Assessing fertilization success of the coral Montipora capitata under copper exposure: Does the night of spawning matter?

Metal pollution is a major threat in tropical areas due to increasing pressure from anthropogenic activities along coastlines. Unfortunately there are very few toxicological studies that assess the effects of metals on marine organisms in tropical areas. To help fill this gap, this study investigated how Cu alters the fertilization success of the coral Montipora capitata over several nights of spawning. Results indicate that gametes of M. capitata are sensitive to Cu pollution, with EC₅₀ after 3 h ranging from 16.6 to 31.7 μg l^?1. Moreover, the sensitivity of the gametes to Cu toxicity was influenced by the night of spawning during which fertilization experiments were performed. This result likely reflected changes in the quality of gamete over the spawning period.     

Comparative study of top soil magnetic susceptibility variation based on some human activities

An investigation of the effect of some human activities on the magnetic susceptibility and frequency dependent susceptibility was conducted on top soil samples from, a commercial area, a motor park and a school environment in Jalingo, Taraba State, N-E Nigeria. The purpose was to assess the variation of magnetic susceptibility with different land use, detect pollution hotspots using magnetic proxy parameters and evaluate the contribution of superparamagnetic (SP) grain size contribution to the magnetic susceptibility from calculation of the frequency dependence of magnetic susceptibility (MS). The results of the mass specific low frequency magnetic susceptibility measurements showed significant enhancement with values ranging from 67.8 − 495.3 × 10⁻⁸ m³kg⁻¹ with a mean value of 191.61 × 10⁻⁸ × m³kg⁻¹ for the Jalingo College of Education (JCOE) data; 520.1 − 1612.8 × 10⁻⁸ m³kg⁻¹ with a mean value of 901.34 × 10⁻⁸ m³kg⁻¹ for the Jalingo main Market (JMM) and 188.5 − 1203.6 × 10⁻⁸m³kg⁻¹ with an average value of 574 92 × 10⁻⁶ m³kg⁻¹ for the Jalingo Motor Park (JMP). The significant magnetic enhancement indicates high concentration of ferrimagnetic minerals in the soil and hence increased pollution. The magnetic susceptibility of the different land use studied decreased in the order commercial area (market) > motor park > school premises. The results of the percentage frequency dependence susceptibility showed that most of the samples had a mixture of SP and coarse multi domain grains or SP grains < 0.05 µm. The value of χ_fd% range from 2.68 to 13.80% with an average value of 8.67% in the JCOE samples, 0.49 to 10.04% with an a-verage of 5.05% in the JMM samples and 0.56 to 13.04% with an average value of 5.86% in the JMP samples.     

Content and distribution of trace metals in surface sediments from the northern Bering Sea,Chukchi Sea and adjacent Arctic areas

Concentrations of trace metals (Zn, Cr, Cu, V, Cd and Pb), total organic carbon (TOC), black carbon (BC) and their granulometry were examined in 25 surface sediment samples from the northern Bering Sea, Chukchi Sea and adjacent areas. Trace metal concentrations in the sediments varied from 21.06–168.21 mg kg⁻¹ for Zn, 8.91–46.94 mg kg⁻¹ for Cr, 2.69–49.39 mg kg⁻¹ for Cu, 32.46–185.54 mg kg⁻¹ for V, 0.09–0.92 mg kg⁻¹ for Cd, and 0.95–15.25 mg kg⁻¹ for Pb. The geoaccumulation index (I_geo) indicated that trace metal contamination (Zn and Cd) existed in some stations of the study area. The distribution of grain size plays an important role in influencing the distribution of trace metals (Zn, Cr, Cu, V, and Pb) in sediments from the Chukchi Sea and adjacent areas.     

