Sporopollen Assemblages from the Cretaceous Yimin Formation of the Hailar Basin, Inner Mongolia, China

Three sporopollen assemblages are recognized for the first time from the Cretaceous Yimin Formation in the Hailar Basin of eastern Inner Mongolia. They are （in ascending order）： the lmpardecispora-Aequitriradites- Clawttipollenites assemblage; the Triporoletes-Pilosisporites-Asteropollis assemblage; and the Appendicisporites- Asteropollis-Tricolpites assemblage, distributed in Members 1, 2 and 3 of the Yimin Formation respectively. Recognition of this biostratigraphic sequence is very important for the division and correlation of the Yimin Formation in the basin. Meanwhile, the age of the Yimin Formation is considered to be Barremian to Early Albian based on the palynological data.     

Cretaceous Volcanic Events in Southeastern Jilin Province, China: Evidence from Single Zircon U-Pb Ages

Mesozoic volcanic rocks in southeastern Jilin Province are an important component of the huge Mesozoic volcanic belt in the northeastern area. Study of the age of their formation is of great significance to recognize Mesozoic volcanic rule in northeastern China. Along with the research of rare Mesozoic biota and extensive Mesozoic mineralization in western Liaoning, a number of researchers have focused on Mesozoic volcanic events. The authors studied the ages of the Cretaceous volcanic rocks in southeastern Jilin Province using single Zircon U-Pb. The result shows that the Sankeyushu Formation volcanic rocks in the Tonghua area are 119.2 Ma in age, the Yingcheng Formation in the Jiutai area 113.4±3.1 Ma, the Jinjiatun Formation in Pinggang Town of Liaoyuan City and the Wufeng volcanic rocks in the Yanji area 103.2±4.7 Ma and 103.6±1 Ma, respectively. Combined with the data of recent publication on volcanic rocks ages; the Cretaceous volcanic events in southeastern Jilin Province can be tentatively subdivided into three eruption periods： 119 Ma, 113 Ma and 103 Ma. The result not only provides important chronology data for subdividing Mesozoic strata in southeastern Jilin Province, establishing Mesozoic volcanic event sequence, discussing geological tectonic background, and surveying the relation between noble metals to the Cretaceous volcanic rocks, but also offers important information of Mesozoic volcanism in northeastern China.     

Structural Traps in Detachment Folds: a Case Study from the ‘Comb- and Trough-like’ Deformation Zone/s, East Sichuan, China

Detachment structures occur widely in the crust, and it is the commonest and most important deformation type developed in the region between orogenic belts and basins. The ‘comb-like’ and ‘tough-like’ fold belts in eastern Sichuan are caused by multi-layer detachment. The duplex structure is the most important deformation style in the region, exhibiting different characteristics from typical detachment structures. Different deformation styles, scales, and shortenings resulting from independent deformations of various detachment systems would lead to the phenomenon whereby most of the topographical heights in the region do not correspond to the structural heights in depth. Based on systematic structural analysis and combined with practical oil/gas prospecting, four types of structural traps are described from eastern Sichuan Province, which are: detachment and thrust trap; detachment folding trap; fault-flat blocking trap; and detachment layer trap. Meticulous studies on the deformation and distribution of detachment layers in the eastern Sichuan Province will contribute to oil/gas prospecting and selection of potential regions of marine-origin oil/gas prospecting in South China.     

Total gaseous mercury emissions from mercury-enriched soil in Guizhou, China

Guizhou is located in the Circum-Pacific Global Mercuriferous Belt, and mercury concentrations in soil in this area are enriched. In-situ total gaseous mercury （TGM） exchange fluxes between air and soil surface were intensively measured at four sampling sites in Guiyang from 21 May to 16 June, 2003, and five sites in the Lanmuchang mercury mining area in December 2002 and May 2003, respectively. The in-situ Hg flux measurement was conducted with a dynamic flux chamber （DFC） of quartz. Overall, net emissions were obtained from all sampling sites. Soil mercury concentration and solar radiation have been proved to be the two most important parameters to control mercury emissions from soil. Meanwhile, rain events can enhance mercury emission rate significantly.     

