首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 203 毫秒
1.
This study deals with an issue of thermo-mechanical facies, reflecting specific thermal and mechanical properties of the subglacial environment. The main objective of this study was to develop a model of glacitectionic deformation and its sedimentary record beneath fast and slow flowing ice sheets, based on investigations conducted in Wielkopolska (west central Poland). Sedimentary structures, mainly at the contact between subglacial tills and glacifluvial sediments, were recognized to delineate typical facies associations in a Weichselian glacigenic succession. Each association was interpreted as a record of the different depositional environments related to different subglacial conditions. Those investigations suggest the substratum was composed of frozen and dry, and wet and mobile spots, and four thermo-mechanical facies were distinguished: A – is representative of slower ice flow, dry and cold subglacial conditions, where driving stresses and normal effective pressure were high; B – is also related to slow ice flow and occurrence of cold subglacial permafrost, but with little amount of unfrozen water (however, higher than in facies A), with similar physical characteristics of the ice sheet as facies A; thermo-mechanical facies C and D represent wet and warm ice sole, with low normal effective pressure and driving stresses, thus lowering sediments’ shear strength and enabling high ice-flow velocities. We suggest that these facies have specific and non-random location, thereby revealing the relationship between subglacial thermo-mechanical conditions and ice sheet dynamics. Slow moving, cold-based ice occurred along ice sheet margins and inter-stream areas, whereas fast-moving, warm-based, well-lubricated ice, was typical of the axial parts of ice streams.  相似文献   

2.
Lusardi, B. A., Jennings, C. E. & Harris, K. L. 2011: Provenance of Des Moines lobe till records ice‐stream catchment evolution during Laurentide deglaciation. Boreas, 10.1111/j.1502‐3885.2011.00208.x. ISSN 0300‐9483. Mapping and analysis of deposits of the Des Moines lobe of the Laurentide Ice Sheet, active after the Last Glacial Maximum (LGM), reveal several texturally and lithologically distinct tills within what had been considered to be a homogeneous deposit. Although the differences between tills are subtle, minor distinctions are predictable and mappable, and till sheets within the area covered by the lobe can be correlated for hundreds of kilometres parallel to ice flow. Lateral till‐sheet contacts are abrupt or overlap in a narrow zone, coincident with a geomorphic discontinuity interpreted to be a shear margin. Till sheets 10 to 20 m thick show mixing in their lower 2 to 3 m. We suggest that: (i) lithologically distinct till sheets correspond to unique ice‐stream source areas; (ii) the sequence of tills deposited by the Des Moines lobe was the result of the evolution and varying dominance of nearby and competing ice streams and their tributaries; and (iii) in at least one instance, more than one ice stream simultaneously contributed to the lobe. Therefore the complex sequence of tills of subtly different provenances, and the unconformities between them record the evolution of an ice‐catchment area during Laurentide Ice Sheet drawdown. Till provenance data suggest that, after till is created in the ice‐stream source area, the subglacial conditions required for transporting till decline and incorporation of new material is limited.  相似文献   

3.
This research reconstructs ice-sheet processes operating during the Late Devensian in northeast England. The article assesses the lithostratigraphy of the Devensian glacial tills of Whitburn Bay, eastern County Durham, and presents the first detailed analysis of petrological, geochemical and biostratigraphical data to reconstruct lithostratigraphy, provenance and iceflow pathways. Two Devensian tractions tills (the Blackhall and Horden tills) are separated by a boulder pavement, pointing to a switch in ice-bed conditions and the production of a melt-out lag prior to deposition of the upper traction till, the Horden Till. The Blackhall Till contains Magnesian Limestone, Carboniferous Limestone, Whin Sill dolerite and Old Red Sandstone, suggesting a northwesterly source, probably from the Midland Valley and the Southern Uplands. The Horden Till contains erratics and heavy minerals derived from crystalline bedrock sources in the Cheviot Hills and northeast Scotland. Within the Horden Till are numerous sand, clay and gravel-filled canals incised downwards into the diamicton which are attributed to a low-energy, distributed, subglacial canal drainage system. Coupled with hydro-fractures and the boulder pavement, this suggests that a partially decoupled, fast-flowing ice stream deposited the Horden Till. The uphill, landward direction of ice movement indicates that the ice stream was confined in the North Sea Basin, possibly by the presence of Scandinavian Ice.  相似文献   