Magnetic survey of topsoils in Windsor–Essex County,Canada

Windsor–Essex County is a major cross-border truck and transportation route, with significant localized industrialization as well as rural and farming areas. Magnetic property measurements (in-field and laboratory susceptibility, frequency-dependent susceptibility, hysteresis properties, thermomagnetic and thermosusceptibility curves, anhysteretic and isothermal magnetizations) were made in order to determine the potential for using such variables to distinguish between natural and anthropogenic pollutants. In-field magnetic susceptibility measured on 324 soil sampling sites on a 0.5–2 km grid spacing through Windsor–Essex County ranged from 3.7 × 10^− 6 to 305.2 × 10^− 6 SI (average 36.2 ± 35.8 × 10^− 6 SI), and showed that high magnetic susceptibility values were obtained on soil sampling sites in and around the cities/towns of Windsor, Harrow, Olinda and Oakland and near the beaches of Point Pelee National Park (PPNP) and Deerbrook, whereas lower susceptibility values were observed in near the towns of Lakeshore and Essex. On this grid spacing, Highway 401 (the major truck route) did not show anomalous susceptibility values; however, closer (1–3 m) sampling on other roads did show anomalously high values, suggesting that the coarser grid spacing may have missed anomalies. Laboratory measurements indicated that the dominant magnetic mineral in the Windsor–Essex County soils is magnetite; however, the grain size is variable. Pseudo-single domain (PSD)–multidomain (MD) magnetite is generally found on beaches and in PPNP, whereas single domain (SD)–PSD magnetite has been found near the City of Windsor and other towns. While certain correlations exist between some anthropogenic activities and the measured magnetic susceptibility and magnetic property values, no overall correlation can be made. A variety of geologic and anthropogenic factors must be considered when interpreting the origin of the magnetic signal in a particular area.     

Tidally-induced sediment transport patterns in the upper Bay of Fundy: A numerical study

The Minas Basin, the eastern end of the Bay of Fundy, is well known for its high tide ranges and strong tidal currents, which can be exploited to extract electricity power. The properties of the tidally-induced sediment transport in the Minas Basin, where significant changes in tidal processes may occur due to a recently proposed tidal power project, have been studied with a three-dimensional hydrodynamic model, an empirical bed load sediment transport model and surface sediment concentrations derived from the remotely-sensed images. The hydrodynamic model was evaluated against independent observational data, which include tidal elevation, tidal current (in the full water column and bottom layer), residual current profile and tidal asymmetry indicators. The evaluation shows that the model is in good agreement with the observations.The sediment transport includes two components, bed load and suspended particulate load. The bed load is calculated using the modelled bottom shear stress and the observed grain size data. The estimated features of bed load transport roughly agree with the observed patterns of the erosion and deposition in the Minas Basin and Cobequid Bay. The transport of the suspended load is estimated using the modelled velocity fields and the surface sediment concentration derived from remote-sensing images. The comparisons between the modelled results and the limited observations illustrate that the observed directions of suspended sediment transport are basically reproduced by the model. The modelled net suspended sediment input into the Minas Basin through Minas Passage is 2.4×10⁶ m³ yr^?1, which is comparable to the observed value of 1.6×10⁶ m³ yr^?1.The variations of the bed load and the suspended load in space and time are also presented. The total net transport, defined as the mean value of the sum of bed and suspended load transports during the tidal cycle, shows strong spatial variability. The magnitude of the transport flux ranges from 0.1 to 0.2 kg m^?1 s^?1 in Minas Channel and Minas Passage, 0.1 kg m^?1 s^?1 in Cobequid Bay, to 0.01 kg m^?1 s^?1 in the central Minas Basin and Southern Bight. In Minas Channel, the sediment transport follows the structure of the tidal residual circulation, which features a large anticlockwise gyre. The sediment in Minas Passage moves eastward and deposits into the central Minas Basin. However, the sediment from the eastern part of the Basin moves westward and deposits in the central Minas Basin as well. In the Cobequid Bay, sediment moves eastward and deposits in the upper bay.     

Quantities,composition, and sources of beach debris in Korea from the results of nationwide monitoring

This study assessed the levels of marine debris pollution and identified its main sources in Korea. The surveys were bimonthly conducted by NGO leaders and volunteers on 20 beaches from March 2008 to November 2009. The quantities of marine debris were estimated at 480.9 (±267.7) count ⋅ 100 m⁻¹ for number, 86.5 (±78.6) kg ⋅ 100 m⁻¹ for weight, and 0.48 (±0.38) m³ ⋅ 100 m⁻¹ for volume. The level of marine debris pollution on the Korean beaches was comparable to that in the coastal areas of the North Atlantic ocean and South Africa. Plastics and styrofoam occupied the majority of debris composition in terms of number (66.7%) and volume (62.3%). The main sources of debris were fishing activities including commercial fisheries and marine aquaculture (51.3%). Especially styrofoam buoy from aquaculture was the biggest contributor to marine debris pollution on these beaches.     

