边界层参数化影响“梅花”台风的敏感性试验

以GRAPES-TCM为试验模式,对1109台风“梅花”进行了36次72 h的预报试验,通过试验分析了2种边界层参数化方案——MRF方案与YSU方案在不同情况下对台风预报的影响.结果显示:“梅花”路径与强度对边界层方案的变化都表现出一定的敏感性,敏感性大小与对流参数化方案、台风的初始强度等因素有关,强度的敏感性比路径更明显;对弱台风的路径与强度,YSU方案的总体预报效果优于MRF方案,对于强台风,2种边界层方案中MRF方案的路径预报效果更好,哪种方案的强度预报效果更好与对流参数化方案有关;无论何种情况,YSU方案预报的“梅花”强度都明显强于MRF方案,YSU方案预报的降水及感热通量与潜热通量总体上大于MRF方案;YSU方案时更多的感热通量和潜热通量与该方案时边界层更强的湍流混合有关,更多的潜热通量导致更多的降水,从而释放更多的潜热,更多的潜热释放以及更多的感热通量导致台风强度更强.     

Sensitivity of simulated cyclone Gonu intensity and track to variety of parameterizations: Advanced hurricane WRF model application

Domain configuration and several physical parameterization settings such as planetary boundary layer, cumulus convection, and ocean–atmosphere surface flux parameterizations can play significant roles in numerical prediction of tropical cyclones. The present study focuses to improve the prediction of the TC Gonu by investigating the sensitivity of simulations to mentioned configurations with the Advanced Hurricane WRF model. The experiments for domain design sensitivity with 27 km resolution has been shown moving the domains towards the east improve the results, due to better account for the large-scale process. The fixed and movable nests on a 9-km grid were considered separately within the coarse domain and their results showed that despite salient improvement in simulated intensity, an accuracy reduction in simulated track was observed. Increasing horizontal resolution to 3 km incredibly reduced the simulated intensity accuracy when compared to 27 km resolution. Thereafter, different initial conditions were experimented and the results have shown that the cyclone of 1000 hPa sea level pressure is the best simulation initial condition in predicting the track and intensity for cyclone Gonu. The sensitivity of simulations to ocean–atmosphere surface-flux parameterizations on a 9-km grid showed the combination of ‘Donelan scheme’ for momentum exchanges along with ‘Large and Pond scheme’ for heat and moisture exchanges provide the best prediction for cyclone Gonu intensity. The combination of YSU and MYJ PBL scheme with KF convection for prediction of track and the combination of YSU PBL scheme with KF convection for prediction of intensity are found to have better performance than the other combinations. These 22 sensitivity experiments also implicitly lead us to the conclusion that each particular forecast aspect of TC (e.g., track, intensity, etc.) will require its own special design.     

Multi-Physics ensemble prediction of tropical cyclone movement over Bay of Bengal

Ensemble prediction methodology based on variations in physical process parameterizations in tropical cyclone track prediction has been assessed. Advanced Research Weather Research and Forecasting model with 30-km resolution was used to make 5-day simulation of the movement of Orissa super cyclone (1999), one of the most intense tropical cyclones over the North Indian Ocean. Altogether 36 ensemble members with all possible combinations of three cumulus convection, two planetary boundary layer and six cloud microphysics parameterization schemes were produced. A comparison of individual members indicated that Kain–Fritsch cumulus convection scheme, Mellor–Yamada–Janjic planetary boundary layer scheme and Purdue Lin cloud microphysics scheme showed better performance. The best possible ensemble formulation is identified based on SPREAD and root mean square error (RMSE). While the individual members had track errors ranging from 96–240 km at 24 h to 50–803 km at 120 h, most of the ensemble predictions show significant betterment with mean errors less than 130 km up to 120 h. The convection ensembles had large spread of the cluster, and boundary layer ensembles had significant error disparity, indicating their important roles in the movement of tropical cyclones. Six-member ensemble predictions with cloud microphysics schemes of LIN, WSM5, and WSM6 produce the best predictions with least of RMSE, and large SPREAD indicates the need for inclusion of all possible hydrometeors in the simulation and that six-member ensemble is sufficient to produce the best ensemble prediction of tropical cyclone tracks over Bay of Bengal.     