4.
《Quaternary Science Reviews》2005,24(12-13):1499-1520
The provenance of Late Quaternary Ross Embayment till was investigated by comparing the coarse sand composition of East and West Antarctic source area tills with till samples from across the Ross Sea. The West Antarctic samples from beneath the Whillans (B) and Kamb (C) ice streams are petrologically distinct from samples of lateral moraines flanking several East Antarctic outlet glaciers. The characteristic assemblage of four West Antarctic samples includes felsic intrusive and detrital sedimentary lithic fragments, plagioclase and abundant quartz. In contrast, most of the ten East Antarctic till samples contains abundant mafic intrusive and detrital sedimentary lithic fragments as well as less abundant quartz. The distinctive composition of these source areas can be linked to 33 samples from 20 cores of Last Glacial Maximum (LGM) age till distributed across the Ross Sea. Western Ross Sea till samples exhibit mineralogic and lithological similarities to East Antarctic till samples, although these western Ross Sea tills contain higher percentages of felsic intrusive and extrusive lithic fragments. Eastern Ross Sea till samples are compositionally similar to West Antarctic till, particularly in their abundance of quartz and dearth of mafic and extrusive lithic components. Central Ross Sea till exhibits compositional similarities to both East and West Antarctic source terranes including a mafic lithic component, and marks the confluence of ice draining from East and West Antarctica during the LGM, thus West Antarctic-derived ice streams did not advance into the western Ross Sea. This indicates that even if pre-LGM equivalents of the present Siple Coast ice streams existed, they did not simply expand allowing West Antarctic-derived ice to dominate the LGM Ross Ice Sheet.  相似文献   

5.
Surficial stratigraphic units of Aroostook County, Maine, have been mapped and formal stratigraphic names for these units are proposed. Evidence exists for at least two distinct glacial phases which are represented by three tills. Two of these tills were deposited penecontemporaneously either as the result of coalescing ice sheets or as the result of the thermal regime existing within a single ice sheet. The oldest till is named the St. Francis and is correlated with the Chaudière Till of southeastern Quebec. The other tills are named the Mars Hill and Van Buren tills, respectively, and are correlated with the Lennoxville till of southeastern Quebec. Interbedded stratified sediments associated with the St. Francis till are correlated with the Gayhurst Formation. Stratified sediments associated with Van Buren and Mars Hill tills are correlated with post Lennoxville sediments of Quebec. Granite-gneiss erratics of Canadian Shield provenance in the Van Buren till indicate advance of the Laurentide ice into northern Maine during late Wisconsinan time. Moraines in southern Aroostook County with associated outwash and eskers record general recession from coastal Maine. Recession occurred after the formation of the Pineo Ridge moraine in Maine and the St. Antonin-Highland Front moraine complex in Quebec. The Caribou-Winterville moraine complex in northern Maine marks the boundary between the penecontemporaneously deposited Van Buren and Mars Hill surface tills and is correlated with the Grand Falls moraine at Grand Falls, New Brunswick.  相似文献   

6.
Sixteen hundred stream sediments (<150 μm fraction) collected during regional geochemical surveys in central and SW Nigeria have high median and maximum concentrations of Zr that exceed corresponding Zr concentrations found in stream sediments collected from elsewhere in the World with similar bedrock geology. X-ray diffraction studies on a sub-set of the analysed stream sediments showed that Zr is predominantly found in detrital zircon grains. However, the main proximal source rocks (Pan-African ‘Older Granites’ of Nigeria and their Proterozoic migmatitic gneiss country rocks) are not enriched in zircon (or Zr). Nevertheless, U–Pb LA-ICP-MS dating with cathodoluminescence imaging on detrital zircons, both from stream sediment samples and underlying Pan-African ‘Older Granites’ confirms a local bedrock source for the stream sediment zircons. A combination of tropical/chemical weathering and continuous physical weathering, both by ‘wet season’ flash flooding and ‘dry season’ unidirectional winds are interpreted to have effectively broken down bedrock silicate minerals and removed much of the resultant clay phases, thereby increasing the Zr contents in stream sediments. The strong correlation between winnowing index (Th/Al) and Zr concentration across the study area support this interpretation. Therefore, ‘anomalous’ high values of Zr, as well as other elements concentrated in resistant ‘heavy’ minerals in Nigeria’s streams may not reflect proximal bedrock concentrations of these elements. This conclusion has important implications for using stream sediment chemistry as an exploration tool in Nigeria for primary metal deposits associated with heavy minerals.  相似文献   

