Proglacial Lake-ice Conveyors: A New Mechanism for Deposition of Drift in Polar Environments

Interpretation of sediments in the floors of valleys opening into western McMurdo Sound has been so problematic that it has hindered understanding of the late Quaternary history of the Antarctic Ice Sheet. Lateral moraines and enclosed drift sheets so clearly exposed on the headlands are generally absent within the valleys themselves. Instead, valley-floor sediments and landforms consist of hummocky, stratified fine sediment generally capped by coarser, poorly sorted material, small cross-valley and longitudinal ridges, and lateral ridges that superficially resemble shorelines. One clue as to the origin of these deposits is that at least some of the valleys were occupied by large proglacial lakes during the last glacial maximum (e.g. Glacial Lakes Trowbridge and Washburn in Miers and Taylor Valleys, respectively). This paper describes a new mechanism observed in a modern perennially ice-covered proglacial lake that documents the movement of glacial debris beyond the grounding line across the surface of the lake. This mechanism accounts for the absence of moraines and other ice-contact features on the valley floors, as well as for the presence of the other deposits and landforms mentioned above.     

Landslides and relict ice margin landforms in Adventdalen, central Spitsbergen, Svalbard

Two characteristic landforms, landslide blocks and drainage channels, were investigated in Adventdalen, central Spitsbergen. The landslides in the middle reaches of Adventdalen comprise large-scale bedrock slumps which form a hummocky surface on the south slope of Arctowskifjellet. The fourteen recognized landslide blocks are divided into upper and lower sections, according to altitude. The drainage channels consist of tributary rivers to Adventelva which flow in two distinct directions, either parallel with or oblique to the direction of the main river. Glacial deposits were found to cover the ridges between these tributary channels. The upper and lower landslide divisions may indicate former positions of the ice surface, and the channels appear to have originated during the existence of lateral moraine ridges with high ice content. These geomorphological findings have allowed reconstruction of former ice marginal positions, and they strongly suggest the existence of stagnant ice or minor re-advance phases during the course of deglaciation in Adventdalen.     

Holocene glacial advances and moraine formation at Albrechtbreen, Edgeøya, Svalbard

Terrace remnants close to the marine limit as well as two separate moraine ridges are observed in front of the glacier Albrechtbreen. The stacking of marine sediments from an original elevation of ca. 60–80 m a.s.l. into the Little Ice Age Moraine gives evidence for a considerably smaller glacier following the early Holocene deglaciation compared to that of the present. The outer moraine is composed of glacial diamicton. Radiocarbon datings of whale ribs, shell fragments and a log taken from sediment in front of Albrechtbreen indicate that the initial deglaciation occurred before 9, 400 B.P. and that the outer moraine was formed during a younger Holocene glacial advance. Lithological differences between the two moraine ridges suggest that the first ice advance occurred during a period with limited permafrost, whereas permafrost was more extensive during the Little Ice Age.     

The Origin and Significance of Debris-charged Ridges at the Surface of Storglaciären, Northern Sweden

Storglaciären is a 3.2 km long polythermal valley glacier in northern Sweden. Since 1994 a number of small (1–2 m high) transverse debris‐charged ridges have emerged at the ice surface in the terminal zone of the glacier. This paper presents the results of a combined structural glaciological, isotopic, sedimentological and ground‐penetrating radar (GPR) study of the terminal area of the glacier with the aim of understanding the evolution of these debris‐charged ridges, features which are typical of many polythermal glaciers. The ridges originate from steeply dipping (50–70°) curvilinear fractures on the glacier surface. Here, the fractures contain bands of sediment‐rich ice between 0.2 and 0.4 m thick composed of sandy gravel and diamicton, interpreted as glaciofluvial and basal glacial material, respectively. Structural mapping of the glacier from aerial photography demonstrates that the curvilinear fractures cannot be traced up‐glacier into pre‐existing structures visible at the glacier surface such as crevasses or crevasse traces. These curvilinear fractures are therefore interpreted as new features formed near the glacier snout. Ice adjacent to these fractures shows complex folding, partly defined by variations in ice facies, and partly by disseminated sediment. The isotopic composition (δ¹⁸O) of both coarse‐clear and coarse‐bubbly glacier ice facies is similar to the isotopic composition of the interstitial ice in debris layers that forms the debris‐charged ridges, implying that none of these facies have undergone any significant isotopic fractionation by the incomplete freezing of available water. The GPR survey shows strong internal reflections within the ice beneath the debris‐charged ridges, interpreted as debris layers within the glacier. Overall, the morphology and distribution of the fractures indicate an origin by compressional glaciotectonics near the snout, either at the thermal boundary, where active temperate glacier ice is being thrust over cold stagnant ice near the snout, or as a result of large‐scale recumbent folding in the glacier. Further work is required to elucidate the precise role of each of these mechanisms in elevating the basal glacial and glaciofluvial material to the ice surface.     