Association between multi-level inorganic arsenic exposure from drinking water and skin lesions in Inner Mongolia, China

Arsenic is one of the most important single-substance toxicants in the environment. In Inner Mongolia of China, 300000 residents are believed to drink water containing 〉50 μg/L. Skin lesions have been known as the most common consequences resulting from chronic exposure to arsenic. To clarify the prevalence of arsenic-induced skin lesions, it is important to assess the impact of this problem on the target population, and to make future planning. We evaluated the association between multi-level inorganic arsenic exposure from drinking water and skin lesions in an arsenic-affected area in Inner Mongolia, China. 109 and 32 subjects fi＇om high-level arsenic-affected （〉5 μg/L） village and low-level （≤50 μg/L） village were recruited and had detailed physical examination with special emphasis on arsenic-related skin lesions. Arsenic exposure was measured for each participant with As concentration of primary well and the duration of using the well was recorded. Arsenic-induced skin lesions including keratosis, pigmentation, and/or leucomelanosis were diagnosed in 56 and 3 subjects in the two villages, respectively. Logistic regression was conducted to calculate prevalence-odd ratios of skin lesions by levels of arsenic exposure with adjustment of sex, age group, smoking and duration of exposure. A consistent dose-response relationship between arsenic exposure level and skin lesion risk was observed.     

Temporo-Spatial Distribution of Rare Metal and REE Deposits in Xinjiang, Northwest China

Many rare metal and REE deposits have been found in the Altay orogenic belt, on the northern margin of the Tarim massif and in the Kunlun-Altun orogenic belt, constituting three very important rare metal-REE mineralization belts in western China. These deposits belong to various genetic types with complex ore-forming mechanism, and were formed in certain mineralization epochs. On the basis of a systematic sum-up of geologic and geochemical achievements and 40Ar-39Ar ages of potassium-rich minerals as well as whole-rock Rb-Sr dating results, the authors systematically analyzed the spatial distribution and mineralization epochs of rare metal-REE deposits in Xinjiang, northwestern China, and concluded that although the Hercynian rare metal-REE mineralizations in this area are very important, pre- and post-Hercynian (especially Indosinian and early Yanshanian) rare metal-REE mineralizations also have important theoretical and economic significance.     

The Petrology, Geochemistry, and Petrogenesis of E-MORB-type Mafic Rocks from the Guomangco Ophiolitic Mélange, Tibet

The Guomangco ophiolitic melange is situated in the middle part of the Shiquanhe- Yongzhu-Jiali ophiolitic melange belt （SYJMB） and possesses all the subunits of a typical Penrose- type ophiolite pseudostratigraphy. The study of the Guomangco ophiolitic melange is very important for investigating the tectonic evolution of the SYJMB. The mafic rocks of this ophiolitic melange mainly include diabases, sillite dikes, and basalts. Geochemical analysis shows that these dikes mostly have E-MORB major and trace element signatures; this is the first time that this has been observed in the SYJMB. The basalts have N-MORB and IAB affinities, and the mineral chemistry of harzburgites shows a composition similar to that of SSZ peridotites, indicating that the Guomangco ophiolitic melange probably originated in a back-arc basin. The Guomangco back-arc basin opened in the Middle Jurassic, which was caused by southward subduction of the Neo-Tethys Ocean in central Tibet. The main spreading of this back-arc basin occurred during the Late Jurassic, and the basalts were formed during this time. With the development of the back-arc basin, the subducted slab gradually retreated, and new mantle convection occurred in the mantle wedge. The recycling may have caused the metasomatized mantle to undergo a high degree of partial melting and to generate E- MORBs in the Early Cretaceous. E-MORB-type dikes probably crystallized from melts produced by about 20%-30% partial melting of a spinel mantle source, which was metasomatized by melts from low-degree partial melting of the subducted slab.     

