Petrographic and geochemical evidence for the formation of primary, bacterially induced lacustrine dolomite: La Roda 'white earth' (Pliocene, central Spain)

Upper Pliocene dolomites (‘white earth’) from La Roda, Spain, offer a good opportunity to evaluate the process of dolomite formation in lakes. The relatively young nature of the deposits could allow a link between dolomites precipitated in modern lake systems and those present in older lacustrine formations. The La Roda Mg‐carbonates (dolomite unit) occur as a 3·5‐ to 4‐m‐thick package of poorly indurated, white, massive dolomite beds with interbedded thin deposits of porous carbonate displaying root and desiccation traces as well as local lenticular gypsum moulds. The massive dolomite beds consist mainly of loosely packed 1‐ to 2‐μm‐sized aggregates of dolomite crystals exhibiting poorly developed faces, which usually results in a subrounded morphology of the crystals. Minute rhombs of dolomite are sparse within the aggregates. Both knobbly textures and clumps of spherical bodies covering the crystal surfaces indicate that bacteria were involved in the formation of the dolomites. In addition, aggregates of euhedral dolomite crystals are usually present in some more clayey (sepiolite) interbeds. The thin porous carbonate (mostly dolomite) beds exhibit both euhedral and subrounded, bacterially induced dolomite crystals. The carbonate is mainly Ca‐dolomite (51–54 mol% CaCO₃), showing a low degree of ordering (degree of ordering ranges from 0·27 to 0·48). Calcite is present as a subordinate mineral in some samples. Sr, Mn and Fe contents show very low correlation coefficients with Mg/Ca ratios, whereas SiO₂ and K contents are highly correlated. δ¹⁸O‐ and δ¹³C‐values in dolomites range from ?3·07‰ to 5·40‰ PDB (mean=0·06, σ=1·75) and from ?6·34‰ to ?0·39‰ PDB (mean=?3·55, σ=1·33) respectively. Samples containing significant amounts of both dolomite and calcite do not in general show significant enrichment or depletion in ¹⁸O and ¹³C between the two minerals. The correlation coefficient between δ¹⁸O and δ¹³C for dolomite is extremely low and negative (r=?0·05), whereas it is higher and positive (r=0·47) for calcite. The lacustrine dolomite deposit from La Roda is interpreted mainly as a result of primary precipitation of dolomite in a shallow, hydrologically closed perennial lake. The lake was supplied by highly saturated HCO₃^?/CO₃^2? groundwater that leached dolomitic Mesozoic formations. Precipitation of dolomite from alkaline lake waters took place under a semi‐arid to arid climate. However, according to our isotopic data, strong evaporative conditions were not required for the formation of the La Roda dolomite. A significant contribution by bacteria to the formation of the dolomites is assumed in view of both petrographic and geochemical evidence.     

Palaeoenvironmental reconstruction of a middle Miocene alluvial fan to cyclic shallow lacustrine depositional system in the Calatayud Basin (NE Spain)

ABSTRACT The middle Miocene sedimentary fill of the Calatayud Basin in north‐eastern Spain consists of proximal to distal alluvial fan‐floodplain and shallow lacustrine deposits. Four main facies groups characteristic of different sedimentary environments are recognized: (1) proximal and medial alluvial fan facies that comprise clast‐supported gravel and subordinate sandstone and mudstone, the latter exhibiting incipient pedogenic features; (2) distal alluvial fan facies, formed mainly of massive mudstone, carbonate‐rich palaeosols and local carbonate pond deposits; (3) lake margin facies, which show two distinct lithofacies associations depending on their distribution relative to the alluvial fan system, i.e. front (lithofacies A), comprising massive siliciclastic mudstone and tabular carbonates, or lateral (lithofacies B) showing laminated and/or massive siliciclastic mudstone alternating with tabular and/or laminated carbonate beds; and (4) mudflat–shallow lake facies showing a remarkable cyclical alternation of green‐grey and/or red siliciclastic mudstone units and white dolomitic carbonate beds. The cyclic mudflat–shallow lake succession, as exposed in the Orera composite section (OCS), is dominantly composed of small‐scale mudstone–carbonate/dolomite cycles. The mudstone intervals of the sedimentary cycles are interpreted as a result of sedimentation from suspension by distal sheet floods, the deposits evolving either under subaerial exposure or water‐saturated conditions, depending on their location on the lacustrine mudflat and on climate. The dolomite intervals accumulated during lake‐level highstands with Mg‐rich waters becoming increasingly concentrated. Lowstand to highstand lake‐level changes indicated by the mudstone/dolomite units of the small‐scale cycles reflect a climate control (from dry to wet conditions) on the sedimentation in the area. The spatial distribution of the different lithofacies implies that deposition of the small‐scale cycles took place in a low‐gradient, shallow lake basin located in an interfan zone. The development of the basin was constrained by gradual alluvial fan aggradation. Additional support for the palaeoenvironmental interpretation is derived from the isotopic compositions of carbonates from the various lithofacies that show a wide range of δ¹⁸O and δ¹³C values varying from ?7·9 to 3·0‰ PDB and from ?9·2 to ?1·7‰ PDB respectively. More negative δ¹⁸O and δ¹³C values are from carbonate‐rich palaeosols and lake‐margin carbonates, which extended in front of the alluvial fan systems, whereas more positive values correspond to dolomite beds deposited in the shallow lacustrine environment. The results show a clear trend of δ¹⁸O enrichment in the carbonates from lake margin to the centre of the shallow lake basin, thereby also demonstrating that the lake evolved under hydrologically closed conditions.     

