上海浅部黏土化学特性与沉积环境相关性

土体孔隙溶液化学特性反映其沉积环境,沉积环境影响土体的工程性质,其相关性是土力学的重要研究内容。本文首先详细介绍软土孔隙溶液化学特性的试验方法,并对上海浅层黏土展开试验研究。通过试验给出了土层各项化学特性指标的分布规律。结合上海地区海平面变化,探讨上海浅部土层的化学特性所反映的沉积环境变迁历史,尤其是第四纪海侵海退对土体化学特性的影响。分析土体的化学特性与其物理力学特性的相关性,获得了在不同沉积环境（海侵和海退）中软土的含盐量对灵敏度和物理指标的两种相反的影响规律。     

Environmental magnetism: an introduction

In environmental magnetism, the properties of magnetic minerals are used as proxy parameters for many purposes. Examples are paleoclimate analysis, paleoceanographic studies, provenance studies of sediments, studies of anthropogenically-induced pollution, and archeological investigations. Mineral-magnetic techniques are sensitive, require little sample preparation, are rapid, often grain-size indicative, and usually non-destructive. These techniques involve bulk properties which makes them complementary to geochemical micro-analytical techniques. Measurements include the field- and temperature-dependence of various types of induced and remanent magnetizations. Mineral-magnetic methods are continuously being improved. The underlying causal relations between observed mineral-magnetic properties and the processes that led to those properties, are becoming increasingly better understood, and the extended use of such properties as proxy parameters for many processes is foreseen. The following environmental magnetic applications are reviewed: the analysis of paleoclimatic variations in loess and other sediment types, the untangling of sedimentary features in piston cores, and the interpretation of the anthropogenic impact on the environment, in archeological studies and in studies of present-day pollution. The pathway between the provenance area and depositional site is shown to have a crucial impact on the magnetic properties.     

江汉平原沉积环境演化及对三峡贯通的指示

选取江汉平原孔深400.59m的新沟钻孔,通过对其40Ma以来的沉积物进行岩性描述及粒度特征的研究,探讨了此岩芯剖面沉积环境的演变过程。结果表明,该岩芯垂直剖面沉积物颗粒基本构成是以砂、粉砂、粘土为主,沉积环境变化频繁。根据粒度参数特征所反映的沉积环境意义,划分出4个沉积阶段: 3.93～3.66MaB.P.(深度400.59～375.03m)为深湖相沉积环境,   3.66～2.17MaB.P.(深度 375.03～.195.90m)为河湖相沉积环境,   2.17～1.77MaB.P.(深度195.90～147.08m)为浅湖相沉积环境,   1.77MaB.P.～0.11kaB.P.(深度147.08～0m)为河湖相交替频繁的沉积环境;  从而揭示了江汉平原新沟钻孔4.0Ma以来的沉积环境的演变过程。对比江汉平原新沟孔和周老孔的磁学参数及磁性矿物特征的研究结果,发现在新沟孔深度109.15～98.82m间江汉平原水系曾发生过重要调整,江汉平原的沉积环境和物质成分均发生了重大改变。该层位可能就是长江三峡贯通的层位,其贯通时间新沟孔古地磁年龄约为1.0MaB.P.左右。     

西太平洋维嘉平顶山沉积特征及富钴结壳资源意义

基于中国大洋36和41航次浅地层剖面数据,结合DSDP钻井及国内外相关研究,对西太平洋维嘉平顶山顶部沉积物的浅地层剖面特征、沉积环境、沉积时代、沉积物厚度分布特征等进行了研究,发现3种主要的地层反射特征,分别代表3个沉积单元;山顶沉积物的厚度分布呈现出3个沉积中心区和4个基岩裸露/沉积物稀薄区的特点;平顶山东部的沉积异常可能与始新世的第二次火山活动有关。根据富钴结壳的生长和发育特点,结合维嘉平顶山的沉积物分布特征,圈定了结壳资源潜力分布区。维嘉平顶山作为中国重要的富钴结壳合同区块,本次研究对其富钴结壳资源进一步的勘探工作具有指导意义。     