CHARACTERIZATION OF DEFORMATION AND X-RAY PETROFABRICS IN THE MIDDLE PART OF THE WAHONGSHAN FAULT ZONE, QINGHAI PROVINCE, NORTHWESTERN CHINA

The Wahongshan fault zone in Qinghai province is one of the most important faults in westem China. In this paper, deformation and X-ray petrofabrics have been studied in the middle segment of the fault. The results show that the formation of the fault zones can be divided into two major stages: ductile shear deformation stage and brittle deformation stage. The early stage ductile shearing leads to the formation of the NW-NNW trending mylonite zones along the fault, which is intensely cut by the late-formed brittle faults. X-ray petrofabrics of rocks near the faults indicate that the minerals in the tectonites show a great degree of orientation in the alignment. The quartz, which is a very important mineral in the tectonites, is deformed by basal face gliding or near basal face gliding, and sometimes by prismatic face sliding, which indicates that the rocks are deformed in epithermal to mesothermal or mesothermal environment, and the dynamic recrystallization also plays an important role in the formation     

Evaporation Stage of Paleo-saline Lake in the Sichuan Basin, China: Insight from Fluid inclusions in Halite

Sichuan Basin is one of the most important marine–salt forming basins in China. The Simian and Triassic have a large number of evaporites. The Triassic strata have found a large amount of polyhalite and potassium-rich brine. However, no soluble potassium salt deposit were found. In this study, the halite in well Changping 3 which is located at the eastern part of the Sichuan basin was studied using the characteristics, hydrogen and oxygen isotopes of the fluid inclusion in halite to reconstruct the paleoenvironment. The salt rocks in well Changping 3 can be divided into two types: grey salt rock and orange salt rock. The result shows that the isotopic composition of the halite fluid inclusion is distinct from the global precipitation line reflecting that the salt formation process is under strong evaporation conditions and the climate is extremely dry. At the same time, compared with the hydrogen and oxygen isotopes of brine in the Sichuan Basin and the hydrous isotope composition of the inclusions in the salt inclusions of other areas in China, it is shown that the evaporation depth of the ancient seawater in the Sichuan Basin was high and reached the precipitation of potassium and magnesium stage.     

包头市典型工业区表层土壤中重金属污染状况及其潜在生态风险研究

为了解包头市典型工业企业对其所在地土壤中重金属含量的影响及污染现状,利用相关性系数对其表层土壤中7种重金属(Cu、Zn、Pb、Cr、Cd、Mn、Ni)来源进行研究,并采用内梅罗综合污染指数法和潜在生态危害指数对其污染状况进行评价。结果表明,7种重金属含量平均值均高于内蒙古土壤背景值,其中Cd、Mn、Ni超标率已达100%,而Cu、Pb、Zn的超标率分别为97%、93%和93%,只有Cr超标率较低(53%),污染程度依次为CdPbCuNiZnMnCr,其中Pb和Cd为重度污染,Cu、Zn、Ni为中度污染,Cr、Mn为轻度污染;Cu、Zn、Cr、Mn、Ni可能同时来自工业生产和交通运输两个源,而Pb和Cd除上述来源外,燃煤烟气的排放有较大贡献。潜在生态危害依次为CdPbCuNiCrZnMn,其中Cd的潜在生态风险最大,应予以高度重视,其他金属的风险均为轻微。     

固体聚合膜电解浓集法测量天然水中低含量氚的化学淬灭效应研究

固体聚合膜电解浓集法是浓缩氚含量较低(1 Bq/m~3)的天然水样的常用方法,但因水样自身含有杂质离子或电解装置聚合膜带入杂质进入浓集液,使浓集液偏酸性,在测量过程中易产生化学淬灭效应,导致氚的测量值偏低。本文研究了水样自身存在的杂质离子和聚合膜上残留的杂质离子、样品溶液的pH值及其电导率所产生的化学淬灭效应的影响,实验表明,为减少化学淬灭效应,提高测量低含量氚的准确性,需保证水样溶液呈中性,电导率≤1μS/cm,同时避免杂质沉积在聚合膜上。如果水样溶液的pH值偏酸性、电导率大于1μS/cm,可采用酸碱混合型离子交换树脂去除水样中自身的杂质;对于聚合膜引入的杂质,可在电解后的水样中加入微量氨水将其pH值调节至中性。     

