Sedimentology,stratigraphy and architecture of the Nicobar Fan (Bengal–Nicobar Fan System), Indian Ocean: Results from International Ocean Discovery Program Expedition 362

Drill sites in the southern Bay of Bengal at 3°N 91°E (International Ocean Discovery Program Expedition 362) have sampled for the first time a complete section of the Nicobar Fan and below to the oceanic crust. This generally overlooked part of the Bengal–Nicobar Fan System may provide new insights into uplift and denudation rates of the Himalayas and Tibetan Plateau. The Nicobar Fan comprises sediment gravity-flow deposits, mostly turbidites, that alternate with hemipelagite drapes and pelagite intervals of varying thicknesses. The decimetre-thick to metre-thick oldest pre-fan sediments (limestones/chalks) dated at 69 Ma are overlain by volcanic material and slowly accumulated pelagites (0.5 g cm⁻² kyr⁻¹). At Expedition 362 Site U1480, terrigenous input began in the early Miocene at ca 22.5 Ma as muds, overlain by very thin-bedded and thin-bedded muddy turbidites at ca 19.5 Ma. From 9.5 Ma, sand content and sediment supply sharply increase (from 1–5 to 10–50 g cm⁻² kyr⁻¹). Despite the abundant normal faulting in the Nicobar Fan compared with the Bengal Fan, it offers a better-preserved and more homogeneous sedimentary record with fewer unconformities. The persistent connection between the two fans ceased at 0.28 Ma when the Nicobar Fan became inactive. The Nicobar Fan is a major sink for Himalaya-derived material. This study presents integrated results of International Ocean Discovery Program Expedition 362 with older Deep Sea Drilling Project/Ocean Drilling Program/International Ocean Discovery Program sites that show that the Bengal–Nicobar Fan System experienced successive large-scale avulsion processes that switched sediment supply between the Bengal Fan (middle Miocene and late Pleistocene) and the Nicobar Fan (late Miocene to early Pleistocene). A quantitative analysis of the submarine channels of the Nicobar Fan is also presented, including their stratigraphic frequency, showing that channel size/area and abundance peaked at ca 2 to 3 Ma, but with a distinct low at 3 to 7 Ma: the intervening stratigraphic [sub]unit was a time of reduced sediment accumulation rates.     

Provenance of Holocene beach sand in the Western Iberian margin: the use of the Kolmogorov–Smirnov test for the deciphering of sediment recycling in a modern coastal system

Detrital zircons from Holocene beach sand and igneous zircons from the Cretaceous syenite forming Cape Sines (Western Iberian margin) were dated using laser ablation – inductively coupled plasma – mass spectrometry. The U–Pb ages obtained were used for comparison with previous radiometric data from Carboniferous greywacke, Pliocene–Pleistocene sand and Cretaceous syenite forming the sea cliff at Cape Sines and the contiguous coast. New U–Pb dating of igneous morphologically simple and complex zircons from the syenite of the Sines pluton suggests that the history of zircon crystallization was more extensive (ca 87 to 74 Ma), in contrast to the findings of previous geochronology studies (ca 76 to 74 Ma). The U–Pb ages obtained in Holocene sand revealed a wide interval, ranging from the Cretaceous to the Archean, with predominance of Cretaceous (37%), Palaeozoic (35%) and Neoproterozoic (19%) detrital‐zircon ages. The paucity of round to sub‐rounded grains seems to indicate a short transportation history for most of the Cretaceous zircons (ca 95 to 73 Ma) which are more abundant in the beach sand that was sampled south of Cape Sines. Comparative analysis using the Kolmogorov–Smirnov statistical method, analysing sub‐populations separately, suggests that the zircon populations of the Carboniferous and Cretaceous rocks forming the sea cliff were reproduced faithfully in Quaternary sand, indicating sediment recycling. The similarity of the pre‐Cretaceous ages (>ca 280 Ma) of detrital zircons found in Holocene sand, as compared with Carboniferous greywacke and Pliocene–Pleistocene sand, provides support for the hypothesis that detritus was reworked into the beach from older sedimentary rocks exposed along the sea cliff. The largest percentage of Cretaceous zircons (<ca 95 Ma) found in Holocene sand, as compared with Pliocene–Pleistocene sand (secondary recycled source), suggests that the Sines pluton was the one of the primary sources that became progressively more exposed to erosion during Quaternary uplift. This work highlights the application of the Kolmogorov–Smirnov method in comparison of zircon age populations used to identify provenance and sediment recycling in modern and ancient detrital sedimentary sequences.     

