Iron and magnesium isotopic compositions of peridotite xenoliths from Eastern China

We present high-precision measurements of Mg and Fe isotopic compositions of olivine, orthopyroxene (opx), and clinopyroxene (cpx) for 18 lherzolite xenoliths from east central China and provide the first combined Fe and Mg isotopic study of the upper mantle. δ⁵⁶Fe in olivines varies from 0.18‰ to −0.22‰ with an average of −0.01 ± 0.18‰ (2SD, n = 18), opx from 0.24‰ to −0.22‰ with an average of 0.04 ± 0.20‰, and cpx from 0.24‰ to −0.16‰ with an average of 0.10 ± 0.19‰. δ²⁶Mg of olivines varies from −0.25‰ to −0.42‰ with an average of −0.34 ± 0.10‰ (2SD, n = 18), opx from −0.19‰ to −0.34‰ with an average of −0.25 ± 0.10‰, and cpx from −0.09‰ to −0.43‰ with an average of −0.24 ± 0.18‰. Although current precision (∼±0.06‰ for δ⁵⁶Fe; ±0.10‰ for δ²⁶Mg, 2SD) limits the ability to analytically distinguish inter-mineral isotopic fractionations, systematic behavior of inter-mineral fractionation for both Fe and Mg is statistically observed: Δ⁵⁶Fe_ol-cpx = −0.10 ± 0.12‰ (2SD, n = 18); Δ⁵⁶Fe_ol-opx = −0.05 ± 0.11‰; Δ²⁶Mg_ol-opx = −0.09 ± 0.12‰; Δ²⁶Mg_ol-cpx = −0.10 ± 0.15‰. Fe and Mg isotopic composition of bulk rocks were calculated based on the modes of olivine, opx, and cpx. The average δ⁵⁶Fe of peridotites in this study is 0.01 ± 0.17‰ (2SD, n = 18), similar to the values of chondrites but slightly lower than mid-ocean ridge basalts (MORB) and oceanic island basalts (OIB). The average δ²⁶Mg is −0.30 ± 0.09‰, indistinguishable from chondrites, MORB, and OIB. Our data support the conclusion that the bulk silicate Earth (BSE) has chondritic δ⁵⁶Fe and δ²⁶Mg.The origin of inter-mineral fractionations of Fe and Mg isotopic ratios remains debated. δ⁵⁶Fe between the main peridotite minerals shows positive linear correlations with slopes within error of unity, strongly suggesting intra-sample mineral-mineral Fe and Mg isotopic equilibrium. Because inter-mineral isotopic equilibrium should be reached earlier than major element equilibrium via chemical diffusion at mantle temperatures, Fe and Mg isotope ratios of coexisting minerals could be useful tools for justifying mineral thermometry and barometry on the basis of chemical equilibrium between minerals. Although most peridotites in this study exhibit a narrow range in δ⁵⁶Fe, the larger deviations from average δ⁵⁶Fe for three samples likely indicate changes due to metasomatic processes. Two samples show heavy δ⁵⁶Fe relative to the average and they also have high La/Yb and total Fe content, consistent with metasomatic reaction between peridotite and Fe-rich and isotopically heavy melt. The other sample has light δ⁵⁶Fe and slightly heavy δ²⁶Mg, which may reflect Fe-Mg inter-diffusion between peridotite and percolating melt.     

Effects of aridity and vegetation on plant-wax δD in modern lake sediments

We analyzed the deuterium composition of individual plant-waxes in lake sediments from 28 watersheds that span a range of precipitation D/H, vegetation types and climates. The apparent isotopic fractionation (ε_a) between plant-wax n-alkanes and precipitation differs with watershed ecosystem type and structure, and decreases with increasing regional aridity as measured by enrichment of ²H and ¹⁸O associated with evaporation of lake waters. The most negative ε_a values represent signatures least affected by aridity; these values were −125 ± 5‰ for tropical evergreen and dry forests, −130‰ for a temperate broadleaf forest, −120 ± 9‰ for the high-altitude tropical páramo (herbs, shrubs and grasses), and −98 ± 6‰ for North American montane gymnosperm forests. Minimum ε_a values reflect ecosystem-dependent differences in leaf water enrichment and soil evaporation. Slopes of lipid/lake water isotopic enrichments differ slightly with ecosystem structure (i.e. open shrublands versus forests) and overall are quite small (slopes = 0-2), indicating low sensitivity of lipid δD variations to aridity compared with coexisting lake waters. This finding provides an approach for reconstructing ancient precipitation signatures based on plant-wax δD measurements and independent proxies for lake water changes with regional aridity. To illustrate this approach, we employ paired plant-wax δD and carbonate-δ¹⁸O measurements on lake sediments to estimate the isotopic composition of Miocene precipitation on the Tibetan plateau.     

