山东昌乐刚玉中锆石包裹体的地球化学特征

玄武岩中刚玉巨晶形成过程与壳幔相互作用有关,因此对其研究具有极高的科学价值。虽然多年来众多学者对新生代碱性玄武岩中刚玉在包裹体、地球化学等方面做了大量工作,但是到目前为止大家尚未就刚玉巨晶成因达成统一认识。本文通过扫描电镜对压碎后的刚玉进行观察,发现刚玉中含有锆石包裹体。为了进一步探究山东昌乐刚玉巨晶的成因,本文对包裹在刚玉巨晶中的锆石进行了氧同位素、微量元素、Lu-Hf同位素的分析。因为刚玉具有致密的晶格,锆石包裹体不会在碱性玄武岩浆的高温作用下Pb丢失,所以锆石包裹体的U-Pb年龄可以代表刚玉的结晶年龄。本次得到的年龄数据为(15.5±0.4)Ma,与宿主玄武岩的喷发年龄一致,并且与寄主玄武岩有一致Hf、O同位素,说明刚玉形成与岩浆作用有关。与此同时,锆石包裹体与同产区的锆石巨晶具有一致的Hf同位素和微量元素特征说明刚玉巨晶与锆石巨晶在形成上关系密切。虽然部分锆石微量元素具有壳源特征,综合本次试验所有结果(δ18OVSMOW=4.31‰~6.10‰,?Hf(t)=5.9~11.1,∑REE=53~1854μg/g)山东昌乐刚玉中锆石包裹体以地幔特征为主。     

河北阳原和山西大同新生代玄武岩的岩石地球化学特征:华北克拉通西部深部地质过程初探

报道了大兴安岭-太行山重力梯度带以西河北阳原和山西大同新生代玄武岩的元素和 Sr- Nd同位素地球化学数据.含幔源包体的阳原早第三纪碱性玄武岩具有均一的 Sr- Nd同位素组成(ε Nd≈ 5.7)和相似于 OIB的微量元素特征,玄武岩主要来自软流圈地幔,岩浆起源较深.大同地区第四纪时期同时产出碱性和拉斑玄武岩 , 碱性玄武岩也主要来自软流圈地幔,岩浆起源深度小于阳原样品 ; 拉斑玄武岩具有较低的ε Nd( 1～ 4),可能是软流圈和岩石圈地幔相互作用的产物,岩浆起源较浅.大同两类玄武岩在空间上分野明显,可能与桑干河断裂对软流圈地幔上涌的控制以及区域上岩石圈-软流圈作用程度的变化有关.     

山西繁峙新生代玄武岩地幔源区及成因探讨:元素及Sr-Nd-Pb-Hf同位素地球化学证据

山西省繁峙玄武岩位于华北克拉通重力梯度带附近,是华北克拉通中部新生代玄武岩重要组成部分。前人全岩K-Ar测年结果为26.3~24.3Ma。对繁峙地区苏孟庄和应县两地玄武岩的地球化学特征研究表明,其微量元素和同位素均具有类OIB特征,即富集不相容元素,轻、重稀土元素分馏明显((La/Yb)N=8.42~21.60),不存在Sr、Eu负异常,Sr同位素比值(87Sr/86Sr=0.703848~0.704870)较低,Nd(143Nd/144Nd=0.512617~0.513057)和Hf(176Hf/177Hf=0.282873~0.283001)同位素比值较高,Pb同位素比值分别为206Pb/204Pb=17.2~17.9,207Pb/204Pb=15.3~15.4和208Pb/204Pb=37.5~37.9。结合岩相学特征和主量元素特征,我们推断繁峙新生代玄武岩是软流圈低程度部分熔融结果,并存在岩石圈物质的加入,岩浆上升时在岩石圈地幔条件下的岩浆房内经历了以橄榄石、单斜辉石为主的分离结晶作用,岩浆因快速上升而地壳混染程度甚低。苏孟庄碱性玄武岩具有较深的熔融深度和较低的熔融程度,而应县亚碱性玄武岩熔融深度较浅,熔融程度较高。结合重力梯度带附近其他地区的新生代玄武岩的研究,我们推测重力梯度带附近新生代的火山活动可能起源于西部软流圈地幔向东流动越过重力梯度带时的减压部分熔融,该地区广泛分布的断裂带为岩浆上涌提供了通道。本文为中国东部新生代玄武质火山活动的岩石成因学研究提供了新的视角。     