Sedimentary architecture and depositional controls of a Holocene wave‐dominated barrier‐island system

Barrier‐island system evolution is controlled by internal and external forcing mechanisms, and temporal changes in these mechanisms may be recorded in the sedimentary architecture. However, the precise role of individual forcing mechanisms is rarely well understood due to limited chronological control. This study investigates the relative role of forcing conditions, such as antecedent topography, sea‐level rise, sediment supply, storms and climate changes, on the evolution of a Holocene wave‐dominated barrier‐island system. This article presents temporal reconstruction of the depositional history of the barrier‐island system of Rømø in the Wadden Sea in unprecedented detail, based on ground‐penetrating radar profiles, sediment cores, high‐resolution dating and palynological investigations, and shows that ca 8000 years ago the barrier island formed on a Pleistocene topographic high. During the initial phase of barrier evolution, the long‐term sea‐level rise was relatively rapid (ca 9 mm year⁻¹) and the barrier was narrow and frequently overwashed. Sediment supply kept pace with sea‐level rise, and the barrier‐island system mainly aggraded through the deposition of a ca 7 m thick stack of overwash fans. Aggradation continued for ca 1700 years until sea‐level rise had decreased to <2 mm year⁻¹. In the last ca 6000 years, the barrier prograded 4 to 5 km through deposition of a 10 to 15 m thick beach and shoreface unit, despite a long‐term sea‐level rise of 1 to 2 mm year⁻¹. The long‐term progradation was, however, interrupted by a transgression between 4000 years and 1700 years ago. These results demonstrate that the large‐scale morphology of the Danish Wadden Sea shoreline influences the longshore sediment transport flux and the millennial‐scale dispersal of sediment along the shoreline. On decadal to centennial timescales, major storms induced intense beach and shoreface erosion followed by rapid recovery and progradation which resulted in a highly punctuated beach and shoreface record. Major storms contributed towards a positive sediment budget, and the sustained surplus of sediment was, and still is, instrumental in maintaining the aggradational–progradational state of the barrier island.     

Mega-monsoon variability during the late Triassic: Re-assessing the role of orbital forcing in the deposition of playa sediments in the Germanic Basin

The formation of the supercontinent Pangaea during the Permo–Triassic gave rise to an extreme monsoonal climate (often termed ‘mega-monsoon’) that has been documented by numerous palaeo-records. However, considerable debate exists about the role of orbital forcing in causing humid intervals in an otherwise arid climate. To shed new light on the forcing of monsoonal variability in subtropical Pangaea, this study focuses on sediment facies and colour variability of playa and alluvial fan deposits in an outcrop from the late Carnian (ca 225 Ma) in the southern Germanic Basin, south-western Germany. The sediments were deposited against a background of increasingly arid conditions following the humid Carnian Pluvial Event (ca 234 to 232 Ma). The ca 2·4 Myr long sedimentary succession studied shows a tripartite long-term evolution, starting with a distal mud-flat facies deposited under arid conditions. This phase was followed by a highly variable playa-lake environment that documents more humid conditions and finally a regression of the playa-lake due to a return of arid conditions. The red–green (a*) and lightness (L*) records show that this long-term variability was overprinted by alternating wet/dry cycles driven by orbital precession and ca 405 kyr eccentricity, without significant influence of obliquity. The absence of obliquity in this record indicates that high-latitude forcing played only a minor role in the southern Germanic Basin during the late Carnian. This is different from the subsequent Norian when high-latitude signals became more pronounced, potentially related to the northward drift of the Germanic Basin. The recurring pattern of pluvial events during the late Triassic demonstrates that orbital forcing, in particular eccentricity, stimulated the occurrence and intensity of wet phases. It also highlights the possibility that the Carnian Pluvial Event, although most likely triggered by enhanced volcanic activity, may also have been modified by an orbital stimulus.     

Post‐Variscan exhumation of the Central Anti‐Atlas (Morocco) constrained by zircon and apatite fission‐track thermochronology

The origin of the Anti‐Atlas relief is one of the currently debated issues of Moroccan geology. To constrain the post‐Variscan evolution of the Central Anti‐Atlas, we collected nine samples from the Precambrian basement of the Bou Azzer‐El Graara inlier for zircon and apatite fission‐track thermochronology. Zircon ages cluster between 340 ± 20 and 306 ± 20 Ma, whereas apatite ages range from 171 ± 7 Ma to 133 ± 5 Ma. Zircon ages reflect the thermal effect of the Variscan orogeny (tectonic thickening of the ca. 7 km‐thick Paleozoic series), likely enhanced by fluid advection. Apatite ages record a complex Mesozoic–Cenozoic exhumation history. Track length modelling yields evidence that, (i) the Precambrian basement was still buried at ca. 5 km depth by Permian times, (ii) the Central Anti‐Atlas was subjected to (erosional) exhumation during the Triassic‐Early Cretaceous, then buried beneath ca. 1.5 km‐thick Cretaceous‐Paleogene deposits, (iii) final exhumation took place during the Neogene, contemporaneously with that of the High Atlas.     

