Deformation microstructures of olivine in peridotite from Spitsbergen, Svalbard and implications for seismic anisotropy

To understand the deformation mechanism and seismic anisotropy in the uppermost mantle beneath Spitsbergen, Svalbard, in the Arctic, the deformation microstructures of olivine in the peridotite of Spitsbergen were studied. Seismic anisotropy in the upper mantle can be explained mainly by the lattice-preferred orientation (LPO) of olivine. The LPOs of the olivine in the peridotites were determined using electron backscattered diffraction patterns. Eight specimens out of 10 showed that the [100] axis of the olivine was aligned subparallel to the lineation and that the (010) plane was subparallel to the foliation, showing a type A LPO. In the other two specimens the [100] axis of olivine was aligned subparallel to the lineation and both the [010] and [001] axes were distributed in a girdle nearly perpendicular to the lineation, showing a type D LPO. The dislocation density of the olivine in the samples showing a type D LPO was higher than that in the samples showing a type A LPO. The result of an Fourier transformation infrared study showed that both the types A and D samples were dry. These observations were in good agreement with a previous experimental study ( Tectonophysics , 421 , 2006, 1 ): samples showing a type D LPO for olivine were observed at a high stress condition and samples showing both types A and D LPO were deformed under dry condition. Observations of both strong LPOs and dislocations of olivine indicate that the peridotites studied were deformed by dislocation creep. The seismic anisotropy calculated from the LPOs of the olivine could be used to explain the seismic anisotropy of P - and S -waves in the lithospheric mantle beneath Spitsbergen, Svalbard.     

Deformation fabrics of glaucophane schists and implications for seismic anisotropy: the importance of lattice preferred orientation of phengite

ABSTRACT

Strong seismic anisotropy is observed in many subduction zones. This effect is attributed partly to subducting oceanic crust that is transformed into blueschist facies rocks. Because blueschist facies constituents such as glaucophane, epidote, and phengite show strong anisotropic elasticity, seismic anisotropy in subducting oceanic crust can be attributed to the lattice preferred orientation (LPO) of these minerals. We studied the deformation fabrics and seismic properties of phengite-rich epidote–glaucophane schists from the Franciscan Complex of Ring Mountain, California. The samples are composed mainly of glaucophane, epidote, and phengite. Some samples contain abundant phengite, the maximum being 40%. The LPOs of glaucophane showed that the [001] axes are aligned subparallel to lineation, and both (110) poles and [100] axes are aligned subnormal to foliation. The epidote [001] axes are aligned subnormal to foliation, with both (110) and (010) poles aligned subparallel to lineation. The LPOs of phengite are characterized by the maxima of [001] axes subnormal to foliation, and both (110) and (010) poles and [100] axes are aligned in a girdle subparallel to foliation. The phengite showed substantially strong seismic anisotropy (AV_P = 42%, max.AV_S = 37%). The glaucophane schist with abundant phengite showed significantly stronger seismic anisotropy (AV_P = 30%, max.AV_S = 23%) than the epidote–glaucophane schist (AV_P = 13%, max.AV_S = 9%). When the subduction angle of phengite-rich glaucophane schist is considered, the polarization direction of the fast S-waves for vertically propagating S-waves changed to a nearly trench-parallel direction for the subduction angle of 45?60°, and the S-wave anisotropy became stronger for vertically propagating S-waves with increasing subduction angles. Our data showed that phengite-rich blueschist facies rock can therefore contribute to the strong trench-parallel seismic anisotropy occurring at the subducting oceanic crust and at the slab–mantle interface in many subduction zones.     

Lattice-preferred orientation of olivine found in diamond-bearing garnet peridotites in Finsch,South Africa and implications for seismic anisotropy

