雅拉香波穹隆韧性剪切带变形特征与剪切作用类型研究

雅拉香波变质核杂岩位于北喜马拉雅穹隆带东端，其拆离断层系的糜棱岩带构成了杂岩核部的外缘，带内主要变形岩石类型为石榴石千糜岩、糜棱状片麻岩和糜棱状花岗岩．糜棱状岩石中宏、微观韧性变形组构丰富，暗示区内存在多种显微变形机制：物质扩散迁移、晶内脆性破裂、粒内滑动及粒间滑动等，3种运动学涡度统计和计算结果表明：雅拉香波变质核杂岩拆离系的剪切作用类型是以简单剪切作为主的一般剪切；剪切带厚度变化为76％左右，属于减薄型：后期纯剪切应变速率比早期的有所增强，这可能与杂岩体核部岩浆岩后期上侵增强，穹隆进一步抬升和脆性垮塌下滑作用相关．     

Fluid flow,metasomatism and amphibole deformation in an imbricated ophiolite,North Cascades,Washington

Metasomatic tremolite-rich mylonites are widespread in imbricate thrust slices of ultramafic rocks of the ophiolitic Ingalls Complex in Washington State. Protoliths for these amphibolite-facies mylonites were peridotite and serpentinite. Abundant syntectonic tremolite veins in the ultramafites record narrowly channelized flow of infiltrating fluids, whereas metasomatic mylonite zones record more pervasive flow. Fluids were probably released mainly by prograde devolatization reactions within serpentinite and mafic ophiolitic rocks that experienced earlier hydrothermal metamorphism.Olivine apparently deformed by dislocation creep in the mylonites. In the tremolite-rich rocks, locally preserved amphibole porphyroclasts deformed mainly by microfracturing. Acicular tremolites, which dominate the mylonites, form syntectonic overgrowths on porphyroclasts and probably record diffusive mass transfer which may have accompanied cataclasis. Acicular tremolites subsequently were folded and define both post-crystalline crenulations and polygonal arcs.Fluid flow, deformation and metamorphism were apparently complexly interrelated in the imbricate zone. Thrusts juxtaposed contrasting rock types that were sources and sinks for fluids, and shear zones focused fluid flow. Metamorphism probably facilitated deformation through the release of fluids during dehydration reactions. High fluid pressure may have led to hydraulic fracturing and may have controlled strain softening in the tremolitic mylonite zones as it favored microcracking and diffusive mass transfer over dislocation creep. Infiltrating metasomatic fluids probably play an important role in the evolution of shear zones in many ultramafic bodies during medium-grade metamorphism.     

Deformation and recrystallisation of orthopyroxene from the giles complex, Central Australia

The microstructures and fabrics of naturally deformed orthopyroxenites from the Giles Complex, central Australia are described in some detail. Coarse grained enstatite is deformed and recrystallised where it is incorporated in planar gneissic (mylonite) zones which show a gradation in strain from their margins inwards. Deformation takes place by slip on (100) [001] to produce regular lattice bending and kinking, and recrystallisation takes place preferentially along grain boundaries and kink band boundaries (KBB's). The microstructures and preferred orientation of recrystallised grains along KBB's are interpreted in terms of possible nucleation mechanisms, and both bulge nucleation (Bailey and Hirsch, 1962) and subgrain coalescence (Hu, 1963) are likely contributors. Electron microprobe analyses have indicated a small compositional difference between new (recrystallised) and host (deformed) grains, which is related to the nucleation mechanism. The total preferred orientation patterns for host and new grains are discussed with special reference to previous measurements and interpretations.     

Geology of the Lick Observatory Quadrangle,California

The Lick Observatory 7.5-minute quadrangle exposes evidence of geologic events that range from subduction of Mesozoic Franciscan Complex, through accumulation of marine Miocene porcellanite and clastics, to the development of the San Andreas fault system and deformation within it. The active Calaveras fault zone, with its linear valleys and subparallel strike-slip strands, transects the quadrangle and, northwest of San Filipe Valley, joins and incorporates the older Madrone Springs fault. The topography has formed in the past 1 to 2 million years and rises northeastward from the East Evergreen range-front thrust, across the Calaveras and several inferred mountain-building faults, to the 1280 m crest of Mt. Hamilton.

