Origin,evolution and anatomy of silt‐prone submarine external levées

Submarine external levées are constructional features that develop outside slope channel systems, and are a volumetrically significant component of continental margins. However, detailed observations of their process sedimentology and depositional architecture are rare. Extensive exposures of external levées at multiple stratigraphic intervals and well‐constrained palaeogeographic positions in the Fort Brown Formation, Karoo Basin, South Africa, have been calibrated with research boreholes. This integrated data set permits their origin, evolution and anatomy to be considered, including high‐resolution analysis of sedimentary facies distribution and characterization of depositional sub‐environments. An idealized model of the stratigraphic evolution and depositional architecture of external levées is presented, and variations can be attributed to allogenic (for example, sediment supply) and autogenic (for example, channel migration) factors. Initiation of external levée construction is commonly marked by deposition of a basal sand‐rich facies with sedimentary structures indicating rapid deposition from unconfined flows. These deposits are interpreted as frontal lobes. Propagation of the parent channel, and resultant flow confinement, lead to partial erosion of the frontal lobe and development of constructional relief (levées) by flow overspill and flow stripping. Overall fining‐upwards and thinning‐upwards profiles reflect increased flow confinement and/or waning flow magnitude through time. Identification of a hierarchy of levée elements is not possible due to the absence of internal bounding surfaces or sharp facies changes. The down‐slope taper in levée height and increasing channel sinuosity results in increasing numbers of crevasse lobe deposits, and is reflected by the increased occurrences of channel avulsion events down‐dip. External levées from the Fort Brown Formation are silt‐rich; however their stratigraphic evolution and the distribution of many components (such as sediment waves and crevasse lobe) share commonalities with mud‐rich external levées. This unique integrated data set has permitted the first high‐resolution characterization of external submarine levée systems.     

River-dominated and tide-influenced shelf-edge delta systems: Coarse-grained deltas straddling the Early–Middle Jurassic shelf–slope break and transforming downslope,Lajas–Los Molles formations,Neuquén Basin,Argentina

The three-dimensional facies and architecture variability of shelf-edge deltaic units cropping out at the transition between the Lower–Middle Jurassic Lajas and Los Molles formations of southern Neuquén Basin, Argentina, is presented here, as well as their stratigraphic relationship to uppermost deep-water slope channel systems. Deep-water, slope mudstones with thin turbidite beds merge upward with prodelta mudstones and thin sandstones, which are truncated by delta-front to mouth-bar sandstones. The latter sandstones are then downcut by large-scale, trough cross-stratified coarse-grained sandstones and conglomerates of distributary channel systems and along-strike, amalgamated with cross-bedded sandy units showing evidence of tidal reworking. Proximal–distal facies and architecture variability within a shelf-edge deltaic succession demonstrates that distributary channel-complexes become wider and deeper basinward, forming channelized river-dominated distributary fairways separated by tidally reworked inter-distributary sand belts at the shelf edge. Evidence from depositional-dip oriented outcrops shows a lack of collapsed and slumped strata at the shelf edge, and that the coarse shelf-edge distributary channel fills continue far down the deepwater slope, and conglomerates transform to become high-density turbidites to mainly thick-bedded, sand-matrix-supported debrites. The interplay between flood tides and river currents is interpreted to have primarily modulated the focusing of river drainages, and consequently coarse-grained sediment transport, along preferential routes on the outer-shelf to shelf-edge and down onto the slope. This contribution documents a unique example of coarse-grained (mostly conglomeratic) shelf-edge delta systems, tying bed-scale facies and architecture data to a seismic-scale shelf-margin morphology, thus providing outcrop analogue data for the characterization of shelf-edge delta systems in the subsurface.     

