Tectonics at the intersection of the East Pacific Rise with Tamayo Transform fault

During the Fall of 1979, a manned submersible program, utilizing DSRV ALVIN, was carried out at the intersection of the East Pacific Rise (EPR) with the Tamayo Transform boundary. A total of seven dives were completed in the vicinity of the EPR/Tamayo intersection depression and documented the geologic relationships that characterize the juxtaposition of these types of plate boundaries. The young volcanic terrain of the EPR axis can be traced into and across the Tamayo Transform valley but becomes buried by sedimentary talus that is being shed from sediment scarps along the unstable sediment slope that defines the north side of the intersection depression. Within 4 km of the transform boundary, the dominant trend (000°) of the fissures and faults that disrupt the rise-generated volcanics is markedly oblique to the regional direction of sea floor spreading (120°). Since no evidence was found to suggest that these structures accommodate significant amounts of strike-slip displacement, they are taken to reflect a distortion of the EPR extensional tectonic regime by a transform generated shear couple. The floor of the Tamayo Transform valley in this area is inundated by mass-wasted sediment, and the principal transform displacement zone is characterized at the surface by a narrow (<1.5 km) interval of fault scarps in sediment that trends parallel with the transform valley. Extrapolated to the west, this zone links with zones of transform deformation investigated during earlier submersible studies (CYAMEX and Pastouret, 1981). Evidence of low-level hydrothermal discharge was seen at one locality on the EPR axis and at another 8 km west of the axis at the edge of the zone of transform deformation.     

The morphology and tectonics of the Mark area from Sea Beam and Sea MARC I observations (Mid-Atlantic Ridge 23° N)

High-resolution Sea Beam bathymetry and Sea MARC I side scan sonar data have been obtained in the MARK area, a 100-km-long portion of the Mid-Atlantic Ridge rift valley south of the Kane Fracture Zone. These data reveal a surprisingly complex rift valley structure that is composed of two distinct spreading cells which overlap to create a small, zero-offset transform or discordant zone. The northern spreading cell consists of a magmatically robust, active ridge segment 40–50 km in length that extends from the eastern Kane ridge-transform intersection south to about 23°12′ N. The rift valley in this area is dominated by a large constructional volcanic ridge that creates 200–500 m of relief and is associated with high-temperature hydrothermal activity. The southern spreading cell is characterized by a NNE-trending band of small (50–200 m high), conical volcanos that are built upon relatively old, fissured and sediment-covered lavas, and which in some cases are themselves fissured and faulted. This cell appears to be in a predominantly extensional phase with only small, isolated eruptions. These two spreading cells overlap in an anomalous zone between 23°05′ N and 23°17′ N that lacks a well-developed rift valley or neovolcanic zone, and may represent a slow-spreading ridge analogue to the overlapping spreading centers found at the East Pacific Rise. Despite the complexity of the MARK area, volcanic and tectonic activity appears to be confined to the 10–17 km wide rift valley floor. Block faulting along near-vertical, small-offset normal faults, accompanied by minor amounts of back-tilting (generally less than 5°), begins within a few km of the ridge axis and is largely completed by the time the crust is transported up into the rift valley walls. Features that appear to be constructional volcanic ridges formed in the median valley are preserved largely intact in the rift mountains. Mass-wasting and gullying of scarp faces, and sedimentation which buries low-relief seafloor features, are the major geological processes occurring outside of the rift valley. The morphological and structural heterogeneity within the MARK rift valley and in the flanking rift mountains documented in this study are largely the product of two spreading cells that evolve independently to the interplay between extensional tectonism and episodic variations in magma production rates.     