The geochemical behavior and isotopic composition of Hg in a mid-Pleistocene western Mediterranean sapropel

The concentrations of mercury (Hg) and other trace metals (Ni, Cu, Zn, Mo, Ba, Re, U) and the Hg isotopic composition were examined across a dramatic redox and productivity transition in a mid-Pleistocene Mediterranean Sea sapropel sequence. Characteristic trace metal enrichment in organic-rich layers was observed, with organic-rich sapropel layers ranging in Hg concentration from 314 to 488 ng/g (avg = 385), with an average enrichment in Hg by a factor of 5.9 compared to organic-poor background sediments, which range from 39 to 94 ng/g Hg (avg = 66). Comparison of seawater concentrations and sapropel accumulations of trace metals suggests that organic matter quantitatively delivers Hg to the seafloor. Near complete scavenging of Hg from the water column renders the sapropel Hg isotopic composition representative of mid-Pleistocene Mediterranean seawater. Sapropels have an average δ²⁰²Hg value of −0.91‰ ± 0.15‰ (n = 5, 1 SD) and Δ¹⁹⁹Hg value of 0.11‰ ± 0.03‰ (n = 5, 1 SD). Background sediments have an average δ²⁰²Hg of −0.76‰ ± 0.16‰ (n = 5, 1 SD) and Δ¹⁹⁹Hg of 0.05‰ ± 0.01‰ (n = 5, 1 SD), which is indistinguishable from the sapropel values. We suggest that the sapropel isotopic composition is most representative of the mid-Pleistocene Tyrrhenian Sea.     

Early diagenetic processes during Mn-carbonate formation: evidence from the isotopic composition of authigenic Ca-rhodochrosites of the Baltic Sea

The formation of authigenic Ca-rich rhodochrosite (ACR) in sapropelic sediments of the Gotland Basin, Baltic Sea, is governed by deepwater renewal processes whereby saline water from the North Atlantic flushes the brackish anoxic Baltic Deeps. The carbon and oxygen isotopic compositions of these Mn-carbonates suggest that ACR formation takes place just below the sediment surface and that dissolved compounds from the deepwater column, such as water and bicarbonate molecules, were incorporated in ACR during authigenesis. Porewaters near the sediment surface display δ¹⁸O values of −5.4‰ (VSMOW) and are generally depleted in ¹⁸O, compared to the oxygen isotopic composition of water in equilibrium with Mn-carbonate solid solutions (ACR δ¹⁸O values are −4.6‰). This suggests that early burial diagenetic processes significantly modify the initial isotopic composition of water during Mn-carbonate formation. The reduction of sulfate having δ¹⁸O values of +8.4‰ accounts for a permanent enrichment of porewater ¹⁸O and observed δ¹⁸O values at depth equal to −4.6‰. However, this process does not explain the observed disequilibrium in the oxygen isotopic composition between water and ACR close to the sediment surface where Mn-carbonate formation takes place. Based on isotopic mass balance calculations, we suggest that MnO₂ with δ¹⁸O values of +8.9‰ released oxygen enriched in ¹⁸O into the anoxic porewaters close below the sediment surface. This process should occur after oxygenation events during deepwater renewal when MnO₂ accumulates at the surface of anoxic sediments. Manganese carbonates formed in these waters display δ¹⁸O values of ∼1.0‰ heavier than values expected solely from the initial deepwater composition. This quantitatively explains the discrepancy between paleosalinities calculated from ACR δ¹⁸O based on Mn-carbonate/water isotopic equilibrium fractionation and direct observations for the same period. Our results emphasize the important role of microbial MnO₂ reduction during rhodochrosite authigenesis and suggest that Mn(II) activity, rather than alkalinity, is the limiting component for sedimentary Mn-carbonate formation.     

A compound-specific n-alkane δC and δD approach for assessing source and delivery processes of terrestrial organic matter within a forested watershed in northern Japan

We measured molecular distributions and compound-specific hydrogen (δD) and stable carbon isotopic ratios (δ¹³C) of mid- and long-chain n-alkanes in forest soils, wetland peats and lake sediments within the Dorokawa watershed, Hokkaido, Japan, to better understand sources and processes associate with delivery of terrestrial organic matter into the lake sediments. δ¹³C values of odd carbon numbered C₂₃-C₃₃n-alkanes ranged from −37.2‰ to −31.5‰, while δD values of these alkanes showed a large degree of variability that ranged from −244‰ to −180‰. Molecular distributions in combination with stable carbon isotopic compositions indicate a large contribution of C3 trees as the main source of n-alkanes in forested soils whereas n-alkanes in wetland soil are exclusively derived from marsh grass and/or moss. We found that the n-alkane δD values are much higher in forest soils than wetland peat. The higher δD values in forest samples could be explained by the enrichment of deuterium in leaf and soil waters due to increased evapotranspiration in the forest or differences in physiology of source plants between wetland and forest. A δ¹³C vs. δD diagram of n-alkanes among forest, wetland and lake samples showed that C₂₅-C₃₁n-alkanes deposited in lake sediments are mainly derived from tree leaves due to the preferential transport of the forest soil organic matter over the wetland or an increased contribution of atmospheric input of tree leaf wax in the offshore sites. This study demonstrates that compound-specific δD analysis provides a useful approach for better understanding source and transport of terrestrial biomarkers in a C3 plant-dominated catchment.     

