首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 156 毫秒
1.
Abstract– We detail the Kamil crater (Egypt) structure and refine the impact scenario, based on the geological and geophysical data collected during our first expedition in February 2010. Kamil Crater is a model for terrestrial small‐scale hypervelocity impact craters. It is an exceptionally well‐preserved, simple crater with a diameter of 45 m, depth of 10 m, and rayed pattern of bright ejecta. It occurs in a simple geological context: flat, rocky desert surface, and target rocks comprising subhorizontally layered sandstones. The high depth‐to‐diameter ratio of the transient crater, its concave, yet asymmetric, bottom, and the fact that Kamil Crater is not part of a crater field confirm that it formed by the impact of a single iron mass (or a tight cluster of fragments) that fragmented upon hypervelocity impact with the ground. The circular crater shape and asymmetries in ejecta and shrapnel distributions coherently indicate a direction of incidence from the NW and an impact angle of approximately 30 to 45°. Newly identified asymmetries, including the off‐center bottom of the transient crater floor downrange, maximum overturning of target rocks along the impact direction, and lower crater rim elevation downrange, may be diagnostic of oblique impacts in well‐preserved craters. Geomagnetic data reveal no buried individual impactor masses >100 kg and suggest that the total mass of the buried shrapnel >100 g is approximately 1050–1700 kg. Based on this mass value plus that of shrapnel >10 g identified earlier on the surface during systematic search, the new estimate of the minimum projectile mass is approximately 5 t.  相似文献   

2.
Oued Awlitis 001 is a highly feldspathic, moderately equilibrated, clast‐rich, poikilitic impact melt rock lunar meteorite that was recovered in 2014. Its poikilitic texture formed due to moderately slow cooling, which judging from textures of rocks in melt sheets of terrestrial impact structures, is observed in impact melt volumes at least 100 m thick. Such coherent impact melt volumes occur in lunar craters larger than ~50 km in diameter. The composition of Oued Awlitis 001 points toward a crustal origin distant from incompatible‐element‐rich regions. Comparison of the bulk composition of Oued Awlitis 001 with Lunar Prospector 5° γ‐ray spectrometer data indicates a limited region of matches on the lunar farside. After its initial formation in an impact crater larger than ~50 km in diameter, Oued Awlitis 001 was excavated from a depth greater than ~50 m. The cosmogenic nuclide inventory of Oued Awlitis 001 records ejection from the Moon 0.3 Ma ago from a depth of at least 4 m and little mass loss due to ablation during its passage through Earth's atmosphere. The terrestrial residence time must have been very short, probably less than a few hundred years; its exact determination was precluded by a high concentration of solar cosmic ray‐produced 14C. If the impact that excavated Oued Awlitis 001 also launched it, this event likely produced an impact crater >10 km in diameter. Using petrologic constraints and Lunar Reconnaissance Orbiter Camera and Diviner data, we test Giordano Bruno and Pierazzo as possible launch craters for Oued Awlitis 001.  相似文献   

3.
Pangboche crater (17.2°N, 226.7°E; 10.4 km dia.) lies close to the summit of Olympus Mons volcano, Mars, at an elevation of ~20.9 km above the datum. Given a scale height of 11.1 km for the atmosphere, this relatively large fresh crater most likely formed at an atmospheric pressure <1 mbar in essentially volatile‐free young lava flows. Detailed analysis of Pangboche crater from High Resolution Imaging Science Experiment (HiRISE) and Context Camera (CTX) images reveals that volatile‐related features (e.g., fluidized ejecta layers and pitted floor material) are absent. In contrast, abundant impact melt occurs on the floor, inner walls, and rim of the crater, and there is an extensive field of secondary craters that extend up to approximately 45 km from the rim crest. All of these attributes argue that it was the absence of volatiles in the target rocks at the time of crater formation, rather than the thin atmosphere, which had a controlling influence on crater morphology. Digital elevation data derived from the CTX images reveal that Pangboche crater has a depth of about 954 m (depth/diameter = approximately 0.092) and that uplifted target rocks comprise about 58% of the relief of the 180 m‐high north rim. As the target material comprised a sequence of layered lava flows, Pangboche crater may well represent the best crater on Mars for direct comparison with craters formed on the Moon (permitting variations in gravitational effects to be investigated) or on Mercury (allowing the role of the atmosphere to be studied).  相似文献   