Integrated acoustic and coring investigation of glacigenic deposits in Spitsbergen fjords

In many areas of Svalbard, the Neoglacial terminal deposits represent the Holocene glacial maximum. The glaciers began the retreat from their Neoglacial maximum positions around 1900 AD. Based on high resolution acoustic data and sediment cores, sedimentation patterns in four tidewater glacier-influenced inlets of the fjord Isfjorden (Tempelfjorden, Billefjorden, Yoldiabukta and Borebukta), Spitsbergen, were investigated. A model for sedimentation of tidewater glaciers in these High Arctic environments is proposed. Glacigenic deposits occur in proximal and distal basins. The proximal basins comprise morainal ridges and hummocky moraines, bounded by terminal moraines marking the maximum Neoglacial ice extent. The distal basins are characterized by debris lobes and draping stratified glacimarine sediments beyond, and to some extent beneath and above, the lobes. The debris lobe in Tempelfjorden is composed of massive clayey silt with scattered clasts. Distal glacimarine sediments comprise stratified clayey silt with low ice-rafted debris (IRD) content. The average sedimentation rate for the glacimarine sediments in Tempelfjorden is 17 mm/yr for the last ca. 130 years. It is suggested that the stratified sediments in Tempelfjorden are glacimarine varves. The high sedimentation rate and low IRD content are explained by input from rivers, in addition to sedimentation from suspension of glacial meltwater. The debris lobes in Borebukta are composed of massive clayey silt with high clast content. Distal glacimarine sediments in Yoldiabukta comprise clayey silt with high IRD content. The average sedimentation rate for these sediments is 0.6 mm/yr for the last 2300 years.     

The Grayling Fingers region of Michigan: soils, sedimentology, stratigraphy and geomorphic development

This paper provides data on the landforms, soils, and sediments within a unique northern Michigan landscape known as the Grayling Fingers, and evaluates these data to develop various scenarios for the geomorphic development of this region. Composed of several large, flat-topped ridges that trend N–S, the physiography of the “Fingers” resembles a hand. Previously interpreted as “remnant moraines”, the Grayling Fingers are actually a Pleistocene constructional landscape that was later deeply incised by glacial meltwater. The sediments that comprise the Fingers form a generally planar assemblage, with thick (>100 m), sandy glacial outwash forming the lowest unit. Above the outwash are several meters of till that is remarkably similar in texture to the outwash below; thus, the region is best described as an incised ground moraine. Finally, a thin silty “cap” is preserved on the flattest, most stable uplands. This sediment package and the physiography of the Fingers are suggestive of geomorphic processes not previously envisioned for Michigan.Although precise dates are lacking, we nonetheless present possible sequences of geomorphic/sedimentologic processes for the Fingers. This area was probably a topographic high prior to the advance of marine isotope stage 2 (Woodfordian) ice. Much of the glacial outwash in the Fingers is probably associated with a stagnant, early Woodfordian ice margin, implying that this interlobate area remained ice-free and ice-marginal for long periods during stage 2. Woodfordian ice eventually covered the region and deposited 5–10 m of sandy basal till over the proglacial outwash plain. Small stream valleys on the outwash surface were palimpsested onto the till surface as the ice retreated, as kettle chains and as dry, upland valleys. The larger of these valleys were so deeply incised by meltwater that they formed the large, through-flowing Finger valleys. The silt cap that occupies stable uplands was probably imported into the region, while still glaciated. The Fingers region, a col on the ice surface, could have acted as a collection basin for silts brought in as loess or in superglacial meltwater. This sediment was let down as the ice melted and preserved only on certain geomorphically stable and fluvially isolated locations. This study demonstrates that the impact of Woodfordian ice in this region was mostly erosional, and suggests that Mississippi Valley loess may have indirectly impacted this region.     