Geochemical characterization of secondary microbial gas occurrence in the Songliao Basin, NE China

A suite of natural gases from the northern Songliao Basin in NE China were characterized for their molecular and carbon isotopic composition. Gases from shallow reservoirs display clear geochemical evidence of alteration by biodegradation, with very high dryness (C₁/C₂₊ > 100), high C₂/C₃ and i-C₄/n-C₄ ratios, high nitrogen content and variable carbon dioxide content. Isotopic values show wide range variations (δ¹³C_CH4 from −79.5‰ to −45.0‰, δ¹³C_C2H6 from −53.7‰ to −32.2‰, δ¹³C_C3H8 from −36.5‰ to −20.1‰, δ¹³C_nC4H10 from −32.7‰ to −24.5‰, and δ¹³C_CO2 from −21.6‰ to +10.5‰). A variety of genetic types can be recognized on the basis of chemical and isotopic composition together with their geological occurrence. Secondary microbial gas generation was masked by primary microbial gas and the mixing of newly generated methane with thermogenic methane already in place in the reservoir can cause very complicated isotopic signatures. System openness also was considered for shallow biodegraded gas accumulations. Gases from the Daqing Anticline are relatively wet with ¹³C enriched methane and ¹³C depleted CO₂, representing typically thermogenic origin. Gases within the Longhupao-Da’an Terrace have variable dryness, ¹³C enriched methane and variable δ¹³C of CO₂, suggesting dominant thermogenic origin and minor secondary microbial methane augment. The Puqian-Ao’nan Uplift contains relatively dry gas with ¹³C depleted methane and ¹³C enriched CO₂, typical for secondary microbial gas with a minor part of thermogenic methane. Gas accumulations in the Western Slope are very dry with low carbon dioxide concentrations. Some gases contain ¹³C depleted methane, ethane and propane, indicating low maturity/primary microbial origin. Recognition of varying genetic gas types in the Songliao Basin helps explain the observed dominance of gas in the shallow reservoir and could serve as an analogue for other similar shallow gas systems.     

O and S isotopic composition of dissolved and attached oxidation products of pyrite by Acidithiobacillus ferrooxidans: Comparison with abiotic oxidations

The acidophilic iron-oxidizing bacterium, Acidithiobacillus ferrooxidans, plays a part in the pyrite oxidation process and has been widely studied in order to determine the kinetics of the reactions and the isotopic composition of dissolved product sulphates, but the details of the oxidation processes at the surface of pyrite are still poorly known. In this study, oxygen and sulphur isotopic compositions (δ¹⁸O and δ³⁴S) were analyzed for dissolved sulphates and water from experimental aerobic acidic (pH < 2) pyrite oxidation by A. ferrooxidans. The oxidation products attached to the pyrite surfaces were studied for their morphology (SEM), their chemistry (Raman spectroscopy) and for their δ¹⁸O (ion microprobe). They were compared to abiotically (Fe³⁺, H₂O₂, O₂) oxidized pyrite surface compounds in order to constrain the oxidation pathways and to look for the existence of potential biosignatures for this system.The pyrite dissolution evolved from non-stoichiometric (during the first days) to stoichiometric (with increasing time) resulting in dissolved sulphates having distinct δ¹⁸O (e.g. +11.0‰ and −2.0‰, respectively) and δ³⁴S (+4.5‰ and +2.8‰, respectively) values. The “oxidation layer” at the surface of pyrite is complex and made of iron oxides, sulphate, polysulphide, elemental sulphur and polythionates. Bio- and Fe³⁺-oxidation favour the development of monophased micrometric bumps made of hematite or sulphate while other abiotic oxidation processes result in more variable oxidation products. The δ¹⁸O of these oxidation products at the surface of oxidized pyrites are strongly variable (from ≈−40‰ to ≈+30‰) for all experiments.Isotopic fractionation between sulphates and pyrite, Δ³⁴S_SO4-pyrite, is equal to −1.3‰ and +0.4‰ for sulphates formed by stoichiometric and non-stoichiometric processes, respectively. These two values likely reflect either a S-S or a Fe-S bond breaking process. The Δ¹⁸O_SO4-H2O and Δ¹⁸O_SO4-O2 are estimated to be ≈+16‰ and ≈−25‰, respectively. These values are higher than previously published data and may reflect biological effects. The large δ¹⁸O heterogeneity measured at the surfaces of oxidized pyrites, whatever the oxidant, may be related (i) to the existence of local surface environments isolated from the solution in which the oxidation processes are different and (ii) to the stabilization at the pyrite surface of reaction intermediates that are not in isotopic equilibrium with the solution. Though the oxygen isotopic composition of surface oxidation products cannot be taken as a direct biosignature, the combined morphological, chemical and isotopic characterization of the surfaces of oxidized pyrites may furnish clues about a biological activity on a mineral surface.     

