Heavy Metal Distributions and Source Tracing in the Lacustrine Sediments of Dongdao Island,South China Sea

The levels and depth distributions of As, Cd, Cu, Zn, Pb, Hg, Fe and Mn in two sediment cores DY2 and DY4 collected from the ＂Cattle Pond＂ of Dongdao Island, South China Sea, were determined and analyzed with the main objective to identify the sources of these elements and evaluate the corresponding sedimentological and geochemical processes. Lithological characters and sedimentary parameters such as LOI950℃, CaO, LOI550℃ and TOC indicate that the depth of 96 cm and 87 cm are the critical points for DY2 and DY4 cores, respectively. As, Cd, Cu, Zn, Hg and P are remarkably enriched in the ornithogenic sediments above the critical depth points; their concentration-versus-depth profiles are similar to those of TOC and LOI550℃; the ratios of As, Cd, Cu, Zn, Hg over Ca are significantly correlated with P/Ca. Statistical and comparative analyses of these elements＇ levels in the ornithogenic sediments of DY2 and DY4 strongly suggest that seabird droppings are the main source of these elements. Additionally, for the upper sediment layers of DY2 and DY4 cores, Fe oxide sorption mechanism, like organic matter, may also play an important role in the abundances of heavy metals. Heavy metal Pb has geochemical characteristics distinctly different from those of As, Cd, Cu, Zn, Hg and P, and its isotope composition indicates an origin of anthropogenic emissions from the surrounding countries. These geochemical characteristics in the orinithogenic sediments of Xisha Islands are compared with the studies in the remote Antarctic and Arctic regions.     

Heavy Metal Distributions and Source Tracing in the Lacustrine Sediments of Dongdao Island, South China Sea

The levels and depth distributions of As,Cd,Cu,Zn,Pb,Hg,Fe and Mn in two sediment cores DY2 and DY4 collected from the"Cattle Pond"of Dongdao Island,South China Sea,were determined and analyzed with the main objective to identify the sources of these elements and evaluate the corresponding sedimentological and geochemical processes.Lithological characters and sedimentary parameters such as LOI_(950℃),CaO,LOI_(550℃) and TOC indicate that the depth of 96 cm and 87 cm are the critical points for DY2 and DY4 cores,respectively.As,Cd,Cu,Zn,Hg and P are remarkably enriched in the ornithogenic sediments above the critical depth points;their concentration-versus-depth profiles are similar to those of TOC and LOIssooc;the ratios of As,Cd,Cu, Zn,Hg over Ca are significantly correlated with P/Ca.Statistical and comparative analyses of these elements' levels in the ornithogenic sediments of DY2 and DY4 strongly suggest that seabird droppings are the main source of these elements.Additionally,for the upper sediment layers of DY2 and DY4 cores,Fe oxide sorption mechanism,like organic matter,may also play an important role in the abundances of heavy metals.Heavy metal Pb has geochemical characteristics distinctly different from those of As,Cd,Cu,Zn,Hg and P,and its isotope composition indicates an origin of anthropogenic emissions from the surrounding countries.These geochemical characteristics in the orinithogenic sediments of Xisha Islands are compared with the studies in the remote Antarctic and Arctic regions.     

Heavy metal distributions in the sediments of “Cattle Pond” on the Dongdao Island of South China Sea: Geochemical and statistical approaches for source tracing

The Dongdao Island of the Xisha atolls is located in the center of the South China Sea. The nearby ambient sea, with thousands of reefs, atolls, submerged reefs and banks, is probably one of the most biologically diverse bodies of water on the planet. Due…     

Trace metal geochemistry of core sediments between Visakhaptanam and Kakinada, along the eastcoast of India

Six sediment core samples collected from the innershelf of the east coast of India between Visakhapatnam and Kakinada were analyzed for major （Al ＆ Fe） and trace metals （Cu, Co, Ni, Cd, Pb, Zn, Mn ＆ Cr） to study the processes that regulate their concentrations in coastal sediments and to evaluate the metal contamination due to anthropogenic interference. High concentrations of Fe （5%-7%） are attributed mainly to the fine texture and its proximity to the source, maflc rocks. Positive correlation of Fe with Mn in all the cores indicates the influence of early diagenetic process. Positive correlations between Co, Ni, Zn and Cd among themselves and with Fe indicate their adsorption to ferromanganese oxides and involvement in geochemical processes. Further normalization of metals to Al indicates that the sediments are depleted in Mn ＆ Zn and relatively enriched in Cd, Co, Ni, Pb ＆ Cr, which also confirms that the origin of these sediments is of geological rather than biogenic importance. The Geo-accumulation （Igeo） values calculated for Ni, Pb, Co, Cd, Zn ＆ Cr are more or less near to unity （Igeo≥1）, indicating no industrial metal pollution. Pollution Load Index （PLI） values （1-2） calculated for the trace metals confirm the above findings.     