Snow-avalanche impact landforms, deposits and effects at Urdvatnet, southern Norway: implications for avalanche style and process

An unusual assemblage of landforms and deposits is described from upper Norangsdalen, Sunnmøre region, southern Norway, and interpreted as the product of snow‐avalanche events that vary in magnitude, frequency and debris content. An avalanche impact plunge pool, proximal scar and distal mound are associated with a coarse gravel deposit covering part of the valley floor. Landforms in this debris spread include gravel ridges, boulder lines, beaded ridges, fine sediment banked against and covering large boulders, and gravel clumps. Many of these landforms are aligned, indicating across‐valley transport radiating from the plunge pool. Features were mapped in the field and samples analysed for grain size and heavy‐mineral content. The debris spread is attributed to deposition by high‐energy, debris‐rich snow‐avalanche events that collect debris from large areas of the valley side, lower slopes and plunge pool. Aligned landforms develop through sediment transport in a basal shear zone, and randomly distributed gravel clumps represent melt pits following debris transport in the avalanche body. Air displacement ahead of larger avalanches is thought to have felled and tilted trees on the lower slopes of the distal valley side. Approximate ages of damaged trees allowed estimation of the frequency of snow‐avalanche events: (1) small, frequent events (several per annum) carry debris to the lower valley slopes and the plunge pool; (2) moderate events with an annual to decadal frequency maintain the pool–scar–mound complex; and (3) large, debris‐rich events with a decadal to centennial frequency add material to the debris spread.     

Sediment Distribution Around Glacially Abraded Bedrock Landforms (Whalebacks) at Lago Tranquilo, Chile

Whalebacks are convex landforms created by the smoothing of bedrock by glacial processes. Their formation is attributed to glacial abrasion either by bodies of subglacial sediment sliding over bedrock or by individual clasts contained within ice. This paper reports field measurements of sediment depth around two whaleback landforms in order to investigate the relationship between glacigenic deposits and whaleback formation. The study site, at Lago Tranquilo in Chilean Patagonia, is situated within the Last Glacial Maximum (LGM) ice limits. The two whalebacks are separated by intervening depressions in which sediment depths are generally 0.2 to 0.3 m. Two facies occur on and around the whalebacks. These facies are: (1) angular gravel found only on the surface of the whalebacks, interpreted as bedrock fracturing in response to unloading of the rock following pressure release after ice recession, and (2) sandy boulder‐gravel in the sediment‐filled depressions between the two whalebacks, interpreted as an ice‐marginal deposit, with a mixture of sediment types including basal glacial and glaciofluvial sediment. Since the whalebacks have heavily abraded and striated surfaces but are surrounded by only a patchy and discontinuous layer of sediment, the implication is that surface abrasion of the whalebacks was achieved primarily by clasts entrained in basal ice, not by subglacial till sliding.     

