南海北部陆坡稳定性定量分析

随着海洋工程的发展,海底滑坡作为一种潜在的地质灾害逐渐成为人们关注的热点.本文采用二维极限平衡法计算并分析了海底斜坡稳定性问题.通过对斜坡模型在各种条件下安全系数的计算,定量分析了斜坡内在因素(如斜坡角度、主要土力学参数)和主要触发机制(地震、快速堆积等)对安全系数的影响.理论计算表明,静态条件下,均质斜坡角度小于20°时,均处于稳定状态;对于含软弱层的斜坡,快速堆积等引起的不排水状态下斜坡安全系数明显降低,斜坡角度大于14°时就会发生失稳.拟静态条件下,当地震动峰值加速度(PGA)小于0.15g时,对于角度小于20°的均质斜坡处于稳定状态,但PGA大于0.25g时,角度大于13°的斜坡即处于失稳状态;对于含软弱层斜坡,PGA为0.1g时,角度大于10°的斜坡即处于不稳定状态;当PGA大于0.3g时,3°以上的海底斜坡即处于失稳状态,发生海底滑坡.结合南海北部陆坡海底地形、地貌特征,在静态条件下,均处于稳定状态;但在地震加载的拟静态下,根据南海北部地震动峰值加速度分布,台湾浅滩段则处于不稳定状态.这解释了该区域大陆坡折带处海底滑坡广泛发育的原因,也表明了地震是引发南海北部滑坡最主要的触发机制之一.     

The shapes of some mountain peaks in the Canadian Rockies

Different mountain shapes in sedimentary sequences in the Canadian Rockies were enhanced by glacial erosion and have been modified postglacially by gravity-driven slope processes. Slope modification by both glacial erosion and postglaciation landslides is related to rock structure, particularly bedding dip, rock mass strength and slope geometry. Five mountain peak shapes in monoclinal sequences each fall into different ranges of bedding dips. Castellate (1) and matterhorn (2) mountains occur in sub-horizontal beds and their slopes on all sides follow combinations of bedding planes and joints. The overall slopes are generally 37 to 65° and oblique to both bedding and joints. Slopes in sub-horizontal beds may be controlled by their rock mass strength. Cuestas (3) develop in gently to moderately dipping beds. Dip slopes and steeper, normal escarpments form their cataclinal and anaclinal sides respectively, with the dihedral angle between them about 90°. Hogbacks (4) in moderately to steeply dipping beds have similar slope angles on both cataclinal and anaclinal slopes. Cataclinal slopes are either dip slopes or underdip slopes but anaclinal slopes are often steepened escarpments; the dihedral angle between the slopes is usually less than 90°. Dogtooth (5) mountains occur in steeply dipping to sub-vertical beds and the dihedral angle can be as low as 60°. Slope gradients in inclined beds are closely related to landslides, whose modes are controlled by bedding dips. Copyright © 1999 John Wiley & Sons, Ltd.     

基于非确定性分析法的顺层边坡抗震性研究

顺层岩质边坡的抗震性指标大部分都是非确定的,无法用固定阈值衡量。提出基于非确定性分析法的顺层边坡抗震性性能研究,将顺层岩质边坡看作若干个叠加的薄板;运用非确定性分析法计算各个薄板的动力安全系数和动力极限状态方程,并对顺层边坡动力极限状态方程进行求解,可得在地震作用力下顺层边坡动力可靠度指标与顺层边坡失效概率之间的关系;评估地震作用力下顺层边坡整体稳定性,同时综合考量顺岩边坡的最小平均安全系数以及平均失效概率,得出评估结果。实验结果显示,在地震作用力下,顺层边坡坡高、坡角、岩层倾角对顺岩边坡抗震性能影响显著,评估结果与实际结果一致。     

开挖岩体边坡卸荷带宽度的计算方法

卸荷带的判别与计算,直接关系到岩体边坡的长期稳定性及致灾安全性。针对均质岩体边坡,采用弹性理论楔形体力学模型,提出了开挖岩体边坡力学模型,建立了开挖岩体边坡应力的计算方法;从开挖高度、开挖坡度、台阶宽度、岩体粘聚力、内摩擦角及岩体容重等方面,通过敏感性分析,探讨了开挖岩体边坡卸荷带宽度的变化规律,据此采用量纲分析法,建立了开挖岩体边坡卸荷带宽度的计算公式。     

地震作用下节理岩质边坡稳定性影响因素研究

汶川地震灾害调查表明,在基岩山区地震滑塌主要发育在局部强度相对较大、节理较发育的厚层或块状岩体中.以岩石中含两组节理的岩质边坡为例,输入实际的地震记录,采用离散单元法进行数值模拟,分别探讨坡高、地震烈度、坡角及节理倾角组合对节理岩质边坡稳定性的影响.结果表明:地震作用下坡体中质点的加速度、速度具有高程放大效应;节理岩质边坡稳定性随着坡高、坡角和地震烈度的增加而降低;两组节理不同组合的岩质边坡,其稳定性变化较为复杂,受节理倾角与坡角的关系、节理的倾向、两组节理之间夹角等因素的影响.节理岩质边坡在地震作用下是受拉区逐渐向受剪区扩展而最终导致边坡失稳破坏,是受拉和受剪的复合破坏.上述初步结论为评价山区节理较发育的岩质边坡在地震作用下的稳定性提供一定的依据.     