7.
A three–till section in eastern Overijssel, eastern Netherlands, represents the most complete till sequence of the Older Saalian glaciation presently known from The Netherlands and adjacent Germany. On the basis of structural analyses, four different glacial events within one continuous glacial cover can be distinguished: (1) deposition of till 1 (lowest till) by ice probably moving in a southerly direction, (2) glaciotectonic dislocation of till 1 under a compressive strain regime acting towards the west, (3) deposition of till 2 by ice moving in a westerly direction, and (4) deposition of till 3 by southeasterly moving ice. During deposition of tills 2 and 3, the underlying older tills were subjected to a strong extensional tectonic regimc, leading among other things to the development of characteristic sheath folds. On the basis of directional and compositional characteristics, the three tills can be correlated with the till stratigraphy of the northern Netherlands.  相似文献   

8.
The most complete terrestrial sequence of Anglian (Elsterian) glacial sediments in western Europe was investigated in northeast Norfolk, England in order to reconstruct the evolution of the contemporary palaeoenvironments. Lithostratigraphically the glacial sediments in the northeast Norfolk coastal cliffs can be divided into the Northn Sea Drift and Lowestoft Till Formations. Three of the diamicton members of the North Sea Drift Formation (Happisburgh, Walcott and Cromer Diamictons) were deposited as lodgement and/or subglacial deformation till by grounded ice, but one, the Mundesley Diamicton, is waterlain and was deposited in an extensive glacial lake. Sands and fine sediments interbedded between the diamictons represent deltaic sands and glaciolacustrine sediments derived not solely from the melting ice in the north but also from extra-marginal rivers in the south. The Lowestoft Till Formation is not well preserved in the cliffs but includes lodgement till (Marly Drift till) and, most probably, associated meltwater deposits. Extensive glaciotectonism in the northern part of the area is shown to relate to oscillating ice that deposited the Cromer Diamicton and also partially to the ice sheet that deposited the Marly Drift till. It is suggested that during the Anglian Stage the present day northeast Norfolk coast was situated on the northwestern margin of an extensive glaciolacustrine basin. This basin was dammed by the Scandinavian ice sheet in the north and northeast. Because the grounding line of this ice sheet oscillated in space and time, part of the North Sea Drift diamictons were deposited directly by this ice. However, during ice retreat phases glaciolacustrine deposition comprised waterlain diamicton, sands and fines. When the Scandinavian ice sheet was situated in northernmost Norfolk, the British ice sheet (responsible for depositing the Marly Drift facies) entered the area from the west. This ice sheet partially deformed the North Sea Drift Formation sediments in the northern part of the area but not in the south, where the British ice sheet apparently terminated in water. The interplay of these two ice sheets on the northern and western margins of the glacial lake is thought to be the major determining factor for the accumulation of thick glacial deposits in this area during the Anglian glaciation.  相似文献   

9.
A field of uraniferous boulders was discovered in a drift-covered valley west of Dismal Lakes. Glacial geological information was combined with boulder location and trace element till geochemical data to model the dispersal of the boulders; and to predict their likely bedrock source. Uraniferous bedrock was eroded by the last, westward flowing glacial ice to cover the area. The debris was englacially transported and subsequently deposited during subglacial melt-out of ice block(s) stagnating below active ice. The distribution of the boulders forms acrude, westward-opening fan centred on the easternmost boulder and oriented with the last ice-flow direction. The largest uranium values from surface till samples (-2 μm fraction) occur 6.2 km east of the main boulder concentration or 1.5 km east of the first boulder occurrence. The likely bedrock source is 6.0 to 6.6 km east of the main boulder concentration.  相似文献   

