Impact of cyclonic wind field on interaction of surge–wave computations using finite-element and finite-difference models

Both finite-element and finite-difference numerical models are applied to simulate storm surges and associated currents generated by tropical cyclones that struck the coast of Andhra Pradesh, located on the east coast of India. During a cyclone, the total water level at any location on the coast is made up of the storm surge, surge–wind wave interaction and the tide. The advanced circulation two-dimensional depth-integrated (ADCIRC-2DDI) model based on finite-element formulation and the two-dimensional finite-difference model of storm surges developed at IIT Delhi, hereafter referred as IITD storm surge model, are used. These models are driven by astronomical tides at the open ocean boundary and cyclonic asymmetric winds over the surface of the computational domain. Comparison of model simulated sea-surface elevations with coarse and finer spatial resolutions suggests that the grid resolution near the coast is very crucial for accurate determination of the surges in addition to the local bathymetry. The model underpredicts surges, and the peak surge location shifts more to the right of the landfall as the spatial resolution of the model becomes coarser. The numerical experiments also demonstrate that the ADCIRC model is robust over the IITD storm surge model for surge computations as the coastline is better represented in the former.     

Hydrodynamic Response of Northeastern Gulf of Mexico to Hurricanes

The northeastern Gulf of Mexico in the USA is extremely susceptible to the impacts of tropical cyclones because of its unique geometric and topographic features. Focusing on Hurricanes Ivan (2004) and Katrina (2005), this paper has addressed four scientific questions on this area’s response to hurricanes: (1) How does the shallow, abandoned Mississippi delta contribute to the storm surge? (2) What was the controlling factor that caused the record-high storm surge of Hurricane Katrina? (3) Why are the responses of an estuary to Hurricanes Ivan and Katrina so different from the corresponding surges on the open coast? (4) How would the storm surge differ if Hurricane Katrina had taken a different course? Guided by field observations of winds, waves, water levels, and currents, two state-of-the-art numerical models for storm surges and wind waves have been coupled to hindcast the relevant hydrodynamic conditions, including storm surges, surface waves, and depth-averaged currents. Fairly good agreement between the modeled and measured surge hydrographs was found. The quantitative numerical simulations and simple qualitative analysis have revealed that the record-high storm surge of Hurricane Katrina was caused by the interaction of the surge with the extremely shallow, ancient deltaic lobe of Mississippi River. A hypothetical scenario formed by shifting the path of Hurricane Katrina to the observed path of Hurricane Frederic (1979) resulted in a much smaller surge than that observed in coastal Mississippi and Louisiana. However, this scenario did still result in a high surge near the head of Mobile Bay. One of the important lessons learned from Hurricane Katrina is that the Saffir–Simpson scale should be systematically revised to reflect the topographic and geometric features of a complex, heterogeneous coast, including the possible surge amplification in an estuary or a submerged river delta.     

Simultaneous meteorological tsunamis and storm surges at Buenos Aires coast,southeastern South America

Meteorological tsunamis are frequently observed in different tide stations at the southeastern coast of South America. They are associated with the occurrence of atmospheric gravity waves during the passages of cold fronts over the Buenos Aires Province continental shelf. On the other hand, storm surges are also frequent in the region, and they are associated with strong and persistent southerlies, which are also frequent during cold front passages. The impact of meteorological tsunamis in coastal erosion and in the statistics of storm surge trends is discussed in this paper. For this study, fifteen meteorological tsunamis (with maximum wave heights higher than 0.20 m), seven of them simultaneous to the occurrence of storm surge events (with extreme levels higher than |±0.60 m|), are selected from April 2010 to January 2013. The impact of meteorological tsunamis in the storm erosion potential index (SEPI) is evaluated. Not significant differences are obtained between SEPI calculated with and without filtering the meteorological tsunami signal from the storm surge data series. Moreover, several experiments are carried out computing SEPI from synthetic sea level data series, but very low changes (lower than 4 %) are also obtained. It is concluded that the presence of moderate meteorological tsunamis on sea level records would not enhance this index at the Buenos Aires Province coast. On the other hand, taking into account that meteorological tsunamis can reach up the 20–30 % of the storm surge height, it was concluded that the statistics of storm surge trends (and their uncertainties) should be revised for Mar del Plata data series.     