Seismic anisotropy in the upper mantle provides important constraints on mantle dynamics, continental evolution and global tectonics and is believed to be produced by the flow-induced lattice-preferred orientation (LPO) of olivine. Recent experimental studies at high pressure and temperature have suggested that the LPO of olivine is affected by pressure in addition to water and stress. However, there has been no report yet for the pressure-induced LPO of natural olivine because samples from the deep upper mantle are rare and often unsuitable for study due to ambiguous foliation and lineation. Here we show evidence of the pressure-induced LPO of natural olivine in diamond-bearing garnet peridotites from Finsch, South Africa. We found that the [010] axes of olivine are aligned subnormal to foliation and that the [001] axes are aligned subparallel to lineation, which is known as B-type LPO of olivine. The equilibrium pressure of the samples, as estimated using geobarometer, was greater than 4 GPa, indicating that the samples originated from a depth greater than ∼120 km. In addition, FTIR spectroscopy of the olivine showed that the samples are dry, with a water content of less than 90 ± 20 ppm H/Si (5.5 ± 1.2 ppm wt. H₂O). These data suggest that the samples are the first natural examples of olivine displaying B-type LPOs produced due to high pressure under dry condition. Our data indicate that the trench-parallel seismic anisotropy observed in many subduction zones in and below subducting slabs at depths greater than ∼90 km under dry condition may be attributed to the pressure-induced olivine fabrics (B-type LPO) and may be interpreted as the entrainment of the sub-lithospheric mantle in the direction of subduction rather than anomalous trench-parallel flow.     

Olivine [100] normal to foliation: lattice preferred orientation in prograde garnet peridotite formed at high H<Subscript>2</Subscript>O activity,Cima di Gagnone (Central Alps)

Automated electron backscattered diffraction (EBSD) was applied using a scanning electron microscope to obtain lattice preferred orientation (LPO) data for olivine in garnet peridotites of the Central Alps. As a reference frame, the LPOs of enstatite were also investigated. In the garnet peridotite at Cima di Gagnone (CDG), a weak foliation carrying a distinct lineation is present. The lineation is characterized by elongated enstatite, olivine and poikiloblastic garnet. Olivine shows a very unusual LPO with [100] normal to foliation and [001] parallel to lineation. Achsenverteilungsanalyse (AVA) maps demonstrate that [001] of olivine grains corresponds quite well to their maximum length axes which are preferentially parallel to the lineation. Numerous planar hydrous defects within (001) planes of olivine are marked by palisades of ilmenite rods and show a preferred orientation normal to lineation. Calculated P-wave velocities for CDG are fastest (8.32 km s^у) normal to foliation with a relatively low anisotropy (2.9%). Compared to mantle peridotites with the usual (010)[100] LPO where the fastest Vp direction is towards the lineation, the relationship between flow geometry and seismic anisotropy is significantly different at CDG. Several mechanisms for the formation of the LPO type at CDG are considered, with glide possible on (100)[001] of olivine. On the basis of field data as well as petrographic and petrologic evidence, it has been demonstrated that the CDG garnet peridotite formed by prograde metamorphism from a hydrous protolith at pressures and temperatures of about 3.0 GPa and 750 °C, respectively. The CDG LPO is interpreted to have formed during hydrous subduction zone metamorphism. The same interpretation may hold for the previously investigated olivine LPO at Alpe Arami, which is similar to that at the nearby CDG. The observed anomalous LPO is no proof for ultradeep (>3.0 GPa) conditions.     

南苏鲁芝麻房石榴石橄榄岩中橄榄石的“C”类组构及其形成条件探讨

上地幔地震的各向异性主要归因于橄榄石的优选方位,不同的橄榄石优选方位模式可以作为上地幔不同动力学作用的指示剂。不同应力和含水量条件下的高温变形实验已经确定出五类橄榄石组构模式(“A”型、“B”型、“C”型、“D”型和“E”型)。本文运用电子背散射(EBSD)技术对来自苏鲁超高压变质带南部的芝麻房石榴石橄榄岩的橄榄石进行了优选方位测定,不同变形程度的橄榄石均显示了[100]轴近垂直于面理和[001]轴近平行于线理的特征,为“C”类组构模式,可见组构类型与变形程度没有关系,并且橄榄石组构所显示的NW向SE的剪切指向,与围岩-正、副片麻岩中形成于折返过程的石英优选方位所显示的SE向NW的剪切指向完全不同,说明芝麻房石榴石橄榄岩中橄榄石的“C”类组构是折返前形成的。结合橄榄石结构水的测量和已有的芝麻房石榴石橄榄岩形成的温压条件,推测该组构形成于含水俯冲带中,认为芝麻房石榴石橄榄岩的原岩来自于高含水的上部地幔楔碎块,与俯冲的陆壳物质一起经历了超高压变质作用并最终折返至地表。     