Stable isotope and petrologic evidence for open-system degassing during the climactic and pre-climactic eruptions of Mt. Mazama, Crater Lake, Oregon

Evaluation of the extent of volatile element recycling in convergent margin volcanism requires delineating likely source(s) of magmatic volatiles through stable isotopic characterization of sulfur, hydrogen and oxygen in erupted tephra with appropriate assessment of modification by degassing. The climactic eruption of Mt. Mazama ejected approximately 50 km³ of rhyodacitic magma into the atmosphere and resulted in formation of a 10-km diameter caldera now occupied by Crater Lake, Oregon (lat. 43°N, long. 122°W). Isotopic compositions of whole-rocks, matrix glasses and minerals from Mt. Mazama climactic, pre-climactic and postcaldera tephra were determined to identify the likely source(s) of H₂O and S. Integration of stable isotopic data with petrologic data from melt inclusions has allowed for estimation of pre-eruptive dissolved volatile concentrations and placed constraints on the extent, conditions and style of degassing.Sulfur isotope analyses of climactic rhyodacitic whole rocks yield δ³⁴S values of 2.8-14.8‰ with corresponding matrix glass values of 2.4-13.2‰. δ³⁴S tends to increase with stratigraphic height through climactic eruptive units, consistent with open-system degassing. Dissolved sulfur concentrations in melt inclusions (MIs) from pre-climactic and climactic rhyodacitic pumices varies from 80 to 330 ppm, with highest concentrations in inclusions with 4.8-5.2 wt% H₂O (by FTIR). Up to 50% of the initial S may have been lost through pre-eruptive degassing at depths of 4-5 km. Ion microprobe analyses of pyrrhotite in climactic rhyodacitic tephra and andesitic scoria indicate a range in δ³⁴S from −0.4‰ to 5.8‰ and from −0.1‰ to 3.5‰, respectively. Initial δ³⁴S values of rhyodacitic and andesitic magmas were likely near the mantle value of 0‰. Hydrogen isotope (δD) and total H₂O analyses of rhyodacitic obsidian (and vitrophyre) from the climactic fall deposit yielded values οf −103 to −53‰ and 0.23-1.74 wt%, respectively. Values of δD and wt% H₂O of obsidian decrease towards the top of the fall deposit. Samples with depleted δD, and mantle δ¹⁸O values, have elevated δ³⁴S values consistent with open-system degassing. These results imply that more mantle-derived sulfur is degassed to the Earth’s atmosphere/hydrosphere through convergent margin volcanism than previously attributed. Magmatic degassing can modify initial isotopic compositions of sulfur by >14‰ (to δ³⁴S values of 14‰ or more here) and hydrogen isotopic compositions by 90‰ (to δD values of −127‰ in this case).     

Behaviour of Li and its isotopes during metasomatism of French Massif Central lherzolites

Li behaviour and distribution in the mantle were investigated by ion microprobe in situ measurements on co-existing olivine (ol), orthopyroxene (opx), clinopyroxene (cpx) and amphibole (amp) in xenoliths from the French Massif Central. The fertile spinel lherzolites of this study record increasing degrees of mantle metasomatism, from unmetasomatised anhydrous samples through cryptically metasomatised samples to highly metasomatised amphibole-rich samples. In anhydrous lherzolites, Li is preferentially incorporated into olivine (1.1-1.4 ppm, average values) compared to pyroxenes (0.2-0.9 ppm). The hydrous samples clearly show enrichment of Li in ol (1.5-5.0 ppm), opx (1.1-2.4 ppm) and cpx (2.4-5.4 ppm), while amphibole incorporates less Li than the co-existing phases (0.8-1.3 ppm). Average δ⁷Li values range from +7.6 to +14.5‰ in ol, from 5.1 to +13.7‰ in opx and from 8.8 to +10.3‰ in cpx from the anhydrous lherzolites. A layered peridotite sample (Sdi) shows higher Li content in all phases, with lighter isotopic composition in opx and cpx (−0.6 and −2‰ average δ⁷Li values, respectively). In the hydrous lherzolites average δ⁷Li values both overlap and extend beyond these ranges in ol (up to 17.5 ‰) and in opx (up to 22.9‰), and vary widely in cpx (−2.7 to +9.7‰). Low δ⁷Li values are observed in some opx (−10.4‰) and cpx (−13‰) from sample Sdi, and in cpx from three hydrous samples (from −9.7 to −5.3‰). The different anhydrous phases from the hydrous samples show large intra-grain variations in Li isotopic ratios (e.g., up to 18‰) compared to the same phases from the anhydrous samples (mostly less than 6‰), excepting sample Sdi which has up to 20.4‰ variation in cpx. Similar to the anhydrous silicates, amphiboles show a wide variation of δ⁷Li values on the intra-grain scale (2-27‰). These variations are interpreted to result from fractionation processes during metasomatism by a silicate melt undergoing compositional changes as it percolates through and reacts with the peridotite phases. Thus Li abundances and isotopic in situ measurements are useful for tracing metasomatic processes but the heterogeneities observed in the samples preclude any identification of a specific mantle source by its Li signature.     

