Energetics of two-ribbon solar flares

A theory of two-ribbon solar flares is presented which identifies the primary energy release site with the tops of the flare loops. The flare loops are formed by magnetic reconnection of a locally opened field configuration produced by the eruption of a pre-flare filament. Such eruptions are commonly observed about 15 min prior to the flare itself. It is proposed that the flare loops represent the primary energy release site even during the earliest phase of the flare, i.e., the flare loops are in fact the flare itself.Based upon the supposition that the energy release at the loop tops is in the form of Joulean dissipation of magnetic energy at the rising reconnection site, a quantitative model of the energy release process is developed based upon an analytic reconnecting magnetic field geometry believed to represent the basic process. Predicted curves of energy density vs time are compared with X-ray observations taken aboard Skylab for the events of 29 July, 13 August, and 21 August in 1973. Considering the crudity of the model, the comparisons appear reasonable. The predicted field strengths necessary to produce the observed energy density curves are also reasonable, being in the range 100–1000 G.The National Center for Atmospheric Research is sponsored by the National Science Foundation.     

Companion Event and Precursor of the X17 Flare on 28 October 2003

A major two-ribbon X17 flare occurred on 28 October 2003, starting at 11:01 UT in active region NOAA 10486. This flare was accompanied by the eruption of a filament and by one of the fastest halo coronal mass ejections registered during the October–November 2003 strong activity period. We focus on the analysis of magnetic field (SOHO/MDI), chromospheric (NainiTal observatory and TRACE), and coronal (TRACE) data obtained before and during the 28 October event. By combining our data analysis with a model of the coronal magnetic field, we concentrate on the study of two events starting before the main flare. One of these events, evident in TRACE images around one hour prior to the main flare, involves a localized magnetic reconnection process associated with the presence of a coronal magnetic null point. This event extends as long as the major flare and we conclude that it is independent from it. A second event, visible in Hα and TRACE images, simultaneous with the previous one, involves a large-scale quadrupolar reconnection process that contributes to decrease the magnetic field tension in the overlaying field configuration; this allows the filament to erupt in a way similar to that proposed by the breakout model, but with magnetic reconnection occurring at Quasi-Separatrix Layers (QSLs) rather than at a magnetic null point. Electronic supplementary material Electronic supplementary material is available for this article at and accessible for authorised users.     

Evidence of Magnetic Reconnection in Solar Flares and a Unified Model of Flares

The solar X-ray observing satellite Yohkoh has discovered various new dynamic features in solar flares and corona, e.g., cusp-shaped flare loops, above-the-loop-top hard X-ray sources, X-ray plasmoid ejections from impulsive flares, transient brightenings (spatially resolved microflares), X-ray jets, large scale arcade formation associated with filament eruption or coronal mass ejections, and so on. It has soon become clear that many of these features are closely related to magnetic reconnection. We can now say that Yohkoh established (at least phenomenologically) the magnetic reconnection model of flares. In this paper, we review various evidence of magnetic reconnection in solar flares and corona, and present unified model of flares on the basis of these new Yohkoh observations. This revised version was published online in July 2006 with corrections to the Cover Date.     

Implications of solar flare dynamics for reconnection in magnetospheric substorms

From observations of two-ribbon solar flares, we present a new line of evidence that magnetic reconnection is of key importance in magnetospheric substorms. We infer that in substorms reconnection of closed field lines in the near-Earth thinned plasma sheet both initiates and is driven by the overall MHD instability that drives the tailward expulsion of the reconnected closed field (0 loops). The general basis for this inference is the longstanding notion that two-ribbon flares and substorms are essentially similar phenomena, driven by similar processes. We give an array of observed similarities that substantiate this view. More specifically, our inference for substorms is drawn from observations of filament eruptions in two-ribbon flares, from which we conclude that the heart of the overall instability consists of reconnection and eruption of the closed magnetic field in and around the filament. We propose that essentially the same overall instability operates in substorms. Our point is not that the magnetic field configuration or the microphysics in substorms is identical to that in two-ribbon flares, but that the overall instability results from essentially the same combination of reconnection and eruption of closed magnetic field.     