Response of west Indian coastal regions and Kavaratti lagoon to the November-2009 tropical cyclone Phyan

Response of the coastal regions of eastern Arabian Sea (AS) and Kavaratti Island lagoon in the AS to the tropical cyclonic storm `Phyan??, which developed in winter in the south-eastern AS and swept northward along the eastern AS during 9?C12 November 2009 until its landfall at the northwest coast of India, is examined based on in situ and satellite-derived measurements. Wind was predominantly south/south-westerly and the maximum wind speed (U<sub>10</sub>) of ~16 m/s occurred at Kavaratti Island region followed by ~8 m/s at Dwarka (Gujarat) and ~7 m/s at Diu (located south of Dwarka) as well as two southwest Indian coastal locations (Mangalore and Malpe). All other west Indian coastal sites recorded maximum wind speed of ~5?C6 m/s. Gust factor (i.e., gust-to-speed ratio) during peak storm event was highly variable with respect to topography, with steep hilly stations (Karwar and Ratnagiri) and proximate thick and tall vegetation-rich site (Kochi) exhibiting large values (~6), whereas Island station (Kavaratti) exhibiting ~1 (indicating consistently steady wind). Rainfall in association with Phyan was temporally scattered, with the highest 24-h accumulated precipitation (~60 mm) at Karwar and ~45 mm at several other west Indian coastal sites. Impact of Phyan on the west Indian coastal regions was manifested in terms of intensified significant waves (~2.2 m at Karwar and Panaji), sea surface cooling (~5°C at Calicut), and moderate surge (~50 cm at Verem, Goa). The surface waves were south-westerly and the peak wave period (T <sub>p</sub>) shortened from ~10?C17 s to ~5?C10 s during Phyan, indicating their transition from the long-period `swell?? to the short-period `sea??. Reduction in the spread of the mean wave period (T _z) from ~5?C10 s to a steady period of ~6 s was another manifestation of the influence of the cyclone on the surface wave field. Several factors such as (1) water piling-up at the coast supported by south/south-westerly wind and seaward flow of the excess water in the rivers due to heavy rains, (2) reduction of piling-up at the coast, supported by the upstream penetration of seawater into the rivers, and (3) possible interaction of upstream flow with river run-off, together resulted in the observed moderate surge at the west Indian coast. Despite the intense wind forcing, Kavaratti Island lagoon experienced insignificantly weak surge (~7 cm) because of lack of river influx and absence of a sufficiently large land boundary required for the generation and sustenance of wave/wind-driven water mass piling-up at the land?Csea interface.     

Dynamic analysis of emergency inter-organizational communication network under public health emergency: a case study of COVID-19 in Hubei Province of China

Storm surge induced by hurricane is a major threat to the Gulf Coasts of the United States. A numerical modeling study was conducted to simulate the storm surge during Hurricane Michael, a category 5 hurricane that landed on the Florida Panhandle in 2018. A high-resolution model mesh was used in the ADCIRC hydrodynamic model to simulate storm surge and tides during the hurricane. Two parametric wind models, Holland 1980 model and Holland 2010 model, have been evaluated for their effects on the accuracy of storm surge modeling by comparing simulated and observed maximum water levels along the coast. The wind model parameters are determined by observed hurricane wind and pressure data. Results indicate that both Holland 1980 and Holland 2010 wind models produce reasonable accuracy in predicting maximum water level in Mexico Beach, with errors between 1 and 3.7%. Comparing to the observed peak water level of 4.74 m in Mexico Beach, Holland 1980 wind model with radius of 64-knot wind speed for parameter estimation results in the lowest error of 1%. For a given wind model, the wind profiles are also affected by the wind data used for parameter estimation. Away from hurricane eye wall, using radius of 64-knot wind speed for parameter estimation generally produces weaker wind than those using radius of 34-knot wind speed for parameter estimation. Comparing model simulated storm tides with 17 water marks observed along the coast, Holland 2010 wind model using radius of 34-knot wind speed for parameter estimation leads to the minimum mean absolute error. The results will provide a good reference for researchers to improve storm surge modeling. The validated model can be used to support coastal hazard mitigation planning.

