Silicon isotopes in meteorites and planetary core formation

The silicon (Si) isotope compositions of 42 meteorite and terrestrial samples have been determined using MC-ICPMS with the aim of resolving the current debate over their compositions and the implications for core formation. No systematic δ³⁰Si differences are resolved between chondrites (δ³⁰Si = −0.49 ± 0.15‰, 2σ_SD) and achondrites (δ³⁰Si = −0.47 ± 0.11‰, 2σ_SD), although enstatite chondrites are consistently lighter (δ³⁰Si = −0.63 ± 0.07‰, 2σ_SD) in comparison to other meteorite groups. The data reported here for meteorites and terrestrial samples display an average difference Δ³⁰Si_{BSE−meteorite∗} = 0.15 ± 0.10‰, which is consistent within uncertainty with previous studies. No effect from sample heterogeneity, preparation, chemistry or mass spectrometry can be identified as responsible for the reported differences between current datasets. The heavier composition of the bulk silicate Earth is consistent with previous conclusions that Si partitioned into the metal phase during metal-silicate equilibration at the time of core formation. Fixing the temperature of core formation to the peridotite liquidus and using an appropriate metal silicate fractionation factor (ε ∼0.89), the Δ³⁰Si_{BSE−meteorite∗} value from this study indicates that the Earth core contains at least 2.5 and possibly up to 16.8 wt% Si.     

Deciphering interaction of regional aquifers in Southern Tunisia using hydrochemistry and isotopic tools

Groundwater is the most important source of water supply in southern Tunisia. Previous hydrogeologic and isotopic studies carried out in this region revealed the existence of two major aquifer systems: the “Complex Terminal” (CT) and the “Continental Intercalaire” (CI). Turonian carbonates constitute one of the major aquifer levels of the CT multilayered aquifer. It extends over most of southern Tunisia, and its hydrodynamic regime is largely influenced by tectonics, lithology and recharge conditions. Forty-eight groundwater samples from the CI and Turonian aquifers were collected between January and April 2004 for chemical and isotopic analyses. Hydrochemistry and isotopic tools were combined to get an insight into the processes controlling chemical composition of groundwater and wide-scale interaction of these two aquifer systems. Analysis of the dissolved constituents revealed that several processes control the observed chemical composition: (i) incongruent dissolution of carbonate minerals, (ii) dissolution of evaporitic minerals, and (iii) cation exchange. Dissolution alone cannot account for the observed high supersaturation states of groundwater with respect to calcite and dolomite. The observed supersaturation is most probably linked to geogenic CO₂ entering water-bearing horizons of the CT and CI aquifers via deep tectonic faults and discontinuities and subsequent degassing in the exploitation wells. Presence of geogenic CO₂ in the investigated region was confirmed by C isotope data of the DIC reservoir. The radiocarbon content of the Turonian samples varied between 9.5 and 43 pmc. For CI samples generally lower values were recorded, between 3.8 and 22.5 pmc. Stable isotope composition of Turonian groundwater samples varied from −8.3 to −5.3‰ for δ¹⁸O and from −60 to −25‰ for δ²H. The corresponding ranges of δ values for the Continental Intercalaire samples were from −8.9‰ to −6.9‰ for δ¹⁸O and from −68.2‰ to −45.7‰ for δ²H. Stable isotope composition of groundwater representing CT and CI aquifers provide strong evidence for regional interaction between both systems.     

Variations of δSi and Ge/Si with weathering and biogenic input in tropical basaltic ash soils under monoculture

In soils, silicon released by mineral weathering can be retrieved from soil solution through clay formation, Si adsorption onto secondary oxides and plant uptake, thereby impacting the Si-isotopic signature and Ge/Si ratio of dissolved Si (DSi) exported to rivers. Here we use these proxies to study the contribution of biogenic Si (BSi) in a soil-plant system involving basaltic ash soils differing in weathering degree under intensive banana cropping. δ³⁰Si and Ge/Si ratios were determined in bulk soils (<2 mm), sand (50-2000 μm), silt (2-50 μm), amorphous Si (ASi, 2-50 μm) and clay (<2 μm) fractions: δ³⁰Si by MC-ICP-MS Nu Plasma in medium resolution, operating in dry plasma with Mg doping (δ³⁰Si vs. NBS28 ± 0.12‰ ± 2σ_SD), Ge/Si computed after determination of Ge and Si concentrations by HR-ICP-MS and ICP-AES, respectively. Components of the ASi fraction were quantified by microscopic counting (phytoliths, diatoms, ashes). Compared to fresh ash (δ³⁰Si = −0.38‰; Ge/Si = 2.21 μmol mol⁻¹), soil clay fractions (<2 μm) were enriched in light Si isotopes and Ge: with increasing weathering degree, δ³⁰Si decreased from −1.19 to −2.37‰ and Ge/Si increased from 4.10 to 5.25 μmol mol⁻¹. Sand and silt fractions displayed δ³⁰Si values close to fresh ash (−0.33‰) or higher due to saharian dust quartz deposition, whose contribution was evaluated by isotopic mass balance calculation. Si-isotopic signatures of bulk soils (<2 mm) were strongly governed by the relative proportions of primary and secondary minerals: the bulk soil Si-isotopic budget could be closed indicating that all the phases involved were identified. Microscopic counting highlighted a surface accumulation of banana phytoliths and a stable phytolith pool from previous forested vegetation. δ³⁰Si and Ge/Si values of clay fractions in poorly developed volcanic soils, isotopically heavier and Ge-depleted in surface horizons, support the occurrence of a DSi source from banana phytolith dissolution, available for Si sequestration in clay-sized secondary minerals (clay minerals formation and Si adsorption onto Fe-oxide). In the soil-plant system, δ³⁰Si and Ge/Si are thus highly relevant to trace weathering and input of DSi from phytoliths in secondary minerals, although not quantifying the net input of BSi to DSi.     