A 1.2 Ma record of glaciation and fluvial discharge from the West European Atlantic margin

The correlation of continental sedimentary records with the marine isotope stratigraphy is a challenge of central importance in Quaternary stratigraphy, particularly in Western Europe where long records of glaciation on land areas are particularly rare. Here we demonstrate for the first time the interrelationship of events during the last 1.2 Ma in an ocean-sediment core from the Bay of Biscay (NE Atlantic), SW of the Channel. The identification of discharge variations from tributary river systems to the ‘Fleuve Manche’ palaeoriver during glacio-eustatic sea-level lowstands demonstrates the correlation of the marine sediment stratigraphy to the expansion and recession of the European ice-sheets. The amplitude and chronology of European ice-sheet oscillations since the late Early Pleistocene is discussed and our results demonstrate that the first coalescence of the Fennoscandian and British ice-sheets in the North Sea basin ca 450 ka ago caused a profound change in lowstand European drainage alignment. This change caused a rerouting of Fennoscandian and eastern British ice-sheets-derived meltwaters from northwards into the Nordic Seas to southwards into the eastern North Atlantic thereafter. Besides allowing a thorough synchronisation of the European ice-sheet palaeogeography with the well-dated records of palaeoceanographical changes, our results improve the stratigraphy of the English Channel palaeovalleys and will provide important constraints on paleoclimatic scenarios considering the impact that such rerouting and meltwater surges might have on the stability of the oceanic conveyor belt.     

Dynamic stratigraphy of composite peripheral unconformity in a foredeep basin

This study employs facies analysis and basic principles of sequence stratigraphy to correlate isolated outcrop sections and reveal the depositional history of the Chmielnik Formation – a prominent mid‐Serravalian clastic wedge formed on the basinward forebulge flank of the Polish Carpathian Foredeep. The coarse‐grained clastic wedge, up to 30 m thick and spanning ca 1·1 Ma within biozone NN6, consists of fluvio‐deltaic, foreshore and shoreface deposits with a range of large littoral sand bars, all enveloped in muddy offshore‐transition deposits. Its dynamic stratigraphy indicates rapid shoreline shifts and environmental changes due to the interplay of forebulge tectonism, sediment supply and third‐order eustatic cycles. A similar interplay of tectonism and eustasy is recognizable in the whole middle Miocene sedimentary succession deposited on the forebulge flank, demonstrating an extreme case of an accommodation‐controlled shelf and indicating tectonic cycles of the forebulge uplift and subsidence spanning ca 800 to 900 ka. The episodes of forebulge uplift correlate with the main pulses of orogen thrusting. The resulting composite peripheral unconformity differs markedly from the idealized model of a ‘steady‐state’ stepwise onlap driven by forebulge continuous retreat. It is concluded that the foredeep peripheral unconformities, instead of being simplified in accordance with this idealized model, should rather be studied in detail because they bear a valuable high‐resolution record of regional events and give unique insights into the local role of tectonics, eustasy and sediment supply.     

Geological structure of the Kashevarov Trough (central Sea of Okhotsk)

This paper reports the composition and age of rocks dredged from the Kashevarov Trough (central Sea of Okhotsk) during cruise 41 of the R/V Akademik M.A. Lavrentyev in 2006. It was found that the Late Cretaceous and Eocene volcanics from the Kashevarov Trough and Okhotsk-Chukotka volcanic belt, structures of which are traceable in the Sea of Okhotsk, have similar petrographic and geochemical features. The Cenozoic sedimentary cover consists of three different-age complexes: (1) the late Oligocene (∼28.2–24.0 Ma); (2) the terminal late Oligocene-early Miocene (24.0–20.3 Ma); (3) the terminal late Pliocene-early Pleistocene (2.0–1.0 Ma). The upper Oligocene-lower Miocene sediments were deposited in relatively shallow-water settings, whereas the late Pliocene-early Pleistocene complex was formed in deeper environments, which was probably determined by tectonic processes. The geological data indicate that the Kashevarov Trough and the surrounding underwater rises represented in the Oligocene-early Miocene a single shelf zone of the Sea of Okhotsk, which is underlain by a structurally integral Mesozoic basement and is now subsided to depths of 800–1000 m.     

