Application of MASW in road failure investigation

Multichannel analysis of surface waves (MASW) survey was conducted to measure shear wave velocities in order to ascertain the likely causes of road failure along LASU-IBA expressway in Alimosho local government area, Lagos, Nigeria. MASW data were acquired along the express road. The acquired dataset was processed and transformed into two-dimensional structure reflective of depth and surface wave velocity distribution within a depth of investigation using SurfSeis software. The MASW shear wave velocity data were compared to geophysical data that was acquired along the same profile. The comparison was also done with geotechnical data that had been acquired prior to the study some meters away from the study area. The correlation between N values to measured shear wave velocity using MASW was generated. The comparison illustrates the accuracy and consistency of MASW-derived shear wave velocity profiles. We concluded that (1) the low-velocity region that varies between 100 and 250 m/s at surface down to 4 m beneath the surface is characterized by loose/peat materials and may have been responsible for the road failure within the study area; this region depicts a very loose compaction area. (2) The MASW technique is a time–cost-effective tool for obtaining reliable shear wave velocity profiles, and (3) the MASW is particularly attractive in areas that cannot be readily assessed by other geophysical and geotechnical tools.     

Multichannel analysis of surface waves (MASW) for seismic site characterization using 2D genetic algorithm at Bahrah area,Wadi Fatima,Saudi Arabia

The present study deals with the seismic site classification of Bahrah area, Wadi Fatima, to characterize the local site conditions. The dynamic behavior of sediments was studied by the application of surface wave inversion. The multichannel analysis of surface waves (MASW) shallow geophysical technique was utilized for site classification. MASW survey was carried out at 66 sites along with 13 seismic refraction profiles at suitable localities. MASW and seismic refraction profiles were processed and compared with the available borehole data. The integration of MASW techniques with seismic refraction and borehole data progressively enhanced the subsurface visualization and reliability of the shear wave velocity estimation in the subsurface in the study area. The subsurface shear-wave velocity model was achieved by the solution of an inverse problem-based dispersion of surface waves and propagation in a vertically heterogeneous medium. The 2D genetic algorithm was employed for the inversion of dispersion curves to obtain velocity and thickness of subsurface layers. The depth to engineering bedrock and velocity of shear waves in the first 30 m was deciphered and mapped. The depth of bedrock in study area varies from 4 to 30 m, and V _{S 30} ranges from 320 to 800 m/s. The most of study area falls in B and C class categories in addition to few sites of D class according to the NEHRP guidelines.     

Geophysical surveys to study a landslide body (north-eastern Sicily)

Almost the entire Italian territory is prone to hydrogeological risk mostly due to landslides and flooding. The high frequency of extreme weather events in areas prone to geological–hydraulic hazards contributes significantly to increasing the risk for cities and its infrastructure, but above all for the people living there. Therefore, it is vital to research into rapid monitoring techniques to be applied following a disaster such as a landslide, so that important background information, useful for planning interventions aimed at hazard mitigation, can be obtained. This work seeks to identify the depth of the sliding surface of a landslide affecting the municipal area of Tripi (village in the Messina province, Sicily), through two geophysical field surveys (MASW and HVSR) undertaken in the same area at an interval of about 5 years. The MASW surveys have enabled to reconstruct the distribution of shear wave velocity with depth. The HVSR surveys have provided information on resonant frequency and directional effects. The data integration obtained by the two methods allowed to reconstruct impedance contrast sections indicating the depth of the sliding surface of the landslide.

     

Combined ground-penetrating radar (GPR) and electrical resistivity applications exploring groundwater potential zones in granitic terrain

Frequent failures of monsoons have forced to opt the groundwater as the only source of irrigation in non-command areas. Groundwater exploration in granitic terrain of dry land agriculture has been a major concern for farmers and water resource authorities. The hydrogeological complexities and lack of understanding of the aquifer systems have resulted in the failure of a majority of the borehole drillings in India. Hence, a combination of geophysical tools comprising ground-penetrating radar (GPR), multielectrode resistivity imaging (MERI), and vertical electrical sounding (VES) has been employed for pinpointing the groundwater potential zones in dry land agricultural of granitic terrain in India. Results obtained and verified with each other led to the detection of a saturated fracture within the environs. In GPR scanning, a 40-MHz antenna is used with specifications of 5 dielectric constant, 600 scans/nS, and 40 m depth. The anomalies acquired on GPR scans at various depths are confirmed with low-resistivity ranges of 27–50?Ω m at 23 and 27 m depths obtained from the MERI. Further, drilling with a down-the-hole hammer was carried out at two recommended sites down to 50–70 m depth, which were complimentary of VES results. The integrated geophysical anomalies have good agreement with the drilling lithologs validating the MERI and GPR data. The yields of these bore wells varied from 83 to 130 l/min. This approach is possible and can be replicated by water resource authorities in thrust areas of dry land environs of hard rock terrain around the world.     

