利用核磁共振方法探查岩溶水

核磁共振（ＮＭＲ）找水方法是目前唯一直接找水的物探新方法,该方法可以探查各种类型的地下水。本文仅论述了在岩溶发育区常规电阻率方法找水时遇到的地质干扰。ＮＭＲ找水方法的原理,仪器的组成,并以实例说明了ＮＭＲ找水方法探查岩溶水的效果。     

利用核磁共振方法探查基岩裂隙水

基岩裂隙水是我国分布最为广泛的地下水类型之一。本文阐述了基岩裂隙水的特点：含水层产状不规则、其赋存空间介质不均匀、同一含水层埋深不同、地下水运动状态复杂等。这些特殊的地质、地球物理特征,给常用的物探找水方法带来许多困难。本文通过对直接找水的新方法一核磁共振（ＮｕｃｌｅａｒＭａｇｎｅｔｉｃ　Ｒｅｓｏｎａｎｃｅ,缩写为ＮＭＲ）测深与间接找水的电阻率测深的对比分析,论述了ＮＭＲ测深直接找水的实质。并以实例说明了ＮＭＲ测深在探查基岩裂隙水中的应用效果。     

地面核磁共振技术勘查西北干旱浅层地下水效果浅析

地面核磁共振技术勘查地下水是一种新的应用领域,该技术是目前国际上唯一的能直接进行地下水勘查的技术.我所自一九九九年引进法国Numis仪器以来,先后在陕西黄土区、宁南黄土区等地开展寻找不同类型浅层地下水的试验工作,取得了一定的野外成果.本文是在分析总结这些成果的基础上,针对存在的问题如强干扰背景下勘查结果的可靠性,同一测点"8”字型与"正方形”发射线框二者勘查结果比较等方面进行探讨分析.     

二维阵列线圈核磁共振地下水探测理论研究

核磁共振法(Magnetic Resonance Sounding, MRS)是一种直接探测地下水的地球物理方法,目前只能对水平层状的含水层进行一维测深,对于尺寸小于线圈直径的二维或三维含水构造成像时,其灵敏度和横向分辨率很低.本文从研究二维阵列线圈核磁共振地下水探测方式的可行性出发,推导了地面发射线圈产生的椭圆极化激发场和阵列接收线圈的核磁共振响应核函数的表达式,数值计算了二维阵列线圈测量方式的MRS信号初始振幅图像和探测灵敏度,通过与二维发射/接收同一线圈测量方式对比,得到结论如下:二维阵列线圈测量方式可直接确定地下含水构造的水平位置,但需更大的激发电流强度和接收灵敏度;当中浅层(2,以上三种分辨率均由仪器噪声水平所决定.通过实施增加接收线圈的数量和匝数、提高激发脉冲矩和接收灵敏度等改进措施,现有的仪器系统可用二维阵列线圈测量方式.本文提出的理论和方法,将促使二维阵列线圈核磁共振方法在地下暗河、喀斯特溶洞和堤坝渗漏等二维或三维含水构造快速探测方面得到应用.     

磁共振用于医学成像与地面找水方法的技术对比研究

目的 医学核磁共振与地面核磁共振找水是核磁共振技术应用的不同领域。本文通过对二者在方法原理、技术、应用等方面的对比研究，提出了地面核磁共振找水工作建议。     

地面核磁共振技术发展述评

核磁共振技术在医学、地质等方面都有广泛的应用.运用核磁共振技术找寻地下水资源,开创了用地球物理方法直接找水的先河.地面核磁共振技术是目前唯一能直接探测地下水的地球物理方法.本文通过对核磁共振技术在国内外的应用和发展现状的介绍,总结了地面核磁共振技术现在存在的问题及其影响,同时提出了该技术今后的发展前景.     

导电性影响的地面核磁共振反演

导电性影响对实际的地面核磁共振反演非常重要. 在导电条件下,导出了地面核磁共振感应电动势的平方是含水率分布的二次型. 通过进一步分析,我们将其对含水率的灵敏度用显式表示出来,为由核磁感应电动势利用迭代技术快速求解含水率分布奠定了理论基础. 数值模拟结果表明,在自由空间与导电条件下,采用非线性反演技术获得的含水率分布与理论模型都有非常好的一致性.     

