North sea offshore structures

Existing and planned North Sea offshore structures for exploration (drillings) and structures for exploitation (production platforms) are mentioned. Introductorily the mereorological conditions, wave climate and bottom composition in the North Sea are reviewed briefly. They are determining factors for design as well as for operation. Furthermore a brief account on present and planned activities on exploration for and exploitation of oil and gas in the North Sea is given.     

圆筒型FPSO阻尼结构的阻尼性能研究

针对圆筒型海上储油装置FPSO,研究其不同类型阻尼结构的阻尼性能,以便有效减小此类结构的垂荡运动。提出U型和倒U型两种不同的圆筒型FPSO阻尼结构型式,采用CFD方法模拟浮体的强迫运动,计算分析阻尼结构的阻尼特性,对比了传统垂荡板结构、U型阻尼结构、倒U型阻尼结构的阻尼性能,详细分析阻尼结构的不同参数包括高度、筒体间距、开孔情况等三个因素对于阻尼特性的影响,基于CFD方法,分析了不同阻尼结构阻尼形成的机理。计算分析表明,倒U型阻尼性能最好,U型和倒U型阻尼结构与筒体间距增大后阻尼增大,阻尼结构高度增加或开孔增加后阻尼降低。     

海洋平台结构的最新研究进展 第9届ISOPE大会报告综述

分9个专题对第9届ISOPE大会报告有关海洋平台结构的最新研究动态进行了评述和总结,并结合我国海洋石油工业的发展现状提出了一些建议,供我国产业部门和有关高校与研究机构参考。     

Foundation engineering for offshore gravity structures

This is the third in a series of three state‐of‐the‐art papers concerning the geotechnical engineering aspects of the installation of gravity platforms in the North Sea. Andresen et al. (1979) discuss the planning and execution of offshore site investigations and the procedures used to obtain soil engineering parameters. Eide et al. (1979) review the details of the different platform designs and the installation procedures for the thirteen gravity structures that so far have been placed in the North Sea in 70 m to 153 m of water. In this paper, the foundation engineering for gravity structures installed in the North Sea is reviewed including recommended analyses of permanent and cyclic foundation deformations, dynamic behavior, foundation stability, skirt penetration resistance and base contact stresses, potential piping and erosion problems, and stresses in oil wells and risers. Field performance observations are reported, and it is concluded that gravity structures may safely be installed in offshore areas with less favorable platform foundation conditions than so far encountered in the North Sea.     

海洋平台结构的冰力作用模型

首先分析了工程中静冰力计算中普遍应用的Korzhavin -Afanasev公式和Schawz公式 ,提出了统一的静冰力模型 ,给出了挤压破坏、屈曲破坏和弯曲破坏冰力系数函数CI(t)。应用该冰力模型分析了自激振动产生的条件 ,指出冰屈曲破坏和弯曲破坏动冰力可以作为强迫振动模型 ,冰挤压破坏动冰力则需要考虑CI(t)与冰阻尼的耦合效应。最后应用冰力一般模型计算单自由度结构的响应     

Force resultants for deep-water wave-excited offshore structures

Concepts are developed which lead to an improved understanding of the characteristics of the wave forces that act on deep-water, jacket-type offshore structures. These concepts are the result of comprehensive examinations of both the inertia and the drag force components of the wave excitation. It is shown that, under conditions which are of practical importance, the resultants of the inertia and drag force components can both be expressed in terms of the motion of the sea surface. Fundamental modal forces which govern fundamental modal responses for offshore structures are also examined, and the relationships between these modal forces and the resultants of the inertia and drag force components are established. The structural response itself is further examined, and valuable information is developed which is believed to be of practical importance.     

Random dynamic analysis of multi-body offshore structures

A general method for the dynamic analysis of multi-body offshore structures is presented, being based on a constraint matrix approach. A method of deriving the constraint matrix for a general structure is given, and this is then used to derive the equations of motion of a whole system from those of it's component parts. The response of the system to both first and second order random wave forces is found and then used to calculate the forces and moments in the connecting mechanisms. The structure is assumed to have rigid component parts and a linearised frequency domain analysis method is used, although other methods are discussed. To illustrate it's use, the method is applied to both the SBS and Yoke-CALM design of offshore mooring terminal.     

北部湾近海结构物污损生物研究

对海洋结构物而言,污损生物不仅增加其水下部位表面粗糙度,显著增大波浪所引起的动力载荷效应,sup>[1],而且还能改变金属腐蚀过程,引起局部腐蚀或穿孔腐蚀,并妨碍水下检测、保养和维修等工作的进行[2,3].因此,在开发利用海洋资源时,必须预先对特定海区污损生物群落的结构特点及发展趋势有所了解,以便人们经济、有效的角度选择防污手段和制定清除保养计划.     

