渤海湾盆地深层石油地质条件分析

比较系统的对渤海湾盆地深层烃源岩分布、特征及生烃潜力、储集层类型、特征及其深层储层的储集性能纵向和平面变化规律进行了初步分析,并对深层油气的保存条件、深层圈闭条件及成藏配套史等进行了讨论,总体对渤海湾盆地深层石油地质条件有了一个较为全面的认识。     

Characterization of hydrocarbon-bearing fluid inclusion in sandstones of Jaisalmer basin, Rajasthan: A preliminary approach

The quartz grains from the sandstone of Jaisalmer, Pariwar and Goru Formations of the Jaisalmer basin, Rajasthan, India, exhibits a variety of primary and secondary fluid inclusions. Most of them are hydrocarbon bearing fluid inclusions. Laser Raman studies indicate that the primary fluid inclusions were mostly having aliphatic hydrocarbons with lower degree of maturity, while the secondary fluid inclusions were generally with aliphatic as well as aromatic hydrocarbons with higher degree of maturity. This inference was consistent with their fluorescence characteristics. The homogenization temperatures of primary monophase CH₄ rich fluid inclusions varied from ?80°C to ?100°C, whereas the primary biphase fluid inclusions (CH₄-CO₂) homogenized between +80°C and +150°C. The secondary petroleum rich monophase fluid inclusions were having homogenization temperature between ?80°C to ?90°C, whereas the secondary biphase fluid inclusions homogenized between +130°C and +180°C. Most of the secondary biphase fluid inclusions were having the mixtures of H₂O-CO₂-NaCl, and were identified on the basis clathrate formation and they got homogenized between +140°C and + 250 °C. The three past events of migration of petroleum inferred in the host rock which were marked by the presence of characteristic secondary fluid inclusions. They were identified on the basis of cross-cutting relationships of different trails of fluid inclusions in the quartz. The cement generation in the basin might have been occurred in two stages as per the fluid inclusion petrography.     

Fluorite deposits at Encantada–Buenavista, Mexico: products of Mississippi Valley type processes

Petroleum and aqueous fluid inclusions from the Encantada–Buenavista fluorite mineralized zone in northern Mexico were analyzed by microthermometry, UV fluorescence, Raman Spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR) and Confocal Scanning Laser Microscopy (CSLM) to evaluate the geochemical evolution of the mineralizing fluids. Two-phase (petroleum or brine+vapor) and three-phase (petroleum+brine+vapor) inclusions are described. Aqueous and petroleum-rich inclusions commonly occur in the same plane. Vapor-decrepitated and stretched fluid inclusions are present. A low-salinity methane-saturated fluid and a high salinity-fluid with highly variable methane contents are recognized. H₂S is not quantified but is always detected in close association with methane. Petroleum inclusions are of two types: a low methane petroleum fluid (20 mol%) with low T_h (60 °C) and a petroleum fluid with a methane of content near 30 mol% and a T_h of 90 °C.Pressure and temperature diagrams for the aqueous and petroleum inclusions show three main intersects that allow P–T–X reconstruction of fluid evolution at La Encantada–Buenavista. A CH₄- and H₂S-rich low-salinity brine was mixed with oil that migrated under hydrostatic conditions with a thermal gradient of 70 °C/km. The arrival and mixing of a high-salinity aqueous fluid produced overpressure to 300 bars. A return to hydrostatic conditions was accompanied by an increase in the thermal gradient.The brine related to the fluorite orebodies appears to have a genetic relationship with the brines reported from the Jurassic petroleum basins located west of the fluorite bodies and similarities with reported fluids from Mississippi Valley type deposits. It is interpreted that the fluorine-rich fluids migrated toward the platform margins during the mid-Tertiary (30 to 32 Ma) using extension zones related to Basin and Range tectonism. Mixing of two different brines was responsible for precipitation and mineralization. Heat from magmas, related to tectonic extension, caused decrepitation and changes in the shape of fluid inclusions near the contact zones.     

