Sediment and nutrient storage in a beaver engineered wetland

Beavers, primarily through the building of dams, can deliver significant geomorphic modifications and result in changes to nutrient and sediment fluxes. Research is required to understand the implications and possible benefits of widespread beaver reintroduction across Europe. This study surveyed sediment depth, extent and carbon/nitrogen content in a sequence of beaver pond and dam structures in South West England, where a pair of Eurasian beavers (Castor fiber) were introduced to a controlled 1.8 ha site in 2011. Results showed that the 13 beaver ponds subsequently created hold a total of 101.53 ± 16.24 t of sediment, equating to a normalised average of 71.40 ± 39.65 kg m². The ponds also hold 15.90 ± 2.50 t of carbon and 0.91 ± 0.15 t of nitrogen within the accumulated pond sediment. The size of beaver pond appeared to be the main control over sediment storage, with larger ponds holding a greater mass of sediment per unit area. Furthermore, position within the site appeared to play a role with the upper‐middle ponds, nearest to the intensively‐farmed headwaters of the catchment, holding a greater amount of sediment. Carbon and nitrogen concentrations in ponds showed no clear trends, but were significantly higher than in stream bed sediment upstream of the site. We estimate that >70% of sediment in the ponds is sourced from the intensively managed grassland catchment upstream, with the remainder from in situ redistribution by beaver activity. While further research is required into the long‐term storage and nutrient cycling within beaver ponds, results indicate that beaver ponds may help to mitigate the negative off‐site impacts of accelerated soil erosion and diffuse pollution from agriculturally dominated landscapes such as the intensively managed grassland in this study. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Variability of dry sediment bulk density between and within retention ponds and its impact on the calculation of sediment yields

Monitoring sediment yields from catchments is important for assessing overall denudation rates and the impact of environmental change. One of the methods used to assess sediment yield is by quantifying sedimentation rates in reservoirs, lakes or small ponds. Before reliable sediment yield values (t ha^?1 a^?1) can be computed from such sedimentation records, the measured sediment volumes need to be converted to sediment masses using representative values of the dry sediment bulk density. In textbooks, simple relations predicting dry sediment bulk density from sediment texture, time since deposition and hydrologic condition are presented. In this study, 13 small flood retention ponds in central Belgium were sampled to reveal the variability in dry sediment bulk density and to test the commonly used relations to predict dry sediment bulk density. Dry sediment bulk density varies not only between the selected ponds (0·78–1·35 t m^?3) but also within individual ponds (coefficient of variation at 95 per cent ranges from 7 to 80 per cent). The observed variability can be attributed primarily to the hydrologic condition of the retention pond and, also, to sediment texture. The existing relations are not a reliable predictor for the observed dry bulk densities, because they are primarily based on sediment texture. Thus, when using volumetric sedimentation data from small ponds with varying hydrologic condition to predict sediment yield, existing relations predicting dry sediment bulk density cannot be applied. Instead, frequent and dense sampling of sediments is necessary to calculate a representative value of the dry sediment bulk density. Copyright © 2001 John Wiley & Sons, Ltd.     

Long‐term carbon storage and hydrological control of CO2 exchange in tundra ponds in the Hudson Bay Lowland

Carbon dioxide fluxes and water balance were examined in 43 tundra ponds in the northern portion of the Hudson Bay Lowland near Churchill, Manitoba. Most of the ponds were hydrologically disconnected from their catchments during dry periods throughout the post‐melt season. However, episodic reconnection occurred following large precipitation events where depression storage was exceeded. Significant shifts in pond chemistry were observed following precipitation events, with the degree of CO₂ saturation increasing during these periods. Pond CO₂ concentrations rapidly fell to pre‐event levels following events, suggesting that hydrological connectivity can affect the magnitude and direction of CO₂ gas fluxes in tundra ponds. Atmospheric CO₂ invaded ponds with highly organic sediments for most of the summer, suggesting that terrestrially derived inorganic carbon was insufficient to meet the demands of algal net production. In contrast, ponds with highly mineral sediments continued to evade CO₂ during the summer. In a subset of 11 ponds, long‐term rates of carbon accumulation in sediment ranged from 0·6 to 2·2 mol C m^?2 year^?1. Very strong correlations existed between average sediment accumulation rates and pond perimeters and basin areas suggesting that peat may be a major source of sediment carbon. Aeolian transport is also a potentially large source of sediment carbon. Copyright © 2004 John Wiley & Sons, Ltd.     