Palaeoceanographic controls on reef deposition: the Messinian Cariatiz reef (Sorbas Basin, Almería, SE Spain)

The Cariatiz section lies at the toe of the palaeoslope of the Messinian Cariatiz fringing reef, at the northern margin of the Neogene Sorbas Basin in SE Spain. Distal-slope reef deposits in the upper part of the section can be traced laterally to the reef core of the last episodes of reef progradation. The underlying deposits are alternating diatomitic marl, marl and silty marl that intercalate with sandstone beds. Combined lithological changes, variations in proportions of warm-water planktic foraminifera and δ 18O values suggest that at least seven, probably precessional, cycles are recorded throughout the Cariatiz section. The correlation of seven cycles in the pelagic deposits to seven reef progradation cycles, and associated vertical shifts in reef facies, indicates relative sea-level oscillations of several tens of metres. Biostratigraphic and palaeomagnetic data suggest that both the Cariatiz section and the fringing reef formed during the reverse polarity Chron C3r. Surface-water temperatures seem to be the major factor controlling carbonate production in the reef system. Deposition of bioclastic calcirudite and calcarenite, with no active coral growth, took place at the lowest sea-level within each reef cycle during temperature minima within each precessional cycle. Porites framework and reef-slope deposits with Halimeda gravel, in contrast, formed during temperature rises and thermal maxima within precessional cycles.     

Large to intermediate-scale aquifer heterogeneity in fine-grain dominated alluvial fans (Cenozoic As Pontes Basin,northwestern Spain): insight based on three-dimensional geostatistical reconstruction

Facies reconstructions are used in hydrogeology to improve the interpretation of aquifer permeability distribution. In the absence of sufficient data to define the heterogeneity due to geological processes, uncertainties in the distribution of aquifer hydrofacies and characteristics may appear. Geometric and geostatistical methods are used to understand and model aquifer hydrofacies distribution, providing models to improve comprehension and development of aquifers. However, these models require some input statistical parameters that can be difficult to infer from the study site. A three-dimensional reconstruction of a kilometer scale fine-grain dominated Cenozoic alluvial fan derived from more than 200 continuously cored, closely spaced, and regularly distributed wells is presented. The facies distributions were reconstructed using a genetic stratigraphic subdivision and a deterministic geostatistical algorithm. The reconstruction is only slightly affected by variations in the geostatistical input parameters because of the high-density data set. Analysis of the reconstruction allowed identification in the proximal to medial alluvial fan zones of several laterally extensive sand bodies with relatively higher permeability; these sand bodies were quantified in terms of volume, mean thickness, maximum area, and maximum equivalent diameter. These quantifications provide trends and geological scenarios for input statistical parameters to model aquifer systems in similar alluvial fan depositional settings.     

Iron isotopes in acid mine waters and iron-rich solids from the Tinto–Odiel Basin (Iberian Pyrite Belt, Southwest Spain)

The isotopic composition of Fe was determined in water, Fe-oxides and sulfides from the Tinto and Odiel Basins (South West Spain). As a consequence of sulfide oxidation in mine tailings both rivers are acidic (1.45 < pH < 3.85) and display high concentrations of dissolved Fe (up to 420 mmol l^− 1) and sulphates (up to 1190 mmol l^− 1).The δ⁵⁶Fe of pyrite-rich samples from the Rio Tinto and from the Tharsis mine ranged from − 0.56 ± 0.08‰ to + 0.25 ± 0.1‰. δ⁵⁶Fe values for Fe-oxides precipitates that currently form in the riverbed varied from − 1.98 ± 0.10‰ to 1.57 ± 0.08‰. Comparatively narrower ranges of values (− 0.18 ± 0.08‰ and + 0.21 ± 0.14‰) were observed in their fossil analogues from the Pliocene–Pleistocene and in samples from the Gossan (the oxidized layer that formed through exposure to oxygen of the massive sulfide deposits) (− 0.36 ± 0.12‰ to 0.82 ± 0.07‰). In water, δ⁵⁶Fe values ranged from − 1.76 ± 0.10‰ to + 0.43 ± 0.05‰.At the source of the Tinto River, fractionation between aqueous Fe(III) and pyrite from the tailings was less than would be expected from a simple pyrite oxidation process. Similarly, the isotopic composition of Gossan oxides and that of pyrite was different from what would be expected from pyrite oxidation. In rivers, the precipitation of Fe-oxides (mainly jarosite and schwertmannite and lesser amounts of goethite) from water containing mainly (more than 99%) Fe(III) with concentrations up to 372 mmol l^− 1 causes variable fractionation between the solid and the aqueous phase (− 0.98‰ < Δ⁵⁶Fe_{solid–water} < 2.25‰). The significant magnitude of the positive fractionation factor observed in several Fe(III) dominated water may be related to the precipitation of Fe(III) sulphates containing phases.     