Reconstruction of glacial Lake Hind in southwestern Manitoba, Canada

Glacial Lake Hind was a 4000 km² ice-marginal lake which formed in southwestern Manitoba during the last deglaciation. It received meltwater from western Manitoba, Saskatchewan, and North Dakota via at least 10 channels, and discharged into glacial Lake Agassiz through the Pembina Spillway. During the early stage of deglaciation in southwestern Manitoba, part of the glacial Lake Hind basin was occupied by glacial Lake Souris which extended into the area from North Dakota. Sediments in the Lake Hind basin consist of deltaic gravels, lacustrine sand, and clayey silt. Much of the uppermost lacustrine sand in the central part of the basin has been reworked into aeolian dunes. No beaches have been recognized in the basin. Around the margins, clayey silt occurs up to a modern elevation of 457 m, and fluvio-deltaic gravels occur at 434–462 m. There are a total of 12 deltas, which can be divided into 3 groups based on elevation of their surfaces: (1) above 450 m along the eastern edge of the basin and in the narrow southern end; (2) between 450 and 442 m at the western edge of the basin; and (3) below 442 m. The earliest stage of glacial Lake Hind began shortly after 12 ka, as a small lake formed between the Souris and Red River lobes in southwestern Manitoba. Two deltas at an elevation of 450 were formed in this lake. At the same time, the Souris Lobe retreated far enough to allow glacial Lake Souris to expand farther north along the western side of the basin from North Dakota into what was to become glacial Lake Hind. Three deltas were built at an elevation above 460 m in the Canadian part of this proglacial lake. Continued ice retreat allowed the merger of glacial Lake Souris with the interlobate glacial Lake Hind to the east. Subsequent erosion of the outlet to the Pembina Spillway allowed waters in the glacial Lake Hind basin to become isolated from glacial Lake Souris, and a new level of glacial Lake Hind was established at 442 m, with 5 deltas built at this level by meltwater runoff from the west. Next, a catastrophic flood from the Moose Mountain uplands in southeastern Saskatchewan flowed through the Souris River valley to glacial Lake Souris, spilling into Lake Hind and depositing another delta. This resulted in further incision of the outlet (Pembina Spillway). A second flood through the Souris Spillway from glacial Lake Regina further eroded the outlet; most of glacial Lake Hind was drained at this time except for the deeper northern part. Coarse gravel was deposited by this flood, which differs from previous flood gravel because it is massive and contains less shale.     

CHANGES IN ICE-MARGIN PROCESSES AND SEDIMENT ROUTING DURING ICE-SHEET ADVANCE ACROSS A MARGINAL MORAINE

Advance of part of the margin of the Greenland ice sheet across a proglacial moraine ridge between 1968 and 2002 caused progressive changes in moraine morphology, basal ice formation, debris release, ice‐marginal sediment storage, and sediment transfer to the distal proglacial zone. When the ice margin is behind the moraine, most of the sediment released from the glacier is stored close to the ice margin. As the margin advances across the moraine the potential for ice‐proximal sediment storage decreases and distal sediment flux is augmented by reactivation of moraine sediment. For six stages of advance associated with distinctive glacial and sedimentary processes we describe the ice margin, the debris‐rich basal ice, debris release from the glacier, sediment routing into the proglacial zone, and geomorphic processes on the moraine. The overtopping of a moraine ridge is a significant glaciological, geomorphological and sedimentological threshold in glacier advance, likely to cause a distinctive pulse in distal sediment accumulation rates that should be taken into account when glacial sediments are interpreted to reconstruct glacier fluctuations.     

Geomorphology of the Sub-Antarctic Australian Territory of Heard Island-McDonald Island

The geomorphology of Heard Island-McDonald Island is primarily the product of close interplay between volcanism, glaciation, and vigorous marine processes in a stormy sub-Antarctic environment. The dominant landform is the strato-volcano Big Ben (2745m), which is the highest mountain on Australian territory outside Antarctica. Other volcanic landforms include scoria cones, domes, open vertical volcanic conduits, lava flows and lava tubes. Volcanic activity is ongoing from the summit of Big Ben, and from Samarang Hill on McDonald Island. Early, but unproven, glacial sediments may exist within the Late Miocene - Early Pliocene Drygalski Formation, which forms a 300m high plateau along the northern coast of Heard Island. Growth of the present glaciers, some of which reach sea level, has been a response to progressive growth of the volcanoes. A variety of erosional and depositional glacial landforms is present, including major lateral moraines and extensive hummocky moraines. Vigorous longshore drift and an abundant sediment supply have produced a large spit at the downdrift end of the island, and formed bars from reworked glacigenic sediment that now impound proglacial estuarine lagoons, some of which have grown rapidly over recent decades as tidewater glaciers have retreated. Integrated study of the volcanic, glacial and coastal sequences offers the possibility of constructing a well-dated record of climate change. Research into the geomorphology, surficial sediments, and contemporary geomorphological processes, including glaciofluvial sediment flux, is also important as an aid to environmental management on land, and to management of the adjacent marine environment.     

