Formation of a cohesive floodplain in a dynamic experimental meandering river

Field studies suggest that a cohesive floodplain is a necessary condition for meandering in contrast to braided rivers. However, it is only partly understood how the balance between floodplain construction by overbank deposition and removal by bank erosion and chutes leads to meandering. This is needed because only then does a dynamic equilibrium exist and channels maintain meandering with low width–depth ratios. Our objective is to understand how different styles of floodplain formation such as overbank deposition and lateral accretion cause narrower channels and prevent chute cutoffs that lead to meandering. In this study we present two experiments with a self‐forming channel in identical conditions, but to one we added cohesive silt at the upstream boundary. The effect of cohesive silt on bank stability was tested in auxiliary bank erosion experiments and showed that an increase in silt reduced erosion rates by a factor of 2. The experiment without silt developed to a braided river by continuous and extensive shifting of multiple channels. In contrast, in the meandering river silt deposits increased bank stability of the cohesive floodplain and resulted in a reduction of chute cutoffs and increased sinuosity by continuous lateral migration of a single channel. Overbank flow led to deposition of the silt and two styles of cohesive floodplain were observed: first, overbank vertical‐accretion of silt, e.g. levee, overbank sedimentation or splays; and second, lateral point bar accretion with silt on the scrolls and in the swales. The first style led to a reduction in bank erosion, while the second style reduced excavation of chutes. We conclude that sedimentation of fine cohesive material on the floodplain by discharge exceeding bankfull is a necessary condition for meandering. Copyright © 2013 John Wiley & Sons, Ltd.     

Hydraulic and geomorphic processes in an overbank flood along a meandering,gravel‐bed river: implications for chute formation

Hydraulic interactions between rivers and floodplains produce off‐channel chutes, the presence of which influences the routing of water and sediment and thus the planform evolution of meandering rivers. Detailed studies of the hydrologic exchanges between channels and floodplains are usually conducted in laboratory facilities, and studies documenting chute development are generally limited to qualitative observations. In this study, we use a reconstructed, gravel‐bedded, meandering river as a field laboratory for studying these mechanisms at a realistic scale. Using an integrated field and modeling approach, we quantified the flow exchanges between the river channel and its floodplain during an overbank flood, and identified locations where flow had the capacity to erode floodplain chutes. Hydraulic measurements and modeling indicated high rates of flow exchange between the channel and floodplain, with flow rapidly decelerating as water was decanted from the channel onto the floodplain due to the frictional drag provided by substrate and vegetation. Peak shear stresses were greatest downstream of the maxima in bend curvature, along the concave bank, where terrestrial LiDAR scans indicate initial floodplain chute formation. A second chute has developed across the convex bank of a meander bend, in a location where sediment accretion, point bar development and plant colonization have created divergent flow paths between the main channel and floodplain. In both cases, the off‐channel chutes are evolving slowly during infrequent floods due to the coarse nature of the floodplain, though rapid chute formation would be more likely in finer‐grained floodplains. The controls on chute formation at these locations include the flood magnitude, river curvature, floodplain gradient, erodibility of the floodplain sediment, and the flow resistance provided by riparian vegetation. Copyright © 2015 John Wiley & Sons, Ltd.     

Bench development along the regulated,lower River Dee,UK

Channel change to regulated flows along large lowland rivers with cohesive bank materials has been investigated on the lower Welsh Dee, including the tidally influenced reach. Reduction of channel width has involved the formation of a 5–40m wide discontinuous bench, often linking ‘point’ and ‘concave’ locations. Map evidence shows that wide benches occur where historically the channel had migrated laterally; narrow benches were found at stable channel locations. Auger cores of the bench deposits clearly differentiated the two contrasting depositional environments within meandering rivers: ‘point bench’ and ‘concave bench’. Around an individual bend a morphologically continuous bench showed a gradient in sediment characteristics from coarser sediments (point locations) to finer organic deposits (concave locations); it also showed a topographic gradient, gaining 0.5m in elevation around the bend suggesting that bench accretion at concave locations is faster than at point locations in fluvially dominated reaches. Such patterns are suggested to have important implications for riparian ecosystems. Copyright © 1999 John Wiley & Sons, Ltd.     