Fluvial morphology and reservoir sand-body architecture in lacustrine rift basins with axial and lateral sediment supplies: Oligocene fluvial–lacustrine succession in the Xihu sag,East China Sea Shelf Basin

Abstract

The Xihu sag, which is the largest petroliferous sub-basin of the East China Sea Shelf Basin, formed in a continental back-arc setting. The Oligocene Huagang Formation consisting of a fluvial–lacustrine succession deposited during the compressional stage is the prime hydrocarbon-bearing interval in the Xihu sag. A third-order sequence-stratigraphic framework has been built, and component sand-body characteristics were investigated based on seismic attribute analysis and well-log correlation. Two overall upward-fining sequences, and an internal low-accommodation systems tract (LAST) (fluvial successions characterised by amalgamated fluvial channel sand bodies interlayered with rare overbank deposits) and high-accommodation systems tract (HAST) (intervals dominated by overbank or lacustrine deposits) have been identified. The thick, multi-storied channel-fill sandstone bodies deposited along the central depression belt, capped by extensive overbank or lacustrine mud deposits, characterise each sequence and form favourable reservoir–seal associations. Proximal-to-distal changes in lithofacies associations were also analysed. The sequence-stratigraphic and lithofacies analysis suggest the existence of an axial, large-scale river channel system in the Oligocene Xihu sag. On the basis of the restoration of basin geomorphology and seismic facies analysis, the depositional architectures of the axial paleodrainage system have been reconstructed. Overall, the Huagang sequences represent the sedimentary evolution of a large-scale fluvial system sourced from axial and lateral supply areas, to form river deltas into an interior-draining basin-centre lake. Two major fluvio-lacustrine transgression–regression cycles have been recorded. During the transgression cycle, the fluvial morphology was dominated by braided fluvial style; whereas during the regression cycle, the fluvial morphology was characterised by a combination of multiple fluvial channel styles in the LAST, from upstream to downstream low-sinuosity braided, high-sinuosity braided and anastomosing fluvial channel patterns were distributed and then replaced by large-scale lake flooding in the HAST. The braided channel centre, paleobathymetric lows of channel networks and delta-front bodies are sand-prone units. The fluvial sedimentation was governed by multiple parameters: tectonics, paleogeomorphology and climate fluctuations. This integrated study on fluvial sedimentation and evolution of the Oligocene drainage system enable us to propose a conceptual model depicting fluvial channel styles and component sand-body architecture in lacustrine rift basins with axial plus transverse sediment supplies. This model can serve as a reference to illustrate channel-sand-body and associated reservoir architecture in similar types of drainage systems in terrestrial basins.     

Environmental isotopes (18O, 2H, and 87Sr/86Sr) as a tool in groundwater investigations in the Keta Basin, Ghana

Analyses of environmental isotopes (¹⁸O, ²H, and ⁸⁷Sr/⁸⁶Sr) are applied to groundwater studies with emphasis on saline groundwater in aquifers in the Keta Basin, Ghana. The ⁸⁷Sr/⁸⁶Sr ratios of groundwater and surface water of the Keta Basin primarily reflect the geology and the mineralogical composition of the formations in the catchments and recharge areas. The isotopic compositions of ¹⁸O and ²H of deep groundwater have small variations and plot close to the global meteoric water line. Shallow groundwater and surface water have considerably larger variations in isotopic compositions, which reflect evaporation and preservation of seasonal fluctuations. A significant excess of chloride in shallow groundwater in comparison to the calculated evaporation loss is the result of a combination of evaporation and marine sources. Groundwaters from deep wells and dug wells in near-coastal aquifers are characterized by relatively high chloride contents, and the significance of marine influence is evidenced by well-defined mixing lines for strontium isotopes, and hydrogen and oxygen stable isotopes, with isotopic compositions of seawater as one end member. The results derived from environmental isotopes in this study demonstrate that a multi-isotope approach is a useful tool to identify the origin and sources of saline groundwater. Electronic Publication     

