Mine Burial Experiments at the Martha's Vineyard Coastal Observatory

Several experiments to measure postimpact burial of seafloor mines by scour and fill have been conducted near the Woods Hole Oceanographic Institution's Martha's Vineyard Coastal Observatory (MVCO, Edgartown, MA). The sedimentary environment at MVCO consists of a series of rippled scour depressions (RSDs), which are large scale bedforms with alternating areas of coarse and fine sand. This allows simultaneous mine burial experiments in both coarse and fine sand under almost identical hydrodynamic forcing conditions. Two preliminary sets of mine scour burial experiments were conducted during winters 2001-2002 in fine sand and 2002-2003 in coarse sand with a single optically instrumented mine in the field of view of a rotary sidescan sonar. From October 2003 to April of 2004, ten instrumented mines were deployed along with several sonar systems to image mine behavior and to characterize bedform and oceanographic processes. In fine sand, the sonar imagery of the mines revealed that large scour pits form around the mines during energetic wave events. Mines fell into their own scour pits, aligned with the dominant wave crests and became level with the ambient seafloor after several energetic wave events. In quiescent periods, after the energetic wave events, the scour pits episodically infilled with mud. After several scour and infilling events, the scour pits were completely filled and a layer of fine sand covered both the mines and the scour pits, leaving no visible evidence of the mines. In the coarse sand, mines were observed to bury until the exposed height above the ripple crests was approximately the same as the large wave orbital ripple height (wavelengths of 50-125 cm and heights of 10-20 cm). A hypothesis for the physical mechanism responsible for this partial burial in the presence of large bedforms is that the mines bury until they present roughly the same hydrodynamic roughness as the orbital-scale bedforms present in coarse sand.     

Predicting Seabed Burial of Cylinders by Wave-Induced Scour: Application to the Sandy Inner Shelf Off Florida and Massachusetts

A simple parameterized model for wave-induced burial of mine-like cylinders as a function of grain-size, time-varying, wave orbital velocity and mine diameter was implemented and assessed against results from inert instrumented mines placed off the Indian Rocks Beach (IRB, FL), and off the Martha's vineyard coastal observatory (MVCO, Edgartown, MA). The steady flow scour parameters provided by Whitehouse (1998) for self-settling cylinders worked well for predicting burial by depth below the ambient seabed for (0.5 m) diameter mines in fine sand at both sites. By including or excluding scour pit infilling, a range of percent burial by surface area was predicted that was also consistent with observations. Rapid scour pit infilling was often seen at MVCO but never at IRB, suggesting that the environmental presence of fine sediment plays a key role in promoting infilling. Overprediction of mine scour in coarse sand was corrected by assuming a mine within a field of large ripples buries only until it generates no more turbulence than that produced by surrounding bedforms. The feasibility of using a regional wave model to predict mine burial in both hindcast and real-time forecast mode was tested using the National Oceanic and Atmospheric Administration (NOAA, Washington, DC) WaveWatch 3 (WW3) model. Hindcast waves were adequate for useful operational forcing of mine burial predictions, but five-day wave forecasts introduced large errors. This investigation was part of a larger effort to develop simple yet reliable predictions of mine burial suitable for addressing the operational needs of the U.S. Navy.     

Multibeam Observations of Mine Burial Near Clearwater, FL, Including Comparisons to Predictions of Wave-Induced Burial

A Kongsberg Simrad EM 3000 multibeam sonar (Kongsberg Simrad, Kongsberg, Norway) was used to conduct a set of six repeat high-resolution bathymetric surveys west of Indian Rocks Beach (IRB), just to the south of Clearwater, FL, between January and March 2003, to observe in situ scour and burial of instrumented inert mines and mine-like cylinders. Three closely located study sites were chosen: two fine-sand sites, a shallow one located in 13 m of water depth and a deep site located in 14 m of water depth; and a coarse-sand site in 13 m. Results from these surveys indicate that mines deployed in fine sand are nearly buried within two months of deployment (i.e., they sunk 74.5% or more below the ambient seafloor depth). Mines deployed in coarse sand showed a lesser amount of scour, burying until they present roughly the same hydrodynamic roughness as the surrounding rippled bedforms. These data were also used to test the validity of the Virginia Institute of Marine Science (VIMS, Gloucester Point, VA) 2-D burial model. The model worked well in areas of fine sand, sufficiently predicting burial over the course of the experiment. In the area of coarse sand, the model greatly overpredicted the amount of burial. This is believed to be due to the presence of rippled bedforms around the mines, which affect local bottom morphodynamics and are not accounted for in the model, an issue currently being addressed by the modelers. This paper focuses specifically on two instrumented mines: an acoustic mine located in fine sand and an optical instrumented mine located in coarse sand.     