Interaction of an Erupting Filament with the Ambient Magnetoplasma and Escape of Electron Beams

A huge filament eruption of 12 September 2000 associated with a two-ribbon spotless flare is described. During the acceleration phase the shape of the filament changed, and signatures of topological restructuring of large-scale coronal magnetic fields were inferred by tracking changes of nearby coronal holes. At the same time electron beams associated with the flare impulsive phase escaped into interplanetary space. Based on the time–spatial relationships a hypothesis is put forward, according to which the reconnection between the arcade magnetic field and the ambient field provides a temporary link between the open field lines and the flare energy release site, enabling the escape of electron beams into interplanetary space.     

Evolution of fibrils with special reference to flare activity

We show observational results on the pre-flare evolutions of H structures as well as the developments of H flares. It is shown that the chromospheric features are brought to a sheared state before flares due to motions of footpoints which correspond to particular sunspot motions. Generally in evolutions of the chromospheric features it is found that motions and reconnections of the footpoints play essential roles. The following three stages are found for development of the neutral line filament before flares: (1) formation of a filament as a result of reconnection; (2) increase of the shear of the filament due to the shear motion; and (3) reconnection of fine components of the filament to form an elongated component immediately before flares. We further show developments of two particular flares with and without the filament, and point out basic release processes of flares. The flare that occurred at the filament (July 5, 1974) started with the activation of the elongated component of the filament after the process (3). The main phase of a two-ribbon flare is considered as the rises of short components of the filament triggered by the rising motion of the elongated component. The flare of September 10, 1974 occurred at the region where fibrils connect the sunspots in distorted form. Pre-flare distortion was produced by translational rotation of the sunspot. Development of this two-ribbon flare is interpreted as being due to successive rises of the fibrils with a self-trigger mechanism.On leave from Tokyo Astronomical Observatory (present address).     

The ‘melon-seed’ mechanism and coronal transients

Adopting the point of view that a coronal transient is a defined magnetic structure, it must be diamagnetic with respect to the external ambient magnetic field, i.e., the external field lines cannot penetrate the structure. If this is so, an integral approach involving only external forces can be very useful for studying the conditions for acceleration and large-scale dynamical behavior of the transient.After a discussion of a suggested transient configuration based upon observations of prominences, flare loops, and transient - filament relative orientations observed by Trottet and MacQueen (1980), we demonstrate the diamagnetic approach to this problem through a particularly simplified model. Necessary conditions for upward acceleration of the transient are discussed in some detail. One such plausible initiation mechanism is shown to be a constriction of the structure near its base by the external forces. This mechanism not only can provide the upward acceleration for the transient but is also compatible with the observation of hot rising flare loops during two-ribbon flare which show evidence for magnetic reconnection.We have studied the equilibrium conditions and dynamical behavior of the transient using this mechanism for two limiting cases - that in which the gas pressure in the structure dominates over the magnetic pressure and that in which the magnetic pressure dominates. For both cases, the required equilibrium conditions are compatible with observed coronal parameters. The dynamical behavior upon inward constriction, however, resembles the observed characteristics for transients best for the magnetically dominated case. For example, in the pressure-dominated case, the required temperatures for acceleration appear somewhat high being in excess of about 1.9 × 10⁶ K. If, in addition, the internal temperature declines adiabatically during the outward motion, the structure does not reach inifinity unless its initial temperature exceeds about 3 × 10⁶ K but stops a some radial distance, returns to the Sun only to be accelerated outward again in the same fashion. The rather stringent requirements on internal temperature for the pressure-dominated case in addition to the expectation that pressure-dominated transients should evolve into a thin pencil shape instead of maintaining an approximately self-similar profile as observed are strong arguments in favor of the magnetically dominated case.Based upon the above results, we suggest that the reconnection process evidenced in two-ribbon flares may not necessarily be the result of the relaxation of a locally open field configuration produced by the transient as described by Kopp and Pneuman (1976) but, instead, that the acceleration of the transient and the two-ribbon flare both may be produced by a common force, namely that provided by the constricting effect of the external magnetic field displaced by the presence of the structure.The National Center for Atmospheric Research is sponsored by the National Science Foundation.     