Braided stream and flood plain architecture: the Rio Vero Formation,Spanish Pyrenees

Early- to middle-Miocene fluvial sandstones of the Rio Vero Formation were studied, in an area around the town of Barbastro, south central Pyrenees Spain. The outstanding quality of outcrops in this area allows a three-dimensional study of architectural elements.Six architectural elements are recognised, described in detail, and interpreted from three key localities. Seven main lithofacies were identified and sub-divided into gravelly, sandy and fine-grained lithofacies. The architectural elements and lithofacies have been combined with a hierarchy of depositional bounding surfaces to fully interpret the evolution of the depositional system at the meso- and macro-scale. Not only the different architectural elements and lithofacies of the complete braided fluvial system, but also the lateral variation of the architectural elements were emphasised in this study. Differential tectonic movements, seasonal climate change, and their effect on vertical and lateral evolution of the area were the main control on basin sedimentation, channel interconnection, palaeocurrent patterns, and consequently the fluvial architecture.The presence of lateral ramp anticlines caused the fluvial system to be laterally restricted, with the main channel-belts being located in the areas of highest subsidence and lowest topography. Intervening topographic highs acted as both flood plains and lateral barriers between the main channel systems. The proposed depositional model comprises broad, low-sinuosity, perennial, but seasonal moderate-energy streams. The sandstone architecture is dominated by channel-fill and sheet sands, and associated simple and more complex bars. Adjacent to the main channel-belts fine-grained sandstones, siltstones and immature paleosols occur.The along-strike relationship between major fluvial systems and their outlets into a foreland basin has important implications for the infill of the basin and the modelling of fluvial systems along mountain belt fronts.     

Facies model of a fine‐grained,tide‐dominated delta: Lower Dir Abu Lifa Member (Eocene), Western Desert,Egypt

Existing facies models of tide‐dominated deltas largely omit fine‐grained, mud‐rich successions. Sedimentary facies and sequence stratigraphic analysis of the exceptionally well‐preserved Late Eocene Dir Abu Lifa Member (Western Desert, Egypt) aims to bridge this gap. The succession was deposited in a structurally controlled, shallow, macrotidal embayment and deposition was supplemented by fluvial processes but lacked wave influence. The succession contains two stacked, progradational parasequence sets bounded by regionally extensive flooding surfaces. Within this succession two main genetic elements are identified: non‐channelized tidal bars and tidal channels. Non‐channelized tidal bars comprise coarsening‐upward sandbodies, including large, downcurrent‐dipping accretion surfaces, sometimes capped by palaeosols indicating emergence. Tidal channels are preserved as single‐storey and multilateral bodies filled by: (i) laterally migrating, elongate tidal bars (inclined heterolithic strata, 5 to 25 m thick); (ii) forward‐facing lobate bars (sigmoidal heterolithic strata, up to 10 m thick); (iii) side bars displaying oblique to vertical accretion (4 to 7 m thick); or (iv) vertically‐accreting mud (1 to 4 m thick). Palaeocurrent data show that channels were swept by bidirectional tidal currents and typically were mutually evasive. Along‐strike variability defines a similar large‐scale architecture in both parasequence sets: a deeply scoured channel belt characterized by widespread inclined heterolithic strata is eroded from the parasequence‐set top, and flanked by stacked, non‐channelized tidal bars and smaller channelized bodies. The tide‐dominated delta is characterized by: (i) the regressive stratigraphic context; (ii) net‐progradational stratigraphic architecture within the succession; (iii) the absence of upward deepening trends and tidal ravinement surfaces; and (iv) architectural relations that demonstrate contemporaneous tidal distributary channel infill and tidal bar accretion at the delta front. The detailed facies analysis of this fine‐grained, tide‐dominated deltaic succession expands the range of depositional models available for the evaluation of ancient tidal successions, which are currently biased towards transgressive, valley‐confined estuarine and coarser grained deltaic depositional systems.     

沉积盆地的构造地层分析——以中国构造活动盆地研究为例

结合盆地形成演化过程中各种构造作用与盆地沉积充填和改造过程的成因分析,是揭示内陆构造活动盆地沉积体系域时空配置和生储盖发育分布的重要基础。各级构造不整合面的发育分布决定着盆地规模等时地层格架的基本样式。盆地构造演化的阶段性、旋回性及多期的构造变革对盆内多旋回的沉积-剥蚀过程的叠加和原型盆地的叠合等可产生深刻的影响。阐明不同构造幕同沉积构造活动和古构造格架与沉积物分散过程和构造古地貌变化的成因关系,是建立盆地沉积充填模式的关键。构造坡折带对特定的沉积相带或体系域的发育具有明显的制约作用,往往构成盆内重要的油气成藏区带。中国西部大型叠合盆地内古隆起的形成演化和隆、坳格局的变迁可导致复杂的层序结构和不整合分布样式,对地层或构造地层圈闭的形成分布具有重要的控制作用。     

