Infrasonic seismic and acoustic measurements in the deep ocean

The authors compare the signal-to-noise ratios obtained on bottomed seismometers, bottomed hydrophones, and buried seismometers from near-surface explosions in the Ngendei Expedition. The data were recorded in 5.5-km-deep water in the south central Pacific Ocean with a triaxial borehole seismograph and four triaxial ocean-bottom seismographs having externally mounted hydrophones. At ranges less than 35 km, the data indicate that the ocean bottom seismometer is a superior signal detector than the ocean-bottom hydrophone, and that the subbottom seismometer is superior in performance to the ocean-bottom seismometer. Above 4 Hz, the seismometer appears to have a 10-dB signal-to-noise advantage over the hydrophone for surface explosions at ranges less than 30 km     

Simplified method of deep-tow seismic profiling

To improve resolution of seismic-reflection profiles in continental slope water depths of 900 to 1500 m, a single hydrophone was towed about 150 m off the bottom to receive reflected signals from a surface-towed sparker sound source. That deep-towed hydrophone data show that valleys which appear V-shaped in records from a surface-towed hydrophone are flat-bottomed, and that subbottom reflections from an erosional unconformity can be much better resolved. The data produced by this technique are very hepful when used in conjunction with records from conventional surface-towed seismic-profiling equipment.     

Measurement of the signal to noise ratio in seismic profiling

The measurement of the signal to noise ratio in continuous seismic profiling systems is carried out by means of a small general purpose digital computer equipped with an analog to digital converter. The computer is programmed to compute and compare the power spectrum of a sample of noise to the power spectrum of a sample of noise plus an echo. Power spectra of some twenty to fifty shots are averaged to yield reliable estimates of the signal to noise ratio as a function of frequency. The observed spectra agree well with spectra calculated from signals measured near to an air-gun. This measurement of signal to noise ratio as a function of frequency provides unambiguous information for the adjustment of the necessary band-pass filter thus improving the operation of a continuous seismic profiler.     

Long-period acoustic and seismic measurements and ocean floorcurrents

Pressure fluctuations caused by a strong ocean floor current are evident during most of an eighty-day-long record of very-low-frequency acoustic ambient noise measured by an instrument on the seafloor in the western Atlantic in the framework of the HEBBLE (High Energy Benthic Boundary Layer Experiment). The differential pressure gauges on the instrument produce useful measurements over a wide frequency band extending from 0.0005 to 16 Hz. The spectrum of current-induced pressure fluctuations is red with a power-law dependence on frequency with an exponent of -1.5. Turbulence in the ocean floor boundary layer is the source of these pressure fluctuations rather than the effects of flow around the transducers. This record of boundary-layer pressure fluctuations is used to predict the effect of seafloor currents on long-period seismograph measurements from the seafloor and from under the seafloor in boreholes     

Coherent seismic sea-bottom profiling based on broadband signals

Experimental results of the seismic profiling with bottom penetration up to 1000 m based on broadband signals and conducted in the Caspian Sea sites are presented. Use has been made of synchronized sequences of probing pulses with linear frequency modulation at a frequency deviation of 50 to100 Hz. The pulses were emitted by a towed sound source of an original design (acoustic power up to 300 W, frequency ranged from 100 to 1000 Hz) and received by a standard digital seismic streamer. The processing of the signals involved the matched filtering of the individual pulses and the trajectory accumulation of a long sequence of pulses lengthwise the horizontal-homogeneous reflecting layers of the bottom structure. The adaptive stacking procedure taking into account the linear inclinations of the individual layers allowed us to enlarge the stacking interval by up to 100 pulses and to increase the effective depth and the spatial resolution of the seismic profiling, which gave us a total increase of more than 30 dB in the S/N ratio. In our view, the seismic profiling using low-power (about 100 W) and broadband (up to several hundred Hz) coherent sound sources represents a promising technology for decreasing the hazardous impact on aquatic ecosystems. The approach developed is an alternative to the conventional technology of marine seismic prospecting based on powerful pulse sources of the shock type (air guns, sparkers) in the low frequency range (less than ～200 Hz).     