     

Simulation of water levels and extent of coastal inundation due to a cyclonic storm along the east coast of India

The devastation due to storm surge flooding caused by extreme wind waves generated by the cyclones is a severe apprehension along the coastal regions of India. In order to coexist with nature’s destructive forces in any vulnerable coastal areas, numerical ocean models are considered today as an essential tool to predict the sea level rise and associated inland extent of flooding that could be generated by a cyclonic storm crossing any coastal stretch. For this purpose, the advanced 2D depth-integrated (ADCIRC-2DDI) circulation model based on finite-element formulation is configured for the simulation of surges and water levels along the east coast of India. The model is integrated using wind stress forcing, representative of 1989, 1996, and 2000 cyclones, which crossed different parts of the east coast of India. Using the long-term inventory of cyclone database, synthesized tracks are deduced for vulnerable coastal districts of Tamil Nadu. Return periods are also computed for the intensity and frequency of cyclones for each coastal district. Considering the importance of Kalpakkam region, extreme water levels are computed based on a 50-year return period data, for the generation of storm surges, induced water levels, and extent of inland inundation. Based on experimental evidence, it is advocated that this region could be inundated/affected by a storm with a threshold pressure drop of 66 hpa. Also it is noticed that the horizontal extent of inland inundation ranges between 1 and 1.5 km associated with the peak surge. Another severe cyclonic storm in Tamil Nadu (November 2000 cyclone), which made landfall approximately 20 km south of Cuddalore, has been chosen to simulate surges and water levels. Two severe cyclonic storms that hit Andhra coast during 1989 and 1996, which made landfall near Kavali and Kakinada, respectively, are also considered and computed run-up heights and associated water levels. The simulations exhibit a good agreement with available observations from the different sources on storm surges and associated inundation caused by these respective storms. It is believed that this study would help the coastal authorities to develop a short- and long-term disaster management, mitigation plan, and emergency response in the event of storm surge flooding.     

Storm Surge Hazard in Canada

Storm surges occur frequently in Canada mainlydue to extra-tropical cyclones (ETC'S) also referred to as winter storms. The hurricanes from the Gulf of Mexico can affect eastern Canada including Lakes Ontario and Erie regions, after they get modified and acquire some extra-tropical characteristics. Storm surges have occurred both on the Atlantic and Pacific coasts, in the Gulf of St.Lawrence, St.Lawrence Estuary, Bay of Fundy, Hudson Bay, James Bay, Northwest Passage, Beaufort Sea, the Great Lakes and other large lakes such as Lake Winnipeg.Squall lines which are embedded in the largerscale synoptic systems like the ETC'S could also generate storm surges (referred to as edge waves) in Lakes Huron, Erie and Ontario (edge waves are most prominent in Lake Michigan, but Canada has no territory touching this lake). The effect of climate change on storm surges in the Canadian water bodies could be two-fold. First, there may be some possible intensification of the weather systems and the associated wind fields resulting in bigger surges. Second, and probably even more relevant, is an east-west and north-south shift in the tracks of the weather systems, which could expose certain new areas to storm surge activity.A high priority for proper assessment of storm surge hazard is the production of maps showing inundation zones for storm surges that might occur in populated coastal areas. Such maps can be used to improve public awareness of tsunamis and for planning purposes (i.e., to reduce or avoid the risk).     

