Tectonic controls on base-level variations and depositional sequences within thrust-top and foredeep basins: examples from the Neogene thrust belt of central Sicily

Tectonic subsidence and uplift may be recorded by concomitant sedimentation, not only from decompacted accumulation curves but also from the evolving depositional environment relative to sea level at the time. In thrust belts there are two types of processes capable of generating vertical movements, each with different wavelengths and amplitudes. Regional subsidence is driven by flexural loading by the orogenic hinterland, the thrust belt and accumulated sediments of the underlying foreland lithosphere. Within this flexure, the foreland thrust belt will generate areas of local uplift, notably at the crests of thrust anticlines. In this contribution we examine how these processes have interacted to influence relative sea level as recorded by late Neogene sediments in an array of basins developed above and adjacent to the Maghrebian thrust belt of central Sicily. Two particular periods are addressed, the late Tortonian to early Messinian (Terravecchia Formation) and early to early late Pliocene. The earlier of these is characterized by a deltaic complex that formed prograding depositional geometries, migrating into perched basins. Collectively, however, these units are transgressive and migrate back towards the orogen. A depositional model is presented that links the migration of facies belts to subsidence caused by accentuated tectonic loading in the hinterland and break-back thrust sequences across the basins. We infer that a palaeobathymetric profile of underfilled sub-basins resulted and that this influenced the pattern of evaporite accumulation during Mediterranean desiccation in Messinian times. The Pliocene sediments, accumulated under renewed global sea levels, prograded towards the foreland. A waning tectonic load in the hinterland driving isostatic rebound, uplift and coastal offlap is the proposed explanation. This contribution is a case history for the depositional evolution of dominantly submarine thrust systems and their record of relative sea-level changes.     

Tectonic and sedimentological evolution of the Pliocene–Quaternary basins of Zakynthos island, Greece: case study of the transition from compressional to extensional tectonics

Pliocene–Quaternary basins of the Ionian islands evolved in a complex tectonic setting that evolved from a mid to late Cenozoic compressional zone of the northern external Hellenides to the rapidly extending Pliocene–Quaternary basins of the Peloponnese. The northern limit of the Hellenic Trench marks the junction of these two tectonic regimes. A foreland-propagating fold and thrust system in the northern external Hellenides segmented the former Miocene continental margin basin in Zakynthos and permitted diapiric intrusion of Triassic gypsum along thrust ramps. Further inboard, coeval extensional basins developed, with increasing rates of subsidence from the Pliocene to Quaternary, resulting in four principal types of sedimentation: (1) condensed shelf-sedimentation on the flanks of rising anticlines; (2) coarse-grained sedimentation in restricted basins adjacent to evaporitic diapirs rising along thrust ramps; (3) larger basins between fold zones were filled by extrabasinal, prodeltaic mud and sand from the proto-Acheloos river; (4) margins of subsiding Quaternary basins were supplied at sea-level highstands by distal deltaic muds and at lowstands by locally derived coarse clastic sediment.     

Anomalous passive subsidence of deep‐water sedimentary basins: a prearc basin example,southern New Caledonia Trough and Taranaki Basin,New Zealand

Stratigraphic data from petroleum wells and seismic reflection analysis reveal two distinct episodes of subsidence in the southern New Caledonia Trough and deep‐water Taranaki Basin. Tectonic subsidence of ~2.5 km was related to Cretaceous rift faulting and post‐rift thermal subsidence, and ~1.5 km of anomalous passive tectonic subsidence occurred during Cenozoic time. Pure‐shear stretching by factors of up to 2 is estimated for the first phase of subsidence from the exponential decay of post‐rift subsidence. The second subsidence event occured ~40 Ma after rifting ceased, and was not associated with faulting in the upper crust. Eocene subsidence patterns indicate northward tilting of the basin, followed by rapid regional subsidence during the Oligocene and Early Miocene. The resulting basin is 300–500 km wide and over 2000 km long, includes part of Taranaki Basin, and is not easily explained by any classic model of lithosphere deformation or cooling. The spatial scale of the basin, paucity of Cenozoic crustal faulting, and magnitudes of subsidence suggest a regional process that acted from below, probably originating within the upper mantle. This process was likely associated with inception of nearby Australia‐Pacific plate convergence, which ultimately formed the Tonga‐Kermadec subduction zone. Our study demonstrates that shallow‐water environments persisted for longer and their associated sedimentary sequences are hence thicker than would be predicted by any rift basin model that produces such large values of subsidence and an equivalent water depth. We suggest that convective processes within the upper mantle can influence the sedimentary facies distribution and thermal architecture of deep‐water basins, and that not all deep‐water basins are simply the evolved products of the same processes that produce shallow‐water sedimentary basins. This may be particularly true during the inception of subduction zones, and we suggest the term ‘prearc’ basin to describe this tectonic setting.     