Geologic controls of hydrothermal activity in the Mid-Atlantic Ridge rift valley: Tectonics and volcanics

The rift valley at three widely separated sites along the Mid-Atlantic Ridge is characterized using geological and geophysical data. An analysis of bottom photographs and fine-scale bathymetry indicates that each study area has a unique detailed geology and structure. Spreading rates are apparently asymmetric at each site. Relationships between tectonic and volcanic structure and hydrothermal activity show that various stages in the evolution of the rift valley are most favorable for seafloor expression of hydrothermal activity. In a stage found at 26°08 N, site 1 (TAG), the rift valley is narrow, consisting of both a narrow volcanically active valley floor and inner walls with small overall slopes. High-temperature hydrothermal venting occurs along the faster spreading eastern inner wall of this U-shaped rift valley. Site 2 (16°46 N) has a narrow valley floor and wide block faulted walls and is at a stage where the rift valley is characterized by a V-shape. No neovolcanic zone is observed within the marginally faulted, predominantly sedimented floor and hydrothermal activity is not observed. The rift valley at site 3 (14°54 N), with postulated extrusive volcanic activity and a stage in valley evolution tending toward a U-shape, shows evidence of hydrothermal activity within the slightly faster spreading eastern inner wall. Evidence for tectonic activity (inward- and outward-facing faults and pervasive fissuring) exists throughout the wide inner wall. Hydrothermal activity appears to be favored within a U-shaped rift valley characterized by a narrow neovolcanic zone and secondarily faulted inner walls.     

New Observations on the Distribution of Past and Present Hydrothermal Activity in the TAG Area of the Mid-Atlantic Ridge (26°08′ N)

Seafloor acoustic and photographic imagery combined with high- resolution bathymetry are used to investigate the geologic and tectonic relations between active and relict zones of hydrothermal venting in the TAG (Trans-Atlantic Geotraverse) hydrothermal field at 26°08N on the Mid-Atlantic Ridge (MAR). The TAG field consists of a large, currently active, high-temperature mound, two relict zones (the Alvin and Mir zones), and an active low-temperature zone. The active mound and the Alvin relict zone lie along a series of closely-spaced, axis-parallel (NNE-trending) faults in an area of active extension east of the neovolcanic zone. The Alvin zone extends for 2.5 km along these faults from the valley floor onto the eastern wall, and consists of at least five mounds identified using DSL-120 sidescan sonar and bathymetric data. The existence of sulfide structures on most of these mounds is verified with near-bottom electronic still camera (ESC) images from the Argo-II deep-towed vehicle, and is confirmed in at least one case with collected samples. Two of these mounds were previously unidentified. The existence of these mounds extends the length of the Alvin zone by ~0.5 km to the south. Much of the Alvin relict zone appears to be buried by debris from a large mass wasting event on the eastern wall of the median valley. The Mir zone, located on normal fault blocks of the eastern valley wall, cannot be clearly identified in the sidescan data and no structural connections from it to the active mound or Alvin zone can be discerned. The active mound is located at the intersection of an older oblique fault set with the younger axis- parallel faults which extend into the Alvin relict zone, and no fresh volcanics are observed in the vicinity of the mound. The fact that both the active mound and the Alvin relict zone lie along the same set of active, axis-parallel faults suggests that the faults may be a major control on the location of hydrothermal activity by providing pathways for fluid flow from a heat source at the ridge axis.     

Geophysical investigations over a segment of the Central Indian Ridge, Indian Ocean

 Swath bathymetric, gravity, and magnetic studies were carried out over a 55 km long segment of the Central Indian Ridge. The ridge is characterized by 12 to 15 km wide rift valley bounded by steep walls and prominent volcanic constructional ridges on either side of the central rift valley. A transform fault at 7°45′S displaces the ridge axis. A mantle Bouguer anomaly low of −14 mGals and shallowing of rift valley over the middle of the ridge segment indicate along axis crustal thickness variations. A poorly developed neovolcanic zone on the inner rift valley floor indicate dominance of tectonic extension. The off-axis volcanic ridgs suggest enhanced magmatic activity during the recent past. Received: 24 May 1996 / Rivision received: 13 January 1997     