Development of the sediment and water quality management strategies for the Salt-water River,Taiwan

The Salt-water River watershed is one of the major river watersheds in the Kaohsiung City, Taiwan. Water quality and sediment investigation results show that the river water contained high concentrations of organics and ammonia–nitrogen, and sediments contained high concentrations of heavy metals and organic contaminants. The main pollution sources were municipal and industrial wastewaters. Results from the enrichment factor (EF) and geo-accumulation index (I_geo) analyses imply that the sediments can be characterized as heavily polluted in regard to Cd, Cr, Pb, Zn, and Cu. The water quality analysis simulation program (WASP) model was applied for water quality evaluation and carrying capacity calculation. Modeling results show that the daily pollutant inputs were much higher than the calculated carrying capacity (1050 kg day⁻¹ for biochemical oxygen demand and 420 kg day⁻¹ for ammonia–nitrogen). The proposed watershed management strategies included river water dilution, intercepting sewer system construction and sediment dredging.     

Distribution,inventory and turnover of benthic organic biomass in the Strait of Georgia,Canada, in relation to natural and anthropogenic inputs

Recently compiled databases facilitated estimation of basin-wide benthic organic biomass and turnover in the Strait of Georgia, an inland sea off western Canada. Basin-wide organic biomass was estimated at 43.1 × 10⁶ kg C and production was 54.6 × 10⁶ kg C yr⁻¹, resulting in organic biomass turnover (P/B) of 1.27 × yr⁻¹. Organic biomass and production for sub-regions were predictable from modified organic flux (r² > 0.9). P/B declined significantly with increasing modified organic flux, suggesting greater biomass storage in high flux sediments. Biomass and production were highest, and P/B lowest near the Fraser River. Annual basin-wide benthic production was 60% of previously estimated oxidized organic flux to substrates, which agrees with proportional measurements from a recent, localized study.Deviations from expected patterns related to organic enrichment and other stressors are discussed, as are potential impacts to benthic biomass and production, of declining bottom oxygen, increasing bottom temperature and potential changes in riverine input.     

Selected trace metals (As,Cd and Hg) distribution and contamination in the coastal wetland sediment of the northern Beibu Gulf,South China Sea

Contamination with As, Cd and Hg, their spatial and temporal distribution are reported from the coastal wetland sediments of the northern Beibu Gulf, South China Sea. The content of As, Cd, Hg and TOC in surface sediments is 8.1 ± 5.8 μg g^?1, 0.08 ± 0.14 μg g^?1, 0.034 ± 0.028 μg g^?1 and 0.45 ± 0.39%, respectively. The mean sedimentation rates are 0.93–1.37 cm year^?1 during 1920s to 2008 determined by ²¹⁰Pb and ¹³⁷Cs dating in three cores. The vertical profiles of As, Cd and Hg content in the cores retrieved from Qin and Nanliu River estuaries show increasing trends during 1985–2008 due to anthropogenic impact caused by local economic development. Locally the surface sediments have potential ecological risk of As to benthos according to the NOAA sediment quality guidelines.     

Arsenic and heavy metals in native plants at tailings impoundments in Queretaro,Mexico