Distribution Characteristics of Effective Source Rocks and Their Control on Hydrocarbon Accumulation: A Case Study from the Dongying Sag, Eastern China

The exploration conducted in the Bohai Bay basin, eastern China has demonstrated that the abundant petroleum resources have close affinities to the hydrocarbon kitchen with rich organic matter. A number of oil-generating associations with various characteristics of organic geochemistry and assemblages of multiple reservoir facies are developed due to the multi-center sedimentation, multi-source supply and multi-cycle evolution of filling, which have resulted in the formation of multiple oil and gas accumulation zones of various layers and trap styles. Among them the Paleogene Shahejie Formation is the most important hydrocarbon accumulation combination in the Dongying sag. Heretofore, its proved reserve has reached nearly 1.8×109t, which accounts for more than 90% of the total proved reserves of the Dongying sag. Based on previous studies, more than 600 source rock samples and 186 crude oil samples of the Shahejie Formation, collected from 30 oilfields, have been treated with organic geochemical testing     

Hydrocarbon migration in the Zagros Basin,offshore Iran,for understanding the fluid flow in the Oligocene–Miocene carbonate reservoirs

Kuh-e Mond Field is a conventional heavy oil resource in the Zagros foreland Basin, Iran, produced from the fractured carbonates partially filled by dolomite, calcite, and anhydrite cement. Vitrinite reflectance data from carbonate reservoir suggest low-maturation levels corresponding to paleotemperatures as low as 50 °C. The observed maturation level (< 0.5% Rmax) does not exceed values for simple burial maturation based on the estimated burial history. Oil inclusions within fracture-filled calcite and dolomite cement indicate the key role of these fractures in oil migration.The fluid inclusion temperature profiles constructed from the available data revealed the occurrence of petroleum in dolomite, calcite, and anhydrite and characterize the distinct variations in the homogenization temperatures (T_h). Fluid inclusions in syntectonic calcite veins homogenize between 22 °C and 90 °C, showing a salinity decrease from 22 to 18 eq. wt.% NaCl. Fluid inclusions in anhydrite homogenize at < 50 °C, showing that the pore fluids became warmer and more saline during burial. The T_h range in the calcite-dolomite cement depicts a change in water composition; therefore, we infer these cements precipitated from petroleum-derived fluids. The microthermometry data on the petroleum fluid inclusions suggest that the reservoir was filled with heavy black oils and high-salinity waters and indicate that undersaturated oil was present in a hydrostatically pressured reservoir.The T_h data do not support vertical migration of hot fluids througout the section, but extensive lateral fluid migration, most likely, drove tectonically dewatering in the south or west of the pool.     

Density Calculation for NaCl-H2O Solutions in the Liquid-Solid Two-Phase Field in NaCl-H2O Three-Phase Inclusions

Three-phase NaCl-H₂O fluid inclusions featuring halite dissolution temperature（Tm）higher than vapor bubble disappearance temperature（T_h） are commonly observed in porphyry copper/molybdenum deposits,skarn-type deposits and other magmatic- hydrothermal ore deposits.Based on |ΔV₁|（the absolute value of volume variation of NaCl-H₂O solution in a heating or cooling process of inclusions）= |ΔV_s|（the absolute value of volume variation of the halite crystal in a heating or cooling process of inclusions） and on the principle of conservation of the mass of NaCl and H₂O,we systematically calculated the densities of NaCl-H₂O solutions in the solid-liquid two-phase field for temperatures（T_h） from 0.1℃ to 800℃ and salinities from 26.3 wt%to 99.2wt%.Consequently for the first time we obtained the upper limit of the density of NaCI-H₂O solutions in the solid-liquid twophase field for T_bm inclusions with variant salinities.The results indicate that for inclusions of the T_hm type with the same T_h,the higher the T_m or salinity is,the higher the density of the NaClsaturated solution will be.If a group of fluid inclusions were homogeneously trapped,they must have the same T_h value and the same T_m or salinity value.This may be used to distinguish homogeneous,inhomogeneous,and multiple entrapments of fluid inclusions.     

