基于聚焦合成的显微三维成像系统

本文利用显微镜物镜焦深范围有限,显微三维样本成像时需要一序列图像才能聚焦清晰特点,研究开发利用图像处理技术扩展显微成像焦深范围,应用改进Laplacian聚焦算子实现序列图像的融合显示,同时,提出了一种基于区域小波变换的序列显微图像融合算法并加以实现.用高斯插值算法得到三维显微图像的高度图,设计了一种网格轮廓线算法对高度索引图进行了三维重建显示和测量,并利用立体视觉原理生成了三维物体的左右视图和立体视图.应用此方法可以完成显微目标的表面三维参数的测量分析.     

Disector自动测量及其三维可视化系统

本文介绍了自行开发的解决Diseetor应用问题的计算机图像处理软件系统及关键技术、算法。本系统能依照Disector原理对多层组织细胞的电镜及光镜图像中的目标进行正确的分割,各层之间图像的人工交互及自动配准。针对每个目标的上下层关系实现目标的Disector自动计数及参数计算,并对每个目标进行体数据的提取和三维重建显示,通过切片级表面重建出曲面表面,再借助OpenGL的显示功能把曲面显示出来。使用Disector分析系统对多种粒子(细胞等)进行三维分析,可以简化寻找新出现粒子的过程,克服切片采集过程中的形变,在统计分析之后,立体地观察粒子结构,能够使操作者从繁琐的手工操作中解脱出来。自动统计新出现的粒子。文中同时还给出了用该系统对小白鼠神经细胞个数的Disector分析,肾小球个数统计分析和三维重建显示实例。     

颅颌面外科与三维重建技术

目的 探讨电子束ＣＴ三维重建技术在颅颌面外科的适应症和应用价值。方法 采用美国Ｉｍａｔｒｏｎ公司的电子束ＣＴ（ｅｌｅｃｔｒｏｎ ｂｅａｍ ＣＴ,以下简称ＥＢＣＴ）Ｃ－１５０,对７６例严重颅颌面病人实行薄层ＣＴ容积扫描。将所获ＣＴ 象经数字接口传至加拿大ＩＳＧ公司生产的Ａｌｌｅｇｒｏ工作站进行三维重建。结果 ＥＢＣＴ成像技术能立体的、详尽和精确的显示机体组织三维解剖结构极其相互关系。其再现畸形或病体     

三维重建在孤立性肺结节血管集束征的诊断价值

目的:探讨三维重建图像对孤立性肺结节（SPN）血管集束征的显示及其诊断价值。资料与方法:回顾性分析经病理确诊的63例SPN,在三维重建工作站进行多平面重组（MPR）及容积再现（VR）,观察血管集束征的显示,统计分析两种方法的差异以及在良恶性SPN鉴别诊断中的应用价值。结果:SPN的血管集束征在VR图像显示率高于MPR（P<0.05）,在MPR和VR图像上,恶性SPN血管集束征的显示率均高于良性（P<0.05）。结论:三维重建图像能够更全面地显示血管集束征,对SPN的良恶性分析有一定的参考价值。      

活体肺部组织的三维重建及其临床意义

活体肺部组织的三维重建对医学解剖和临床有重要的意义。本文针对活体肺器官三维重建存在的困难，在图象预处理和重建方法上，采用了一系列新颖的技术，首次得到了能进行剖割，旋转，透明和彩色明暗化的肺部及其内部管道的三维显示。临床评价说明，重建结果是有意义的．     

多层螺旋CT后处理技术对气管支气管异物的诊断价值

目的:评价多层螺旋CT三维重建及仿真内窥镜技术对气管支气管异物的诊断价值。方法:对20例支气管异物、1例气管异物、1例先天性气管性支气管发育异常、1例气管良性肿瘤患儿行多层螺旋CT检查并进行三维重建及仿真内窥镜技术显示气管支气管病变;三维重建技术包括多平面重建、最大密度投影、最小密度投影、表面遮盖显示和容积再现,CT仿真内窥镜对气管支气管异物的显示与支气管镜所见具有一致性。结果:多层螺旋CT三维重建及仿真内窥镜可准确、直观地显示气管支气管异物的位置、大小、形态、密度及阻塞程度。结论:多层螺旋CT三维重建及仿真内窥镜可准确评价气管支气管异物,是一种准确无创性诊断方法,为临床治疗提供直观的影像学资料,具有较高的临床诊断及指导价值。     