Deterministic and Stochastic Predictions of Motion Dynamics of Cylindrical Mines Falling Through Water

A physics-based computational model has been developed that is capable of reliably predicting the motion of a 3-D mine-shaped object impacting the water surface from the air, and subsequently, dropping through the water toward the sea bottom. This deterministic model [mine's six-degree-of-freedom dynamics (MINE6D)] accounts for six-degree-of-freedom motions of the body including unsteady hydrodynamic interaction effects. MINE6D allows for physics-based modeling of other hydrodynamic effects due to water impact, viscous drag associated with flow separation and vortex shedding, air entrainment, and realistic flow environments. To demonstrate the efficacy of the model, we compare deterministic MINE6D predictions with tank drops tests and field measurements. MINE6D captures the myriad of complex 3-D motions of cylindrical mines observed in field and laboratory experiments. For relatively simple straight motions, it obtains quantitative comparisons with the field measurements for the kinematics of mines freely dropping in the water including water impact and air cavity effects. In practical applications, the environments are often quite irregular, and the releasing conditions are also with uncertainties. To provide some guidance in understanding and interpreting statistical characterizations of mine motions in practical environments, we perform Monte Carlo simulation using MINE6D. These statistical results are not only the essential input for stochastic bottom impact and burial predictions of mines but also useful for the design of mines.     

Full-Scale Mine Burial Experiments in Wave and Current Environments and Comparison With Models

A mine burial field experiment was carried out on two sandy seafloors between January and April 2004 in the Bay of Brest, France. Burial recording mines (BRMs) were used to measure burial and mine orientation at 15-min intervals. Sonar and bottom photographs were also used to characterize sediment morphology and mine burial. These observations are compared with the predictions of mine burial using the following three models: a momentary liquefaction model, a current-induced scour model, and a wave-induced scour model. Analysis combines mine burial data, sediment data, seabed observations, and hydrodynamic measurements. At the first site, ldquoRascas,rdquo the seabed dynamics are dominated by tides and river runoff. Almost no mine burial was measured during the experiment which is in agreement with predictions of mine burial models (current-induced scour and liquefaction). Dynamics at the second site, ldquoBertheaume,rdquo are driven by tides and ocean waves. A long storm (one week) and several swell events were experienced and significant mine burial was observed in conjunction with high significant waveheights. Mine burial models suggest that burial at ldquoBertheaumerdquo was dominated by wave-induced scour rather than current-induced scour or momentary liquefaction.     

Guest Editorial Special Issue on Mine Burial Processes

The 23 papers in this special issue focus on mine burial processes. The special issues begins with the guest editors providing a short history and introduction, followed by five papers that describe field and laboratory experiments, models, and sediment strength measurement related to mine burial by impact. The next nine papers describe instrumentation, field measurements, and modeling of mine burial by wave-induced scour. The next three papers describe laboratory experiments, simulations, and modeling of wave- and current induced scour, followed by three papers relating measurements, simulations, and modeling of sediment transport. The last two papers describe and provide examples of probabilistic MBPs systems intended for operational use.     

Mine Burial Observations During the 2003–2004 U.S. Office of Naval Research Experiment

During the 2003-2004 winter season, the U.S. Office of Naval Research (ONR, Arlington, VA), sponsored a detailed in situ study of the mine burial process resulting from wave-seafloor-mine interaction at Martha's Vineyard Coastal Observatory (MVCO, Edgartown, MA). In total, 16 mine shapes were deployed. Six were the Forschungsanstalt der Bundeswehr fur Wasserschall und Geophysik (FWG, Kiel, Germany) burial registration mines using optical sensors, four others were equipped with acoustical sensors, and six were simple shapes. Repeated acoustic surveys and detailed sediment sampling were conducted to characterize the site and the burial status of all objects. This paper focuses on data from three recovered optical systems. The records show three roll events at all three registration mines, which are necessary for scour burial. Two systems experienced a fourth roll event. Results from earlier experiments suggest only three (four) stages of progressively increasing burial despite frequent successive burial and exposure cycles (some as short as 1 h). During these burial-exposure cycles changes of buried mine volume reached up to 80%. The only reasonable explanation is a change of sediment height of up to 40 cm relative to the stably lying mines. This requires new concepts. Cyclic burial changes that were observed simultaneously at different positions cannot be explained with existing models. The least difficult explanation is ldquounderwater sand stormsrdquo which are characterized by a high sediment suspension.     