The stratigraphy includes coherent, variously schistose metagraywacke of the late Mesozoic Franciscan Complex; discordant zones of melange of sheared shale and blocks that include blueschist and eclogite; serpentine that may represent the Coast Range Ophiolite; relatively undeformed sandstone, shale, and conglomerate of the late Mesozoic Great Valley sequence; marine Miocene Claremont Porcellanite, mudstone, and Briones Sandstone; and deformed nonmarine gravels of the Pleistocene and Pliocene Santa Clara Formation.

The Franciscan sandstones are complexly deformed and discordantly transected by tectonically emplaced melange zones; a local chert mass marks the remnant of a discordantly overlying thrust sheet. Southwest of the Calaveras zone, folded Miocene rocks are faulted over the more strongly deformed Great Valley sequence. Those rocks, in turn, are thrust over small windows of Franciscan rock, and the entire mountain mass is thrust over Santa Clara gravels at the foot of the range. These latter structures postdate the 3.5 Ma imposition of compression across the plate margin suggested by plate tectonic reconstructions.     

Element mobility associated with syn-metamorphic shear zones near Scotchport, NW Mayo, Ireland

Abstract Three major blastomylonitic synmetamorphic (epidote amphibolite to mid amphibolite facies) shear zones are seen on the NW coast of the Mullet Peninsula in NW Mayo. These shear zones occur at the contacts of major structural units and in an imbricated slice where rocks of the Erris Complex are deformed and chemically modified. Chemical changes associated with individual shear zones have been deduced by comparing the compositions of various gneisses both within and adjacent to the shear zones. Compositional changes are different in the constituent rock-types within each unit and many elements normally considered immobile have been selectively mobilized within the shear zones. Little evidence of wholesale metasomatic introduction of components into these shear zones was found to accompany the selective mobilization.     

Zircon U–Pb SHRIMP dating of gneissic basement of the Dom Feliciano Belt, southernmost Brazil

The age of a basement gneiss of the Dom Feliciano Belt along the coast of Rio Grande do Sul has been determined by zircon U–Pb SHRIMP to be about 2.08 Ga for the K-granitic magmatism and 800–590 Ma for the associated low-angle and sub-vertical shear zone deformations. The gneiss is the G3 granitic phase of the Arroio dos Ratos Complex of previous authors, and it now defines a geotectonic environment of juvenile accretion of island arcs in the Paleoproterozoic. The superposition of deformation events during the Neoproterozoic precludes the precise determination of the age of each event in this investigation, but we suggest that the collisional low-angle shear zones occurred at ca. 800 Ma and the sub-vertical shear zones at ca. 600 Ma. Th/U ratios are typically magmatic (about 0.4) in the homogeneous cores of zircons (about 2000 Ma), but are metamorphic (0.01) in the zoned euhedral rims (about 590 Ma).All the Paleoproterozoic gneisses in the region are part of the Encantadas Complex. Archean units, such as the Santa Maria Chico granulites, were all deformed in this major event of the Transamazonian Cycle. The dated gneiss may be correlative with the Epupa Complex north and south of the Kaoko Belt of SW Africa. Ages of the Neoproterozoic deformation are younger in the Kaoko Belt of Namibia than in its Brazilian counterpart.     

定结地区韧性剪切带变形特征与糜棱岩研究

定结地区位于喜马拉雅造山带中段 ,发育有多方向、多尺度、多层次、多期次的韧性剪切带。在剪切带中 ,各种韧性变形组构极为丰富 ,表明剪切带岩石的变形主要为韧性变形机制所致。变形岩石类型为花岗质糜棱岩、长英质糜棱岩和硅质糜棱岩 ;由于岩石受糜棱岩化作用程度的不同 ,在韧性剪切带中发育糜棱岩化岩石、初糜棱岩、糜棱岩及超糜棱岩 ;剪切带岩石的变形温度为 2 0 8～ 5 5 9℃。     

CHARACTERIZATION OF DEFORMATION AND X-RAY PETROFABRICS IN THE MIDDLE PART OF THE WAHONGSHAN FAULT ZONE, QINGHAI PROVINCE, NORTHWESTERN CHINA

The Wahongshan fault zone in Qinghai province is one of the most important faults in westem China. In this paper, deformation and X-ray petrofabrics have been studied in the middle segment of the fault. The results show that the formation of the fault zones can be divided into two major stages: ductile shear deformation stage and brittle deformation stage. The early stage ductile shearing leads to the formation of the NW-NNW trending mylonite zones along the fault, which is intensely cut by the late-formed brittle faults. X-ray petrofabrics of rocks near the faults indicate that the minerals in the tectonites show a great degree of orientation in the alignment. The quartz, which is a very important mineral in the tectonites, is deformed by basal face gliding or near basal face gliding, and sometimes by prismatic face sliding, which indicates that the rocks are deformed in epithermal to mesothermal or mesothermal environment, and the dynamic recrystallization also plays an important role in the formation     