极端冰雪条件下的顺层岩质边坡滑移稳定性分析

推导了典型岩石边坡在极端冰雪条件下的滑移稳定系数的表达式;通过计算分析,揭示了岩石边坡滑移稳定系数随裂隙内水深、坡高、坡角、滑面倾角等因素变化的规律及与冻深的关系,并绘制岩石边坡滑移稳定系数与边坡几何要素之间的关系图。研究表明,当考虑极端冰雪灾害影响时,岩石边坡滑移稳定系数发生较为明显的变化：随裂隙饱水程度、坡面角、主滑面倾角的增加而降低,随主滑面抗剪强度的减小而降低;裂隙饱水程度越高、坡体高度越低、坡面角越小、主滑面倾角越大的边坡的滑移稳定系数,对裂隙冰冻胀力的反应越敏感。     

基于粒子群优化算法的边坡临界滑动面搜索方法

采用数值计算结果进行极限平衡分析是边坡稳定性分析的重要方法,最危险滑移面位置的确定是边坡稳定性分析的关键。采用粒子群优化理论控制位于滑移面后缘范围的滑入点和前缘剪出区域的滑出点,以均分逼近法控制滑面半径,实现了边坡内潜在滑移面位置的搜索及安全系数的计算,进而确定了边坡的最小安全系数及最危险潜在滑移面位置,搜索出的滑面不依赖于网格节点。以昆明某公路滑坡为例,将搜索出的最危险滑面与现场勘察成果进行对比,结果表明,采用本文方法计算所得的结果与工程实际较为吻合,证明了该方法的有效性。     

一种适用于黄土斜坡地震稳定性快速评估的综合判别方法——以宁夏西吉县为例

选取宁夏西吉县为目标区,对区内1920年海原8.5级特大地震所诱发的347处黄土地震滑坡进行野外调查,获取了详实的基础数据.在此基础上结合遥感影像解译,总结了研究区内黄土地震滑坡的分布特征,并依此提出了宏观、定性的黄土斜坡地震稳定性快速判别方法.基于分布特征选取了坡高、坡角、坡向及地震动强度作为基本参数,应用MLP神经...     

地震与水压力耦合作用下岩质边坡倾覆解析方法

以往对平面破坏模式的岩质边坡稳定性评价,主要关注潜在滑坡体在自重、坡体内静水压力和地震荷载耦合作用下沿破坏面的抗滑稳定性,并未涉及各类外荷载作用线不通过潜在滑体重心而引起的绕坡趾倾覆稳定性。针对这一问题,提出地震与张裂缝水压耦合作用下的岩质边坡倾覆稳定性解析方法,基于力矩平衡原理推导出岩质边坡抗倾覆稳定性系数的一般表达式;通过深入的变动参数比较研究,探讨张裂缝水压和地震荷载对抗倾覆安全系数的影响,认为水压是控制岩质边坡倾覆破坏的决定性因素,而地震荷载处于次要因素,其在一定程度上增加或减小抗倾覆稳定性。在此基础上建立不同参数组合下的岩质边坡抗倾覆稳定图,为工程技术人员快速评估饱水岩质边坡地震倾覆稳定性提供直接依据。     

Slope seismic stability analysis on kinematical element method and its application

In this paper, kinematical element method (KEM) is extended to the solution of seismic slope stability with the pseudo-static approach. Analytical expressions are derived to calculate the factor of safety of slopes subjected to seismic loading and pore-water pressure. KEM is adopted to assess seismic stability of slope and some examples show that the results obtained from KEM, limit equilibrium method (LEM), variational method and strength reduction method (SRM) are generally in good agreement. And then the seismic slope stability charts are developed on the basis of KEM and pseudo-static approach, providing a rapid and reliable way to calculate the factor of safety and the location of critical slip surface without iteration. Based on the above seismic slope stability charts, a new back analysis method is presented. KEM and pseudo-static approach are applied to study the effect of blasting on the stability of open pit slope, and the approach to determine the relationship between critical explosive weight and distance is presented.     