Lake sedimentological and ecological response to hyperthermals: Boltysh impact crater,Ukraine

The Boltysh meteorite impact crater, Ukraine, formed at the Cretaceous–Palaeogene boundary at ca 65·2 Ma. A borehole drilled in the central part of the crater cored a >400 m thick high‐resolution lacustrine succession that covers the Dan‐C2 hyperthermal event associated with a negative carbon isotope excursion. Continuous terrestrial records of past hyperthermals are of limited availability, which makes this record a unique case study of the continental impact of rapid climate warming. This study uses high‐resolution sedimentological core log data together with thin‐section, X‐ray diffraction, microprobe and palynological analyses to: (i) reconstruct lake sedimentological and ecological development across the carbon isotope excursion; and (ii) assess the environmental effect of hyperthermals on terrestrial ecosystems. Based on detailed facies analysis, five gradual stages of lake formation are identified, which show a strong relationship to carbon isotope shifts and associated climatic trends. Initially, sediment supply into the Boltysh lake was controlled by crater morphology. During later lake stages, sediment supply was increasingly controlled by changes in inflow–evaporation ratios which affected seasonal stratification patterns and longer term lake levels. An inferred increase in atmospheric pCO₂ related to the carbon isotope excursion, together with increasing mean annual temperatures, was probably responsible for periodic increases in biological activity of photosynthesising organisms and biomass production. These fluctuations in facies and lake settings largely correspond to orbital‐paced moisture availability oscillations. The gradual reduction in sediment supply commencing during early lake formation prior to carbon isotope excursion inception suggest that the Dan‐C2 event did not initiate sedimentary changes, but intensified sedimentary response to orbital controlled climate change.     

Sedimentary evolution and environmental history of Lake Van (Turkey) over the past 600 000 years

The lithostratigraphic framework of Lake Van, eastern Turkey, has been systematically analysed to document the sedimentary evolution and the environmental history of the lake during the past ca 600 000 years. The lithostratigraphy and chemostratigraphy of a 219 m long drill core from Lake Van serve to separate global climate oscillations from local factors caused by tectonic and volcanic activity. An age model was established based on the climatostratigraphic alignment of chemical and lithological signatures, validated by ⁴⁰Ar/³⁹Ar ages. The drilled sequence consists of ca 76% lacustrine carbonaceous clayey silt, ca 2% fluvial deposits, ca 17% volcaniclastic deposits and 5% gaps. Six lacustrine lithotypes were separated from the fluvial and event deposits, such as volcaniclastics (ca 300 layers) and graded beds (ca 375 layers), and their depositional environments are documented. These lithotypes are: (i) graded beds frequently intercalated with varved clayey silts reflecting rising lake levels during the terminations; (ii) varved clayey silts reflecting strong seasonality and an intralake oxic–anoxic boundary, for example, lake‐level highstands during interglacials/interstadials; (iii) CaCO₃‐rich banded sediments which are representative of a lowering of the oxic–anoxic boundary, for example, lake level decreases during glacial inceptions; (iv) CaCO₃‐poor banded and mottled clayey silts reflecting an oxic–anoxic boundary close to the sediment–water interface, for example, lake‐level lowstands during glacials/stadials; (v) diatomaceous muds were deposited during the early beginning of the lake as a fresh water system; and (vi) fluvial sands and gravels indicating the initial flooding of the lake basin. The recurrence of lithologies (i) to (iv) follows the past five glacial/interglacial cycles. A 20 m thick disturbed unit reflects an interval of major tectonic activity in Lake Van at ca 414 ka bp . Although local environmental processes such as tectonic and volcanic activity influenced sedimentation, the lithostratigraphic pattern and organic matter content clearly reflect past global climate changes, making Lake Van an outstanding terrestrial archive of unprecedented sensitivity for the reconstruction of the regional climate over the last 600 000 years.     

Holocene and Pleistocene fringing reef growth and the role of accommodation space and exposure to waves and currents (Bora Bora,Society Islands,French Polynesia)