Geometric consequences of ductile fabric development from brittle shear faults in mafic melt sheets: Evidence from the Sudbury Igneous Complex,Canada

Compared to felsic igneous rocks the genetic relationship between brittle and ductile fabric development and its influence on the geometry of deformed mafic melt sheets has received little attention in structural analyses. We explore these relationships using the Sudbury Igneous Complex (SIC) as an example. The SIC is the relic of a layered impact melt sheet that was transformed into a fold basin, the Sudbury Basin, during Paleoproterozoic deformation at the southern margin of the Archean Superior Province. We studied brittle and ductile strain fabrics on the outcrop and map scales in the southern Sudbury Basin, notably in the Norite and Quartz Gabbro layers of the SIC. Here, deformation is heterogeneous and occurred under variable rheological conditions, evident by the development of brittle shear fractures, brittle-ductile shear zones and pervasive ductile strain. The mineral fabrics formed under low- to middle greenschist-facies metamorphism, whereby brittle deformation caused hydrolytic weakening and ductile fabric development. Principal strain axes inferred from all structural elements are collinear and point to a single deformation regime that led to thinning of SIC layers during progressive deformation. Ductile fabric development profoundly influenced the orientation of SIC material planes, such as lithological contacts and magmatic mineral fabrics. More specifically, these planar structural elements are steep where the SIC underwent large magnitudes of thinning, i.e., in the south limb of the Sudbury Basin. Here, the actual tilt component of material planes is likely smaller than its maximum total rotation (60°) inferred from inclined igneous layering in the Norite. Our field-based study shows that ductile fabric development from brittle faults can have a profound influence on the rotational components of primary material planes in deformed igneous melt sheets.     

中-哈-吉-乌天山变形带容矿金矿床:成矿环境和控矿要素与找矿标志

天山是全球第二大金矿富集区,世界级和大型-超大型金矿床东西成带横贯中国新疆中部—哈萨克斯坦东南部—吉尔吉斯斯坦—乌兹别克斯坦,构成巨型跨境金成矿带。天山巨型跨境金成矿带和重要金矿床形成的地质环境、成矿的控制要素、找矿勘查的标志都是学术界和工业界高度关注的重大地质和找矿问题。通过广泛、深入地文献调研和境内外天山较全面野外地质矿产调查与研究,本文认为中-哈-吉-乌天山大规模金成矿主体形成于晚石炭世—早二叠世古亚洲洋闭合后的陆块拼贴变形过程,部分形成于中—晚二叠世陆内走滑变形过程。中天山南、北缘古缝合带及其附近的大型脆性/韧-脆性变形带是巨量金成矿的关键控制因素,多期叠加复合成矿是天山变形带容矿金矿床的显著特征。地壳初始富集、构造变形活化、岩浆热液叠加是天山变形带容矿金矿床的主控因素。“碳质细碎屑岩+脆韧性变形带+海西末期岩体”是中-哈-吉-乌天山变形带容矿大型-超大型金矿的找矿标志组合。     

The deformation patterns of two Archaean greenstone belts in Rhodesia and Botswana

Variations in intensity of deformation have been examined in the Fort Victoria greenstone belt in southern Rhodesia and in the Tati belt in northeast Botswana, both of which are on the diffuse northern border of the Limpopo mobile belt. Much of the deformation is related to widespread Limpopo events, and not to diapiric granite intrusions previously considered of major importance in the development of the Early Precambrian crust.Variations in intensity of deformation are due to the form of the major structures and to localised major ductile shear zones which cut both granites and greenstone belts. The pattern of deformation within the belts depends partly on how the granites behaved. Whether the schist belts deformed homogeneously or were part rotated and cut by shear zones depended on whether the granites deformed homogenously with the schist belt matrix or whether they were deformed by block sliding.     