Intra‐event scale bar–bank interactions and their role in channel widening

Channel bars and banks strongly affect the morphology of both braided and meandering rivers. Accordingly, bar formation and bank erosion processes have been greatly explored. There is, however, a lack of investigations addressing the interactions between bed and bank morphodynamics, especially over short timescales. One major implication of this gap is that the processes leading to the repeated accretion of mid‐channel bars and associated widenings remain unsolved. In a restored section of the Drau River, a gravel‐bed river in Austria, mid‐channel bars have developed in a widening channel. During mean flow conditions, the bars divert the flow towards the banks. One channel section exhibited both an actively retreating bank and an expanding mid‐channel bar, and was selected to investigate the morphodynamic processes involved in bar accretion and channel widening at the intra‐event timescale. We repeatedly surveyed riverbed and riverbank topography, monitored riverbank hydrology and mounted a time‐lapse camera for continuous observation of riverbank erosion processes during four flow events. The mid‐channel bar was shown to accrete when it was submerged during flood events, which at the subsequent flow diversion during lower discharges narrowed the branch along the bank and increased the water surface elevation upstream from the riffle, which constituted the inlet into the branch. These changes of bed topography accelerated the flow along the bank and triggered bank failures up to 20 days after the flood events. Four analysed flow events exhibited a total bar expansion from initially 126 m² to 295 m², while bank retreat was 6 m at the apex of the branch. The results revealed the forcing role of bar accretion in channel widening and highlighted the importance of intra‐event scale bed morphodynamics for bank erosion, which were summarized in a conceptual model of the observed bar–bank interactions. Copyright © 2015 John Wiley & Sons, Ltd.     

A two‐dimensional morphodynamic model of gravel‐bed river with floodplain vegetation

Artificially straight river channels tend to be unstable, and ultimately develop into river meanders through bank erosion and point‐bar deposition. In this paper account is taken of the effects of riparian and floodplain vegetation on bank strength, floodplain flow resistance, shear stress partitioning, and bedload transport. This is incorporated into an existing 2D hydrodynamic‐morphological model. By applying the new model to an initially straight and single‐threaded channel, the way that its planform and cross‐sectional geometry evolve for different hydraulic and floodplain vegetation conditions is demonstrated. The results show the formation and upstream migration of gravel bars, confluence scouring and the development of meandering and braiding channel patterns. In cases where the channel becomes unstable, the instability grows out of bar formation. The resulting braiding patterns are similar to analytical results. The formation of a transition configuration requires a strong influence from vegetation. Copyright © 2010 John Wiley & Sons, Ltd.     

Morphodynamic effects of vegetation life stage on experimental meandering channels

Previous studies have demonstrated that riparian vegetation leads to channel transformation from a multi-bar to a single-thread channel planform. However, it still remains unclear how the presence of pioneer and mature vegetation affects the morphodynamics of single-thread meandering rivers. In this study, we therefore investigated the effects of vegetation strength on the morphodynamic evolution of an experimental meandering channel. Three physical laboratory experiments were conducted using alfalfa sprouts in different life stages – no vegetation, immature vegetation, and mature vegetation – to simulate different floodplain vegetation strengths. Our results demonstrate that vegetation plays a key role in mediating bank erosion and point-bar accretion, and that this is reflected in both the evolution of the channel bed as well as the sediment flux. The presence of mature vegetation maintained a deep, single-thread channel by reducing bank erosion, thereby limiting both channel widening and sediment storage capacity. Conversely, an unvegetated floodplain led to channel widening and high sediment storage capacity. Channel evolution in the unvegetated scenario showed that the active sediment supply from outer bank erosion led to slightly delayed point-bar accretion on the inner banks due to helical flow, deflecting the surface flow toward the outer banks and causing further erosion. In contrast, in the immature vegetation scenario, the outer banks were also initially eroded, but point-bar accretion did not clearly progress. This led to a greater width-to-depth ratio, resulting in a transition from a single- to a multi-thread channel with minor flow paths on the floodplain. The experimental results suggest that the eco-morphodynamic effects of young (low-strength) and mature (high-strength) vegetation are different. Notably, low-strength, early-stage vegetation increases channel complexity by accelerating both channel widening and branching, and therefore might promote the coexistence of multi-bars and pioneer vegetation.     