China summer precipitation simulations using an optimal ensemble of cumulus schemes

RegCM3 (REGional Climate Model) simulations of precipitation in China in 1991 and 1998 are very sensitive to the cumulus parameterization. Among the four schemes available, none has superior skills over the whole of China, but each captures certain observed signals in distinct regions. The Grell scheme with the Fritsch-Chappell closure produces the smallest biases over the North; the Grell scheme with the Arakawa-Schubert closure performs the best over the southeast of 100°E; the Anthes-Kuo scheme is superior over the northeast; and the Emanuel scheme is more realistic over the southwest of 100°E and along the Yangtze River Basin. These differences indicate a strong degree of independence and complementarity between the parameterizations. As such, an ensemble is developed from the four schemes, whose relative contributions or weights are optimized locally to yield overall minimum root-mean-square errors from observed daily precipitation. The skill gain is evaluated by applying the identical distribution of the weights in a different period. It is shown that the ensemble always produces gross biases that are smaller than the individual schemes in both 1991 and 1998. The ensemble, however, cannot eliminate the large rainfall deficits over the southwest of 100°E and along the Yangtze River Basin that are systematic across all schemes. Further improve-ments can be made by a super-ensemble based on more cumulus schemes and/or multiple models.     

RegCM3模式在西北地区的应用研究Ⅱ:区域选择及参数化方案的敏感性

通过数值模拟方法,研究了降水对区域尺度、积云对流参数化等的敏感性.结果表明:由于较小区域尺度的模式内部场和大尺度分析场激发的外强迫之间有更强的束缚,这种束缚使得内外强迫更容易达到一致.小区域尺度模拟的降水型比大的区域尺度的模拟更好,但同时,大的区域尺度消弱了由于模式侧边界效应产生的虚假动力效应,模拟的降水在量值上更加接近于观测值.因此,进行区域气候模拟时,须根据需要对模式区域进行仔细的选择.结果同时表明,由于Grell方案倾向于模拟更多的对流降水,因此Kuo-Anthes方案对西北地区降水型和量值的模拟比Grell方案更接近于实际.由于地形对于降水的重要意义,在复杂地形下进行区域气候模拟时有必要在模式中仔细描述地形.     

Impact of physical parameterization schemes on numerical simulation of super cyclone Gonu