Macro and microstructures as indicators of the development of syntectonic granitoids and host rocks in the Camboriú region,Santa Catarina,Brazil

In the northeastern Dom Feliciano Belt, Santa Catarina/Brazil, Paleoproterozoic rocks (mainly the Camboriú Complex) and Neoproterozoic granitoids – with the older Itapema Granite and the younger Corre-mar, Rio Pequeno and Serra dos Macacos granites – experienced a deformation history from magmatic to greenschist facies temperatures, under different rheological conditions. The concordance of flat amphibolite facies structures of the Camboriú Complex and magmatic and subsolidus structures in the Itapema Granite indicate the late-tectonic character of the latter. Based on tectonic features, the Corre-mar Granite is interpreted as older than the Rio Pequeno Granite and as related to transcurrent tectonics of the Southern Brazilian Shear Belt.In all granites, microstructures point to widespread magmatic alignment, followed by weak subsolidus and, locally, amphibolite to greenschist facies deformation. Magmatic foliations are progressively weaker in the younger granites. Synmagmatic shear zones in the Rio Pequeno Granite are possibly concentrated at the intrusive contact. The weak solid-state deformation at late-magmatic conditions argues for magmatism within a low-strain zone, which is compatible with the location of the area relative to the Major Gercino and Itajaí shear zones. The amphibolite to greenschist facies deformation structures are attributed to continuous deformation within the same low-strain zone during decreasing temperatures.     

Tectonic zoning of Wrangel Island,Arctic region

The Northern, Central, and Southern zones are distinguished by stratigraphic, lithologic, and structural features. The Northern Zone is characterized by Upper Silurian–Lower Devonian sedimentary rocks, which are not known in other zones. They have been deformed into near-meridional folds, which formed under settings of near-latitudinal shortening during the Ellesmere phase of deformation. In the Central Zone, mafic and felsic volcanic rocks that had been earlier referred to Carboniferous are actually Neoproterozoic and probably Early Cambrian in age. Together with folded Devonian–Lower Carboniferous rocks, they make up basement of the Central Zone, which is overlain with a angular unconformity by slightly deformed Lower (?) and Middle Carboniferous–Permian rocks. The Southern Zone comprises the Neoproterozoic metamorphic basement and the Devonian–Triassic sedimentary cover. North-vergent fold–thrust structures were formed at the end of the Early Cretaceous during the Chukchi (Late Kimmerian) deformation phase.     

俯冲增生杂岩带变形特征、成因机制及与后期变形的区别

俯冲增生杂岩带是造山带重要的组成单元,它记录了从俯冲到碰撞以及碰撞后陆内的演化历史,具有重要的研究价值。由于增生楔形成过程复杂,而后期的碰撞以及陆内变形又会强烈改造俯冲期的变形,因此如何区分增生杂岩中俯冲期间和碰撞阶段的变形就非常重要,但明确的区分两者又是非常困难的工作。我国几乎所有地区发育的俯冲-增生杂岩都经历了后期强烈的改造,因而正确合理地筛分俯冲阶段和碰撞阶段的变形,在我国的造山带研究中日益突出。本文在详细介绍俯冲期间相关变形及其机制的基础上,从不同构造要素的分布、发育特征、形成环境、成因机制等方面综合对比了俯冲阶段和碰撞阶段以及之后构造变形的异同,提出了区别不同阶段变形的主要原则。相比碰撞阶段变形,俯冲阶段的变形主要集中在俯冲隧道中,以简单剪切或一般剪切为主(逆冲断层多见),底板垫托以及双冲构造是变形的重要特征,变形呈弥散性,断层和面理以及褶皱等具有优势的构造极性,但缺少区域尺度的大型褶皱;纯剪变形少见,主要发育在俯冲隧道上方的增生楔中。流体作用以及水岩反应强烈,直接控制变形行为,发育有从显微尺度到区域尺度的变形分解现象。而碰撞阶段主要是在陆上环境进行,主要变形集中在接触带以及大型断裂/剪切带附近。断层和面理的构造极性不明显,增生楔整体变形,出现区域尺度的大型褶皱;流体作用虽有,但不如俯冲阶段明显和强烈,以逆冲和走滑断层多见。然而很多指标和依据并不是某种环境下唯一的,因此在实际工作中需要综合各方面信息和要素进行判断,合理区分不同阶段的变形。     

Deformation-enhanced metamorphic reactions and the rheology of high-pressure shear zones, Western Gneiss Region, Norway