4.
The Ilumetsa site, in Estonia, consists of two round, rimmed structures that are 725 m apart. The structures are listed as proven impact craters in the Impact Earth database, despite lack of commonly accepted, unequivocal proof of extraterrestrial collision identified at this location. We excavated trenches though the Ilumetsa Large and Ilumetsa Small structures and found small pieces of charcoal within the putative proximal ejecta in both structures, in a similar geological setting as previously identified charcoal in Kaali (Losiak et al. 2016) and Morasko craters (see Szokaluk et al. 2019). Our 14C dating of charcoal allowed us to conclude that these crater‐like features formed simultaneously between 7170 and 7000 cal. years bp , about 7 ka after deglaciation of this area. A ground penetrating radar survey of the nearby bog shows that no additional Ilumetsa structures bigger than 40 m exist. Geochemical studies of the ejecta and a search using a metal detector did not reveal any clear indication of extraterrestrial material. This suggests Ilumetsa may have been formed by an impact of stony‐iron or stony body, which got significantly weathered in a wet‐temperate climate. The mystery of the formation of the structures at Ilumetsa remains; however, due to significant circumstantial evidence discussed herein, we are confident to call it a “probable” impact site.  相似文献   

5.
Confirmed small impact craters in unconsolidated deposits are rare on Earth, and only a few have been the subjects of detailed investigations. Consequently, our knowledge of indicators permitting unambiguous identification of such structures is limited. In this work, detailed geological mapping was performed in the area of the Morasko craters, of which the largest crater is of about 96 m diameter. These craters were formed in the mid‐Holocene (~5000 yr ago) in unconsolidated sediments of a glacial terminal moraine. Fragments of the impactor—an iron meteorite—have been found in the craters’ vicinity for many decades. Despite numerous studies of the meteorite, no detailed research concerning the geological structure around the craters and of the ejecta deposits has been undertaken. The new data, including evaluation of over 52 sediment cores and 260 shallow drillings, permit the identification of four main sediment types: Neogene clays, diamicton with Neogene clay clasts containing charcoal pieces, diamicton without clasts, and sand with locally preserved paleosoil and charcoal pieces. Based on sedimentological properties, the ejecta deposits are mainly identified as diamicton with Neogene clay clasts, described as lithic impact breccia, covering locally preserved pre‐impact soil. Moreover, crater sections characterized by inverse stratigraphy of sediments are identified as belonging to overturned flaps.  相似文献   

6.
We investigate the elevated crater rims of lunar craters. The two main contributors to this elevation are a structural uplift of the preimpact bedrock and the emplacement of ejecta on top of the crater rim. Here, we focus on five lunar complex mare craters with diameters ranging between 16 and 45 km: Bessel, Euler, Kepler, Harpalus, and Bürg. We performed 5281 measurements to calculate precise values for the structural rim uplift and the ejecta thickness at the elevated crater rim. The average structural rim uplift for these five craters amounts to SRU = 70.6 ± 1.8%, whereas the ejecta thickness amounts to ET = 29.4 ± 1.8% of the total crater rim elevation. Erosion is capable of modifying the ratio of ejecta thickness to structural rim uplift. However, to minimize the impact of erosion, the five investigated craters are young, pristine craters with mostly preserved ejecta blankets. To quantify how strongly craters were enlarged by crater modification processes, we reconstructed the dimensions of the transient crater. The difference between the transient crater diameter and the final crater diameter can extend up to 11 km. We propose reverse faulting and thrusting at the final crater rim to be one of the main contributing factors of forming the elevated crater rim.  相似文献   