Sulfur isotope and fluid inclusion geochemistry of metamorphic Cu–Au vein deposits,central Cobar area,NSW, Australia

Vein-type, structurally controlled Cu–Au mineralisation hosted by turbidites of late Silurian to earliest Devonian age, forms an important resource close to the eastern margin of the Cobar Basin. Here we report 103 new sulfur isotope analyses, together with homogenisation temperatures and salinity data for 545 primary two-phase fluid inclusions for the mineralised zones from the central area of the Cobar mining district. A range in δ³⁴S values from 3.8 to 11.2‰ (average 7.9‰) is present. Sulfur is likely to have been derived from rock sulfur/sulfide in basin and basement rocks, but there may be an additional connate-derived component. Homogenisation temperatures (T_h) for inclusion fluids trapped in quartz and minor calcite veins range from near 150°C to 397°C. Fluid inclusions are characterised by a low CO₂ content and low, but variable salinities (2.1–9.1 wt% NaCl equivalent). Generations of inclusion fluids correspond to six paragenetic stages of vein quartz deposition and recrystallisation at the Chesney mine. Primary fluid inclusions in the first two stages were subjected to re-equilibration resulting from increased confining pressure. Their T_h range (151–317°C) is considered a minimum for the temperature of these fluids. Sulfide and gold deposition at Chesney appears to be related to fluids of moderately high T_h (range 270–397°C) associated with the final paragenetic stage. T_h for the ore-related fluids may be close to the solvus of the H₂O–NaCl–CO₂ system and hence near trapping temperatures. Late-stage entry of a hot, moderately saline ore-forming fluid is implicated as the origin of the Cu–Au mineralisation. However, comparison with geochemical data for the vein-style Zn–Pb–Ag deposits at Cobar demonstrates that differences in metal content for individual zones cannot be attributed to major differences in fluid temperature or salinity. Rather, these differences are probably due to variations in source-rock reservoirs and structural pathways along which the ore-forming fluids moved.     

The application of fluid inclusions to migration of oil and diagenesis in petroleum reservoirs

Fluid inclusions can be used to interpret thermal history and petroleum maturation and migration relative to burial history. Temperature, pressure and composition data collected from fluid inclusions are used to determine the environment of diagenesis and the timing of cementation and migration. Cements in petroleum reservoirs contain both oil and aqueous fluid inclusions. Fluorescence spectroscopy is used to identify oil inclusions and to determine the maturity of entrapped oil. The lifetime of fluorescence induced by a pulsed laser is related to the API gravity of entrapped oil. Interpretation of fluid inclusion data depends on knowing the origin of fluid inclusions and the probability that they survive in the burial environment. Those aspects of fluid inclusion study are investigated by synthesizing oil and aqueous inclusions in calcite crystals in laboratory experiments. Examples of how fluid inclusions are used to determine the physico-chemical environments of diagenesis in petroleum reservoirs and the timing of cementation and migration are given for the Wealden Basin, England, the Mishrif Formation, Dubai, the Smackover Formation, Gulf Coast, U.S.A. and Jurassic sandstones, offshore Norway. In the Wealden Basin, temperature data from fluid inclusions are used to determine that oil migration occurred in the Cretaceous and that the reservoir rocks have been uplifted to varying degrees at a time after migration. Distribution of oil inclusions indicates that generation and migration of oil was principally in the western part of the basin. The geochemistry of oil inclusions in calcite cements from the Mishrif Formation, Dubai, are used to determine the type and maturity of entrapped oil. Temperature data from oil and water inclusions are used to relate reservoir diagenesis to burial history and the migration of oil. In deep Smackover reservoirs oil contains H₂S. The origin of the H₂S is examined by study of fluid inclusions containing H₂S. In Jurassic sandstones, offshore Norway, fluid inclusion studies show that silica cementation is related to burial depth whereas a later calcite cementation originated from invasion of a hot fluid.     

牛庄洼陷沙河街组超压系统发育特征及其演化

东营凹陷牛庄洼陷沙河街组发育有超压系统,这对油气运移和聚集过程有着重要的影响。在对超压系统现今发育特征研究的基础上,本文运用约束下数值模拟方法对牛庄洼陷超压系统的演化规律进行研究,并探讨了超压系统的主要形成机制。牛庄洼陷在沙河街组四段、沙河街组三段的下亚段和中亚段存在着超压系统,最大压力系数可以达到1.8,最大剩余压力超过了20MPa。自沙三段上亚段沉积期开始,超压系统开始发育。到东营组沉积期末,超压系统经历了大约10Ma的泄压过程。自新近系馆陶组沉积期,超压系统再次迅速增压,逐渐接近现今发育状况。上覆地层沙三段上亚段高沉积速率导致了超压系统的形成和早期剩余压力的增加,而水热增压和烃类物质大量生成联合造成超压系统晚期迅速增压。超压系统演化规律揭示出在油气主要运移期研究区古异常流体压力的分布状况,这为进一步开展牛庄洼陷油气运移和聚集过程的动力学研究提供了理论依据。     

