect of mechanical treatment on the mineralogical constituents of Abu-Tartour phosphate ore,Egypt

This study deals with the effect of mechanical treatment, using vibrating mill, on the mineralogy and structure of apatite and associated gangue minerals (dolomite, calcite, quartz, pyrite and gypsum) in Abu-Tartour phosphate ore, Egypt. The evolution of mineralogy, crystallinity and deformation mechanism were evaluated with different techniques (XRD, DTA, TGA and FT-IR). Data obtained using these techniques give a good picture about the mechanochemical behavior of the different components in the ore. X-ray diffraction (XRD) indicated that the mineralogy has been changed quantitatively at short time grinding (30 min). After 45 min of grinding, the sample contained mainly carbonate apatite, quartz and pyrite. On the other hand, dolomite mineral disappeared, while calcite was partially transformed into aragonite. This transformation increased with increasing grinding time. Both Fourier Transform Infrared (FT-IR) and differential thermal analysis (DTA) analyses revealed that remarkable changes in the structural groups have occurred after 45 min of grinding. After 75 min of grinding, the carbonate in the apatite mineral partially decomposed and tricalcium phosphate formed instead. The formation of that simple form (tricalcium phosphate) may be another reason, besides surface area, for increasing the reactivity of phosphate ore by grinding. Scanning electron micrographs (SEM) revealed some idea about the grinding mechanisms of Abu-Tartour phosphate using vibrating mill. They indicate that the different minerals are ground differently. The apatite minerals are ground mostly by abrasion mechanism, while the carbonate minerals are ground mostly by compression. Also, these minerals are ground with different rates, where dolomite is ground faster than calcite, which are referred to the crystal lattice.     

Effects of grain size distribution on mineralogical and chemical compositions: a case study from size‐fractional sediments of the Huanghe (Yellow River) and Changjiang (Yangtze River)

The influence of hydrodynamics on the chemical composition of sediments is based on the uneven distribution of element abundances in different size fractions. In this study, 72 size‐fractional sediments from the Huanghe (Yellow River) and Changjiang (Yangtze River) riverbeds were measured with XRD, SEM, ICP‐AES and ICP‐MS. The analysis results show that the mineral and chemical characteristics change with grain size in the Huanghe and Changjiang sediments. According to the principal components analysis, three independent geochemical factors were found. The first factor elements, Zr, Hf, Th, U, Y, La and TiO₂ are influenced by the existence of heavy minerals. The second factor elements, Al₂O₃, alkalis, alkaline earth (excluding Ca and Sr) and most of the transitional metals are dominated by clay minerals. The third factor group includes Ca and Sr, which were controlled by calcium‐bearing mineral contents and chemical weathering intensities. The various grain size distributions greatly affect the mineralogical and chemical compositions of bulk sediments. Compared to other size fractions, the 5–6PHI size fractions of the Huanghe and Changjiang sediments have special mineralogical and chemical compositions, and intermediate volume percentages. Weight or volume percentage of each size fraction may be more suitable than mean grain‐size of the bulk sediment to elucidate the grain size effects. Chemical Index of Alteration (CIA) values increase steeply with decreasing grain size, while Weathering Index of Parker (WIP) values are relatively stable. Because of the big influence of the abundance of clay minerals on CIA values, it is questionable to use CIA as a proxy of weathering intensity. Considering the clay mineral effects, stability in values and heterogeneous material properties, WIP has the potential to indicate the chemical weathering intensity of sediments. Copyright © 2014 John Wiley & Sons, Ltd.     

福建紫金山铜金矿床中的完整Cu-S体系矿物

在电子探针微区化学成分分析的基础上,结合 X 射线粉末衍射分析,对福建紫金山铜金矿床中的 Cu-S 体系矿物进行 了化学成分和晶体结构特征的研究。结果在该矿床中发现较完整的 Cu-S 体系矿物系列,包括铜蓝、雅硫铜矿、斯硫铜矿、 吉硫铜矿、斜方蓝辉铜矿、蓝辉铜矿、久辉铜矿和辉铜矿。此外,利用粉末 X 射线衍射数据,计算了铜蓝、斜方蓝辉铜矿、 蓝辉铜矿、久辉铜矿、辉铜矿等五种矿物的晶胞参数。基于系统矿物学的研究,建立了紫金山铜金矿床 Cu-S 体系完整矿物 的结晶与变化序列,该工作在国内尚属首次,同时也丰富了 Cu-S 体系矿物基础矿物学研究的资料。     

粉晶X射线衍射法在岩石学和矿物学研究中的应用

X射线衍射是测定物质结构的主要分析手段,广泛应用于物理学、化学、医药学、金属学、材料学、工程技术学、地质学和矿物学。文章综述了粉晶X射线衍射法在造岩矿物、黏土矿物、岩组学、类质同象和结晶度的测定等领域发挥的重要作用。随着测量技术的发展,粉晶X射线衍射在矿物结晶过程中的研究、矿物表面研究、矿物定量相分析和矿物晶体结构测定方面均有新的应用。     