7.
Abstract— The 50,000 year old, 1.8 km diameter Lonar crater is one of only two known terrestrial craters to be emplaced in basaltic target rock (the 65 million year old Deccan Traps). The composition of the Lonar basalts is similar to martian basaltic meteorites, which establishes Lonar as an excellent analogue for similarly sized craters on the surface of Mars. Samples from cores drilled into the Lonar crater floor show that there are basaltic impact breccias that have been altered by post‐impact hydrothermal processes to produce an assemblage of secondary alteration minerals. Microprobe data and X‐ray diffraction analyses show that the alteration mineral assemblage consists primarily of saponite, with minor celadonite, and carbonate. Thermodynamic modeling and terrestrial volcanic analogues were used to demonstrate that these clay minerals formed at temperatures between 130°C and 200°C. By comparing the Lonar alteration assemblage with alteration at other terrestrial craters, we conclude that the Lonar crater represents a lower size limit for impact‐induced hydrothermal activity. Based on these results, we suggest that similarly sized craters on Mars have the potential to form hydrothermal systems, as long as liquid water was present on or near the martian surface. Furthermore, the Fe‐rich alteration minerals produced by post‐impact hydrothermal processes could contribute to the minor iron enrichment associated with the formation of the martian soil.  相似文献   

8.
The about 10.5 km diameter Bosumtwi impact crater is one of the youngest large impact structures on Earth. The crater rim is readily noticed on topographic maps or in satellite imagery. It defines a circular basin filled by water (Lake Bosumtwi) and lacustrine sediments. The morphology of this impact structure is also characterized by a circular plateau extending beyond the rim and up to 9–10 km from the center of the crater (about 2 crater radii). This feature comprises a shallow ring depression, also described as an annular moat, and a subdued circular ridge at its outer edge. The origin of this outermost feature could so far not be elucidated based on remote sensing data only. Our approach combines detailed topographic analysis, including roughness mapping, with airborne radiometric surveys (mapping near‐surface K, Th, U concentrations) and field observations. This provides evidence that the moat and outer ring are features inherited from the impact event and represent the partially eroded ejecta layer of the Bosumtwi impact structure. The characteristics of the outer ridge indicate that ejecta emplacement was not purely ballistic but requires ejecta fluidization and surface flow. The setting of Bosumtwi ejecta can therefore be considered as a terrestrial analog for rampart craters, which are common on Mars and Venus, and also found on icy bodies of the outer solar system (e.g., Ganymede, Europa, Dione, Tethys, and Charon). Future studies at Bosumtwi may therefore help to elucidate the mechanism of formation of rampart craters.  相似文献   

9.
Because of the ubiquity of subsurface microbial life on Earth, examination of the subsurface of Mars could provide an answer to the question of whether microorganisms exist or ever existed on that planet. Impact craters provide a natural mechanism for accessing the deep substrate of Mars and exploring its exobiological potential. Based on equations that relate impact crater diameters to excavation depth we estimate the observed crater diameters that are required to prospect to given depths in the martian subsurface and we relate these depths to observed microbiological phenomena in the terrestrial subsurface. Simple craters can be used to examine material to a depth of ∼270 m. Complex craters can be used to reach greater depths, with craters of diameters ≥300 km required to reach depths of 6 km or greater, which represent the limit of the terrestrial deep subsurface biosphere. Examination of the ejecta blankets of craters between 17.5 and 260 km in diameter would provide insights into whether there is an extant, or whether there is evidence of an extinct, deep subsurface microbiota between 500 and 5000 m prior to committing to large-scale drilling efforts. At depths <500 m some crater excavations are likely to be more important than others from an exobiological point of view. We discuss examples of impacts into putative intracrater paleolacustrine sediments and regions associated with hydrothermal activity. We compare these depths to the characteristics of subsurface life on Earth and the fossil microbiological record in terrestrial impact craters.  相似文献   

10.
The location, size, and principal characteristics of the currently known proven and probable terrestrial impact structures are tabulated. Of the 78 known probable structures, only 3 are Precambrian and the majority are <300 my in age. A survey of the variation in preservation with size and age indicates that, unless protected by sedimentary cover, a structure <20 km in diameter has a recognizable life of <600 my. The depth-diameter relationships of terrestrial structures are similar to lunar craters; however, it is believed that terrestrial craters were always shallower than their lunar counterparts. Complex structures formed in sedimentary targets are shallower than those in crystalline targets, and the transition from simple to complex crater morphology occurs in sedimentary strata at approximately one-half the diameter of the morphology transition in crystalline rocks. This is a reflection of target strength. Although observations indicate that crater size, target strength, and surface gravity are variables in the formation of complex craters, they do not permit an unequivocal choice between collapse and rebound processes for the formation of complex structures. It may be that both processes act together in the modification of crater morphology during the later stages of excavation. The major emphasis of recent shock metamorphic studies has been toward the development of models of cratering processes. An important contribution has been the identification, through meteoritic contamination in the melt rocks, of the type of bolide at a number of probable impact structures. This has served to strengthen the link between the occurrence of shock metamorphic effects and their origin by hypervelocity meteorite impact.  相似文献   