渤海始新统沙四段层序地层特征及与周边油区的对比

渤海湾盆地始新统沙四段(沙河街组四段)形成时的构造背景特点决定了它的复杂性、多变性和多样性。沙四段在其建组剖面分为沙四上、中和下三个亚段。随着新钻井的增多和研究的不断深入,渤海沙四段层序地层的认识也在不断加深。渤海以前的沙四段基本没有分出亚段,只是分出了南北两种类型。现在认为渤海发育完整的沙四段,分为上下两个亚段,下部为蒸发盐湖相沉积,上部为正常的砂泥岩沉积。南部发育完整的沙四段,北部只钻遇了沙四上亚段,可能缺失沙四下亚段;上下亚段以假整合接触,南北地层是统一的,而不是两种类型。沙四下亚段相当于济阳坳陷典型沙四段中、下两个亚段。沙四段分为继承和残留两种类型,二者有很大的差别。沙四段下亚段不具备生油能力,上亚段发育完整的生储盖组合,可以形成自生自储的油气田,是深层勘探的重要方向之一。     

Use of comprehensive two-dimensional gas chromatography for the characterization of ultra-deep condensate from the Bohai Bay Basin,China

A gas condensate from well ND1 in the Jizhong Depression of the Bohai Bay Basin, China is characterized by two-dimensional gas chromatography with flame ionization detector (GC × GC–FID) and time-of-flight mass spectrometry (GC × GC–TOFMS). This condensate is sourced from the fourth member of the Shahejie Formation (Es4) but reservoired in the Mesoproterozoic Wumishan Formation carbonate at a depth of 5641–6027 m and the reservoir temperature is 190–201 °C. It is the deepest and the highest temperature discovery in the basin to date. The API gravity of the condensate is 51° and the sulfur content is < 0.04%. A total of 4955 compounds were detected and quantified. Saturated hydrocarbons, aromatic hydrocarbons and non-hydrocarbon account for 94.8%, 5.1% and 0.02% of the condensate mass, respectively. Some long chain alkylated cyclic alkanes, decahydronaphthalenes and diamondoids are tentatively identified in this condensate. The C₆–C₉ light hydrocarbon parameters show that the gas condensate was generated at relatively high maturity but its generation temperature derived from the dimethylpentane isomer ratio seems far lower than the current reservoir temperature. Some light hydrocarbon parameters indicate evaporative fractionation may also be involved due to multiple-charging and mixing. The diamondoid concentrations and gas oil ratio (GOR) suggest that the ND1 condensate results from 53.3–55% cracking. Since significant liquids remain, the exploration potential of ultra-deep buried hill fields in the Bohai Bay Basin remains high.     

渤中坳陷超压-构造活动联控型流体流动与油气快速成藏

渤中坳陷是东营组沉积期及其之后渤海湾盆地沉降-沉积速率最高的地区, 亦是晚期断裂活动最强烈的地区.较高的沉降-沉积速率产生了重要的成藏物质效应: (1) 持续的较快速沉降-沉积使东营组发育较深湖-深湖相泥岩并成熟, 从而使渤中坳陷发育沙河街组和东营组2套有效源岩; (2) 较高的沉降-沉积速率引起的压实不均衡及伴生的源岩快速生烃引起较强的超压, 超压对有机质热演化的抑制作用使沙河街组源岩生、排烃滞后, 从而使沙河街组和东营组在晚期同时保持在较有利的生、排油阶段, 这是渤中坳陷油气资源丰富和油气晚期快速成藏的物质基础.较强的超压和强烈的断裂活动决定了超压-构造活动联控型流体流动, 进而决定了油气幕式快速成藏过程和油气分布: 油气主要富集于新近系, 新构造运动控制油气分布      