Magnesium isotopic composition of the Earth and chondrites

To constrain further the Mg isotopic composition of the Earth and chondrites, and investigate the behavior of Mg isotopes during planetary formation and magmatic processes, we report high-precision (±0.06‰ on δ²⁵Mg and ±0.07‰ on δ²⁶Mg, 2SD) analyses of Mg isotopes for (1) 47 mid-ocean ridge basalts covering global major ridge segments and spanning a broad range in latitudes, geochemical and radiogenic isotopic compositions; (2) 63 ocean island basalts from Hawaii (Kilauea, Koolau and Loihi) and French Polynesia (Society Island and Cook-Austral chain); (3) 29 peridotite xenoliths from Australia, China, France, Tanzania and USA; and (4) 38 carbonaceous, ordinary and enstatite chondrites including 9 chondrite groups (CI, CM, CO, CV, L, LL, H, EH and EL).Oceanic basalts and peridotite xenoliths have similar Mg isotopic compositions, with average values of δ²⁵Mg = −0.13 ± 0.05 (2SD) and δ²⁶Mg = −0.26 ± 0.07 (2SD) for global oceanic basalts (n = 110) and δ²⁵Mg = −0.13 ± 0.03 (2SD) and δ²⁶Mg = −0.25 ± 0.04 (2SD) for global peridotite xenoliths (n = 29). The identical Mg isotopic compositions in oceanic basalts and peridotites suggest that equilibrium Mg isotope fractionation during partial melting of peridotite mantle and magmatic differentiation of basaltic magma is negligible. Thirty-eight chondrites have indistinguishable Mg isotopic compositions, with δ²⁵Mg = −0.15 ± 0.04 (2SD) and δ²⁶Mg = −0.28 ± 0.06 (2SD). The constancy of Mg isotopic compositions in all major types of chondrites suggest that primary and secondary processes that affected the chemical and oxygen isotopic compositions of chondrites did not significantly fractionate Mg isotopes.Collectively, the Mg isotopic composition of the Earth’s mantle, based on oceanic basalts and peridotites, is estimated to be −0.13 ± 0.04 for δ²⁵Mg and −0.25 ± 0.07 for δ²⁶Mg (2SD, n = 139). The Mg isotopic composition of the Earth, as represented by the mantle, is similar to chondrites. The chondritic composition of the Earth implies that Mg isotopes were well mixed during accretion of the inner solar system.     

Paleoclimate record in the Nubian Sandstone Aquifer,Sinai Peninsula,Egypt

Sixteen groundwater samples collected from production wells tapping Lower Cretaceous Nubian Sandstone and fractured basement aquifers in Sinai were analyzed for their stable isotopic compositions, dissolved noble gas concentrations (recharge temperatures), tritium activities, and ¹⁴C abundances. Results define two groups of samples: Group I has older ages, lower recharge temperatures, and depleted isotopic compositions (adjusted ¹⁴C model age: 24,000–31,000 yr BP; δ¹⁸O: − 9.59‰ to − 6.53‰; δ²H: − 72.9‰ to − 42.9‰; < 1 TU; and recharge T: 17.5–22.0°C) compared to Group II (adjusted ¹⁴C model age: 700–4700 yr BP; δ¹⁸O: − 5.89‰ to − 4.84‰; δ²H: − 34.5‰ to − 24.1‰; < 1 to 2.78 TU; and recharge T: 20.6–26.2°C). Group II samples have isotopic compositions similar to those of average modern rainfall, with larger d-excess values than Group I waters, and locally measurable tritium activity (up to 2.8 TU). These observations are consistent with (1) the Nubian Aquifer being largely recharged prior to and/or during the Last Glacial Maximum (represented by Group I), possibly through the intensification of paleowesterlies; and (2) continued sporadic recharge during the relatively dry and warmer interglacial period (represented by Group II) under conditions similar to those of the present.     

Iron isotope variations in Holocene sediments of the Gotland Deep, Baltic Sea

Holocene sediments from the Gotland Deep basin in the Baltic Sea were investigated for their Fe isotopic composition in order to assess the impact of changes in redox conditions and a transition from freshwater to brackish water on the isotope signature of iron. The sediments display variations in δ⁵⁶Fe (differences in the ⁵⁶Fe/⁵⁴Fe ratio relative to the IRMM-14 standard) from −0.27 ± 0.09‰ to +0.21 ± 0.08‰. Samples deposited in a mainly limnic environment with oxygenated bottom water have a mean δ⁵⁶Fe of +0.08 ± 0.13‰, which is identical to the mean Fe isotopic composition of igneous rocks and oxic marine sediments. In contrast, sediments that formed in brackish water under periodically euxinic conditions display significantly lighter Fe isotope signatures with a mean δ⁵⁶Fe of −0.14 ± 0.19‰. Negative correlations of the δ⁵⁶Fe values with the Fe/Al ratio and S content of the samples suggest that the isotopically light Fe in the periodically euxinic samples is associated with reactive Fe enrichments and sulfides. This is supported by analyses of pyrite separates from this unit that have a mean Fe isotopic composition of −1.06 ± 0.20‰ for δ⁵⁶Fe. The supply of additional Fe with a light Fe isotopic signature can be explained with the shelf to basin Fe shuttle model. According to the Fe shuttle model, oxides and benthic ferrous Fe that is derived from dissimilatory iron reduction from shelves is transported and accumulated in euxinic basins. The data furthermore suggest that the euxinic water has a negative dissolved δ⁵⁶Fe value of about −1.4‰ to −0.9‰. If negative Fe isotopic signatures are characteristic for euxinic sediment formation, widespread euxinia in the past might have shifted the Fe isotopic composition of dissolved Fe in the ocean towards more positive δ⁵⁶Fe values.     