Holocene fringing reef development around Bora Bora is controlled by variations in accommodation space (as a function of sea‐level and antecedent topography) and exposure to waves and currents. Subsidence ranged from 0 to 0·11 m kyr^?1, and did not create significant accommodation space. A windward fringing reef started to grow 8·7 kyr bp , retrograded towards the coast over a Pleistocene fringing reef until ca 6·0 kyr bp , and then prograded towards the lagoon after sea‐level had reached its present level. The retrograding portion of the reef is dominated by corals, calcareous algae and microbialite frameworks; the prograding portion is largely detrital. The reef is up to 13·5 m thick and accreted vertically with an average rate of 3·12 m kyr^?1. Lateral growth amounts to 13·3 m kyr^?1. Reef corals are dominated by an inner Pocillopora assemblage and an outer Acropora assemblage. Both assemblages comprise thick crusts of coralline algae. Palaeobathymetry suggests deposition in 0 to 10 m depth. An underlying Pleistocene fringing reef formed during the sea‐level highstand of Marine Isotope Stage 5e, and is also characterized by the occurrence of corals, coralline algal crusts and microbialites. A previously investigated, leeward fringing reef started to form contemporaneously (8·78 kyr bp ), but is thicker (up to 20 m) and solely prograded throughout the Holocene. A shallow Pocillopora assemblage and a deeper water Montipora assemblage were identified, but detrital facies dominate. At the Holocene reef base, only basalt was recovered. The Holocene windward–leeward differences are a consequence of less accommodation space on the eastern island side that eventually led to a more complex reef architecture. As a result of higher rates of exposure and flushing, the reef framework on the windward island side is more abundant and experienced stronger cementation. In the Pleistocene, the environmental conditions on the leeward island side were presumably unfavourable for fringing reef growth.     

Geochemical and Nd isotope composition of detrital sediments on the north margin of the South China Sea: provenance and tectonic implications

A major re‐organization of regional drainages in eastern Tibet and south‐western China took place in the Cenozoic as deformation from the growing Himalayas and Tibetan Plateau affected an increasingly wider area. The effects of these changes on the regional sediment routing systems is not well constrained. This study examines the geochemical and Nd signatures of sedimentary rocks from the Ying‐Qiong and Nanxiong basins on the northern margin of the South China Sea to constrain and identify any significant changes in sediment source. Upper Cretaceous to Lower Eocene sedimentary rocks in the Nanxiong Basin show higher Th/Sc, La/Sc, Th/Cr and Th/Co ratios and lower Eu/Eu* ratios than PAAS (post‐Archaean Australian Shale), which indicates that Palaeozoic sedimentary rocks of the South China Block were the main basin sediment source. In contrast, Oligocene to Pleistocene sedimentary rocks of the Ying‐Qiong Basin show an abrupt change in these trace‐element ratios between 16·3 and 10·4 Ma, indicating a mid‐Miocene shift in provenance. ɛ_Nd values from the Ying‐Qiong Basin (range = −11·1 to −2·1) reinforce this, with pre‐13·8 Ma sedimentary rocks having average ɛ_Nd of −5·6 (range = −2·1 to −7·4), and post‐13·8 Ma sedimentary rocks having average ɛ_Nd of −9·3 (range = −8·7 to −11·1). During the Oligocene, the centre of rifting transferred south and basins on the north margin of the South China Sea experienced rapid subsidence. Further uplift and erosion then exposed Mesozoic and Cenozoic granites that supplied large amounts of granitic detritus, especially to the Ying‐Qiong Basin. Then a change occurred at ca 13 Ma resulting in less input from local sources (i.e. the fault blocks formed by Mesozoic‐Cenozoic tectonics and magmatism) to an increasing contribution of older continental material, mostly from Indochina to the west of the South China Sea.     

The Arequipa Massif of Peru: New SHRIMP and isotope constraints on a Paleoproterozoic inlier in the Grenvillian orogen

The enigmatic Arequipa Massif of southwestern Peru is an outcrop of Andean basement that underwent Grenville-age metamorphism, and as such it is important for the better constraint of Laurentia–Amazonia ties in Rodinia reconstruction models. U–Pb SHRIMP zircon dating has yielded new evidence on the evolution of the Massif between Middle Paleoproterozoic and Early Paleozoic. The oldest rock-forming events occurred in major orogenic events between ca. 1.79 and 2.1 Ga (Orosirian to Rhyacian), involving early magmatism (1.89–2.1 Ga, presumably emplaced through partly Archaean continental crust), sedimentation of a thick sequence of terrigenous sediments, UHT metamorphism at ca. 1.87 Ga, and late felsic magmatism at ca. 1.79 Ga. The Atico sedimentary basin developed in the Late-Mesoproterozoic and detrital zircons were fed from a source area similar to the high-grade Paleoproterozoic basement, but also from an unknown source that provided Mesoproterozoic zircons of 1200–1600 Ma. The Grenville-age metamorphism was of low-P type; it both reworked the Paleoproterozoic rocks and also affected the Atico sedimentary rocks. Metamorphism was diachronous: ca. 1040 Ma in the Quilca and Camaná areas and in the San Juán Marcona domain, 940 ± 6 Ma in the Mollendo area, and between 1000 and 850 Ma in the Atico domain. These metamorphic domains are probably tectonically juxtaposed. Comparison with coeval Grenvillian processes in Laurentia and in southern Amazonia raises the possibility that Grenvillian metamorphism in the Arequipa Massif resulted from extension and not from collision. The Arequipa Massif experienced Ordovician–Silurian magmatism at ca. 465 Ma, including anorthosites formerly considered to be Grenvillian, and high-T metamorphism deep within the magmatic arc. Focused retrogression along shear zones or unconformities took place between 430 and 440 Ma.     