Ten native plants species that grow in three tailings dams from Ag, Pb, Cu and Zn mine in Queretaro, Mexico were studied. Total concentrations in tailings were 183–14,660 mg/kg As, 45–308 mg/kg Cd, 327–1754 mg/kg Pb, 149–459 mg/kg Cu and 448–505 mg/kg Zn. In the three tailings dams, the solubility of these elements is low. Tailings in dam 1 are acid generating while tailings in dams 2 and 3 are not acid-generating potential. Plants species that accumulate arsenic and heavy metals was identified; Nicotina glauca generally presented the highest concentrations (92 mg/kg As, 106 mg/kg Cd, 189 mg/kg Pb, 95 mg/kg Cu and 1985 mg/kg Zn). Other species that accumulate these elements are Flaveria pubescens, Tecoma stans, Prosopis Sp, Casuarina Sp and Maurandia antirrhiniflora. Two species were found that accumulates a large amount of metals in the root, Cenchrus ciliaris and Opuntia lasiacantha. Concentrations in soils in which plants grow were 488–5990 mg/kg As, 5–129 mg/kg Cd, 169–3638 mg/kg Pb, 159–1254 mg/kg Cu and 1431–13,488 mg/kg Zn. The Accumulation Factor (AF) determined for plants was less than 1, with exception of N. glauca for Cd. The correlation between arsenic and heavy metals found in soils and plants was low. Knowledge of plant characteristics allows it use in planning the reforestation of tailings dams in controlled manner. This will reduce the risk of potentially toxic elements are integrated into the food chain of animal species.     

Remediation studies of trace metals in natural and treated water using surface modified biopolymer nanofibers

In this study, remediation results of trace metals in natural water and treated water using three functionalized nanofiber mats of cellulose and chitosan are reported. The nanofiber materials, packed in mini-columns, were employed for the remediation of five toxic trace metals (Cd, Pb, Cu, Cr and Ni) from natural water samples. Trace metals in real water samples were undetectable as the concentrations were lower than the instrument’s detection limits of 0.27 × 10⁻³ (Cd) and 4.2 × 10⁻² (Pb) μg mL⁻¹, respectively. However, after percolation through the functionalised biosorbents in cartridges, detectability of the metal ions was enhanced. The starting volume of the natural water sample was 100 mL, which was passed through a column containing the nanofibers sorbent and the retained metals eluted with 5 mL of 2.0 M nitric acid. The eluate was analyzed for metals concentrations. An enrichment factor of 20 for the metals was realized as a result of the pre-concentration procedure applied to handle the determination of the metals at trace levels. The order of remediation of the studied metals using the nanofibers was as follows: chitosan/PAM-g-furan-2,5-dione < cellulose-g-furan-2,5-dione < cellulose-g-oxolane-2,5-dione. The modified biopolymer nanofibers were able to adsorb trace metals from the river water and treated water, thereby confirming their capability of water purification. These materials are proposed as useful tools and innovative approach for improving the quality of drinking for those consumers in small scale households.     

Vertical and horizontal distribution of magnetic susceptibility and metal contents in an industrial district of central Iran

This study was conducted to determine the vertical and horizontal distribution of selected metals and magnetic susceptibility (χlf) in an industrial site located in Isfahan province, central Iran. For this purpose, we used a grid sampling methodology and excavated 202 profiles. Soil samples were then collected from 0–30, 60–90, and 120–150 cm depths. The mass magnetic susceptibility (χ) of the soil samples was measured at both low and high frequencies (χlf and χhf) using the Bartington MS2 dual frequency sensor; and χfd was also calculated. Soil samples were also analyzed for iron (Fe), manganese (Mn), lead (Pb), zinc (Zn), copper (Cu), nickel (Ni), chromium (Cr) and cobalt (Co) concentrations. The results showed that there were positive significant correlations among selected metals including Zn, Pb, Fe and Mn, which were mainly added through coal fly ash from an iron smelting factory at the studied site, while the concentration of Ni, Cr and Co was mainly controlled by the parent material of the soils. The trends in results at the site of study were similar in vertical and horizontal distribution for the industrial originated metals as judged by pollution load index (PLI) using χlf. The results of SEM/EDX also confirmed the presence of spheroid of magnetic particles in the surface soil samples taken in close proximity of the factory. Based on the results using the contamination factors (CF) determined for selected metals, the following order was observed: Pb > Zn > Mn > Fe > Cu > Ni ≥ Co > Cr. The results also suggested that magnetic methods could be used to estimate the metal contamination from anthropogenic sources in industrial soils.     