Archaeological exploration using magnetic and GPR methods at the first court of Hatshepsut Temple in Luxor, Egypt

The Hatshepsut Temple at Luxor, southern Egypt was built as a garden for Amun, and the first court indeed had exotic trees and vegetations. The pathway to the temple was along a sphinx-lined causeway linking the valley to pylons, which are missing now. As an effort to outline remains of the vanished garden and missing pylons and any other possible archaeological structures at this first court site, an extensive integrated magnetic/ground-penetrating radar (GPR) geophysical survey was conducted. The magnetic survey covered the entire area of the first court (100?×?60 m), while the GPR survey covered only an area of 50?×?50 m. The acquired GPR data were processed and presented as 2-D depth sections providing a reasonable vertical/horizontal resolution for the upper 6 m of the investigated site. The acquired magnetic data was processed and presented as 2-D image. The integrated interpretation of the acquired GPR and magnetic data revealed some archaeological features including a rectangular depression which is presumably an ancient man-made pond in the garden of the temple, a rectangular feature that may be a foundation of the missing pylon of the temple, and a suite of aligned anomalies that could be the remnants of sphinx. Such findings reflect the archaeological potentiality of the surveyed site and outline the extension of the temple. Meanwhile, these results necessitate further geophysical investigation or archaeological excavation to be confirmed.     

Geophysical surveys to study a landslide body (north-eastern Sicily)

Almost the entire Italian territory is prone to hydrogeological risk mostly due to landslides and flooding. The high frequency of extreme weather events in areas prone to geological–hydraulic hazards contributes significantly to increasing the risk for cities and its infrastructure, but above all for the people living there. Therefore, it is vital to research into rapid monitoring techniques to be applied following a disaster such as a landslide, so that important background information, useful for planning interventions aimed at hazard mitigation, can be obtained. This work seeks to identify the depth of the sliding surface of a landslide affecting the municipal area of Tripi (village in the Messina province, Sicily), through two geophysical field surveys (MASW and HVSR) undertaken in the same area at an interval of about 5 years. The MASW surveys have enabled to reconstruct the distribution of shear wave velocity with depth. The HVSR surveys have provided information on resonant frequency and directional effects. The data integration obtained by the two methods allowed to reconstruct impedance contrast sections indicating the depth of the sliding surface of the landslide.     

Imaging fracture distributions of the Al-Khuff Formation outcrops using GPR and ERT geophysical techniques,Al-Qassim area,Saudi Arabia

Khuff Formation is of utmost importance in Saudi Arabia for oil and gas reservoir although it is composed mainly of limestone. This reason refers to the existence of intensive fractures which play a vital role in the increase in porosity and permeability of this formation. The fracture pattern in the study area was verified through 2D and 3D ground penetrating radar (GPR)-defined and electrical resistivity tomography (ERT)-defined surveys. In this respect, ten of 2D GPR surveys were collected along an intersected grid of profiles covering the study area while ERT data were collected along three profiles of the GPR grid. The results were interpreted in light of the field-based structural and stratigraphic assessment of the outcropping rocks. The analysis of the inverted ERT and filtered GPR sections revealed the presence of fractures. Several resistivity and electromagnetic reflection anomalies were laterally and vertically identified across the measured sections clarifying fractures that extend to a depth of 24 m in the limestone. Most fractures are oriented vertical to sub-vertical dipping both east-west and north-south.     

Estimation of shearwave velocity in drifts using multichannel analysis of surface wave (MASW) technique — A case study from Jammu & Kashmir,India

Multichannel analysis of surface waves (MASW) is a non-destructive seismic prospecting method utilizing Rayleigh waves for imaging and characterizing shallow sub-surface structure. Multichannel analysis of surface waves (MASW) studies were conducted in drift areas of two bridge sites in the hilly terrain of J&K for imaging and characterizing shallow sub-surface structure. The purpose of the present study is to estimate the shear wave velocity (V_S) and subsurface structure in four drifts made in a hilly terrain for construction of two bridges. Rayleigh waves are having dispersive properties, travelling along or near the ground surface and are usually characterized by relatively low velocity, low frequency, and high amplitude. The study area comprises of Tertiary group of rocks which are underlain by Siwalik group. The main rock type in the study area is dolomite which has undergone various geological processes like weathering, jointing, fracturing and shearing. MASW data was collected inside four drifts in the mountainous terrain of J&K state which are located on either sides of Chenab river. The data was analyzed by relevant processing software using dispersion and inversion technique. Shear wave velocities were estimated up to 30 m depth. Average shear wave velocity (V_S ³⁰) up to top 30m was also computed. It is observed that, V_S in the range 400–800 m/s upto 10–15 m corresponding to weathered rock, followed by compact dolomite rock up to the depth of about 30 m with V_S in the range 1200–1600 m/s. Some low velocity zones are also identified from these sections which represent shear zones.     