Contribution to understanding the historical evolution of meandering rivers using dendrochronological methods: example of the Mała Panew River in southern Poland

The Ma?a Panew is a meandering river that flows 20 km through a closed forest. During times of high discharge the riverbed and floodplain are transformed under the influence of riparian trees. The changes provide the opportunity to measure the intensity of erosion and sediment accumulation based on tree ages, the dating of coarse woody debris (CWD) in the riverbed, and the dating of eccentric growth of tilting trees and exposed roots. The bed and floodplain in reaches of the Ma?a Panew River with low banks were greatly altered as a result of long periods of flooding between 1960 and 1975. Banks were undercut during these floods and black alders tilted. Those parts of alder crowns or stems which tilt and sink generate small sand shadows. When erosion is intensive alder clumps are undercut from concave banks and become mid‐channel islands, while on the other side of the channel meandering bar levels are created. The reaches with higher banks were altered by large floods, especially in 1985 and 1997. The concave banks are undercut and sediment with CWD is deposited within the riverbed, forming sand shadows behind the CWD. Copyright © 2006 John Wiley & Sons, Ltd.     

Character of channel planform change and meander development: Luangwa River,Zambia

Air photo interpretation and field survey were used to examine rates and patterns of planform change over the last 40 years on an 80 km reach of the Luangwa River, Zambia. The river, a tributary of the Zambezi, is a 100–200 m wide, medium sinuosity sand‐bed river (sinuosity index 1·84). High rates of channel migration (<33 m a⁻¹) and cutoffs on meandering sections are frequent. Some meandering reaches, however, have remained relatively stable. A form of anastomosing with anabranches up to 14 km in length is also a characteristic. Patterns of meander development vary between bends but all can be described in relation to traditional geomorphic models; change occurs by translation, rotation, double‐heading, concave bank bench formation and cutoff causing river realignment. At the local scale spatial variability in bank resistance, induced by floodplain sedimentology, controls rate of bank erosion, and valley‐side channel ‘deflection’ is also apparent. Copyright © 2000 John Wiley & Sons, Ltd.     

Modelling of meander migration in an incised channel

An updated linear computer model for meandering rivers with incision has been developed. The model simulates the bed topography, flow field, and bank erosion rate in an incised meandering channel. In a scenario where the upstream sediment load decreases （e.g., after dam closure or soil conservation）, alluvial river experiences cross section deepening and slope flattening. The channel migration rate might be affected in two ways： decreased channel slope and steeped bank height. The proposed numerical model combines the traditional one-dimensional （1D） sediment transport model in simulating the channel erosion and the linear model for channel meandering. A non-equilibrium sediment transport model is used to update the channel bed elevation and gradations. A linear meandering model was used to calculate the channel alignment and bank erosion/accretion, which in turn was used by the 1D sediment transport model. In the 1D sediment transport model, the channel bed elevation and gradations are represented in each channel cross section. In the meandering model, the bed elevation and gradations are stored in two dimensional （2D） cells to represent the channel and terrain properties （elevation and gradation）. A new method is proposed to exchange information regarding bed elevations and bed material fractions between 1D river geometry and 2D channel and terrain. The ability of the model is demonstrated using the simulation of the laboratory channel migration of Friedkin in which channel incision occurs at the upstream end.     

Reconstruction of eroded and deposited sediment volumes of the embanked River Waal,the Netherlands,for the period ad 1631–present