Climate and environment during the Younger Dryas (GS‐1) as reflected by composite stable isotope records of lacustrine carbonates at Torreberga,southern Sweden

Climatic and environmental changes during the Younger Dryas stadial (GS‐1) and preceding and following transitions are inferred from stable carbon and oxygen isotope records obtained from the sediments of ancient Lake Torreberga, southern Sweden. Event GS‐1 is represented in the sediment sequence by 3.5 m of clay containing lacustrine carbonates of various origins. Comparison of isotopic records obtained on mollusc shells, ostracod valves, and Chara encrustations precipitated during specific seasons of the year supports estimates of relative changes in both lake water and mean annual air temperatures. Variations in soil erosion rates can also be estimated from a simple isotope–mass‐balance model to separate allochthonous and autochthonous carbonate contributions to the bulk carbonate content of the sediments. The well‐known, rapid climatic shifts characterising the Last Termination in the North Atlantic region are clearly reflected in the isotopic data, as well as longer‐term changes within GS‐1. Following maximum cooling shortly after the Allerød–Younger Dryas (GI‐1–GS‐1) transition, a progressive warming and a slight increase in aquatic productivity is indicated. At the Younger Dryas–Preboreal (GS‐1–PB) transition mean annual air temperature rapidly increased by more than 5°C and summer lake‐water temperature increased by ca. 12°C. The subsequent Preboreal oscillation is characterised by an increase in soil erosion and a slight decrease in mean annual air temperature. These results are in harmony with recent findings about large‐scale climate dynamics during the Last Termination. Copyright © 1999 John Wiley & Sons, Ltd.     

Evaporative systems and diagenetic patterns in the Calatayud Basin (Miocene,central Spain)

This paper concerns the evaporite units, depositional systems, cyclicity, diagenetic products and anhydritization patterns of the Calatayud Basin (nonmarine, Miocene, central Spain). In outcrop, the sulphate minerals of these shallow lacustrine evaporites consist of primary and secondary gypsum, the latter originating from the replacement of anhydrite and glauberite. In the evaporative systems of this basin, gypsiferous marshes of low salinity can be distinguished from central, saline lakes of higher salinity. In the gypsiferous marsh facies, the dominant, massive, bioturbated gypsum was partly replaced by synsedimentary chert nodules and siliceous crusts. In the saline lake facies, either cycles of gypsiferous lutite‐laminated gypsarenite or irregular alternations of laminated gypsum, nodular and banded glauberite, thenardite and nodular anhydrite precipitated. Early replacement of part of the glauberite by anhydrite also occurred. Episodes of subaerial exposure are represented by: (1) pedogenic carbonates (with nodular magnesite) and gypsiferous crusts composed of poikilitic crystals; and (2) nodular anhydrite, which formed in a sabkha. Additionally, meganodular anhydrite occurs, which presumably precipitated from ascending, highly saline solutions. The timing of anhydritization was mainly controlled by the salinity of the pore solutions, and occurred from the onset of deposition to moderate burial. Locally, a thick (>200 m) sequence of gypsum cycles developed, which was probably controlled by climatic variation. A trend of upward‐decreasing salinity is deduced from the base to the top of the evaporite succession.     

3D and 4D controls on carbonate depositional systems: sedimentological and sequence stratigraphic analysis of an attached carbonate platform and atoll (Miocene, Níjar Basin, SE Spain)

This study investigates the controls on three-dimensional stratigraphic geometries and facies of shallow-water carbonate depositional sequences. A 15 km² area of well-exposed Mid to Late Miocene carbonates on the margin of the Níjar Basin of SE Spain was mapped in detail. An attached carbonate platform and atoll developed from a steeply sloping basin margin over a basal topographic unconformity and an offshore dacite dome (Late Miocene). The older strata comprise prograding bioclastic (mollusc and coralline algae) dominated sediments and later Messinian Porites reefs form prograding and downstepping geometries (falling stage systems tract). Seven depositional sequences, their systems tracts and facies have been mapped and dated (using Sr isotopes) to define their morphology, stratigraphic geometries, and palaeo-environments. A relative sea-level curve and isochore maps were constructed for the three Messinian depositional sequences that precede the late Messinian evaporative drawdown of the Mediterranean. The main 3D controls on these depositional sequences are interpreted as being: (i) local, tectonically driven relative sea-level changes; (ii) the morphology of the underlying sequence boundary; (iii) the type of carbonate producers [bioclastic coralline algal and mollusc-dominated sequences accumulated in lows and on slopes of < 14° whereas the Porites reef-dominated sequence accumulated on steep slopes (up to 25°) and shallow-water highs]. Further controls were: (iv) the inherited palaeo-valleys and point-sourced clastics; (v) the amount of clastic sediments; and (vi) erosion during the following sequence boundary development. The stratigraphy is compared with that of adjacent Miocene basins in the western Mediterranean to differentiate local (tectonics, clastic supply, erosion history, carbonate-producing communities) versus regional (climatic, tectonic, palaeogeographic, sea-level) controls.     