Geomorphological study of long-term erosion on a tropical volcanic ocean island: Tahiti-Nui (French Polynesia)

A quantitative geomorphological study has been made on 27 river basins in Tahiti-Nui volcanic island (French Polynesia) to reconstruct the erosional evolution of a young oceanic island subjected to heavy tropical rainfall. Tahiti-Nui is composed of a main shield volcano cut by two huge landslides on each side of a main E–W rift zone. The northern landslide depression was rapidly buried by the construction of a second shield, the late activity of which overflowed the crest and then filled the southern landslide depression. The island is now volcanically inactive and is deeply dissected by erosion. The present geometries of the river basins are first compared using dimensionless parameters derived from a digital elevation model. The original volcanic surfaces are then reconstructed to estimate the volumes removed by erosion and determine the average rates of long-term erosion. The basins developed on the flanks of the main shield are wider, shallower, and gentler than the basins incising the post-landslide second shield, indicating a higher degree of evolution. Rainfall concentration on the windward (eastern) side of the island also contributed to increase the vertical lowering of the volcanic relief and the enlargement of the valleys. The magnitude of erosion, however, is neither directly linked with the age of the units incised nor with the differential amounts of rainfall. Erosion rates determined over the last 1 Myr range between 10^− 3 km³ kyr^− 1 and 0.25 km³ kyr^− 1. The highest values occur in the basins incising the main E–W rift zone and/or the lateral rims of the northern and southern landslide depressions. Long-term dissection has thus been enhanced along the geological discontinuities of the eruptive system. Deep erosion was first constrained along the axis of the main E–W rift zone, where numerous dykes compartmentalize the volcanic structure into large unstable blocks. Dykes most probably acted as mechanical discontinuities along which shallow gravitational landslides recurrently occurred. Such mass-wasting episodes produced significant amounts of debris, partly preserved as highly indurated sedimentary breccias of various ages exposed at various locations. Subsequent dissection of Tahiti-Nui was enhanced to the north and to the south, leading to the rapid evolution of the Papenoo and Taharuu drainage systems over the last 500 kyr. Long-term dissection on Tahiti-Nui has been responsible for the removal of at least 350 km³ of volcanic material from the surface, and for the partial exhumation of a shallow intrusive complex partly composed of coarse-grained plutonic rocks (gabbros and syenites) in the central part of the eruptive system. Structurally controlled erosion is thus a key component of landscape evolution on such high-relief oceanic tropical islands.     

Rapid outer marginal collapse at the rift to drift transition of passive margin evolution,with a Gulf of Mexico case study

Interpretation of long‐offset 2D depth‐imaged seismic data suggests that outer continental margins collapse and tilt basinward rapidly as rifting yields to seafloor spreading and thermal subsidence of the margin. This collapse post‐dates rifting and stretching of the crust, but occurs roughly ten times faster than thermal subsidence of young oceanic crust, and thus is tectonic and pre‐dates the ‘drift stage’. We term this middle stage of margin development ‘outer margin collapse’, and it accords with the exhumation stage of other authors. Outer continental margins, already thinned by rifting processes, become hanging walls of crustal‐scale half grabens associated with landward‐dipping shear zones and zones of low‐shear strength magma at the base of the thinned crust. The footwalls of the shear zones comprise serpentinized sub‐continental mantle that commonly becomes exhumed from beneath the embrittled continental margin. At magma‐poor margins, outer continental margins collapse and tilt basinward to depths of about 3 km subsea at the continent–ocean transition, often deeper than the adjacent oceanic crust (accreted later between 2 and 3 km). We use the term ‘collapse’ because of the apparent rapidity of deepening (<3 Myr). Rapid salt deposition, clastic sedimentation (deltaic), or magmatism (magmatic margins) may accompany collapse, with salt thicknesses reaching 5 km and volcanic piles 1525 km. This mechanism of rapid salt deposition allows mega‐salt basins to be deposited on end‐rift unconformities at global sea level, as opposed to deep, air‐filled sub‐sea depressions. Outer marginal collapse is ‘post‐rift’ from the perspective of faulting in the continental crust, but of tectonic, not of thermal, origin. Although this appears to be a global process, the Gulf of Mexico is an excellent example because regional stratigraphic and structural relations indicate that the pre‐salt rift basin was filled to sea level by syn‐rift strata, which helps to calibrate the rate and magnitude of collapse. We examine the role of outer marginal detachments in the formation of East India, southern Brazil and the Gulf of Mexico, and how outer marginal collapse can migrate diachronously along strike, much like the onset of seafloor spreading. We suggest that backstripping estimates of lithospheric thinning (beta factor) at outer continental margins may be excessive because they probably attribute marginal collapse to thermal subsidence.     