Modelling the influence of thermal discharge under wind on algae

Wind-driven processes exert an important impact on aquatic ecosystems, especially on shallow reservoirs. Flow and heat transport under wind in the Douhe reservoir in China were simulated by a two-dimensional mathematical model. Areas corresponding to different temperature rises were calculated for different wind speed conditions with high frequency. It is shown that high temperature rise areas increase for maximum wind speed conditions while low temperature rise areas keep constant for various wind speed conditions. The concentration of Chl.a decreases with the increase of wind speed, indicating that low wind speed is suitable for algae blooming in the Douhe reservoir. The effects of wind on Bacillariophyta biomass growth become more obvious with the increase of temperature rise areas. The influenced areas of lower temperature rise (0.2–1.49 °C) and higher temperature rise (1.5–2 °C) zone are 8.57 × 10⁶ m² and 5.18 × 10⁶ m², respectively, and corresponding total variation amounts of Bacillariophyta biomass are 2.24 × 10⁵/m² and 0.42 × 10⁵/m², respectively. Results show that wind has a significant impact on ecological effects due to thermal discharge from thermal power plant into shallow reservoirs.     

Noctilucent cloud in the western Arctic in 2005: Simultaneous lidar and camera observations and analysis

We report observations of a noctilucent cloud (NLC) over central Alaska by a ground-based lidar and camera on the night of 9–10 August 2005. The lidar at Poker Flat Research Range (PFRR), Chatanika (65°N, 147°W) measured a maximum integrated backscatter coefficient of 2.4×10^?6 sr^?1 with a peak backscatter coefficient of 2.6×10^?9 m^?1 sr^?1 corresponding to an aerosol backscatter ratio of 120 at an altitude of 82.1 km. The camera at Donnelly Dome, 168 km southeast of PFRR, recorded an extensive NLC display across the sky with distinct filamentary features corresponding to wave structures measured by the lidar. The occurrence of the maximum integrated backscatter coefficient corresponded to the passage of a bright cloud band to the southwest over PFRR. The camera observations indicate that the cloud band had a horizontal width of 50 km and a length of 150 km. The horizontal scale of the cloud band was confirmed by medium-frequency radar wind measurements that reported mesopause region winds of 30 m/s to the southwest during the period when the cloud band passed over PFRR. Comparison of these measurements with current NLC microphysical models suggests a lower bound on the water vapor mixing ratio at 83 km of 7–9 ppmv and a cloud ice mass of 1.5–1.8×10³ kg. Satellite measurements show that this NLC display occurred during a burst of cloud activity that began on 5 August and lasted for 10 days. This cloud appeared 10 days after a launch of the space shuttle. We discuss the appearance of NLCs in August over several years at this lower polar latitude site in terms of planetary wave activity and space shuttle launches.     

Lightning electrical characteristics during tropical summer thunderstorm in North-East India

The preliminary results of observation of the lightning electrical characteristics during tropical summer thunderstorms locally known as “Nor-Wester”, at a hilly place in North-East India (23.50°N, 91.25°E) are reported here. Some distinct peaks are observed in the VLF range between 1.5 to 6 kHz. Average cloud conductivity is found to be 8.12×10^?10 S m^?1. Specific characteristics of integrated field intensity of sferics (IFIS) at 14 and 17 kHz are also studied. Average enhancement of electrical activity during thunderstorms is found to be 170 dB kHz^?1 compared to the normal weather sferics intensity.     

Optical signatures of dissolved organic matter in the watershed of a globally large river (Yangtze River,China)

Parallel factor analysis of fluorescence excitation emission matrices of surface water samples of a globally large river (Yangtze River, China) watershed identified three classes of fluorescent dissolved organic matter (FDOM) that had ex/em = 280/330 nm, 305/385 nm and 350/450 nm respectively, resembling “peak T”, “peak M” and “peak C” commonly identified in natural water, respectively. Peak T (a tyrosine/tryptophan-like FDOM) did not show correlations to peak M or C which were humic-like substances, while a positive correlation (r = 0.935, p < 0.001) was present between the natural log-transformed maximum fluorescence intensity (F_max) of peaks T and M indicating a tight link during their production and processing. F_max values (in Raman unit nm^?1) normalized to dissolved organic carbon (DOC) concentration were low, varying in ranges 15.93–85.95, 29.83–83.54 and 19.73–51.05 × 10^?5 nm^?1 (μmol/L)^?1 for peaks T, M and C, respectively, in line with the history of strong photobleaching of the water samples as indicated by fairly high absorption spectral slope ratios (0.75–1.53 with a mean 1.03). Intermediate fluorescence index (FI) (1.46–1.83 with a mean 1.61) and small specific absorption at 254 nm (0.64–1.93 with a mean 1.15 m^?1 mg^?1 L) of the water samples, indicated the presence of both aquatic microbial DOM (e.g. peak T) and soil DOM (e.g. peak C). Peak C could be substantially removed by UV-A (320–400 nm) irradiation, while peak M was slightly increased when a microbe-containing water was exposed to the same UV-A irradiation. Taken together, peak C was attributed to diffuse soil source while peak M was likely attributed to joint effects of microbial activities and solar irradiation on the chromophores in the sample.     