螺旋CT三维重建技术及临床应用

目的：是探讨螺旋ＣＴ三维重建技术的临床应用价值。材料与方法：为１０５例三维重建检查人分为三组：血和性病变，骨骼病变和肺内结节，扫描技术和造影剂参数按受检部位范围和病变性质具体设计。三维重建采用最大强度投影或／和表面成像显示。结果；得到全部病例都能清晰显示病变在三维立体空间的实际大小，形态，位置及周围组织结构的立体解剖关系。     

从CT断面图象重建人体器官的三维形状

计算机层析成象技术(Computcrizcd Tomography)所得到的图象是二维的,不易理解三维器官的形状.因此,从CT断而图象重建人体器官的三维形状成为计算机图象处理领域的十分有意义的课题.我们对三维重建的全过程,包括CT图象的输入、分割、轮廓跟踪、多边形拟合、断而间插值及三维显示等步骤进行了研究,并提出一种断面间轮廓插值的快速有效的方法.     

泌尿系疾病三维CT重建技术研究

目的探讨泌尿系疾病患螺旋CT三维重建技术.方法回顾分析了54例成功进行了泌尿系螺旋CT三维重建的病例,其中46例使用了造影剂,扫描及重建分别在PQ6000CT机和工作站上进行,逐一分析各病例的扫描参数.扫描时间.三维重建类型.方法.技巧.结果扫描参数.造影剂量等随检查目的不同而有所不同,重建技巧通过训练可以掌握,SSD及VR技术能生动的显示肾的畸形.肿块和结石,最大密度投影法适合于CT尿路成像和肾动脉狭窄的显示.结论设计合理的扫描计划.匹配合适的参数.选择最佳扫描延迟时间,是获得泌尿系高质量三维重建图象的前提条件,熟练地掌握三维重建方法和技巧也是不可缺少的成功要素.     

SWI在早期脑出血及出血性脑梗死的应用价值

目的:探讨磁共振磁敏感加权成像(SWI)对超急性期脑出血和急性出血性脑梗死的诊断价值。方法:收集我院2010年2月～2011年11月超急性期脑出血患者25例,平均年龄58岁,发病时间均在6h以内;急性出血性脑梗死患者22例,平均年龄54岁,发病时间在24h以内。磁共振检查采用GESigna1.5THDMR系统,头颅8通道线圈。行常规T1WI、T2WI、FLAIR、DWI序列扫描,每个病例均加扫SWI序列。结果:25例脑出血病例中20例在T2WI上病灶周边可见到低信号环,显示率为80%。T1WI、T2FLAIR及DWI序列无特征表现提示出血。在SWI上均可见到低信号,显示率为100%,且显示的范围更大、更明显;22例出血性脑梗死病例中2例在T1WI内可见到轻微高信号,显示率约为9%。T2WI、T2FLAIR及DWI序列对出血性脑梗死没有特征性表现。SWI序列显示22例梗死区内均可见点片状不均匀低信号,显示率达到100%。结论:SWI序列较常规MRI序列对诊断早期脑卒中的类型和及早检测出脑梗死出血性转化有更大帮助,对临床治疗有重要指导意义。     

Parallel 3-D Simulation of a Fault Gouge Using the Lattice Solid Model

Despite the insight gained from 2-D particle models, and given that the dynamics of crustal faults occur in 3-D space, the question remains, how do the 3-D fault gouge dynamics differ from those in 2-D? Traditionally, 2-D modeling has been preferred over 3-D simulations because of the computational cost of solving 3-D problems. However, modern high performance computing architectures, combined with a parallel implementation of the Lattice Solid Model (LSM), provide the opportunity to explore 3-D fault micro-mechanics and to advance understanding of effective constitutive relations of fault gouge layers. In this paper, macroscopic friction values from 2-D and 3-D LSM simulations, performed on an SGI Altix 3700 super-cluster, are compared. Two rectangular elastic blocks of bonded particles, with a rough fault plane and separated by a region of randomly sized non-bonded gouge particles, are sheared in opposite directions by normally-loaded driving plates. The results demonstrate that the gouge particles in the 3-D models undergo significant out-of-plane motion during shear. The 3-D models also exhibit a higher mean macroscopic friction than the 2-D models for varying values of interparticle friction. 2-D LSM gouge models have previously been shown to exhibit accelerating energy release in simulated earthquake cycles, supporting the Critical Point hypothesis. The 3-D models are shown to also display accelerating energy release, and good fits of power law time-to-failure functions to the cumulative energy release are obtained.     