Carbonate tufas as archives of climate and sedimentary dynamic in volcanic settings,examples from Gran Canaria (Spain)

Three Holocene tufas from Gran Canaria volcanic island were studied with the aim of deciphering their sedimentary evolution through space and time. Las Temisas tufa (south-eastern arid part of the island) is dominantly composed of oncoids, intraclasts, phytoclasts, coated stems, minor thin stromatolites, and a high amount of siliciclastics. It was deposited in a fluvial system with variable flow velocities and palustrine conditions areas, which alternated with high energy events. Azuaje tufa (northern humid part of the island) is composed of coated stems, stromatolites, oncoids and phytoclasts, with relatively low amounts of siliciclastics, suggesting slow-flowing and palustrine conditions and a relatively low incidence of (high energy) floodings. Los Berrazales tufa (north-west of Gran Ganaria, the most humid one), is mainly composed of coated stems and crystalline crusts, formed in a laminar flow regime. Dominant clastic sedimentation in Las Temisas and high calcite growth rates in Los Berrazales led to a poor development of stromatolites in comparison with Azuaje. Las Temisas and Azuaje deposits have similar upward evolution with decreasing trend in siliciclastics and increasing trend in carbonates. However, Las Temisas has higher siliciclastic and lower phytoclastic contents suggesting a less vegetated area and more arid climate than in the other deposits. Additionally, tufas record local events common in volcanic terrains. Azuaje presents three units bounded by erosive discontinuities, which reveal significant erosion by enhanced runoff that could be caused by loss of vegetation due to wildfires related to volcanic eruptions at headwaters. Las Temisas record a possible interruption in sedimentation represented by aligned boulders due to rockfalls from the hillsides. These deposits formed from waters with similar chemistry providing to the carbonates their similar signals in δ¹³C–δ¹⁸O stable isotopes and ⁸⁷Sr/⁸⁶Sr ratios like that of the volcanic rocks. This work shows how, in volcanic areas, tufas are unique archives of the climate, vegetation and volcanic-related processes, because all imprint the sedimentary regime of tufa deposition.     

Syn-sedimentary hydrothermal dolomites in a lacustrine rift basin: Petrographic and geochemical evidence from the lower Cretaceous Erlian Basin,Northern China

Dolomites occur extensively in the lower Cretaceous along syn-sedimentary fault zones of the Baiyinchagan Sag, westernmost Erlian Basin, within a predominantly fluvial–lacustrine sedimentary sequence. Four types of dolomite are identified, associated with hydrothermal minerals such as natrolite, analcime and Fe-bearing magnesite. The finely-crystalline dolomites consist of anhedral to subhedral crystals (2 to 10 μm), evenly commixed with terrigenous sediments that occur either as matrix-supporting grains (Fd1) or as massive argillaceous dolostone (Fd2). Medium-crystalline (Md) dolomites are composed of subhedral to euhedral crystals aggregates (50 to 250 μm) and occur in syn-sedimentary deformation laminae/bands. Coarse-crystalline (Cd) dolomites consist of non-planar crystals (mean size >1 mm), and occur as fracture infills cross-cutting the other dolomite types. The Fd1, Md and Cd dolomites have similar values of δ¹⁸O (−20·5 to −11·0‰ Vienna PeeDee Belemnite) and δ¹³C (+1·4 to +4·5‰ Vienna PeeDee Belemnite), but Fd2 dolomites are isotopically distinct (δ¹⁸O −8·5 to −2·3‰ Vienna PeeDee Belemnite; δ¹³C +1·4 to +8·6‰ Vienna PeeDee Belemnite). Samples define three groups which differ in light rare-earth elements versus high rare-earth elements enrichment/depletion and significance of Tb, Yb and Dy anomalies. Medium-crystalline dolomites have signatures that indicate formation from brines at very high temperature, with salinities of 11·8 to 23·2 eq. wt. % NaCl and T_h values of 167 to 283°C. The calculated temperatures of Fd1 and Cd dolomites extend to slightly lower values (141 to 282°C), while Fd2 dolomites are distinctly cooler (81 to 124°C). These results suggest that the dolomites formed from hydrothermal fluid during and/or penecontemporaneous with sediment deposition. Faults and fractures bounding the basin were important conduits through which high-temperature Mg-rich fluids discharged, driven by an abnormally high heat flux associated with local volcanism. It is thought that differing amounts of cooling and degassing of these hydrothermal fluids, and of mixing with lake waters, facilitated the precipitation of dolomite and associated minerals, and resulted in the petrographic and geochemical differences between the dolomites.     