Geophysical response of slackwater and sandy terrace deposits near Savanna, Northwestern Illinois

Low-permeability clayey and silty river terrace deposits are an important component in protecting underlying aquifers from contamination by agrochemicals and other contaminants. Such deposits also record deglaciation dynamics, meltwater drainage and local climatic variations. In this study, conducted over Mississippi River terraces near Savanna, Illinois, clayey slackwater terrace deposits and sandy terrace deposits are examined using resistivity soundings, ground-penetrating radar (GPR) profiles and direct-push conductivity logs. The clayey terrace deposits are characterized by low resistivity (10–35 ohm-m) and slow GPR wave velocity (0.07 m/ns), whereas non-clayey terrace deposits exhibit much higher resistivity (169–1,762 ohm-m) and faster GPR wave velocities (0.15 m/ns). Sandy and clayey terrace deposits may thus be differentiated and mapped on the basis of their geophysical response. Models based on resistivity soundings provide reasonably accurate estimates of the thickness of clayey slackwater deposits, but fail to reveal thin sands embedded in the clayey deposits. In some cases, the full thickness of the slackwater deposits was also not revealed. GPR profiles, however, imaged these embedded shallow sands and possibly imaged deeper sands below the base of the slackwater deposits, giving more accurate estimates of thickness. GPR also accurately resolved the thickness and character of sandy terrace deposits. Direct-push conductivity logs provide both accurate estimates of the thickness of clayey slackwater terrace deposits and a means of identifying thin embedded sands. In summary, resistivity soundings image these deposits at the lowest resolution with one-dimensional models, whereas GPR provides much higher resolution showing detailed layering within the upper several meters. Direct-push conductivity logs provide the highest resolution, but are invasive and only reveal stratigraphy at one location.     

Geotechnical assessment of ground conditions around a tilted building in Cairo, Egypt using geophysical approaches

The flood plain of the Nile River has been a safe dwelling throughout history. Recently with a growing population and vast growing urbanization, some buildings have started to experience structural damages, which are not related to their construction design, but rather to the ground conditions around the buildings' foundations. Variations in properties of the soil supporting the buildings' foundations such as soil-bearing capacity, moisture content, and scouring may eventually lead to the failure of these buildings. This study is attempting to characterize the variations in the soil properties around the City Star shopping mall, in eastern Cairo, where a large building has tilted over the past few years. This tilting may lead to the collapse of the whole building if it continues at the same rate. An integrated geophysical investigation including multi-channel analysis of surface wave (MASW), ground-penetrating radar (GPR), and 2-D electrical resistivity tomography (ERT) was used around the affected building to help detect possible causes of deterioration. The GPR data showed a soil-filled layer overlaying a thick bottom layer of higher moisture content. The MASW data revealed a middle layer of relatively low shear wave velocity sandwiched between two relatively high shear wave velocity layers. The ERT data showed an upper low resistivity layer overlying a high resistivity layer. Integrating the interpretations of the three geophysical methods provides a combined model that reflects lateral and vertical variation in the soil properties. This variation becomes dramatic near the tilted corner of the building.     

地球物理探测技术在成都市浅表地质结构调查中的应用研究

【研究目的】 查明城市浅表地质结构特征,对于城市地下空间规划、开发区建设、地质灾害评价等有着重要的指导意义,而无损、抗干扰能力强的地球物理探测技术在提供城市地区地下地质信息方面可以发挥关键作用。【研究方法】 为了支撑成都市浅表的三维地质填图工作,本文应用11种新、老地球物理探测技术,开展了成都市浅表地质结构的探测研究。【研究结果】 研究结果表明：（1）地质雷达对于近地表的地层结构成像、建筑结构识别分辨率较高;（2）瞬态面波、混合源面波、三分量频率谐振法对50 m以浅的地质结构识别能力强,分辨率很高,但探测深度有限;（3）微动勘探法和高密度电阻率法对50 m以浅的地质结构分辨率较高,但深部分辨率一般;（4）等值反磁通瞬变电磁抗干扰能力强,施工效率高,50 m以浅分辨率较高,50~200 m深度范围内分辨率一般,对膏岩泥岩有较好的识别能力;（5）半航空瞬变电磁可弥补了常规物探方法无法进入特殊场地施工的不足;（6）浅层地震勘探对于浅地表50～300 m深度范围内的砂泥岩互层的变化特征和断层结构特征效果较好,配合自然伽马曲线,可有效识别砂泥岩的岩性界面;（7）音频大地电磁可有效识别成都平原深大断裂的空间分布形态。【结论】 综合各种地球物理方法的优缺点,建立了成都市浅表地质结构的地球物理组合探测技术方案,以期能为今后的城市浅表地质结构调查提供参考。     