Grain-scale iron isotopic distribution of pyrite from Precambrian shallow marine carbonate revealed by a femtosecond laser ablation multicollector ICP-MS technique: Possible proxy for the redox state of ancient seawater

The redox state of Precambrian shallow seas has been linked with material cycle and evolution of the photosynthesis-based ecosystem. Iron is a redox-sensitive element and exists as a soluble Fe(II) species or insoluble Fe(III) species on Earth’s surface. Previous studies have shown that the iron isotopic ratio of marine sedimentary minerals is useful for understanding the ocean redox state, although the redox state of the Archean shallow sea is poorly known. This is partly because the conventional bulk isotope analytical technique has often been used, wherein the iron isotopic record may be dampened by the presence of isotopically different iron-bearing minerals within the same sample. Here we report a microscale iron isotopic ratio of individual pyrite grains in shallow marine stromatolitic carbonates over geological time using a newly developed, near-infrared femtosecond laser ablation multicollector ICP-MS technique (NIR-fs-LA-MC-ICP-MS).We have determined that the grain-scale iron isotopic distribution of pyrite from coeval samples shows a bimodal (2.7 and 2.3 Ga) or unimodal pattern (2.9, 2.6, and 0.7 Ga). In particular, pyrite from the 2.7 Ga Fortescue Group shows a unique bimodal distribution with highly positive (+1.0‰ defined as Type 1) and negative δ⁵⁶Fe values (−1.8‰ defined as Type 2). Type 1 and 2 pyrites occasionally occur within different siliceous layers in the same rock specimen. Layer-scale iron isotopic heterogeneity indicates that the iron isotopic ratios of the two types of pyrite are not homogenized by diagenesis after deposition. Some cubic pyrites have a core with a positive δ⁵⁶Fe value (1‰) and a rim with a crustal δ⁵⁶Fe value (0‰). The observed isotopic zoning suggests that the positive δ⁵⁶Fe value is a primary signature at the time of stromatolite formation, while secondary pyrite precipitated during diagenesis.The positive δ⁵⁶Fe value of Type 1 and the large iron isotopic difference between Type 1 and 2 (2.8‰.) suggest partial Fe(II) oxidation in the 2.7-Ga shallow sea, i.e., pyritization of ⁵⁶Fe-enriched ferric oxyhydroxide (Type 1) and ⁵⁶Fe depleted Fe²⁺aq in seawater (Type 2). Type 2 pyrite was probably not produced by microbial iron redox cycling during diagenesis because this scenario requires a higher abundance of pyrite with δ⁵⁶Fe of 0‰ than of −1.8‰. Consequently, the degree of Fe(II) oxidation in the 2.7-Ga shallow sea can be estimated by a Fe²⁺aq steady-state model. The model calculation shows that half the Fe²⁺aq influx was oxidized in the seawater. This implies that O₂ produced by photosynthesis would have been completely consumed by oxidation of the Fe²⁺aq influx. Grain-scale iron isotopic distribution of pyrite could be a useful index for reconstructing the redox state of the Archean shallow sea.     

Selenium isotopes trace the source and redox processes in the black shale-hosted Se-rich deposits in China

We analyzed the Se isotopic composition of black shales and related kerogen and sulfide fractions from the Zunyi Ni-Mo-Se deposit, the La’erma Se-Au deposit and the Yutangba Se deposit in southern China to constrain metal sources and accumulation processes, both subjects of disagreement in the scientific community. Se at the Zunyi Ni-Mo-Se polymetallic deposit displayed a restricted range of δ⁸²Se values (−1.6‰ to 2.4‰ with a mean of 0.6‰) suggesting a major hydrothermal origin where aqueous Se was probably transported as H₂Se, along with H₂S, and precipitated directly as selenides or in sulfides. Se at the La’erma Se-Au deposit covers a larger range in δ⁸²Se values (−3.8‰ to 5.4‰ with a mean of 0.3‰), suggesting Se redistribution following redox transformations, leading to kinetic isotopic fractionation. The largest Se isotopic variation so far in natural terrestrial samples was found in the Yutangba Se deposit, with δ⁸²Se values varying from −12.77‰ to 4.93‰. On the basis of variations in Se isotopes in the deposit, along with other geological and geochemical evidence, the “redox model” (supergene alteration) explains the occurrence of native Se in the deposit. Overall, hydrothermal systems may be a potentially important Se source to form economic deposits in comparison to seawater sources. Significantly, our study indicates that either secondary hydrothermal or supergene alteration is a key factor in Se enrichment in black shales. Redistribution of Se, and probably other redox-sensitive metals like Mo, Cr and V, leads to isotopic fractionation which may be used to fingerprint such alteration/precipitation processes.     