Evolution and architecture of a West Mediterranean Upper Pleistocene to Holocene coastal apron‐fan system

The Quaternary deposits of tectonically stable areas are a powerful tool to investigate high‐frequency climate variations (<10 ka) and to distinguish allogenic and autogenic factors controlling deposition. Therefore, an Upper Pleistocene–Holocene coastal apron‐fan system in north–western Sardinia (Porto Palmas, Italy) was studied to investigate the relations between climate changes, sea‐level fluctuations and sediment source‐supply that controlled its development. The sedimentary sequence records the strong influence of local (wet/dry) and worldwide (sea‐level) environmental variations in the sedimentation and preservation of the deposits. A multi‐disciplinary approach allowed subdivision of the succession into four major, unconformity‐bounded stratigraphic units: U1 U2, U3 and U4. Unit U1, tentatively dated to the warm and humid Marine Isotopic Stage (MIS) 5, consists of sandy, gravelly coastal/beach deposits developed during high sea‐level in low‐lying areas. Unit U2 consists of debris‐flow dominated fan‐deposits (ca 74 ka; MIS 4), preserved as partial fills of small valleys and coves. Unit U2 is mainly composed of reddish silty conglomerate to pebbly siltstones sourced from the Palaeozoic metamorphic inland hills (bedrock), superficially disintegrated during the preceding warm, vegetation‐rich MIS 5. The cold and semi‐arid climate strongly reduced vegetation cover along the valley flanks. Therefore, sediment gravity‐flow processes, possibly activated by rainstorms, led to deposition of debris‐flow dominated fans. Unit U3 consists of water‐flow dominated alluvial‐fan deposits (ca 47 to 23 ka; MIS 3), developed on a slightly inclined coastal plain. Unit U3 is composed of sandstone and sandy conglomerate fed from two main sediment sources: metamorphic inland bedrock and Quaternary bioclastic‐rich shelf‐derived sands. During this cold phase, sea‐level dropped sufficiently to expose bioclastic sands accumulated on the shelf. Frequent climate fluctuations favoured inland aeolian transport of sand during dry phases, followed by reworking of the aeolian bodies by flash floods during wet phases. Bedrock‐derived fragments mixed with water‐reworked, wind‐blown sands led to the development of water‐flow dominated fans. The Dansgaard–Oeschger events possibly associated with sand landward deflation and main fan formations are Dansgaard–Oeschger 13 (ca 47 ka), Dansgaard–Oeschger 8 (ca 39 ka) and Dansgaard–Oeschger 2 (ca 23 ka). No record of sedimentation during MIS 2 was observed. Finally, bioclastic‐rich aeolianites (Unit U4, ca 10 to 5 ka; MIS 1), preserved on a coastal slope, were developed during the Holocene transgression (ca 10 to 5 ka; MIS 1). The studied sequence shows strong similarities with those of other Mediterranean sites; it is, however, one of the few where the main MIS 4 and MIS 3 climatic fluctuations are registered in the sedimentary record.     

Bolla Bollana boulder beds: A Neoproterozoic trough mouth fan in South Australia?

The Bolla Bollana Formation is an exceptionally thick (ca 1500 m), rift‐related sedimentary succession cropping out in the northern Flinders Ranges, South Australia, which was deposited during the Sturtian (mid Cryogenian) glaciation. Lithofacies analysis reveals three distinct facies associations which chart changing depositional styles on an ice‐sourced subaqueous fan system. The diamictite facies association is dominant, and comprises both massive and stratified varieties with a range of clast compositions and textures, arranged into thick beds (1 to 20 m), representing stacked, ice‐proximal glaciogenic debris‐flow deposits. A channel belt facies association, most commonly consisting of normally graded conglomerates and sandstones, displays scour and fill structure of ca 10 m width and 1 to 3 m depth: these strata are interpreted as channelized turbidites. Rare mud‐filled channels in this facies association bear glacially striated lonestones. Finally, a sheet heterolithics facies association contains a range of conglomerates through sandstones to silty shales arranged into clear, normally graded cycles from the lamina to bed scale. These record a variety of non‐channelized turbidites, probably occupying distal and/or inter‐channel locations on the subaqueous fan. Coarsening and thickening‐up cycles, capped by dolomicrites or mudstones, are indicative of lobe build out and abandonment, potentially as a result of ice lobe advance and stagnation. Dropstones, recognized by downwarped and punctured laminae beneath pebbles to boulders in shale, or in delicate climbing ripple cross‐laminated siltstones, are clearly indicative of ice rafting. The co‐occurrence of ice‐rafted debris and striated lonestones strongly supports a glaciogenic sediment source for the diamictites. Comparison to Pleistocene analogues enables an interpretation as a trough mouth fan, most probably deposited leeward of a palaeo‐ice stream. Beyond emphasizing the highly dynamic nature of Sturtian ice sheets, these interpretations testify to the oldest trough mouth fan recorded to date.     