11.
Abstract— Environmental conditions on Mars are conducive to the modification and erosion of impact craters, potentially revealing the nature of their substructure. On Earth, postimpact erosion of complex craters in a wide range of target rocks has revealed the nature and distribution of craterrelated fault structures and a complex array of breccia and pseudotachylyte dikes, which range up to tens of meters in width and tens of kilometers in length. We review the characteristics of fault structures, breccia dikes, and pseudotachylyte dikes on Earth, showing that they occur in complex network‐like patterns and are often offset along late‐stage crater‐related faults. Individual faults and dikes can undulate in width and can branch and bifurcate along strike. Detailed geological analyses of terrestrial craters show that faults and breccia dikes form during each of the major stages of the impact‐cratering process (compression, excavation, and modification). We report here on the discovery of prominent, lattice‐like ridge networks occurring on the floor of a highly modified impact crater 75 km in diameter near the dichotomy boundary of the northern lowland and southern upland. Interior fill and crater‐floor units have been exhumed by fluvial and eolian processes to reveal a unit below the crater floor containing a distinctive set of linear ridges of broadly similar width and forming a lattice‐like pattern. Ridge exposures range from ?1–4 km in length and ?65–120 m in width, are broadly parallel, straight to slightly curving, and are cross‐cut by near‐orthogonal ridges, forming a box or lattice‐like pattern. Ridges are exposed on the exhumed crater floor, extending from the base of the wall toward the center. On the basis of the strong similarities of these features to terrestrial crater‐related fault structures and breccia dikes, we interpret these ridges to be faults and breccia dikes formed below the floor of the crater during the excavation and modification stages of the impact event, and subsequently exhumed by erosion. The recognition of such features on Mars will help in documenting the nature of impact‐cratering processes and aid in assessment of crustal structure. Faults and breccia dikes can also be used as data for the assessment of post‐cratering depths and degrees of landform exhumation.  相似文献   

12.
A catalog of crater dimensions that were compiled mostly from the new Apollo-based Lunar Topographic Orthophotomaps is presented in its entirety. Values of crater diameter, depth, rim height, flank width, circularity, and floor diameter (where applicable) are tabulated for a sample of 484 craters on the Moon and 22 craters on Earth. Systematic techniques of mensuration are detailed. The lunar craters range in size from 400 m to 300 km across and include primary impact craters of the main sequence, secondary impact craters, craterlets atop domes and cones, and dark-halo craters. The terrestrial craters are between 10 m and 22.5 km in diameter and were formed by meteorite impact.  相似文献   

13.
The Lonar impact crater, India, is one of the few known terrestrial impact craters excavated in continental basaltic target rocks (Deccan Traps, ~65 Ma). The impactites reported from the crater to date mainly include centimeter‐ to decimeter‐sized impact‐melt bombs, and aerodynamically shaped millimeter‐ and submillimeter‐sized impact spherules. They occur in situ within the ejecta around the crater rim and show schlieren structure. In contrast, non–in situ glassy objects, loosely strewn around the crater lake and in the ejecta around the crater rim do not show any schlieren structure. These non–in situ fragments appear to be similar to ancient bricks from the Daityasudan temple in the Lonar village. Synthesis of existing and new major and trace element data on the Lonar impact spherules show that (1) the target Lonar basalts incorporated into the spherules had undergone minimal preimpact alteration. Also, the paleosol layer as preserved between the top‐most target basalt flow and the ejecta blanket, even after the impact, was not a source component for the Lonar impactites, (2) the Archean basement below the Deccan traps were unlikely to have contributed material to the impactite parental melts, and (3) the impactor asteroid components (Cr, Co, Ni) were concentrated only within the submillimeter‐sized spherules. Two component mixing calculations using major oxides and Cr, Co, and Ni suggest that the Lonar impactor was a EH‐type chondrite with the submillimeter‐sized spherules containing ~6 wt% impactor components.  相似文献   