Models of the rapid post‐rift subsidence in the eastern Qiongdongnan Basin,South China Sea: implications for the development of the deep thermal anomaly

The Qiongdongnan Basin is one of the largest Cenozoic rifted basins on the northern passive margin of the South China Sea. It is well known that since the Late Miocene, approximately 10 Ma after the end of the syn‐rift phase, this basin has exhibited rapid thermal subsidence. However, detailed analysis reveals a two‐stage anomalous subsidence feature of the syn‐rift subsidence deficit and the well‐known rapid post‐rift subsidence after 10.5 Ma. Heat‐flow data show that heat flow in the central depression zone is 70–105 mW m^?2, considerably higher than the heat flow (<70 mW m^?2) on the northern shelf. In particular, there is a NE‐trending high heat‐flow zone of >85 mW m^?2 in the eastern basin. We used a numerical model of coupled geothermal processes, lithosphere thinning and depositional processes to analyse the origin of the anomalous subsidence pattern. Numerical analysis of different cases shows that the stretching factor β_s based on syn‐rift sequences is less than the observed crustal stretching factor β_c, and if the lithosphere is thinned with β_c during the syn‐rift phase (before 21 Ma), the present basement depth can be predicted fairly accurately. Further analysis does not support crustal thinning after 21 Ma, which indicates that the syn‐rift subsidence is in deficit compared with the predicted subsidence with the crustal stretching factor β_c. The observed high heat flow in the central depression zone is caused by the heating of magmatic injection equivalently at approximately 3–5 Ma, which affected the eastern basin more than the western basin, and the Neogene magmatism might be fed by the deep thermal anomaly. Our results suggest that the causes of the syn‐rift subsidence deficit and rapid post‐rift subsidence might be related. The syn‐rift subsidence deficit might be caused by the dynamic support of the influx of warmer asthenosphere material and a small‐scale thermal upwelling beneath the study area, which might have been persisting for about 10 Ma during the early post‐rift phase, and the post‐rift rapid subsidence might be the result of losing the dynamic support with the decaying or moving away of the deep thermal source, and the rapid cooling of the asthenosphere. We concluded that the excess post‐rift subsidence occurs to compensate for the syn‐rift subsidence deficit, and the deep thermal anomaly might have affected the eastern Qiongdongnan Basin since the Late Oligocene.     

The interior rifts of the Yemen - analysis of basin structure and stratigraphy in a regional plate tectonic context

The full extent of Mesozoic rift basins within interior Yemen has only recently been established. This work presents a detailed documentation of the stratigraph)., structure and basin development of the Marib-Shabwa and Sirr-Sayun basins, and the Jeza Trough. Yemen is located at the south-western margin of the Arabian Plate, which for most of its early geological history formed part of the northern passive margin of Gondwanaland. Mesozoic break up of the super-continent was associated with major rifting in the Late Jurassic (main phase) and Early Cretaceous. Orientation of the rift basins reflects an inheritance from deep-seated Precambrian structural trends which cross the Arabian Plate. The resultant structure of basement highs, tilted fault blocks, marginal terraces and central graben highs is illustrated in a series of detailed cross-sections. A comprehensive stratigraphic framework has also been established for the Jurassic and Cretaceous basin-fill, enabling thickness and facies variations to be analysed. This reveals a clear shift in the main period of fault-related, high sediment accumulation rates, both within and across the three interior basins of Yemen. In the western Marib-Shabwa Basin, the fill is dominantly Late Jurassic, whilst the eastern Shabwa Basin and Sirr-Sayun Basin exhibit a progressively increased, and younger, Early Cretaceous fill. The main period of fault-related sedimentation in the most easterly basin, the Jeza Trough, is wholly Cretaceous. Plate tectonic reconstructions of the area for this period have documented the separation and subsequent north-eastward movement of the Indian Plate, away- from Africa-Arabia. We believe this may have been the causal mechanism in the progressive eastward migration of rift activity in the Yemen.     