A simple deep-towed vertical array for high-resolution reflection seismic profiling

A simple, low cost, deep-towed system for high-resolution reflection seismic profiling is described. It consists of a vertical array with two hydrophones having a separation of 2.2 m and rigidly mounted onto streamlined tow bodies. Improvement of the signal-to-noise ratio is attained by simple stacking of the hydrophone outputs after signal conditioning and travel time corrections. The suppression of side echoes and surface reflections is achieved by an analog procedure which in effect improves the directional characteristics of the array. A circuit for automatic gain control is included to enhance weak signals as well as to suppress ringing.Results in Kiel Bay and over the crest of the Jan Mayen Ridge (northern Atlantic) suggest that this simple vertical array may supplement air gun systems better than conventional, surface pinger-type equipment.Institute of Geophysics     

Magnetic zoning and seismic structure of the South China Sea ocean basin

We made a systematic investigation on major structures and tectonic units in the South China Sea basin based on a large magnetic and seismic data set. For enhanced magnetic data interpretation, we carried out various data reduction procedures, including upward continuation, reduction to the pole, 3D analytic signal and power spectrum analyses, and magnetic depth estimation. Magnetic data suggest that the South China Sea basin can be divided into five magnetic zones, each with a unique magnetic pattern. Zone A corresponds roughly to the area between Taiwan Island and a relict transform fault, zone B is roughly a circular feature between the relict transform fault and the northwest sub-basin, and zones C, D, and E are the northwest sub-basin, the east sub-basin, and the southwest sub-basin, respectively. This complexity in basement magnetization suggests that the South China Sea evolved from multiple stages of opening under different tectonic settings. Magnetic reduction also fosters improved interpretation on continental margin structures, such as Mesozoic and Cenozoic sedimentary basins and the offshore south China magnetic anomaly. We also present, for the first time, interpretations of three new 2D reflection seismic traverses, which are of ~2,000 km in total length and across all five magnetic zones. Integration of magnetic and seismic data enables us to gain a better 3D mapping on the basin structures. It is shown that the transition from the southwest sub-basin to the east sub-basin is characterized by a major ridge formed probably along a pre-existing fracture zone, and by a group of primarily west-dipping faults forming an exact magnetic boundary between zones D and E. The northwest sub-basin has the deepest basement among the three main sub-basins (i.e., the northwest sub-basin, the southwest sub-basin, and the east sub-basin). Our seismic data also reveal a strongly faulted continent–ocean transition zone of about 100 km wide, which may become wider and dominated with magmatism or transit to an oceanic crust further to the northeast.     

Direct measurements of surface and mid-depth circulationin the Shikoku Basin by Argo profiling floats

The circulation in the Shikoku Basin plays a very important role in the pathway of the Kuroshio and the water exchange in the subtropical gyre in the North Pacific Ocean. The Argo profiling floats deployed in the Shikoku Basin are used to study the circulations and water masses in the basin. The trajectories and parking depth velocity fields derived from all Argo floats show an anticyclonic circulation at 2 000 m in the Shikoku Basin. There are inhanced eddy activities in the Shikoku Basin, which have large influence on the Shikoku Basin circulation patterns. The characteristics of temperature-salinity curves indicate that there are North Pacific Ocean tropical water (NPTW), North Pacific Ocean subtropical mode water (NPSTMW) and North Pacific Ocean intermediate water (NPIW) in the Shikoku Basin. The NPTW is only exists south of 32°N. In the middle part of the basin, which is 28°~31°N,133°~135°E, there is a confluence region. Water masses coming from the Kuroshio mix with the water in the Shikoku Basin.     

A high-resolution seismic profiling system using a deep-towed horizontal hydrophone streamer

A seismic reflection profiling system utilising a surface air gun source and a deep-towed horizontal hydrophone streamer has been developed for high resolution studies in the deep ocean. The instrument is deployed on a conventional armoured single conductor cable at depths of up to 6 km. Seismic data from the 30 m long streamer is wide-band frequency modulated up the towing cable to the ship together with a high frequency monitor from a 3.5 kHz echo-sounder mounted on the instrument package. The geometry of the system allows an order of magnitude improvement in spatial resolution compared with that obtained from standard surface source/receiver configurations. The summed hydrophones of the streamer attenuate cable-generated mechanical noise, and the 3.5 kHz sea-surface and bottom reflected returns provide receiver positioning information. The system has been successfully deployed at depths of 5 km in the Vema Fracture Zone in the North Atlantic, and although initially difficulties were experienced in balancing the streamer, subsequent profiles across the transform fault show details of sub-bottom structure which on conventional surface records are generally masked by diffraction hyperbolae.     