Sources and biological fractionation of Silicon isotopes in the Eastern Equatorial Pacific

Silicon isotopes in dissolved silicic acid were measured in the upper four kilometers between 4°N and 3°S latitude at 110°W longitude in the eastern Equatorial Pacific. Silicon isotopes became progressively heavier with silicic acid depletion of surface water as expected from biological fractionation. The value of ε estimated by applying a steady-state isotope fractionation model to data from all stations between 4°N and 3°S was −0.77 ± 0.12‰ (std. err.). When the analysis was restricted to those stations whose temperature and salinity profiles indicated that they were directly influenced by upwelling of the Equatorial Undercurrent (EUC), the resulting value of ε was −1.08 ± 0.27‰ (std. err.) similar to the value established in culture studies (−1.1‰). When the non steady state Rayleigh model was applied to the same restricted data set the resulting value of ε was significantly more positive, −0.61 ± 0.16‰ (std. err.). To the extent that the equatorial system approximates a steady state these results support a value of −1.1‰ for the fractionation factor for isotopes of Si in the sea. Without the assumption of steady state the value of ε can only be constrained to be between −0.6 and −1.1‰. Silicic acid in Equatorial Pacific Deep Water below 2000 m had a near constant δ³⁰Si of +1.32 ± 0.05‰. That value is significantly more positive than obtained for North Pacific Deep Water at similar depths at stations to the northwest of our study area (0.9-1.0‰) and it is slightly less positive than new measures of the δ³⁰Si of silicic acid from the silicic acid plume centered over the Cascadia basin in the Northeast Pacific (Si(OH)₄ > 180  μM, δ³⁰Si = +1.46 ± 0.12‰ (SD, n = 4). We show that the data from the equator and Cascadia basin fit a general trend of increasing δ³⁰Si(OH)₄ with increasing silicic acid concentration in the deep sea, but that the isotope values from the Northeast Pacific are anomalously light. The observed level of variation in the silicon isotope composition of deep waters from this single ocean basin is considerably larger than that predicted by current models based on fractionation during opal formation with no isotope effect during dissolution. Confirmation of such high variability in deep water δ³⁰Si(OH)₄ within individual ocean basins will require reassessment of the mechanisms controlling the distribution of isotopes of silicon in the sea.     

SIMS analyses of silicon and oxygen isotope ratios for quartz from Archean and Paleoproterozoic banded iron formations

Banded iron formations (BIFs) are chemical marine sediments dominantly composed of alternating iron-rich (oxide, carbonate, sulfide) and silicon-rich (chert, jasper) layers. Isotope ratios of iron, carbon, and sulfur in BIF iron-bearing minerals are biosignatures that reflect microbial cycling for these elements in BIFs. While much attention has focused on iron, banded iron formations are equally banded silica formations. Thus, silicon isotope ratios for quartz can provide insight on the sources and cycling of silicon in BIFs. BIFs are banded by definition, and microlaminae, or sub-mm banding, are characteristic of many BIFs. In situ microanalysis including secondary ion mass spectrometry is well-suited for analyzing such small features. In this study we used a CAMECA IMS-1280 ion microprobe to obtain highly accurate (±0.3‰) and spatially resolved (∼10 μm spot size) analyses of silicon and oxygen isotope ratios for quartz from several well known BIFs: Isua, southwest Greenland (∼3.8 Ga); Hamersley Group, Western Australia (∼2.5 Ga); Transvaal Group, South Africa (∼2.5 Ga); and Biwabik Iron Formation, Minnesota, USA (∼1.9 Ga). Values of δ¹⁸O range from +7.9‰ to +27.5‰ and include the highest reported δ¹⁸O values for BIF quartz. Values of δ³⁰Si have a range of ∼5‰ from −3.7‰ to +1.2‰ and extend to the lowest δ³⁰Si values for Precambrian cherts. Isua BIF samples are homogeneous in δ¹⁸O to ±0.3‰ at mm- to cm-scale, but are heterogeneous in δ³⁰Si up to 3‰, similar to the range in δ³⁰Si found in BIFs that have not experienced high temperature metamorphism (up to 300 °C). Values of δ³⁰Si for quartz are homogeneous to ±0.3‰ in individual sub-mm laminae, but vary by up to 3‰ between multiple laminae over mm-to-cm of vertical banding. The scale of exchange for Si in quartz in BIFs is thus limited to the size of microlaminae, or less than ∼1 mm. We interpret differences in δ³⁰Si between microlaminae as preserved from primary deposition. Silicon in BIF quartz is mostly of marine hydrothermal origin (δ³⁰Si < −0.5‰) but silicon from continental weathering (δ³⁰Si ∼ 1‰) was an important source as early as 3.8 Ga.     