Stratigraphic evolution of an outcropping continental slope system, Tres Pasos Formation at Cerro Divisadero, Chile

Depositional slope systems along continental margins contain a record of sediment transfer from shallow‐water to deep‐water environments and represent an important area for natural resource exploration. However, well‐preserved outcrops of large‐scale depositional slopes with seismic‐scale exposures and tectonically intact stratigraphy are uncommon. Outcrop characterization of smaller‐scale depositional slope systems (i.e. < 700 m of undecompacted shelf‐to‐basin relief) has led to increased understanding of stratigraphic packaging of prograding slopes. Detailed stacking patterns of facies and sedimentary body architecture for larger‐scale slope systems, however, remain understudied. The Cretaceous Tres Pasos Formation of the Magallanes Basin, southern Chile, presents a unique opportunity to evaluate the stratigraphic evolution of such a slope system from an outcrop perspective. Inherited tectonic relief from a precursor oceanic basin phase created shelf‐to‐basin bathymetry comparable with continental margin systems (～1000 m). Sedimentological and architectural data from the Tres Pasos Formation at Cerro Divisadero reveal a record of continental margin‐scale depositional slope progradation and aggradation. Slope progradation is manifested as a vertical pattern exhibiting increasing amounts of sediment bypass upwards, which is interpreted as reflecting increasing gradient conditions. The well‐exposed, seismic‐scale outcrop is characterized by four 20 to 70 m thick sandstone‐rich successions, separated by mudstone‐rich intervals of comparable thickness (40 to 90 m). Sedimentary body geometry, facies distribution, internal bedding architecture, sandstone richness and degree of amalgamation were analysed in detail across a continuous 2·5 km long transect parallel to depositional dip. Deposition in the lower section (Units 1 and 2) was dominated by poorly channellized to unconfined sand‐laden flows and accumulation of mud‐rich mass transport deposits, which is interpreted as representing a base of slope to lower slope setting. Evidence for channellization and indicators of bypass of coarse‐grained turbidity currents are more common in the upper part of the > 600 m thick succession (Units 3 and 4), which is interpreted as reflecting increased gradient conditions as the system accreted basinward.     

Multi‐scale analysis of a migrating submarine channel system in a tectonically‐confined basin: The Miocene Gorgoglione Flysch Formation,southern Italy

The Miocene Gorgoglione Flysch Formation records the stratigraphic product of protracted sediment transfer and deposition through a long‐lived submarine channel system developed in a narrow and elongate thrust‐top basin of the Southern Apennines (Italy). Channel‐fill deposits are exposed in an outcrop belt approximately 500 m thick and 15 km long, oriented oblique to the palaeoflow, which was roughly south‐eastward. These exceptional exposures of channel‐fill strata allow the stacking architectures and the evolution of the channel system to be analyzed at multiple scales, enabling the effects of syn‐sedimentary thrust tectonics and basin confinement on the depositional system development to be deciphered. Two end‐member types of elementary channel architecture have been identified: high‐aspect‐ratio, weakly‐confined channels, and low‐aspect‐ratio, incisional channels. Their systematic stacking results in a complex pattern of seismic‐scale depositional architectures that determines the stratigraphic framework of the deep‐water system. From the base of the succession, two prominent channel complex sets have been recognized, namely CS1 and CS2, consisting of amalgamated incisional channel elements and weakly‐confined channel elements. These channelized units are overlain by isolated incisional channels, erosional into mud‐prone slope deposits. The juxtaposition of different channel architectures is interpreted to have been governed by regional thrust‐tectonics, in combination with a high subsidence rate that promoted significant aggradation. In this scenario, the alternating ‘in sequence’ and ‘out of sequence’ tectonic pulses of the basin‐bounding thrusts controlled the activation of coarse‐clastic inputs in the basin and the resulting stacking architectures of channelized units. The tectonically‐driven confinement of the depositional system limited the lateral offset in channel stacking, preventing large‐scale avulsions. This study represents an excellent opportunity to analyze the stratigraphic evolution of a submarine channel system in tectonically‐active settings from an outcrop perspective. It should find wide applicability in analogous depositional systems, whose stratigraphic architecture has been influenced by tectonically‐controlled lateral confinement and associated lateral tilting.     