Enrichment and mobility of cadmium and other heavy metals in the area of the Three-Gorges Reservoir

This study focused on the geochemical distribution patterns and ecological effects of Cd and other heavy metals such as As, Hg, Cr, Cu, Ni, Pb, and Zn in rock, soil, water, sediment and crops in the area of the Three-Gorges Reservoir within Chongqing, and aimed at the protection of ecological environment and rational application of the local lands. This study found that the metals of Cd, Hg and Pb presented pollution in the surface environment along the Yangtze River, that is Cd〉Hg〉Pb （Cu）〉Zn〉As〉Ni〉Cr. The pollution of Cd in sediment was mainly attributable to the regional black shales, and partly to the urban sewage and garbage. The geochemical modes of metals in the sediment varied. Cr, Hg, Ni, and Pb mainly existed as residues, and Cd as carbonate. Cd exited as a high proportion in the modes of ion-exchange, carbonate, and iron-manganese oxidation, up to 63 percent. The contents of heavy metals in soiland sediment were correlated to the host clay minerals, such as illite, montmorillonite, kaolinite and chlorite. It is shown that Cd was transported with clay minerals in the Yangtze River over long distance and formed the regional anomaly. In the abnormal area of Jianping in Wushan County, higher Cd contents are reported in the local crops and local villagers＇ hairs than from the background areas.     

Contamination and bioavailability of heavy metals in sediments from the Yangtze River Delta Region

The Yangtze River Delta Region is one of the most important economic development areas in China. In the process of its industrialization and urbanization, a great deal of wastewater is poured into rivers, lakes and coasts. Researches on contamination and bioavailability of heavy metals can help us to assess the ecological risks in the aquatic environment of the Yangtze River Delta. The samples were collected from three environmental compartments including the Yangtze River, Taihu Lake, and the south coast of Jiangsu. The concentrations of heavy metals were determined by ICP-MS. Metal speciation was determined by the sequential extraction procedure modified based on Tessier＇s scheme. Among the seven elements of Cu, Pb, Zn, Cr, Cd, Co, Ni detected, the contents of Cr, Zn did not vary significantly, while Cd and Pb varied significantly. Compared to the background values （loess in the basement）, all metals detected except Co, Cr exceeded the background level. Cd had the greatest exceeding values, reaching 2 to 7 times. Ni and Pb were followed. The contents of Zn were comparatively high in lake sediments, especially in the lake bays. Ni was enriched in fiver sediments and Cu was highest in sediments from the Yangtze River estuary. Cd and Pb were concentrated in the coastal sediments. Comparatively, in space, Cr was associated with the carbonate fractions in the bay of lake. Cu-bound Fe-Mn oxides and Ni in residual form were highest in the open lake. In the river environment, Fe/Mn oxide-bound Pb, exchangeable Cd were the highest fractions. In the estuary environment, Pb and Zn bound carbonates, Cd-bound Fe-Mn oxides are the largest fractions. Cd in the exchangeable fraction, Cu-bound Fe-Mn oxides had the larger proportions in the coast. In general, the bioavailability of Cu and Cd were high in lake environment, the available Pb, Cd were remarked in river environment, and Pb and Zn were easily assimilated by creatures in estuary.     

Study on soil heavy metals contamination of a lead refinery

The contents of Pb, Cd, Cr, As, and Hg was investigated in the neighboring areas of a lead smelting enterprise and the metals contamination of soil was evaluated with the methodologies of the single factor index and Nemerow integrated index. It is found that the content of heavy metals in the neighboring areas has no obvious difference from the reference points. And the soil contamination of heavy metals varies by elements, the contamination index follows the pollution order： Cd〉Hg〉Cr〉As〉Pb. The pollution degree of Cd is at high level and Hg at low level, but Cr and As reached the warning level. Therefore, the lead smelting enterprises should not only control lead but also other heavy metals as Cd.     