Origin and Source of Deep Natural Gas in Nanpu sag,Bohai Bay Basin,China

Natural gas exploration in Nanpu sag, Bohai Bay Basin, has achieved breakthroughs in recent years, and a number of natural gas and condensate wells with high yield have been found in several structures in the beach area. Daily gas production of single wells is up to 170,000 m3, and high-yield wells are mainly distributed in?the Nanpu No. 1 structural belt.?Studies have shown that these natural gases are mainly hydrocarbon gases, with methane content about 80% to 90% and ethane 6%-9%, so they are mainly wet gas; and non-hydrocarbons are at a low level.?Carbon isotopes of methane range from -42‰ to -36‰, and ethane from -28‰ to -26‰. Calculated maturity based on the relationship between δ13C and Ro of natural gas, the gases are equivalent to those generated from organic matter when Ro is 1.0%-1.7% (mainly 1.25%-1.32%). The natural gas is oil-type gas generated from the source rocks at mature to high mature stage, associated with condensate, so carbon isotopes of the gases are heavier. Natural gas in the Nanpu No.1 structural belt is mainly associated gas with condensate. The analysis of the origin and source of natural gas and condensate, combined with the monomer hydrocarbon carbon isotopes and biomarker, indicated that the main source rocks in the Nanpu No.1 structural belt were Es3 (the lower member of the Shahejie Formation), followed by Es1 (the upper member of the Shahejie Formation).?The high-mature hydrocarbons from source rocks in the deep sag mainly migrated through deep inherited faults into shallow traps and accumulated to form oil and gas pools. Therefore, there is a great potential for exploring gas in deep layers.     

渤海湾盆地束鹿凹陷沙一段石盐岩中流体包裹体特征及其地质意义

束鹿凹陷内古新统沙河街组一段石盐岩中发育了大量原生的人字形单一液相水溶液包裹体和次生油包裹体,这为深刻揭示凹陷内蒸发岩成因及油气运移、保存提供了有利条件.在流体包裹体岩相学研究的基础上,开展了流体包裹体均一温度测试、并恢复了钻井的埋藏史和包裹体捕获时间及古压力.研究表明石盐岩中与次生油包裹体同期的水溶液包裹体均一温度分为66.5~91.5 ℃和103.7~108.9 ℃两期,其对应的捕获时间分别为10.56~10.11 Ma和1.10 Ma,表明油气流体进入盐岩层的时间分别为馆陶组沉积的中晚期和更新统沉积期,与生烃史的研究结果基本吻合.石盐岩层中部利用包裹体模拟的古压力系数高达1.64,底部石盐岩中存在大量超压条件下形成的单一液相油包裹体,证明盐下存在超压系统,而超压系统的存在为油气的运移和保存提供了动力条件.      

冀东油田南堡凹陷南堡2号构造带烃源岩地球化学特征与油源对比

南堡凹陷南堡2号构造带主要含油层段为古近系东营组东一段砂岩及奥陶系灰岩。对典型井老堡南1井原油与烃源岩的多项有机化学指标分析表明:南堡2号构造带烃源岩形成的沉积环境为陆相浅湖弱还原环境;东一段与东二段烃源岩表现出未成熟的特征;东三段与沙河街组烃源岩表现出成熟的特征,其生烃深度门限在3100m左右,主力生烃门限为3700m以下的沙河街组。通过油、岩饱和烃色谱-质谱参数综合对比,东营组一段的原油主要来自沙河街组一段的烃源岩,为"下生上储"油气藏;而奥陶系原油主要来自沙三段的烃源岩,为"新生古储"油气藏。      

Analysis of wax hydrocarbons in petroleum source rocks from the Damintun depression, eastern China, using high temperature gas chromatography