Validation of a vegetated filter strip model (VFSMOD)

Vegetated filter strips (VFS) are designed to reduce sediment load and other pollutants into water bodies. However, adaptation of VFS in the field has been limited owing to lack of data about their efficiency and performance under natural field conditions. A number of models are available that simulate sediment transport and trapping in VFS, but there is a general lack of confidence in VFS models owing to limited validation studies and model limitations that prevent correct application of these models under field conditions. The objective of this study is to test and validate a process‐based model (VFSMOD) that simulates sediment trapping in VFS. This model links three submodels: modified Green–Ampt's infiltration, Quadratic overland flow submodel based on kinematic wave approximation and University of Kentucky sediment filtration model. A total of 20 VFS, 2, 5, 10 and 15 m long and with various vegetation covers, were tested under simulated sediment and runoff conditions. The results of these field experiments were used to validate the VFS model. The model requires 25 input parameters distributed over five input files. All input parameters were either measured or calculated using experimental data. The observed sediment trapping efficiencies varied from 65% in the 2‐m long VFS to 92% in the 10‐m long filters. No increase in sediment removal efficiency was observed at higher VFS length. Application of the VFS model to experimental data was satisfactory under the condition that actual flow widths are used in the model instead of the total filter width. Predicted and observed sediment trapping efficiencies and infiltration volume fitted very well, with a coefficient of determination (R²) of 0·9 and 0·95, respectively. Regression analyses revealed that the slope and intercept of the regression lines between predicted versus observed infiltration volume and trapping efficiency were not significantly different than the line of perfect agreement with a slope of 1·0 and intercept of 0·0. Copyright © 2001 John Wiley & Sons, Ltd.     

Simulation and optimization model for irrigation planning and management

A simulation and optimization model was developed and applied to an irrigated area in Delta, Utah to optimize the economic benefit, simulate the water demand, and search the related crop area percentages with specified water supply and planted area constraints. The user interface model begins with the weather generation submodel, which produces daily weather data, which is based on long‐term monthly average and standard deviation data from Delta, Utah. To simulate the daily crop water demand and relative crop yield for seven crops in two command areas, the information provided by this submodel was applied to the on‐farm irrigation scheduling submodel. Furthermore, to optimize the project benefit by searching for the best allocation of planted crop areas given the constraints of projected water supply, the results were employed in the genetic algorithm submodel. Optimal planning for the 394·6‐ha area of the Delta irrigation project is projected to produce the maximum economic benefit. That is, projected profit equals US$113 826 and projected water demand equals 3·03 × 10⁶ m³. Also, area percentages of crops within UCA#2 command area are 70·1%, 19% and 10·9% for alfalfa, barley and corn, respectively, and within UCA#4 command area are 41·5%, 38·9%, 14·4% and 5·2% for alfalfa, barley, corn and wheat, respectively. As this model can plan irrigation application depths and allocate crop areas for optimal economic benefit, it can thus be applied to many irrigation projects. Copyright © 2003 John Wiley & Sons, Ltd.     

Runoff and sediment generation on bench‐terraced hillsides: measurements and up‐scaling of a field‐based model

Despite widespread bench‐terracing, stream sediment yields from agricultural hillsides in upland West Java remain high. We studied the causes of this lack of effect by combining measurements at different spatial scales using an erosion process model. Event runoff and sediment yield from two 4‐ha terraced hillside subcatchments were measured and field surveys of land use, bench‐terrace geometry and storage of sediment in the drainage network were conducted for two consecutive years. Runoff was 3·0–3·9% of rainfall and sediment yield was 11–30 t ha⁻¹ yr⁻¹ for different years, subcatchments and calculation techniques. Sediment storage changes in the subcatchment drainage network were less than 2 t ha⁻¹, whereas an additional 0·3–1·5 t ha⁻¹ was stored in the gully between the subcatchment flumes and the main stream. This suggests mean annual sediment delivery ratios of 86–125%, or 80–104% if this additional storage is included. The Terrace Erosion and Sediment Transport (TEST) model developed and validated for the studied environment was parameterized using erosion plot studies, land use surveys and digital terrain analysis to simulate runoff and sediment generation on the terraced hillsides. This resulted in over‐estimates of runoff and under‐estimates of runoff sediment concentration. Relatively poor model performance was attributed to sample bias in the six erosion plots used for model calibration and unaccounted covariance between important terrain attributes such as slope, infiltration capacity, soil conservation works and vegetation cover. Copyright © 2005 John Wiley & Sons, Ltd.     