The objective of this study is to investigate in detail the sensitivity of cumulus, planetary boundary layer and explicit cloud microphysics parameterization schemes on intensity and track forecast of super cyclone Gonu (2007) using the Pennsylvania State University-National Center for Atmospheric Research Fifth-Generation Mesoscale Model (MM5). Three sets of sensitivity experiments (totally 11 experiments) are conducted to examine the impact of each of the aforementioned parameterization schemes on the storm’s track and intensity forecast. Convective parameterization schemes (CPS) include Grell (Gr), Betts–Miller (BM) and updated Kain–Fritsch (KF2); planetary boundary layer (PBL) schemes include Burk–Thompson (BT), Eta Mellor–Yamada (MY) and the Medium-Range Forecast (MRF); and cloud microphysics parameterization schemes (MPS) comprise Warm Rain (WR), Simple Ice (SI), Mixed Phase (MP), Goddard Graupel (GG), Reisner Graupel (RG) and Schultz (Sc). The model configuration for CPS and PBL experiments includes two nested domains (90- and 30-km resolution), and for MPS experiments includes three nested domains (90-, 30- and 10-km grid resolution). It is found that the forecast track and intensity of the cyclone are most sensitive to CPS compared to other physical parameterization schemes (i.e., PBL and MPS). The simulated cyclone with Gr scheme has the least forecast track error, and KF2 scheme has highest intensity. From the results, influence of cumulus convection on steering flow of the cyclone is evident. It appears that combined effect of midlatitude trough interaction, strength of the anticyclone and intensity of the storm in each of these model forecasts are responsible for the differences in respective track forecast of the cyclone. The PBL group of experiments has less influence on the track forecast of the cyclone compared to CPS. However, we do note a considerable variation in intensity forecast due to variations in PBL schemes. The MY scheme produced reasonably better forecast within the group with a sustained warm core and better surface wind fields. Finally, results from MPS set of experiments demonstrate that explicit moisture schemes have profound impact on cyclone intensity and moderate impact on cyclone track forecast. The storm produced from WR scheme is the most intensive in the group and closer to the observed strength. The possible reason attributed for this intensification is the combined effect of reduction in cooling tendencies within the storm core due to the absence of melting process and reduction of water loading in the model due to absence of frozen hydrometeors in the WR scheme. We also note a good correlation between evolution of frozen condensate and storm intensification rate among these experiments. It appears that the Sc scheme has some systematic bias and because of that we note a substantial reduction in the rain water formation in the simulated storm when compared to others within the group. In general, it is noted that all the sensitivity experiments have a tendency to unrealistically intensify the storm at the later part of the integration phase.     

物理过程参数化方案对中国夏季降水日变化模拟的影响

系统地分析了不同陆面过程、辐射传输以及积云对流参数化方案对区域气候模式模拟中国夏季降水日变化能力的影响,发现日内最大标准化降水及其出现时刻的模拟对不同模式物理过程的组合方案敏感。陆面过程、辐射传输参数化方案只影响降水强度的模拟,而对降水日变化形式和峰值出现时间模拟的影响较小, 降水日变化形式的模拟对积云对流参数化方案敏感且与模拟区域的选择关系密切。Grell方案对青藏高原东部、长江中游地区夏季降水的日变化特征具有较好模拟能力,Kuo和Anthes Kuo方案较好地模拟出了东北、华南地区夏季降水的日变化特征,BM方案仅能模拟华南地区夏季降水的日变化特征。4种积云对流参数化方案均不能模拟出江淮—华北地区夏季降水日变化的双峰值结构。     

An HWRF-based ensemble assessment of the land surface feedback on the post-landfall intensification of Tropical Storm Fay (2008)

While tropical cyclones (TCs) usually decay after landfall, Tropical Storm Fay (2008) initially developed a storm central eye over South Florida by anomalous intensification overland. Unique to the Florida peninsula are Lake Okeechobee and the Everglades, which may have provided a surface feedback as the TC tracked near these features around the time of peak intensity. Analysis is done with the use of an ensemble model-based approach with the Developmental Testbed Center (DTC) version of the Hurricane WRF (HWRF) model using an outer domain and a storm-centered moving nest with 27- and 9-km grid spacing, respectively. Choice of land surface parameterization and small-scale surface features may influence TC structure, dictate the rate of TC decay, and even the anomalous intensification after landfall in model experiments. Results indicate that the HWRF model track and intensity forecasts are sensitive to three features in the model framework: land surface parameterization, initial boundary conditions, and the choice of planetary boundary layer (PBL) scheme. Land surface parameterizations such as the Geophysical Fluid Dynamics Laboratory (GFDL) Slab and Noah land surface models (LSMs) dominate the changes in storm track, while initial conditions and PBL schemes cause the largest changes in the TC intensity overland. Land surface heterogeneity in Florida from removing surface features in model simulations shows a small role in the forecast intensity change with no substantial alterations to TC track.     