超大型海洋结构物海上安全运输绑扎件设计

绑扎件的制作及安装过程中,由于考虑的因素不够周全,或强度不够造成海难事故,或因设计过于保守而造成材料的浪费。根据具体工程项目,结合实际工程经验,对该类绑扎系统设计中应注意的关键问题进行了剖析,包括构件的结构形式及尺寸设置,绑扎系统布置以及构件尺寸与运输船甲板结构的关系,绑扎系统受力计算模型的简化以及结构物对同一组绑扎件构件之间连接的模拟等,并给出具体的工程实例。可为海洋结构物运输的绑扎系统设计以及完善或制订相关标准提供依据,并有助于提高驳船结构计算机辅助设计与强度分析的精度。     

海上风力发电结构动力研究进展

海上风力发电场的建设正在向大型化和规模化发展,以海上风力发电结构的动力响应特性研究为出发点,分别从荷载组合模型、结构耦合和耗能减震措施等几个方面展开,总结了国内外目前对海上风力发电结构进行动力研究的现状,并对未来有待于进一步研究的问题进行介绍.旨在提高海上风力发电结构的设计理论,增强其抵抗灾害性破坏的能力.     

海上风电场基础结构设计综述

针对我国海上风电场开发建设的现状和发展趋势,结合海上风电场基础结构设计研发现状和存在的问题,探讨海上风电场基础结构设计的关键问题——设计理念、设计方法和设计标准等,分析海上风电场基础结构的结构、荷载和服役特点,分析海上风电场基础结构与水工结构和海洋石油平台设计的异同。并根据海上风电和海洋石油的行业特点,分析API规范和DNV规范对于海上风电场基础结构设计的适用性,阐述了海上风电场基础结构设计的特殊性、荷载取值和参考标准等问题。基于我国海洋工程技术发展水平和海上风电产业的发展趋势,提出发展适合我国国情的海上风电场基础结构型式及设计,指出我国海上风电产业发展应注意和避免发生的问题。     

Damage detection in offshore platform structures from limited modal data

Development of efficient global damage detection techniques for offshore structures is of great importance. The present paper applies the iterative modal strain energy (IMSE) method to locate and quantify the damage for three dimensional frame structures, when limited, spatially incomplete modal data are available. One theoretical development is a new procedure to directly incorporate the spatially-incomplete mode shapes in the algorithm, where slave degrees of freedom iterative updating procedure (SDUP) is developed for evaluating the damage indicator and damage severity. The merits of this new method are that both the modal frequencies and spatially incomplete mode shapes can be used. Also, the modal frequencies do not need to pair the mode shapes one by one. To demonstrate the feasibility and effectiveness of the developed algorithm, numerical studies are conducted for a 3D offshore platform based on data generated from finite element models. Numerical results demonstrate that the present method is effective for the damage assessment of a 3D frame structures when limited, spatially incomplete modal data are available. After considering more practical factors, it is expected to be more applicable in structural damage assessment.     

海洋平台结构抗震可靠性时程分析方法

将地震运动视为随机过程,建立海洋平台结构在地震作用任一时刻基于剪切变形控制的极限状态方程,应用JC法计算海洋平台结构在地震作用任一时刻的可靠度,得到海洋平台结构抗震可靠度的时程曲线。该方法可满足工程设计的要求,便于工程应用。     

Stochastic analysis for offshore structures with added mechanical dampers

Presented in this paper is a method to mitigate the vibration of an offshore structural system in the marine environment when subjected to in-line random wave forces. A stochastic approach by using an alternative complex analytical model for the viscoelastic material in the mechanical damper was used. The viscoelastic materials applied here were tested and verified that they have high energy absorption capacity. In the stochastic analysis, a random type of wave forces derived from the Morison equation for small bodies was applied. Results of the vibration responses for the system with added damping devices were presented and compared to the responses of structures with traditional design. It was observed that in terms of the power spectral density, the effect of the vibration mitigation and the dynamic performance of the offshore structural system were greatly improved when the new damping devices were applied to the offshore structural system.     

海洋平台结构实时安全监测系统

阐述了海洋平台结构实时计算模型的建立和修正方法，确定了在海洋环境监测的基础上本系统实时环境荷载，提出了海洋平台结构实时安全评估的方法，采用Delphi开发工具，开发出了Windows应用程序“海洋平台结构实时安全监测系统”。该系统于1998－1999年和1999－2000年冬季两次在渤海JZ20－2MUQ平台上试运行，实时监测了JZ20－2MUQ平台两个冬季的安全状况。