Spatio‐temporal sedimentation patterns in beaver ponds along the Chevral river,Ardennes, Belgium

With the recovery of the European beaver (Castor fiber) and their capacity to engineer fluvial landscapes, questions arise as to how they influence sediment transport, including the spatio‐temporal trends and patterns of sedimentation in beaver ponds. The Chevral river (Ardennes, Belgium) contains two beaver dam sequences, which appeared in 2004. Volumes of sediment deposited behind the dams were measured, and grain‐size distribution patterns were determined. Flow discharges and sediment fluxes were measured at the inflow and outflow of each dam sequence. Between 2004 and 2011, 1710.1 m³ of sediment was deposited behind the beaver dams, with an average sediment thickness of 25.1 cm. The thickness of the sediment layer was significantly (p < 0.001) related to the area of the beaver ponds. Along the stream, beaver pond sediment thickness displayed a sinusoidal deposition pattern, in which ponds with thick sediment layers were preceded by a series of ponds with thinner sediment layers. A downstream textural coarsening in the dam sequences was also observed, probably because of dam failures subsequent to surges. Differences in sediment flux between the inflow and outflow at the beaver pond sequence were related to the river hydrograph, with deposition taking place during the rising limbs and slight erosion during the falling limbs. The 7‐year‐old sequences have filtered 190.19 ton of sediment out of the Chevral river, which is of the same order of magnitude as the 374.4 ton measured in pond deposits, with the difference between the values corresponding to beaver excavations (60.24 ton), inflow from small tributaries, and runoff from the valley flanks. Hydrogeomorphic effects of C. fiber and Castor canadensis activity are similar in magnitude. The detailed analysis of sedimentation in beaver pond sequences confirms the potential of beavers to contribute to river and wetland restoration, and catchment management. Copyright © 2013 John Wiley & Sons, Ltd.     

Aeolian fetch distance and secondary airflow effects: the influence of micro‐scale variables on meso‐scale foredune development

Unsuccessful attempts to use process‐scale models to predict long‐term aeolian sediment transport patterns have long been a feature of aeolian research. It has been proposed that one approach to overcome these problems is to identify micro‐scale variables that are important at longer timescales. This paper assesses the contribution of two system variables (secondary airflow patterns and fetch distance) to medium‐term (months to years) dune development. The micro‐scale importance of these variables had been established during previous work at the site (Magilligan Strand, Northern Ireland). Three methods were employed. First, sand drift potentials were calculated using 2 years of regional wind data and a sediment transport model. Second, wind data and large trench traps (2 m length × 1 m width × 1·5 m depth) were used to assess the actual sediment transport patterns over a 2‐month period. Third, a remote‐sensing technique for the identification of fetch distance, a saltation impact sensor (Safire) and wind data were utilized to gauge, qualitatively, sediment transport patterns over a 1‐month period. Secondary airflow effects were found to play a major role in the sediment flux patterns at these timescales, with measured and predicted rates matching closely during the trench trap study. The results suggest that fetch distance is an unimportant variable at this site. Copyright © 2007 John Wiley & Sons, Ltd.     