Scour and Burial Mechanics of Objects in the Nearshore

A process-based, numerical, hydrodynamic vortex lattice mine scour/burial model (VORTEX) is presented that simulates scour and burial of objects of arbitrary shape resting on a granular bed in the nearshore. There are two domains in the model formulation: a far-field where burial and exposure occur due to changes in the elevation of the seabed and a near-field involving scour and transport of sediment by the vortices shed from the object. The far-field burial mechanisms are based on changes in the equilibrium bottom profiles in response to seasonal changes in wave climate and accretion/erosion waves spawned by fluxes of sediment into the littoral cell. The near-field domain consists of one grid cell extracted from the far-field that is subdivided into a rectangular lattice of panels having sufficient resolution to define the shape of the object. The vortex field induced by the object is constructed from an assemblage of horseshoe vortices excited by local pressure gradients and shear over the lattice panels. The horseshoe vortices of each lattice panel release a pair of vortex filaments into the neighboring flow. The induced velocity of these trailing vortex filaments causes scour of the neighboring seabed and induces hydrodynamic forces on the object. Scour around the object and its subsequent movement into the scour depression contribute to burial, while far-field changes in local sand level may increase burial depth or expose the object. Scour and burial predictions of mines and mine-like objects were tested in field experiments conducted in the nearshore waters off the Pacific coast of California at Scripps Pier, the Gulf Coast of Florida at Indian Rocks, and off the Atlantic coast of Massachusetts at Martha's Vineyard. Model predictions of mine scour and burial are in reasonable agreement with field measurements and underwater photographs.     

Burial and scour around short cylinder under progressive shoaling waves

The results of a laboratory experimental program aimed at better understanding the scour around and burial of heavy cylindrical objects under oscillating flow on a sandy bed are described. This study was motivated by its application to the dynamics of isolated cobbles/mines on a sandy floor under nonlinear progressive waves, such as that occur in shallow coastal waters beyond the wave-breaking region. In the experiments, nonlinear progressive waves were generated in a long wave tank of rectangular cross-section with a bottom slope. Model mines (short cylinders) were placed on the sandy bottom and the temporal evolution of the bed profile and the velocity field in the near field of the object were observed. Experiments were conducted at relatively high Reynolds numbers for a range of flow conditions, which can be characterized by the Keulegan–Carpenter number and Shields parameter. Depending on the values of these parameters, four different scour regimes around the cylinder including periodical burial of cylinder under migrating sand ripples were observed; they were classified as: (i) no scour/burial, (ii) initial scour, (iii) expanded scour, and (iv) periodic burial cases. A scour regime diagram was developed and the demarcation criteria between different regimes were deduced. Semi-empirical formulae that permit estimation of the scour depth with time, the equilibrium maximum scour depth and length, and conditions necessary for the burial of the cylinder as a function of main external parameters are also proposed.     

An Acoustic-Instrumented Mine for Studying Subsequent Burial

The U.S. Navy is supporting the research to develop and validate stochastic, time-dependent, mine burial prediction models to aid the tactical decision making process. This research requires continuous monitoring of both mine behavior during burial, and the near-field processes responsible for burial. A new instrumented mine has been developed that far exceeds the capabilities of the earlier optically instrumented mine in terms of the burial processes that can be measured. The acoustic-instrumented mine (AIM) utilizes acoustic transducers to measure burial and scour, localized flow rates, and sediment size and concentration in the water column. The AIM also includes sensors for measuring mine orientation and movement, as well as oceanographic information such as significant waveheights, wave period, and water temperature. Four AIMs were constructed and deployed during the Indian Rocks Beach (IRB, FL) and Martha's Vineyard Coastal Observatory (MVCO, Edgartown, MA) mine burial experiments. The results from the field experiments have proven that the sensor suite is viable in providing a wealth of data that are critical in understanding and modeling the complex subsequent burial process.     