In the last few centuries humans have modified rivers, and rivers have responded with noticeable changes in sedimentary dynamics. The objective of this study is to assess these responses of the sedimentary dynamics. Therefore, we calculated a sediment budget for eroded and deposited sediment volumes in a ~12‐km long floodplain section of the largest semi‐natural embanked but still dynamic lower Rhine distributary, for ~50‐years time slices between ad 1631 and present. This is the period during which embanked floodplains were formed by downstream migration of meander bends between confining dykes. Our sediment budget involves a detailed reconstruction of vertical and lateral accretion rates and erosion rates of floodplain sediment. To do so, we developed a series of historical geomorphological maps, and lithogenetic cross‐sections. Based on the maps and cross‐sections, we divided the floodplain into building blocks representing channel bed and overbank sediment bodies. Chronostratigraphy within the blocks was estimated by interpretation of heavy metal profiles and from optically stimulated luminescence (OSL) dating results. Sediment budgets were hence calculated as a change of volume of each building block between time steps. The amount of lateral accretion initially increased, as a result of island and sand bar formation following embankment. From the eighteenth century onwards, there was a decrease of lateral processes in time, which is a result of straightening of the river by human activities, and a reduction of water and sediment supply due to the construction of a new upstream bifurcation. With straightening of the river, the floodplain area grew. Artificial fixation of the channel banks after ad 1872 prevented lateral activity. From then on, overbank deposition became the main process, leading to a continuous increase of floodplain elevation, and inherent decrease of flooding frequency and sediment accumulation rate. Copyright © 2014 John Wiley & Sons, Ltd.     

The formation of an anabranching planform in a sandy floodplain by increased flows and sediment load

Anabranching rivers evolve in various geomorphic settings and various river planforms are present within these multi‐channel systems. In some cases, anabranches develop meandering patterns. Such river courses existed in Europe prior to intensive hydro‐technical works carried out during the last 250 years. Proglacial stream valleys, inherited from the last glaciation, provided a suitable environment for the development of anabranching rivers (wide valleys floors with abundant sand deposits). The main objective of the present study is to reconstruct the formation of an anabranching river planform characterized by meandering anabranches. Based on geophysical and geological data obtained from field research and a reconstruction of palaeodischarges, a model of the evolution of an anabranching river formed in a sandy floodplain is proposed. It is demonstrated that such a river system evolves from a meandering to an anabranching planform in periods of high flows that contribute to the formation of crevasse splays. The splay channels evolve then into new meandering flow paths that form ‘second‐order’ crevasses, avulsions and cutoffs. The efficiency of the flow is maintained by the formation of cutoffs and avulsions preventing the development of high sinuosity channels, and redirecting the flow to newly formed channels during maximum flow events. A comparison with other anabranching systems revealed that increased discharges and sediment loads are capable of forming anabranching planforms both in dryland and temperate climate zones. The sediment type available for transport, often inherited from older sedimentary environments, is an important variable determining whether the channel planform is anabranching, with actively migrating channels, or anastomosing, with stable, straight or sinuous branches. Copyright © 2017 John Wiley & Sons, Ltd.     

Modelling mid‐channel bars in meandering channels

An analytical modelling framework is proposed to reproduce the frequently observed but poorly studied occurrence of mid‐channel bars in meandering channels. Mid‐channel bars occur in meanders and may characterize transitional morphologies between pure meandering and braided rivers. Based on existing field and experimental observations, we propose that two different mechanisms can generate central topographical patterns in meanders. A former mechanism (‘width‐forced’) is related to spatial width oscillations which determine a laterally symmetrical bed shear stress pattern that promotes mid‐channel bars. A second mechanism (‘curvature‐forced’) can take place also in curvilinear equiwidth streams since also longitudinal variations of channel curvature can produce laterally symmetrical alterations of the sediment transport capacity. A perturbation approach is employed to model both mechanisms within a common framework, allowing reproduction, at least qualitatively, of several observed features. While width‐forced mid‐channel bars are a symmetric linear altimetric response, to reproduce curvature‐forced mid‐channel bars requires modelling nonlinear flow‐bed topography interactions at the second order of the perturbation expansion. Hypotheses on how these mechanisms operate are further discussed through an application to field cases. The amplitude of the nonlinear response can be relevant compared to that of the point bar in equiwidth meanders and the location of mid‐channel bars seldom coincides with bend apexes, mainly depending upon the intrinsic meander wavelength. Central bars tend to symmetrically divert the flow against the two banks, a process which is proposed as a possible cause of cross‐sectional overwidening, along with the asymmetry between the rates of bank erosion and of the opposite bank accretion. The outcomes of this first modelling step on the subject allow discussion of the mutual feedback processes that characterize interactions between mid‐channel bars and width variations in river meanders. Copyright © 2010 John Wiley & Sons, Ltd.     