Carbonate slope re-sedimentation in a tectonically-active setting (Western Sicily Cretaceous Escarpment,Italy)

Tectonic processes are widely considered as a mechanism causing carbonate platform margin instabilities leading to the emplacement of mass transport deposits and calciturbidites. However, only few examples establishing a clear link between tectonics and re-sedimentation processes are known from the literature. The two-dimensional and three-dimensional wire-cut walls of hundreds of quarries extracting ornamental limestones (for example, Perlato di Sicilia) from the Western Sicily Cretaceous Escarpment in Italy expose a series of mass transport deposits. The depositional architecture, spatial facies distribution and sedimentary features of these deposits were studied in detail. Thin section analysis was used to define the microfacies characteristics and to determine the age of the re-sedimented limestones. Eleven facies types grouped into four facies associations were recognized that defined specific depositional processes and environments. The stratigraphic architecture of the slope was reconstructed using four composite facies successions based on the detailed analysis and correlation of the field sections. The palaeoslope orientation was reconstructed based on the analysis of synsedimentary faults, slump scars and pinch-out geometries. The Western Sicily Cretaceous Escarpment was strongly influenced by synsedimentary transtensional tectonics in combination with magmatic processes, as suggested by the presence of tuffites and pillow lava intercalations within the re-sedimented carbonate series. These volcanics point to a major role of crustal shear as a trigger for mass transport deposit emplacement. The facies distribution along the Western Sicily Cretaceous Escarpment delivers new insights into the deformation processes accompanying the crustal extension of the Cretaceous western Tethys realm.     

Three-dimensional bounding surface architecture and lateral facies heterogeneity of a wet aeolian system: Entrada Sandstone,Utah

Aeolian deposits form noteworthy reservoirs (for example, Norphlet Formation and Rotliegend Group) in hydrocarbon extraction and carbon capture and storage contexts, but stratigraphic architecture imparts significant heterogeneity. Bounding surfaces result from autogenic and allogenic controls and can represent important changes in dune-field dynamics. To further evaluate the impacts of facies heterogeneity and flow-inhibiting bounding surfaces on reservoir performance and reconstruct ancient erg evolution, the stratigraphic architecture of aeolian systems must continue to be studied at multiple scales. This study pairs traditional methods (for example, measured stratigraphic sections) with advanced technologies (for example, drone-derived outcrop models) to precisely resolve the metre to kilometre-scale three-dimensional stratigraphic architecture of wet aeolian Middle Jurassic Entrada Sandstone outcrops located at Rone Bailey Mesa near Moab, Utah, USA. Five facies are identified, primarily based on sedimentary fabrics, and are grouped into three associations named dune, sabkha and sand sheet. Statistical analyses of gamma-ray spectrometer and automated mineralogy data indicate a distinct mineralogical difference between dune (quartz-rich) and sabkha (more feldspathic) packages, suggesting that gamma-ray logs may be used to better predict facies distribution in the subsurface. Seven modelled super bounding surfaces are planar to undulatory, with no perceived spatial trends. Five modelled interdune migration surfaces are undulatory but exhibit an average 0.09° angle of climb roughly parallel to the palaeocurrent direction. Two modelled superposition surfaces are linear to sinuous in plan-view. Laterally discontinuous sabkha packages observed are interpreted to be remnants of closed, damp, interdune flats located between ca 8.5 to 17.0 m tall, sinuous, transverse bedforms or patches of such bedforms. Based on stratigraphic architecture interpretations, the Entrada Sandstone preserves signals of allogenic forcing and localized autogenic bedform cannibalization of the substrate. The findings of this study, some of which are not commonly recognized in wet aeolian facies models, enhance the understanding of erg evolution and can parameterize static models of aeolian reservoirs.     