Measured and Predicted Burial of Cylinders During the Indian Rocks Beach Experiment

Burial of instrumented mine-like cylinders as a result of wave-induced scour was measured during experiments conducted in shallow water (15-16 m) with fine-sand (133-mum) and coarse-sand (566-mum) sediments off Indian rocks beach (IRB), FL. scour pits developed around the instrumented cylinders in the fine-sand site when significant waveheights exceeded 2 m, causing the cylinders to pitch, then roll into the developing scour pits, often changing heading to align parallel with the wave crest. Final cylinder burial was nearly 40 cm (about 70%-80% mine diameter) relative to the sediment-water interface, but only 20%-50% relative to surface area covered. The difference was caused by the lack of complete infilling of scour pits. Little development of scour pits and burial was noted on the coarse-sand site and the cylinders buried to only 20%-40% of the cylinder diameter below the sediment surface. Burial results, although variable, are in general agreement with the wave-induced scour model developed by Trembanis et al. (2007) for the fine sand, but not for the coarse sand where measured burial was much less than predicted.     

Naval Mine Impact Burial Prediction using Seafloor Database, Experiment, and GIS Technologies

The possibility of naval mines buried in the seafloor poses difficulties for navies concerned with port and seaway operations. To devise countermeasures, predictions of degrees of impact burial over wide areas of seabed must be made. Under ideal conditions, this is done with a knowledge of local seabed shear strengths, but in practice, such data are rarely available.

We describe an alternative prediction method. Probabilistic predictions of mine impact burial are made across areas of variable seafloor by combining data on sedimentary character directly with experimental impact burial results. The most useful seafloor characteristics are mud content and consolidation. The predictions are relatively accurate (SD 1-22%), and are computable in detail over wide geographic areas. They are of a form immediately useful for naval operations (including calculations of risk) and are easily displayed in geographic information systems (GIS). An example is shown for the northern Gulf of Mexico.     

Naval Mine Impact Burial Prediction using Seafloor Database,Experiment, and GIS Technologies

The possibility of naval mines buried in the seafloor poses difficulties for navies concerned with port and seaway operations. To devise countermeasures, predictions of degrees of impact burial over wide areas of seabed must be made. Under ideal conditions, this is done with a knowledge of local seabed shear strengths, but in practice, such data are rarely available.

We describe an alternative prediction method. Probabilistic predictions of mine impact burial are made across areas of variable seafloor by combining data on sedimentary character directly with experimental impact burial results. The most useful seafloor characteristics are mud content and consolidation. The predictions are relatively accurate (SD 1–22%), and are computable in detail over wide geographic areas. They are of a form immediately useful for naval operations (including calculations of risk) and are easily displayed in geographic information systems (GIS). An example is shown for the northern Gulf of Mexico.     

Measurement of scour in cohesive soils around a vertical pile - simplified instrumentation and regression analysis

The flow-structure interaction in an ocean environment, for a pile placed in an erodible bed where currents and waves are of prime concern, changes the bed elevation due to scour in the vicinity of the obstruction. There are certain difficulties in predicting the scour depth, as the particulate movement of sediments due to scour is time-dependent. Considering the complexity of the problem, an instrumentation system has been developed for measuring scour depth with time. This paper outlines the experimental laboratory techniques used to measure scour around pile foundations in silty-clay sediments. Detailed laboratory testing on model piles having a diameter of 50-110 mm was carried out in a wave flume having a length of 30 m and a width of 2.0 m. The motivation of these studies is to obtain observational experience of scour rate in silty-clay soil. Scour depths were monitored continuously for different combinations of wave characteristics and current velocities, and scour-time history is measured. Based on the measurements, a relationship for the scour depth in terms of duration of flow, soil properties, model characteristics, and fluid parameters is presented.     

Morphodynamics and cobbles behavior in and near the surf zone

The evolution of an initially flat sandy slope and the dynamics of large objects (cobbles/mines) emplaced on it are studied in a laboratory wave tank under simulated surf conditions. Upon initiation of wave forcing, the initially flat beach undergoes bedform changes before reaching a quasi-steady morphology characterized by a system of sand ripples along the slope and a large bar near the break point. Although the incoming wave characteristics are held fixed, the bottom morphology never reaches a strict steady state, but rather slowly changes due to the migration of ripples and bar transformation. When the wave characteristics are changed, the bedform adjusts to a new quasi-steady state after a suitable adjustment time. Studies conducted by placing model cobbles/mines on the evolving sandy bottom subjected to wave forcing show four distinct scenarios: (i) periodic cobble oscillations with zero mean displacement and small scour around the cobbles, (ii) mean onshore motion of relatively light cobbles, (iii) periodic burial of relatively heavy cobbles when their sizes are comparable to those of sand ripples, and (iv) the burial of relatively large cobbles under the bar, when the bar migrates due to changes of incoming waves. Quantitative data on the characteristics and dynamics of the bedform, including ripple-formation front propagating down the slope, ripple growth and drift, and flow around ripples, are presented. Physical explanations are provided for the observations.     