Archaea mediate anaerobic oxidation of methane in deep euxinic waters of the Black Sea

We evaluate anaerobic oxidation of methane (AOM) in the Black Sea water column by determining distributions of archaea-specific glyceryl dialkyl glyceryl tetraethers (GDGTs) and ¹³C isotopic compositions of their constituent biphytanes in suspended particulate matter (SPM), sinking particulate matter collected in sediment traps, and surface sediments. We also determined isotopic compositions of fatty acids specific to sulfate-reducing bacteria to test for biomarker and isotopic evidence of a syntrophic relationship between archaea and sulfate-reducing bacteria in carrying out AOM. Bicyclic and tricyclic GDGTs and their constituent ¹³C-depleted monocyclic and bicyclic biphytanes (down to −67‰) indicative of archaea involved in AOM were present in SPM in the anoxic zone below 700 m depth. In contrast, GDGT-0 and crenarchaeol derived from planktonic crenarchaeota dominated the GDGT distributions in the oxic surface and shallow anoxic waters. Fatty acids indicative of sulfate-reducing bacteria (i.e., iso- and anteiso-C₁₅) were not strongly isotopically depleted (e.g., −32 to −25‰), although anteiso-C₁₅ was 5‰ more depleted in ¹³C than iso-C₁₅. Our results suggest that either AOM is carried out by archaea independent of sulfate-reducing bacteria or those sulfate-reducing bacteria involved in a syntrophy with methane-oxidizing archaea constitute a small enough fraction of the total sulfate-reducing bacterial community that an isotope depletion in their fatty acids is not readily detected. Sinking particulate material collected in sediment traps and the underlying sediments in the anoxic zone contained the biomarker and isotope signature of upper-water column archaea. AOM-specific GDGTs and ¹³C-depleted biphytanes characteristic of the SPM in the deep anoxic zone are not incorporated into sinking particles and are not efficiently transported to the sediments. This observation suggests that sediments may not always record AOM in overlying euxinic water columns and helps explain the absence of AOM-derived biomarkers in sediments deposited during past periods of elevated levels of methane in the ocean.     

Boron isotopic composition of atmospheric precipitations and liquid-vapour fractionations

Boron isotope compositions (δ¹¹B) and B concentrations of rains and snows were studied in order to characterize the sources and fractionation processes during the boron atmospheric cycle. The ¹¹B/¹⁰B ratios of instantaneous and cumulative rains and snows from coastal and continental sites show a large range of variations, from −1.5 ± 0.4 to +26.0 ± 0.5‰ and from −10.2 ± 0.5 to +34.4 ± 0.2‰, respectively. Boron concentrations in rains and snows vary between 0.1 and 3.0 ppb. All these precipitation samples are enriched in ¹⁰B compared to the ocean value (δ¹¹B = +39.5‰). An empirical rain-vapour isotopic fractionation of +31‰ is estimated from three largely independent methods. The deduced seawater-vapour fractionation is +25.5‰, with the difference between the rain and seawater fractionations principally reflecting changes in the speciation of boron in the liquid with ∼100% B(OH)₃ present in precipitations. A boron meteoric water line, δD = 2.6δ¹¹B − 133, is proposed which describes the relationship between δD and δ¹¹B in many, but not all, precipitations. Boron isotopic compositions of precipitations can be related to that of the seawater reservoir by the seawater-vapour fractionation and one or more of (1) the rain-vapour isotopic fractionation, (2) evolution of the δ¹¹B value of the atmospheric vapour reservoir via condensation-precipitation processes (Rayleigh distillation process), (3) any contribution of vapour from the evaporation of seawater aerosols, and (4) any contribution from particulate matter, principally sea salt, continental dust and, perhaps more regionally, anthropogenic sources (burning of biomass and fossil fuels). From the δ¹¹B values of continental precipitations, a sea salt contribution cannot be more than a percent or so of the total B in precipitation over these areas.     

Preservation of organic matter and alteration of its carbon and nitrogen isotope composition during simulated and in situ early sedimentary diagenesis

The carbon and nitrogen isotope composition of organic matter has been widely used to trace biogeochemical processes in marine and lacustrine environments. In order to reconstruct past environmental changes from sedimentary organic matter, it is crucial to consider potential alteration of the primary isotopic signal by bacterial degradation in the water column and during early diagenesis in the sediments.In a series of oxic and anoxic incubation experiments, we examined the fate of organic matter and the alteration of its carbon and nitrogen isotopic composition during microbial degradation. The decomposition rates determined with a double-exponential decay model show that the more reactive fraction of organic matter degrades at similar rates under oxic and anoxic conditions. However, under oxic conditions the proportion of organic matter resistent to degradation is much lower than under anoxic conditions. Within three months of incubation the δ¹³C of bulk organic matter decreased by 1.6‰ with respect to the initial value. The depletion can be attributed to the selective preservation of ¹³C-depleted organic compounds. During anoxic decay, the δ¹⁵N values continuously decreased to about 3‰ below the initial value. The decrease probably results from bacterial growth adding ¹⁵N-depleted biomass to the residual material. In the oxic experiment, δ¹⁵N values increased by more then 3‰ before decreasing to a value indistinguishable from the initial isotopic composition. The dissimilarity between oxic and anoxic conditions may be attributed to differences in the type, timing and degree of microbial activity and preferential degradation. In agreement with the anoxic incubation experiments, sediments from eutrophic Lake Lugano are, on average, depleted in ¹³C (−1.5‰) and ¹⁵N (−1.2‰) with respect to sinking particulate organic matter collected during a long-term sediment trap study.     