The Holocene shallowing‐upward parasequence of north‐west Andros Island,Bahamas

Many pre‐Mesozoic records of Earth history are derived from shallow water carbonates deposited on continental shelves. While these carbonates contain geochemical proxy records of climate change, it is the stratal architecture of layered carbonate units that often is used to build age models based on the idea that periodic astronomical forcing of sea‐level controls the layering. Reliable age models are crucial to any interpretation of rates and durations of environmental change, but the physical processes that actually control this stratal architecture in shallow water carbonates are controversial. In particular, are upward‐shallowing stacks of carbonate beds bounded by flooding surfaces (‘parasequences’) truly a record of relative sea‐level change? The purpose of this study is to examine a tidal flat that is actively accumulating carbonate stratigraphy, and to determine the relative importance of tidal channel migration (poorly known, but investigated here) and Holocene sea‐level rise (well‐known) in controlling post‐glacial parasequence architecture. This work represents a field study of peritidal carbonate accumulation at Triple Goose Creek, north‐west Andros Island. By integrating surface facies maps with differential global positioning system topographic surveys, a quantitative relationship between facies and elevation is derived. Sedimentary facies are sensitive to elevation changes as small as 5 cm, and are responding to both internal (distance to nearest tidal channel) and external (sea‐level rise) controls. The surface maps also are integrated with 187 sediment cores that each span the entire Holocene succession. While flooding of the Triple Goose Creek area should have occurred by ca 4500 years ago, preservation of Holocene sediment did not begin until 1200 years ago. The tidal channels are shown to be stationary, or to migrate sluggishly at up to 6 cm per year. Therefore, while the location of tidal channels is responsible for the modern mosaic of surface facies, these facies and the channels that control them have not migrated substantially during the ca 1200 years of sediment accumulation at Triple Goose Creek. Once the region was channellized, vertical and lateral shifts in facies, such as the landward retreating shoreline, expanding mangrove ponds and seaward advancing inland algal marsh, are driven by changes in relative sea‐level and sediment supply, not migrating channels. While stratigraphic columns look different depending on the distance to the nearest tidal channel, the overall parasequence architecture everywhere at Triple Goose Creek records an upward‐shallowing trend controlled by the infilling of accommodation space generated by post‐glacial sea‐level rise.     

Between beds and sequences: stratigraphic organization at intermediate scales in the Quaternary of the Virginia coast, USA

ABSTRACT Stratigraphy presupposes a hierarchy of scales of spatial organization supplemented at the small‐scale end by sedimentological concepts (beds, bed sets and bed cosets) and, at larger spatial scales, by sequence‐stratigraphic concepts (systems tracts, parasequences, sequences). Between these two end‐members are intermediate‐scale bodies described as ‘lithofacies’, or simply ‘facies’. A more restricted concept, granulometric facies, can be described in terms of horizontal grain‐size gradients (‘facies change’) and cyclic vertical grain‐size gradients (‘stratification’). Assemblages of facies so defined (also called depositional systems) are not random, but occur in a limited suite of patterns. Such assemblages may be linked to two classes of bounding surfaces, a source diastem (the immediate source of the sediment) and a surface of closure (if preserved), between which is sandwiched a transgressive or regressive, basinward‐fining facies succession. Systems‐bounding surfaces are notably more continuous than internal (gradational) facies boundaries. By thus restricting the definition of a facies assemblage (depositional system), it is possible to describe the Quaternary of the Virginia coast with as few as 12 systems. Depositional systems in the Quaternary of the Virginia coast are allometric, in that any system can be derived from any other by plastic expansion of one or more facies relative to another, or by simple symmetry operations. Self‐similarity prevails across this intermediate scale of stratigraphic organization. Facies assemblages (depositional systems) consist of event beds, which themselves have erosional basal boundaries and internal successions of microfacies. At larger spatial scales, depositional systems are repeated, either autocyclic repetitions forced by processes within the basin of deposition or allocyclic repetitions, as ‘parasequences’ and high‐frequency sequences. In the Virginia Quaternary, systems architecture is compatible with sequence architecture and nests conformably within its framework, but analysis of systems architecture reveals rules beyond those governing sequence architecture.     