The role of the Spitsbergen shear zone in determining morphology,segmentation and evolution of the Knipovich Ridge

In 1989–1990 the SeaMARC II side-looking sonar and swath bathymetric system imaged more than 80 000 km² of the seafloor in the Norwegian-Greenland Sea and southern Arctic Ocean. One of our main goals was to investigate the morphotectonic evolution of the ultra-slow spreading Knipovich Ridge from its oblique (115° ) intersection with the Mohns Ridge in the south to its boundary with the Molloy Transform Fault in the north, and to determine whether or not the ancient Spitsbergen Shear Zone continued to play any involvement in the rise axis evolution and segmentation. Structural evidence for ongoing northward rift propagation of the Mohns Ridge into the ancient Spitsbergen Shear Zone (forming the Knipovich Ridge in the process) includes ancient deactivated and migrated transforms, subtle V-shaped-oriented flank faults which have their apex at the present day Molloy Transform, and rift related faults that extend north of the present Molloy Transform Fault. The Knipovich Ridge is segmented into distinct elongate basins; the bathymetric inverse of the very-slow spreading Reykjanes Ridge to the south. Three major fault directions are detected: the N-S oriented rift walls, the highly oblique en-echelon faults, which reside in the rift valley, and the structures, defining the orientation of many of the axial highs, which are oblique to both the rift walls and the faults in the axial rift valley. The segmentation of this slow spreading center is dominated by quasi stationary, focused magma centers creating (axial highs) located between long oblique rift basins. Present day segment discontinuities on the Knipovich Ridge are aligned along highly oblique, probably strike-slip faults, which could have been created in response to rotating shear couples within zones of transtension across the multiple faults of the Spitsbergen Shear Zone. Fault interaction between major strike slip shears may have lead to the formation of en-echelon pull apart basins. The curved stress trajectories create arcuate faults and subsiding elongate basins while focusing most of the volcanism through the boundary faults. As a result, the Knipovich Ridge is characterized by Underlapping magma centers, with long oblique rifts. This style of basin-dominated segmentation probably evolved in a simple shear detachment fault environment which led to the extreme morphotectonic and geophysical asymmetries across the rise axis. The influence of the Spitsbergen Shear Zone on the evolution of the Knipovich Ridge is the primary reason that the segment discontinuities are predominantly volcanic. Fault orientation data suggest that different extension directions along the Knipovich Ridge and Mohns Ridge (280° vs. 330°, respectively) cause the crust on the western side of the intersection of these two ridges to buckle and uplift via compression as is evidenced by the uplifted western wall province and the large 60 mGal free air gravity anomalies in this area. In addition, the structural data suggest that the northwards propagation of the spreading center is ongoing and that a `normal' pure shear spreading regime has not evolved along this ridge. This revised version was published online in November 2006 with corrections to the Cover Date.     

The western intersection of Oceanographer fracture zone with the mid-Atlantic ridge

A survey across the western intersection of the mid-Atlantic ridge with Oceanographer fracture zone near 35°N shows this intersection to be different in character from its more typical eastern counterpart. At the western junction the transform valley broadens into a parallelogram shaped deep some 46 by 24 km, which extends well across the trace of the active transform. Within 30 km south of the fracture zone the median valley becomes oblique forming a NE trending ridge which is the SE edge of the deep. Magnetic mapping shows the current spreading centre to be adjacent to this ridge.A sequence of evolution for this intersection over the past 0.7 Ma is proposed to explain the features mapped. We suggest that the oblique ridge crest trends extended across the transform trace to form the elongated graben-like deep with its associated faults and sediment slumps. Such complex patterns may occur as plate-wide changes in spreading direction become modified by localised shear stress fields at ridge crest-transform intersections, as have been observed in a number of other cases. The absence of significant tranverse ridges across from the spreading centre at this particular fracture zone intersection, may have temporarily allowed these stress patterns to propagate across the fracture zone.     