10.
Understanding the pace and drivers of marine-based ice-sheet retreat relies upon the integration of numerical ice-sheet models with observations from contemporary polar ice sheets and well-constrained palaeo-glaciological reconstructions. This paper provides a reconstruction of the retreat of the last British–Irish Ice Sheet (BIIS) from the Atlantic shelf west of Ireland during and following the Last Glacial Maximum (LGM). It uses marine-geophysical data and sediment cores dated by radiocarbon, combined with terrestrial cosmogenic nuclide and optically stimulated luminescence dating of onshore ice-marginal landforms, to reconstruct the timing and rate of ice-sheet retreat from the continental shelf and across the adjoining coastline of Ireland, thus including the switch from a marine- to a terrestrially-based ice-sheet margin. Seafloor bathymetric data in the form of moraines and grounding-zone wedges on the continental shelf record an extensive ice sheet west of Ireland during the LGM which advanced to the outer shelf. This interpretation is supported by the presence of dated subglacial tills and overridden glacimarine sediments from across the Porcupine Bank, a westwards extension of the Irish continental shelf. The ice sheet was grounded on the outer shelf at ~26.8 ka cal bp with initial retreat underway by 25.9 ka cal bp. Retreat was not a continuous process but was punctuated by marginal oscillations until ~24.3 ka cal bp. The ice sheet thereafter retreated to the mid-shelf where it formed a large grounding-zone complex at ~23.7 ka cal bp. This retreat occurred in a glacimarine environment. The Aran Islands on the inner continental shelf were ice-free by ~19.5 ka bp and the ice sheet had become largely terrestrially based by 17.3 ka bp. This suggests that the Aran Islands acted to stabilize and slow overall ice-sheet retreat once the BIIS margin had reached the inner shelf. Our results constrain the timing of initial retreat of the BIIS from the outer shelf west of Ireland to the period of minimum global eustatic sea level. Initial retreat was driven, at least in part, by glacio-isostatically induced, high relative sea level. Net rates of ice-sheet retreat across the shelf were slow (62–19 m a−1) and reduced (8 m a−1) as the ice sheet vacated the inner shelf and moved onshore. A picture therefore emerges of an extensive BIIS on the Atlantic shelf west of Ireland, in which early, oscillatory retreat was followed by slow episodic retreat which decelerated further as the ice margin became terrestrially based. More broadly, this demonstrates the importance of localized controls, in particular bed topography, on modulating the retreat of marine-based sectors of ice sheets.  相似文献   

11.
The provenance of the Happisburgh Till and Corton Till of the Corton Formation is investigated using erratic clast lithologies and allochthonous palynomorphs to test whether the long held assumption that they were deposited by ice that originated in Scandinavia is valid. The results show a wide range of lithologies including Carboniferous Limestone and Coal Measures, and Permian Magnesian Limestone that are not found in Scandinavia, and an absence of distinctive Scandinavian material such as rhomb porphyry and larvikite. Lithologies found indicate deposition by an ice sheet which flowed southwards into north-east East Anglia from central and southern Scotland eroding and transporting materials derived from outcrops in these areas and from eastern England and the western margins of the southern North Sea Basin. It is concluded that the long held assumption that the Happisburgh Till and Corton Till of the Corton Formation were deposited by a Scandinavian ice sheet is erroneous and that they were instead deposited by Scottish ice.  相似文献   

12.
Pleistocene ice sheets can be reconstructed through three separate approaches: (1) Evidence based on glacial geological studies, such as erratic trains, till composition, crossing striations and exposures of multiple tills/nonglacial sediments. (2) Reconstructions based on glaciological theory and observations. These can be either two- or three-dimensional models; they can be constrained by ‘known’ ice margins at specific times; or they can be ‘open-ended’ with the history of growth and retreat controlled by parameters resting entirely within the model. (3) Glacial isostatic rebound after deglaciation provides a measure of the distribution of mass (ice) across a region. A ‘best fit’ ice sheet model can be developed that closely approximates a series of relative sea level curves within an area of a former ice sheet; in addition, the model should also provide a reasonable sea level fit to relative sea level curves at sites well removed from glaciation.This paper reviews some of the results of a variety of ice sheet reconstructions and concentrates on the various attempts to reconstruct the ice sheets of the last (Wisconsin, Weischelian, Würm, Devensian) glaciation. Evidence from glacial geology suggests flow patterns at variance with simple, single-domed ice sheets over North America and Europe. In addition, reconstruction of ice sheets from glacial isostatic sea level data suggests that the ice sheets were significantly thinner than estimates based on 18 ka equilibrium ice sheets (cf. Denton and Hughes, 1981). The review indicates it is important to differentiate between ice divides, which control the directions of glacial flow, and areas of maximum ice thickness, which control the glacial isostatic rebound of the crust upon deglaciation. Recent studies from the Laurentide Ice Sheet region indicate that the center of mass was not over Hudson Bay; that a major ice divide lay east of Hudson Bay so that flow across the Hudson Bay and James Bay lowlands was from the northeast; that Hudson Bay was probably open to marine invasions two or three times during the Wisconsin Glaciation; and that the Laurentide Ice Sheet was thinner than an equilibrium reconstruction would suggest.  相似文献   