Fabric and seismic properties of carrara marble mylonite

Shear deformation in calcite-rich rocks can produce strong lattice preferred orientations (LPO), which result in a high anisotropy of bulk seismic properties because of the high elastic anisotropy of calcite (32% Vp anisotropy). Deformed rocks often show also strong shape preferred orientations (SPO). Theories for averaging the elastic properties have not yet satisfactorily predicted the contribution to the seismic anisotropy caused by the SPO alone.A calcite mylonite from Carrara (Italy) was investigated, which is characterised by a strong SPO and a weak LPO. It was composed of about 80% calcite, then white mica, quartz and hematite. Flattening of mica and of calcite grains defined the mylonitic foliation, and elongation of calcite grains defined the lineation. On average calcite grains have aspect ratios of about 2.5:1.6:1, and grain sizes of about 10 μm. At 400 MPa confining pressure, the measured Vp (km/s) parallel to the lineation (X direction) was highest (6.63), lower in the intermediate Y direction (6.47); the Vp normal to the foliation (Z direction) was lowest (6.30). This yielded a Vp anisotropy of 5%. The LPO, determined by automated electron backscatter diffraction (EBSD), was very weak (texture index 1.1), with intensities between 0.6 and 1.6 m.r.d. in the c-axis pole figure. Extrapolation of the texture index to an infinite number of orientation measurements indicated that the observed variations were mostly random noise in the orientation distributions and that the bulk rock texture was random. The Vp anisotropy of the Voigt, Reuss and Hill averages calculated from this calcite LPO is predicted to be close to zero. Adding 5% of muscovite with (001) perfectly aligned parallel to the foliation, we calculated a total anisotropy of 2.8%. The anisotropy calculated for the special directions X, Y and Z remained at 2.6% only.It was concluded that the measured seismic anisotropy cannot be explained by the LPO of calcite and by 5% of mica alone. It is also attributed to the strong SPO and to further grain boundary effects.     

Deformation microstructures of olivine and pyroxene in mantle xenoliths in Shanwang,eastern China,near the convergent plate margin,and implications for seismic anisotropy

Deformation microstructures, including lattice-preferred orientations (LPOs) of olivine, enstatite, and diopside, in mantle xenoliths at Shanwang, eastern China, were studied to understand the deformation mechanism and seismic anisotropy of the upper mantle. The Shanwang is located across the Tan-Lu fault zone, which was formed due to the collision between the Sino-Korean and South China cratons. All samples are spinel lherzolites and wehrlites, and LPOs of minerals were determined using scanning electron microscope/electron backscattered diffraction. We found two types of olivine LPO: type-B in spinel lherzolites and type-E in wehrlites. Enstatite showed two types of LPO (types BC and AC), and diopside showed four different types of LPO. Observations of strong LPOs and numerous dislocations in olivine suggest that samples showing both type-B and -E LPOs were deformed in dislocation creep. The seismic anisotropy of the P-wave was in the range of 2.2–11.6% for olivine, 1.2–2.3% for enstatite, and 2.1–6.4% for diopside. The maximum seismic anisotropy of the shear wave was in the range 1.93–7.53% for olivine, 1.53–2.46% for enstatite, and 1.81–6.57% for diopside. Furthermore, the thickness of the anisotropic layer was calculated for four geodynamic models to understand the origin of seismic anisotropy under the study area by using delay time from shear wave splitting, and S-wave velocity and anisotropy from mineral LPOs. We suggest that the seismic anisotropy under the study area can be most likely explained by two deformation modes that might have occurred at different times: one of deformed lherzolites with a type-B olivine LPO by lateral shear during/after the period of the Mesozoic continental collision between the Sino-Korean and South China cratons; and the other deformed the wehrlites with a type-E olivine LPO by horizontal extension during the period of change in absolute plate motion in relation to the westward-subducting Pacific plate.     

Directional dependence of P- and S-wave propagation and polarization in foliated rocks from the Kola superdeep well: Evidence from laboratory measurements and calculations based on TOF neutron diffraction

We have measured P- and S-wave velocities on two amphibolite and two gneiss samples from the Kola superdeep borehole as a function of pressure (up to 600 MPa) and temperature (up to 600 °C). The velocity measurements include compressional (Vp) and shear wave velocities (Vs1, Vs2) propagating in three orthogonal directions which were in general not parallel to inherent rock symmetry axes or planes. The measurements are accompanied by 3D-velocities calculations based on lattice preferred orientation (LPO) obtained by TOF (Time Of Flight) neutron diffraction analysis which allows the investigation of bulk volumes up to several cubic centimetres due to the high penetration depth of neutrons. The LPO-based numerical velocity calculations give important information on the different contribution of the various rock-forming minerals to bulk elastic anisotropy and on the relations of seismic anisotropy, shear wave splitting, and shear wave polarization to the structural reference frame (foliation and lineation). Comparison with measured velocities obtained for the three propagation directions that were not in accordance with the structural frame of the rocks (foliation and lineation) demonstrate that for shear waves propagating through anisotropic rocks the vibration directions are as important as the propagation directions. The study demonstrates that proper measurement of shear wave splitting by means of two orthogonal polarized sending and receiving shear wave transducers is only possible when their propagation and polarization directions are parallel and normal to foliation and lineation, respectively.     