Assessment of runoff and sediment yield in the Miyun Reservoir catchment by using SWAT model

The Soil and Water Assessment Tool (SWAT) was used to simulate the transport of runoff and sediment into the Miyun Reservoir, Beijing in this study. The main objective was to validate the performance of SWAT and the feasibility of using this model as a simulator of runoff and sediment transport processes at a catchment scale in arid and semi‐arid area in North China, and related processes affecting water quantity and soil erosion in the catchment were simulated. The investigation was conducted using a 6‐year historical streamflow and sediment record from 1986 to 1991; the data from 1986 to 1988 was used for calibration and that from 1989 to 1991 for validation. The SWAT generally performs well and could accurately simulate both daily and monthly runoff and sediment yield. The simulated daily and monthly runoff matched the observed values satisfactorily, with a Nash‐Sutcliffe coefficient of greater than 0·6, 0·9 and a coefficient of determination 0·75, 0·9 at two outlet stations (Xiahui and Zhangjiafen stations) during calibration. These values were 0·6, 0·85 and 0·6, 0·9 during validation. For sediment simulation, the efficiency is lower than that for runoff. Even so, the Nash‐Sutcliffe coefficient and coefficient of determination were greater than 0·48 and 0·6 for monthly sediment yield during calibration, and these values were greater than 0·84 and 0·95 during validation. Sensitivity analysis shows that sensitive parameters for the simulation of discharge and sediment yield include curve number, base flow alpha factor, soil evaporation compensation factor, soil available water capacity, soil profile depth, surface flow lag time and channel re‐entrained linear parameter, etc. Copyright © 2009 John Wiley & Sons, Ltd.     

Evaluation of a dynamic multi‐class sediment transport model in a catchment under soil‐conservation agriculture

Soil erosion models are essential tools for the successful implementation of effective and adapted soil conservation measures on agricultural land. Therefore, models are needed that predict sediment delivery and quality, give a good spatial representation of erosion and deposition and allow us to account for various soil conservation measures. Here, we evaluate how well a modified version of the spatially distributed multi‐class sediment transport model (MCST) simulates the effectiveness of control measures for different event sizes. We use 8 year runoff and sediment delivery data from two small agricultural watersheds (0·7 and 3·7 ha) under optimized soil conservation. The modified MCST model successfully simulates surface runoff and sediment delivery from both watersheds; one of which was dominated by sheet and the other was partly affected by rill erosion. Moreover, first results of modelling enrichment of clay in sediment delivery are promising, showing the potential of MCST to model sediment enrichment and nutrient transport. In general, our results and those of an earlier modelling exercise in the Belgian Loess Belt indicate the potential of the MCST model to evaluate soil erosion and deposition under different agricultural land uses. As the model explicitly takes into account the dominant effects of soil‐conservation agriculture, it should be successfully applicable for soil‐conservation planning/evaluation in other environments. Copyright © 2008 John Wiley & Sons, Ltd.     

Effectiveness of grass strips in trapping suspended sediments from runoff

Little information is available concerning the performance of grass strips for erosion control from steep cropland. An experiment was conducted on 5‐m‐long grass strips with slopes of 3°～15° that were subjected to silt laden runoff and simulated rainfall, to investigate the sediment trapping processes. The grass strips had three treatments including intact grass control (C), no litter (dead grass material covering the soil surface was removed) (NL), and no litter or leaves (only 2～3 cm grass stems and roots were reserved) (NLL). Generally the grass strips had a high effectiveness in trapping sediment from steep cropland runoff. Sediment trapping efficiency (STE) decreased with increasing slope gradient, and even for a 15° slope, STE was still more than 40%. Most sediment deposited in the backwater region before each grass strips. The removal of grass litter or/and leaves had no significant influence on STE. The sediment median size (D₅₀) in inflow was greater than that in outflow, and the difference (ΔD₅₀) decreased with increasing slope. A positive power relationship between STE and ΔD₅₀ can be obtained. Grass strips were more effective in trapping sediments coarser than 10 or 25 µm, but sediments finer than 1 µm were more readily removed from runoff than particles in the range of 2 to approximately 10 µm. Grass litter had less influence on flow velocity than leaves because the deposited sediment partially covered the litter layer. Mean flow velocity and its standard deviation were negatively correlated with STE, and they can help make good estimation of STE. Results from this study should be useful in planting and managing forage grass to effectively conserve soil loss by runoff from steep slopes on the Loess Plateau of China. Copyright © 2010 John Wiley & Sons, Ltd.     

The use of riparian vegetated filter strips to reduce river sediment loads: an overestimated control measure?