天山独库公路冰川泥石流堆积与冰碛石组构特征

通过对独库公路三岔河道班沟等处泥石流扇形地上不同形态的泥石流堆积、冰川堆积和岩屑坡的沉积砾石组构对比研究,发现在不同沉积相中,砾石ab面的组构特点互不相同,都随其不同的沉积动力和地形等沉积条件的差别而有别,所以利用砾石组构这一研究方法,不但可划分不同的沉积相,而且在第四纪地质与沉积学研究中具有重要的意义。     

Nature and origin of corrugated ground moraine of the Des Moines lobe,Story County,Iowa

Corrugated ground moraine in Story County, Iowa consists of low relief (1–2 m) ridges which most commonly consist of late Wisconsinan till. The average spacing between ridges is about 105 m, and they generally parallel the configuration of the Bemis Moraine, the terminal moraine of the Des Moines glacial lobe. Till fabric (pebble orientations and anisotropy of magnetic susceptibility), facies variations and landform fabric analyzed at three sites in typical corrugated ground moraine landscape near Ames in Story County, Iowa indicate that at sites 1 and 2 the ridges consist of till probably deposited by lodgement. At site 3, two ridges consist of till and massive to cross-bedded sand. Till at site 3 is also probably lodgement till. The nature of the till and related glaciofluvial sediments at each site suggests that the corrugation ridges formed in basal cracks or crevasses in the Des Moines Lobe. The cracks are postulated to have formed during extending flow of the Des Moines lobe as it advanced toward its terminal position. Retreat of the Des Moines lobe was rapid enough to preclude significant accumulations of supraglacial sediment upon corrugated ground moraine.     

Catastrophic middle Pleistocene jökulhlaups in the upper Susquehanna River: Distinctive landforms from breakout floods in the central Appalachians

Widespread till and moraines record excursions of middle-Pleistocene ice that flowed up-slope into several watersheds of the Valley and Ridge Province along the West Branch of the Susquehanna River. A unique landform assemblage was created by ice-damming and jökulhlaups emanating from high gradient mountain watersheds. This combination of topography formed by multiple eastward-plunging anticlinal ridges, and the upvalley advance of glaciers resulted in an ideal geomorphic condition for the formation of temporary ice-dammed lakes. Extensive low gradient (1°–2° slope) gravel surfaces dominate the mountain front geomorphology in this region and defy simple explanation. The geomorphic circumstances that occurred in tributaries to the West Branch Susquehanna River during middle Pleistocene glaciation are extremely rare and may be unique in the world. Failure of ice dams released sediment-rich water from lakes, entraining cobbles and boulders, and depositing them in elongated debris fans extending up to 9 km downstream from their mountain-front breakout points. Poorly developed imbrication is rare, but occasionally present in matrix-supported sediments resembling debris flow deposits. Clast weathering and soils are consistent with a middle Pleistocene age for the most recent flows, circa the 880-ka paleomagnetic date for glacial lake sediments north of the region on the West Branch Susquehanna River. Post-glacial stream incision has focused along the margins of fan surfaces, resulting in topographic inversion, leaving bouldery jökulhlaup surfaces up to 15 m above Holocene channels. Because of their coarse nature and high water tables, jökulhlaup surfaces are generally forested in contrast to agricultural land use in the valleys and, thus, are readily apparent from orbital imagery.     

The geomorphic impact of glaciers as indicated by tors in North Sweden (Aurivaara, 68° N)