13.
笔者近年对东南极内陆格罗夫山(Grove Mountains)开展了上新世以来冰盖表面波动的综合研究,运用冰川地质、地貌、土壤、沉积岩、孢粉组合及宇宙核素等各种方法手段,提出东南极大冰盖形成以后并非稳定演化至今,而在上新世早期时发生过大规模退缩,其前缘至少曾经退缩到格罗夫山地区,距现今冰盖边缘约400 km。之后,冰盖又迅速膨胀,到距今2.3 Ma时,冰面至少超过现今高度约400 m。以后冰面缓慢平稳下降,至1.6 Ma时,东南极冰盖进入第四纪振荡期,但重新上升的冰面再也没有超过现今高度的100 m以上。东南极冰盖大规模消融事件在全球尺度上也有所响应,例如北半球大冰盖形成,青藏高原整体剧烈隆升,塔里木盆地黄土出现等。这类行星尺度的气候变化可能与直布罗陀海峡关闭与地中海盐化事件,巴拿马地峡关闭等大地构造事件有关。  相似文献   

14.
Buried palaeo‐valley systems have been identified widely beneath lowland parts of the UK including eastern England, central England, south Wales and the North Sea. In the Midland Valley of Scotland palaeo‐valleys have been identified yet the age and genesis of these enigmatic features remain poorly understood. This study utilizes a digital data set of over 100 000 boreholes that penetrate the full thickness of deposits in the Midland Valley of Scotland. It identified 18 buried palaeo‐valleys, which range from 4 to 36 km in length and 24 to 162 m in depth. Geometric analysis has revealed four distinct valley morphologies, which were formed by different subglacial and subaerial processes. Some palaeo‐valleys cross‐cut each other with the deepest features aligning east–west. These east–west features align with the reconstructed ice‐flow direction under maximum conditions of the Main Late Devensian glaciation. The shallower features appear more aligned to ice‐flow direction during ice‐sheet retreat, and were therefore probably incised under more restricted ice‐sheet configurations. The bedrock lithology influences and enhances the position and depth of palaeo‐valleys in this lowland glacial terrain. Faults have juxtaposed Palaeozoic sedimentary and igneous rocks and the deepest palaeo‐valleys occur immediately down‐ice of knick‐points in the more resistant igneous bedrock. The features are regularly reused and the fills are dominated by glacial fluvial and glacial marine deposits. This suggests that the majority of infilling of the features happened during deglaciation and may be unrelated to the processes that cut them.  相似文献   

15.
Although substantial work has been done on the pre-glacial terraces of East Anglia, very little systematic work has been done to understand the origin of river terraces in East Anglia that have formed since ice last covered the region. This paper records the results of studies of exposures and borehole records in ‘classical’ Quaternary terrace landforms that are considered to have formed since the Anglian (MIS 12) Glaciation, in the middle Waveney Valley. These features have been examined in terms of their morphological and sedimentological properties, in order to provide a detailed record of their form and composition, understand their processes of formation, and identify their stratigraphical status. The results show that the main body of the highest terrace (Homersfield Terrace, Terrace 3) is not composed of river sediments, but of shallow marine sediments, and is a remnant of early Middle Pleistocene Wroxham Crag. River sediments, in the form of Anglian age (MIS 12) glaciofluvial Aldeby Sands and Gravels also exist in the area as a channel fill, cut through the Wroxham Crag, and reflect outwash erosion and sedimentation from a relatively proximal ice margin to the west. The results mean that the interpretations previously presented for the terrace landforms of the middle Waveney valley are not applicable. The issue of why the terrace stratigraphy, hitherto identified in East Anglia cannot be related to that for the River Thames to the south and the rivers of Midland England to the west, still requires further research.  相似文献   