喷流沉积型多金属矿床中镍钼的赋存特征

喷流沉积型矿床是矿床地质学研究的前沿课题,查明矿石中重要组分(镍和钼)的赋存状态是该类矿床地质学研究的重要内容。湘黔地区天鹅山-黄家湾、大坪-大浒镍钼矿带是典型的海底喷流沉积矿床,本文采集该矿区的样品,应用化学和光谱定量分析、偏光显微镜和X射线衍射、扫描电镜、电子探针等大型现代仪器相结合的分析手段,研究了矿石中镍和钼的赋存状态。化学和光谱分析确定矿石中镍含量为3.76％,钼含量为4.99％;偏光显微镜下观察发现金属矿物零星分布,颗粒细小,结晶程度差,光学特征极不明显,晶体形貌特征难以观察,初步推断矿石矿物以胶状形式存在,但在光学显微镜下很难为这些矿物定名和描述;X射线衍射分析验证了偏光显微镜鉴定结果,印证了样品中存在很多非晶质矿物,仅有钨钼钙矿和镍黄铁矿两种矿物含有镍钼,且矿物含量很低(分别为0.4%和0.8%),对比化学分析结果,可推断样品还存在其他富含镍钼元素的矿物。进一步对富集镍钼元素的区域进行电子探针分析,最终确定了镍除了赋存于辉砷镍矿、方硫镍矿中,在胶状黄铁矿和磁黄铁矿边缘呈蠕虫状花边的镍黄铁矿中也有富集;钼主要赋存于碳硫钼矿中。矿石中的镍钼主要赋存于由胶态向结晶态过渡的金属矿物中,研究成果为该类矿床的矿石矿物学研究、选矿、冶炼及矿石综合利用提供重要的信息和依据。     

黄沙坪夕卡岩型多金属矿石中锡的工艺矿物学研究

运用化学分析、X射线衍射分析、化学物相分析、扫描电镜、光学显微镜等手段对黄沙坪夕卡岩型多金属矿石中锡的工艺矿物学特征特别是其赋存状态进行了研究。结果表明:矿区锡主要含在石榴子石夕卡岩型磁铁矿石和夕卡岩型钼矿石中;钙铁榴石和磁铁矿是锡的主要载体矿物,二者晶胞参数随锡含量增大而增大,锡在二者晶体结构中可能以Sn4+置换八面体中的Fe3+;锡的化学物相以石榴子石和磁铁矿结合锡为主,夕卡岩型钼矿石中以"胶态锡"为主,锡石含量较少,粒度较小,解离困难,不具选矿回收价值。     

Mineral matter in coals and their reactions during coking

Degradation of coke in the blast furnace is influenced by its inherent mineral matter, the formation of which is itself dependent upon the nature of the coal mineral matter. To date few studies have been made of coke mineralogy and its relationship to the mineralogy of the parent coal. In this study the effect of carbonisation on coal mineral matter has been investigated by a detailed quantitative mineralogical examination of nine cokes and their parent coals. The quantitative analysis was performed on X-ray diffraction patterns of the mineral matter of cokes and coals, using SIROQUANT^™. Coke mineralogy and its composition varied strongly between cokes, more strongly than variations in elemental composition of the ash. The mineral matter in the studied cokes consisted of crystalline mineral phases and also significant levels of amorphous phase (ranging between 44 and 75%). Decomposition of clays such as kaolinite, montmorillonite, illite and chamosite produced the amorphous phase and some of the crystalline mineral phases such as mullite, γ-alumina, spinel, cristobalite and leucite. The type of association of mineral matter in coals had an important role in how the clays decomposed. For example, association of kaolinite with silica-bearing minerals in intimate intermixture favoured formation of mullite over γ-alumina. Akermanite and diopside result from reaction of kaolinite with associated calcium bearing minerals (calcite, dolomite or ankerite). Quartz, fluorapatite and the three polymorphs of TiO₂ (anatase, brookite and rutile) were the coal minerals that were least affected during carbonisation, as they were also found in the cokes, yet even they were affected in some cases.     

宁夏固原凹陷岩盐矿床后生改造成矿作用—来自矿物学的证据

为深入理解岩盐矿床复合成矿作用,研究宁夏固原凹陷岩盐矿成矿规律和成矿模式,在野外地质调查的基础上,通过镜下观察、扫描电镜分析、电子探针能谱分析、X射线粉晶衍射分析,结合岩石学和矿物学研究,对该矿床矿石结构构造特征和矿物特征进行对比研究,并对其岩盐矿成矿期次进行了划分。结果表明,固原凹陷岩盐矿矿石具有原生沉积和后生改造结构构造。矿石结构中自形细晶结构为原生沉积结构,自形粗晶、港湾和蠕虫交代结构为后生改造结构。矿石构造中纹层、条带、团块状构造为原生沉积构造,块状、角砾状和网脉状构造为后生改造构造。岩盐矿床矿物组合主要有石盐、钙芒硝、硬石膏、无水芒硝以及粘土矿物、钠长石、白云石,具有原生沉积和后生改造的矿物组合特征,盐类矿物均可见原生沉积型和后生改造型矿物。岩相学和矿物学研究证实,固原凹陷岩盐矿床是一个典型的原生沉积-后生改造型矿床。钙芒硝和硬石膏矿主要由早期沉积作用形成矿化体,经历了后期微弱的改造作用;而石盐矿主要由早期沉积作用形成矿体,在后期盆地构造变化中发生塑性流动、溶解-重结晶或构造变形而充填于围岩的裂隙或构造活动形成的有利空间中成矿,表明矿床经历了原生沉积成矿期和后生改造成矿期两个...