Flood Hazard on the Rivers of the Baikal Region

A comprehensive characterization of the flood hazard on the rivers of the Baikal region is presented, which was obtained by investigating the streams within the basins of the Angara, Upper Lena (with the Vitim and Olekma), Lower Tunguska (headwaters), Upper Amur and Lake Baikal (including the entire Selenga basin). The main flood indicators for the period 1985–2017 are estimated: the genesis, recurrence, duration, flooded area and the force of impact. The influence of changes in the river runoff characteristics on the flood risk is shown by results of correlation analysis and analysis of integro-differential curves. An assessment is made of the changes in the flood frequency at gauging stations during the period of pronounced climatic changes (from 1981 to 2014), compared with the earlier period. The flood hazard within the spatial context for municipalities in the rank of administrative districts is determined on the basis of the dual (socio-economic and natural) nature of floods. It has been confirmed that the most dangerous in the Baikal region are rainfall floods in the southern areas of Irkutsk oblast, the Republic of Buryatia and Zabaikalskii krai. They have the highest frequency, and the largest flooding areas and force of impact and are characterized by the greatest damage and by the largest number of victims and evacuated people. At the same time, the frequency of floods at gauging stations in recent years has decreased compared to the earlier period against the background of the observed low-water period, which is most pronounced on the rivers of South Baikal and in the Selenga river basin.     

Development of sedimentary basins: differential stretching,phase transitions,shear heating and tectonic pressure

Classical models of lithosphere thinning predict deep synrift basins covered by wider and thinner post‐rift deposits. However, synextensional uplift and/or erosion of the crust are widely documented in nature (e.g. the Base Cretaceous unconformity of the NE Atlantic), and generally the post‐rift deposits dominate basins fills. Accordingly, several basin models focus on this discrepancy between observations and the classical approach. These models either involve differential thinning, where the mantle thins more than the crust thereby increasing average temperature of the lithosphere, or focus on the effect of metamorphic reactions, showing that such reactions decrease the density of lithospheric rocks. Both approaches result in less synrift subsidence and increased post‐rift subsidence. The synextensional uplift in these two approaches happens only for special cases, that is for a case of initially thin crust, specific mineral assemblage of the lithospheric mantle or extensive differential thinning of the lithosphere. Here, we analyse the effects of shear heating and tectonic underpressure on the evolution of sedimentary basins. In simple 1D models, we test the implications of various mechanisms in regard to uplift, subsidence, density variations and thermal history. Our numerical experiments show that tectonic underpressure during lithospheric thinning combined with pressure‐dependent density is a widely applicable mechanism for synextensional uplift. Mineral phase transitions in the subcrustal lithosphere amplify the effect of underpressure and may result in more than 1 km of synextensional erosion. Additional heat from shear heating, especially combined with mineral phase transitions and differential thinning of the lithosphere, greatly decreases the amount of synrift deposits.     

Origin of the salt valleys in the Canyonlands section of the Colorado Plateau: Evaporite-dissolution collapse versus tectonic subsidence

The salt valleys over the axis of the salt-cored anticlines in the Paradox fold and fault belt (Canyonlands, Utah and Colorado) are created by subsidence of the anticline crests. Traditionally, the collapse of the anticlinal crests was attributed to dissolution of the salt walls (diapirs) forming the anticline cores. Recent studies based on scaled physical models and field observations propose that the salt valleys are a result of regional extension and that salt dissolution had only a minor influence in the development of the axial depressions. This paper presents several arguments and lines of evidence that refute the tectonic model and support the salt dissolution subsidence interpretation.The development of contractional structures in salt dissolution experiments led the advocates of the tectonic interpretation to reject the dissolution-induced subsidence explanation. However, these salt dissolution models do not reproduce the karstification of salt walls in a realistic way, since their analog involves removal of salt from the base of the diapirs during the experiments. Additionally, numerous field examples and laboratory models conducted by other authors indicate that brittle subsidence in karst settings is commonly controlled by subvertical gravity faults.Field evidence against the regional extension model includes (1) a thick cap rock at the top of the salt walls, (2) the concentration of subsidence deformation structures along the crest of the anticlines (salt walls), (3) deformational structures not consistent with the proposed NNE extension, like crestal synforms and NE–SW grabens, (4) dissolution-induced subsidence structures controlled by ring faulting, revealing deep-seated dissolution, (5) large blocks foundered several hundred meters into the salt wall, (6) evidence of recent and active dissolution subsidence, and (7) the aseismic nature of the recently active collapse faults. Although underground salt dissolution seems to be the main cause for the generation of the salt valleys, this phenomenon may have been favored by regional extension tectonics that enhance the circulation of groundwater and salt dissolution.     