基于椭圆极化的核磁共振找水理论研究(英文)

核磁共振找水是目前唯一能够直接探测地下水的地球物理方法,本文在weichman等人改进的核磁共振理论的基础上,应用经典的Chave算法对含有贝塞尔函数的积分核进行积分,求得了地下磁场和垂直激发场的空间分布。通过计算地下垂直激发场的椭圆极化率,验证了垂直激发场的椭圆极化效应,发现当地下电导率较大时椭圆极化效应将导致垂直激发场严重畸变;地下垂直激发场的正旋和逆旋分量显示了椭圆极化效应对核磁共振找水激发和接收上的不同影响,发射线圈和接收线圈间的延迟相位揭示了相位延迟效应的存在性及其相关性质。将以上理论应用到共圈模式下的核磁共振找水响应函数中,得到了地下氢核的扳倒角、地面核磁共振找水核函数和单一含水层模型的响应曲线,发现椭圆极化效应和相位延迟效应将导致核磁共振找水响应发生明显改变,因此对核磁共振找水理论和实际研究考虑椭圆极化效应是十分必要的。     

核磁共振找水技术的研究现状与发展趋势

近20多年来,用核磁共振(Nuclear Magnetic Resonance,NMR)方法形成的一种直接非侵害性的探测地下水的地球物理新技术,与传统的地球物理探测地下水的方法相比具有高分辨力、高效率、信息量丰富和解的唯一性等优点,是一种很有发展前景的找水方法技术.我国的水资源短缺,对地下水资源的勘探、开发与利用十分重视,已将核磁共振找水技术研究列入国家十一五科技支撑计划.本文在广泛收集迄今为止的国内外大量资料的基础上,并根据作者近年来有关核磁共振找水技术的研究经历,综述了核磁共振找水技术的发展历史、现状和发展趋势,以推进我国核磁共振找水技术的发展.     

CSAMT法和高密度电法探测地下水资源

我国乃至世界目前都面临着严重的水资源的短缺，利用新技术、新方法合理勘探开发并利用水资源，是经济腾飞的关键。本文概述了CSAMT方法和近几年来发展起来的高密度电阻率找水方法，列举了两种方法应用的的实例。实践表明这两种方法是水资源勘查的有效手段。     

Inversion of resistivity in Magnetic Resonance Sounding

Magnetic Resonance Sounding (MRS, or Surface Nuclear Magnetic Resonance - SNMR) is used for groundwater exploration and aquifer characterization. Since this is an electromagnetic method, the excitation magnetic field depends on the resistivity of the subsurface. Therefore, the resistivity has to be taken into account in the inversion: either as a priori information or as an inversion parameter during the inversion process, as introduced in the presented paper. Studies with synthetic data show that water content and resistivity can be resolved for a low resistive aquifer even using only the amplitude of the MRS signal. However, the inversion result can be significantly improved using amplitude and phase of the MRS signal. The successful implementation of the inversion for field data shows that the resistivities derived from MRS are comparable to those from conventional geoelectric methods such as DC resistivity and transient electromagnetic. By having information about both the resistivity and the water content, MRS inversions give information about the quality of the water in the aquifer. This is of utmost interest in hydrogeological studies as this specific information cannot be determined solely by geoelectric measurements, due to the nonunique dependence of resistivity on water content and salinity.     

核磁共振技术在环境质量检测中的应用研究

核磁共振(NuclearMagneticResonance,缩写为NMR)技术是当今世界上的尖端技术。本文概述了NMR技术的应用现状,重点论述了NMR技术在环境质量检测中应用的理论依据和NMR方法的应用原理,并以实例说明了应用NMR技术在检测地下水烃类污染和空气污染的应用效果,最后展望了扩大NMR技术领域应用的前景,并建议加强应用技术的理论研究和新仪器的研制工作,为改善环境质量降低检测成本提供新的技术手段。     