Dynamics of an outburst flood originating from a small and high-altitude glacier in the Arid Andes of Chile

The rise of total water levels at the coast is caused primarily by three factors that encompass storm surges, tides and wind waves. The accuracy of total water elevation (TWE) forecast depends not only on the cyclonic track and its intensity, but also on the spatial distribution of winds which include its speed and direction. In the present study, the cyclonic winds are validated using buoy winds for the recent cyclones formed in the Bay of Bengal since 2010 using Jelesnianski wind scheme. It is found that the cyclonic winds computed from the scheme show an underestimate in the magnitude and also a mismatch in its direction. Hence, the wind scheme is suitably modified based on the buoy observations available at different locations using a power law which reduces the exponential decay of winds by about 30%. Moreover, the cyclonic wind direction is also corrected by suitably modifying its inflow angle. The significance of modified exponential factor and inflow angle in the computation cyclonic winds is highlighted using statistical analysis. A hydrodynamic finite element-based Advanced Circulation 2D depth integrated (ADCIRC-2DDI) model is used here to compute TWE as a response to combined effect of cyclonic winds and astronomical tides. As contribution of wave setup plays an important role near the coast, a coupled ADCIRC + SWAN is used to perceive the contribution of wind waves on the TWE. The experiments are performed to validate computed surge residuals with available tide gauge data. On comparison of observed surge residuals with the simulations using modified winds from the uncoupled and coupled models, it is found that the simulated surge residuals are better compared, especially with the inclusion of wave effect through the coupled model.     

Future variability of droughts in three Mediterranean catchments

This study investigates the intensity change in typhoons and storm surges surrounding the Korean Peninsula under global warming conditions as obtained from the MPI_ECHAM5 climate model using the A1B series. The authors use the Cyclostationary Empirical Orthogonal Function to estimate future background fields for typhoon simulations from twenty-first-century prediction results. A series of numerical experiments applies WRF (Weather Research and Forecasting) and POM (Prinston Ocean Model) models to simulate two historical typhoons, Maemi (2003) and Rusa (2002), and associated storm surges under real historical and future warming conditions. Applying numerical experiments to two typhoons, this study found that their central pressure dropped about 19 and 17 hPa, respectively, when considering the future sea surface temperature (a warming of 3.9 °C for 100 years) over the East China Sea (Exp. 1). The associated enhancement of storm surge height ranged from 16 to 67 cm along the southern coast of the Korean Peninsula. However, when the study considered global warming conditions for other atmospheric variables such as sea-level pressure, air temperature, relative humidity, geopotential height, and wind in the typhoon simulations (Exp. 2), the intensities of the two typhoons and their associated surge heights scarcely increased compared to the results of Exp. 1. Analyzing projected atmospheric variables, the authors found that air temperatures at the top of the storm around 200 hPa increased more than those at the surface in tropical and mid-latitudes. The reduced vertical temperature difference provided an unfavorable condition in the typhoon’s development even under conditions of global warming. This suggests that global warming may not always correlate with a large increase in the number of intense cyclones and/or an increase in associated storm surges.     

Waves off Puducherry, Bay of Bengal, during cyclone THANE

We studied the wave characteristics during the very severe cyclonic storm THANE which crossed the east coast of India between Puducherry and Cuddalore based on waves measured at a location in Bay of Bengal at 14 m water depth. Objective of the paper is to document the highest wave height measured in the nearshore waters of east coast of India. On 29 December 2011, cyclone passed within 77–315 km of the wave measurement location with maximum wind speed of 46.3 m/s (90 knots) and resulted in maximum wave height of 8.1 m. Maximum wave height recorded is 0.54 times the water depth, and the ratio of crest height to wave height of the highest wave recorded is 0.65. Maximum value of significant wave height estimated using the parametric wave model for deep-water conditions is 6.4 m, whereas the measured value is 6 m indicating that parametric wave model estimates the wave height reasonably well (within 8 % error) during the cyclone period.     