Evaluation of the 87Rb decay constant by age comparison against the U–Pb system

The Rb–Sr decay system is one of the most widely used geochronometers for obtaining ages and cooling rates of terrestrial magmatic, metamorphic, and hydrothermal events. It has also been extensively applied to date extraterrestrial, early solar system events. The accuracy of Rb–Sr ages, however, strongly depends on the accuracy of the ⁸⁷Rb decay constant (λ⁸⁷Rb). We determined λ⁸⁷Rb relative to the decay constants of ²³⁵U and ²³⁸U by comparing Rb–Sr ages of minerals with U–Pb ages obtained from the same intrusion. Comparison of U–Pb emplacement ages with high-precision Rb–Sr mineral ages from three rapidly cooled igneous rocks covering an age range of ca. 2.5 Ga yields an unweighted mean λ⁸⁷Rb of 1.393 ± 0.004 × 10^?11 yr^?1 (i.e., ± 0.3%), corresponding to a half-life of 49.76 × 10⁹ years. Because this decay constant is 2% lower than the presently recommended one, many previously published ages are 2% too young and the resulting geologic interpretations may need revision.     

Removal of heavy metals from contaminated water using ethylenediamine-modified green seaweed (Caulerpa serrulata)

The demand for clean water is on the increase as the population increases. One of the ways to address the water shortage is to treat the polluted water through removal of the contaminants. The use of adsorbents for pollutant removal is one of the promising methods. Seaweed is an aquatic plant and its sorption ability for selected metals in water was investigated in this study. We report the performance of the seaweed (Caulerpa serrulata) before and after modification with ethylenediamine (EDA), on adsorption of copper, lead and cadmium in aqueous solution. The adsorption capacities for Cu, Cd and Pb were 5.27 mg g⁻¹, 2.12 mg g⁻¹ and 2.16 mg g⁻¹, respectively, with the EDA-modified seaweed, and 3.29 mg g⁻¹, 4.57 mg g⁻¹ and 1.06 mg g⁻¹, with the unmodified weed, respectively. The pH for maximum adsorption was found to be within the range of pH 4–pH 6. In a separate investigation, it was found that 0.1 g of dried seaweed leached 20 mg of dissolved organic carbon (DOC) using 100 ml of distilled-deionised water. The resulting solution was green. The leaching phenomenon contributes to secondary pollution. Modification of the seaweed with EDA reduced the DOC content by half (50%) and also removed the green colouration. Kinetic studies showed that the adsorbent was able to take up to 95% of the metals (in synthetic standard solutions) in less than 10 min. The adsorbed metals were then stripped using a solution of 0.5 M HNO₃ indicating that the adsorbent can be regenerated. In addition, the study revealed that modification improved the thermal stability of the adsorbent such that even when the temperature was raised to 1000 °C, more than 80% (compared to <50% for unmodified weed) of the modified adsorbent was not degraded, indicating that modification had a significant influence on the thermal stability of seaweed. The modified seaweed has been shown to have great potential for the removal of metals and DOC in polluted water. The modified adsorbent can therefore be applied for the removal of metals in polluted waters hence suitable for treatment of water for domestic consumption at a point of use.     