区域边坡地震危险性评价理论研究进展

地震滑坡会对自然环境和人民生活带来极大破坏,在大区域范围内对边坡遭受地震影响的程度进行评价判断,主要采用具有预测性质的潜在地震诱发滑坡危险性评估的方法。因此,深入研究边坡地震危险性分析的基本理论并作出符合实际的危险性分布图对工程建设和灾害防治具有较大意义。梳理并阐述具有预测性质的边坡地震危险性分析所需数据资料及各类数据的研究进展,将利用永久位移法进行边坡地震危险性评价所需数据归纳为三种：(1)边坡在地震影响下破坏程度的判定依据;(2)区域地震动参数如峰值加速度、阿里亚斯强度;(3)边坡坡体基本参数如黏聚力、摩擦角、重度、滑块厚度、坡角等。边坡地震危险性评价的准确程度与这三类数据的研究程度与准确性有关。文章对三类数据分别详细阐述各自的研究现状与成果应用,最后分析理论存在的部分问题以及以后的研究方向。     

层状结构岩质边坡动力稳定性试验研究

介绍了所进行的层状结构岩质边坡动力稳定性试验。结果表明，在水平地震动加速度达到0．4g时，层状结构岩质边坡就会出现局部的层间错动现象，当水平地震加速度达到0．8g时，层间结合力较弱的边坡将发生大面积的表面滑动和崩塌。而在铅直地震力作用下，当地震加速度达到1.0g时，才会出现破坏现象。因而对层状结构岩质边坡来说，其水平地震力造成的危害是主要的。     

加筋土边坡临界滑动场

在分析加筋土边坡稳定性时,将加筋材料的作用视为施加于滑面上的等效力,建立了满足力平衡的加筋土边坡安全系数的计算格式;将边坡临界滑动场数值模拟方法进行推广,提出了基于力平衡的加筋土边坡临界滑动场计算方法,可以得到形状任意的临界滑动面及边坡最小安全系数。通过算例,比较加筋前后临界滑动面和安全系数的变化,并探讨了加筋水平间距、强度、长度对加筋土边坡稳定性的影响。     

基于拟动力法的顺层岩质边坡稳定性极限分析

基于极限分析上限法的原理,结合随时间变化的拟动力法,考虑地震、水力和坡顶超载作用下建立含张拉裂缝的顺层岩质边坡极限分析模型,并推导出边坡安全系数的表达式。结构面采用合理的水压力分布形式,且强度参数采用非等比例折减,分析边坡前缘是否堵塞,水平和竖向地震系数、张裂缝积水深度和坡顶超载对边坡安全系数的影响。分析表明:边坡前缘堵塞、水平地震系数、张裂缝积水深度和坡顶超载的增加,降低边坡的稳定性;竖向地震系数的增加提高了边坡的稳定性。随着非等比例折减相关系数的增加,边坡稳定性显著提高。因此结构面参数的变化规律需要得到关注。     

基于Logistic回归模型的黄土斜坡地震稳定性快速评判方法

黄土地震滑坡是陇西地区黄土丘陵地区的主要地质灾害之一,快速评价黄土斜坡的地震稳定性是陇西地区工程建设规划选址以及地震应急救援的需求。在野外调查及遥感解译获取坡高H、坡角α及估计烈度值I的基础上,运用逻辑回归分析方法,拟合得到研究区黄土斜坡地震稳定性的快速评价经验公式,经回判、判别校验及实例判别应用证明,该经验公式适用于快速评估陇西地区内黄土斜坡的地震稳定性。该文提出的方法对黄土地区城市建设规划和地震应急救援有重要的应用价值。     

CHARACTERISTICS AND FORMATION MECHANISM OF LARGE ROCK AVALANCHES TRIGGERED BY THE LUDIAN MS6.5 EARTHQUAKE AT HONGSHIYAN AND GANJIAZHAI