Multivariate analysis of heavy metals in surface sediments from lower reaches of the Xiangjiang River, southern China

The concentrations of heavy metals (Cr, Mn, Co, Ni, Cu, Zn, Cd, and Pb) in 16 samples collected from the lower reach (Changsha–Xiangtan–Zhuzhou section) of the Xiangjiang River in southern China were determined by high-resolution inductively coupled plasma mass spectroscopy (HR-ICPMS). Multivariate analysis, such as principal component analysis and cluster analysis, coupled with correlation coefficient analysis, was used to analyze the analytical data and to identify possible pollution sources of heavy metals. The results showed that the eight studied heavy metals accumulated in the sediments from the lower Xiangjiang River, especially Mn, Cu, Zn, Pb and Cd, which were 2.0–2.6, 1.7–2.6, 3.5–3.8, 3.2–3.6 and 189.5–152.8 times the soil trace element background for Hunan Province and UCC background values, respectively. Principal component analysis and cluster analysis, coupled with correlation coefficient analysis, revealed that the sediments from lower Xiangjiang River were mainly influenced by two sources: Cr, Co, Ni, Cu, Zn, Cd and Pb mainly originated from industrial sources, whereas Mn was derived from both industrial and natural sources, but mainly from natural sources due to weathering and erosion.     

Heavy metal history from cores in Wellington Harbour,New Zealand

Analysis of ten heavy metals (Ag, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sb, Zn) in six sediment cores from Wellington Harbour show both anthropogenic enrichments and diagenetic modifications. Absolute concentrations determined by two methods, x-ray fluorescence and acid leaching for bioavailability, are not comparable. However, vertical trends in concentrations of the cored sediment are comparable. To assess levels of anthropogenic pollution, enrichment factors (enriched concentrations in upper core divided by background levels in lower core) are preferred over index of accumulation (I _geo) values because preindustrial or background levels of heavy metals are well constrained. The ten metals are placed into three groups: (1) Cu, Pb, and Zn, which show the most anthropogenic enrichment; (2) As, Cd, Cr, Ni, and Sb, which are often associated with anthropogenic pollution but show only minor enrichment; and (3) Fe and Mn, which are diagenetically enriched. Assuming harbor waters are well mixed, anthropogenic enrichments of Cu, Pb, and Zn, are time correlative, but the degree of enrichment depends on the method of analysis and core location. Levels of As, Cd, Pb, and Zn show small variations in preindustrial sediments that are not related to changes in grain size and probably result from changes in the oxidation-reduction potential of the sediments and salinity of the pore waters.     

Heavy metal geochemistry of the acid mine drainage discharged from the Hejiacun uranium mine in central Hunan,China

The acid mine drainage (AMD) discharged from the Hejiacun uranium mine in central Hunan (China) was sampled and analyzed using ICP-MS techniques. The analyzing results show that the AMD is characterized by the major ions Fe_Total, Mn, Al and Si, and is concentrated with heavy metals and metalloids including Cd, Co, Ni, Zn, U, Cu, Pb, Tl, V, Cr, Se, As and Sb. During the AMD flowing downstream, the dissolved heavy metals were removed from the AMD waters through adsorption onto and co-precipitation with metal-oxhydroxides coated on the streambed. Among these metals, Cd, Co, Ni, Zn, U, Cu, Pb and Tl are negatively correlated to pH values, and positively correlated to major ions Fe, Al, Si, Mn, Mg, Ca and K. The metals/metalloids V, Cr, Se, As and Sb are conservative in the AMD solution, and negatively-correlated to major ions Na, Ca and Mg. Due to the above different behaviors of these chemical elements, the pH-negatively related metals (PM) and the conservative metals (CM) are identified; the PM metals include Cd, Co, Ni, Zn, U, Cu, Pb and Tl, and the CM metals V, Cr, Se, As and Sb. Based on understanding the geochemistry of PM and CM metals in the AMD waters, a new equation: EXT = (Acidity + PM)/pH + CM × pH, is proposed to estimate and evaluate extent of heavy-metal pollution (EXT) of AMD. The evaluation results show that the AMD and surface waters of the mine area have high EXT values, and they could be the potential source of heavy-metal contamination of the surrounding environment. Therefore, it is suggested that both the AMD and surface waters should be treated before they are drained out of the mine district, for which the traditional dilution and neutralization methods can be applied to remove the PM metals from the AMD waters, and new techniques through reducing the pH value of the downstream AMD waters should be developed for removal of the CM metals.     