致密砂岩储层CO2驱油特征的核磁共振实验研究

利用核磁共振技术对致密砂岩储层不同渗透率级别基质岩心和裂缝基质岩心不同驱替压力下CO2驱油特征进行了研究,简述核磁共振原理及实验方法。表明:致密砂岩储层特低、超低渗透基质岩心在初始CO2驱替压力下,岩心毛细孔隙和微毛细孔隙区间的油不同程度被采出,随着CO2驱替压力增大,特低、超低渗透基质岩心毛细孔隙区间油的采出程度不断增加且累积采出程度不同。裂缝致密砂岩储层岩心,裂缝和毛细孔隙区间的油在初始CO2驱替压力下,岩心裂缝中的油及毛细孔隙中的部分油被驱替出来,CO2驱替压力提高毛细孔隙、微毛细区间油的采出程度和累积采收程度较小。致密砂岩储层特低、超低渗透基质岩心和裂缝致密砂岩储层岩心,随着CO2驱替压力增大毛细孔隙区间的部分剩余油成正比增加进入到微毛细孔隙区间改变储层剩余油分布。核磁共振技术能够深入研究致密砂岩储层CO2不同驱替压力阶段,岩心裂缝、毛细孔隙区间、微毛细孔隙区间油的采出程度和剩余油分布情况,对于研究致密砂岩储层微观驱油机理具有较重要的价值。     

Pore size distributions and hydraulic conductivities of rocks derived from Magnetic Resonance Sounding relaxation data using multi-exponential decay time inversion

In hydrogeology there is a variety of empirical formulae available for determination of hydraulic conductivity of porous media, all based on the analysis of grain size distributions of aquifer materials. Sensitivity of NMR measurements to pore sizes makes it a good indicator of hydraulic conductivity. Analogous to laboratory NMR, Magnetic Resonance Sounding (MRS) relaxation data are of a multi-exponential (ME) nature due to the distribution of different pore sizes in an investigated rock layer. ME relaxation behaviour will also arise due to the superposition of NMR signals which originate from different layers. It has been shown, that both kinds of ME behaviour coexist in MRS and can principally be separated by ME inversion of the field data. Only a few publications exist that have proposed approaches to qualitatively and quantitatively estimate petrophysical parameters such as the hydraulic conductivity from MRS measurements, i.e. MRS porosity and decay times. The so far used relations for the estimation of hydraulic conductivity in hydrogeology and NMR experiments are compared and discussed with respect to their applicability in MRS. Taking into account results from a variety of laboratory NMR and MRS experiments mean rock specific calibration factors are introduced for a data-base-calibrated estimation of hydraulic conductivity when no on-site calibration of MRS is available. Field data have been analysed using conventional and ME inversion using such mean calibration values. The results for conventional and ME inversion agree with estimates obtained from well core analysis for shallow depths but are significantly improved using a ME inversion approach for greater depths.     

The underground application of Magnetic Resonance Soundings

The potential application of MRS technology in locating waterbearing fractures in underground mines is studied. The determination of the presence of water ahead of mining is important to prevent accidents and to ensure higher efficiency in mining operations. In the usual surface based measurements, with horizontal loop and water layer, the geometry of the problem can be summarized by the value of the inclination of the Earth magnetic field. For MRS measurements under the geometric conditions associated with underground mining, where the loop is non-horizontal, the geometry can be described in an effective inclination that can be expressed in terms of the Earth magnetic inclination and declination, together with two further parameters that characterize the orientation of the mine wall. We examine the consequences of the different geometries on the MRS signal. Since the loop size is severely restricted in underground conditions, the feasible target depth is also severely limited. The consequences of the fractured hard rock aquifer conditions, typical of deep mining or tunneling environments, are also examined. The overall conclusion is that in underground MRS applications the signal strength is too small to enable the practical identification of fractures containing large volumes of water ahead of the mining face.     

随钻核磁共振测井的地层界面响应特征

随钻核磁共振测井的地层界面响应特征对地质导向和原状地层评价具有重要意义,但钻井轨迹的复杂性决定其响应特征是多重因素综合作用的结果,且较难直接给出统一显式表达式.本文根据仪器在地层内的运动特征,建立了基于敏感区域体积元的随钻核磁共振测井响应方程和离散化计算方法;通过正演、反演结合的数值模拟,研究了单、双界面水平层状地层中,不同井斜角度、天线长度和目标地层厚度等条件下的随钻核磁共振测井响应特征,对关键结果给出了成立条件和定量关系.随钻核磁共振测井在斜井段中的T2分布和孔隙度响应与直井中差异明显;井斜角越大,视地层厚度越大,地层界面在T2分布和孔隙度曲线上的过渡段越长,T2分布过渡起始位置已不能确定界面深度;仪器的最高纵向分辨率与天线长度、井眼条件和仪器参数有关;受围岩作用影响,较薄目的层的测井响应特征上可能出现异常"夹层".基于分析结果,对随钻核磁共振测井资料解释提出了建议.