Magnesium-isotope fractionation during low-Mg calcite precipitation in a limestone cave - Field study and experiments

The chemical and isotopic composition of speleothem calcite and particularly that of stalagmites and flowstones is increasingly exploited as an archive of past environmental change in continental settings. Despite intensive research, including modelling and novel approaches, speleothem data remain difficult to interpret. A possible way foreword is to apply a multi-proxy approach including non-conventional isotope systems. For the first time, we here present a complete analytical dataset of magnesium isotopes (δ²⁶Mg) from a monitored cave in NW Germany (Bunker Cave). The data set includes δ²⁶Mg values of loess-derived soil above the cave (−1.0 ± 0.5‰), soil water (−1.2 ± 0.5‰), the carbonate hostrock (−3.8 ± 0.5‰), dripwater in the cave (−1.8 ± 0.2‰), speleothem low-Mg calcite (stalactites, stalagmites; −4.3 ± 0.6‰), cave loam (−0.6 ± 0.1‰) and runoff water (−1.8 ± 0.1‰) in the cave, respectively. Magnesium-isotope fractionation processes during weathering and interaction between soil cover, hostrock and solute-bearing soil water are non-trivial and depend on a number of variables including solution residence times, dissolution rates, adsorption effects and potential neo-formation of solids in the regolith and the carbonate aquifer. Apparent Mg-isotope fractionation between dripwater and speleothem low-Mg calcite is about 1000lnα_Mg-cc-Mg(aq) = −2.4‰. A similar Mg-isotope fractionation (1000lnα_Mg-cc-Mg(aq) ≈ −2.1‰) is obtained by abiogenic precipitation experiments carried out at aqueous Mg/Ca ratios and temperatures close to cave conditions. Accordingly, ²⁶Mg discrimination during low-Mg calcite formation in caves is highly related to inorganic fractionation effects, which may comprise dehydration of Mg²⁺ prior to incorporation into calcite, surface entrapment of light isotopes and reaction kinetics. Relevance of kinetics is supported by a significant negative correlation of Mg-isotope fractionation with the precipitation rate for inorganic precipitation experiments.     

Note on the isotopic geochemistry of fossil-lacustrine tufas in carbonate plateau—A study from Dungul region (SW Egypt)

Lithological, chemical, and stable isotope data are used to characterize lacustrine tufas dating back to pre-late Miocene and later unknown times, capping different surfaces of a Tertiary carbonate (Sinn el-Kedab) plateau in Dungul region in the currently hyperarid south-western Egypt. These deposits are composed mostly of calcium carbonate, some magnesium carbonate and clastic particles plus minor amounts of organic matter. They have a wide range of (Mg/Ca)_molar ratios, from 0.03 to 0.3. The bulk-tufa carbonate has characteristic isotope compositions: (δ¹³C_mean = −2.49 ± 0.99‰; δ¹⁸O_mean = −9.43 ± 1.40‰). The δ¹³C values are consistent with a small input from C4 vegetation or thinner soils in the recharge area of the tufa-depositing systems. The δ¹⁸O values are typical of fresh water carbonates. Covariation between δ¹³C and δ¹⁸O values probably is a reflection of climatic conditions such as aridity. The tufas studied are isotopically similar to the underlying diagenetic marine chalks, marls and limestones (δ¹³C_mean = −2.06 ± 0.84‰; δ¹⁸O_mean = −10.06 ± 1.39‰). The similarity has been attributed to common meteoric water signatures. This raises large uncertainties in using tufas (Mg/Ca)_molar, δ¹³C and δ¹⁸O records as proxies of paleoclimatic change and suggests that intrinsic compositional differences in material sources within the plateau may mask climatic changes in the records.     

Paleowaters in Silurian-Devonian carbonate aquifers: Geochemical evolution of groundwater in the Great Lakes region since the Late Pleistocene