A detailed organic geochemical study; utilising petrography, biomarker hydrocarbon analysis and high temperature GC analysis of extractable wax hydrocarbon constituents was performed on four marginally oil window-mature source rocks from the Shahejie Formation (Eocene), Damintun depression in eastern China. The main maceral components in the source rocks were vitrinite, liptinite and exinite, with vitrinite being more abundant (>50 vol.%) in organic-lean samples whose TOC contents were between 1 and 2 wt.%. Large differences in pristane/phytane ratios suggested that the organic-rich samples were deposited in a less oxic depositional environment than that for the organic-lean rocks. The distribution of extractable wax hydrocarbons, determined by high temperature GC, showed a marked difference between these two sample types. The organic-rich samples contained high molecular weight hydrocarbons (HMWHCs) dominated by macrocrystalline n-alkanes (n-C₂₃–n-C₃₇, typically maximising at n-C₂₉), while the organic-lean samples contained lower amounts of extractable wax hydrocarbons but were relatively rich in microcrystalline components (> n-C₃₅). In all source rocks (Es3 and Es4), a noticeable odd-over-even predominance (OEP) of n-alkane chain lengths (up to n-C₆₅) was evident, consistent with a direct biological origin for the long n-alkyl chains. They were most probably formed during diagenesis from decarboxylation of predominantly even-carbon-numbered aliphatic acids originating from higher plant or lacustrine algal sources and/or were directly biosynthesised in hydrocarbon form. At least two other homologous series of branched/cyclic HMWHCs were observed, one of which was confirmed as a series of branched alkanes (probably methyl-branched). The carbon number distribution patterns of HMWHCs may be primarily controlled by thermal maturity and biogenic source input as well as being influenced by diagenetic reactions governed by depositional environmental conditions, as shown previously [Carlson, R.M.K., Teerman, S.C., Moldowan, J.M., Jacobson, S.R., Chan, E.I., Dorrough, K.S., Seetoo, W.C., Mertani, B., 1993. High temperature gas chromatography of high wax oils. In: Indonesian Petroleum Association, 22nd Annual Convention Proceedings. Jakarta, Indonesian, pp. 483–507. Carlson, R.M.K., Jacobsen, S.R., Moldowan, J.M., Chan E.I., 1994. Potential application of high temperature gas chromatography to Middle Eastern petroleum exploration and production. In: Al-Husseini, M.I. (Ed.), Geo'94, Vol 1., Selected Middle East Papers from The Middle East Petroleum Geoscience Conference, 1994; Gulf PetroLink. Manama, Bahrain, pp. 258–267]. Our study indicates for the first time that Es3 source rocks as well as Es4 facies contain HMWHCs. The distributions of extractable wax hydrocarbons suggest that both Es4 and Es3 members may potentially serve as important parent source rocks for generating waxy petroleum in this region.     

Three Episodes of Hydrocarbon Generation and Accumulation of Marine Carbonate Strata in Eastern Sichuan Basin, China

It is concluded that there are three hydrocarbon generation and accumulation processes in northeastern Sichuan on the basis of the characteristics of solid bitumen, gas-light oils-heavy oils, homogenization temperature of fluid inclusions and diagenesis for beach- and reef-facies dolomite gas- bearing reservoirs in the Puguang Gas Field, northeastern Sichuan Basin, southern China. The first hydrocarbon generation and accumulation episode occurred in the Indosinian movement （late Middle Triassic）. The sapropelic source rocks of the O3w （Upper Ordovician Wufeng Formation）-S1l （Lower Silurian Longmaxi Formation） were buried at depths of 2500 m to 3000 m with the paleogeothermal temperature ranging from 70℃ to 95℃, which yielded heavy oil with lower maturity. At the same time, intercrystalline pores, framework pores and corrosion caused by organic acid were formed within the organic reef facies of P2ch （Upper Permian Changxing Formation）. And the first stage of hydrocarbon reservoir occurred, the level of surface porosity of residual solid bitumen {solid bitumen/ （solid bitumen ＋ residual porosity）} was higher than 60%. The second episode occurred during the Middle Yanshanian movement （late Middle Jurassic）. During that period, the mixed organic source rocks were deposited in an intra-platform sag during the Permian and sapropelic source rocks of O3w-S1l experienced a peak stage of crude oil or light oil and gas generation because they were buried at depths of 3500 m to 6800 m with paleogeothermal temperatures of 96-168℃. At that time, the level of surface porosity of residual solid bitumen of the T1f shoal facies reservoirs was between 25% and 35%, and the homogenization temperatures of the first and second stages of fluid inclusions varied from 100℃ to 150℃. The third episode occurred during the Late Yanshanian （Late Cretaceous） to the Himalayan movement. The hydrocarbon reservoirs formed during the T1f and P2ch had the deepest burial of 7700 m to 8700 m and paleogeotemperatu     