A submersible study of the western intersection of the Mid-Atlantic ridge and Kane fracture zone (WMARK)

In 1994, a joint Japanese-American dive program utilizing the worlds deepest diving active research submersible (SHINKAI 6500) was carried out at the western ridge-transform intersection (RTI) of the Mid-Atlantic Ridge and Kane transform in the central North Atlantic Ocean. A total of 15 dives were completed along with surface-ship geophysical mapping of bathymetry, magnetic and gravity fields. Dives at the RTI traced the neovolcanic zone up to, and for a short distance (2.5 km) along, the Kane transform. At the RTI, the active trace of the transform is marked by a narrow valley (<50 m wide) that separates the recent lavas of the neovolcanic zone from the south wall of the transform. The south wall of the transform at the western RTI consists of a diabase section near its base between 5000 and 4600 m depth overlain by basaltic lavas, with no evidence of gabbro or deeper crustal rocks. The south wall is undergoing normal faulting with considerable strike-slip component. The lavas of the neovolcanic zone at the RTI are highly magnetized (17 A m^–1) compared to the lavas of the south wall (4 A m^–1), consistent with their age difference. The trace of the active transform changes eastwards into a prominent median ridge, which is composed of heavily sedimented and highly serpentinized peridotites. Submersible observations made from SHINKAI find that the western RTI of the Kane transform has a very different seafloor morphology and lithology compared to the eastern RTI. Large rounded massifs exposing lower crustal rocks are found on the inside corner of the eastern RTI whereas volcanic ridge and valley terrain with hooked ridges are found on the outside corner of the eastern RTI. The western RTI is much less asymmetric with both inside and outside corner crust showing a preponderance of volcanic terrain. The dominance of low-angle detachment faulting at the eastern RTI has resulted in a seafloor morphology and architecture that is diagnostic of the process whereas crust formed at the WMARK RTI must clearly be operating under a different set of conditions that suppresses the initiation of such faulting.     

Tectonics of ridge-transform intersections at the Kane fracture zone

The Kane Transform offsets spreading-center segments of the Mid-Atlantic Ridge by about 150 km at 24° N latitude. In terms of its first-order morphological, geological, and geophysical characteristics it appears to be typical of long-offset (>100 km), slow-slipping (2 cm yr^-1) ridge-ridge transform faults. High-resolution geological observations were made from deep-towed ANGUS photographs and the manned submersible ALVIN at the ridge-transform intersections and indicate similar relationships in these two regions. These data indicate that over a distance of about 20 km as the spreading axes approach the fracture zone, the two flanks of each ridge axis behave in very different ways. Along the flanks that intersect the active transform zone the rift valley floor deepens and the surface expression of volcanism becomes increasingly narrow and eventually absent at the intersection where only a sediment-covered ‘nodal basin’ exists. The adjacent median valley walls have structural trends that are oblique to both the ridge and the transform and have as much as 4 km of relief. These are tectonically active regions that have only a thin (<200 m), highly fractured, and discontinuous carapace of volcanic rocks overlying a variably deformed and metamorphosed assemblage of gabbroic rocks. Overprinting relationships reveal a complex history of crustal extension and rapid vertical uplift. In contrast, the opposing flanks of the ridge axes, that intersect the non-transform zones appear to be similar in many respects to those examined elsewhere along slow-spreading ridges. In general, a near-axial horst and graben terrain floored by relatively young volcanics passes laterally into median valley walls with a simple block-faulted character where only volcanic rocks have been found. Along strike toward the fracture zone, the youngest volcanics form linear constructional volcanic ridges that transect the entire width of the fracture zone valley. These volcanics are continuous with the older-looking, slightly faulted volcanic terrain that floors the non-transform fracture zone valleys. These observations document the asymmetric nature of seafloor spreading near ridge-transform intersections. An important implication is that the crust and lithosphere across different portions of the fracture zone will have different geological characteristics. Across the active transform zone two lithosphere plate edges formed at ridge-transform corners are faulted against one another. In the non-transform zones a relatively younger section of lithosphere that formed at a ridge-non-transform corner is welded to an older, deformed section that initially formed at a ridge-transform corner.     