影响碎屑岩天然气储层物性的主要控制因素

碎屑岩天然气储层，尤其是埋藏历史较长、埋深较大的致密碎屑岩天然气储层物性的控制因素比较复杂，本文通过对我国中新生代主要含气盆地的碎屑岩储气层埋藏历史和成岩阶段与孔隙度关系的研究，提出了按产状将碎屑岩储层孔隙分为粒间孔、粒间溶孔、组分内孔隙和裂隙四种类型的划分方案，分析了各类孔隙对砂岩孔渗性的贡献。从碎屑颗粒物理性质和化学性质；砂岩中泥质杂基和自生粘土矿物；沉积速度与埋藏历史；碎屑岩粒径和分选程度；泥质岩成岩作用；构造背景和构造运动以及镜质体反射率和有机质成熟度等方面讨论了它们对碎屑岩天然气储层物性的控制机理。     

Depositional Environment and Lithofacies Analyses of Eocene Lacustrine Shale in the Bohai Bay Basin: Insights from Mineralogy and Elemental Geochemistry

The effect of various depositional parameters including paleoclimate, paleosalinity and provenance, on the depositional mechanism of lacustrine shale is very important in reconstructing the depositional environment. The classification of shale lithofacies and the interpretation of shale depositional environment are key features used in shale oil and gas exploration and development activity. The lower 3^rd member of the Eocene Shahejie Formation(Es₃^x shale) was sel...     

碳酸盐台地的类型、特征和沉积模式--兼论华北地台寒武纪陆表海-淹没台地的沉积样式

随着对现代碳酸盐沉积环境的系统调查和解释、以及对碳酸盐沉积原理认识的深化,自20世纪60年代,一系列碳酸盐沉积相模式得以建立,其中最引人注目的是Wilson和Tucker的工作。但在镶边陆棚及缓坡模式得到了广泛认可和使用的同时,对陆表海和淹没台地型沉积未能予以足够的重视。与过去相比,现今的海平面是相对较低的,因而没有出现陆表海广泛发育的情况。但在漫长的地质历史时期,陆表海曾经覆盖了广泛的克拉通区域,是碳酸盐沉积最重要的场所之一。本文在系统总结前人成果的基础上,将用于描述大尺度碳酸盐岩沉积环境的碳酸盐台地分为镶边陆棚、缓坡、陆表海、孤立台地和淹没台地5种类型分别描述,并重点强调了陆表海和淹没台地的沉积模式。华北地台寒武系大面积分布的潮坪沉积、鲕粒滩相灰岩和竹叶状风暴砾屑灰岩,以及频繁出现的台地淹没事件,为阐明陆表海和淹没台地的沉积提供了绝佳实例。这些实例和研究表明了碳酸盐沉积环境的多样性和沉积过程的复杂性,以及将今论古的困难性,从而为碳酸盐沉积原理的认识和沉积环境的解释提供新认识和新思路。     

Back analysis of the Kanowna Belle stope filling case history

A fully coupled multi-physics finite element model has been used to conduct a back-analysis of a stope filling case history at the Kanowna Belle (KB) mine in Western Australia. The model captures a number of important characteristics of mine backfill behaviour, including the evolution of strength and consolidation properties with cement hydration, the impact of chemical shrinkage (self-desiccation) and de-saturation. Material parameters for the constitutive model have been calibrated using published laboratory test data. A reasonable match between ideal and actual elements of response as revealed through in-situ measurements of total stress and pore pressure was obtained using these initial parameters. A parametric study was then performed which showed that the backfill strength parameters (friction angle, dilation and cohesion), the chemical volume shrinkage, the rate of cement hydration and the water retention properties all have a significant influence on the calculated states of stress within the stope.     

Peat/coal type and depositional environment—are they related?