Anisotropic seismic properties of the upper mantle beneath the Torre Alfina area (Northern Apennines, Central Italy)

Central Italy is an active tectonic area that has been recently studied by several regional mantle, Pn and SKS, studies which revealed the presence of a strong regional anisotropy. In this paper, we present the first petrophysical results on the only mantle xenoliths from Central Italy, which place new constraints on the upper mantle structures of this region. The Torre Alfina mantle xenoliths are very small in size, from few millimetres to about 1.5 cm. They are mainly dunites and harzburgites, with subordinate lherzolites and wehrlites. Since olivine and spinel are always present, they should have crystallised in the spinel-bearing lherzolite field. Their mineralogical composition is ol+spl±opx±cpx. Both olivines and pyroxenes are present as porphyroclasts and as neoblasts. The xenoliths show different degrees of recrystallization. Geothermobarometry on these xenoliths give a temperature range of 1040±40 °C and a pressure estimate of about 1.5 GPa, corresponding to 50 to 60 km depth. Previous seismic studies have estimated the Moho to be at 20 to 25 km in this region, hence the xenoliths come from a hot mantle, probably asthenospheric, below a lithosphere of about 25 to 40 km in thickness below the Moho. We measure the crystallographic preferred orientation (CPO) of olivines and pyroxenes using a SEM and the Electron Back Scattered Diffraction (EBSD) technique. The CPO shows all three axes of olivine are tightly clustered: [100] axis is typically more tightly clustered than [010] and [001] is the most widely distributed axis. The fabric strength expressed by the integral J index, varies from 4.5 to 25.9, and decreases with the degree of recrystallization. We use CPO data to calculate anisotropic seismic properties of the xenoliths. They are very homogenous and probably statistically representative of the mantle below the Torre Alfina area. Vp ranges from 8.4 to 9.1 km/s, Vs₁ from 4.8 to 5.0 km/s. The seismic anisotropy is more variable; AVp ranges from 9.8% to 19.3% and AVs from 7.3% to 13.4%. The majority of the xenoliths display an orthorhombic seismic symmetry, but xenoliths with a transverse isotropic behaviour have also been observed.

We consider four geodynamic models for the source region of the xenoliths (extension, shear, upwelling, slab tilted), defined by different orientations of the structural reference frame, and we calculated for each model the variation of the seismic properties with temperature, pressure and volume fraction of orthopyroxene. After comparing this variation of calculated seismic parameters with seismic observations from the region, we form the hypothesis that the xenoliths come from either an extensional tectonic zone (lineation X and foliation plane XY horizontal) or transcurrent shear zone (lineation X horizontal and foliation plane XY vertical) and that the mantle beneath Torre Alfina is composed by 70% olivine and 30% orthopyroxene forming an anisotropic layer of about 160 or 110 km in thickness, respectively.     

苏鲁-大别山超高压变质带迟家店和碧溪岭石榴二辉橄榄岩橄榄石组构

大别山碧溪岭和山东荣成分别发育壳源和幔源的石榴二辉橄榄岩。它们在扬子板块向华北板块的俯冲过程中与俯冲板片一起经历了超高压变质作用。这两种原岩来源不同的石榴橄榄岩中的橄榄石具有相似的结晶学优选方位(LPO):[100]轴主板密垂直于面理面,[010]轴主极密平行于线理,这种橄榄石结晶学优选方位明显不同于高温地幔橄榄岩包体中的橄榄石组构,也不同于最近在超高压变质地体中发现的水导致的橄榄石组构。我们认为碧溪岭和荣成石榴二辉橄榄岩中的这种橄榄石组构可能是在相对较干的超高压变质条件下形成的。本研究为大陆深俯冲超高压变质石榴橄榄岩橄榄石组构特征提供了第一手资料。     

