消能支撑框架结构设计方法探讨

本文提出了一种新的消能支撑框架结构设计方法，该方法能够实现罕遇地震下结构的目标位移控制，其主要设计思路是框架主体结构按非抗震设计或降低烈度进行抗震设计，消能支撑则由罕遇烈度地震下满足给定层间位移角限值的优化计算来确定。本文还给出了一个15层框架结构的设计算例，并把本文方法的设计结果与按常规方法的设计结果进行了比较。     

框架结构消能支撑的减震优化方法

运用非线性规划中的复形法,对消能支撑框架结构中消能支撑的参数进行了优化,编制了适用性较好的计算机程序,并以一个６层钢筋混凝土框架作为算例,给出了在不同层间位移角限值下的优化结果。     

摩擦消能支撑装置非线性刚度分析

多层建筑结构中设置摩擦消能支撑是以“柔性消能”减小地震反应，实现结构被动控制的有效途径之一，本文通过分析和计算I0型，IIb型两种摩擦消能支撑装置在各种形状态下的单元刚度矩阵[KNL(t)]，为摩消能减震结构体系在地震作用下的非线性进程分析提供了消能支撑单元的精确理论模型。     

摩擦消能支撑钢框架结构的弹塑性地震反应时程分析

本文分析了摩擦消能支撑及框架主体结构弹塑性本构关系，并给出了动力时程分析的计算方法。同时，对六层钢框架模型做了各种工况下的地震反应时程分析。结果表明，摩擦消能支撑钢框架（FEDBF）比抗弯钢框架（MRF）的地震作用明显降低，尤其在强震作用下效果更加明显。     

铅挤压消能支撑框架模型结构试验研究

通过铅挤压消能器的低周反复加载试验,以及安装有铅挤压消能器的钢筋混凝土消能支撑框架模型结构的伪静力试验,主要研究了铅挤压消能器单独受反复荷载时的消能性能以及其在模型结构中所起的消能作用,模型结构的破坏机理和整体消能能力。研究结果表明,铅挤压消能器具有很好的消能能力,在模型结构总耗能中占据了很大的比例,模型结构具有较好的耗散地震能量的能力。     

高层建筑用复合型摩擦消能支撑的设计试验和分析

本文介绍了复合型摩擦消能支撑的设计、试验及工作机理分析，并给出了消能支撑减震体系的分析方法。     

考虑支撑变形时安装非线性粘滞消能器结构的抗震设计方法

通过理论分析和大量数值模拟,揭示了线性和非线性粘滞消能器两端的相对水平位移幅值与所在层的层间位移幅值之间的关系,总结提出了考虑支撑变形时安装非线性粘滞消能器结构的实用抗震设计步骤。上述研究结果拓展了现行《建筑抗震设计规范》中有关粘滞消能器部分的设计规定。     

消能支撑框架结构的低周往复水平荷载试验仿真分析方法

本文提出了低周往复水平荷载试验仿真分析方法，该法既不同于弹塑性地震反应时程分析，又不同于常见的弹塑性静力分析。它能模拟低周往复水荷载试验的过程，既避免了地震波频谱的影响又体现了水平荷载的往复作用，可用于计算结构和构件的滞回曲线、截面的屈服顺序及相应的荷载和位移，尤其适用于分析消能支撑框架结构等耗能减震结构。本文用此方法分析了在框架柱轴压比超过限值要求时消能支撑的作用。     

宿迁市建设大厦消能减震设计

宿迁市建设大厦,21层,框架-抗震墙结构,按Ⅷ度(0．3g)进行抗震设防;由于建筑部分楼层层间位移超过《规范》要求,因此在部分楼层增设消能支撑,通过提高结构的附加阻尼比来降低结构的位移反应。整体结构的非线性时程分析结果表明,在框架-抗震墙结构中增设消能支撑,可以较为经济地控制结构薄弱层的位移,提高结构的抗震安全储备。本文可为高烈度区类似工程的设计提供借鉴。     