Four bogs in New Zealand were investigated in order to understand the relationship between peat type and depositional environment. This relationship is important because peat type translates into coal type, and coal types can ultimately be used to infer how and under what conditions the original peat bog formed. In our study, no correlation was found between peat type and depositional environment in the four bogs examined. Moreover, no correlation was found between peat type and either tectonic setting or climate. Water table level and degree of fluctuation are the only parameters which seem to have a good causative relationship on peat type.The bogs, Whangamarino, Moanatuatua and Kopouatai in the North Island and Sponge Swamp in the South Island, all have different depositional settings ranging from coastal plain, to fluvial-meandering and fluvial-braided river floodplain. We found no diagnostic peat types that would allow those different environments to be distinguished from studies of the peat. Data from other tropical and temperate climate peat bogs also support our contention that no diagnostic peat types can distinguish particular depositional settings. However, the level and variability of water table does have a correlation, one that is also seen in bogs elsewhere.From our observations, we infer that the validity of using maceral ratios (directly related to coal type) to indicate depositional environment should be questioned. At best, coal type only represents to what degree the original plant components were degraded, but not how they were degraded. To infer other parameters such as depositional environment, tectonic setting or climate, other data (e.g. distribution of surrounding sediment types, palynology, etc.) must be collected and assessed.     

中国煤中硫的地球化学研究

燃烧过程中,煤中硫会以硫氧化物等形式释放出来,污染大气以至形成酸雨,对环境造成极大的影响。本文在对中国煤中硫全面分析的基础上．总结并分析了中国煤中硫在不同地区、不同煤层和不同形成环境中的含量与分布规律,阐述煤中硫形成的地质成因和影响因素．以及育机硫、无机硫和元素硫的赋存状态．概述了煤利用过程中硫的转化机理及其对环境的影响．提出了对煤中硫的研究趋势和今后研究方向与热点问题。     

A Comparative Study of Molecular Paleosalinity Indicators: Chromans, Tocopherols and C20 Isoprenoid Thiophenes in Miocene Lake Sediments (Nördlinger Ries, Southern Germany)

Distributions of alkylated chromans and C20 isoprenoid thiophenes were investigated in four organic-matter- and sulfur-rich black shales of Miocene age deposited in the ancient crater lake of the Nördlinger Ries (southern Germany), a meteorite impact crater. Paleosalinity parameters based on these compound classes generally confirm sedimentological evidence of increased salinity over certain periods of the lake's history, but the data from both groups of compounds are not consistent. Diagenetically related molecular constituents were therefore studied to estimate the sensitivity of these parameters. The influence of thiolanes on the isoprenoid thiophene parameter was found to be low, whereas too little is known at present about the origin and diagenetic fate of alkylated chromans to conclude definitely that an alkylated chroman paleosalinity parameter can reliably be applied to a wide range of depositional settings.     

Grain-size parameters of insoluble residues in mixed terrigenous-skeletal carbonate sediments and sedimentary rocks: some New Zealand examples

Grain-size parameters derived from the mechanical analysis of acid-insoluble residues from mixed terrigenous-shell beach sediments from Auckland, New Zealand, are more effective for interpreting the depositional processes, and for characterizing the beach environment on textural scatter plots, than are parameters based on the analysis of the total beach samples. This results mainly from the wide variations in size of hydraulically equivalent skeletal carbonate grains in the sediment, especially in the coarser size grades, but may also be accentuated by the local origin and susceptibility to alteration of the shell material. Compared with the total sediment grain-size distribution, the insoluble residues from the beach deposits are characteristically finer-grained, better sorted, and more consistently coarse-skewed and leptokurtic. The grain-size distribution characteristics of insoluble residues from several stratigraphic units in a sequence of Oligocene mixed terrigenous-skeletal shelf sediments in the South Auckland region distinguish depositional mechanisms and environmental energy levels for each unit that are consistent with interpretations made on the basis of carbonate petrography and palaeontology. With regard to the bulk content of terrigenous mud in the insoluble residues, the grain-size distribution of the fraction coarser than 4φ is alone diagnostic of the energy-time trends in these sediments. The grain-size parameters of the acid-insoluble residues in modern and ancient mixed terrigenous-skeletal carbonate sediments may provide more reliable criteria for distinguishing and characterizing the depositional environment of these deposits than do the parameters obtained from the size distribution of the total grain population.     