Prediction of severe tropical cyclones over the Bay of Bengal during 2007–2010 using high-resolution mesoscale model

In this paper, the performance of a high-resolution mesoscale model for the prediction of severe tropical cyclones over the Bay of Bengal during 2007?C2010 (Sidr, Nargis, Aila, and Laila) is discussed. The advanced Weather Research Forecast (WRF) modeling system (ARW core) is used with a combination of Yonsei University PBL schemes, Kain-Fritsch cumulus parameterization, and Ferrier cloud microphysics schemes for the simulations. The initial and boundary conditions for the simulations are derived from global operational analysis and forecast products of the National Center for Environmental Prediction-Global Forecast System (NCEP-GFS) available at 1°lon/lat resolution. The simulation results of the extreme weather parameters such as heavy rainfall, strong wind and track of those four severe cyclones, are critically evaluated and discussed by comparing with the Joint Typhoon Warning Center (JTWC) estimated values. The simulations of the cyclones reveal that the cyclone track, intensity, and time of landfall are reasonably well simulated by the model. The mean track error at the time of landfall of the cyclone is 98?km, in which the minimum error was found to be for the cyclone Nargis (22?km) and maximum error for the cyclone Laila (304?km). The landfall time of all the cyclones is also fairly simulated by the model. The distribution and intensity of rainfall are well simulated by the model as well and were comparable with the TRMM estimates.     

The sensitivity to the microphysical schemes on the skill of forecasting the track and intensity of tropical cyclones using WRF-ARW model

The Advanced Research WRF (ARW) model is used to simulate Very Severe Cyclonic Storms (VSCS) Hudhud (7–13 October, 2014), Phailin (8–14 October, 2013) and Lehar (24–29 November, 2013) to investigate the sensitivity to microphysical schemes on the skill of forecasting track and intensity of the tropical cyclones for high-resolution (9 and 3 km) 120-hr model integration. For cloud resolving grid scale (<5 km) cloud microphysics plays an important role. The performance of the Goddard, Thompson, LIN and NSSL schemes are evaluated and compared with observations and a CONTROL forecast. This study is aimed to investigate the sensitivity to microphysics on the track and intensity with explicitly resolved convection scheme. It shows that the Goddard one-moment bulk liquid-ice microphysical scheme provided the highest skill on the track whereas for intensity both Thompson and Goddard microphysical schemes perform better. The Thompson scheme indicates the highest skill in intensity at 48, 96 and 120 hr, whereas at 24 and 72 hr, the Goddard scheme provides the highest skill in intensity. It is known that higher resolution domain produces better intensity and structure of the cyclones and it is desirable to resolve the convection with sufficiently high resolution and with the use of explicit cloud physics. This study suggests that the Goddard cumulus ensemble microphysical scheme is suitable for high resolution ARW simulation for TC’s track and intensity over the BoB. Although the present study is based on only three cyclones, it could be useful for planning real-time predictions using ARW modelling system.     

Evaluation of the weather research and forecasting (WRF) model over Guyana

In the present study, diagnostic studies were undertaken using station-based rainfall data sets of selected stations of Guyana to understand the variability of rainfall. The multidecadal variation in rainfall of coastal station Georgetown and inland station Timehri has shown that the rainfall variability was less during the May–July (20–30%) of primary wet season compared to the December--January (60–70%) of second wet season. The rainfall analysis of Georgetown based on data series from 1916 to 2007 shows that El Niño/La Niña has direct relation with monthly mean rainfall of Guyana. The impact is more predominant during the second wet season December--January. A high-resolution Weather Research and Forecasting model was made operational to generate real-time forecasts up to 84 h based on 00 UTC global forecast system (GFS), NCEP initial condition. The model real-time rainfall forecast during July 2010 evaluation has shown a reasonable skill of the forecast model in predicting the heavy rainfall events and major circulation features for day-to-day operational forecast guidance. In addition to the operational experimental forecast, as part of model validation, a few sensitivity experiments are also conducted with the combination of two cloud cumulus (Kain--Fritsch (KF) and Betts–Miller–Janjic (BMJ)) and three microphysical schemes (Ferrier et al. WSM-3 simple ice scheme and Lin et al.) for heavy rainfall event occurred during 28–30 May 2010 over coastal Guyana and tropical Hurricane ‘EARL’ formed during 25 August–04 September 2010 over east Caribbean Sea. It was observed that there are major differences in the simulations of heavy rainfall event among the cumulus schemes, in spite of using the same initial and boundary conditions and model configuration. Overall, it was observed that the combination of BMJ and WSM-3 has shown qualitatively close to the observed heavy rainfall event even though the predicted amounts are less. In the case of tropical Hurricane ‘EARL’, the forecast track in all the six experiments based on 00 UTC of 28 August 2010 initial conditions for the forecast up to 84 h has shown that the combination of KF cumulus and Ferrier microphysics scheme has shown less track errors compared to other combinations. The overall average position errors for all the six experiments taken together work out to 103 km in 24, 199 km in 48, 197 km in 72 and 174 km in 84 h.     