消能支撑-方钢管混凝土框架结构抗震性能的试验研究

本文设计了一榀消能支撑框架,方钢管混凝土通过不同频率、不同位移幅值下的水平低周反复荷载试验,验证了消能支撑框架优异的消能能力,提出了相关连接构造的设计建议,为中高层钢结构住宅提供了一种新的抗震设计思路。     

Seismic retrofitting of reinforced concrete frame structures using GFRP-tube-confined-concrete composite braces

This paper presents a new type of structural bracing intended for seismic retrofitting use in framed structures. This special composite brace,termed glass-fiber-reinforced-polymer(GFRP)-tube-confined-concrete composite brace,is comprised of concrete confined by a GFRP tube and an inner steel core for energy dissipation.Together with a contribution from the GFRP-tube confined concrete,the composite brace shows a substantially increased stiffness to control story drift, which is often a preferred feature in seismic retrofitting.An analysis model is established and implemented in a general finite element analysis program-OpenSees,for simulating the load-displacement behavior of the composite brace.Using this model,a parametric study of the hysteretic behavior(energy dissipation,stiffness,ductility and strength)of the composite brace was conducted under static cyclic loading and it was found that the area ratio of steel core to concrete has the greatest influence among all the parameters considered.To demonstrate the application of the composite brace in seismic retrofitting, a three-story nonductile reinforced concrete(RC)frame structure was retrofitted with the composite braces.Pushover analysis and nonlinear time-history analyses of the retrofitted RC frame structure was performed by employing a suite of 20 strong ground motion earthquake records.The analysis results show that the composite braces can effectively reduce the peak seismic responses of the RC frame structure without significantly increasing the base shear demand.     

钢筋混凝土耗能支撑框架结构的震害预测

首先介绍了一种新的震害预测方法——基于模糊概率的震害预测模型。在分析了钢筋混凝土框架结构抗震性能以及摩擦耗能支撑框架结构在地震作用下力学性能的基础上，提出用结构层间屈服强度系数、层间剪切位移角和地震损伤指数这三个指标作为其主要震害影响评价因子。同时，利用所提出的预测方法，建立了钢筋混凝土耗能支撑框架结构房屋的震害预测模型。     

Experimental study on the seismic response of braced reinforced concrete frame with irregular columns

A 15-storey K-braced reinforced concrete model frame with irregular columns, i.e., T-shaped, L-shaped, as well as +-shaped columns, was constructed and tested on the six-degree-of-freedom shaking table at the State Key Laboratory for Disaster Reduction in Civil Engineering in Tongji, China. Two types of earthquake records, El-Centro wave (south-north direction) and Shanghai artificial wave (SHAW) with various peak accelerations and principal-secondary sequences, were input and experimentally studied. Based on the shaking table tests and theoretical analysis, several observations can be made. The failure sequence of the model structure is brace→beam→column→joints, so that the design philosophy for several lines of defense has been achieved. Earthquake waves with different spectrums not only influence the magnitude and distribution of the earthquake force and the storey shear force, but also obviously affect the magnitude of the displacement response. The aftershock seismic response of previously damaged reinforced concrete braced frames with irregular columns possesses the equivalent elastic performance characteristic. Generally speaking, from the aspects of failure features and drift ratio, this type of reinforced concrete structure provides adequate earthquake resistance and can be promoted for use in China.     

Subassemblage cyclic loading test of RC frame with buckling restrained braces in zigzag configuration

A new buckling restrained braced frame system is proposed for reinforced concrete building structures, which is featured by the zigzag configuration of the braces and the corresponding connection details. The connection details tend to separate the vertical and horizontal components of force imposed by the braces to be resisted by independent structural components to make the behavior of the connection easier to estimate and control. The performance of the brace connection details was evaluated through cyclic load testing on 1/2‐scale subassemblies of the proposed system, each of which consisted of a reinforced concrete part and a set of buckling restrained braces. To simplify the test control, the specimens were rotated 90° in the test and were loaded by two displacement controlled actuators. The test results show that the normal and the shear resistance of the gusset plate connection are essentially independent of each other. However, the rotation of the gusset plate with respect to the beam‐to‐column joint may result in nonuniform force distribution of the anchor bolts, the primary resistance for tensile force. At the same time, such rotation may also subject the concrete corbels, the primary shear resistance, to unfavorable tensile force. In addition, it is also confirmed that the buckling restrained braces performed well in the proposed system. Copyright © 2012 John Wiley & Sons, Ltd.     