Speciation and potential remobilization of heavy metals in sediments of the Taihu Lake, China

The species of Cu, Pb, Zn, Cd and Cr in sediments of the Taihu Lake, China, have been analyzed using the sequential chemical extraction method. Variations in the chemical fractions of these metals and their geographic distributions have also been studied. For all five metals, the residual fraction is highest but the exchangeable fraction is lowest among all the fractions. Compared to other metals, Cd has the highest percentage in the exchangeable fraction, and Cr is associated mainly with the residual fraction. Cu in the organic fraction and Pb in the Fe-Mn fraction are the important species, whereas the lowest percentages are found for Cd in the organic fraction, Cu in the Fe-Mn oxide fraction and Pb in the carbonate fraction. With respect to spatial differences, the total contents in the non-residual fractions of the metals in bay sediments are found to be higher than those in other sediments. The fractions of Cd, Cu and Cr showed significant variations in different regions. The fractions of Pb and Zn, however, did not show significant variations in spatial distribution, suggesting different amounts and different paths of anthropogenic input for the metals. Comparisons of the metal speciation indicated that Cd might be the most bioavailable metal, followed by Pb.     

Critical Loads of Heavy Metals in a Highly Polluted Catchment Area in Egypt

Heavy metals in different environmental compartments can be hazardous to ecosystems. Budgets of Cd, Pb and Zn in small ecosystems of the Shubra E1-Kheima area in Egypt are presented. The budgets are not in steady state because they change with time. So the concentrations of the metals are a function of time. The critical loads of heavy metals to soils can be calculated from an inventory of inputs and outputs of the trace components in the catchment area.Critical time is an important parameter for critical load evaluation because it can indicate which of the heavy metals may be the most acute threat to the soils. Egyptian soil in the Shubra ElKheima area seems to be in danger of heavy metal pollution by Zn, Cd and Pb. The calculated critical loads and their exceedances are approximate indicators of the hazards in the soil system.The critical time is a warning signal to initiate an environmental evaluation of possible pollution hazards.     

Assessment of heavy metals contamination in soils of Dexing region, Jiangxi Province, China

Heavy metal contamination has attracted huge concern due to its toxicity, abundance and persistence in the environment, and subsequent accumulation in soil, sediment and water. Mining is one of the most important sources of heavy metals in the environment. Mining-milling operations and disposal of tailings （the finely ground remains of milled ores） in addition to smelting and metal refining provide significant sources of pollution. Mining and mineral processing in the Dexing region of China have been carried out for over forty years and have contaminated the soils with heavy metals, Many studies were conducted to assess and establish the extent of heavy metal contamination in the soils due to mining. The aim of this work was to assess the environmental impact of mining on soils in the Dexing region and to identify the main factors involved in heavy metals dispersion. A 4800 km^2 study area was assessed with respect to its heavy metals on the basis of the current guideline values. In order to assess the extent of heavy metals contamination resulting from past mining activities in the Dexing region, 919 soil samples were collected and analyzed for As, Hg, Cd, Cr, Zn, Cu and Pb, Heavy metals levels were determined using inductively couple plasma-atomic emission spectrometry and X-ray fluorescence spectrometry. Results of soil samples reported concentrations between 1.790-899 mg/kg for As, 0.034-4.980 mg/kg for Hg, 0.043-8.330 mg/kg for Cd, 10-666 mg/kg for Cr, 25-18500 mg/kg for Zn, 6-1825 mg/kg for Cu, and 16-1312 mg/kg for Pb, respectively. The maximum values of As, Hg, Cd, Cr, Zn, Cu and Pb concentration in soils were up to 60, 33, 41, 7, 185, 52 and 37 times higher than the tolerable level, respectively. Meanwhile, the single-factor pollution index and Nemerow pollution index were used to assess the environment quality of heavy metals contamination.     