The geology of the Oceanographer Transform: The transform domain

Three dives in submersible ALVIN and four deep-towed camera lowerings have been made along the transform valley of the Oceanographer Transform. These data constrain our understanding of the processes that create and shape the distinctive morphology that is characteristic of slowly slipping ridge-transform-ridge (RTR) plate boundaries. Our data suggest that the locus of strike-slip tectonism, called the transform fault zone (TFZ), is confined to a narrow swath (<4 km) that is centered along the axis of maximum depth. The TFZ is flanked by the inward facing slopes of the transform valley. The lower portions of the valley walls are characterized by broad sloping exposures of undisrupted sediment but at higher elevations the walls are made up of inward facing scarps and terraces of variable dimensions. Although the scarps have been badly degraded by mass wasting, there is no evidence to suggest that these scarps have accommodated significant amounts of strike-slip motion. Plutonic and ultramafic rocks are exposed on these scarps and the occurrence of this diverse assemblage on small-throw faults indicates that the crust is thin and/or discontinuous in this environment. We suggest that this complex igneous assemblage is the product of anomalous accretionary processes that are characteristic of slowly-slipping RTR plate boundaries.     

Tectonic and magmatic ridges in the eltanin fault system,South Pacific

A Seabeam reconnaissance of the 400 km-long fast-slipping (88 mm yr^-1) Heezen transform fault zone and the 55 km-long spreading center that links it to Tharp transform defined and bathymetrically described several types of ridges built by tectonic uplift and volcanic construction. Most prominent is an asymmetric transverse ridge, at which abyssal hills adjacent to the fault zone have been raised 2–3 km above normal rise-flank depths. Topographic and petrologic evidence suggests that this uplift, which has produced a 5400 m scarp from the crest of the ridge to the floor of a 10 km-wide transform valley, is caused by rapid serpentinization of upper mantle which has been exposed to hydrothermal circulation by fault-zone fracturing of an unusually thin crust. Transverse ridges have been thought atypical of fast-slipping transforms. One class of volcanic ridge more common at these sites is the overshot ridge, formed by prolongation of spreading-center rift zones obliquely across the transform. Overshot ridges are well developed at Heezen transform, especially at the eastern end where an eruptive rift zone extending 60 km from the southern tip of the East Pacific Rise has built a transform-parallel ridge that fills the eastern transform valley. Obliteration of fault-zone structure by ridges overshooting from the spreading center intersections means that the topography of the aseismic fracture zones is not just inherited from that of the active transform fault zone. The latter has several en echelon and overlapping fault traces, linked by short oblique spreading axes that generally form pull-apart basins rather than volcanic ridges. Interpretation of the origin and pattern of the fault zone's tectonic and volcanic relief requires refinement of the plate geography and history of this part of the Pacific-Antarctic boundary, using new Seabeam and magnetic traverses to supplement and adjust the existing geophysical data base.     

Spreading rate dependence of morphological characteristics in global oceanic transform faults

We quantified the systematic variations in global transform fault morphology, revealing a first-order dependence on the spreading rate.(1) The average age offset of both the full transform and transform sub-segments decrease with increasing spreading rate.(2) The average depth of both the transform valley and adjacent ridges are smaller in the fast compared to the slow systems, reflecting possibly density anomalies associated with warmer mantle at the fast systems and rifting at the slow ridges. However, the average depth difference between the transform valley and adjacent ridges is relatively constant from the fast to slow systems.(3) The nodal basin at a ridge-transform intersection is deeper and dominant at the ultraslow and slow systems, possibly reflecting a lower magma supply and stronger viscous resistance to mantle upwelling near a colder transform wall. In contrast, the nodal high, is most prominent in the fast, intermediate, and hotspot-influenced systems, where robust axial volcanic ridges extend toward the ridge-transform intersection.(4) Statistically, the average transform valley is wider at a transform system of larger age offset, reflecting thicker deforming plates flanking the transform fault.(5) The maximum magnitude of the transform earthquakes increases with age offset owing to an increase in the seismogenic area. Individual transform faults also exhibit significant anomalies owing to the complex local tectonic and magmatic processes.     