页岩油气储层纵向多重非均质性及其对开发的影响

页岩油气作为烃源岩层系内自生自储的油气资源,其可开发性受页岩储层特征的控制明显。由于不同类型富有机质页岩形成环境的差异性,页岩油气储层在纵向上具有多重非均质性,包括岩性的纵向非均质性、储层物性的纵向非均质性、岩石力学参数的纵向非均质性、地应力的纵向非均质性以及含气性特征的纵向非均质性等,这造成了页岩油气储层的纵向非均质性明显强于横向非均质性,有机质丰度、孔隙度、渗透率、储层的可压裂性、地应力、含气性及吸游比等参数在纵向上的变化均较大,且直接影响了后期页岩油气开发方案的设计与实施。优质开发目的层段的选择首先要考虑单段页岩油气储层的连续厚度在30~50 m左右、有机碳含量均值达到2.0%以上、有效孔隙度大于2.0%、岩石泊松比小于0.25、脆性较大、最小主应力相对上下邻层较小、含气性较高的层段。页岩油气开发井型的选择,水平井段的部署,压裂分段的长短、射孔簇的设计等均要充分考虑这种非均质性的影响。     

用自组织神经网络方法实现测井相定量识别

作者在本文中介绍了一种利用自组织神经网络进行测井相识别的方法。自组织神经网络是一种无导师学习算法，它通过网络自身的调节对输入进行聚类，近年来广泛应用于各类模式识别问题中。这里我们采用从测井曲线中提取出反映沉积环境的信息参数，再利用自组织神经网络进行测井相判别。此法从沉积成因角度出发，判别沉积相模式，消除了测井曲线中的不确定因素，更具代表性。     

Depositional deglaciation forms as indicators of different glacial and glaciomarginal environments

The current system of nomenclature for landform elements associated with deglaciation is often insufficient and inappropriate to describe the total depositional environment. There is a manifold transition of the deposits in regard to morphology, orientation, arrangement, material, and material-related properties. A multidimensional scheme constructed to be maximally informative of the depositional environment is presented.     

冀北森吉图盆地早白垩世义县组沉积特征及沉积环境

在野外剖面实测和室内分析的基础上, 对冀北森吉图盆地义县组沉积地层的岩性、沉积构造和古生物特征等进行了详细的研究, 并分析了其沉积环境。结果表明冀北森吉图盆地经历了沉积环境的巨大变化, 岩相类型和岩石组合频繁更替, 表现出快速沉积充填盆地的演化过程。其沉积环境主要可以分为河流沉积和湖泊沉积两种类型, 每一个沉积旋回都是以洪积扇到河流相沉积开始, 向湖泊相沉积演化, 湖泊沉积阶段主要以湖水相对动荡的滨浅湖沉积为主。同时发现火山作用对该时期沉积环境有较大的影响。     

Complex interplay between depositional and petrophysical environments in Holocene tidal carbonates (Al Ruwais,Qatar)

Carbonate rocks can be classified in terms of those properties relating to the pore system of lithified sediments, so‐called ‘petrophysical rock types’, or ‘depositional rock types’ which are categorized based on characteristics directly reflecting their original depositional environment. Whereas petrophysical rock types are typically used to identify and distribute rock bodies within a reservoir with similar flow characteristics, depositional rock types ignore pore types and capture sedimentary structures, lithology and fossils. Both classification systems are extensively used to describe reservoir rocks, but the degree of plurality between them remains poorly understood and is the motivation for this study. To examine the degree of congruency between the two classification schemes, a field assessment was conducted for a 175 km² area situated offshore Al Ruwais, northern Qatar, encompassing depositional environments spanning supratidal, intertidal, shallow subtidal and open marine conditions. A total of 350 surficial sediment samples were collected along 24 shore‐normal transects. Each sample was assigned a ‘petrophysical rock type’ class based on analysis of sedimentary texture (grain size and sorting). ‘Depositional rock type’ classes, by contrast, were defined with reference to faunal content and, in turn, classes of mineralogy were delimited by weighting this content against the mineralogy of each faunal category. Of course, the samples studied correspond to unconsolidated sediments and not to indurated rocks. However, considering only primary porosity and permeability preservation, it is reasonable to assume that the classified sediments would become petrophysical rock types and depositional rock types when consolidated, following their primary grain size, sorting and grain type distribution. Therefore, the term ‘rock type’ is retained here for ease of terminology but, for clarity, these are sediment samples. The discrete samples were interpolated into continuous surfaces describing the distribution of depositional rock types, petrophysical rock types and mineralogy, and spatial correspondence between those surfaces was statistically evaluated. In order to link these parameters with environment of deposition, their correlation with water depth (as audited from airborne light detection and ranging) and ecological habitat (mapped from DigitalGlobe satellite imagery) was also assessed. The data reveal that spatial distributions of sedimentary faunal, petrographic and mineralogical properties do not show exactly congruent patterns. Other meaningful trends do exist, however. For example, the occurrence of certain depositional rock types is indicative of particular petrophysical rock types, and vice versa. Further, connections between petrophysical rock types and mineralogy are emphasized and offer insight as to how the evolution of matrix porosity might be predicted via diagenetic models tuned to specific sediment textures. Useful relationships are also identified between the occurrence of petrophysical rock types and depositional rock types, and both ecological habitat and water depth. The potential of such dualities is two‐fold. Firstly, they can be applied to more realistically distribute petrophysical rock types and depositional rock types by environment of deposition in reservoir models and, secondly, the use of modern carbonate systems as subsurface analogues might be enhanced.     