Evaluation of the relative roles of global versus local sedimentary controls on Middle to Late Pleistocene formation of continental margin strata,Canterbury Basin,New Zealand

Determining the relative influence of eustasy versus local sedimentary processes on strata formation is a fundamental challenge in the study of continental margin stratigraphy. In this paper, the relative contribution of these factors on continental margin evolution during the Middle to Late Pleistocene is evaluated using samples from Integrated Ocean Drilling Program Expedition 317. Core‐logging, biostratigraphy and quantitative X‐ray diffraction mineralogy are used to delineate continental shelf sedimentary systems. Major lithological unconformities bound stratigraphic sequences that contain recurring compositional patterns and that resemble other examples of Middle to Upper Pleistocene sequences. However, a preliminary chronology suggests that sequence boundary formation cannot be linked ‘one to one’ with eustatic cycles and therefore these sequences can contain multiple ca 100 ka eustatic cycles. Smaller amplitude, higher frequency transitions in sediment composition are interpreted as stratigraphic sequences driven by more rapid perturbations in the interplay of accommodation and sediment supply; their stratigraphy is variable in time and across the shelf, suggesting a strong influence of local sedimentary forcing in their formation. Changes in sediment composition after the Middle Pleistocene Transition indicate that sediment transfer from onshore sources in the glaciated Southern Alps to the middle‐shelf occurred over a single 100 ka glacio‐eustatic cycle, with an additional 100 ka lag before the mineralogical signal was preserved on the outer‐shelf. This phenomenon is coincident with rapid shelf progradation in this basin, suggesting a causal relation between across‐shelf sediment transport and margin progradation. This is one of very few studies that provide insights at the core scale into the processes driving continental margin evolution during the Middle to Late Pleistocene. This work shows that compositional changes in mud‐dominated successions can lead to a sequence stratigraphic interpretation and the identification of high‐frequency sequences, which may not be possible using a conventional stratigraphic approach.     

Timing of arrival of the Danube to the Black Sea: Provenance of sediments from DSDP site 380/380A

Estimates for the timing of the arrival of Danube sediment to the Black Sea range from Messinian to Pleistocene; the river is currently the largest sediment contributor, supplying 88 MT/yr. We identify two changes in siltstone provenance‐sensitive heavy mineral abundances at DSDP site 380/380A in the southwest Black Sea. Comparison with modern river sediment compositions indicates that siltstones above 571.5 mbsf (metres below sea floor) were supplied by the Danube, while sediments below 651.0 m were sourced by other supply systems. Palaeo‐magnetic, ⁴⁰Ar/³⁹Ar and biostratigraphic data reveal that the influx of Danube‐supplied sediment to the southwest Black Sea began between 4.36 ± 0.19 Ma and 1 Ma ago (Zanclean–Calabrian). Our results provide an independent time constraint on palaeogeographic reconstructions of the Pannonian and Dacian basins, which acted as upstream sediment sinks, and suggest that significant volumes of Danube‐supplied sediment only started to reach the Black Sea at least 1 Ma after the Messinian Salinity Crisis (5.971–5.33 Ma) had ended.     

Distribution of contourite drifts on convergent margins: Examples from the Hikurangi subduction margin of New Zealand