Geomorphological investigations carried out on 15 tor-like features located on the Aurivaara plateau (North Sweden, 68° N) provide new insights in the greatly debated age of these landforms. Erratics and till trapped deep in the tor joints support a pre-Weichselian age for tor formation. Moreover, the occurrence of various weathering stages in allochtonous material, the joint width up to 1.5 m (requiring long-term weathering), and the frequent association of tors with pediment-like forms, suggest pre-Quaternary tor formation. The juxtaposition of fresh erratics and in situ old weathering features (mushroom rocks, concentrically weathered well-rounded corestones, and grus) indicates a predominantly cold-based regime for the Scandinavian ice sheet, with erratics carried by the overlying moving ice being repeatedly deposited on tor summits during deglaciation phases. The relationships between tors and ice action indicated for the Aurivaara plateau result in the proposal of a morphodynamical succession of five tor subtypes ranging from the preservation of well-rounded corestones still embedded in grus (suggesting negligible glacial erosion) to the almost complete removal of tor features by ice scouring. A comparison with tors in similar geological and topographical contexts from the unglaciated Dartmoor area allows a tentative evaluation of an average overall glacial erosion of 0–10 m on the northern Sweden plateaus, in sharp contrast with the 190 m overdeepening of the nearby Torneträsk basin. Thus, this case study of Swedish tors provides additional support to the recent interpretations of relict landscapes in previously glaciated areas and is in accordance with the classical «model» of glacial selective erosion established in the Nordic and Arctic mountains.     

Proglacial Sediment—Landform Associations of a Polythermal Glacier: Storglaciären, Northern Sweden

Mapping and laboratory analysis of the sediment—landform associations in the proglacial area of polythermal Storglaciären, Tarfala, northern Sweden, reveal six distinct lithofacies. Sandy gravel, silty gravel, massive sand and silty sand are interpreted as glaciofluvial in origin. A variable, pervasively deformed to massive clast‐rich sandy diamicton is interpreted as the product of an actively deforming subglacial till layer. Massive block gravels, comprising two distinctive moraine ridges, reflect supraglacial sedimentation and ice‐marginal and subglacial reworking of heterogeneous proglacial sediments during the Little Ice Age and an earlier more extensive advance. Visual estimation of the relative abundance of these lithofacies suggests that the sandy gravel lithofacies is of the most volumetric importance, followed by the diamicton and block gravels. Sedimentological analysis suggests that the role of a deforming basal till layer has been the dominant factor controlling glacier flow throughout the Little Ice Age, punctuated by shorter (warmer and wetter climatic) periods where high water pressures may have played a more important role. These results contribute to the database that facilitates discrimination of past glacier thermal regimes and dynamics in areas that are no longer glacierized, as well as older glaciations in the geological record.     

Thermokarst landforms and processes in Ares Vallis, Mars

With a length of 1500 km, Ares Vallis is one of the largest martian outflow channels, and is inferred to have been formed by cataclysmic floods of water conveyed from source areas, which are marked by chaotic terrain, to Chryse Planitia. Near its downstream outlet (14°N, 28°W), the floor of Ares widens to 100 km from its average 25 km width. This area of widened channel floor is marked by a complex of irregular terraces, elongated depressions, linear ridges, sinuous ridges, and other indicators of highly irregular dissection of a formerly continuous surface. Thermokarst processes, following either glacial or alluvial histories, seem best to explain these relationships. Various indicators of fluctuating discharge for water and sediment, ponding of debris, and prolonged flow suggest the emplacement of ice-rich debris in the anomalous reach of Ares Vallis. Post-flood or post-glacial thawing of the ice-rich sediments would then generate the thermokarst landscape. These processes, which are consistent with other indicators of anomalously warm climatic conditions, imply a profound change from the modern martian environment.     

A 450-ka long record of glaciation in Northern Mongolia based on studies at Lake Khubsugul: high-resolution reflection seismic data and grain-size variations in cored sediments