Muglad盆地Sufyan凹陷下白垩统AG组2段沉积特征与成因模式

下白垩统AG组2段(后简称AG2段)是苏丹Muglad盆地Sufyan凹陷的主力烃源岩和最重要的含油层系。本文基于岩石学、测井相、地震相和地震属性研究,对Sufyan凹陷下白垩统AG2段沉积体系进行精细研究,结合其沉积期构造特征、古地貌特征、古气候环境及内物源和外物源发育特征,建立了其断陷期沉积模式。Sufyan凹陷AG组断陷初期为双断模式,南北两侧高陡断层发育规模相当,随着盆地的演化和湖平面的变化,到AG2段进入高水位期,凹陷北部逐渐演变为缓坡沉积环境,南部仍然为陡坡沉积环境。凹陷北部为Babanusa凸起和中非走滑带,为Muglad盆地的盆外物源,凹陷南部以Tomat凸起与Nugara凹陷分割,发育内物源。从钻井和岩心资料来看,凹陷北部以分选较好、细粒沉积为主,在断层下降盘发现中粗粒重力流沉积,反映了北部物源长距离搬运和长期供应的特点,据此建立了断陷后期AG2段北部曲流河三角洲沉积模式,北部物源为主力物源区;南部临近凹陷断裂带钻井揭示其发育较高砂地比的细粒沉积,显示物源供给的周期性和近源性,研究认为发育辨状河三角洲,沉积模式类似于扇三角洲,总体物源供给能力较弱,具有近源水下搬运特征。南部物源和西部物源一起,构成凹陷的次物源。本文综合编制了Sufyan凹陷AG2段沉积期的两期沉积相图,建立了立体沉积模式,认为盆地优质储层应以凹陷中部近烃源岩的区带为目标进行寻找。     

Sedimentation on an early Proterozoic continental margin under glacial influence: the Gowganda Formation (Huronian), Elliot Lake area, Ontario, Canada

Eight continuous cores up to 150 m long and spaced an average of 200 m apart yield a detailed local insight into the composition and architecture of an ancient continental margin sequence, the Gowganda Formation (early Proterozoic: Huronian) near Elliot Lake, Ontario. Nearby outcrops of similar facies provide important supplementary data on sedimentary structures. Continental glaciers provided an abundant supply of coarse debris but, apart from rafting of debris by floating ice, played little or no part in Gowganda sedimentation. The basal 50 m of the Gowganda Formation in the drill-hole area represents a continental slope depositional system. It consists mainly of gravelly and sandy sediment gravity flow deposits, interbedded with minor rain-out units of diamictite, and argillite containing dropstones. Ten types of sediment gravity flow deposit are distinguished. An overlying submarine-channel depositional system, 10–50m thick, consists of hemipelagic argillites containing dropstones and showing deformation structures. These are interbedded with well-sorted channel-fill sandstones. Submarine point bars 4·5 m thick (identified in nearby outcrops) demonstrate a meandering channel geometry. This channel-fill sequence probably formed during a period of high sea-level and reduced sediment supply, but the relationship to ice advance-retreat cycles is unclear. The subsurface sequence is completed by a blanket of massive rain-out diamictites up to 55 m thick, and a younger slope sequence of sediment gravity flow diamictites and sandstones. The stratigraphy is quite different in outcrop section 10 km to the west of the drill-holes, suggesting the presence of major lateral facies changes and/or internal erosion surfaces within the Gowganda Formation. This complexity of stratigraphy and depositional processes is probably a feature of many ancient glacial units, and points to the advisability of not making climatic or tectonic interpretations from a few generalized or composite sections.     

A sequence stratigraphic model for an intensely bioturbated shallow-marine sandstone: the Bridport Sand Formation, Wessex Basin, UK

The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence.     

Cyclicity in the nearshore marine to coastal, Lower Permian, Pebbley Beach Formation, southern Sydney Basin, Australia: a record of relative sea-level fluctuations at the close of the Late Palaeozoic Gondwanan ice age