Changes in the climatic conditions during the Late Quaternary and Holocene greatly impacted the hydrology and geochemical evolution of groundwaters in the Great Lakes region. Increased hydraulic gradients from melting of kilometer-thick Pleistocene ice sheets reorganized regional-scale groundwater flow in Paleozoic aquifers in underlying intracratonic basins. Here, we present new elemental and isotopic analyses of 134 groundwaters from Silurian-Devonian carbonate and overlying glacial drift aquifers, along the margins of the Illinois and Michigan basins, to evaluate the paleohydrology, age distribution, and geochemical evolution of confined aquifer systems. This study significantly extends the spatial coverage of previously published groundwaters in carbonate and drift aquifers across the Midcontinent region, and extends into deeper portions of the Illinois and Michigan basins, focused on the freshwater-saline water mixing zones. In addition, the hydrogeochemical data from Silurian-Devonian aquifers were integrated with deeper basinal fluids, and brines in Upper Devonian black shales and underlying Cambrian-Ordovician aquifers to reveal a regionally extensive recharge system of Pleistocene-age waters in glaciated sedimentary basins. Elemental and isotope geochemistry of confined groundwaters in Silurian-Devonian carbonate and glacial drift aquifers show that they have been extensively altered by incongruent dissolution of carbonate minerals, dissolution of halite and anhydrite, cation exchange, microbial processes, and mixing with basinal brines. Carbon isotope values of dissolved inorganic carbon (DIC) range from −10 to −2‰, ⁸⁷Sr/⁸⁶Sr ratios range from 0.7080 to 0.7090, and δ³⁴S-SO₄ values range from +10 to 30‰. A few waters have elevated δ¹³C_DIC values (>15‰) from microbial methanogenesis in adjacent organic-rich Upper Devonian shales. Radiocarbon ages and δ¹⁸O and δD values of confined groundwaters indicate they originated as subglacial recharge beneath the Laurentide Ice Sheet (14-50 ka BP, −15 to −13‰ δ¹⁸O). These paleowaters are isolated from shallow flow systems in overlying glacial drift aquifers by lake-bed clays and/or shales. The presence of isotopically depleted waters in Paleozoic aquifers at relatively shallow depths illustrates the importance of continental glaciation on regional-scale groundwater flow. Modern groundwater flow in the Great Lakes region is primarily restricted to shallow unconfined glacial drift aquifers. Recharge waters in Silurian-Devonian and unconfined drift aquifers have δ¹⁸O values within the range of Holocene precipitation: −11 to −8‰ and −7 to −4.5‰ for northern Michigan and northern Indiana/Ohio, respectively. Carbon and Sr isotope systematics indicate shallow groundwaters evolved through congruent dissolution of carbonate minerals under open and closed system conditions (δ¹³C_DIC = −14.7 to−11.1‰ and ⁸⁷Sr/⁸⁶Sr = 0.7080-0.7103). The distinct elemental and isotope geochemistry of Pleistocene- versus Holocene-age waters further confirms that surficial flow systems are out of contact with the deeper basinal-scale flow systems. These results provide improved understanding of the effects of past climate change on groundwater flow and geochemical processes, which are important for determining the sustainability of present-day water resources and stability of saline fluids in sedimentary basins.     

Application of sulphur isotope ratios to examine weaning patterns and freshwater fish consumption in Roman Oxfordshire, UK

This study investigates the application of sulphur isotope ratios (δ³⁴S) in combination with carbon (δ¹³C) and nitrogen (δ¹⁵N) ratios to understand the influence of environmental sulphur on the isotopic composition of archaeological human and faunal remains from Roman era sites in Oxfordshire, UK. Humans (n = 83), terrestrial animals (n = 11), and freshwater fish (n = 5) were analysed for their isotope values from four locations in the Thames River Valley, and a broad range of δ³⁴S values were found. The δ³⁴S values from the terrestrial animals were highly variable (−13.6‰ to +0.5‰), but the δ³⁴S values of the fish were clustered and ³⁴S-depleted (−20.9‰ to −17.3‰). The results of the faunal remains suggest that riverine sulphur influenced the terrestrial sulphur isotopic signatures. Terrestrial animals were possibly raised on the floodplains of the River Thames, where highly ³⁴S-depleted sulphur influenced the soil. The humans show the largest range of δ³⁴S values (−18.8‰ to +9.6‰) from any archaeological context to date. No differences in δ³⁴S values were found between the males (−7.8 ± 6.0‰) and females (−5.3 ± 6.8‰), but the females had a linear correlation (R² = 0.71; p < 0.0001) between their δ¹⁵N and δ³⁴S compositions. These δ³⁴S results suggest a greater dietary variability for the inhabitants of Roman Oxfordshire than previously thought, with some individuals eating solely terrestrial protein resources and others showing a diet almost exclusively based on freshwater protein such as fish. Such large dietary variability was not visible by analysing only the carbon and nitrogen isotope ratios, and this research represents the largest and most detailed application of δ³⁴S analysis to examine dietary practices (including breastfeeding and weaning patterns) during the Romano-British Period.     

Oxygen isotope analyses of fine silica grains using laser-extraction technique: Comparison with oxygen isotope data obtained from ion microprobe analyses and application to quartzite and silcrete cement investigation

The laser fluorination technique reported here for analyzing the oxygen isotope composition (δ¹⁸O) of fine quartz size fractions 50-20, 20-10, 10-5, 5-2, 2-1 and <1 μm has been validated by comparison with the ion microprobe technique. It yields accurate δ¹⁸O data with an external precision better than 0.15‰. This is a significant methodological improvement for isotopic studies dealing with materials such as soil or biogenic oxides and silicates: particles are often too small and recovered in insufficient amount to be easily handled for ion microprobe analysis. Both techniques were used to investigate δ¹⁸O composition of a Cretaceous quartzite and silcrete sequence from the South-East of France. Quartzite cements average 31.04 ± 1.93‰. They formed from Mid-Cretaceous seawater. Higher in the series, silcretes cements average 26.66 ± 1.36‰. They formed from Upper- or post-Upper-Cretaceous soil water and groundwater. Oxygen isotope data show that the silicification steps from one mineralogical phase to another and from one layer to another (including from an upper pedogenic silcrete to a lower groundwater silcrete) occurred in a closed or weakly evaporating hydrological system.     