Petrofabrics and seismic properties of garnet peridotite from the UHP Sulu terrane (China): Implications for olivine deformation mechanism in a cold and dry subducting continental slab

Lattice-preferred orientations (LPO) of olivine, diopside, enstatite and garnet from the Zhimafang garnet peridotite body in the Sulu ultrahigh-pressure (UHP) metamorphic terrane (China) were measured using the electron backscatter diffraction (EBSD) technique. The peridotite was captured from a mantle wedge immediately adjacent the subducted Yangtze slab and then experienced the UHP metamorphism at 750–950 °C and 4–7 GPa. The olivine LPO is characterized by the [001] axis close to the stretching lineation and the (100) plane subparallel to the foliation, indicating the prevailing of (100) [001] slip. Enstatite LPO displays the dominance of (100) [001] slip. Diopside developed complex LPO patterns that are difficult to explain using a single slip system of (100) [001]. Garnet is almost randomly oriented due to its low volume fractions, cubic symmetry and the presence of numerous slip systems. Calculated seismic properties of the peridotite yield a maximum P-wave velocity normal to the foliation and a minimum along the foliation, with anisotropy up to 8% in strongly sheared samples. The S-wave velocity pattern is complex but the fast polarization plane generally normal to the foliation. The inferred shear sense from the olivine LPO is top-to-SE, in contrary to exhumation-induced top-to-NW thrusting recorded in the quartz LPO, implying that the olivine LPO formed at early UHP metamorphic conditions. The olivine crystals have relatively low water contents (141–475 H/10⁶ Si), indicating a fluid-deficient environment for the LPO formation. The present study suggests that a combination of low temperature and UHP plays a much more important role than the water content to promote the activation of (100) [001] slip in olivine.     

Mineralogical and seismic properties of serpentinite of Ait Ahmane fault zone of Bou Azzer ophiolite,central Anti-Atlas of Morocco

This paper presents the first seismic measurements of serpentinite of Bou Azzer ophiolite, central Anti-Atlas of Morocco, including seismic velocities and anisotropy. Two serpentinite samples collected from the Ait Ahmane fault zone were analyzed in order to define the mineralogical and seismic features of the natural serpentinite of the Bou Azzer ophiolite. The mineralogical features were investigated using microscopic observation and Raman spectroscopy, while the seismic features were performed using an Electron Backscatter Diffraction (EBSD) instrument. Microscopy and spectroscopy analyses confirmed that the investigated serpentinite suffers from a variable degree of serpentinization, and the antigorite is the dominant variety of serpentine minerals in the study area. The crystal preferred orientation (CPO) results show that the axis [001] of the antigorite deformation is aligned subnormal to the foliation, while the axis [010] is mostly aligned subparallel to the lineation. The seismic anisotropy results are depending on serpentine amount in the rock samples. The sample with a low serpentine amount (30%) shows lowest P- and S-wave anisotropy (Vp = 7.2% and AVs = 6.55%), while the sample with a high amount of serpentine (85%) presents highest P-wave and S-wave anisotropy (Vp = 8.6% and AVs = 11.06%). Consequently, the results indicate that seismic anisotropy increases when increasing the antigorite amount.     

Vp/Vs Anisotropy and Implications for Crustal Composition Identification and Earthquake Prediction

The ratio of P- to S-wave velocities (Vp/Vs) is regarded as one of the most diagnostic properties of natural rocks. It has been used as a discriminant of composition for the continental crust and provides valuable constraints on its formation and evolution processes. Furthermore, the spatial and temporal changes in Vp/Vs before and after earthquakes are probably the most promising avenue to understanding the source mechanics and possibly predicting earthquakes. Here we calibrate the variations in Vp/Vs in dry, anisotropic crustal rocks and provide a set of basic information for the interpretation of future seismic data from the Wenchuan earthquake Fault zone Scientific Drilling (WFSD) project and other surveys. Vp/Vs is a constant (φ0) for an isotropic rock. However, most of crustal rocks are anisotropic due to lattice-preferred orientations of anisotropic minerals (e.g., mica, amphibole, plagioclase and pyroxene) and cracks as well as thin compositional layering. The Vp/Vs ratio of an anisotropic rock measured along a selected pair of propagation-vibration directions is an apparent value (φij) that is significantly different from the value for its isotropic counterpart (φ0). The usefulness of apparent Vp/Vs ratios as a diagnostic of crustal composition depends largely on rock seismic anisotropy. A 5% of P- and S-wave velocity anisotropy is sufficient to make it impossible to determine the crustal composition using the conventional criteria (Vp/Vs<1.756 for felsic rocks, 1.756l.944 fluid-tidied porous/fractured or partially molten rocks) if the information about the wave propagation-polarization directions with respect to the tectonic framework is unknown. However, the variations in Vp/Vs measured from borehole seismic experiments can be readily interpreted according to the orientations of the ray path and the polarization of the shear waves with respect to the present-day principal stress directions (I.e., the orientation of cracks) and the frozen fabric (I.e., foliation and lineation).     