Atmospheric mesoscale conditions during the Boothbay meteotsunami: a numerical sensitivity study using a high-resolution mesoscale model

The article aims to test the sensitivity of high-resolution mesoscale atmospheric model to fairly reproduce atmospheric processes that were present during the Boothbay Harbor meteotsunami on 28 October 2008. The simulations were performed by the Weather and Research Forecasting (WRF) model at 1-km horizontal grid spacing by varying initial conditions (ICs) and lateral boundary conditions (LBCs), nesting strategy, simulation lead time and microphysics and convective parameterizations. It seems that the simulations that used higher-resolution IC and LBC were more successful in reproduction of precipitation zone and surface pressure oscillations caused by internal gravity waves observed during the event. The results were very sensitive to the simulation lead time and to the choice of convective parameterization, while the choice of microphysics parameterization and the type of nesting strategy (one-way or two-way) was less important for reproducibility of the event. The success of the WRF model appears limited to very short-range forecasting, most advanced parameterizations, and very high-resolution grid spacing; therefore, the applicability of present atmospheric mesoscale models to future operational meteotsunami warning systems still has a lot of room for improvements.     

A Study on the Impact of Parameterization of Physical Processes on Prediction of Tropical Cyclones over the Bay of Bengal With NCAR/PSU Mesoscale Model

Prediction of the track and intensity of tropical cyclones is one of the most challenging problems in numerical weather prediction (NWP). The chief objective of this study is to investigate the performance of different cumulus convection and planetary boundary layer (PBL) parameterization schemes in the simulation of tropical cyclones over the Bay of Bengal. For this purpose, two severe cyclonic storms are simulated with two PBL and four convection schemes using non-hydrostatic version of MM5 modeling system. Several important model simulated fields including sea level pressure, horizontal wind and precipitation are compared with the corresponding verification analysis/observation. The track of the cyclones in the simulation and analysis are compared with the best-fit track provided by India Meteorological Department (IMD). The Hong-Pan PBL scheme (as implemented in NCAR Medium Range Forecast (MRF) model) in combination with Grell (or Betts-Miller) cumulus convection scheme is found to perform better than the other combinations of schemes used in this study. Though it is expected that radiative processes may not have pronounced effect in short-range forecasts, an attempt is made to calibrate the model with respect to the two radiation parameterization schemes used in the study. And the results indicate that radiation parameterization has noticeable impact on the simulation of tropical cyclones.     

青藏铁路沿线地表和路基表面热力学模式(Ⅲ):参数化方案

以物理过程分析为基础,根据野外实测资料设计了青藏铁路沿线地表和路基表面热力学模式中的大气辐射参数化方案,对直接太阳辐射、大气散射辐射、大气向下长波辐射参数进行处理,得到了较好的结果.在无云大气条件下,对直接太阳辐射透过率和大气散射辐射以太阳天顶角进行参数化;对大气向下长波辐射以大气等效辐射率及气温进行参数化;在云天条件下,基于晴阴比的云量参数化和基于气候资料的云天系数参数化都各有较好的效果.对土壤热通量的参数化方法和拖曳系数的取值问题进行了讨论,更完善的方法还有待于与实验测量工作相结合.     