The 3 August 2014 Ludian, Yunnan M_S6.5 earthquake has spawned more than 1, 000 landslides which are from several tens to several millions and over ten millions of cubic meters in volumes. Among them, the Hongshiya and Ganjiazai landslides are the biggest two with volumes over 1 000×10⁴m³. The Hongshiya and Ganjiazai landslides are two typical landslides, the former belongs to tremendous rock avalanche, and the latter belongs to unconsolidated werthering deposit landslide developed in concave mountain slope. Based on field investigations, causes and formation mechanism of the two landslides are discussed in this study. The neotectonic movement in the area maintains sustainable uplifting violently all the time since Cenozoic. The landform process accompanied with the regional tectonic uplifting is the violent downward erosion along the Jinshajiang River and its tributary, forming landforms of high mountains and canyons, deeply cut valleys, with great height difference. The regional seismo-tectonics situation suggests that:Ludian earthquake region is situated on the southern frontier boundary of Daliangshan secondary active block, and is seismically the strongest active area with one earthquake of magnitude greater than M5.0 occurring every 6 years. Frequent and strong seismicity produces accumulated effects on the ground rock to gradually lower the mechanical strength of slopes and their stability, which is the basis condition to generate large-scale collapse and landslide at Hongshiyan and Ganjiazhai. The occurring of Hongshiyan special large rock avalanche is associated with the large terrain height difference, steep slope, soft interlayer structure and unloading fissures and high-angle joints. The formation mechanism of Hongshiyan rock avalanche may have three stages as follows:Stage 1, when P wave arriving, under the situation of free surface, rocks shake violently, the pre-existent joints(in red)parallel to and normal to the river and unloading cracks are opened and connected. Stage 2, on the basis of the first stage, when S wave arriving, the ground movement aggravates. Joints(in green)along beds develop further, resulting in rock masses intersecting each other. Stage 3, rock masses lose stability, sliding downward, collapsing, and moving over a short distance along the sliding surface to the inside of the valley, blocking the river to form the dammed lake. The special large landslide at Ganjiazhai is a weathering layer landslide occurring in the middle-lower of a large concave slope. Its formation process may have two stages as follows:Firstly, under strong ground shaking and gravity, the ground rock-soil body around moves and assembles to the lower of the central axis of the large concave slope, which suffers the largest earthquake inertia force and firstly yields plastic damage to generate compression-expansion deformation, because of the largest water content and volume-weight within the loose soil of it. Secondly, in view of the steep slope, along with the compression, the plastic deformation area enlarges further in the lower of slope, giving rise to a tensional stress area along the middle of the slope. As soon as the tensional stress exceeds the tensile strength of the weathering layer, a tensional fracture will occur and the landslide rolls away immediately making use of momentum. This two large landslides are the basic typical ones triggered by the M_S6.5 Ludian earthquake, and their causes and mechanism have a certain popular implication for the landslides occurring in this earthquake region.     

山西地震带中与强震活动有关的两种滑坡

本文以滑波理论为依据，总结了山西地震带的两种不同特点的滑坡。即：振荡式滑坡及触发式滑坡。虽然两种滑坡都可分为变形、解体、滑动、毁灭等四个阶段，但其动力不同。振荡式滑波的滑动面倾角小，因而滑力来源于强震振动，而触发式滑坡的滑动面倾角大，因而滑力来自滑体本身静荷载。对两种滑坡的研究对预防及减轻强震带来的次生灾害有重要的意义。     

线性波浪加载下海底斜坡失稳机制的数值分析

基于大型有限元软件ABAQUS中的荷载模块,添加一阶波浪力载荷模式,并结合强度折减技术,实现波浪力作用下海底斜坡稳定性与失稳机制的弹塑性有限元数值分析。引入典型算例,利用先前提出的波浪荷载下海底斜坡稳定性的极限分析上限方法开展数值解的对比验证;在此基础上,通过深入地变动参数比较分析,探讨不同波长、波高和水深等波浪参数对计算结果的影响以及波浪力影响下海底斜坡潜在滑动面的变化规律,获得波浪荷载下海底斜坡失稳滑动机制的初步认识。     

岩层倾角对顺倾向边坡地震效应的影响

利用FLAC3D软件模拟地震作用下不同岩层倾角的顺倾向边坡,对比坡面峰值加速度放大系数、峰值位移、地震作用结束后坡体剪应变增量的变化规律,探讨岩层倾角对顺倾边坡地震效应的影响。研究表明:(1)在水平地震波作用下,坡面水平峰值加速度放大作用随岩层倾角增大而线性减小;(2)当岩层倾角小于软弱岩层内摩擦角时,坡面峰值位移较小且变化规律受岩层倾角影响不明显,当岩层倾角大于软弱岩层内摩擦角且小于30°时坡面峰值位移增大,大于60°时减小;(3)岩层倾角小于坡角时,残余剪应变增量最大值集中在坡面中下部软弱岩层处,反之,剪应变增量最大值出现在整个坡面并呈弧形区。     

Seismic stability of jointed rock slopes under obliquely incident earthquake waves

Seismic stability of slopes has been traditionally analyzed with vertically propagated earthquake waves. However, for rock slopes, the earthquake waves might approach the outcrop still with a evidently oblique direction. To investigate the impact of obliquely incident earthquake excitations, the input method for SV and P waves with arbitrary incident angles is conducted, respectively, by adopting the equivalent nodal force method together with a viscous-spring boundary. Then, the input method is introduced within the framework of ABAQUS software and verified by a numerical example. Both SV and P waves input are considered herein for a 2D jointed rock slope. For the jointed rock mass, the jointed material model in ABAQUS software is employed to simulate its behavior as a continuum. Results of the study show that the earthquake incident angles have significance on the seismic stability of jointed rock slopes. The larger the incident angle, the greater the risk of slope instability. Furthermore, the stability of the jointed rock slopes also is affected by wave types of earthquakes heavily. P waves induce weaker responses and SV waves are shown to be more critical.