14.
The Flynn Creek impact structure is an approximately 3.8 km diameter, marine‐target impact structure, which is located in north central Tennessee, USA. The target stratigraphy consists of several hundreds of meters of Ordovician carbonate strata, specifically Knox Group through Catheys‐Leipers Formation. Like other, similarly sized marine‐target impact craters, Flynn Creek's crater moat‐filling deposits include, in stratigraphic order, gravity‐driven slump material, aqueous resurge deposits, and secular (postimpact) aqueous settling deposits. In the present study, we show that Flynn Creek also possesses previously undescribed erosional resurge gullies and an annular, sloping surface that comprises an outer crater rim surrounding an inner, nested bowl‐shaped crater, thus forming a concentric crater structure. Considering this morphology, the Flynn Creek impact structure has a crater shape that has been referred to at other craters as an “inverted sombrero.” In this paper, we describe the annular rim and the inner crater at Flynn Creek using geographic information system technology. We relate these geomorphic features to the marine environment of crater formation, and compare the Flynn Creek impact structure with other marine‐target impact structures having similar features.  相似文献   

15.
Comparing craters of identical diameter on a planet is an empirical method of studying the effects of different target and impactor properties while holding total impact energy nearly constant. We have analyzed the Martian crater population within a narrow diameter range (7 km < crater diameter < 9 km) at the simple‐complex crater transition using three approaches. We looked for correlations of morphology with surface geology using a global crater database and global geologic map. We examined selected regions in detail with high‐resolution images to further understand the relationship between crater morphology and bulk target properties. Finally, we examined craters in close proximity to each other in order to hold target properties constant, so that we could isolate impactor effects on crater morphology. We found a strong correlation between target properties and interior crater morphology, and we found little evidence that impactor properties (other than impact angle) affect crater appearance. Central uplift and wall slumping are enhanced for less consolidated targets. Layered targets affected both the excavation and modification stages of complex crater formation; the resulting craters have pseudoterraces, flat floors, and central pits.  相似文献   

16.
The investigation of terrestrial impact structures is crucial to gain an in‐depth understanding of impact cratering processes in the solar system. Here, we use the impact structure Jebel Waqf as Suwwan, Jordan, as a representative for crater formation into a layered sedimentary target with contrasting rheology. The complex crater is moderately eroded (300–420 m) with an apparent diameter of 6.1 km and an original rim fault diameter of 7 km. Based on extensive field work, IKONOS imagery, and geophysical surveying we present a novel geological map of the entire crater structure that provides the basis for structural analysis. Parametric scaling indicates that the structural uplift (250–350 m) and the depth of the ring syncline (<200 m) are anomalously low. The very shallow relief of the crater along with a NE vergence of the asymmetric central uplift and the enhanced deformations in the up‐range and down‐range sectors of the annular moat and crater rim suggest that the impact was most likely a very oblique one (~20°). One of the major consequences of the presence of the rheologically anisotropic target was that extensive strata buckling occurred during impact cratering both on the decameter as well as on the hundred‐meter scale. The crater rim is defined by a circumferential normal fault dipping mostly toward the crater. Footwall strata beneath the rim fault are bent‐up in the down‐range sector but appear unaffected in the up‐range sector. The hanging wall displays various synthetic and antithetic rotations in the down‐range sector but always shows antithetic block rotation in the up‐range sector. At greater depth reverse faulting or folding is indicated at the rim indicating that the rim fault was already formed during the excavation stage.  相似文献   

17.
Målingen is the 0.7 km wide minor crater associated to the 10 times larger Lockne crater in the unique Lockne–Målingen doublet. The craters formed at 458 Ma by the impact of a binary asteroid related to the well-known 470 Ma Main Belt breakup event responsible for a large number of Ordovician craters and fossil meteorites. The binary asteroid struck a target sequence including ~500 m of sea water, ~80 m of limestone, ~30 m of dark mud, and a peneplainized Precambrian crystalline basement. Although the Lockne crater has been extensively studied by core drillings and geophysics, little is known about the subsurface morphology of Målingen. We performed magnetic susceptibility and remanence, as well as density, measurements combined with gravity, and magnetic field surveys over the crater and its close vicinity as a base for forward magnetic and gravity modeling. The interior of the crater shows a general magnetic low of 90–100 nT broken by a clustered set of high-amplitude, short wavelength anomalies caused by bodies of mafic rock in the target below the crater and as allogenic blocks in the crater infill. The gravity shows a general −1.4 mgal anomaly over the crater caused by low-density breccia infill and fractured crystalline rocks below the crater floor. The modeling also revealed a slightly asymmetrical shape of the crater that together with the irregular ejecta distribution supports an oblique impact from the east, which is consistent with the direction of impact suggested for the Lockne crater.  相似文献   