Deep to shallow lacustrine evaporites in the Libros Gypsum (southern Teruel Basin, Miocene, NE Spain): an occurrence of pelletal gypsum rhythmites

ABSTRACT A number of non‐marine evaporite units composed of primary gypsum were deposited in saline lakes that developed in the southern Teruel Basin (NE Spain) during the Miocene. In the basin depocentre, a continuum of lacustrine evaporite lithofacies influenced by the activity of organisms is displayed. The Libros Gypsum was deposited in a deep lake, in which water stratification became unstable with progressive shoaling. Rhythmites, composed of laminae of pelletal gypsum and laminae of very fine lenticular gypsum crystals mixed with siliceous microorganisms, formed in addition to gypsum turbidites, intraformational gypsum breccias and slump structures. The pelletal laminae originated from the faecal activity of animals (crustaceans?) ingesting gypsum crystallites in the lake water during episodes of maximum evaporation, whereas the laminae of very fine lenticular gypsum mixed with microorganisms accumulated during episodes of relative dilution. In the wide marginal zones of the basin, the Libros Gypsum unit consists of massive to thin‐bedded bioturbated gypsum and thin‐bedded clotted gypsum, which formed in intermediate to very shallow (palustrine) water depths. The bioturbated gypsum lithofacies were produced by the action of diverse organisms, presumably worms and coleopterans, and chironomid larvae to a lesser extent; the massive lithofacies precipitated in very shallow water; and the thin‐bedded lithofacies formed in shallow to deeper settings. The thin‐bedded clotted gypsum is a relatively deep facies that may have diverse origins (e.g. bioturbation, compaction, disruption of soft sediments and early diagenesis). There is a well‐developed metre‐scale cyclicity in the marginal lake sequences, which is not observed in the inner lake deposits. This suggests a depth control in the various lacustrine subenvironments to record cyclic evaporitic processes. The isotopic composition of the gypsum indicates early sulphate‐reducing bacterial activity in the bottom of the lake and suggests that the sulphate was derived from the chemical recycling of Triassic evaporites of the country rocks.     

Changing lake dynamics and sequence stratigraphy of synrift lacustrine strata in a half-graben: an example from the Triassic Ischigualasto–Villa Unión Basin, Argentina

Well‐exposed Triassic rift strata from the Ischigualasto–Villa Unión Basin (NW Argentina) include a 80 to ca 515 m thick lacustrine‐dominated package that can be correlated across a half‐graben using key stratigraphic surfaces (sequence boundaries, lacustrine flooding surfaces and forced regressive surfaces). The characteristics of the synrift lacustrine fill in different parts of the half‐graben have been examined and the mechanisms controlling sedimentation inferred. A variety of sedimentary environments are recognized including; volcaniclastic floodplain, mildly saline lake and playa lake, offshore lacustrine, delta front to fluvial‐dominated and wave‐dominated deltas, distributary and fluvial channel, and interdistributary bay. The succession can be divided into four stratigraphic sequences (SS1 to SS4), the oldest of which (SS1) contains volcaniclastic, fluvial and saline lake deposits; it is thickest close to the western border fault zone, reflecting more rapid subsidence here. Accommodation exceeded sediment and water input during SS1. The second and third sequences (SS2 and SS3) mark the onset of widespread lacustrine sedimentation, reflecting a balance between accommodation creation and water and sediment fluxes. Sequences SS2 and SS3 are represented by offshore meromictic lacustrine and deltaic deposits, the latter mostly sourced from the flexural and southern axial margins of the half‐graben. The presence of stacked parasequences bound by lacustrine flooding surfaces is related to climatically induced lake‐level fluctuations superimposed on variable rates of subsidence on the controlling rift border fault zone. The youngest sequence (SS4) is represented by the deposits of littoral lacustrine and shallow shelf deltas distinguished by a change in lithofacies, palaeocurrents and sandstone composition, suggesting a switch in sediment supply to the footwall margin to the NW. The change in the sediment source is related to reduced footwall uplift, the possible presence of a relay ramp and/or supply from a captured antecedent drainage network. During SS4, the rate of creation of accommodation was exceeded by the sediment and water discharge. The stratigraphic evolution of lacustrine strata in the half‐graben was mainly controlled by tectonic processes, including subsidence rate and the growth and evolution of the border fault zone, but changing climate (inducing changes in water balance and lake level) and autocyclic processes (delta lobe switching) were also important.     