The Lower Permian (Artinskian to Sakmarian) Pebbley Beach Formation (PBF) of the southernmost Sydney Basin in New South Wales, Australia, records sediment accumulation in shallow marine to coastal environments at the close of the Late Palaeozoic Gondwanan ice age. This paper presents a sequence stratigraphic re‐evaluation of the upper half of the unit based on the integration of sedimentology and ichnology. Ten facies are recognized, separated into two facies associations. Facies Association A (seven facies) comprises variably bioturbated siltstones and sandstones with marine body fossils, interpreted as recording sediment accumulation in open marine environments ranging from lower offshore to middle shoreface water depths. Evidence of deltaic influence is seen in several Association A facies. Facies Association B (three facies) comprises mainly heterolithic, interlaminated and thinly interbedded sandstone and siltstone with some thicker intervals of dark grey, organic‐rich mudstone, some units clearly filling incised channel forms. These facies are interpreted as the deposits of estuarine channels and basins. Throughout the upper half of the formation, erosion surfaces with several metres relief abruptly separate open marine facies of Association A (below) from estuarine facies of Association B (above). Vertical facies changes imply significant basinward shift of environment across these surfaces, and lowering of relative sea level in the order of 50 m. These surfaces can be traced over several kilometres along depositional strike, and are defined as sequence boundaries. On this basis, at least nine sequences have been recognized in the upper half of the formation, each of which is < 10 m thick, condensed, incomplete and top‐truncated. Sequences contain little if any record of the lowstand systems tract, a more substantial transgressive systems tract and a highstand systems tract that is erosionally truncated (or in some cases, missing). This distinctive stacking pattern (which suggests a dominance of retrogradation and progradation over aggradation) and the implied relative sea‐level drop across sequence boundaries of tens of metres are remarkably similar to some other studies of continental margin successions formed under the Neogene icehouse climatic regime. Accordingly, it is suggested that the stratigraphic architecture of the PBF was a result of an Icehouse climate regime characterized by repeated, high‐amplitude cycles of relative sea‐level change.     

Sequence stratigraphic controls on reservoir characterization and architecture: case study of the Messinian Abu Madi incised-valley fill, Egypt

Understanding sequence stratigraphy architecture in the incised-valley is a crucial step to understanding the effect of relative sea level changes on reservoir characterization and architecture. This paper presents a sequence stratigraphic framework of the incised-valley strata within the late Messinian Abu Madi Formation based on seismic and borehole data. Analysis of sand-body distribution reveals that fluvial channel sandstones in the Abu Madi Formation in the Baltim Fields, offshore Nile Delta, Egypt, are not randomly distributed but are predictable in their spatial and stratigraphic position. Elucidation of the distribution of sandstones in the Abu Madi incised-valley fill within a sequence stratigraphic framework allows a better understanding of their characterization and architecture during burial. Strata of the Abu Madi Formation are interpreted to comprise two sequences, which are the most complex stratigraphically; their deposits comprise a complex incised valley fill. The lower sequence (SQ1) consists of a thick incised valley-fill of a Lowstand Systems Tract (LST1)) overlain by a Transgressive Systems Tract (TST1) and Highstand Systems Tract (HST1). The upper sequence (SQ2) contains channel-fill and is interpreted as a LST2 which has a thin sandstone channel deposits. Above this, channel-fill sandstone and related strata with tidal influence delineates the base of TST2, which is overlain by a HST2. Gas reservoirs of the Abu Madi Formation (present-day depth ～3552 m), the Baltim Fields, Egypt, consist of fluvial lowstand systems tract (LST) sandstones deposited in an incised valley. LST sandstones have a wide range of porosity (15 to 28%) and permeability (1 to 5080mD), which reflect both depositional facies and diagenetic controls. This work demonstrates the value of constraining and evaluating the impact of sequence stratigraphic distribution on reservoir characterization and architecture in incised-valley deposits, and thus has an important impact on reservoir quality evolution in hydrocarbon exploration in such settings.     