用可视化技术分析虚拟现实环境下三维地震数据场的研究

目的 用可视化方法分析三维地震数据，直接观察数据中隐藏的地质现象。方法：将第每个反射子波用一个粒子模型表示，来自同一反射面的子波粒子相互叠合成一个同相面。为加快显示速度，将一个三维地震数据体转换为三维二值图像，用有序扩展算法追踪同相面所在的三维连通域，细化后得到反射面的坐标数据。再在虚拟现实系统下的对反射面进行立体显示，直观地分析地下地层的结构。结果 实际数据试验得到了反射面的三维形态及断层的分布规律，立体显示更深刻地揭示了复杂地质现象及其规律。结论 只有在虚拟现实系统中进行三维地震数据的可视化，才能直观地看到地下地层的真实场景，真正实现三维数据的全三维解释，所提出的方法是有效。     

城市建筑物震害三维模拟在GIS中的应用

将地理信息系统(GIS)技术用于震害预测在国内外都有较为广泛和成熟的研究。大多数的研究都是基于二维GIS技术的应用,以图表的形式显示震害预测结果,不能够直观地显示建筑物空间特征。本文以砖混结构建筑为例,总结了不同震害等级的震害特征,将提取的震害特征和建筑物纹理合成,利用Google SketchUp三维建模和ArcGIS Engine开发实现震害三维显示。本文给出了利用三维模拟技术在震害预测研究中的一种方法和思路,旨在为震后应急救援、虚拟救援训练和地震科普教学等方面提供帮助。     

城市建筑物震害三维模拟在GIS中的应用

GIS technology has been applied to building damage analysis around the world. However, most previous studies focused on the application of 2-D GIS technology, and the results from traditional earthquake damage prediction are displayed in 2-D figures and charts, which is incapable of demonstrating the 3-D spatial characteristics of buildings. Taking brick-concrete building as an example, we study the characteristics of building damage, and effectively combine the information of building textures and earthquake damage. Then, we apply Google SketchUp techniques to create building models and display them with seismic damage texture in the ArcGIS Engine software development environment. In this paper we propose a solid idea for 3-D simulation of earthquake damage, which is helpful in earthquake damage prediction, virtual emergency rescue practice and earthquake knowledge education.     

基于VTK的医学图像系统研究

医学三维数据场可视化是当前科学计算可视化应用的重点。本文论述了可视化工具包VisualizationToolkit(VTK)的主要特点,介绍了三维医学可视化系统实现的原理和方法。根据一系列人体断面图像,应用VTK实现了三维医学图像重构,对重构后的三维图像进行解剖分析;并实现对人体的二维图像逐帧浏览及柱状统计。实验结果表明,VTK具有使用灵活,功能强大的优点,是医学三维数据场可视化的有力工具。     

Application of 3-D Crustal and Upper Mantle Velocity Model of North America for Location of Regional Seismic Events

—?Seismic event locations based on regional 1-D velocity-depth sections can have bias errors caused by travel-time variations within different tectonic provinces and due to ray-paths crossing boundaries between tectonic provinces with different crustal and upper mantle velocity structures. Seismic event locations based on 3-D velocity models have the potential to overcome these limitations. This paper summarizes preliminary results for calibration of IMS for North America using 3-D velocity model. A 3-D modeling software was used to compute Source-Station Specific Corrections (SSSCs(3-D)) for Pn travel times utilizing 3-D crustal and upper mantle velocity model for the region. This research was performed within the framework of the United States/Russian Federation Joint Program of Seismic Calibration of the International Monitoring System (IMS) in Northern Eurasia and North America.¶An initial 3-D velocity model for North America was derived by combining and interpolating 1-D velocity-depth sections for different tectonic units. In areas where no information on 1-D velocity-depth sections was available, tectonic regionalization was used to extrapolate or interpolate. A Moho depth map was integrated. This approach combines the information obtained from refraction profiles with information derived from local and regional network data. The initial 3-D velocity model was tested against maps of Pn travel-time residuals for eight calibration explosions; corrections to the 3-D model were made to fit the observed residuals. Our goal was to find a 3-D crustal and upper mantle velocity model capable predicting Pn travel times with an accuracy of 1.0–1.5 seconds (r.m.s.).¶The 3-D velocity model for North America that gave the best fit to the observed travel times, was used to produce maps of SSSCs(3-D) for seismic stations. The computed SSSCs(3-D) vary approximately from +5 seconds to ?5 seconds for the western USA and the Pre-Cambrian platform, respectively. These SSSCs(3-D) along with estimated modeling and measurement errors were used to relocate, using regional data, an independent set of large chemical explosions (with known locations and origin times) detonated within various tectonic provinces of North America. Utilization of the 3-D velocity model through application of the computed SSSCs(3-D) resulted in a substantial improvement in seismic event location accuracy and in a significant decrease of error ellipse area for all events analyzed in comparison both with locations based on the IASPEI91 travel times and locations based on 1-D regional velocity models.     