Tectonic control of the Tejo river fluvial incision during the late Cenozoic, in Ródão—central Portugal (Atlantic Iberian border)

Staircases of strath terraces and strongly incised valleys are the most typical landscape features of Portuguese rivers. This paper examines the incision achieved during the late Cenozoic in an area crossed by the Tejo river between the border with Spain and the small town of Gavião. In the more upstream reach of this area, the Tejo crosses the Ródão tectonic depression, where four levels of terraces are distinguished. During the late Cenozoic fluvial incision stage, the Ródão depression underwent less uplift than the adjacent areas along the river. This is reflected by the greater thicknesses and spatial extent of the terraces; terrace genesis was promoted by impoundment of alluvium behind a quartzitic ridge and the local presence of a soft substratum. Outside this tectonic depression, the Tejo has a narrow valley incised in the Hercynian basement, with some straight reaches that probably correspond to NE–SW and NNW–SSE faults, the terraces being nearly absent. Geomorphological evidence of tectonic displacements affecting the Ródão dissected terrace remnants is described. Geochronological dating of the two younger and lower terrace levels of this depression suggests a time-averaged incision rate for the Tejo in the Ródão area, of ca. 1.0 m/ka over the last 60 thousand years. A clear discrepancy exists between this rate and the 0.1 m/ka estimated for the longer period since the end of the Pliocene. Although episodes of valley incision may be conditioned by climate and base-level changes, they may also have been controlled by local factors such as movement of small fault-bounded blocks, lithology and structure. Regional crustal uplift is considered to be the main control of the episodes of valley incision identified for this large, long-lived river. A model is proposed in which successive regional uplift events—tectonic phases—essentially determined the long periods of rapid river downcutting that were punctuated by short periods of lateral erosion and later by some aggradation, producing strath terraces.     

Tectonic evolution of sedimentary basins of northern Somalia

Regional seismic reflection profiles tied to lithological and biostratigraphic data from deep exploration wells have been used to determine the structure and evolution of the poorly known basins of northern Somalia. We recognize six major tectonostratigraphic sequences in the seismic profiles: Middle‐Late Jurassic syn‐rift sequences (Adigrat and Bihen Group), ?Cenomanian‐Campanian syn‐rift sequences (Gumburo Group), Campanian‐Maastrichtian syn‐rift sequences (Jesomma Sandstones), Palaeocene post‐rift sequences (Auradu Limestones), Early‐Middle Eocene post‐rift sequences (Taleh Formation) and Oligocene‐Miocene (Daban Group) syn‐rift sequences. Backstripping of well data provides new constraints on the age of rifting, the amount of crustal and mantle extension, and the development of the northern Somalia rifted basins. The tectonic subsidence and uplift history at the wells can be explained by a uniform extension model with three episodes of rifting punctuated by periods of relative tectonic quiescence and thermal subsidence. The first event initiated in the Late Jurassic (~156 Ma) and lasted for ~10 Myr and had a NW‐SE trend. We interpret the rift as a late stage event associated with the break‐up of Gondwana and the separation of Africa and Madagascar. The second event initiated in the Late Cretaceous (~80 Ma) and lasted for ~20–40 Myr. This event probably correlates with a rapid increase in spreading rate on the ridges separating the African and Indian and African and Antarctica plates and a contemporaneous slowing down of Africa's plate motion. The backstripped tectonic subsidence data can be explained by a multi‐rift extensional model with stretching factor, β, of 1.09–1.14 and 1.05–1.28 for the first and second rifting events, respectively. The model, fails, however, to completely explain the slow subsidence and uplift history of the margin during Early Cretaceous to Late Cretaceous. We attribute this slow subsidence to the combined effect of a sea‐level fall and regional uplift, which caused a major unconformity in northern Somalia. The third and most recent event occurred in the Oligocene (~32 Ma) and lasted for ~10 Myr. This rift developed along the Gulf of Aden and reactivated the Guban, Nogal and Daroor basins, and is related to the opening of the Gulf of Aden. As a result of these events the crust and upper mantle were thinned by up to a factor of two in some basins. In addition, several distinct petroleum systems developed. The principal exploration play is for Mesozoic petroleum systems with the syn‐rift Oligocene‐Miocene as a subordinate objective owing to low maturity and seal problems. The main seals for the different plays are various shales, some of which are also source rocks, but the Early Eocene evaporites of the Taleh formations can also perform a sealing role for Palaeogene or older generated hydrocarbons migrating vertically.     