沉积物体积分配原理——高分辨率层序地层学的理论基础

基准面旋回期间沉积物以不同体积被分配到不同相域的过程及其伴随的可容纳空间的变化称为“沉积物体积分配” ,它反映了沉积过程响应系统遵循物质保存定律。沉积物体积分配在地层记录中的沉积学和地层学的响应表现为 :( 1)地层旋回的对称性随时间和空间的变化 ;( 2 )反映原始地貌要素保存程度的相分异作用 ;( 3)进积 /加积地层单元的叠加样式。这些沉积学与地层学属性无一不是高分辨率层序地层划分与对比的基础。根据沉积物体积分配原理 ,正确的年代地层对比应该是有时岩石与岩石、有时岩石与界面或界面与界面的对比 ,而不是等厚度对比和岩性地层对比。鄂尔多斯盆地上古生界海陆过渡相和渤海湾裂谷盆地东营组湖相沉积的地层对比说明了沉积物体积分配的过程及其在高分辨率地层划分和对比中的应用。     

Colluvial sedimentation in a hyperarid setting (Atacama Desert,northern Chile): Geomorphic controls and stratigraphic facies variability

Research on colluvial depositional systems has recently emphasized periglacial and high‐altitude settings, and the relations between Quaternary slope stratigraphy and climate change. This article examines the role of variable slope morphology, surface hydrology and microclimate in controlling colluvial sedimentation along a coastal tract of the hyperarid Atacama Desert in northern Chile. Direct accessibility of active surfaces is accompanied by uninterrupted stratigraphic exposures along the base of slopes, allowing direct comparisons between surface processes and the resulting sedimentary record. Four slope sectors are identified, based on differences in morphology and processes over active surfaces. Colluvial sedimentation is controlled by complex interactions of slope gradients and profiles, exposure to dominant winds, and potential runoff pathways, which vary considerably between different sectors. Major differences are evident between these hyperarid deposits and slope sedimentation in periglacial and temperate settings, including the complete absence of pedogenic activity and clay minerals; the volume of aeolian deposits and their role in controlling processes which redistribute sediment downslope, extending colluvial aprons; and the occurrence of runoff processes only where favoured by particular topographic configurations. Depositional surfaces range from steep talus cones, to debris‐flow‐dominated and aeolian‐dominated colluvial aprons, to an aeolian ramp subject to reworking by mass flows and flash floods. Consequently, facies associations and architectures at outcrop are highly variable and highlight the importance of spatial variations in slope morphology and processes in producing distinct, coeval colluvial stratigraphies within a single environmental context. Discrepancies between active processes and the corresponding stratigraphic signatures are also evident in some sectors; for example, preservation of alluvial and aeolian facies in stratigraphic sections does not always reflect the dominant processes over active slopes. Together with the spatial variability in processes and deposits along these slopes, this suggests that caution is required when extracting palaeoenvironmental information from analyses of colluvial successions.     

Architecture and formation of transgressive–regressive cycles in marginal marine strata of the John Henry Member,Straight Cliffs Formation,Upper Cretaceous of Southern Utah,USA

Marginal marine deposits of the John Henry Member, Upper Cretaceous Straight Cliffs Formation, were deposited within a moderately high accommodation and high sediment supply setting that facilitated preservation of both transgressive and regressive marginal marine deposits. Complete transgressive–regressive cycles, comprising barrier island lagoonal transgressive deposits interfingered with regressive shoreface facies, are distinguished based on their internal facies architecture and bounding surfaces. Two main types of boundaries occur between the transgressive and regressive portions of each cycle: (i) surfaces that record the maximum regression and onset of transgression (bounding surface A); and (ii) surfaces that place deeper facies on top of shallower facies (bounding surface B). The base of a transgressive facies (bounding surface A) is defined by a process change from wave‐dominated to tide‐dominated facies, or a coaly/shelly interval indicating a shift from a regressive to a transgressive regime. The surface recording such a process change can be erosional or non‐erosive and conformable. A shift to deeper facies occurs at the base of regressive shoreface deposits along both flooding surfaces and wave ravinement surfaces (bounding surface B). These two main bounding surfaces and their subtypes generate three distinct transgressive – regressive cycle architectures: (i) tabular, shoaling‐upward marine parasequences that are bounded by flooding surfaces; (ii) transgressive and regressive unit wedges that thin basinward and landward, respectively; and (iii) tabular, transgressive lagoonal shales with intervening regressive coaly intervals. The preservation of transgressive facies under moderately high accommodation and sediment supply conditions greatly affects stratigraphic architecture of transgressive–regressive cycles. Acknowledging variation in transgressive–regressive cycles, and recognizing transgressive successions that correlate to flooding surfaces basinward, are both critical to achieving an accurate sequence stratigraphic interpretation of high‐frequency cycles.