Uncovering governance mechanisms surrounding harbour porpoise conservation in the Danish Skagerrak Sea

The harbour porpoise (Phocoena phocoena) is the focus of a range of conservation efforts and policies, including the Habitats Directive, aimed at reducing the bycatch of non-target species in gillnet fisheries. This paper describes the governance process and analyses the governance mechanisms and conflicts surrounding ongoing fisheries management planning with a focus on two Natura 2000 sites in the Danish part of the Skagerrak Sea designated to protect harbour porpoises. Responsibility for developing fisheries management for Natura 2000 sites is solely the remit of the fisheries agency, including mechanisms related to stakeholder involvement. This approach fuels the efficiency of the decision making process, while full transparency and/or co-decision becomes less of a given within a ministry for an economic sector compared with the environment ministry. In relation to porpoises, conflicts are driven mainly by the economy and the varying perceptions of the bycatch issue, with great differences between government, NGO's and fishers. Interviews with fishers and fishing effort data reveal intra-sectoral conflicts pertaining to the incompatibility of active trawling and passive gillnetting in the areas. The paper questions the overall approach to managing the harbour porpoise bycatch issue in light of Natura 2000 and discusses the role of science and its high level of influence in this planning process.     

Tectonic shortening and gravitational spreading in the Gulf of Cadiz accretionary wedge: Observations from multi-beam bathymetry and seismic profiling

The Gulf of Cadiz lies astride the complex plate boundary between Africa and Eurasia west of the Betic-Rif mountain belt. We report on the results of recent bathymetric swathmapping and multi-channel seismic surveys carried out here. The seafloor is marked by contrasting morphological provinces, spanning the SW Iberian and NW Moroccan continental margins, abyssal plains and an elongate, arcuate, accretionary wedge. A wide variety of tectonic and gravitational processes appear to have shaped these structures. Active compressional deformation of the wedge is suggested by folding and thrusting of the frontal sedimentary layers as well as basal duplexing in deeper internal units. There is evidence for simultaneous gravitational spreading occurring upslope. The very shallow mean surface and basal slopes of the accretionary wedge (1° each) indicate a very weak decollement layer, geometrically similar to the Mediterranean Ridge accretionary complex. Locally steep slopes (up to 10°) indicate strongly focused, active deformation and potential gravitational instabilities. The unusual surface morphology of the upper accretionary wedge includes “raft-tectonics” type fissures and abundant sub-circular depressions. Dissolution and/or diapiric processes are proposed to be involved in the formation of these depressions.     

Late glacial fans in the eastern Skagerrak; depositional environment interpreted from swath bathymetry and seismostratigraphy

The origin of acoustically transparent fan deposits overlying glacial till and ice-proximal sediments on the southern margin of the Norwegian Channel has been studied using high-resolution seismic-reflection profiles and multibeam bathymetry. The first deposits overlying glacigenic sediments are a series of stacked, acoustically transparent submarine fans. The lack of glaciomarine sediments below and between individual fans indicates that deposition was rapid and immediately followed the break up of the Late Weichselian ice cover. The fans are overlain by stratified glaciomarine sediments and Holocene mud. Because of the uniformity of this drape, the upper surface of the fan deposits is mimicked at the present seafloor, and the bathymetric images clearly show the spatial relationship of the fans to bedrock ridges and the presence of braided channel-levee systems on the surface of the youngest fans. The acoustically transparent character of the fan deposits indicates that they comprise silt and clay, and their lobate form and lack of internal stratification indicates that they were deposited by debris flows. The channel-levee morphology indicates deposition from more watery hyperconcentrated fluid flows. The fan sediments were either derived from 1) erosion of Mid Weichselian lake deposits in southern Skagerrak or 2) from Late glacial ice-margin lake deposits, ponded against the Norwegian Channel ice stream, which collapsed catastrophically when the lateral support was removed as the ice disintegrated. Fans composed almost exclusively of fine-grained sediment need not, therefore, rule out an origin in a deglacial setting relatively close to the former margins of glaciers and ice sheets.     

Mapping of volcanic apron and the upper crust between Gran Canaria and Tenerife (Canary Islands) with seismic reflection profiling

During the Volcanic Island Clastic Apron Project (VICAP), south of the Canary Islands, a total of 700 line-km multichannel seismic profiles were acquired. Two prominent reflectors (A and C) were observed alternately: A is the top of the volcanic apron. C, at a depth of about 5.8 s (two way traveltime twt), can be correlated to reflector R7, a marker dated mid-Miocene (16 Ma) at the DSDP site 397. The deepest reflection (E) in the basin was observed at 8 s (twt), which is an atypical oceanic basement.