Middle pleistocene variations in palaeoclimate,palaeoenvironment and vegetation of the las tablas de daimiel national park (Spain)

The Middle Pleistocene palaeoclimate and palaeoenvironment evolution of the Las Tablas de Daimiel wetlands is described using a combination of sedimentology, pollen and δ¹³C and δ¹⁸O isotopic records of Unit B of core LT‐199906. This unit mostly contains fluvial and palustrine sediments. U/Th and amino acid racemization (AAR) dating and a comparison of the δ¹⁸O curve of Unit B with oceanic records suggests that Unit B spans the period from the end of Marine Isotope Stage (MIS) 10 (340 ka) to the first stages of MIS 7 (ca. 210 ka). MIS 9 was characterised by a regional vegetation dominated by Cupressaceae, with Pinus as a tree element. The water level was high and temperatures were very probably higher than during the Holocene. MIS 8 and the first substages of MIS 7 (7e, 7d and 7c) were dominated by xerophilous steppe vegetation in lowlands (elevations around 610 m above sea level) near to the wetland. At higher altitudes, far away from the wetland, there were fewer Pinus than in MIS 9, and a greater presence of warm, temperate and cool climate tree elements. The aquatic system in MIS 9 became shallower, with eutrophication and the accumulation of organic matter occurring; temperatures were similar to or lower than those of the Holocene. Copyright © 2011 John Wiley & Sons, Ltd.     

Aragonite stromatolitic buildups from Santorini (Aegean Sea,Greece): Geochemical and palaeontological constraints of the caldera palaeoenvironment prior to the Minoan eruption (ca 3600 yr bp)

The pyroclastic deposits of the Minoan eruption (ca 3600 yr bp ) in Santorini contain abundant xenoliths. Most of these deposits are calcareous blocks of laminated‐botryoidal, stromatolite‐like buildups that formed in the shallow waters of the flooded pre‐Minoan caldera; they consist of (i) light laminae, of fibrous aragonite arranged perpendicular to layering, and (ii) dark laminae, with calcified filaments of probable biological origin. These microstructures are absent in the light laminae, suggesting a predominant inorganic precipitation of aragonite on substrates probably colonized by microbes. Internal cavities contain loose skeletal grains (molluscs, ostracods, foraminifera and diatoms) that comprise taxa typical of shallow marine and/or lagoon environments. Most of these forms are typical of warm water environments, although no typical taxa from hydrothermal vents have been observed. Past gasohydrothermal venting is recorded by the occurrence of barite, pyrolusite and pyrite traces. The most striking features of the stable isotopic data set are: (i) an overall wide range in δ¹³C_PDB (0·16 to 12·97‰) with a narrower variation for δ¹⁸O_PDB (?0·23 to 4·33‰); and (ii) a relatively uniform isotopic composition for the fibrous aragonite (δ¹³C = 12·40 ± 0·43‰ and δ¹⁸O = 2·42 ± 0·77‰, n = 21). The δ¹³C and δ¹⁸O values from molluscs and ostracods display a covariant trend, which reflects a mixing between sea water and a fluid influenced by volcano‐hydrothermal activity. Accordingly, ⁸⁷Sr/⁸⁶Sr from the studied carbonates (0·708758 to 0·709011 in fibrous aragonite and 0·708920 to 0·708991 in molluscs) suggests that the aragonite buildups developed in sea water under the influence of a hydrothermal/volcanic source. Significant differences in trace elements have been detected between the fibrous aragonite and modern marine aragonite cements. The caldera water from which the fibrous aragonite crusts formed received an input from a volcano‐hydrothermal system, probably producing diffuse venting of volcanogenic CO₂ gas and of a fluid enriched in Ca, Mn and Ba, and depleted in Mg and probably in Sr.     

Geochemical,and stable and radiogenic isotope records in Devonian and Early Carboniferous carbonates from Valle de Tena,central Pyrenees (Spain): evidence for their diagenetic environments

Mineralogical, textural and geochemical investigations were made to determine the post-depositional evolution of Devonian and Early Carboniferous carbonates from Valle de Tena. The carbonate association is made up of low-Mg calcite, which occurs as micrite, spar cements, neomorphic patches and spar filling veinlets. Non-stoichiometric dolomite and ankerite occur as cements (dolomite also as replacements) in the Middle Devonian, post-dating calcite types. All these phases pre-date tectonic stylolites, indicating compaction after stabilization of the carbonate minerals. Strontium concentrations indicate that Early Devonian and Early Carboniferous micrites initially precipitated as aragonite; Middle and Late Devonian micrites precipitated as high-Mg calcites. Both precursors were diagenetically stabilized to low-Mg calcites through interaction with meteoric waters in phreatic environments. Trace elements in dolomite and ankerite indicate precipitation from Sr-enriched meteoric water. All studied carbonates, except Middle Devonian limestones, precipitated in reducing environments, which favoured incorporation of Fe and Mn. Late calcite generations precipitated from more saline waters than micrites. Light ¹⁸O values in micrites suggest alteration mainly in meteoric-phreatic environments. The dolomites and ankerites precipitated from more ¹⁸O-depleted fluids than the calcites, suggesting a greater contribution from meteoric waters. Variations in ¹³C of micrites represent primary secular trends, according to published ¹³C variations. The ¹³C oscillations within each succession probably relate to sea-level oscillations. Strontium isotopes also point to a meteoric origin of diagenetic fluids. Model calculations suggest that O and Sr isotopes equilibrated between calcites and fluid at relatively low water/rock ratios, whereas C isotopic signatures are inherited from limestones.     