Microstructural and petrological analysis of samples with increasing strain in high‐pressure (HP) shear zones from the Haram garnet corona gabbro give insights into the deformation mechanisms of minerals, rheological properties of the shear zone and the role of deformation in enhancing metamorphic reactions. Scanning electron microscopy with electron backscattering diffraction (SEM–EBSD), compositional mapping and petrographic analysis were used to evaluate the nature of deformation in both reactants and products associated with eclogitization. Plagioclase with a shape‐preferred orientation that occurs in the interior part of layers in the mylonitic sample deformed by intracrystalline glide on the (0 0 1)[1 0 0] slip system. In omphacite, crystallographic preferred orientations indicate slip on (1 0 0)[0 0 1] and (1 1 0)[0 0 1] during deformation. Fine‐grained garnet deformed by diffusion creep and grain‐boundary sliding. Ilmenite deformed by dislocation glide on the basal and, at higher strains, prism planes in the a direction. Relationships among the minerals present and petrological analysis indicate that deformation and metamorphism in the shear zones began at 500–650 °C and 0.5–1.4 GPa and continued during prograde metamorphism to ultra‐high‐pressure (UHP) conditions. Both products and reactants show evidence of syn‐ and post‐kinematic growth indicating that prograde reactions continued after strain was partitioned away. The restriction of post‐kinematic growth to narrow regions at the interface of garnet and plagioclase and preservation of earlier syn‐kinematic microstructures in older parts layers that were involved in reactions during deformation show that diffusion distances were significantly shortened when strain was partitioned away, demonstrating that deformation played an important role in enhancing metamorphic reactions. Two important consequences of deformation observed in these shear zones are: (i) the homogenization of chemical composition gradients occurred by mixing and grain‐boundary migration and (ii) composition changes in zoned metamorphic garnet by lengthening diffusion distances. The application of experimental flow laws to the main phases present in nearly monomineralic layers yield upper limits for stresses of 100–150 MPa and lower limits for strain rates of 10^?12 to 10^?13 s^?1 as deformation conditions for the shear zones in the Haram gabbro that were produced during subduction of the Baltica craton and resulted in the production of HP and UHP metamorphic rocks.     

青海省哇洪山断裂带中段构造变形特征及X光岩组分析

通过对哇洪山断裂带中段构造变形宏观及微观特征的研究,认为该断裂带经历了两种不同层次、不同性质的构造变形,早期以韧性变形为主,形成了沿断裂带广泛分布的NW-NNW向糜棱岩带;晚期以脆性变形为主,形成了广泛分布断层破碎带,并将早期的糜棱岩带错断。X光岩组分析结果表明,糜棱岩带构造岩内矿物排列定向性明显,其中石英变形以底面滑移或近底面滑移为主,兼有柱面滑移,为中低温-中温变形环境所形成;另外动态重结晶对变形岩石中石英优选方位的形成也可能发挥了重要作用。华里西晚期花岗闪长岩、印支期钾长花岗岩、花岗岩、二长花岗岩均没有明显的优选方位,因此韧性变形发生在该类岩石侵位之前。构造变形分析及同位素测年结果证实韧性剪切带形成于晚志留世,即加里东晚期。     

辽东鞍山齐大山韧性剪切带运动学解析及形成机制

关于太古宙早期地壳演化构造机制的争论已经持续了数十年,其焦点主要集中于水平构造还是垂向构造两大经典构造模式的探讨.对于早期地壳构造演化方面的研究,将会有助于我们更好地理解早前寒武纪的地球动力学机制.本文对华北克拉通东北部鞍山地区花岗-绿岩带内齐大山韧性剪切带的构造变形特征进行了详细的解析,揭示了该区新太古代垂向构造作用样式.研究结果表明,齐大山韧性剪切带内花岗质岩石长英质矿物塑性拉长特征明显,条带状构造发育,面理向NWW方向陡倾,不对称组构特征和矿物拉伸线理产状指示向NWW的陡倾正滑移剪切作用.变形岩石中的长英质矿物均发育中低温显微变形特征,石英C轴电子背散射衍射（EBSD）组构分析揭示石英以菱面＜a＞和底面＜a＞滑移系为主,岩石经历了中低温非共轴变形.根据矿物的变形行为以及石英的结晶优选方位推测变形温度约为400~500℃,岩石变形特征以位错蠕变为主.有限应变分析结果表明,靠近铁矿带方向,构造岩类型由L=S构造岩过渡为LS构造岩,岩石应变强度呈明显增强趋势.运动学涡度测量结果显示齐大山韧性剪切带内大多数岩石样品的W_k值大于0.75,岩石形成于以简单剪切作用为主的一般剪切作用.对比花岗-绿岩带西侧的白家坟韧性剪切带,显示二者均具有相向的陡倾正滑移运动学特征,表明新太古代时期鞍山地区地壳构造演化模式以垂向构造作用为主.      