3-D Magnetic Field Configuration Late in a Large Two-Ribbon Flare

We present H and coronal X-ray images of the large two-ribbon flare of 25–26 June, 1992 during its long-lasting gradual decay phase. From these observations we deduce that the 3-D magnetic field configuration late in this flare was similar to that at and before the onset of such large eruptive bipolar flares: the sheared core field running under and out of the flare arcade was S-shaped, and at least one elbow of the S looped into the low corona. From previous observations of filament-eruption flares, we infer that such core-field coronal elbows, though rarely observed, are probably a common feature of the 3-D magnetic field configuration late in large two-ribbon flares. The rare circumstance that apparently resulted in a coronal elbow of the core field being visible in H in our flare was the occurrence of a series of subflares low in the core field under the late-phase arcade of the large flare; these subflares probably produced flaring arches in the northern coronal elbow, thereby rendering this elbow visible in H. The observed late-phase 3-D field configuration presented here, together with the recent sheared-core bipolar magnetic field model of Antiochos, Dahlburg, and Klimchuk (1994) and recent Yohkoh SXT observations of the coronal magnetic field configuration at and before the onset of large eruptive bipolar flares, supports the seminal 3-D model for eruptive two-ribbon flares proposed by Hirayama (1974), with three modifications: (1) the preflare magnetic field is closed over the filament-holding core field; (2) the preflare core field has the shape of an S (or backward S) with coronal elbows; (3) a lower part of the core field does not erupt and open, but remains closed throughout flare, and can have prominent coronal elbows. In this picture, the rest of the core field, the upper part, does erupt and open along with the preflare arcade envelope field in which it rides; the flare arcade is formed by reconnection that begins in the middle of the core field at the start of the eruption and progresses from reconnecting closed core field early in the flare to reconnecting opened envelope field late in the flare.     

A Filament—Associated Halo Coronal Mass Ejection

1 INTRODUCTIONCoronal majss ejections (CMEs) are often seen as spectacular eruptions of matter fromthe Sun which propagate outward through the heliosphere and often interact with the Earth'smagnetosphere (Hundhausen, 1997; Gosling, 1997; and references herein). It is well known thatthese interactions can have substalltial consequences on the geomagnetic environment of theEarth, sometimes resulting in damage to satellites (e.g., McAllister et al., 1996; Berdichevskyet al., 1998). CMEs…     

Magnetic interactions during sympathetic solar eruptions

We present the first evidence for occurrences of magnetic interactions between a jet, a filament and coronal loops during a complex event, in which two flares sequen-tially occurred at different positions of the same active region and were closely associated with two successive coronal mass ejections (CMEs), respectively. The coronal loops were located outside but nearby the filament channel before the flares. The jet, originating from the first flare during its rise phase, not only hit the filament body but also met one of the ends of the loops. The filament then underwent an inclined eruption followed by the second flare and met the same loop end once more. Both the jet and the filament erup- tion were accompanied by the development of loop disturbances and the appearances of brightenings around the meeting site. In particular, the erupting filament showed clear manifestations of interactions with the loops. After a short holdup, only its portion passed through this site, while the other portion remained at the same place. Following the fila-ment eruption and the loop disappearance, four dimmings were formed and located near their four ends. This is a situation that we define as "quadrupolar dimmings." It appears that the two flares consisted of a sympathetic pair physically linked by the interaction between the jet and the filament, and their sympathy indicated that of the two CMEs.Moreover, it is very likely that the two sympathetic CMEs were simultaneously associ-ated with the disappearing loops and the quadrupole dimmings.     