Sulfur and carbon isotope records from 1700 to 800 Ma carbonates of the Jixian section, northern China: Implications for secular isotope variations in Proterozoic seawater and relationships to global supercontinental events

This study is a comprehensive, stable isotope survey of the marine carbonate-dominated, upper Paleo- to lower Neoproterozoic stratigraphy of Jixian County, China. Carbonate-associated sulfate (CAS) was extracted and measured for δ³⁴S_CAS using the same samples analyzed for δ¹³C_carbonate. This integrated proxy approach is a step towards a more comprehensive picture of secular variation in the composition of Proterozoic seawater. We specifically sampled marine carbonate intervals from the lower section of the Chuanlinggou Formation, Changcheng Group (ca. 1700 Ma) to the top of the Jingeryu Formation, Qingbaikou Group (ca. 800 Ma). δ¹³C_carbonate values are mostly negative in the upper Paleoproterozoic Changcheng Group, with an ascending trend from −3‰ to 0‰. We observed variation of approximately 0 ± 1‰ in the Mesoproterozoic Jixian Group, and positive values of +2 ± 2‰ characterize the lower Neoproterozoic Qingbaikou Group. Stratigraphic variations in δ³⁴S_CAS are more remarkable in their ranges and magnitudes, including conspicuously high values exceeding +30‰ in the three intervals at ca. 1700 Ma, 1300-1100 Ma, and 1000-900 Ma. In the Changcheng Group, δ³⁴S_CAS values are typically higher than +25‰, with only a few values of less than +15‰. In contrast, most of the data spanning from the Mesoproterozoic Tieling Formation of the Jixian Group to the lower Neoproterozoic Jingeryu Formation of the Qingbaikou Group are highly variable between +10‰ and +25‰, with some values exceeding +25‰.In the late Paleoproterozoic (1700-1600 Ma), a >10‰ decrease in δ³⁴S_CAS and ∼3‰ increase in δ¹³C_carbonate are coincident with, and likely related to, the breakup of Columbia, a supercontinent that predated Rodinia. Carbon and sulfur isotope data from the Mesoproterozoic, when global tectonic activity was comparatively weaker, fall mostly in the ranges of +15 ± 10‰ and 0 ± 1‰, respectively, but fluctuations of >20‰ for δ³⁴S_CAS and >3‰ for the δ¹³C_carbonate at ca. 1450-1400 Ma may reflect subduction and large-scale magmatic activity in island arcs marking the end of Columbia breakup. From the late Mesoproterozoic (ca. 1300-1100 Ma) to the early Neoproterozoic (ca. 800 Ma), the δ¹³C and δ³⁴S of seawater increased gradually with increasing variability. Most impressive areδ³⁴S_CAS values that exceed +30‰ in two intervals at ca. 1300-1100 Ma and ca. 1000-900 Ma, which may reflect the assembly and early breakup of Rodinia. Although gaps in the record remain, and studies of even higher resolution are warranted, our results suggest that changes in paleoceanographic conditions linked to global tectonics strongly influenced the biogeochemical cycles of C and S. Furthermore, periods of the Proterozoic previously noted for their isotopic invariability show clear isotopic expressions of this tectonic activity.     

Tissue N content and N natural abundance in epilithic mosses for indicating atmospheric N deposition in the Guiyang area,SW China

Tissue N contents and δ¹⁵N signatures in 175 epilithic mosses were investigated from urban to rural sites in Guiyang (SW China) to determine atmospheric N deposition. Moss N contents (0.85–2.97%) showed a significant decrease from the urban area (mean = 2.24 ± 0.32%, 0–5 km) to the rural area (mean = 1.27 ± 0.13%, 20–25 km), indicating that the level of N deposition decreased away from the urban environment, while slightly higher N contents re-occurred at sites beyond 30 km, suggesting higher N deposition in more remote rural areas. Moss δ¹⁵N ranged from −12.50‰ to −1.39‰ and showed a clear bimodal distribution (−12‰ to −6‰ and −5‰ to −2‰), suggesting that there are two main sources for N deposition in the Guiyang area. More negative δ¹⁵N (mean = −8.87 ± 1.65‰) of urban mosses mainly indicated NH₃ released from excretory wastes and sewage, while the less negative δ¹⁵N (from −3.83 ± 0.82‰ to −2.48 ± 0.95‰) of rural mosses were mainly influenced by agricultural NH₃. With more negative values in the urban area than in the rural area, the pattern of moss δ¹⁵N variation in Guiyang was found to be opposite to cities where N deposition is dominated by NO_x–N. Therefore, NH_x–N is the dominant N form deposited in the Guiyang area, which is supported by higher NH_x–N than NO_x–N in local atmospheric deposition. From the data showing that moss is responding to NH_x–N/NO_x–N in deposition it can be further demonstrated that the variation of moss δ¹⁵N from the Guiyang urban to rural area was more likely controlled by the ratio of urban-NH_x/agriculture-NH_x than the ratio of NH_x–N/NO_x–N. The results of this study have extended knowledge of atmospheric N sources in city areas, showing that urban sewage discharge could be important in cities co-generic to Guiyang.     