Pro- vs. retro-foreland basins

Alpine‐type mountain belts formed by continental collision are characterised by a strong cross‐sectional asymmetry driven by the dominant underthrusting of one plate beneath the other. Such mountain belts are flanked on either side by two peripheral foreland basins, one over the underthrust plate and one over the over‐riding plate; these have been termed pro‐ and retro‐foreland basins, respectively. Numerical modelling that incorporates suitable tectonic boundary conditions, and models orogenesis from growth to a steady‐state form (i.e. where accretionary influx equals erosional outflux), predicts contrasting basin development to these two end‐member basin types. Pro‐foreland basins are characterised by: (1) Accelerating tectonic subsidence driven primarily by the translation of the basin fill towards the mountain belt at the convergence rate. (2) Stratigraphic onlap onto the cratonic margin at a rate at least equal to the plate convergence rate. (3) A basin infill that records the most recent development of the mountain belt with a preserved interval determined by the width of the basin divided by the convergence rate. In contrast, retro‐foreland basins are relatively stable, are not translated into the mountain belt once steady‐state is achieved, and are consequently characterised by: (1) A constant tectonic subsidence rate during growth of the thrust wedge, with zero tectonic subsidence during the steady‐state phase (i.e. ongoing accretion‐erosion, but constant load). (2) Relatively little stratigraphic onlap driven only by the growth of the retro‐wedge. (3) A basin fill that records the entire growth phase of the mountain belt, but only a condensed representation of steady‐state conditions. Examples of pro‐foreland basins include the Appalachian foredeep, the west Taiwan foreland basin, the North Alpine Foreland Basin and the Ebro Basin (southern Pyrenees). Examples of retro‐foreland basins include the South Westland Basin (Southern Alps, New Zealand), the Aquitaine Basin (northern Pyrenees), and the Po Basin (southern European Alps). We discuss how this new insight into the variability of collisional foreland basins can be used to better interpret mountain belt evolution and the hydrocarbon potential of these basins types.     

Effects of tectonics and lithology on long profiles of 16 rivers of the southern Central Massif border between the Aude and the Orb (France)

The analysis of longitudinal profiles of river channels and terraces in the southern Central Massif border, between the Aude and the Orb, allows the detection of anomalies caused by lithology and/or tectonic distortions. The rivers which have abnormally high slope and non-lithological knickzones indicate the main uplifted zones: the Montagne Noire and the Saint-Chinian ridge. A geomorphological and sedimentological analysis of detrital deposits was carried out as a basis for correlating the different formations, reconstructing the palaeodrainage and finding the main uplift and fluvial incision stages. During the Miocene, uplift remains limited as it is shown by the correlative fine deposits in the Languedocian piedmont. The Messinian incision (5.7–5.3 Ma) does not cross the Saint-Chinian ridge. On the other hand, fluvial incision becomes widespread in the Montagne Noire during the Upper Pliocene (3.4–2 Ma) when coarse deposits overlie either the Pliocene clay in the Orb palaeovalley or the Messinian conglomerates at the Cesse outlet. An Upper Pliocene uplift of the Montagne Noire and of the Saint-Chinian ridge is the cause of this incision and also of the diversion of the Cesse towards the Aude. Where the uplift rate was higher than incision rate, knickzones have developed like in the Avant-Monts south-side. The knickzones of lithological origin maintain a strong vertical stability during all the river incision stages. On the other hand, those of tectonic origin or base level lowering record upstream migration and their rate of retreat is controlled by the river discharge. As incision occurs only during the cold/temperate transition periods during the Quaternary, upward erosion slowly migrates (15 km since the Upper Pliocene, on the Orb) and so does not reach the riverheads.     

Three-dimensional forward stratigraphic modelling of the sedimentary architecture of meandering-river successions in evolving half-graben rift basins