Simulation of severe thunder storm event: a case study over Pune,India

Numerical simulation of a typical tropical thunder storm event at Pune (18.53°N, 73.85°E), India, has been performed using the three nested domain configuration of Weather Research and Forecasting-Advanced Research Weather Model (version 3.2). The model simulations have been compared with observations. Sensitivity to cumulus parameterization schemes, namely Betts–Miller (BM), Grell–Devenyi (GD), and Kain–Fritsch (KF), for simulation of vertical structure and time evolution of weather parameters has been evaluated using observations from automatic weather station and global positioning system radiosonde ascents. Comparison of spatial distribution of 24-h accumulated rain with Tropical Rainfall Measuring Mission data shows that BM scheme could simulate better rain than GD and KF schemes. The BM scheme could well simulate the development of storm and heavy rain as it could generate sufficiently humid and deep layer in the lower and middle atmosphere, along with co-existence of updrafts and downdrafts and frozen hydrometeors at the middle level and rain water near the surface.     

Impact of cloud microphysics and cumulus parameterization on simulation of heavy rainfall event during 7–9 October 2007 over Bangladesh

In the present study, the Advanced Research WRF (ARW) version 3.2.1 has been used to simulate the heavy rainfall event that occurred between 7 and 9 October 2007 in the southern part of Bangladesh. Weather Research and Forecast (WRF–ARW version) modelling system with six different microphysics (MP) schemes and two different cumulus parameterization (CP) schemes in a nested configuration was chosen for simulating the event. The model domains consist of outer and inner domains having 9 and 3 km horizontal resolution, respectively with 28 vertical sigma levels. The impacts of cloud microphysical processes by means of precipitation, wind and reflectivity, kinematic and thermodynamic characteristics of the event have been studied. Sensitivity experiments have been conducted with the WRF model to test the impact of microphysical and cumulus parameterization schemes in capturing the extreme weather event. NCEP FNL data were used for the initial and boundary condition. The model ran for 72 h using initial data at 0000 UTC of 7 October 2007. The simulated rainfall shows that WSM6–KF combination gives better results for all combinations and after that Lin–KF combination. WSM3–KF has simulated, less area average rainfall out of all MP schemes that were coupled with KF scheme. The sharp peak of relative humidity up to 300 hPa has been simulated along the vertical line where maximum updraft has been found for all MPs coupled with KF and BMJ schemes. The simulated rain water and cloud water mixing ratio were maximum at the position where the vertical velocity and reflectivity has also been maximum. The production of rain water mixing ratio depends on MP schemes as well as CP schemes. Rainfall depends on rain water mixing ratio between 950 and 500 hPa. Rain water mixing ratio above 500 hPa level has no effect on surface rain.     

分辨率和陆面方案对长江流域短期气候预测影响

利用区域气候模式RegCM4.5,分别选取不同陆面参数化方案和空间分辨率,对5个长江流域降水异常年份进行短期气候回报试验,分析对气温和降水预测效果的影响及其最优组合。结果表明:空间分辨率的提高可以改善流域降水和气温的预测性能;而不同陆面方案引起的地表净辐射能量分布不同及其地表蒸散差异,最终导致流域内气温和降水预测效果不一致。RegCM（CLM4.5+30 km）对流域内小雨预测结果最好,而RegCM（BATS+30 km）预测流域内大雨和暴雨效果最优;RegCM（CLM3.5+30 km）对流域内气温预测能力最好。     

A distributed water-heat coupled model for mountainous watershed of an inland river basin in Northwest China (III) using the outputs from Mesoscale model version 5