套建增层预应力钢骨混凝土框架弹塑性地震反应分析

从套建增层改造实践中存在的问题出发,提出了一种新型外套增层结构型式,即以内置H型钢预应力混凝土组合梁为框架梁、以配置4个或8个角钢的角钢混凝土柱为框架柱的套建增层用框架结构,并给出了节点构造。根据不同的场地条件和地震设计分组,对基于现行设计标准设计的跨度为16m的新型套建增层框架进行了罕遇地震作用下的时程分析。分析结果表明,在满足常遇地震作用下的设计要求时,在7度和8度罕遇地震作用下,建造在I、II、III类场地上的部分套建增层框架将会倒塌。根据弹塑性反应分析结果,提出了在罕遇地震作用下避免这种套建增层框架发生倒塌的设计建议。     

钢筋混凝土开洞剪力墙结构抗震非线性有限元分析

本文以钢筋混凝土开洞剪力墙结构为研究对象，建立了该类结构动力非线性有限元分析计算及该类结构静力非线性pushover有限元分析计算的基本过程，并编制了相应的计算机程序．通过与实验分析结果的比较，检验了本文动力非线性有限元分析计算方法的准确程度，验证了静力非线性pushover有限元分析方法应用于开洞剪力墙抗震非线性性能评估的可靠性。     

H形断面钢筋混凝土立体剪力墙的非线性动力响应分析

为了建立统一的动力响应分析模型,本文以NUPEC振动台试验的H形断面钢筋混凝土立体剪力墙为研究对象进行了三维非线性有限元动力响应分析。根据分析结果与试验结果的比较可知,在RC剪力墙到达最大承载力之前由简化模型和一般模型得到的动力响应特性与试验结果吻合较好,荷载-变形关系能很好模拟试验结果。但是,最大承载力之后,由于混凝土开裂、损伤、劣化的急剧发展,较难模拟混凝土开裂、裂缝的开闭及滑移等非线性特性,分析得到的加速度衰减较慢、位移响应较小。基于上述研究成果探讨并提出了进一步改善非线性有限元动力响应分析精度的建议。     

Self-centering seismic retrofit scheme for reinforced concrete frame structures: SDOF system study

This paper presents the results of a parametric study of self-centering seismic retrofit schemes for reinforced concrete (RC) frame buildings. The self-centering retrofit system features flag-shaped hysteresis and minimal residual deformation. For comparison purpose,an alternate seismic retrofit scheme that uses a bilinear-hysteresis retrofit system such as buckling-restrained braces (BRB) is also considered in this paper. The parametric study was carried out in a single-degree-of-freedom (SDOF) system framework since a multi-story building structure may be idealized as an equivalent SDOF system and investigation of the performance of this equivalent SDOF system can provide insight into the seismic response of the multi-story building. A peak-oriented hysteresis model which can consider the strength and stiffness degradation is used to describe the hysteretic behavior of RC structures. The parametric study involves two key parameters -the strength ratio and elastic stiffness ratio between the seismic retrofit system and the original RC frame. An ensemble of 172 earthquake ground motion records scaled to the design basis earthquake in California with a probability of exceedance of 10% in 50 years was constructed for the simulation-based parametric study. The effectiveness of the two seismic retrofit schemes considered in this study is evaluated in terms of peak displacement ratio,peak acceleration ratio,energy dissipation demand ratio and residual displacement ratio between the SDOF systems with and without retrofit. It is found from this parametric study that RC structures retrofitted with the self-centering retrofit scheme (SCRS) can achieve a seismic performance level comparable to the bilinear-hysteresis retrofit scheme (BHRS) in terms of peak displacement and energy dissipation demand ratio while having negligible residual displacement after earthquake.