16.
Characteristics of ribbed moraines, the dominating moraine type in southern Finnish Lapland, have been studied in detail. The ridges are composed of several till units, of which the bottommost units consist of mature basal tills and the surficial parts are enriched with local, short‐transport rock fragments and boulders in till and at the surface of ridges. As a result of this re‐examination a two‐step model of the formation process of ribbed moraines is presented. In the first stage, while cold‐based conditions prevailed, both the bottommost part of the ice sheet and the frozen, substrate fractured under compressive ice flow. Following glacial transport of fractured blocks and formation of the transverse ridge morphology, erosion between the ridges continued owing to freeze–thaw process under variable pressure conditions. In the areas with a low pre‐existing till sheet, the process caused quarrying of the bedrock surface and subsequent deposition of rock fragments and boulders under high pressure on the next ridge. The most suitable conditions for ribbed moraine formation existed during Late Weichselian deglaciation, after the Younger Dryas when the climate warmed very quickly, leading to an imbalance between a warm glacier surface and a cold base. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

17.
Regional‐scale, high‐resolution terrain data permit the study of landforms across south‐central Ontario, where the bed of the former Laurentide Ice Sheet is well exposed and passes downflow from irregular topography on Precambrian Shield highlands to flat‐lying Palaeozoic carbonate bedrock, and thick (50 to >200 m) unconsolidated sediment substrates. Rock drumlins and megagrooves are eroded into bedrock and mega‐scale glacial lineations (MSGL) occur on patchy streamlined till residuals in the Algonquin Highlands. Downflow, MSGL pass into juxtaposed rock and drift drumlins on Palaeozoic bedrock and predominantly till‐cored drumlins in areas of thick drift. The Lake Simcoe Moraines, now traceable for more than 80 km across the Peterborough drumlin field (PDF), form a distinct morphological boundary: downflow of the moraine system, drumlins are larger, broader and show no indication of subsequent reworking by the ice, whereas upflow of the moraines, a higher degree of complexity in bedform pattern and morphology is distinguished. Discrete radial and/or cross‐cutting flowset terminate at subtle till‐cored moraine ridges downflow of local topographic lows, indicating multiple phases of late‐stage ice flow with strong local topographic steering. More regional‐scale flow switching is evident as NW‐orientated bedforms modify drumlins south of the Oak Ridges Moraine, and radial flowset emanate from areas within the St. Lawrence and Ottawa River valleys. Most of the drumlins in the PDF formed during an early, regional drumlinization phase of NE–SW flow that followed the deposition of a thick regional till sheet. These were subsequently modified by local‐scale, topographically controlled flows that terminate at till‐cored moraines, providing evidence that the superimposed bedforms record dynamic ice (re)advances throughout the deglaciation of south‐central Ontario. The patterns and relationships of glacial landform distribution and characteristics in south‐central Ontario hold significance for many modern and palaeo‐ice sheets, where similar downflow changes in bed topography and substrate lithology are observed.  相似文献   

18.
Menzies, J. & Ellwanger, D. 2010: Insights into subglacial processes inferred from the micromorphological analyses of complex diamicton stratigraphy near Illmensee‐Lichtenegg, Höchsten, Germany. Boreas, 10.1111/j.1502‐3885.2010.00194.x. ISSN 0300‐9483. Investigations of a 30‐m‐high section of Pleistocene sediments at Illmensee‐Lichtenegg, Höchsten in Baden‐Württemberg provide detailed information on subglacial conditions beneath the Rhine Glacier outlet of the Alpine ice sheet in southern Germany. The sediment exposure extends from an upper cemented sand and gravel (Deckenschotter) into diamictic units that extend down to weathered Molasse bedrock. The exposure reveals sediments symptomatic of active syndepositional stress/strain processes ongoing beneath the ice sheet. Macrosedimentology reveals diamicton subfacies units and a strong uni‐direction of ice motion based on clast fabric analyses. At the microscale level, thin‐section analyses provide a substantially clearer picture of the dynamics of subglacial sediment deformation and till emplacement. Evidence based on detailed micromorphological analyses reveals microstructural strain and depositional markers that indicate a subglacial environment of ongoing soft bed deformation in which the diamictons can be readily identified as subglacial tills. Within this subglacial environment, distinct changes in pore‐water pressure and sediment rheology can be detected. These changes reveal fluctuating conditions of progressive, non‐pervasive deformation associated with rapid changes in effective stress and shear strain leading to till emplacement. This site, through the application of micromorphology, increases our understanding of localized subglacial conditions and till formation.  相似文献   