The spatially distributed soil erosion and sediment delivery model WATEM/SEDEM was used to simulate the impact of riparian vegetated filter strips (RVFSs) on river sediment delivery at different spatial scales. For a field plot with a straight slope, sediment reduction by the RVFSs is comparable to results obtained through experimental set‐ups elsewhere (i.e. >70%). However, at the scale of an entire catchment, sediment reduction is much less (i.e. ±20%) due to (1) overland flow convergence, which reduces the sediment trapping efficiency of an RVFS, and (2) because part of the sediment bypasses the RVFSs through ditches, sewers and road surfaces. These results suggest that, at the catchment scale, RVFSs should be accompanied with other conservation techniques that are more appropriate for reducing river sediment loads, and that also reduce on‐site soil erosion. Copyright © 2006 John Wiley & Sons, Ltd.     

The impact of land use change and check‐dams on catchment sediment yield

Extensive land use changes have occurred in many areas of SE Spain as a result of reforestation and the abandonment of agricultural activities. Parallel to this the Spanish Administration spends large funds on hydrological control works to reduce erosion and sediment transport. However, it remains untested how these large land use changes affect the erosion processes at the catchment scale and if the hydrological control works efficiently reduce sediment export. A combination of field work, mapping and modelling was used to test the influence of land use scenarios with and without sediment control structures (check‐dams) on sediment yield at the catchment scale. The study catchment is located in SE Spain and suffered important land use changes, increasing the forest cover 3‐fold and decreasing the agricultural land 2·5‐fold from 1956 to 1997. In addition 58 check‐dams were constructed in the catchment in the 1970s accompanying reforestation works. The erosion model WATEM‐SEDEM was applied using six land use scenarios: land use in 1956, 1981 and 1997, each with and without check‐dams. Calibration of the model provided a model efficiency of 0·84 for absolute sediment yield. Model application showed that in a scenario without check dams, the land use changes between 1956 and 1997 caused a progressive decrease in sediment yield of 54%. In a scenario without land use changes but with check‐dams, about 77% of the sediment yield was retained behind the dams. Check‐dams can be efficient sediment control measures, but with a short‐lived effect. They have important side‐effects, such as inducing channel erosion downstream. While also having side‐effects, land use changes can have important long‐term effects on sediment yield. The application of either land use changes (i.e. reforestation) or check‐dams to control sediment yield depends on the objective of the management and the specific environmental conditions of each area. Copyright © 2008 John Wiley & Sons, Ltd.     

The impact of agriculture on solute and suspended sediment load on a Mediterranean watershed after intense rainstorms

The solute and suspended‐sediment load following five rainstorms (2005–2007) with varied intensities were studied at the Vernegà experimental watershed, north‐western Spain. Two land‐use areas are located within this watershed, the upstream one (forest) with 160 ha a 100% forested area, and the downstream one (agricultural) with 97 ha being 9 ha conventional agricultural field and 88 ha forest. This study investigates the capacity of each land‐use to yield water, suspended sediment concentration (SSC) and dissolved solid concentration (DSC). The hypothesis is that DSC and SSC from the agricultural area are greater than DSC and SSC of the forest area. Results showed that the agriculture area produced significantly greater mean DSC than in the forest area, the main contribution was the Ca²⁺ (24·68 ± 46·52 mg l^?1) ion at the agricultural area. A long‐term sediment production rate at the agricultural outlet was calculated (69·1 tonnes per 100 years) based on the total sediment discharge (TSD) and the recurrence interval of the largest event of the five rainstorms (October 2005). Geographic information system (GIS) spatial data layers of the watershed were produced to determine the relation of tracks, landforms, slopes and forest management to SSC yield in the forest outlet (133·89 ± 308·14 mg l^?1) during the five rainstorms. Agriculture practices are the main cause of soil erosion at the study area. Copyright © 2010 John Wiley & Sons, Ltd.     