The distributed water-heat coupled (DWHC) model is calibrated, with the help of the Mesoscale model version 5 (MM5), by calculating the daily precipitation, the daily average air temperature at the 2.0 m heights and the daily potential evaporation in Heihe mountainous watershed area and its vicinity (96.786°∼102.284°E, 37.328°∼40.601°N, 17 × 10⁴ km²), from February 11 to June 30, 2003. The MM5 model periodically ran every 10 days in 3 km × 3 km grid resolution with an integral time step of 3 s. In the MM5 model, many scheme or options are consulted or adopted, such as the Grell scheme cumulus parameterization method, the Dudhia option, the cloud-radiation scheme, MRF PBL option and the modified Oregon State University Land-surface model (OSULSM). According to the projection transform methods, the MM5 outputs are interpolated to the 1 km × 1 km grid in Alberts projection by using triangle-based cubic interpolation (Cubic) and nearest neighbor interpolation (Nearest) methods, with which the DWHC model shares the same method. The result shows that, when the Nearest method is used, the Nash-Sutcliffe equation value of the daily average runoff is 0.79, the balance error is −0.79% and the goodness of fit R ² value is 0.81. Meanwhile, when the Cubic method is used, the Nash-Sutcliffe equation value, the balance error and the R ² value are 0.79, −0.65% and 0.80, respectively. Though the runoff simulation result is not favorable, it is still better than that using measured data at the meteorological and hydrological stations; the latter has a Nash-Sutcliffe equation value of 0.61. The MM5-DWHC model results also show that runoff mainly occurs on land surfaces and from shallow soil layers. According to model calibration results, certain outputs of MM5 are singular to some extent and the DWHC model is very sensitive to the initial values.     

超强台风Saomai(0608)加强成因分析及 海温影响的数值试验研究*

以严重影响我国的2006年8号超强台风Saomai为研究对象,首先从大尺度环流特征和物理量场对其登陆前强度不断加强成因作诊断分析,指出台风加强与副高的加强和南落、低空持续加强的水汽输送、高空流出气流的强辐散、台风移向垂直切变小值区和暖洋面密切相关。然后,利用中尺度数值模式MM5分析了海温高低对台风强度变化的影响,试验结果表明台风强度对海温十分敏感,海温改变可以引起台风强度的迅速变化,海温降低2℃将使台风最终减弱19hPa。边界层通量的分析表明,海温变化对台风强度的影响中潜热通量的作用是主要的,而感热输送的作用较小。就海温变化是否引起诸多台风强度影响因子分析发现,高海温使台风区域低空气旋式环流和高层辐散流出加强,导致低空更多的水汽向该区辐合,暖海面上空潮湿空气的辐合上升释放大量的凝结潜热为台风的发展加强提供了更多的水汽和能量。对比试验还表明,正位涡向下输送预示着台风将快速加强。另外,本次试验中海温变化对台风移动路径影响不明显, 因而对环境风的垂直切变影响较小。     

区域中尺度模式云微物理参数化方案特征及其在中国的适用性

云微物理参数化方案在数值模式中起着重要的作用,是影响数值天气预报和气候预测准确性的最大因素。系统回顾了中尺度数值模式中云微物理参数化方案的研究进展,并统计分析了最近十余年云微物理参数化方案在中国范围内的敏感性试验研究成果。Lin方案和Rutledge-Hobbs方案奠定了中尺度模式中云微物理参数化方案的基础,其他方案都是直接或间接在这2个方案的基础上从多方面改进而形成的。这些改进主要体现在:①水凝物粒子分类数目;②冰核活化;③粒子谱分布描述函数;④粒子谱截距的取值;⑤粒子间相互转换阈值大小的设定。中国范围内云微物理参数化方案敏感性试验研究成果统计表明,使用WRF模式中Lin方案的模拟效果较好,MM5模式采用Goddard和Reisner方案效果较好。