Gravel transport and morphological change in braided sunwapta river,Alberta, Canada

The relation between morphological change and patterns of variation in bedload transport rate in braided streams was observed by repeated, daily topographic surveys over a 25 day study period in a 60 m reach of the proglacial Sunwapta River, Alberta, Canada. There are two major periods of morphological change, each lasting several days and each involving the complete destruction and reconstruction of bar complexes. Bar complex destruction was caused by redirection of the flow and by downstream extension of the confluence scour zone upstream. Reconstruction involved accretion of unit bars on bar head, flank and tail and in one case was initiated by disection of a large, lobate unit bar. High rates of sediment movement, measured from net scour and fill of the cross-sections, coincided with these morphological changes. Sediment was supplied from both bed and bank erosion, and patterns and distances of transfer were highly variable. Rates of transport estimated by matching upstream erosional volumes with downstream deposition were much greater than those estimated from either a step-length approach or a sediment budget. Measurements of scour and fill and observations of morphological change indicate that step lengths (virtual transport distances) were typically 40–100m during a diurnal discharge cycle. Shorter step lengths occurred when transfer was confined to a single anabranch and longer steps involved channel changes at the scale of the entire reach. Sediment budgeting was used to describe the spatial patterns of sediment transport associated with the morphological changes and to estimate minimum daily reach-averaged transport rates. Mean bedload transport rates correlate with discharge, but with considerable scatter. The largest deviations from the mean relation can be tied to phases of channel incision, bank erosion, scour hole migration, bar deposition and channel filling apparently controlled by changes and fluctuations in sediment supply from upstream, independent of discharge. These are interpreted as field evidence of ‘autopulses’ or ‘macropulses’ in bedload transport, previously observed only in laboratory models of braided streams.     

Anastomosis and the continuum of channel pattern

Anastomosing rivers are characterized by multiple channels separated by islands excised from the floodplain. Their status relative to the continuum concept of channel pattern is assessed with channel pattern defined in terms of three variables—flow strength, bank erodibility and relative sediment supply. Using an ordinal scaling (L(ow)–M(oderate)–H(igh)), the traditional forms of straight, meandering and braided have respective representations of (L,L,L), (M,L/M,L/M) and (H,H,M/H) in terms of those variables. The anastomosing pattern is on average represented by (L,L,M/H) but not so definitively as other forms. Specification of the third element (sediment supply) is particularly hampered by the paucity of data but aggradation, a characteristic of many anastomosing rivers, can be thought of as symptomatic of a moderately high rate of supply relative to the ability for onward transport. A sufficiently high rate of supply to a channel with low flow strength and resistant banks would induce shoaling and/or lateral constriction that locally forces flow out of the main channel and ultimately leads to the cutting of anabranches. A flow regime characterized by concentrated floods of relatively large magnitude is also regarded as highly conducive to the formation of new channels where low bank erodibility constrains channel capacity. Anastomosis may in certain cases represent a transitional form of channel pattern but there is no denying the longevity of some anastomosing systems.     

Hierarchy modeling of subsurface palaeochannel reservoir architecture

The studies on fluvial reservoir architecture are mainly aimed at outcrop and modern deposition,but rarely at the subsurface reservoir,so there are few effective methods to predict the distribution of subsurface reservoir architectures. In this paper,taking the meandering river reservoir of Guantao formation Gudao Oilfield,Jiyang depression,Baohai Gulf Basin,East China as an example,the archi-tectural modeling method of complex meandering belt reservoir is proposed,that is hierarchy con-straint,pattern fitting and multi-dimensional interaction. Architectures of meandering river reservoir can be divided into three hierarchies: meandering channel sandbody,point bar and lateral accretion body. Different hierarchies of the quantitative architecture pattern are fitted to subsurface well data (including dynamic monitoring data) in different hierarchies through one-dimensional hole,2D profiles and plane and 3D space,which are verified by each other. And then 3D model in different hierarchies is established. At the same time,the quantificational relationship between width of active river and the scale of point bar is set up,and the scale of lateral accretion sand body and shale beddings is con-firmed with horizontal well data. The study not only has significant meaning on the development of geology,but also can improve the oilfield exploitation greatly.     