P- and S-wave velocities and densities in silicate and calcite rocks from the Peloritani Mountains, Sicily (Italy): The effect of pressure, temperature and the direction of wave propagation

The Peloritani Mountain Belt (north-eastern Sicily) represents the connection between the Southern Appenninic Range and the Appenninic Maghrebid Chain. The lithotypes outcropping in a 36 km long and approximately 8 km wide area in the eastern part of the Peloritani Mountains are considered to represent most properly the composition of the lower crust. We selected 7 representative samples of silicate rocks (amphibolite, paragneisses, augen gneiss, phyllitic quartzite, pegmatitic rock) and 3 samples of calcite rocks (calc-schist, marbles) for the petrophysical measurements. Measurements were done on sample cubes of dry rocks in a multi-anvil apparatus. Raising of pressure gives rise to velocity increase, but the rate is different in the silicate and calcite rocks and closely related to progressive closure of microcracks. Linear behaviour is approached above about 200 MPa. Increasing temperature at 600 MPa decreases velocities in most silicate and in the calcite rocks with almost linear slopes. Substantial anisotropy of P- and S-wave velocities and shear wave splitting is found in both rock types. The residual anisotropy observed above about 200 MPa is attributed to lattice preferred orientations (LPO) of major minerals. 3D velocity calculations for an amphibolite, a paragneiss and a marble sample based on the LPO of hornblende, biotite and calcite, respectively, confirm the experimental findings of a close relationship between velocity anisotropy, shear wave splitting, shear wave polarization, lattice preferred orientation and the structural frame of the rocks (foliation, lineation). In the silicate rocks, the intrinsic (600 MPa) average P-wave velocities and Poisson's (Vp / Vs) ratios exhibit a tendency for a linear increase with densities, whereas the three calcite rocks cluster at markedly higher P-wave velocities and Poisson's (Vp / Vs) ratios, compared to their densities. In the silicate rocks, there is also a linear trend for an inverse relationship between the SiO₂ content, density and the Poisson's (Vp / Vs) ratio, respectively.     

Plagioclase preferred orientation by TOF neutron diffraction and SEM-EBSD

The lattice preferred orientation (LPO) of an anorthosite (composed of andesine) sampled from a highly deformed anorthositic mylonite (Grenville Province, Quebec) was measured by TOF neutron diffraction and SEM-EBSD. The quantitative texture analysis of neutron data was accomplished by using the Rietveld texture analysis with the WIMV algorithm, implemented in the program package Materials Analysis Using Diffraction (MAUD). The texture calculations of the EBSD data were performed by using the program BEARTEX. Analyses from neutron and electron diffraction data gave similar results if EBSD data are smoothed to account for grain statistics. The principal pole figures show (010) roughly parallel to the rock foliation, (001) poles exhibiting a low angle (25°) to the pole to foliation, and (100) poles close to the Y-direction (perpendicular to the lineation and foliation pole). The [100] crystallographic direction shows a maximum in the lineation direction, [010] directions concentrate near the foliation pole. The geological deformation conditions and the constructed pole figure patterns indicate that the preferred orientation could be attributed to intracrystalline slip dominantly on (010) with [100] as slip direction. Elastic properties, calculated by averaging, document weak anisotropy that has implications for the seismic structure of the lower crust.     