Visible and near infrared reflectance spectroscopy for measuring soil heavy metal content as a quick method

Conventional methods for investigating soil heavy metal contamination based on raster sampling and chemical analysis are time consuming and relatively expensive. Reflectance spectroscopy within the visible-near-infrared （VNIR） region is known for being rapid, convenient, and accurate. Due to low abundance, heavy metals in soils cannot exhibit their inherently spectral features. The objective of this study were （1） to examine the possibility of reflectance spectra as a rapid method to assess Ni, Cr, Cu, Hg, Zn, As, Pb, and Cd in soils, and （2） to explore the mechanism by which to predict spectrally featureless heavy metals. Two research areas located in the south （120 samples） and north （61 samples） of Nanjing City were researched. Reflectance spectra of the samples were recorded on a Perkin-Elmer Lambda 900 spectrophotometer. Partial least-square regression （PLSR） approach was used to develop calibration equations between the spectral data and measured values for heavy metals. The prediction results of the two areas were consistent. Except for Cd all the other elements could be successfully predicted using the reflectance spectra. The prediction accuracy for Ni, Cr, and Cu was highest, while that for Hg and Cd was lowest. In order to further explore the physicochemical mechanism behind the relations between reflectance spectra and heavy metals, one more principal component analysis （PCA） was done for nine elements （eight heavy metals and Fe）. The results of PCA for the both areas were also consistent. Loading plot of factors 1 and 2 from the results of PCA showed that Ni, Cr and Cu, the prediction accuracy of which was highest, were clustered together with Fe. For the other elements that were less correlated with Fe, their prediction accuracy was also lower than that of the three elements. Fe is spectrally active and can exhibit its absorption features. Therefore, the inter-correlation between heavy metals and spectrally active total Fe is the major mechanism by which to predict spectrally featureless trace metals. This study for the two areas showed the potential of reflectance spectra to predict microelements in soils.     

One hundred years of sedimentation history of heavy metals in Daya Bay, China

The estuarine and coastal systems play an important role in sedimentary deposition which acts as a sink of particle-associated contaminants （PACs） such as heavy metals and polycyclic aromatic hydrocarbons. These pollutants are supposed to be harmful to biota in aquatic systems by their persistence, bio-accumulation and toxicity. Therefore, it is needed to understand how anthropogenic activities change the concentrations of potential contaminants in the aquatic environment. In addition, chronologies of metal concentrations can be constructed by ^137Cs and ^210Pbex in dated core sediments. In the present work, the concentrations of the heavy metals As, Cd, Cr, Pb, Cu, Zn, Co, Fe, and Mn were measured in sediment cores collected from four stations （W0, W2, W6, W9） around the Guangdong Nuclear Power Station （GNPS） at the Daya Bay （China）. Methods： after dissolved by mixed mineral acids, the concentrations of heavy metals were determined by PE AAnalysit-700 atomic absorption spectroscopy. The composition of total organic mater （TOC） and total nitrogen （TN） was also evaluated by elemental analysis instruments （CHN-O-RAPID, Heraeus, Germany）. Activities of ^210Pbex and ^137Cs were determined on a Gamma-ray spectrometer （EG ＆ G ORTEC ADCAM-2000, P-type, relative efficiency 35%）. Results and discussion： the experimental data showed that the average values of heavy metals are 18.6, 0.035, 32.9, 38.1, 10.6, 74.9, 4.1, 29100 and 543 mg/kg for As, Cd, Cr, Pb, Cu, Zn, Co, Fe and Mn, respectively, which are obviously larger than the background abundances of those heavy metals in sediment cores.     

Acid Mine Drainage and Heavy Metal Pollution from Solid Waste in the Tongling Mines, China

Based on investigation of the characteristics of solid waste of two different mines, the Fenghuangshan copper mine and the Xinqiao pyrite mine in Tongling, Anhui province in central-east China, the possibility and the differences of acid mine drainage （AMD） of the railings and the waste rocks are discussed, and the modes of occurrence of heavy metal elements in the mine solid waste are also studied. The Fenghuangshan copper mine hardly produces AMD, whereas the Xinqiao pyrite mine does and there are also differences in the modes of occurrence of heavy metal elements in the railings. For the former, toxic heavy metals such as Cu, Pb, Zn, Cd, As and Hg exist mostly in the slag mode, as compared to the latter, where the deoxidization mode has a much higher content, indicating that large amounts minerals in the waste rocks have begun to oxidize at the earth surface. AMD is proved to promote the migration and spread of the heavy metals in mining waste rocks and lead to environmental pollution of the surroundings of the mine area.     