中国东部部分地区新生代岩石圈地幔的成因:主量和微量元素制约

为厘定中国东部新生代岩石圈地幔的成因,进而探讨岩石圈减薄的方式,本文选择汉诺坝、女山、盘石山和方山尖晶石二辉橄榄岩作为研究对象,系统分析了其主、微量元素。结果表明,这些地区新生代岩石圈地幔具有"新生"的性质,为上涌的软流圈物质经过小于10%的部分熔融程度后的残留相形成,后又经历了类似新生代玄武岩性质的富硅熔体的交代,交代介质的物质贡献小于3%。新生代岩石圈地幔与古老克拉通岩石圈地幔在主、微量元素上的显著差异以及新生代岩石圈地幔微量元素特征的拟合,支持拆沉为华北克拉通东部减薄的主要方式。     

吉林省敦化东部地区新生代玄武岩地球化学特征及其地质意义

吉林省敦化东部地区新生代玄武岩大面积发育,为了解研究区深部地幔源区性质及本区玄武岩形成机制提供了良好的条件。研究区新生代玄武岩岩石学、地球化学特征研究结果表明,玄武岩为稀土元素富集型(LREE为59.56×10~(-6)~211.51×10~(-6)),具有富集大离子亲石元素Rb、Ba、K、P,亏损高场强元素Th、U、Hf的特征,并且Nb(9.49%~49.2%)、Ta(0.56%~3.33%)元素质量分数较高,说明其原始岩浆来源于岩石圈地幔及软流圈地幔的混合,且为在板内张性的构造环境下形成的大陆喷溢玄武岩。     

中国东部新生代玄武岩的地球化学──Ⅰ．主元素和微量元素组成：岩石成因及源区特征

所研究的玄武岩包括拉斑玄武岩、碱性玄武岩、苦橄粗玄岩和钾质玄武岩。主元素和微量元素的组成变化表明，中国东部玄武岩既是不同深度地幔部分熔融的产物，又经历了岩浆结晶分异作用。强不相容元素比值的变化特征显然与岩石圈地幔交代作用有关。软流圈地幔的上涌并导致上覆不均一的岩石圈地幔的部分熔融是形成中国东部新生代玄武岩的主要机制。     

中国东部新生代玄武岩的地球化学：Ⅰ.主元素和微量元素组成：岩石成因…

所研究的玄武岩包括拉斑玄武岩、碱性玄武岩、苦橄粗玄岩和钾质玄武岩。主元素和微量元素的组成变化表明，中国东部玄武岩既是不同深度地幔部分熔融的产物，又经历了岩浆结晶分层作用。强不相容元素比值的变化特征显然与岩石圈地幔交代作用有关。软流圈地幔的上涌并导致上覆不均一的岩石圈地幔的部分熔融是形成中国东部新生代玄武岩的主要机制。     