皖南赣北宁国组和胡乐组沉积环境的古盐度特征及其地质意义

通过对皖南赣北地区早、中奥陶世宁国组和胡乐组合笔石黑色岩系的相当硼含量和镁铝比值的研究,揭示该时期皖南赣北海盆古海水具有不断淡化的历史;宁国组下部沉积环境的古盐度比宁国组上部以及胡乐组沉积环境的古盐度高;古海水发生明显淡化的转折期是在Ｕ．ａｕｓｔｒｏｄｅｎｔａｔｕｓ带（Ｎｒ）与Ｄ．ｅｌｌｅａｓｅ带（Ｎ８ａ）的界线附近;结合笔石动物群组合面貌的变化,古盐度有可能是早、中奥陶世笔石动物群演替的外界环境因素之一。     

秦岭造山带泥盆系热水沉积岩相应用研究及实例

构造-热水沉积岩相与盆地的古地理环境,热水沉积岩相与热水沉积成矿,热 (水 )流体岩相与构造背景、构造古地理,它们之间有密切地内在联系.应用热水沉积岩相、沉积相及沉积体系分析方法,对凤县铅硐山-双石铺三级构造热水成矿盆地进行研究.     

Fluvial-shallow marine-glaciofluvial depositional environments of the Ordovician System in Jordan

The Ordovician System, cropping out in southern and west-central Jordan, consists entirely of a 750 m thick clastic sequence that can be subdivided into six formations. The lower Disi Formation starts conformably above the Late Cambrian Umm Ishrin Formation. According to Cruziana furcifera occurring in the upper third of the Disi Formation, an Early Ordovician age is confirmed. The Disi Formation, consisting mainly of downstream accretion (DA) fluvial architectural element, was deposited in a proximal braidplain flowing N–NE from the southerly-located Arabian–Nubian Shield towards the Tethys Seaway. The braidplain depositional environment evolved into a braidplain-dominated delta through the middle and upper parts of the Disi Formation and the lower part of the overlying Um Saham Formation. The delta was replaced by siliciclastic tidal flats, that in turn evolved into an upper to lower shoreface environment through the upper part of the Um Saham Formation. The depositional environment attained the maximum bathymetric depth during the deposition of the lower and central parts of the third unit, the Hiswa Formation, where offshore graptolite-rich mudstone with intercalated hummocky cross-stratified tempestites were deposited. The Tethys Seaway regressed back through the upper part of the Hiswa Formation promoting a resumption of the lower–upper shoreface sedimentation. Oscillation between the lower to upper shoreface depositional environment characterized the entire fourth unit, the Dubaydib Formation, as well as the Tubeiylliat Sandstone Member of the fifth unit, the Mudawwara Formation. The depositional history of the Ordovician sequence was terminated by a glaciofluvial regime that finally was gradually replaced by a shoreface depositional environment throughout the last unit, the Ammar Formation.