Enrichment of Cd and Pb and associations with grain size in sediments in Nanjing alluvial island of Yangtze River

Intermittence belts of metal contaminated sediment have been formed along the urban riverside of the Yangtze River because of rapid urbanization and industrial development during the last three decades. Baguazhou Island, the third alluvial island in the lower reaches of the Yangtze River, was chosen to assess the contaminations level of Cd, Pb, Ni, Cr, Cu and Zn in suspended particulate matter （SPM）, recent sediments and sediment-derived soils. The relations between the metal concentrations and the grain size distributions in sediments were analyzed in order to explore the association of heavy metal settling with sediment deposition. The results showed that significantly high levels of Cd and Pb in SPM dominated enrichment factors （EFs） of recent sediments in the area of Baguazhou Island. High levels of Cd and Pb were found both in the riverine sediments and in the soils. However, the average levels of Cd and Pb in sediments were almost as twice as those in soil. About 43% of all sediment samples have EFCd≥1.5 and 14% with EFCd≥2. There are about 21% of the samples with EFPb≥1.5 and none of them has EFPb≥2. Meanwhile, soil samples with EFCd≥1.5 account for 39% of all 64 samples and no one with EFPb≥1.0. Most of the sediment samples contain more than 80% of fine grains lower than 60 μm in size, and few samples located in the site where flow eroding process dominates contain fine grains lower than 30%. Correlation analysis indicated that the concentrations of Cd and Pb in the sediments have significant relationships with grain size.     

Human Influence on Heavy Metal Distribution in the Upper Lake Nansi Sediments, Shandong Province, China

Core and surface sediment samples were collected from three sub-lakes ( Lake Nanyang, Lake Dushan and Lake Zhaoyang) in the Lake Nansi Basin, Shandong Province. In order to reveal the characteristics of spatial and historical distribution of heavy metals in different sublakes of the Upper Lake Nansi, heavy metal (As, Cr, Cu, Hg, K, Mn, Ni, Pb, Zn, Al, Fe, Ti and V) concentrations of sediment samples were investigated. Based on the activity of^137Cs in the sediments, the modem accumulation rate of Lake Nansi sediments is 3.5 mm/a. Our results show that the whole Upper Lake Nansi has been already polluted by heavy metals, among which Lake Nanyang has been polluted seriously by mercury, as well as by lead and arsenic, while Lake Dushan has been most seriously polluted by lead and arsenic. Historical variation of heavy metal (Cr, Cu, K, Ni, Zn, A1, Fe, Ti and V) concentrations shows an abrupt shift in 1962, resuiting in a division of two periods: from 1957 to 1962 when metal enrichment increased with time, and from 1962 to 2000 when it decreased with time, while that of some anthropogenic elements such as Hg, Pb and Mn tend to increase toward the surface. However, the variation trend of As in the sediments is different from that of Hg, Pb and Mn, with its maximum value appearing in 1982. Since 1982 the concentrations of As have decreased due to the forbidden use of arsenite pesticides. This variation trend revealed changes in manner of human activity (coal combustion, waste discharges from both industries and urban sewage ) within the catchment during different periods.     

Geochemical features of heavy metals in core sediments of northwestern Taihu Lake, China

Sequential core sediments from northwestern Taihu Lake in China were analyzed for grain size, organic carbon and heavy metal content. The sediments are composed of organic-poor clayey-fine silts. The chemical speciations of Cu, Fe, Mn, Ni, Pb, and Zn were also analyzed using the BCR sequential extraction procedure. Cu, Fe, Ni, and Zn are mainly associated with the residue fraction; Mn is concentrated mainly in exchangeable/carbonate fraction and residue fraction; and Pb mainly in Fe/Mn oxide fraction and organic/sulfide fraction. The exchangeable/carbonate fractions of Cu, Fe, Ni, Zn and Pb are lower. The fractions of Ni, Pb and Zn bound to the Fe/Mn oxide have significant correlations with reducible Mn; the organic/sulfide fractions of Cu, Mn, Ni, Pb, and Zn have significant correlations with TOC. The extractable fractions of Cu, Mn, Ni, Pb, and Zn are high at the top 4 cm of the core sediments as compared to those in the deeper layers, showing the anthropogenic input of heavy metals is due to rapid industrial development. The heavy metal pollution history of the sediments has been recorded since the late 1970s, determined by the result of ^137Cs dating.     

Distribution of heavy metals in an incineration system of solid wastes in the Three-Gorges region of the Yangtze River

On the basis of investigations on the composition and contents of heavy metals in the domestic refuse in the Three-Gorges region of the Yangtze River, in combination with the experimental results, this paper deals with the distribution rule of heavy metals in the various compartments of an incineration system： leachate pool, fly ash and residue. It is concluded that in the leachate pool heavy metals should not be neglectable since about 30% of Pb and 10% of Cr are leached here; in the incineration system, above 74% of Cr, As and Pb exists in residue; above 96% of Hg exists in fly ash and the contents of Cd in fly ash are close to those of residue. It is also concluded that the physical conditions of incineration have a significant influence on the distribution of heavy metals in the incineration system.     