ANABRANCHING RIVERS: THEIR CAUSE,CHARACTER AND CLASSIFICATION

Anabranching rivers consist of multiple channels separated by vegetated semi-permanent alluvial islands excised from existing floodplain or formed by within-channel or deltaic accretion. These rivers occupy a wide range of environments from low to high energy, however, their existence has never been adequately explained. They occur concurrently with other types of channel pattern, although specific requirements include a flood-dominated flow regime and banks that are resistant to erosion, with some systems characterized by mechanisms to block or constrict channels, thereby triggering avulsion. The fundamental advantage of an anabranching river is that, by constructing a semi-permanent system of multiple channels, it can concentrate stream flow and maximize bed-sediment transport (work per unit area of the bed) under conditions where there is little or no opportunity to increase gradient. On the basis of stream energy, sediment size and morphological characteristics, six types of anabranching river are recognized; types 1–3 are lower energy and types 4–6 are higher energy systems. Type 1 are cohesive sediment rivers (commonly termed anastomosing) with low w/d ratio channels that exhibit little or no lateral migration. They are divisible into three subtypes based on vegetative and sedimentary environment. Type 2 are sand-dominated, island-forming rivers, and type 3 are mixed-load laterally active meandering rivers. Type 4 are sand-dominated, ridge-forming rivers characterized by long, parallel, channel-dividing ridges. Type 5 are gravel-dominated, laterally active systems that interface between meandering and braiding in mountainous regions. Type 6 are gravel-dominated, stable systems that occur as non-migrating channels in small, relatively steep basins. Anabranching rivers represent a relatively uncommon but widespread and distinctive group that, because of particular sedimentary, energy-gradient and other hydraulic conditions, operate most effectively as a system of multiple channels separated by vegetated floodplain islands or alluvial ridges.     

The anastomosing pattern and the extensively distributed scroll bars in the middle Amazon River

The middle Amazon River, between the confluences of the Negro and Madeira Rivers in Brazil, shows an anastomosing morphology with relatively stable, multiple interconnected channels that locally enclose floodbasins. Additionally, this system is characterized by sinuous secondary channels with meander development, discontinuous natural levees concentrated on the concave banks and extensively distributed scroll bars mainly in the islands, related to subrecent and present‐day migration of mainly secondary channels. This distinguishes the Amazon from many other anastomosing rivers that have laterally stable, non‐meandering channels. We analyzed sedimentary processes using field data, morphology and channel changes trough a temporal analysis using remote sensing data and obtained optically stimulated luminescence (OSL) dating to understand the genesis of this large anastomosing river and the development of its meandering secondary channels. Scroll bars have developed in a multichannel river system at least since 7.5 ± 0.85 ka. Avulsion is inferred to have played a minor role in the formation of this anastomosing system, with only one documented case while mid‐channel bar formation and chute cut‐offs of the main and secondary channels are the main formative mechanisms of anastomosis in this system. Differences in resistance to erosion control the relatively straight main channel and allow secondary channels to develop a meandering platform. Vegetation contributes to the relative stability of islands and the floodplain. Low gradient and high average aggradation rate (1.1 mm yr^?1) are conditions which favor the development of anastomosis. Additionally, stable external conditions, low abandonment rate of older channels and independence from high avulsion frequency suggest a long‐lived, semi‐static type of anastomosing river in this reach of the Amazon. Copyright © 2012 John Wiley & Sons, Ltd.     

Decadal changes in distribution and frequency of wood in a free meandering river,the Ain River,France