渤海湾盆地辽河坳陷锦310预探井钻前储集层质量预测

为了在渤海湾盆地辽河坳陷锦310预探井钻探前预测锦1井区古近系沙二段储集层的质量,文中应用成岩作用数值模拟技术预测了该地区沙二段的成岩阶段,综合考虑成岩作用和沉积微相对储集层孔隙度的影响,建立了孔隙度预测模型,在钻前预测了沙二段的孔隙度。结果表明,锦1井区沙二段储集层在大部分地区处于中成岩阶段A期,次生孔隙发育;在填隙物含量高达16.13％的条件下,锦310井钻前预测孔隙度和钻后实测孔隙度的绝对误差只有1.3％。由此可见,综合考虑成岩作用和沉积相的钻前储集层质量预测方法,可应用于预探井的勘探部署。     

Enhanced late gas generation potential of petroleum source rocks via recombination reactions: Evidence from the Norwegian North Sea

Gas generation in the deep reaches of sedimentary basins is usually considered to take place via the primary cracking of short alkyl groups from overmature kerogen or the secondary cracking of petroleum. Here, we show that recombination reactions ultimately play the dominant role in controlling the timing of late gas generation in source rocks which contain mixtures of terrigeneous and marine organic matter. These reactions, taking place at low levels of maturation, result in the formation of a thermally stable bitumen, which is the major source of methane at very high maturities. The inferences come from pyrolysis experiments performed on samples of the Draupne Formation (liptinitic Type II kerogen) and Heather Formation (mixed marine-terrigeneous Type III kerogen), both Upper Jurassic source rocks stemming from the Norwegian northern North Sea Viking Graben system. Non-isothermal closed system micro scale sealed vessel (MSSV) pyrolysis, non-isothermal open system pyrolysis and Rock Eval type pyrolysis were performed on the solvent extracted, concentrated kerogens of the two immature samples. The decrease of C₆₊ products in the closed system MSSV pyrolysis provided the basis for the calculation of secondary gas (C_1-5) formation. Subtraction of the calculated secondary gas from the total observed gas yields a “remaining” gas. In the case of the Draupne Formation this is equivalent to primary gas cracked directly from the kerogen, as detected by a comparison with multistep open pyrolysis data. For the Heather Formation the calculated remaining gas formation profile is initially attributable to primary gas but there is a second major gas pulse at very high temperature (>550 °C at 5.0 K min⁻¹) that is not primary. This has been explained by a recondensation process where first formed high molecular weight compounds in the closed system yield a macromolecular material that undergoes secondary cracking at elevated temperatures. The experiments provided the input for determination of kinetic parameters of the different gas generation types, which were used for extrapolations to a linear geological heating rate of 10⁻¹¹ K min⁻¹. Peak generation temperatures for the primary gas generation were found to be higher for Heather Formation (T_max = 190 °C, equivalent to R_o appr. 1.7%) compared to Draupne Formation (T_max = 175 °C, equivalent to appr. R_o 1.3%). Secondary gas peak generation temperatures were calculated to be 220 °C for the Heather Formation and 205 to 215 °C for the Draupne Formation, respectively, with equivalent vitrinite reflectance values (R_o) between 2.4% and 2.0%. The high temperature secondary gas formation from cracking of the recombination residue as detected for the Heather Formation is quantitatively important and is suggested to occur at very high temperatures (T_max approx. 250 °C) for geological heating rates. The prediction of a significant charge of dry gas from the Heather Formation at very high maturity levels has important implications for petroleum exploration in the region, especially to the north of the Viking Graben where Upper Jurassic sediments are sufficiently deep buried to have experienced such a process.     

渤海湾盆地南堡凹陷滩海地区奥陶系原油油源分析

近年来渤海湾盆地南堡凹陷的油气勘探取得了重大突破。在滩海区奥陶系古潜山钻遇工业性高产油气流,使奥陶系古潜山成为南堡油田重要勘探目的层之一,但目前对奥陶系主要产油层中油气的来源问题仍存在着不同的认识。通过对奥陶系原油与古近系沙三段、沙一段和东三段3套烃源岩的地球化学特征进行对比研究,并结合奥陶系油气成藏特征,探讨了奥陶系原油的油源。结果表明：南堡油田奥陶系原油生物标志化合物特征和稳定碳同位素组成与沙三段烃源岩的相似,二者具有较好的亲缘关系;同时,区域性的不整合面、油源断层可以成为沟通奥陶系古潜山储层与沙三段油源的运移通道;奥陶系原油主要来源于沙三段烃源岩。