A geological transect across the crest of the East Pacific Rise at 21°N latitude made from the deep submersible ALVIN

This paper is a report of geological observations made using the submersible ALVIN on the crest of the East Pacific Rise near 21°N. The profile is 6 km long and crosses a 5–10 km wide plateau which rises 100 m±above the rise flanks. At the axis are exposed fresh glassy pillow lavas with no sediment accumulation in a region termed the neovolcanic zone. This zone is about one kilometer wide and includes elongate ridges of pillow lavas and seventeen hydrothermal vent fields in the study area. Outside the neovolcanic zone the seafloor is extensively fissured in another zone which is up to two kilometers wide. The neovolcanic zone and the fissured zone are included within a rift valley or graben about 3 to 5 km wide and 50 m±deep. This rift valley is asymmetrically located on the west side of the axial plateau; the neovolcanic zone in the study area is asymmetrically located on the east side of the rift graben. Fissured crust is not common outside the rift graben or in the neovolcanic zone; similarly, large throw faults such as those which form the edges of the graben are not found outside of it. These observations can be interpreted according to a volcanic-tectonic cycle in which volcanic eruptions and hydrothermal circulation are followed by a tectonic phase which includes fissuring and vertical movements. When a new cycle starts it may involve a lateral shift of the spreading axis. Lavas along the dive profile are suggested to be no older than a few thousand years based on sediment accumulation. In contrast, seafloor spreading rates here predict crust up to 10⁵ yr old. This observation suggests that lavas from the neovolcanic zone can spread laterally about a kilometer or more and overlap on older crust.     

Deep tow studies of the Tamayo transform fault

The Tamayo transform fault occurs at the north end of the East Pacific Rise where it enters the Gulf of California. The two deep-tow surveys reported here show that the transform fault zone changes significantly as a function of distance from the spreading center intersections. At site 1, near the intersection, one side of the fault is young and the fault zone is narrow and well-defined. Strike slip occurs in a zone approximately 1-km wide suggesting a correspondingly narrow zone of decoupling between the Pacific and North American plates. On the young side of the strike-slip zone, normal faults occur along shear zones which are 45°–50° oblique to the transform strike. They occur parallel to the short axis of the strain ellipse for transform fault strain here, i.e., perpendicular to the least compressive stress. The transform walls are formed by normal faulting as has been pointed out in previous detailed surveys. Here, however, the age contrast of 2.5 m.y. across the transform valley is apparent in the morphology of the normal fault scarps. While the scarps are steep and well-defined on the young side, the scarps on the older side have gradual 10°–30° slopes and appear to be primarily talus ramps. Apparently, the scarps have been tectonically eroded by continued strike slip activity after the initial stages of normal faulting. Thus, transform valleys should be quite asymmetric in cross-section where there is a significant age contrast and one side is less than approximately 0.5 m.y. old. Also, along older sections of the transform valley walls, normal faulting may not be at all obvious due to degradation of the scarps by tectonic erosion. This phenomenon makes the likelihood of transform faults providing windows into the oceanic crust most unlikely except in special cases.The picture of transform deformation is more complex at site 2 in the central portion of the fault where both sides of the fault are greater than 1 m.y. old. Here the transform valley is wider (25–30 km as opposed to 2–5 km). There is no clear simple zone of strike slip tectonics. In fact, the only clear evidence for deformation is the intrusion of magmatic or serpentinite diapirs through the sediments of the transform valley floor. The diapirs have deformed the turbidite layers flooring the valley and in one carefully studied case the turbidite sequence has been uplifted, perched atop the diapir. The pattern of deformation on this outcropping diapir shows radial and concentric fractures which can be modeled by a vertical intrusion circular in plan view. Magnetic studies limit the possible composition to basalt or serpentinite. A 60-km-long median ridge is also likely to be the product of intrusion along the transform fault. The survey at site 2 pointed out the importance of vertical tectonics in the transform valley floor and in particular the importance of diapiric intrusions of either basaltic or serpentinite composition.Based on initial boundary conditions and present tectonic elements in the Tamayo fault zone, a possible history of the mouth of the Gulf of California is outlined. The median ridge was emplaced starting approximately 0.8 m.y. ago by regional extension across the transform fault, the result of leaky transform faulting. The diapirs occur along a possible relay zone of extension midway along the fault which began approximately 0.15 m.y. ago. The extension in this case is parallel to the trend of the transform fault, is still occurring at present, and may evolve into a true spreading center.Contribution of the Scripps Institution of Oceanography, new series.     