Copper isotopic zonation in the Northparkes porphyry Cu-Au deposit, SE Australia

Significant, systematic Cu isotopic variations have been found in the Northparkes porphyry Cu-Au deposit, NSW, Australia, which is an orthomagmatic porphyry Cu deposit. Copper isotope ratios have been measured in sulfide minerals (chalcopyrite and bornite) by both solution and laser ablation multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS). The results from both methods show a variation in δ⁶⁵Cu of hypogene sulfide minerals of greater than 1‰ (relative to NIST976). Significantly, the results from four drill holes through two separate ore bodies show strikingly similar patterns of Cu isotope variation. The patterns are characterized by a sharp down-hole decrease from up to 0.8‰ (0.29 ± 0.56‰, 1σ, n = 20) in the low-grade peripheral alteration zones (phyllic-propylitic alteration zone) to a low of ∼−0.4‰ (−0.25 ± 0.36‰, 1σ, n = 30) at the margins of the most mineralized zones (Cu grade >1 wt%). In the high-grade cores of the systems, the compositions are more consistent at around 0.2‰ (0.19 ± 0.14‰, 1σ, n = 40). The Cu isotopic zonation may be explained by isotope fractionation of Cu between vapor, solution and sulfides at high temperature, during boiling and sulfide precipitation processes. Sulfur isotopes also show an isotopically light shell at the margins of the high-grade ore zones, but these are displaced from the low δ⁶⁵Cu shells, such that there is no correlation between the Cu and S isotope signatures. Fe isotope data do not show any discernable variation along the drill core. This work demonstrates that Cu isotopes show a large response to high-temperature porphyry mineralizing processes, and that they may act as a vector to buried mineralization.     

Paleoenvironmental implications of taxonomic variation among δN values of chloropigments

Natural variations in the ratios of nitrogen isotopes in biomass reflect variations in nutrient sources utilized for growth. In order to use δ¹⁵N values of chloropigments of photosynthetic organisms to determine the corresponding δ¹⁵N values of biomass - and by extension, surface waters - the isotopic offset between chlorophyll and biomass must be constrained. Here we examine this offset in various geologically-relevant taxa, grown using nutrient sources that may approximate ocean conditions at different times in Earth’s history. Phytoplankton in this study include cyanobacteria (diazotrophic and non-diazotrophic), eukaryotic algae (red and green), and anoxygenic photosynthetic bacteria (Proteobacteria), as well as environmental samples from sulfidic lake water. Cultures were grown using N₂, NO₃⁻, and NH₄⁺ as nitrogen sources, and were examined under different light regimes and growth conditions. We find surprisingly high variability in the isotopic difference (δ¹⁵N_biomass − δ¹⁵N_{chloropigment}) for prokaryotes, with average values for species ranging from −12.2‰ to +11.7‰. We define this difference as ε_por, a term that encompasses diagenetic porphyrins and chlorins, as well as chlorophyll. Negative values of ε_por reflect chloropigments that are ¹⁵N-enriched relative to biomass. Notably, this enrichment appears to occur only in cyanobacteria. The average value of ε_por for freshwater cyanobacterial species is −9.8 ± 1.8‰, while for marine cyanobacteria it is −0.9 ± 1.3‰. These isotopic effects group environmentally but not phylogenetically, e.g., ε_por values for freshwater Chroococcales resemble those of freshwater Nostocales but differ from those of marine Chroococcales. Our measured values of ε_por for eukaryotic algae (range = 4.7-8.7‰) are similar to previous reports for pure cultures. For all taxa studied, values of ε_por do not depend on the type of nitrogen substrate used for growth. The observed environmental control of ε_por suggests that values of ε_por could be useful for determining the fractional burial of eukaryotic vs. cyanobacterial organic matter in the sedimentary record.     

Anaerobic propane oxidation in marine hydrocarbon seep sediments

Propane (C₃H₈) is an abundant hydrocarbon in subsurface reservoirs with significance to atmospheric chemistry and to marine biogeochemistry. The anaerobic oxidation of propane coupled to sulfate reduction may prevent sub-seafloor accumulations of propane from entering the ocean and atmosphere. Anaerobic oxidation of propane has recently been demonstrated in cultures of novel sulfate-reducing bacteria, but has not been directly demonstrated or quantified in nature. In this work we describe a method involving incubation with ¹³C-propane to quantify rates of anaerobic oxidation of propane in anoxic sediment, and we conclusively demonstrate the oxidation of propane under sulfidic conditions in fresh sediments of a marine hydrocarbon seep. Observed rates of anaerobic oxidation of propane adhere to first-order kinetic behavior, enabling the modification of this method for whole core rate determinations. Whole core rates in nine cores from two hydrocarbon seeps measured 0.04-2100 nmoles C₃H₈ cm⁻³ day⁻¹ by this method. The seep persistently supplied with more propane displayed substantially higher rates of anaerobic oxidation of propane, by 1-2 orders of magnitude when averaged over the top 10-cm, suggesting the development of the microbial community is strongly modulated by the availability of propane. This work is the first to estimate rates for anaerobic oxidation of propane in any environment, and demonstrates the potential importance of the process as a filter for preventing propane from entering the ocean and atmosphere.