The spatial organisation of meandering-river deposits varies greatly within the sedimentary fills of rift basins, depending on how differential rates of fault propagation and subsidence interplay with autogenic processes to drive changes in fluvial channel-belt position and rate of migration, avulsion frequency and mechanisms of meander-bend cut off. This set of processes fundamentally influences stacking patterns of the accumulated successions. Quantitative predictions of the spatio-temporal evolution and internal architecture of meandering fluvial deposits in such tectonically active settings remain limited. A numerical forward stratigraphic model—the Point-Bar Sedimentary Architecture Numerical Deduction (PB-SAND)—is applied to examine relationships between differential rates of subsidence and resultant fluvial channel-belt migration, reach avulsion and channel-deposit stacking in active, fault-bounded half-grabens. The model is used to reconstruct and predict the complex morphodynamics of fluvial meanders, their generated channel belts, and the associated lithofacies distributions that accumulate as heterogeneous fluvial successions in rift settings, constrained by data from seismic images and outcrop successions. The 3D modelling outputs are used to explore sedimentary heterogeneity at various spatio-temporal scales. Results show how the connectivity of sand-prone geobodies can be quantified as a function of subsidence rate, which itself decreases both along and away from the basin-bounding fault. In particular, results highlight the spatial variability in the size and connectedness of sand-prone geobodies that is seen in directions perpendicular and parallel to the basin axis, and that arises as a function of the interaction between spatial and temporal variations in rates of accommodation generation and fault-influenced changes in river morphodynamics. The results have applied significance, for example, to both hydrocarbon exploration and assessment of groundwater aquifers. The expected greatest connectivity of fluvial sandbody in a half-graben is primarily determined by the complex interplay between the frequency and rate of subsidence, the style of basin propagation, the rates of migration of channel belts, the frequency of avulsion and the proportion and spatial distribution of variably sand-prone channel and bar deposits.     

Insights into the “tectonic topography” of the present-day landscape of the central Iberian Peninsula (Spain)

The landscape of today's central Iberian Peninsula has been shaped by ongoing tectonic activity since the Tertiary. This landscape comprises a mountain ridge trending E–W to NW–SE, the Central System, separating two regions of smooth topography: the basins of the rivers Duero and Tajo. In this study, we explore interrelationships between topography and tectonics in the central Iberian Peninsula. Regional landscape features were analysed using a digital elevation model (DEM). Slope gradients and slope orientations derived from the DEM were combined to describe topographic surface roughness. Topography trend-surfaces inferred from harmonic analysis were used to define regional topographic features. Low roughness emphasizes the smooth nature of the basins' topography, where surfaces of homogeneous slope gradient and orientation dominate. High roughness was associated with abrupt changes in gradient and slope orientation such as those affecting crests, valley bottoms and scarp edges present in the mountain chain and in some deep incised valleys in the basins. One of the applications of roughness mapping was its capacity to isolate incised valley segments. The area distribution of incised rivers shows their prevalence in the east. On a regional scale, the topographic surface can be described as a train of NE–SW undulations or waves of 20 km wavelength. These undulations undergo changes in direction and interruptions limited by N–S-trending breaks. E–W and NE–SW troughs and ridges clearly mark structural uplifts and depressions within the Central System. These structures are transverse to the compressive NW–SE stress field that controlled the deformation of the central Iberian Peninsula from the Neogene to the present. They represent the upper crustal folding that accommodates Alpine shortening. N–S breaks coincide with Late Miocene faults that control the basins' sedimentation. Further, associated palaeoseismic structures suggest the recent tectonic activity of N–S faults in the eastern part of the Tajo Basin. Apatite fission track analysis data for this area suggest the occurrence of a significant uplift episode from 7 to 10 Ma which induced the river incisions appearing in the roughness map. N–S and NE–SW faults could be seismogenic sources for the current moderate to low seismic activity of the east Tajo Basin and southeast Central System. Although N–S fault activity has already been established, we propose its significant contribution to shaping the landscape.     

Natural subsidence of the Venice area during the last 60 Myr

Integrated geohistory analysis performed on high‐resolution stratigraphy of Venezia 1 and Lido 1 wells (Quaternary–Pliocene interval) and low‐resolution stratigraphy of a simulated well extending Lido 1 down to the base of Cenozoic (Palaeocene–Miocene interval) is used to reconstruct the interplay between subsidence and sedimentation that occurred in the Venice area (eastern Po Plain) during the last 60 Myr, and to discuss the relationships between calculated subsidence rates and time resolution of stratigraphic data. Both subsidence and sedimentation are mostly related to the tectonic evolution of the belts that surround the Venice basin, influencing the lithosphere vertical motions and the input of clastic sediments through time. In particular, two subsidence phases are recorded between 40–33.5 and 32.5–24 Myr (0.13 and 0.14 mm year^?1, respectively), coeval with tectonic phases in the Dinaric belt. Vice versa, during the main South‐Alpine orogenic phase (middle–late Miocene), quiescence or little uplift (?0.03 mm year^?1) reflects the location of the Venice area close to the peripheral bulge of the South‐Alpine foreland system. Early Pliocene evolution is characterised by a number of subsidence/uplift events, among which two uplifts occurred between 5–4.5 and 3–2.2 Myr (at ?0.4 and ?0.2 mm year^?1, respectively) and can be correlated with tectonic motions in the Apennines. During the last million years, the Venice area was initially characterised by uplift (?0.6 mm year^?1 rising to ?1.5 mm year^?1 between 0.4 and 0.38 Myr), eventually replaced by subsidence at a rate ranging between 1.6 and 1.0 mm year^?1 up to 0.12 Myr and then decreased to 0.4 mm year^?1, as an average, up to present. Our results highlight that time resolution of the stratigraphic dataset deeply influences the order of magnitude obtained for the calculated subsidence rate. This is because subsidence seems to have worked through short‐lived peaks (in the order of 10⁵ years), alternating with long relatively quiescent intervals. This suggests caution when components of subsidence are deduced by subtracting long‐term to short‐term subsidence rate.     