Abundance of mass 47 CO2 in urban air, car exhaust, and human breath

Atmospheric carbon dioxide is widely studied using records of CO₂ mixing ratio, δ¹³C and δ¹⁸O. However, the number and variability of sources and sinks prevents these alone from uniquely defining the budget. Carbon dioxide having a mass of 47 u (principally ¹³C¹⁸O¹⁶O) provides an additional constraint. In particular, the mass 47 anomaly (Δ₄₇) can distinguish between CO₂ produced by high temperature combustion processes vs. low temperature respiratory processes. Δ₄₇ is defined as the abundance of mass 47 isotopologues in excess of that expected for a random distribution of isotopes, where random distribution means that the abundance of an isotopologue is the product of abundances of the isotopes it is composed of and is calculated based on the measured ¹³C and ¹⁸O values. In this study, we estimate the δ¹³C (vs. VPDB), δ¹⁸O (vs. VSMOW), δ47, and Δ₄₇ values of CO₂ from car exhaust and from human breath, by constructing ‘Keeling plots’ using samples that are mixtures of ambient air and CO₂ from these sources. δ47 is defined as , where is the R⁴⁷ value for a hypothetical CO₂ whose δ¹³C_VPDB = 0, δ¹⁸O_VSMOW = 0, and Δ₄₇ = 0. Ambient air in Pasadena, CA, where this study was conducted, varied in [CO₂] from 383 to 404 μmol mol⁻¹, in δ¹³C and δ¹⁸O from −9.2 to −10.2‰ and from 40.6 to 41.9‰, respectively, in δ47 from 32.5 to 33.9‰, and in Δ₄₇ from 0.73 to 0.96‰. Air sampled at varying distances from a car exhaust pipe was enriched in a combustion source having a composition, as determined by a ‘Keeling plot’ intercept, of −24.4 ± 0.2‰ for δ¹³C (similar to the δ¹³C of local gasoline), δ¹⁸O of 29.9 ± 0.4‰, δ47 of 6.6 ± 0.6‰, and Δ₄₇ of 0.41 ± 0.03‰. Both δ¹⁸O and Δ₄₇ values of the car exhaust end-member are consistent with that expected for thermodynamic equilibrium at∼200 °C between CO₂ and water generated by combustion of gasoline-air mixtures. Samples of CO₂ from human breath were found to have δ¹³C and δ¹⁸O values broadly similar to those of car exhaust-air mixtures, −22.3 ± 0.2 and 34.3 ± 0.3‰, respectively, and δ47 of 13.4 ± 0.4‰. Δ₄₇ in human breath was 0.76  ± 0.03‰, similar to that of ambient Pasadena air and higher than that of the car exhaust signature.     

Low temperature volatile production at the Lost City Hydrothermal Field, evidence from a hydrogen stable isotope geothermometer

Although commonly utilized in continental geothermal work, the water-hydrogen and methane-hydrogen isotope geothermometers have been neglected in hydrothermal studies. Here we report δD-CH₄ and δD-H₂ values from high-temperature, black smoker-type hydrothermal vents and low-temperature carbonate-hosted samples from the recently discovered Lost City Hydrothermal Field. Methane deuterium content is uniform across the dataset at − 120 ± 12‰. Hydrogen δD values vary from − 420‰ to − 330‰ at high-temperature vents to − 700‰ to − 600‰ at Lost City. The application of several geothermometer equations to a suite of hydrothermal vent volatile samples reveals that predicted temperatures are similar to measured vent temperatures at high-temperature vents, and 20-60 °C higher than those measured at the Lost City vents. We conclude that the overestimation of temperature at Lost City reflects 1) that methane and hydrogen are produced by serpentinization at > 110 °C, and 2) that isotopic equilibrium at temperatures < 70 °C is mediated by microbial sulfate reduction. The successful application of hydrogen isotope geothermometers to low-temperature Lost City hydrothermal samples encourages its employment with low-temperature diffuse hydrothermal fluids.     

Optically continuous silcrete quartz cements of the St. Peter Sandstone: High precision oxygen isotope analysis by ion microprobe