Fabric kinematics of the ultrahigh-pressure metamorphic rocks from the main borehole of the Chinese Continental Scientific Drilling Project: Implications for continental subduction and exhumation

The 5158-m-deep main borehole of the Chinese Continental Scientific Drilling Project (CCSD-MH) penetrated granitic gneisses, paragneisses, eclogites, retrograde eclogites, amphibolites and ultramafic rocks in the Sulu ultrahigh-pressure (UHP) metamorphic terrane, eastern China. The CCSD-MH consists of four petro-structural units separated by three SE-dipping ductile shear zones DFa (835-1280 m), DFb (2010-2280 m) and DFc (2920-3225 m), which are correspondent with the regional shear zones in the northern Sulu UHP supracrustal zone. Using the electron backscatter diffraction (EBSD) technique, we investigated the lattice-preferred orientations (LPOs) of omphacite, diopside and quartz in core samples from the CCSD-MH. Omphacite from eclogites and diopside from garnet pyroxenites display very strong LPOs, which are characterized by the maximum concentration of [001]-axes parallel to the lineation and (010)-poles normal to the foliation. Quartz in para- and granitic mylonites/gneisses from the shear zones DFa, DFb and DFc developed multiple slip systems. ⁴⁰Ar/³⁹Ar dating of biotite in para- and granitic gneisses from the CCSD-MH yields 223-202 Ma, which constrains the formation ages of the quartz high-temperature prism slip systems {m}<a> and {m}[c]. The asymmetric LPOs of omphacite, diopside, olivine and quartz with respect to the structural frame reveal three deformation phases in the Sulu terrane. In the Middle Triassic, the northward subduction of the Yangtze plate to depths > 100 km produced a top-to-the-south shear sense in LPOs of omphacite, diopside and olivine, and a nearly N-S-striking foliation and a subhorizontal N-S-trending lineation in eclogites and ultramafic rocks. In the Late Triassic, the UHP rocks were exhumed to the lower crust and quartz developed high-temperature slip systems with a top-to-the-NW shear sense, which is consistent with the regional SE-dipping foliation and SE-plunging lineation in the ductile shear zones. In the Cretaceous the UHP rocks were exhumed to the middle crust when the migmatization and granitic intrusion formed a NE-striking antiform structure. As a result, the activation of quartz low-temperature basal slip (0001)<a> is characterized by a top-to-the-SE shear sense in the south, but a top-to-the-NW shear sense in the north.     

Elastic properties, fabric and seismic anisotropy of amphibolites and their contribution to the lower crust reflectivity

In this paper the elastic properties of amphibolites from the Serie dei Laghi and the Ivrea zone (Southern Alps, N-Italy) were investigated as a function of their mineralogical composition, microfabric and density.Three orthogonal cores were cut parallel and normal to foliation and lineation; from those, bulk and grain density were measured and the interconnected porosity was calculated. Bulk density varies from 2.75 to 3.07 g/cm³ and calculated porosity ranges from 0.02 to 0.88%.The same cores were also used to measure seismic velocity of ultrasonic waves at room temperature and at increasing confining pressure up to 300 MPa. At high pressure the matrix properties are separated from the crack-induced properties. P-wave velocity varies with respect to the direction of propagation: the slowest direction is always normal to foliation and the fastest parallel to the mineral lineation. The mineral lineation is typically defined by the elongation of amphibole crystals, in which the fastest Vp direction is parallel to the c axis, that is also the elongation axis. The Vp ranges between 6.76 and 7.54 km/s in the direction parallel to lineation and between 6.32 and 7.06 km/s in the direction normal to foliation. This defines a Vp anisotropy of up to 14%, whose shape varies from orthorhombic to axially symmetric (either prolate or flattened). It was observed that both Vp and Vp anisotropy increase with the amount of amphibole and decrease with the amount of plagioclase. Moreover, the c axis distribution of amphiboles is responsible of the Vp anisotropy intensity and shape, in agreement with observations from previous studies. The seismic properties calculated with the approach of Mainprice (1990), using the fabric data, the elastic constants and the modal composition, gave results in good agreement with the measurements.Exposed rocks in the Ivrea and Serie dei Laghi zones show that amphibolites are interlayered with metapelites on a scale from 1 to 100 m. Because of the very large acoustic impedance contrast (20.34 ± 1.75 for amphibolites, 17.16 ± 0.4 for metapelites), they represent a very reflective portion in the middle-lower crust.     

Influence of magnetic fabric anisotropy on seismic wave velocity in paramagnetic granites from NW Himalaya: Results from preliminary investigations

Anisotropy of Magnetic Susceptibility (AMS) and seismic wave velocity studies of some paramagnetic Himalayan granitoids show good correlation between magnetic fabric anisotropy and P wave velocity (Vp). Vp shows strong positive correlation with magnetic lineation (L) and degree of magnetic anisotropy (P′) having correlation coefficient (r) values of 0.93 and 0.89 respectively. Both Vp and Vs show positive correlation with the SiO₂ content of Proterozoic and Paleozoic granitoids. Velocity of S wave (Vs) shows negative correlation with mean magnetic susceptibility (K_m) having ‘r’ value of 0.86. The correlation between Vs-K_m, V_p-P′, V_p-L also shows >95% probability in Spearman’s rank correlation. Based on the results from the present sample size it is suggested that, in paramagnetic granites, V_p is proportional to intensity of deformation and preferred orientation of minerals as well as the mineralogy. On the other hand, Vs is more dependent on the mineralogy alone.     