推进波作用下海底管线周围局部冲刷试验研究

考虑行波作用下的海底管线的局部冲刷问题。采用波浪水槽模型试验的方法,研究波浪荷载引起的管线周围局部冲刷机理和冲刷形态,探讨行波作用下管线周围局部冲刷的演化规律,包括冲刷起动、水土界面沙波的形成以及平衡冲刷深度与KC数(keulegan-carpenter number)和相对埋置深度的关系。     

Numerical Simulations of the Flow and Sediment Transport Regimes Surrounding a Short Cylinder

The 3-D flow field and bed stress surrounding a short cylinder in response to combined wave and mean-flow forcing events is examined. Model simulations are performed with a 3-D nonhydrostatic computational fluid dynamics model, FLOW-3D. The model is forced with a range of characteristic tidal and wave velocities as observed in 12-15 m of water at the Martha's Vineyard Coastal Observatory (MVCO, Edgartown, MA). The 2.4-m-long and 0.5-m diameter cylinder is buried 10% of the diameter on a flat, fixed bed. Regions of incipient motion are identified through local estimates of the Shields parameter exceeding the critical value. Potential areas of sediment deposition are identified with local estimates of the Rouse parameter exceeding ten. The model predictions of sediment response are in general in agreement with field observations of seabed morphology obtained over a one-week period during the 2003-2004 MVCO mine burial experiment. Both observations and simulations show potential transport occurring at the ends of the mine in wave-dominated events. Mean flows greater than 10 cm/s lead to the formation of larger scour pits upstream of the cylinder. Deposition in both cases tends to occur along the sides, near the center of mass of the mine. However, the fixed-bed assumption prohibits the prediction of full perimeter scour as is observed in nature. Predicted scour and burial regimes for a range of wave and mean-flow combinations are established.     

Self-Burial of Short Cylinders Under Oscillatory Flows and Combined Waves Plus Currents

Self-burial processes of finite-length cylinders under oscillatory flows and waves plus currents were examined with the following two different experimental facilities: a large oscillating water-sediment tunnel (LOWST) and a large wave-current tank. More than 130 experiments, with different model cylinders, were conducted within both facilities. The burial mechanisms studied include burial due to local scour and bedform migration. Burial due to fluidization in the tunnel was also explored, but only in a qualitative way. In the case of experiments with LOWST, the equilibrium burial depth was found to be a power function of the shields parameter (thetas). In the wave-current tank, the equilibrium burial depth was also found to be a function of the Shields parameter, albeit with larger scatter. The experimental observations made in both facilities have similar trends but different magnitudes. For equivalent values of the Shields parameter, smaller equilibrium burial depths were observed in the wave flume when compared to the ones in LOWST. After burial induced by local scour takes place, bedform (ripples and sandwaves) formation and evolution play a strong and, in some cases, dominant role on the equilibrium burial depth of the cylinders. Depending on how the vertical dimensions of bedforms compare to the specimen's diameter, cyclical covering and uncovering of the object may take place due to the passage of the migrating sandwaves. In such case, burial depth B_d no longer coincides with the vertical displacement (V_d) of the object as in the case when the burial process is dominated by local scour.     

Mine Burial Prediction: A Short History and Introduction

Naval mines have been in use for over 200 years. They are a cheap and effective way to significantly affect naval operations. Bottom mines in shallow water are particularly difficult to find when they are partially or wholly buried. The U.S. Office of Naval Research (Arlington, VA) and the Naval Research Laboratory (Stennis Space Center, MS) sponsored a six-year-long program to upgrade the capability to predict mine burial. The program consisted of laboratory studies, computer modeling, and field observation programs. Results of the studies have been combined into stochastic predictive programs that utilize state of the art process models and incorporate uncertainty in model capability and in our ability to know the correct values of model inputs.