19.
This study of tills from the Eastern Alps, Austria, illustrates the insights obtained using microsedimentology on subglacial tills in the context of palaeogeographical reconstructions of glacier advances. Investigations of several sites with tills derived from both local glaciers and the ice‐sheet streaming of the Inn Glacier during the Last Glacial Maximum and its termination reveal a detailed picture of subglacial sedimentology that provides evidence of soft sediment subglacial deformation under polythermal conditions. All the tills exhibit microstructures that are proxy evidence of significant changes in till rheology. The tills originate from multiple sources, incorporating older tills and other deposits picked up by the subglacial deformation within a polythermal but dominantly warm temperate subglacial thermal regime. The analyses of till microstructures reveal a direct relationship between basal ice strain conditions and their development. A hypothesis is derived, from the various microstructures observed in these Austrian tills formed under soft sediment deforming basal ice conditions, that suggests that with basal thermal changes and fluctuations in clay content, pore‐water content and pressure, microstructures form in a non‐random manner. It is postulated that in clay‐deficient sediments, edge‐to‐edge events are most likely to occur first; and where clay content increases, grain stacks, rotation structures, deformation bands and, finally, shear zones are likely to evolve in an approximate sequential manner. After repeated transport, emplacement, reworking and, probably, further shearing and deformation events, an emplaced ‘till’, as observed in these Austrian tills, will form that carries most, if not all of these microstructures, in varying percentages. Finally, the impact of the Inn Glacier Ice Stream on these tills is not easily detected and/or differentiated, but indications of high pore water and probable dilatant events leading to reductions in the number of edge‐to‐edge events point to the impact of fast or thick ice upon these subglacial tills.  相似文献   

20.
Nick Eyles   《Sedimentary Geology》2006,190(1-4):257-268
Water plays a dominant role in many glacial processes and the erosional, depositional and climatic significance of meltwaters and associated fluvioglacial processes cannot be overemphasized. At its maximum extent c. 20,000 years ago, the volume of the Laurentide ice sheet was 33 × 106 km3 (about the same as the volume of all ice present today on planet Earth). The bulk of this was released as water in little more than 10,000 years. Pulses of meltwater flowing to the Atlantic Ocean from large ice dammed lakes altered thermohaline circulation of the world's oceans and global climate. One such discharge event via Hudson Bay at 8200 years BP released 160,000 km3 of water in 12 months. Global sea levels recovered from glacial maximum low stands reached at about 20,000 years ago at an average rate of 15 m per thousand years but estimates of shorter term rates suggest as much as 20 m sea level rise in 1000 years and for short periods, rates as high as 4 m per hundred years. Meltwaters played a key role in lubricating ice sheet motion (and thus areal abrasion) across the inner portions of the ice sheet where it slid over rigid crystalline bedrock of the Canadian Shield. The recharge of meltwater into the ice sheets bed was instrumental in generating poorly sorted diamict sediments (till) by sliding-induced shearing and deformation of overpressured sediment and soft rock. The transformation of overpressured till into hyperconcentrated slurries in subglacial channels may have generated a highly effective erosional tool for selective overdeepening and sculpting of bedrock substrates. Some workers credit catastrophic subglacial ‘megafloods’ with the formation of drumlins and flutes on till surfaces. Subglacial melt river systems were instrumental in reworking large volumes of glaciclastic sediment to marine basins; it has been estimated that less than 6% of the total volume of glaciclastic sediment produced during the Pleistocene remains on land. Fluvioglacial and glaciolacustrine sediments and landforms dominate large tracts of the ‘glacial’ landscape in North America. The recharge of subglacial meltwater into underlying bedrock and sediment aquifers created transient reversals in the long-term equilibrium flow directions of basinal fluids. With regard to pre-Pleistocene glacial record, meltwaters moved enormous volumes of terrestrial ‘glaciclastic’ sediment to marine basins and thus played a key role in preserving a record of glaciation, a record otherwise almost entirely lost on land.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号