We use high-resolution reflection seismic data and detailed grain-size analysis of a drill core (KDP-01) from Lake Khubsugul (northern Mongolia) to provide an improved reconstruction of the glacial history of the area for the last 450 ka. Grain-size analysis of suspended sediment load in modern rivers draining into the lake and of moraine material from the northern part of the catchment shows that the silt fraction is transported to the central part of the lake mainly by river suspension, whereas the clay fraction is mainly transported by glacial meltwater during deglaciation. The changes in of the clay/silt ratio in Lake Khubsugul sediments correlates well with the standard global paleoclimate records: low clay/silt ratios indicate warm climates, while a high clay/silt ratio reflects glacial erosion and cold climates. Pulses of clay input into the lake occur at the final stages of glacial periods (i.e., glacial maxima and subsequent onsets of deglaciation). The periodicity in glacial clay input in Lake Khubsugul is in tune with global periods of deglaciation, but there are differences in the intensity of the deglacial events for MIS-12 and MIS-2. These differences are attributed to specific conditions in regional distribution of moisture during glaciation, glacial ice volumes, and solar insolation intensity at the onset of deglaciation. Deglaciation of the Khubsugul glaciers occurred in response to an increase in summer solar insolation above a threshold value of 490 W/m². Two types of deglaciation can be distinguished: (1) slow melting during several tens of 1,000 years during weak increases in summer insolation, and (2) short and fast melting during several thousands of years in response to strong increases in summer insolation. The maximum ice volume in the area of Lake Khubsugul during the past 450 ka occurred during the period of 373–350 ka BP (MIS 11a-10) and was caused by high levels of moisture in the region, whereas the MIS-2 and MIS-12 glacial periods were characterized by minima in ice volume, due to the strong aridity in the region.     

Deglacial meltwater drainage and glaciodynamics: inferences from Laurentide eskers, Canada

This paper evaluates current knowledge of Laurentide eskers in Canada in the light of developments in glacier hydrology and glacial sedimentology. Questions regarding the morpho-sedimentary relations of eskers, the synchroneity and operation of R-channel systems, the role of supraglacial meltwater input and proglacial water bodies, the controls on esker pattern, and the glaciodynamic condition of the ice sheet at the time of esker formation are discussed. A morphologic classification of eskers is proposed. Five types of eskers are identified and investigated. Type I eskers likely formed in extensive, synchronous, dendritic R-channel networks under regionally stagnant ice that terminated in standing water. Type II eskers likely formed in short, subaqueously terminating R-channels or reentrants close to an ice front or grounding line that may have actively retreated during esker sedimentation. Type III eskers plausibly formed in short R-channels that drained either to interior lakes in, or tunnel channels under, regionally stagnant ice. Type IV eskers may have formed as time-transgressive segments in short, subaerially terminating R-channels (or reentrants) that developed close to the ice margin as the ice front underwent stagnation-zone retreat or downwasted and backwasted regionally (stagnant ice); however, formation in synchronous R-channels cannot be discounted on the basis of reported observations. Type V eskers may have formed in H-channels that terminated subaerially. The spatial distribution of these esker types is discussed. The factors that determined Laurentide R-channel pattern and operation were likely a complex combination of (i) supraglacial meltwater discharge, (ii) the number and location of sink holes, (iii) the ice surface slope, thickness and velocity, and (iv) the permeability, topography and rigidity of the bed. These factors cause and respond to changes in ice dynamics and thermal regime over the glacial cycle.     

Supraglacial Debris Supply in the Cuerpo de Hombre paleoglacier (Spanish Central System): Reconstruction and Interpretation of a Rock Avalanche Event

During the deglaciation stages of the last glacial period a rock avalanche took place on the glacier that occupied the upper sector of the Cuerpo de Hombre Valley (Sierra de Béjar). The material displaced during the avalanche fell onto the ice, was transported by the glacier and later deposited as supraglacial ablation till. The cause of the avalanche was the decompression of the valley slopes after they were freed from the glacier ice (stress relaxation). Reconstruction of the ice masses has been carried out to quantify the stress relaxation that produced the collapse. The rock avalanche took place on a lithologically homogeneous slope with a dense fracture network. The avalanche left a 0.4 ha scar on the slope with a volume of displaced material of 623 ± 15 × 10³ m³. The deposit is an accumulation of large, angular, heterometric boulders (1–100 m³ in volume) with a coarse pebble‐size matrix. The avalanche can be explained as a relaxation process. This implies rock decompression once the glacier retreat left the wall ice free (debuttressing). Calculations show that the avalanche took place where the decompression stresses were highest (130–170 kPa). In the Spanish Central System paleoglaciers the largest accumulation of morainic deposits occurred after the glacial maximum and the earliest stages of the ice retreat. The process described here is used as an example to formulate a hypothesis that the largest accumulations of tills were formed in relation to enhanced slope dynamics once some glacier retreat had occurred.