Contourite drift systems form a significant component of the marine clastic sedimentary record. Although contourites form in all tectonic settings, few studies have described their development along convergent margins; such characterization is needed to underpin oceanographic and palaeoenvironmental studies in active settings. This study is the first to document contourite drift development along the Hikurangi subduction margin of New Zealand. Integration of bathymetric, seismic and well data enables five classes of drift to be recognized around the subduction wedge, occurring in three principal associations: (i) an upper slope drift association of giant elongate mounded (ca 150 km long, 50 km wide and up to 1100 m thick) and plastered drifts (ca 300 km long, 8 km wide and <600 m thick), which occurs upon and inboard of a major intrabasinal thrust‐cored high, whose long axis parallels the coast; shallow bottom currents disperse sub‐parallel to this axis; (ii) a spatiotemporally discontinuous association of confined and mounded hybrid drifts (ca 500 m long, <2 km wide and up to 500 m thick) that occurs along the mid‐to‐outer slope domain of the wedge, recording the interaction of along‐slope and downslope currents within trench‐slope basins; and (iii) a trench fill assemblage that implies the passage of abyssal bottom currents across a 40 km reach of the trench‐axial Hikurangi Channel‐levée, with associated modification of the channel form and of overbank sediment waves. The fundamental presence of contourites along this margin appears to depend on the orientation and strength of oceanographic bottom currents. However, drift type and evolution vary depending on the slope gradient and the presence of irregular seafloor topography created by tectonic structures. The documented drifts are generally smaller, less continuous, and develop more intermittently than similar styles of drifts documented on passive margins; this mode of occurrence may be characteristic of contourite development on convergent margins.     

Sedimentary record from Lake Hovsgol, NW Mongolia: Results from the HDP-04 and HDP-06 drill cores

The Hovsgol Drilling Project retrieved Pleistocene sediment section with the basal age of ca. 1 Ma from the Hovsgol rift basin, NW Mongolia. Detailed lithologic data on drill cores is presented and compared with analogous sediment facies in the radiocarbon-dated records of the last glacial–interglacial transition. Drill cores from two sites, presently in 239 m and 235 m water depth, represent somewhat different depositional settings. The shorter HDP-06 drill core (26 m) at the base of the gentler SE slope of the rift basin contains lithologic evidence for several recent lake lowstands on the order of −200 m. The longer HDP-04 drill core (81 m) some 8 km away at the base of the steep NW underwater slope is composed of finer sediments and contains at least 10 characteristic transitions from calcareous to carbonate-free (diatomaceous) layers. These lithologic transitions are interpreted here as signals of repeated Pleistocene lake transgressions in the Hovsgol basin. Transgressions appear to have been associated with lower sedimentation rates and with the deposition of thin turbidite beds at the drill site. Comparison of drill core lithology with the available seismic data shows reasonable agreement in terms of the number of lowstand events and the general trends of changing lake level. HDP-04 drill core retrieved shallow-water facies containing sand and carbonate oolites deposited at the time of the most dramatic mid-Pleistocene regression of the lake. At ca. 24 m core depth, this interval corresponds to a major basinwide angular unconformity apparent in the seismic pattern. Lake Hovsgol, a smaller sister rift lake of the grand Lake Baikal, has a confined local catchment, which makes it very sensitive to regional variations in the effective moisture. Consisting primarily of calcareous mud, the sedimentary record of Lake Hovsgol provides a unique regional sedimentary archive. Future multi-proxy studies of the Hovsgol sedimentary records will allow constraint of the mid-late Pleistocene history of the hydrologic budget in the Baikal region of continental interior Asia.     

Precession‐scale cyclicity in the fluvial lower Eocene Willwood Formation of the Bighorn Basin,Wyoming (USA)

Little is known about controls on river avulsion at geological time scales longer than 10⁴ years, primarily because it is difficult to link observed changes in alluvial architecture to well‐defined allogenic mechanisms and to disentangle allogenic from autogenic processes. Recognition of Milankovitch‐sale orbital forcing in alluvial stratigraphy would provide unprecedented age control in terrestrial deposits, and also exploit models of allogenic forcing enabling more rigorous testing of allocyclic and autocyclic controls. The Willwood Formation of the Bighorn Basin is a lower Eocene fluvial unit distinctive for its thick sequence of laterally extensive lithological cycles on a scale of 4 to 10 m. Intervals of red palaeosols that formed on overbank mudstones are related to periods of relative channel stability when gradients between channel belts and floodplains were low. The intervening drab, heterolithic intervals with weak palaeosol development are attributed to episodes of channel avulsion that occurred when channels became super‐elevated above the floodplain. In the Deer Creek Amphitheater section in the McCullough Peaks area, these overbank and avulsion deposits alternate with a dominant cycle thickness of ca 7·1 m. Using integrated stratigraphic age constraints, this cyclicity has an estimated period of ca 21·6 kyr, which is in the range of the period of precession climate cycles in the early Eocene. Previous analyses of three older and younger sections in the Bighorn Basin showed a similar 7 to 8 m spacing of red palaeosol clusters with an estimated duration close to the precession period. Intervals of floodplain stability alternating with episodes of large‐scale reorganization of the fluvial system could be entirely autogenic; however, the remarkable regularity and the match in time scales documented here indicate that these alternations were probably paced by allogenic, astronomically forced climate change.