Filament Eruption in NOAA 11093 Leading to a Two-Ribbon M1.0 Class Flare and CME

We present a multi-wavelength analysis of an eruption event that occurred in active region NOAA 11093 on 7 August 2010, using data obtained from SDO, STEREO, RHESSI, and the GONG Hα network telescope. From these observations, we inferred that an upward slow rising motion of an inverse S-shaped filament lying along the polarity inversion line resulted in a CME subsequent to a two-ribbon flare. Interaction of overlying field lines across the filament with the side-lobe field lines, associated EUV brightening, and flux emergence/cancelation around the filament were the observational signatures of the processes leading to its destabilization and the onset of eruption. Moreover, the time profile of the rising motion of the filament/flux rope corresponded well with flare characteristics, viz., the reconnection rate and hard X-ray emission profiles. The flux rope was accelerated to the maximum velocity as a CME at the peak phase of the flare, followed by deceleration to an average velocity of 590 km s⁻¹. We suggest that the observed emergence/cancelation of magnetic fluxes near the filament caused it to rise, resulting in the tethers to cut and reconnection to take place beneath the filament; in agreement with the tether-cutting model. The corresponding increase/decrease in positive/negative photospheric fluxes found in the post-peak phase of the eruption provides unambiguous evidence of reconnection as a consequence of tether cutting.     

Interpretation of the observed motions of hard X-ray sources in solar flares

In connection with the RHESSI satellite observations of solar flares, which have revealed new properties of hard X-ray sources during flares, we offer an interpretation of these properties. The observed motions of coronal and chromospheric sources are shown to be the consequences of three-dimensional magnetic reconnection at the separator in the corona. During the first (initial) flare phase, the reconnection process releases an excess of magnetic energy related predominantly to themagnetic tensions produced before the flare by shear plasma flows in the photosphere. The relaxation of a magnetic shear in the corona also explains the downward motion of the coronal source and the decrease in the separation between chromospheric sources. During the second (main) flare phase, ordinary reconnection dominates; it describes the energy release in the terms of the “standard model” of large eruptive flares accompanied by the rise of the coronal source and an increase in the separation between chromospheric sources.     

Multi-wavelength observations of an X-class flare without a coronal mass ejection.

Developments in our knowledge of coronal mass ejections (CMEs) have shown that many of these transients occur in association with solar flares. On the occasions when there is a common occurrence of the eruption and the flare, it is most likely that the flare is of high intensity and/or long-duration (Burkepile, Hundhausen, and Webb, 1994; Munro et al., 1979; Webb and Hundhausen, 1987). A model for the relationship between the long-duration event and eruption has been developed (Carmichael, 1964; Sturrock, 1966; Hirayama, 1974; Kopp and Pneuman, 1976), but not so for the high-intensity flares and eruptions. This work investigates the magnetic topology changes that occur for a X1.2 GOES classification flare which has no associated CME. It is found that the flare is likely to result from the interaction between two pre-existing loops low in the corona, producing a confined flare. Slightly higher in the corona, a loop is observed which exhibits an outward motion as a result of the reconfiguration during reconnection. The objective of this work is to gain insight on the magnetic topology of the event which is critical in order to determine whether a high-intensity flare is likely to be related to a CME or not.     

The magnetic nature of solar flares

The main challenge for the theory of solar eruptions has been to understand two basic aspects of large flares. These are the cause of the flare itself and the nature of the morphological features which form during its evolution. Such features include separating ribbons of H emission joined by a rising arcade of soft x-ray loops, with hard x-ray emission at their summits and at their feet. Two major advances in our understanding of the theory of solar flares have recently occurred. The first is the realisation that a magnetohydrodynamic (MHD) catastrophe is probably responsible for the basic eruption and the second is that the eruption is likely to drive a reconnection process in the field lines stretched out by the eruption. The reconnection is responsible for the ribbons and the set of rising soft x-ray loops, and such a process is well supported by numerical experiments and detailed observations from the Japanese satellite Yohkoh. Magnetic energy conversion by reconnection in two dimensions is relatively well understood, but in three dimensions we are only starting to understand the complexity of the magnetic topology and the MHD dynamics which are involved. How the dynamics lead to particle acceleration is even less well understood. Particle acceleration in flares may in principle occur in a variety of ways, such as stochastic acceleration by MHD turbulence, acceleration by direct electric fields at the reconnection site, or diffusive shock acceleration at the different kinds of MHD shock waves that are produced during the flare. However, which of these processes is most important for producing the energetic particles that strike the solar surface remains a mystery. Received 2 January 2001 / Published online 17 July 2001     