Importance of soil surface characteristics on water erosion in a small grazed Sahelian catchment

This study concerns the problem of water erosion in the Sahel. Surface water and sediment yields (suspended matter and bedload) were monitored for 3 years (1998–2000) at the outlet of a small grazed catchment (1·4 ha) in the northern part of Burkina Faso. The catchment consists of about 64% sandy deposits (DRY soil surface type), which support most of the vegetation, and about 34% of crusted bare soils (ERO soil surface type). The annual solid‐matter export is more than 90% suspended sediment, varying between 4·0 and 8·4 t ha^?1. The bedload represents less than 10% of soil losses. In a single flood event (10 year return period), the sediment yield can reach 4·2 t ha^?1. During the period studied, a small proportion (20 to 32%) of the floods was thus responsible for a large proportion (80%) of the solid transport. Seasonal variation of the suspended‐matter content was also observed: high mean values (9 g l^?1) in June, decreasing in July and stabilizing in August (between 2 and 4 g l^?1). This behaviour may be a consequence of a reorganization of the soil surfaces that have been destroyed by trampling animals during the previous long dry season, vegetation growth (increase in the protecting effect of the herbaceous cover) and, to a lesser extent, particle‐supply limitation (exhaustion of dust deposits during July). The particle‐size distribution in the suspended matter collected at the catchment outlet is 60% made up of clay: fraction ≤2 µ m. The contribution of this clay is maximum when the water rises and its kaolinite/quartz ratio is then close to that of the ERO‐type surfaces. This indicates that these surfaces are the main source of clay within the catchment. Copyright © 2003 John Wiley & Sons, Ltd.     

Time‐integrated sampling of fluvial suspended sediment: a simple methodology for small catchments

Fine‐grained (<62·5 µm) suspended sediment transport is a key component of the geochemical flux in most fluvial systems. The highly episodic nature of suspended sediment transport imposes a significant constraint on the design of sampling strategies aimed at characterizing the biogeochemical properties of such sediment. A simple sediment sampler, utilizing ambient flow to induce sedimentation by settling, is described. The sampler can be deployed unattended in small streams to collect time‐integrated suspended sediment samples. In laboratory tests involving chemically dispersed sediment, the sampler collected a maximum of 71% of the input sample mass. However, under natural conditions, the existence of composite particles or flocs can be expected to increase significantly the trapping efficiency. Field trials confirmed that the particle size composition and total carbon content of the sediment collected by the sampler were representative statistically of the ambient suspended sediment. Copyright © 2000 John Wiley & Sons, Ltd.     

红壤小流域不同土地利用方式坡面下水塘底泥养分含量变化

以我国南方丘陵区红壤小流域为研究对象,对不同土地利用方式坡面下的4个水塘底泥中养分含量作了分层比较研究(0-5 cm,5-10 cm,10-15 cm,15-20 cm,20-25 cm,25-30 cm)．结果表明:4个水塘底泥养分含量差异明显,在0-15 cm泥层有机碳、全氮、速效氮和全磷含量以邻近村庄的水塘(简称C塘)底泥最高,其次为板栗园坡下的水塘(简称B塘),水稻田坡面下水塘(简称S塘)和花生地坡面下水塘(简称H塘)最低;在15-30 cm泥层,有机碳和速效氮含量以B塘最高,而全氮和全磷含量则以C塘最高;有效磷含量除C塘0-15 cm底泥外,其余均为痕量．表明土地利用方式对其坡面下水塘底泥养分含量影响明显．各水塘底泥养分随泥层加深均呈递减趋势,其中全氮和速效氮减幅以C塘最大,分别为36．0％和38．7％,有机碳和全磷减幅则以B塘最大,为29．4％和31．9％;各塘底泥养分含量的最大降幅主要在浅层底泥,水塘养分积累加速表明近年来农村面源污染加剧．传统农业耕作方式的改变是农村水体底泥养分含量增加的主要原因之一．     

Sediment‐water Fluxes of Nutrients and Dissolved Organic Carbon in Extensive Sea Cucumber Culture Ponds