Geochemical variations of major and trace elements in recent sediments,off the Gulf of Mannar,the southeast coast of India

The Gulf of Mannar along the Tuticorin coast is a coral base of the southeast coast of India. To obtain a preliminary view of its environmental conditions, geochemical distribution of major elements (Si, Al, Fe, Ca, Mg, Na, K, P), trace elements (Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd) and acid leachable elements (Fe, Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd) were analyzed in surface sediment samples from two seasons. Geochemical fractionation confirmed the lithogenic origin of metals, which were mainly associated with the detrital phase. The sediments in the gulf are sandy with abundant calcareous debris, which controls the distribution of total and acid leachable elements. Enrichment factors relative to crust vary by a magnitude of two to three and the presence of trace metals indicates the input of Cr, Pb, Cd, Cu and Zn in both forms through industrial activities. Factor analysis supports the above observation with higher loadings on acid leachable elements and its association with CaCO₃. The increase in concentration of trace metals (Cr, Pb, Cd, Cu, Co, Ni, Zn) along the Gulf of Mannar indicates that the area has been contaminated by the input from riverine sources and the industries nearby. The present study indicates that other sources should be evaluated in the long-term monitoring program.     

Heavy metals contamination in road dust in Delhi city,India

Road dust samples were collected from four different areas having different landuse patterns: industrial, heavy traffic, residential and mixed use in Delhi city of India. The samples were analyzed for Ba, Co, Cr, Cu Fe, Mn, Ni, Pb and Zn by ICP-AES. Results indicate high levels of Co, Cr, Cu, Mn and Ni in samples collected from industrial area. Ba, Pb and Zn showed higher concentration levels in heavy traffic area while Fe did not show any discernible variation between the localities. The concentrations of Fe, Mn, Ba, Zn, Cr, Cu, Pb, Ni and Co showed a decreasing trend. The content of heavy metals was comparable to those in other cities in the world. A multivariate statistical approach which includes Pearson’s correlations and principal component analysis was used to identify the possible sources of metals in the road dust. Enrichment factors were estimated for further confirming the sources of contamination. Significant positively correlations between road dust metals Cu–Mn–Co–Cr–Ni suggest that major common source of origin is industrial activities. A meaningful correlation between Ba and Zn, and a moderate positive correlation between Pb and Ba indicate the influence of traffic activities. Enrichment factors calculation indicated that Pb, Cu, Cr and Zn are moderately enriched whereas Co, Ni and Mn are less enriched while Ba exhibited very low enrichment in the dust samples. The results indicate that industrial and vehicular traffic are the two major sources. Traffic appears to be responsible for the high levels of Zn, Cu and Ba. High concentration of Co, Cr, Cu and Mn may be due to industrial sources.     