Nearshore propagation of cyclonic waves

Cyclone-generated surface waves are simulated using state-of-art SWAN (Simulating WAves Nearshore) model coupled with hydrodynamic model inputs. A severe cyclonic storm passed over the Arabian Sea during 4–9th November 1982 is selected from UNISYS track records. The cyclone lasted for nearly 6 days and subsided with a land fall at Gujarat coast, west coast of India. In this study, cyclonic wind fields are generated using a well-established relationship suggested by Jelesnianski and Taylor (1973). The associated water level variations due to storm surge and surge generated currents are simulated using POM (Princeton Ocean Model). The outputs are one-way coupled with the wave model SWAN for simulating wave parameters off Gujarat, north-east basin of Arabian Sea. An extensive literature review is carried out on the progress and methodology adopted for storm wave modelling and analysis. The results presented in this paper reveal the severity of the storm event and would be highly useful for assessing the extreme wave event/climate especially for the south coast of Gujarat.     

Impact of wind gusts on sea surface height in storm surge modelling, application to the North Sea

Storm surge models usually do not take into account the explicit effect of wind gusts on the sea surface height. However, as the wind speed enters quadratically into the shallow water equations, short-term fluctuations around the mean value do not average out. We investigate the impact of explicitly added gustiness on storm surge forecasts in the North Sea, using the WAQUA/DCSM model. The sensitivity of the model results to gustiness is tested with Monte Carlo simulations, and these are used to derive a parametrisation of the effect of gustiness on characteristics of storm surges. With the parametrisation and input from the ECMWF model archive, we run hindcasts for a few individual cases and also the 2007–2008 winter storm season. Although the explicit inclusion of gustiness increases the surge levels, it does not help to explain, and hence reduce, the errors in the model results. Moreover, the errors made by ignoring gustiness are small compared to other errors. We conclude that, at present, there is no need to include gustiness explicitly in storm surge calculations for the North Sea.     

Storm surge vulnerability along Chennai–Cuddalore coast due to a severe cyclone THANE

A very severe cyclonic storm ‘Thane’ developed over the Bay of Bengal during 25–30 December 2011, crossed the Tamilnadu coast between Pondicherry and Cuddalore (southeast coast of India) in early hours of 30 December with a wind speed 120–140 km/h. The offshore tide record reveals that the surge started to generate around 1100 hours on 29 December 2011 with a height 0.4 m and later raised to 0.68 m at the time of land fall, that is, early hours (0000 hours) of 30 December 2011. Field reconnaissance survey on surge run-up and inundation distance at 15 selected locations of cyclone affected areas reveals that the vulnerability levels are highly variable along the coast. The inundation distance extended up to 30–230 m landward from the shoreline and run-up reached to 1.6–3.2 m above chart datum depending upon the cross-shore geometry of the location. In the areas (Verranampattinam, Chinamudaliyar kuppam and Silver beach) near cyclone landfall, the run-up was up to 2.5–3.2 m and the inundation distance extended up to a maximum of 230 m. However, in the areas located about 150 km north of cyclone landfall, the run-up limited from 1.6 to 1.7 m and the inundation distance extended up to only a maximum of 169 m. The inundation distance is mainly influenced by the slope of the beach. In the areas having beach slope between 1 in 135 and 1 in 220, the inundation distance was 210–230 m. However, in the areas having beach slope 1 in 17 to 1 in 34, the inundation distance is restricted between 35 and 50 m.     

Simulation of atmospheric states for a storm surge on the west coast of Korea: model comparison between MM5, WRF and COAMPS

High-quality informations on sea level pressure and sea surface wind stress are required to accurately predict storm surges over the Korean Peninsula. The storm surge on 31 March 2007 at Yeonggwang, on the western coast, was an abrupt response to mesocyclone development. In the present study, we attempted to obtain reliable surface winds and sea level pressures. Using an optimal physical parameterization for wind conditions, MM5, WRF and COAMPS were used to simulate the atmospheric states that accompanied the storm surge. The use of MM5, WRF and COAMPS simulations indicated the development of high winds in the strong pressure gradient due to an anticyclone and a mesocyclone in the southern part of the western coast. The response to this situation to the storm surge was sensitive. A low-level warm advection was examined as a possible causal mechanism for the development of a mesocyclone in the generating storm surge. The low-level warm temperature advection was simulated using the three models, but MM5 and WRF tended to underestimate the warm tongue and overestimate the wind speed. The WRF simulation was closer to the observed data than the other simulations in terms of wind speed and the intensity of the mesocyclone. It can be concluded that the magnitude of the storm surge at Yeonggwang was dependent, not only on the development of a mesocyclone but on ocean effects as well.     