X-ray,Hα, and radio observations of the two-ribbon flare of 16 May, 1981

The paper is a contribution to the study of two-ribbon flares. A variety of observational material, i.e. Hα pictures, radio spectrum in the frequency band of 150–1000 MHz, radio map at 6 cm, fluxes at other frequencies, magnetograms and X-ray flux in a broad energy interval, enabled us to study the development of the 16 May, 1981 flare. The onset of the flare could be described by the model of Van Tend and Kuperus. A diminishing of the magnetic shear during the activation of the filament was observed. From radio and X-ray data it was found that pulsed acceleration took place in the region under the rising filament, the electrons propagating in a limited region both upwards to greater heights and downwards into the footpoints. Internal oscillations of the filament were observed. A manifestation of the primary process of interplanetary shock-wave generation was found. The 6 cm radio sources could be localized in the footpoints of magnetic loops.     

A theory of filament eruptions before the impulsive phase of solar flares

We present a theory of filament eruption before the impulsive phase of solar flares. We show that the upward motion of the magnetic X-point tracing the filament eruption begins several minutes before the impulsive phase of the flare, where the explosive magnetic reconnection starts at the X-point magnetic field configuration located under the filament. No change occurs in the character of the motion of the X-point during the onset of the explosive magnetic reconnection. The upward speed of the X-point is about 110 km s^-1 at the onset of the impulsive phase. We give an important condition leading to filament eruptions, which relate to the state of the current sheet under the filament, where the magnetic energy can be released.     

The surge-like eruption of a miniature filament associated with circular flare ribbon

We present a study of a mini-filament erupting in association with a circular ribbon flare observed by NVST and SDO/AIA on 2014 March 17. The filament was located at one footpoint region of a large loops. The potential field extrapolation shows that it was embedded under a magnetic null point configuration. First, we observed a brightening of the filament at the corresponding EUV images, close to one end of the filament. With time evolution, a circular flare ribbon was observed around the filament at the onset of the eruption, which is regarded as a signature of reconnection at the null point. After the filament activation, its eruption took the form of a surge, which ejected along one end of a large-scale closed coronal loops with a curtain-like shape. We conjecture that the null point reconnection may facilitate the eruption of the filament.     

He I 10830 observations of the 3N/M4.0 flare of 4 September, 1982

Hei 10830 Å spectroheliograms of a major 3N two-ribbon flare occurring in Boulder Region 3885/3886 early on 4 September, 1982 are discussed and compared with H and soft X-ray observations of the event. This flare, observed for more than 60 hr in Hei 10830, was associated with the eruption of a large filament in the active region complex, the formation of coronal holes, a long-duration soft X-ray event, and was the probable source of a earthward coronal mass ejection and the largest geomagnetic storm of this solar cycle. The results of this study suggest the Hei flare is a chromospheric manifestation of the X-ray coronal loop structures associated with flares.Visitor, National Solar Observatory, operated by the Association of Universities for Research in Astronomy, Inc., under contract with the National Science Foundation.     

Stereoscopic Analysis of the 19 May 2007 Erupting Filament

A filament eruption, accompanied by a B9.5 flare, coronal dimming, and an EUV wave, was observed by the Solar TERrestrial Relations Observatory (STEREO) on 19 May 2007, beginning at about 13:00 UT. Here, we use observations from the SECCHI/EUVI telescopes and other solar observations to analyze the behavior and geometry of the filament before and during the eruption. At this time, STEREO A and B were separated by about 8.5°, sufficient to determine the three-dimensional structure of the filament using stereoscopy. The filament could be followed in SECCHI/EUVI 304 Å stereoscopic data from about 12 hours before to about 2 hours after the eruption, allowing us to determine the 3D trajectory of the erupting filament. From the 3D reconstructions of the filament and the chromospheric ribbons in the early stage of the eruption, simultaneous heating of both the rising filamentary material and the chromosphere directly below is observed, consistent with an eruption resulting from magnetic reconnection below the filament. Comparisons of the filament during eruption in 304 Å and Hα? show that when it becomes emissive in He II, it tends to disappear in Hα?, indicating that the disappearance probably results from heating or motion, not loss, of filamentary material.