Origin and development of the morphological structure of the rift zone of slow-spreading mid-ocean ridges

Due to the complex transformation of the Earth’s crust in the rift valley, the morphology of the newly formed crust is changed by that of the province of rift mountains. The main factors of the variability of the morphological structure are as follows: the tectonomagmatic cyclicity of the geodynamic processes at the spreading centers and the isostatic uplift of the rift valley floor. The interchange of magmatic and tectonic cycles determines the difference in the bathymetric levels of the isostatic equilibrium at the edges of the rift valley slopes and the beginning of the formation of the topography of the province of rift mountains. This relief represents an indepth system of ridges and valleys rhythmically interchanging in the lateral direction. The morphology of the province of rift mountaines becomes the morphology of the acoustic basement throughout the ocean floor, except for the continental margins and areas of intraplate tectonics and volcanism.     

Morphology and crustal structure of a small transform fault along the Mid-Atlantic Ridge: The Atlantis Fracture Zone

The Atlantis Fracture Zone (30° N) is one of the smallest transform faults along the Mid-Atlantic Ridge with a spatial offset of 70 km and an age offset of ~ 6 Ma. The morphology of the Atlantis Fracture Zone is typical of that of slow-slipping transforms. The transform valley is 15–20 km wide and 2–4 km deep. The locus of strike-slip deformation is confined to a narrow band a few kilometers wide. Terrain created at the outside corners of the transform is characterized by ridges which curve toward the ridge-transform intersections and depressions which resemble nodal basins. Hooked ridges are not observed on the transform side of the ridge-transform intersections. Results of the three-dimensional inversion of the surface magnetic field over our survey area suggest that accretionary processes are sufficiently organized within 3–4 km of the transform fault to produce lineated magnetic anomalies. The magnetization solution further documents a 15-km, westward relocation of the axis of accretion immediately south of the transform about 0.25 Ma ago. The Atlantis Transform is associated with a band of high mantle Bouguer anomalies, suggesting the presence of high densities in the crust and/or mantle along the transform, or anomalously thin crust beneath the transform. Assuming that all the mantle Bouguer anomalies are due to crustal thickness variations, we calculate that the crust may be 2–3 km thinner than a reference 6-km thickness beneath the transform valley, and 2–3 km thicker beneath the mid-points of the spreading segments which bound the transform. Our results indicate that crustal thinning is not uniform along the strike of the fracture zone. Based on studies of the state of compensation of the transform, we conclude that the depth anomaly associated with the fracture zone valley is not compensated everywhere by thin crust. Instead, the regional relationship between bathymetry and gravity is best explained by compensation with an elastic plate with an effective thickness of ~ 4 km or greater. However, the remaining isostatic anomalies indicate that there are large variations away from this simple model which are likely due to variations in crustal thickness and density near the transform.     