Osmium isotope and highly siderophile element systematics of the lunar crust

Coupled ¹⁸⁷Os/¹⁸⁸Os and highly siderophile element (HSE: Os, Ir, Ru, Pt, Pd, and Re) abundance data are reported for pristine lunar crustal rocks 60025, 62255, 65315 (ferroan anorthosites, FAN) and 76535, 78235, 77215 and a norite clast in 15455 (magnesian-suite rocks, MGS). Osmium isotopes permit more refined discrimination than previously possible of samples that have been contaminated by meteoritic additions and the new results show that some rocks, previously identified as pristine, contain meteorite-derived HSE. Low HSE abundances in FAN and MGS rocks are consistent with derivation from a strongly HSE-depleted lunar mantle. At the time of formation, the lunar floatation crust, represented by FAN, had 1.4 ± 0.3 pg g^? 1 Os, 1.5 ± 0.6 pg g^? 1 Ir, 6.8 ± 2.7 pg g^? 1 Ru, 16 ± 15 pg g^? 1 Pt, 33 ± 30 pg g^? 1 Pd and 0.29 ± 0.10 pg g^? 1 Re (～ 0.00002 × CI) and Re/Os ratios that were modestly elevated (¹⁸⁷Re/¹⁸⁸Os = 0.6 to 1.7) relative to CI chondrites. MGS samples are, on average, characterised by more elevated HSE abundances (～ 0.00007 × CI) compared with FAN. This either reflects contrasting mantle-source HSE characteristics of FAN and MGS rocks, or different mantle–crust HSE fractionation behaviour during production of these lithologies. Previous studies of lunar impact-melt rocks have identified possible elevated Ru and Pd in lunar crustal target rocks. The new results provide no supporting evidence for such enrichments.If maximum estimates for HSE in the lunar mantle are compared with FAN and MGS averages, crust–mantle concentration ratios (D-values) must be ≤ 0.3. Such D-values are broadly similar to those estimated for partitioning between the terrestrial crust and upper mantle, with the notable exception of Re. Given the presumably completely different mode of origin for the primary lunar floatation crust and tertiary terrestrial continental crust, the potential similarities in crust–mantle HSE partitioning for the Earth and Moon are somewhat surprising. Low HSE abundances in the lunar crust, coupled with estimates of HSE concentrations in the lunar mantle implies there may be a ‘missing component’ of late-accreted materials (as much as 95%) to the Moon if the Earth/Moon mass-flux estimates are correct and terrestrial mantle HSE abundances were established by late accretion.     

PAHs contamination and bacterial communities in mangrove surface sediments of the Jiulong River Estuary,China

Sixteen sediment samples collected from eight transects in a mangrove swamp of the Jiulong River Estuary, Fujian, China were investigated for their content of polycyclic aromatic hydrocarbons (PAHs) and the biodegradation potential of the indigenous microorganisms. The bacterial community structures in the mangrove sediments and in enrichment cultures were also investigated. The results showed that the total PAHs concentration of mangrove sediments ranged from 280 to 1074 ng g⁻¹ dry weight, that the PAHs composition pattern in the mangrove sediments was dominated by high molecular weight PAH components (4–6 rings), and that Benzo[ghi]perylene and Indeno[1,2,3-cd]pyrene were the most dominant at different stations. Abundant PAH-degrading bacteria were found in all the stations, the values of phenanthrene-degrading bacteria ranged from 5.85 × 10⁴ to 7.80 × 10⁵ CFU g⁻¹ dry weight, fluoranthene-degrading bacteria ranged from 5.25 × 10⁴ to 5.79 × 10⁵ CFU g⁻¹ dry weight, pyrene-degrading bacteria ranged from 3.10 × 10⁴ to 6.97 × 10⁵ CFU g⁻¹ dry weight and the benzo(a)pyrene-degrading bacteria ranged from 5.25 × 10⁴ to 7.26 × 10⁵ CFU g⁻¹ dry weight. DGGE analysis of PCR-amplified 16S rDNA gene fragments confirmed that there was a remarkable shift in the composition of the bacterial community due to the addition of the different model PAH compound phenanthrene (three ring PAH), fluoranthene(four ring PAH), pyrene(four ring PAH) and benzo(a)pyrene(five ring PAH) during enrichment batch culture. Eleven strains were obtained with different morphology and different degradation ability. The presence of common bands for microbial species in the cultures and in the native mangrove sediment DNA indicated that these strains could be potential in situ PAH-degraders.