华北晚中生代和新生代玄武岩中单斜辉石巨晶来源及其对寄主岩岩浆过程的制约:以莒南和鹤壁为例

本文对华北克拉通晚中生代和新生代碱性玄武质岩石中的单斜辉石巨晶进行了主、微量元素和Sr-Nd同位素的综合研究,发现晚中生代和新生代单斜辉石巨晶存在明显的主、微量元素和同位素组成上的差异。新生代单斜辉石巨晶有Al-普通辉石和次透辉石两类;而中生代单斜辉石巨晶只有Al-普通辉石。新生代单斜辉石SiO_2含量高、REE配分型式为上凸型、LILE和放射性元素含量高,并具有比寄主碱性玄武岩更亏损的Sr和Nd同位素组成;而中生代单斜辉石SiO_2含量低、REE配分型式为LREE富集型、LILE和部分HFSE以及放射性元素含量低,并具有比寄主碱性玄武岩稍富集的Sr和Nd同位素组成;巨晶的结构、矿物成分和地球化学特征,以及Mg-Fe在熔体与单斜辉石间的分配状况皆说明,新生代碱性玄武岩中单斜辉石巨晶是碱性玄武岩浆在高压下结晶的,因此二者是同源的;而中生代单斜辉石巨晶是被寄主岩浆偶然捕获的捕虏晶,是不同源的。华北新生代单斜辉石巨晶存在于碱性玄武岩和拉斑玄武岩中,它们具有比寄主碱性玄武岩更亏损的Sr和Nd同位素组成,说明即使是碱性玄武岩也不能完全代表软流圈来源的原始岩浆,其在上升过程中或多或少存在同位素组成富集的物质的混入。同时,拉斑玄武岩不是碱性玄武质岩浆直接结晶分异的产物,亦不是完全由部分熔融程度的不同造成的。拉斑玄武岩中存在岩石圈地幔物质的贡献或是岩浆房内碱性玄武质岩浆受地壳混染作用的结果。     

福建省新生代玄武岩成因:Sr、Nd、Pb、Hf同位素地球化学约束

作为研究洋壳俯冲和壳幔相互作用理想对象的新生代玄武岩在福建省从沿海至内陆均有分布，根据地理位置这些新生代玄武岩可分成闽西、闽中与闽东沿海三个区域。本文对这些玄武岩进行了系统的全岩主、微量元素以及Sr、Nd、Pb、Hf同位素研究。结果表明，这些新生代玄武岩主要为碱性玄武岩、碧玄岩和粗面玄武岩，结合前人研究资料，可见这些玄武岩自闽东向闽西具有年龄逐渐变小、碱性逐渐增加的趋势。Sr、Nd、Pb、Hf同位素揭示这些玄武岩具有亏损地幔(DMM)与EMⅡ型富集地幔组分混合的特征。闽东沿海玄武岩相较于闽西、闽中玄武岩具有更高的Sr、Pb含量，更低的¹⁴³Nd/¹⁴⁴Nd值和¹⁷⁶Hf/¹⁷⁷Hf值，更趋近于EMⅡ特征。从西至东富集组分EMⅡ的逐渐增多暗示陆源沉积物与俯冲效应有关，这些陆源沉积物极可能是由俯冲洋壳带入软流圈地幔的。整个新生代玄武岩的Zr、Hf、Ti负异常与Pb同位素组成特征指示俯冲沉积物中可能含有碳酸盐组分。闽中柳城地区玄武岩的喷发年龄与闽东沿海地区玄武岩的喷发年龄较为接近；闽中柳城地区玄武岩Sr、...     

山东胶州大西庄辉石巨晶Sr-Nd同位素组成及其源区性质

胶州大西庄玄武岩（73 Ma）中的辉石巨晶与寄主玄武岩具有几乎完全相同的同位素组成,其⁸⁷Sr/⁸⁶Sr（t）和ε_Nd（t）分别为0.703 3～0.704 1、+4.5～+6.5和0.703 5～0.703 8、+7.1～+7.6,暗示辉石巨晶和寄主岩具有相同的地幔源区,即辉石巨晶是玄武岩浆在高压下结晶的产物.亏损的同位素特征表明：在白垩世末期（～73 Ma）,胶东地区的岩石圈地幔已经由富集转变为亏损,表现出类似于中国东部新生代地幔的同位素特征,即表明当时岩石圈减薄（或置换）已经完成.     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.