稀疏采样下陡角度构造的波动方程深度偏移成像

针对稀疏采样,特别是crossline方向稀疏采样的三维地震数据,提出了一个基于波动方程方法的陡角度构造深度偏移成像方法.文中针对一类混合域（空间和波数）的波动方程偏移方法展开研究.通过建立反假频的单程波算子和通过（形式上）填充空道重建理想采样的地震数据,有效地实现了陡倾角地层的准确成像.这一算法策略解决了波动方程偏移方法在实际应用中的一个关键问题,从而更好地发挥了波动方程偏移方法在复杂构造成像上的优势.二维理论数据（Marmousi模型）和三维实际地震资料成像结果表明本文方法是有效的.这一方法对现行的三维地震数据处理有重要的现实意义.     

Real-time 3-D space numerical shake prediction for earthquake early warning

In earthquake early warning systems, real-time shake prediction through wave propagation simulation is a promising approach. Compared with traditional methods, it does not suffer from the inaccurate estimation of source parameters. For computation efficiency, wave direction is assumed to propagate on the 2-D surface of the earth in these methods. In fact, since the seismic wave propagates in the 3-D sphere of the earth, the 2-D space modeling of wave direction results in inaccurate wave estimation. In this paper, we propose a 3-D space numerical shake prediction method, which simulates the wave propagation in 3-D space using radiative transfer theory, and incorporate data assimilation technique to estimate the distribution of wave energy. 2011 Tohoku earthquake is studied as an example to show the validity of the proposed model. 2-D space model and 3-D space model are compared in this article, and the prediction results show that numerical shake prediction based on 3-D space model can estimate the real-time ground motion precisely, and overprediction is alleviated when using 3-D space model.     

Discussion on 'Was the 2008 Wenchuan earthquake triggered by Zipingpu Reservoir?'

Some recent publications presented a result suggesting that Zipingpu reservoir hastened the occurrence of the 2008 MS8.0 Wenchuan earthquake by tens to hundreds of years.Their researches calculated the Coulomb stress change induced by Zipingpu reservoir on the rupturing fault of Wenchuan earthquake.Their results,however,are critically dependent upon the 3-D event location,reservoir location,and the fault plane orientation.We repeated Ge et al.'s work in this paper and found that an improper dip angle parameter of their 2-D fault model might lead to a wrong conclusion.Both the modeling results based on the 2-D model and 3-D model with proper fault parameters will show Coulomb stress changes alone were neither large enough nor had the correct orientation to affect the occurrence of Wenchuan earthquake,which supports our recent argument based on the local seismicity analysis and the induced Coulomb stress change calculation with a 3-D model.     

地球横向不均匀结构对地表以及空间固定点同震重力变化的影响

本文提出一个新算法,用来高精度计算三维不均匀地球模型中地震位错引起的地表以及空间固定点同震重力变化.具体地说,我们首先把实际三维不均匀地球分解成球对称地球模型和对应的横向不均匀增量,分别进行计算,二者对应的计算结果分别称为球对称解和三维响应.由于球对称解可直接利用球对称地球模型位错理论计算得到,本文的目标是计算三维响应即地球的横向不均匀结构对同震重力变化的影响.然后,我们把三维响应再分为震源的响应和地球横向不均匀结构的响应,它们可分别借助对震源函数的扰动以及对平衡方程式的变分求解.本文推导出六个特殊点源位错引起的地表以及空间固定点同震重力变化计算公式(一个垂直走滑位错,两个相互垂直的倾滑位错,三个开裂位错),对这些公式进行适当组合就可以计算任意位置任意类型位错产生的同震重力变化,对应的计算公式同步给出.接着,依据36阶P波速度模型,我们利用岩石试验经验关系式推导出三维S波速度模型,密度模型,位场模型以及重力模型.最后,利用上述三维模型,本文计算出三种典型类型的点源位错产生的同震重力变化,结果显示三维响应与位错类型,震源深度都有关系,其最大响应占球对称解的0.5%左右,且在所有影响因素中S波速度模型影响最大.数值结果同时表明,三维响应中震源的响应与地球横向不均匀构造的响应处于同一量级.本文给出的地表和空间固定点同震重力变化计算公式可分别高精度解析地表重力和卫星重力观测数据(GRACE、GOCE等),提高大地测量数据理论解析水平.