Tectonic control on sedimentary evolution of three North Atlantic borderland Mesozoic basins1

Multiple episodes of extensional tectonism dominated the formation of Mesozoic fault-bounded basins on the Grand Banks of Newfoundland, the Irish Continental Shelf and the central North Sea. A range of structural and stratigraphic responses in the Jeanne d'Arc, Porcupine and Moray Firth basins support widespread synchronous tectonic controls on sedimentation during one of these episodes, the Late Cimmerian. Rifting was preceded by a phase of related tectonism during which subsidence rates began to vary across broad areas but without significant fault block rotation. This Late Cimmerian ‘onset warp’ pattern of subsidence is considered to have been essential in the establishment of restricted anoxic basins from latest Oxfordian through Kimmeridgian (sensu gallico) time and the development of one prolific layer of organic-rich source rocks. The most prominent and widely recognized structural/lithostratigraphic response to Late Cimmerian rifting was the deposition of sediment wedges. Tithonian to early Valanginian strata generally thicken- into northerly trending faults in the Jeanne d'Arc and Porcupine basins, indicating that extensional stress was orientated WNW-ESE across a very broad area. The misalignment of this regional Late Cimmerian extensional stress with local inherited structural fabric may be responsible for transpressional uplift of individual fault blocks in the Outer Moray Firth basin. Sedimentological responses to Late Cimmerian rifting were varied, though a common lithofacies stacking pattern is recognized. Variably thick conglomerates and/or sandstones were widely deposited at the start of rift deformation, while palaeoenvironments ranged from alluvial and braid plain to submarine fan even within individual basins. The relatively coarse basal sediments fine upwards into a second layer of commonly organic-rich shales and mark The widest variations in palaeoenvironments and sediment thicknesses occurred during the last phase of Late Cimmerian rift tectonism, though all three basins show evidence of decreasing water depths, increasing oxygen levels and increasing grain size. This lithofacies stacking pattern of relatively coarse to fine to coarse (reservoir/source/reservoir) and the development of bounding unconformities are largely attributable to progressive changes in rift-controlled subsidence. Rift basin subsidence rates are interpreted to increase from a low at initiation of faulting to a mid-rift peak, followed by slowing subsidence to the end of extension. A number of counteracting crustal mechanisms that may account for progressive variations in rift-induced subsidence are considered.     

Small hollows in the Baikal Rift Zone

Large grabens, or rift valleys, are of the utmost significance in the neotectonic structure of the Baikal Rift Zone. It is also the home for numerous small hollows which are distinguished by their morphological diversity, structural positions and special features of neogeodynamics. The distribution and types of small hollows are considered, and their structural-morphological classification is suggested.     

Subsurface sediment accumulation patterns and their relationships with tectonic lineaments in the semi-arid Luni river basin, Rajasthan, Western India

Sediment accumulation patterns in the Luni basin have been studied on the basis of tubewell lithologs and Bouguer gravity anomaly profiles. East–West geologic transects using these data reveal several sediment-filled graben depressions, for example, the Digrana-Bhawal graben in the northern part, the Mangta-Sindari, Sindari-Bhimgoda, and Bhimgoda-Juna Motisara grabens in the central part; and the Dungari-Ratanpura and Ratanpura-Khanpur grabens in the southern part. Maximum sediment accumulation of more than 300 m is located in the southwestern part of the Luni basin, more specifically in the Ratanpura-Khanpur graben. Minor depressions also occur towards west of Jodhpur and east of Bhadrajun.Sediment filling in these graben depressions commenced with thick clay deposits followed by multistoried fining up sand and gravel sequences. Sediment accumulation centres are coincident with major tectonic lineaments and thus indicate that important loci of sediment accumulation are, possibly, a response to synsedimentary tectonics.