Geochemical characteristics of trace elements in sediments of Dongting Lake, central China

Although eutrophication and trace element contamination are two key environmental problems in Dongting Lake, a systematic study of the distribution of trace elements in sediments of this lake has not previously been undertaken. In order to identify the current levels of trace metal contamination in Dongting Lake, the concentrations of trace elements （Cd, Cr Cu, Ni, Pb, Zn, As and Hg） in the sediments at 53 locations were investigated in this study. The lake, the second largest fresh-water lake in China, boasts three China wetlands of international importance. Dongting Lake which lies in the south of the middle Yangtze River is the most important reservoir lake in the Yangtze River drainage area, and is characterized by fast flow-through water, large runoff volume and short period of exchanging water （no more than 20 days）. The granulometric analysis result of sediments shows that a large proportion of the sediments measures at 2-63 μm in size; the result of mineralogical analysis shows that original mineral is the main composition of the sediments, followed by clay mineral and carbonate. The contents of copper, lead, zinc, cadmium, arsenic and mercury are higher than the background levels of soil （ Ⅰ Soil） in China, but lower than the threshold values for severely polluted soil （Ⅲ Soil） in China except Cd higher than that in Ⅲ Soil. The concentrations of trace elements analyzed are higher than the Threshold Effect Level of Interim Sediment Quality Guideline by Canada EPA and are lower than the Probable Effect Level. The assessment by geoaccumulation index shows that the contamination of Cd reached strong level in Dongting Lake. Study on speciation of metals by a BCR procedure indicates that the trace elements （Cu, Zn, Cr, and Ni） analyzed are mainly distributed in residual phases but Pb in Fe/Mn oxhydroxide phase and Cd in soluble and carbonate-bound fraction. The potential risk was the highest in East Dongting Lake based on the calculated contamination factors which are mostly probably caused by the deposition of the trace element pollutants via the Xiangjiang River and the discharge of the pollution sources in the vicinity of East Dongting Lake.     

Changes to cadmium associations in canal sediments on drying and oxidation

The mainly 19th Century canal system in the UK, largely managed by British Waterways, has been increasingly brought back into operation over the last few decades, and is now widely used for both leisure, and, increasingly, transport. Both initial and routine dredging of the canal sediment is carried out and these sediments are generally disposed of to land. Because many of the canals were connected with primary industries, their sediments can locally be significantly contaminated with heavy metals, and the behaviour of these metals under differing redox conditions, when introduced into a new environment （i.e., on land） is of importance for environmental risk-assessment purposes. Canal sediments are often rich in sulfidic mineral phases, and we have attempted to quantify the influence of these sulfidic phases on the release and retention of metals in dredged canal sediments, using a combination of traditional chemical techniques （e.g. sequential extraction） and X-ray absorption spectroscopy （XAS）. Sediment samples have been collected from urban fresh-water canals, one in the British Midlands and one in Northern France. It appears from XAS that Cd is largely associated with oxygen in air-dried sediment, and with sulphur in vacuum-dried sediment.     

Heavy metal concentrations in water and surface sediments of Maharlou Lake, SE of Shiraz, Iran

The main objective of this study is to evaluate trace metal distribution and identify their sources in the Maharlou Lake. Trace metals （Cr, Co, Ni, Cu, Zn, Cd, Pb） and major elements （A1, Ca, Fe, K, Mg, Mn, Na, P） were investigated in water and surface sediments. There was a negative relationship between the depth of water and heavy metal concentration. Metal concentrations in water and sediment samples show a high variability and decrease in this order： Al〉Fe〉Ni〉Co〉Pb〉Zn〉Cu〉Mn〉Cd. In the northern parts of the lake, especially at the inflow of drains and the Khoshk River of Shiraz City, metal concentrations are higher in both water and sediment samples. In order to assess the heavy metal enrichment in sediment samples, trace metal concentrations were normalized for Al. Except for Mn, all metals are enriched relative to average crust and average sedimentary rocks. Also, the results showed that stations located at the northern coast of the lake, have higher enrichment factors （EF） than the other stations. The results of this study showed that the Khoshk River and other drains are the main pollutant sources of the Maharluo Lake.