Sediment samples were collected from three seawater aquaculture ponds, and soil characteristics, sediment oxygen consumption (SOC), dissolved organic carbon (DOC) and nutrient fluxes were measured using chamber incubations at laboratory. The three ponds were each representing a specific monoculture or polyculture model of sea cucumber. Total organic carbon (TOC) and total nitrogen (TN) contents in the dry sediment ranged from 0.14 to 0.26% and 0.022 to 0.037%, respectively. Total phosphorus (TP) contents in the sediment were more spatially and temporally variable. SOC ranged from 15.29 to 45.86 mmol m^–2 d^–1 and showed significant differences among the three ponds (p < 0.05). TOC, total carbon (TC) contents, and SOC of the sediment in the pond polycultured with jellyfish increased with culture time, indicating that jellyfish farming enhanced the accumulation of organic matter in the sediments to some extent. Sediment showed net nitrate and ammonium uptake in most ponds and months, and significant differences were found among months (p < 0.05). Dissolved inorganic phosphate (DIP) was released from the sediments in all ponds with low flux rates. DOC was released from the sediment in all ponds and ranged from 0.67 to 1.74 g DOC m^–2 d^–1. The results suggested that non‐artificial‐feeding sea cucumber culture ponds could not only yield valuable seafood products, but also effectively remove nutrients from the aquaculture systems and consequently alleviate nutrient loadings of the nearby coast.     

Estimating the sediment trap efficiency of intermittently dry reservoirs: lessons from the Kruger National Park,South Africa

The assessment of sediment yield from reservoir siltation requires knowledge of the reservoir's sediment trap efficiency (TE). Widely used approaches for the estimation of the long‐term mean TE rely on the ratio of the reservoir's storage capacity (C) to its catchment size (A) or mean annual inflow (I). These approaches have been developed from a limited number of reservoirs (N ≤ 40), most of them located in temperate climate regions. Their general applicability to reservoirs receiving highly variable runoff such as in semi‐arid areas has been questioned. Here, we examine the effect of ephemeral inflow on the TE of 10 small (≤ 280 × 10³ m³), intermittently dry reservoirs located in the Kruger National Park. Fieldwork was conducted to determine the storage capacity of the reservoir basins. The frequency and magnitude of spillage events was simulated with the daily time step Pitman rainfall–runoff model. Different runoff scenarios were established to cope with uncertainties arising from the lack of runoff records and imperfect input data. Scenarios for the relationship between water and sediment discharge were created based on sediment rating curves. Taking into account uncertainties in hydrological modelling, uncertainties of mean TE estimates, calculated from all scenarios (N = 9), are moderate, ranging from ±6 to ±11% at the 95% confidence level. By comparison, estimating TE from the storage capacity to catchment area (C/A) ratio induces high uncertainty (ranges of 35 to 65%), but this uncertainty can be confined (15 to 33%) when the latter approach is combined with hydrological modelling. Established methods relying on the storage capacity to mean annual inflow (C/I) ratio most probably lead to an overestimation of the TE for the investigated reservoirs. The approach presented here may be used instead to estimate the TE of small, intermittently dry reservoirs in semi‐arid climate regions. Copyright © 2017 John Wiley & Sons, Ltd.     

Dynamics of soil erosion rates and controlling factors in the Northern Ethiopian Highlands – towards a sediment budget

This paper analyses the factors that control rates and extent of soil erosion processes in the 199 ha May Zegzeg catchment near Hagere Selam in the Tigray Highlands (Northern Ethiopia). This catchment, characterized by high elevations (2100–2650 m a.s.l.) and a subhorizontal structural relief, is typical for the Northern Ethiopian Highlands. Soil loss rates due to various erosion processes, as well as sediment yield rates and rates of sediment deposition within the catchment (essentially induced by recent soil conservation activities), were measured using a range of geomorphological methods. The area‐weighted average rate of soil erosion by water in the catchment, measured over four years (1998–2001), is 14·8 t ha^?1 y^?1, which accounts for 98% of the change in potential energy of the landscape. Considering these soil loss rates by water, 28% is due to gully erosion. Other geomorphic processes, such as tillage erosion and rock fragment displacement by gravity and livestock trampling, are also important, either within certain land units, or for their impact on agricultural productivity. Estimated mean sediment deposition rate within the catchment equals 9·2 t ha^?1 y^?1. Calculated sediment yield (5·6 t ha^?1 y^?1) is similar to sediment yield measured in nearby catchments. Seventy‐four percent of total soil loss by sheet and rill erosion is trapped in exclosures and behind stone bunds. The anthropogenic factor is dominant in controlling present‐day erosion processes in the Northern Ethiopian Highlands. Human activities have led to an overall increase in erosion process intensities, but, through targeted interventions, rural society is now well on the way to control and reverse the degradation processes, as can be demonstrated through the sediment budget. Copyright © 2007 John Wiley & Sons, Ltd.