Coastal flooding: impacts of coupled wave–surge–tide models

Wind waves and elevated water levels together can cause flooding in low-lying coastal areas, where the water level may be a combination of mean sea level, tides and surges generated by storm events. In areas with a wide continental shelf a travelling external surge may combine with the locally generated surge and waves and there can be significant interaction between the propagation of the tide and surge. Wave height at the coast is controlled largely by water depth. So the effect of tides and surges on waves must also be considered, while waves contribute to the total water level by means of wave setup through radiation stress. These processes are well understood and accurately predicted by models, assuming good bathymetry and wind forcing is available. Other interactions between surges and waves include the processes of surface wind-stress and bottom friction as well as depth and current refraction of waves by surge water levels and currents, and some of the details of these processes are still not well understood. The recent coastal flooding in Myanmar (May 2008) in the Irrawaddy River Delta is an example of the severity of such events, with a surge of over 3 m exacerbated by heavy precipitation. Here, we review the existing capability for combined modelling of tides, surges and waves, their interactions and the development of coupled models.     

Effects of Wave–Current Interaction on Salt Intrusion During a Typhoon Event in a Highly Stratified Estuary

Wave–current interaction (WCI) is important in modulating hydrodynamics and water mixing in estuaries, and thereby the transport of water-borne materials. However, the effects of WCI on salt transport and salt intrusion in estuaries during storm events have been rarely examined. In the present study, we use a coupled atmosphere–ocean–wave–sediment transport (COAWST) modeling system to investigate the effects of WCI on salt intrusion in the highly stratified Modaomen Estuary during Typhoon Hagupit (2008). The model is validated by the measured wave, water elevation, and surface salinity data, and several diagnostic model experiments are conducted. WCI increases the storm surge by 0.8 m at the peak surge (25% of the total surge height). The wave-breaking-induced momentum flux and the Stokes drift increase the magnitude of the landward flow by 0.3 m s^?1 (30% of the total landward flow). In addition, the waves increase water mixing by 2–4 times compared with that without waves. Hence, WCI significantly increases the landward advective salt transport and decreases the steady shear transport. The net effect of the WCI is a significant increase of salt import and salt intrusion during the typhoon event. However, in the aftermath of the storm, the imported salt water is rapidly flushed out by the increased river discharge, and the estuary regains its stratification within one day.     

Correction to: Tropical cyclone: expressions for velocity components and stability parameter

Historically, Leyte Gulf in central eastern Philippines has received catastrophic damage due to storm surges, the most recent of which was during Typhoon Haiyan in 2013. A city-level risk assessment was performed on Leyte Gulf through synthetic storm generation, high-resolution ocean modeling, and decision tree analyses. Cyclones were generated through a combination of a Poisson point process and Monte Carlo simulations. Wind and pressure fields generated from the cyclones were used in a storm surge model of Leyte Gulf developed on Delft3D. The output of these simulations was a synthetic record of extreme sea level events, which were used to estimate maximum surge heights for different return periods and to characterize surge-producing storm characteristics using decision tree analyses. The results showed that the area most prone to surges is the Tacloban–Basey area with a 2.8?±?0.3 m surge occurring at a frequency of every 50 years. Nearby Palo area will likely receive a surge of 1.9?±?0.4 m every 50 years while Giporlos–Salcedo area a surge of 1.0?±?0.1 m. The decision tree analysis performed for each of these areas showed that for surges of 3–4 m, high-velocity winds (>?30 m/s) are consistently the main determining factor. For the areas, Tacloban, Basey, and Giporlos–Salcedo, wind speed was also the main determining factor for surge?>?4 m.