18.
The Målingen structure is an approximately 700 m wide, rimmed, sediment‐filled, circular depression in Precambrian crystalline basement approximately 16.2 km from the concentric, marine‐target Lockne crater (inner, basement crater diameter approximately 7.5 km, total diameter in sedimentary strata approximately 13.5 km). We present here results from geologic mapping, a 148.8 m deep core drilling from the center of the structure, detailed biostratigraphic dating of the structure's formation and its age correlation with Lockne, chemostratigraphy of the sedimentary infill, and indication for shock metamorphism in quartz from breccias below the crater infill. The drill core reveals, from bottom to the top, approximately 33 m of basement rocks with increased fracturing upward, approximately 10 m of polymict crystalline breccia with shock features, approximately 97 m of slumped Cambrian mudstone, approximately 4.7 m of a normally graded, polymict sedimentary breccia that in its uppermost part grades into sandstone and siltstone (cf. resurge deposits), and approximately 1.6 m of secular sediments. The combined data set shows that the Målingen structure formed in conjunction with the Lockne crater in the same marine setting. The shape and depth of the basement crater and the cored sequence of crystalline breccias with shocked quartz, slumped sediments, and resurge deposits support an impact origin. The stratigraphic and geographic relationship with Lockne suggests the Lockne and Målingen craters to be the first described doublet impact structure by a binary asteroid into a marine‐target setting.  相似文献   

19.
We report on the microscopic impactor debris around Kamil crater (45 m in diameter, Egypt) collected during our 2010 geophysical expedition. The hypervelocity impact of Gebel Kamil (Ni‐rich ataxite) on a sandstone target produced a downrange ejecta curtain of microscopic impactor debris due SE–SW of the crater (extending ~300,000 m2, up to ~400 m from the crater), in agreement with previous determination of the impactor trajectory. The microscopic impactor debris include vesicular masses, spherules, and coatings of dark impact melt glass which is a mixture of impactor and target materials (Si‐, Fe‐, and Al‐rich glass), plus Fe‐Ni oxide spherules and mini shrapnel, documenting that these products can be found in craters as small as few tens of meters in diameter. The estimated mass of the microscopic impactor debris (<290 kg) derived from Ni concentrations in the soil is a small fraction of the total impactor mass (~10 t) in the form of macroscopic shrapnel. That Kamil crater was generated by a relatively small impactor is consistent with literature estimates of its pre‐atmospheric mass (>20 t, likely 50–60 t).  相似文献   

20.
Recently a number of studies have identified small lunar geologic structures to be <100 Ma in age using standard remote sensing techniques. Here we present new crater size frequency distributions (CSFDs) and model ages using craters D > 10 m for five small target units: one irregular mare patch (IMP) in Mare Nubium and four regions located on lunar wrinkle ridges in Mare Humorum. For comparison we also date another IMP found in a recent study in Mare Tranquillitatis (Braden et al. 2014 ). Absolute model age (AMA) derivation corresponds to 46 ± 5 Ma and 22 ± 1 Ma for Nubium and Sosigenes IMP, respectively. We show that for IMPs and in nearby control mare regions, similar production-like cumulative log–log SFD slopes of −3 are observed. In contrast, control mare regions in Mare Humorum exhibit shallower equilibrium slopes from −1.83 to −2. Three out of four wrinkle ridges appear to be in equilibrium but with crater lifetimes lower than on the corresponding maria. Low crater frequencies on one wrinkle ridge result in an age of 8.6 ± 1 Ma. This study region contains 80% fresh craters, which suggests that the crater population is still in production indicative of a recent resurfacing event.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号