Application of multivariate geostatistics in the investigation of heavy metal contamination of roadside dusts from selected highways of the Greater Toronto Area, Canada

A good understanding of roadside soil contamination and the location of pollution sources is important for addressing many environmental problems. The results are reported here of an analysis of the content of metals in roadside dust samples of four major highways in the Greater Toronto area (GTA) in Ontario, Canada. The metals analyzed are Pb, Zn, Cd, Ni, Cr, Cu, Mn, and Fe. Multivariate geostatistical analysis [correlation analysis (CA), principal component analysis (PCA), and hierarchical cluster analysis (HCA)] were used to estimate soil chemical content variability. The correlation coefficient shows a positive correlation between Cr–Cd, Mn–Fe, and Fe–Cu, while negatively between Zn–Cd, Mn–Cd, Zn-Cr, Pb–Zn, and Ni–Zn. PCA shows that the three eigenvalues are less than one, and suggests that the contamination sources are processing industries and traffic. HCA classifies heavy metals in two major groups. The cluster has two larger subgroups: the first contains only the variables Fe, Mn, Cu, Cr, Ni, and Pb, and the second includes Cd and Zn. The geostatistical analysis allows geological and anthropogenic causes of variations in the contents of roadside dust heavy metals to be separated and common pollution sources to be identified. The study shows that the high concentration of traffic flows, the parent material mineralogical and chemical composition, and land use are the main sources for the heavy metal concentration in the analyzed samples.     

Release of heavy metals during weathering of the Lower Cambrian Black Shales in western Hunan,China

Weathering of heavy metal enriched black shales may be one of the most important sources of environmental contamination in areas where black shales are distributed. Heavy metal release during weathering of the Lower Cambrian Black Shales (LCBS) in western Hunan, China, was investigated using traditional geochemical methods and the ICP-MS analytical technique. Concentrations of 16 heavy metals, 8 trace elements and P were measured for samples from selected weathering profiles at the Taiping vanadium ore mine (TP), the Matian phosphorous ore mine (MT), and Taojiang stone-coal mine (TJ). The results show that the bedrock at these three profiles is enriched with Sc, V, Cr, Co, Ni, Cu, Zn, Pb, Th, U, Mo, Cd, Sb, Tl, and P. Based on mass-balance calculation, the percentages of heavy metals released (in % loss) relative to immobile element Nb were estimated. The results show significant rates of release during weathering of: V, Cr, Co, Ni, Cu, Zn, U, Mo, Cd, Sn, Sb, and Tl for the TP profile; Sc, Cr, Mn, Co, Ni, Cu, Zn, Pb, Th, Cd, and Sn for the MT profile; and Sc, Mn, Co, Ni, Zn, Th, Cd, Sn, and Tl for the TJ profile. Among these heavy metals, Co, Ni, Zn, Cd, and Sn show very similar features of release from each of the three weathering profiles. The heavy metals released during weathering may affect the environment (especially topsoil and surface waters) and are possibly related to an observed high incidence of endemic diseases in the area.     

大亚湾表层沉积物重金属元素形态特征、控制因素及风险评价分析

为了解大亚湾表层沉积物中重金属的污染状况,对大亚湾海域23个点位表层沉积物中7种重金属元素（Cr、Ni、Cu、Pb、Zn、Cd、As）的质量分数、形态特征、来源控制因素以及潜在生态风险进行了研究。采用优化BCR提取法分析重金属元素赋存形态,并依据各种重金属元素的形态特征与沉积物基质属性进行了相关因子分析,了解其分布的控制因素。结果表明：大亚湾沉积物重金属元素呈现环带状分布特征,从岸向湾内逐渐减小;重金属元素质量分数的高值区主要分布于大鹏澳、哑铃湾及范和港附近;重金属元素赋存形态中Cr、Ni、Cu、Zn、As主要以残渣态存在,Pb主要以可还原态存在,Cd主要以酸提取态存在;7种重金属元素各自非残渣态所占比率从大到小为Pb(78.83%)、Cd(78.65%)、Cu(48.54%)、Zn(48.10%)、Ni(38.31%)、Cr(28.43%)、As(27.76%),即Pb最高,As最低,表明Pb的迁移性最强;通过因子分析,大亚湾重金属主要为沿岸自然风化产物的输入,其次为工业废水及养殖污水。运用酸提取态风险评估法对重金属元素潜在生态风险进行评价,发现研究区所选重金属元素综合风险评价Cd为高风险,其余重金属为中-低风险等级。