Tectonics of an extinct ridge-transform intersection,Drake Passage (Antarctica)

New swath bathymetric, multichannel seismic and magnetic data reveal the complexity of the intersection between the extinct West Scotia Ridge (WSR) and the Shackleton Fracture Zone (SFZ), a first-order NW-SE trending high-relief ridge cutting across the Drake Passage. The SFZ is composed of shallow, ridge segments and depressions, largely parallel to the fracture zone with an `en echelon' pattern in plan view. These features are bounded by tectonic lineaments, interpreted as faults. The axial valley of the spreading center intersects the fracture zone in a complex area of deformation, where N120° E lineaments and E–W faults anastomose on both sides of the intersection. The fracture zone developed within an extensional regime, which facilitated the formation of oceanic transverse ridges parallel to the fracture zone and depressions attributed to pull-apart basins, bounded by normal and strike-slip faults.On the multichannel seismic (MCS) profiles, the igneous crust is well stratified, with numerous discontinuous high-amplitude reflectors and many irregular diffractions at the top, and a thicker layer below. The latter has sparse and weak reflectors, although it locally contains strong, dipping reflections. A bright, slightly undulating reflector observed below the spreading center axial valley at about 0.75 s (twt) depth in the igneous crust is interpreted as an indication of the relict axial magma chamber. Deep, high-amplitude subhorizontal and slightly dipping reflections are observed between 1.8 and 3.2 s (twt) below sea floor, but are preferentially located at about 2.8–3.0 s (twt) depth. Where these reflections are more continuous they may represent the Mohorovicic seismic discontinuity. More locally, short (2–3 km long), very high-amplitude reflections observed at 3.6 and 4.3 s (twt) depth below sea floor are attributed to an interlayered upper mantle transition zone. The MCS profiles also show a pattern of regularly spaced, steep-inclined reflectors, which cut across layers 2 and 3 of the oceanic crust. These reflectors are attributed to deformation under a transpressional regime that developed along the SFZ, shortly after spreading ceased at the WSR. Magnetic anomalies 5 to 5 E may be confidently identified on the flanks of the WSR. Our spreading model assumes slow rates (ca. 10–20 mm/yr), with slight asymmetries favoring the southeastern flank between 5C and 5, and the northwestern flank between 5 and extinction. The spreading rate asymmetry means that accretion was slower during formation of the steeper, shallower, southeastern flank than of the northwestern flank.     

Structural differences between the western and eastern Qiongdongnan Basin: evidence of Indochina block extrusion and South China Sea seafloor spreading

Located at the intersection between a NW-trending slip system and NE-trending rift system in the northern South China Sea, the Qiongdongnan Basin provides key clues for us to understand the proposed extrusion of the Indochina Block along with Red River Fault Zone and extensional margins. In this paper we for the first time systematically reveal the striking structural differences between the western and eastern sector of the Qiongdongnan Basin. Influenced by the NW-trending slip faults, the western Qiongdongnan Basin developed E–W-trending faults, and was subsequently inverted at 30–21 Ma. The eastern sector was dominated by faults with NE orientation before 30 Ma, and thereafter with various orientations from NE, to EW and NW during the period 30–21 Ma; rifting display composite symmetric graben instead of the composite half graben or asymmetric graben in the west. The deep and thermal structures in turn are invoked to account for such deformation differences. The lithosphere of the eastern Qiongdongnan Basin is very hot and thinned because of mantle upwelling and heating, composite symmetric grabens formed and the faults varied with the basal plate boundary. However, the Southern and Northern Uplift area and middle of the central depression is located on normal lithosphere and formed half grabens or simple grabens. The lithosphere in the western sector is transitional from very hot to normal. Eventually, the Paleogene tectonic development of the Qiongdongnan Basin may be summarized into three stages with dominating influences, the retreat of the West Pacific subduction zone (44–36 Ma), slow Indochina block extrusion together with slab-pull of the Proto-South China Sea (36–30 Ma), rapid Indochina block extrusion together with the South China Sea seafloor spreading (30–21 Ma).