Strain distribution within a km-scale,mid-crustal shear zone: The Kuckaus Mylonite Zone,Namibia

The subvertical Kuckaus Mylonite Zone (KMZ) is a km-wide, crustal-scale, Proterozoic, dextral strike-slip shear zone in the Aus granulite terrain, SW Namibia. The KMZ was active under retrograde, amphibolite to greenschist facies conditions, and deformed felsic (and minor mafic) gneisses which had previously experienced granulite facies metamorphism during the Namaqua Orogeny. Lenses of pre- to syn-tectonic leucogranite bodies are also deformed in the shear zone. Pre-KMZ deformation (D₁) is preserved as moderately dipping gneissic foliations and tightly folded migmatitic layering. Shear strain within the KMZ is heterogeneous, and the shear zone comprises anastomosing high strain ultramylonite zones wrapping around less deformed to nearly undeformed lozenges. Strain is localized along the edge of leucogranites and between gneissic lozenges preserving D₁ migmatitic foliations. Strain localization appears controlled by pre-existing foliations, grain size, and compositional anisotropy between leucogranite and granulite. The local presence of retrograde minerals indicate that fluid infiltration occurred in places, but most ultramylonite in the KMZ is free of retrograde minerals. In particular, rock composition and D₁ fabric heterogeneity are highlighted as major contributors to the strain distribution in time and space, with deformation localization along planes of rheological contrast and along pre-existing foliations. Therefore, the spatial distribution of strain in crustal-scale ductile shear zones may be highly dependent on lithology and the orientation of pre-existing fabric elements. In addition, foliation development and grain size reduction in high strain zones further localizes strain during progressive shear, maintaining the anastomosing shear zone network established by the pre-existing heterogeneity.     

The Migif–Hafafit gneissic complex of the Egyptian Eastern Desert: fold interference patterns involving multiply deformed sheath folds

The Wadi Hafafit Complex (WHC) is an arcuate belt of orthogneisses, migmatites and other high-grade metamorphic rocks, which marks the boundary between the Central Eastern and the South Eastern Deserts of Egypt. In the WHC, gneissic meta-gabbro outlines macroscopic fold interference patterns characterized by elliptical to irregular culminations cored by gneissic meta-tonalite to meta-trondhjemite. The five main culminations of the WHC have previously been labeled A (most northerly), B, C, D and E (most southerly). A detailed structural investigation of B, C, D and E reveals that these structures are a result of the interference of four macroscopic fold phases, the first three of which may represent a single deformation event. The first folding involved sheath-like fold nappes, which were transported to the N or NW, assisted by translation on gently dipping mylonite zones. The regional gneissosity and mineral extension lineations formed during this folding event. The fold nappes were deformed by mainly open upright small macroscopic and mesocopic folds with approximately NE-trending hinges. As a probable continuation of the latter folding, the sheaths were buckled into large macroscopic folds and monoclines with the same NE-trends. The fourth macroscopic folding resulted from shortening along the NE–SW direction, producing mainly NW–SE-trending upright gently plunging folds. Gravitative uplift is disputed as a component of the deformation history of the WHC. The peculiarities of the fold interference pattern result from the interesting behaviour of sheath folds during their refolding.     

The Kathikas mélange, SW Cyprus: late Cretaceous submarine debris flows

The Maastrichtian Kathikas mélange is shown to be of sedimentary origin, being a succession of undeformed, submarine, matrix-supported debris-flow deposits up to 270 m thick. Internal sedimentological features include beds emphasized by colour or clast size variation, pelagic chalk interbeds, planar clast fabrics and channels. A trend of upwards-thinning beds in the mélange is interpreted as due to debris-flow initiation on gradually increasing slopes. Debris was shed locally from the deformed and fragmented Mamonia Complex, a series of disrupted gravity-slide sheets of Mesozoic sedimentary rocks and deformed igneous rocks. All Mamonia lithologies are represented in the mélange, and local facies variations permit identification of individual sources. The mélange probably pre-dates emplacement of serpentinite into the Mamonia Complex. There was also local inter-mixing of material from the adjacent and underlying Troodos sequences. The mélange rests unconformably on both Mamonia and Troodos sequences, and formed after the main deformation episode of the Mamonia Complex. The degree of resedimentation increases gradually away from the disrupted Mamonia source rocks. The thickness and volume of the Kathikas mélange are comparable with those of recent submarine debris flow deposits on unstable or seismically active continental margins.