A detailed oxygen isotope study of detrital quartz and authigenic quartz overgrowths from shallowly buried (<1 km) quartz arenites of the St. Peter Sandstone (in SW Wisconsin) constrains temperature and fluid sources during diagenesis. Quartz overgrowths are syntaxial (optically continuous) and show complex luminescent zonation by cathodoluminescence. Detrital quartz grains were separated from 53 rocks and analyzed for oxygen isotope ratio by laser fluorination, resulting in an average δ¹⁸O of 10.0 ± 0.2‰ (1SD, n = 109). Twelve thin sections were analyzed by CAMECA-1280 ion microprobe (6-10 μm spot size, analytical precision better than ±0.2‰, 1SD). Detrital quartz grains have an average δ¹⁸O of 10.0 ± 1.4‰ (1SD, n = 91) identical to the data obtained by laser fluorination. The ion microprobe data reveal true variability that is otherwise lost by homogenization of powdered samples necessary for laser fluorination. Laser fluorination uses samples that are one million times larger than the ion microprobe. Whole rock (WR) samples from the 53 rocks were analyzed by laser fluorination, giving δ¹⁸O between 9.8‰ and 16.7‰ (n = 110). Quartz overgrowths in thin sections from 10 rocks were analyzed by ion microprobe and average δ¹⁸O = 29.3 ± 1.0‰ (1SD, n = 161).Given the similarity, on average, of δ¹⁸O for all detrital quartz grains and for all quartz overgrowths, samples with higher δ¹⁸O(WR) values can be shown to have more cement. The quartz cement in the 53 rocks, calculated by mass balance, varies from <1 to 21 vol.% cement, with one outlier at 33 vol.% cement. Eolian samples have an average of 11% cement compared to marine samples, which average 4% cement.Two models for quartz cementation have been investigated: high temperature (50-110 °C) formation from ore-forming brines related to Mississippi Valley Type (MVT) mineralization and formation as silcretes at low temperature (10-30 °C). The homogeneity of δ¹⁸O for quartz overgrowths determined by ion microprobe rules out a systematic regional variation of temperature as predicted for MVT brines and there are no other known heating events in these sediments that were never buried to depths >1 km. The data in this study suggest that quartz overgrowths formed as silcretes in the St. Peter Sandstone from meteoric water with δ¹⁸O values of −10‰ to −5‰ at 10-30 °C. This interpretation runs counter to conventional wisdom based on fibrous or opaline silica cements suggesting that the formation of syntaxial quartz overgrowths requires higher temperatures. While metastable silica cements commonly form at high degrees of silica oversaturation following rapid break-down reactions of materials such as of feldspars or glass, the weathering of a clean quartz arenite is slower facilitating chemical equilibrium and precipitation of crystallographically oriented overgrowths of α-quartz.     

Mg isotope constraints on soil pore-fluid chemistry: Evidence from Santa Cruz, California

Mg isotope ratios (²⁶Mg/²⁴Mg) are reported in soil pore-fluids, rain and seawater, grass and smectite from a 90 kyr old soil, developed on an uplifted marine terrace from Santa Cruz, California. Rain water has an invariant ²⁶Mg/²⁴Mg ratio (expressed as δ²⁶Mg) at −0.79 ± 0.05‰, identical to seawater δ²⁶Mg. Detrital smectite (from the base of the soil profile, and therefore unweathered) has a δ²⁶Mg value of 0.11‰, potentially enriched in ²⁶Mg by up to 0.3‰ compared to the bulk silicate Earth Mg isotope composition (although within the range of all terrestrial silicates). The soil pore-waters show a continuous profile with depth for δ²⁶Mg, ranging from −0.99‰ near the surface to −0.43‰ at the base of the profile. Shallow pore-waters (<1 m) have δ²⁶Mg values that are similar to, or slightly lower than the rain waters. This implies that the degree of biological cycling of Mg in the pore-waters is relatively small and is quantified as <32%, calculated using the average Mg isotope enrichment factor between grass and rain (δ²⁶Mg_grass-δ²⁶Mg_rain) of 0.21‰. The deep pore-waters (1-15 m deep) have δ²⁶Mg values that are intermediate between the smectite and rain, ranging from −0.76‰ to −0.43‰, and show a similar trend with depth compared to Sr isotope ratios. The similarity between Sr and Mg isotope ratios confirms that the Mg in the pore-waters can be explained by a mixture between rain and smectite derived Mg, despite the fact that Mg and Sr concentrations may be buffered by the exchangeable reservoir. However, whilst Sr isotope ratios in the pore-waters span almost the complete range between mineral and rain inputs, Mg isotopes compositions are much closer to the rain inputs. If Mg and Sr isotope ratios are controlled uniquely by a mixture, the data can be used to estimate the mineral weathering inputs to the pore-waters, by correcting for the rain inputs. This isotopic correction is compared to the commonly used chloride correction for precipitation inputs. A consistent interpretation is only possible if Mg isotope ratios are fractionated either by the precipitation of a secondary Mg bearing phase, not detected by conventional methods, or selective leaching of ²⁴Mg from smectite. There is therefore dual control on the Mg isotopic composition of the pore-waters, mixing of two inputs with distinct isotopic compositions, modified by fractionation. The data provide (1) further evidence for Mg isotope fractionation at the surface of the Earth and (2) the first field evidence of Mg isotope fractionation during uptake by natural plants. The coherent behaviour of Mg isotope ratios in soil environments is encouraging for the development of Mg isotope ratios as a quantitative tracer of both weathering inputs of Mg to waters, and the physicochemical processes that cycle Mg, a major cation linked to the carbon cycle, during continental weathering.     