Oriented growth of garnet by topotactic reactions and epitaxy in high‐pressure,mafic garnet granulite formed by dehydration melting of metastable hornblende‐gabbronorite (Jijal Complex,Kohistan Complex,north Pakistan)

Garnet growth in high‐pressure, mafic garnet granulites formed by dehydration melting of hornblende‐gabbronorite protoliths in the Jijal complex (Kohistan palaeo‐island arc complex, north Pakistan) was investigated through a microstructural EBSD‐SEM and HRTEM study. Composite samples preserve a sharp transition in which the low‐pressure precursor is replaced by garnet through a millimetre‐sized reaction front. A magmatic foliation in the gabbronorite is defined by mafic‐rich layering, with an associated magmatic lineation defined by the shape‐preferred orientation (SPO) of mafic clusters composed of orthopyroxene (Opx), clinopyroxene (Cpx), amphibole (Amp) and oxides. The shape of the reaction front is convoluted and oblique to the magmatic layering. Opx, Amp and, to a lesser extent, Cpx show a strong lattice‐preferred orientation (LPO) characterized by an alignment of [001] axes parallel to the magmatic lineation in the precursor hornblende‐gabbronorite. Product garnet (Grt) also displays a strong LPO. Two of the four 〈111〉 axes are within the magmatic foliation plane and the density maximum is subparallel to the precursor magmatic lineation. The crystallographic relationship 〈111〉_Grt // [001]_Opx,Cpx,Amp deduced from the LPO was confirmed by TEM observations. The sharp and discontinuous modal and compositional variations observed at the reaction front attest to the kinetic inhibition of prograde solid‐state reactions predicted by equilibrium‐phase diagrams. The P–T field for the equilibration of Jijal garnet granulites shows that the reaction affinities are 5–10 kJ mol.^?1 for the Grt‐in reaction and 0–5 kJ mol.^?1 for the Opx‐out reaction. Petrographic and textural observations indicate that garnet first nucleated on amphibole at the rims of mafic clusters; this topotactic replacement resulted in a strong LPO of garnet. Once the amphibole was consumed in the reaction, the parallelism of [001] axes of the mafic‐phase reactants favoured the growth of garnet crystals with similar orientations over a pyroxene substrate. These aggregates eventually sintered into single‐crystal garnet. In the absence of deformation, the orientation of mafic precursor phases conditioned the nucleation site and the crystallographic orientation of garnet because of topotaxial transformation reactions and homoepitaxial growth of garnet during the formation of high‐pressure, mafic garnet‐granulite after low‐pressure mafic protoliths.     

榴辉岩组构运动学与大陆深俯冲——中国大陆科学钻探主孔榴辉岩的EBSD研究

中国大陆科学钻探主孔位于苏鲁超高压带南部的东海县毛北榴辉岩体之上。主孔0-600米深度的榴辉岩的塑性变形以具中等倾角的东倾面理,近南北向的水平拉伸线理、“A”型剪切褶皱和一系列平行面理的微型韧性剪切带为特征。使用电子背散射（EBSD）技术测量的主孔7个榴辉岩样品的石榴石和绿辉石的晶格优选定向（LPO）表明：石榴石基本上无序排列,而绿辉石表现出强烈的LPO。绿辉石的[001]轴近平行于拉伸线理方向,（010）面的法线和[100]轴垂直面理分布,{110}的法线形成垂直面理的环带,反映绿辉石的位错蠕变由[001]（100）和1／2〈^-110〉滑移系控制,其不对称的LPO指示了由北向南的剪切指向。根据单斜辉石的高温实验结果,毛北榴辉岩经历了800-900℃的超高压变质作用。通过构造重塑,揭示毛北榴辉岩体为剪切流变褶皱,形成于扬子板块深俯冲时的超高压变质过程。因此榴辉岩中保留的早期岩石组构特征可以为板块的深俯冲运动学和俯冲极性提供重要信息。