This study examined the temporal dynamics and longitudinal distribution of wood over a multi‐decadal timescale at the river reach scale (36 km) and a meander bend scale (300–600 m) in the Ain River, a large gravel‐bed river flowing through a forested corridor, and adjusting to regulation and floodplain land‐use change. At the 36 km scale, more wood was recruited by bank erosion in 1991–2000 than since the 1950s. The longitudinal distribution of accumulations was similar between 1989 and 1999, but in both years individual pieces occurred homogeneously throughout the reach, while jam distribution was localized, associated with large concave banks. A relationship between the mean number of pieces and the volume recruited by bank erosion (r² = 0·97) indicated a spatial relationship between areas of wood production and storage. Wood mass stored and produced and channel sinuosity increased from 1993 to 2004 at three meander bends. Sinuosity was related to wood mass recruited by bank erosion during the previous decade (r² = 0·73) and both of these parameters were correlated to the mean mass of wood/plot (r² = 0·98 and 0·69 respectively), appearing to control wood storage and delivery at the bend scale. This suggests a local origin of wood stored in channel, not input from upstream trapped by preferential sites. The increase in wood since 1950 is a response to floodplain afforestation, to a change from braided to meandering channel pattern in response to regulation, and to recent large floods. We observed temporal stability of supply and depositional sectors over a decade (on a reach scale). Meander bends were major storage sites, trapping wood with concave banks, also delivering wood. These results, and the link between sinuosity and wood frequency, establish geomorphology as a dominant wood storage and recruitment control in large gravel‐bed rivers. Copyright © 2007 John Wiley & Sons, Ltd.     

Morphodynamics of a bedrock‐alluvial meander bend that incises as it migrates outward: approximate solution of permanent form

In meandering rivers cut into bedrock, erosion across a channel cross‐section can be strongly asymmetric. At a meander apex, deep undercutting of the outer bank can result in the formation of a hanging cliff (which may drive hillslope failure), whereas the inner bank adjoins a slip‐off slope that connects to the hillslope itself. Here we propose a physically‐based model for predicting channel planform migration and incision, point bar and slip‐off slope formation, bedrock abrasion, the spatial distribution of alluvial cover, and adaptation of channel width in a mixed bedrock‐alluvial channel. We simplify the analysis by considering a numerical model of steady, uniform bend flow satisfying cyclic boundary conditions. Thus in our analysis, ‘sediment supply’, i.e. the total volume of alluvium in the system, is conserved. In our numerical simulations, the migration rate of the outer bank is a specified parameter. Our simulations demonstrate the existence of an approximate state of dynamic equilibrium corresponding to a near‐solution of permanent form in which a bend of constant curvature, width, cross‐sectional shape and alluvial cover distribution migrates diagonally downward at constant speed, leaving a bedrock equivalent of a point bar on the inside of the bend. Channel width is set internally by the processes of migration and incision. We find that equilibrium width increases with increasing sediment supply, but is insensitive to outer bank migration rate. The slope of the bedrock point bar varies inversely with both outer bank migration rate and sediment supply. Although the migration rate of the outer bank is externally imposed here, we discuss a model modification that would allow lateral side‐wall abrasion to be treated in a manner similar to the process of bedrock incision. Copyright © 2016 John Wiley & Sons, Ltd.     

Stability,morphology and surface grain size patterns of channel bifurcation in gravel–cobble bedded anabranching rivers

This study presents the first detailed field‐based analysis of the morphology of bifurcations within anabranching cobble–gravel rivers. Bifurcations divide the flow of water and sediment into downstream anabranches, thereby influencing the characteristics of the anabranches and the longevity of river islands. The history, morphology, bed grain size, and flow vectors at five bifurcations on the Renous River, New Brunswick, Canada, were studied in detail. The angles of bifurcations within five anabranching rivers in the Miramichi basin were investigated. The average bifurcation angle was 47°, within the range of values cited for braided river bifurcations. Bifurcation angle decreased when anabranches were of similar length. Shields stresses in channels upstream of bifurcations were lower than reported values for braided rivers. Stable bifurcations displayed lower Shields stresses than unstable bifurcations, contrary to experimental results from braided river bifurcations. Bifurcations in anabranching rivers are stabilized by vegetation that slows channel migration and helps to maintain a uniform upstream flow field. The morphology of stable bifurcations enhances their stability. A large bar, shaped like a shallow ramp that increases in elevation to floodplain level, forms at stable bifurcations. Floodplains at stable bifurcations accrete upstream at rates between 0·9 and 2·5 m a^?1. Bars may also form within the entrance of an anabranch downstream of the bifurcation node. These bars are associated with bifurcation instability, forming after a period of stability or an avulsion. Channel abandonment occurs when a bar completely blocks the entrance to one anabranch. The stability of channels upstream of bifurcations and the location of bars at bifurcations influence bifurcation stability and the maintenance of river anabranching in the long term. Copyright © 2006 John Wiley & Sons, Ltd.