Silicon isotopes in the inner Solar System: Implications for core formation, solar nebular processes and partial melting

We report Si isotopic data on a suite of terrestrial mantle-derived samples, meteorites and a lunar sample. Our data on co-existing mantle minerals, peridotites and basalts demonstrate lack of any resolvable high temperature fractionation during igneous processes. We show that the δ³⁰Si of the bulk silicate Earth (BSE) is identical, within analytical uncertainties, to carbonaceous and ordinary chondrites (CHUR). Based on our data the difference between δ³⁰Si_BSE and δ³⁰Si_CHUR is 0.035 ± 0.035. Whole-rock differentiated meteorites from different parent bodies (Mars, Vesta) and a lunar breccia sample also show similar δ³⁰Si suggesting broad-scale Si isotope homogeneity in the inner Solar System with an average δ²⁹Si = −0.20 ± 0.01 and δ³⁰Si = −0.39 ± 0.02 relative to the NBS28 Si isotope standard.A difference between δ³⁰Si_BSE and δ³⁰Si_CHUR of 0.035, as observed in our study, translates to less than 1.67 wt.% Si in the core considering a continuous accretion model whereas estimates using a batch model are even lower. Within uncertainties (±0.035‰) in the δ³⁰Si difference between the BSE and CHUR, a maximum of 3.84 wt.% Si could be present in the Earth’s core whereas at δ³⁰Si_BSE-δ³⁰Si_CHUR = 0, there is no requirement of Si in the Earth’s core. Such low Si in the core necessitates the presence of other light elements in the core to explain its density deficit. Our data also places constraints on the oxidation state of the Earth’s mantle during core segregation. The uncertainties in estimating the concentration of oxidized Fe in the mantle during the first 90% of accretion arise from uncertainties in the estimates of the equilibrium partition coefficient of silicon between metal and silicate at conditions relevant to core formation. For δ³⁰Si_BSE-δ³⁰Si_CHUR = 0.035 ± 0.035, the concentration of oxidized Fe in the mantle during the first 90% of accretion could be as low as ∼1%. However, at δ³⁰Si_BSE-δ³⁰Si_CHUR = 0, the Si isotope data do not require any change in the mantle concentration of oxidized Fe during accretion from the present day value of 6.26%.     

Silicon isotope fractionation between rice plants and nutrient solution and its significance to the study of the silicon cycle

The silicon isotope fractionation between rice plant and nutrient solution was studied experimentally. Rice plants were grown to maturity with the hydroponic culture in a naturally lit glasshouse. The nutrient solution was sampled for 14 times during the whole rice growth period. The rice plants were collected at various growth stages and different parts of the plants were sampled separately. The silica contents of the samples were determined by the gravimetric method and the silicon isotope compositions were measured using the SiF₄ method.In the growth process, the silicon content in the nutrient solution decreased gradually from 16 mM at starting stage to 0.1-0.2 mM at harvest and the amount of silica in single rice plant increased gradually from 0.00013 g at start to 4.329 g at harvest. Within rice plant the SiO₂ fraction in roots reduced continuously from 0.23 at the seedling stage, through 0.12 at the tiller stage, 0.05 at the jointing stage, 0.023 at the heading stage, to 0.009 at the maturity stage. Accordingly, the fraction of SiO₂ in aerial parts increased from 0.77, through 0.88, 0.95, 0.977, to 0.991 for the same stages. The silicon content in roots decreased from the jointing stage, through the heading stage, to the maturity stage, parallel to the decrease of silicon content in the nutrient solution. At the maturity stage, the silicon content increased from roots, through stem and leaves, to husks, but decreased drastically from husks to grains. These observations show that transpiration and evaporation may play an important role in silica transportation and precipitation within rice plants.It was observed that the δ³⁰Si of the nutrient solution increased gradually from −0.1‰ at start to 1.5‰ at harvest, and the δ³⁰Si of silicon absorbed by bulk rice plant increased gradually from −1.72‰ at start to −0.08‰ at harvest, reflecting the effect of the kinetic silicon isotope fractionation during silicon absorption by rice plants from nutrient solutions. The calculated silicon isotope fractionation factor between the silicon instantaneously absorbed by rice roots and the silicon in nutrient solution vary from 0.9983 at start to 0.9995 at harvest, similar to those reported for bamboo, banana and diatoms in direction and extent. In the maturity stage, the δ³⁰Si value of rice organs decreased from −1.33‰ in roots to −1.98‰ in stem, and then increased through −0.16‰ in leaves and 1.24‰ in husks, to 2.21‰ in grains. This trend is similar to those observed in the field grown rice and bamboo.These quantitative data provide us a solid base for understanding the mechanisms of silicon absorption, transportation and precipitation in rice plants and the role of rice growth in the continental Si cycle.     

Exploration potential of Cu isotope fractionation in porphyry copper deposits

We examined the copper isotope ratio of primary high temperature Cu-sulfides, secondary low temperature Cu-sulfides (and Cu-oxides) as well as Fe-oxides in the leach cap, which represent the weathered remains of a spectrum of Cu mineralization, from nine porphyry copper deposits. Copper isotope ratios are reported as δ⁶⁵Cu‰ = ((⁶⁵Cu/⁶³Cu_sample/⁶⁵Cu/⁶³Cu_{NIST 976 standard}) − 1) ? 10³. Errors for all the analyses are ± 0.14‰ (determined by multiple analyses of the samples) and mass bias was corrected through standard-sample-standard bracketing. The overall isotopic variability measured in these samples range from − 16.96‰ to 9.98‰.