Interplay between tectonics and compaction in a rift‐margin,lacustrine delta system: Miocene of the Eger Graben,Czech Republic

The Early Miocene Bílina Palaeodelta consists of fluvio‐deltaic and lacustrine clastics deposited along the south‐eastern margin of the extensional Most Basin, part of the Eger Graben in north Bohemia (Czech Republic). The Bílina succession shows evidence of repeated advances of an axial deltaic system across a thick accumulation of organic material and clay in the hangingwall of an active fault. Exposures up to ca 4·5 km long in the Bílina open‐cast mine help bridge the gap between seismic scale and typical outcrop scale of observation and thus allow the relationships between small‐scale and basin‐scale stratal geometries to be evaluated. The Bílina Palaeodelta deposits include sand‐dominated, fluvial channel fills and heterolithic sheets interpreted as delta plain strata, sand‐dominated mouth‐bar wedges and heterolithic sheets of prodeltaic deposits, passing distally into lacustrine clays. The depositional environment is interpreted as a fluvial‐dominated, mixed‐load, lacustrine delta with a high degree of grain‐size segregation at the feeder‐channel mouths. On the largest temporal and spatial scales, variable tectonic subsidence controlled the overall advance and retreat of the delta system. The medium‐term transgressive‐regressive history was probably driven by episodes of increased subsidence rate. However, at this temporal scale, the architecture of the deltaic sequences (deltaic lobes and correlative lacustrine deposits) was strongly affected by: (i) compaction of underlying peat and clay which drove lateral offset stacking of medium‐term sequences; and (ii) growth of a fault‐propagation fold close to the active Bílina Fault. At the smallest scale, the geometries of individual mouth bars and groups of mouth bars (short‐term sequences) reflect the interaction among sediment loading, compaction and growth faulting that produced high‐frequency relative lake‐level fluctuations and created local accommodation at the delta front.     

Crustal contamination and fluid/rock interaction in the carbonatites of Fuerteventura (Canary Islands, Spain): a C, O, H isotope study

Fuerteventura—the second largest of the Canary Islands consists of Mesozoic sediments, submarine volcanic rocks, dike swarms and plutons of the Basal Complex, and younger subaerial basaltic and trachytic series. Carbonatites are found in two Basal Complex exposures: the Betancuria Massif in the central part of the island and the Esquinzo area in the north. values of the carbonatites increase progressively from south to north of the island. This phenomenon is attributed to different degrees of assimilation of sedimentary carbonate. Homogeneous, typically magmatic values for carbonatites which have preserved primary igneous textures and minerals suggest a well-mixed reservoir where changes in values result from the storage of carbonate magmas at different structural levels. The magma storage allowed assimilation of sediment to varying degrees before final emplacement of carbonatites. Shifts in towards more positive and negative values from presumed primary compositions are observed in the carbonatites. On the basis of the oxygen isotope compositions of calcite, mica and K-feldspar, and the hydrogen isotope compositions of micas, the changes in the values of the carbonatites can be related to fluid/rock interactions.     

Interacting tectonics,hydrogeology and karst processes in an intramontane basin: the Jiloca graben (NE Spain)

The Jiloca basin is a NNW–SSE trending, Neogene-Quaternary graben in NE Spain, bounded by normal faults with measurable hectometre-scale throws. Its overall trend truncates previous NW–SE folds. The sedimentary infilling includes Neogene and Quaternary deposits, exceeding 80 m in thickness. The stratigraphical and structural setting controls hydrogeology of the basin. Neogene marls constitute an aquiclude that separates a main Jurassic karstic, confined aquifer from a shallow, unconfined Plio-Quaternary aquifer. The Jurassic aquifer is laterally compartmented by impervious Upper Triassic anticline cores, though its piezometric surface usually lies 30–60 m higher than the Mesozoic-Neogene boundary. The geological, and specifically the hydrogeological features are not significantly compatible with a previously published hypothesis that considers the Jiloca depression as a polje (in which the final topography is the result of suballuvial karstic corrosion) for three reasons. First, the hypothetical corrosion front shows neither a specific relationship with the epiphreatic zone, nor control by the local presence of impervious Triassic rocks. Second, chemistry of groundwater at the underlying Jurassic aquifer would not allow limestone dissolution at rates necessary for producing the supposed erosion deepening of 300 m since the late Pliocene. Finally, no evidence of swallow holes or ponors has been found.