蒙特卡洛方法在地质雷达探测地下管道中的应用

地质雷达是一种探测金属和非金属管道的有效方法,传统方法是利用经验电磁波速度计算管道埋深,存在较大误差,且往往无法估算管径或算法繁琐。蒙特卡洛方法是一种随机模拟的地球物理反演手段,从雷达图像中读取一系列反射回波穿行时间和雷达相对于管顶的位置数据,给定合理的电磁波速度、管道埋深和管径3个参数的范围,可以有效地拟合得到速度、埋深和管径。该方法在南京地铁盾构某区段,用来拟合估算地下输油管、自来水管和污水管的埋深及管径,取得了与实际情况较为一致的结果,拟合的电磁波速度符合地下介质情况。     

Surface wave studies for shear wave velocity and bedrock depth estimation over basalts

Shear wave velocity (V _S) estimation is of paramount importance in earthquake hazard assessment and other geotechnical/geo engineering studies. In our study, the shear wave velocity was estimated from ground roll using multichannel analysis of surface wave (MASW) technique making use of dispersive characteristics of Rayleigh type surface waves followed by imaging the shallow subsurface basaltic layers in an earthquake-prone region near Jabalpur, India. The reliability of MASW depends on the accurate determination of phase velocities for horizontally traveling fundamental mode Rayleigh waves. Inversion of data from surface waves resulted in a shear wave velocity (V _S) in the range of 200–1,200 m/s covering the top soil to weathering and up to bedrock corresponding to a depth of 10–30 m. The P-wave velocity (V _P) obtained from refraction seismic studies at these locations found to be comparable with V _S at an assumed specific Poisson’s ratio. A pair of selected set of V _S profiles over basalt which did not result in a hazardous situation in an earthquake of moderate magnitude are presented here as a case study; in other words, the shear wave velocity range of more than 200 m/s indicate that the area is highly unlikely prone to liquefaction during a moderate or strong earthquake. The estimated depth to basalt is found to be 10–12 m in both the cases which is also supported by refraction studies.     

Subsurface characterization using seismic refraction and surface wave methods: a case of Lagos State University, Ojo, Lagos State

This study contains the finding of geophysical investigations conducted at the proposed science complex site at Lagos State University, Ojo, Lagos, Nigeria. Surface wave and seismic refraction tests are non-invasive seismic techniques and have been used to determine the shear wave velocity profile of soil deposits. The methods provide a simplified characterization of subsurface in two-dimensional (2D) (distance and depth) profiles. Seismic records obtained were processed/analyzed by Seis-Imager software to obtain one-dimensional shear wave velocity (Vs) distribution. Multiple Vs obtained were integrated and used to construct two-dimensional Vs map. The measured P- and S-wave velocities were also used to estimate Poisson’s ratio, rigidity modulus, and N-values. The study had shown that the area investigated composed mainly of loose sediments (clay formation) to the depth of 12 m with P-wave velocity ranging between 125 and 205 m/s and corresponding S-wave velocity between 60 and 100 m/s. The results presented in this study will be vital information for the engineers in construction of the proposed science complex.     

Determination of shear wave velocity and depth to basement using multichannel analysis of surface wave technique

The dispersive characteristics of Rayleigh type surface waves were utilized to estimate shear wave velocity (Vs) profile followed by imaging the shallow subsurface granitic layers in the heart of Hyderabad. The reliability of Multichannel Analysis of Surface Waves (MASW) depends on the accurate determination of phase velocities for horizontally traveling fundamental mode Rayleigh waves. Multichannel recording leads to effective identification and isolation of various factors of noise. Calculating the 1-D shear wave velocity (Vs) field from surface waves ensures high degree of accuracy irrespective of cultural noise. The main advantage of mapping the bed rock surface with shear wave velocity (Vs) is the insensitivity of MASW to velocity inversion besides being free from many constraints such as contrast in physical properties etc. Modeling of surface waves data results a shear wave velocity (Vs) of 250?C750 m/s covering the top soil to weathering and up to bedrock corresponding to a depth range of 10?C30 m. Further, the computed N values (which is an indicator of site characteristic) based on the harmonic shear wave velocity up to a depth of 5 m is found to be quite high (> 25?C30) well above 5 indicating the site to be safe and strong enough and not prone to liquefaction. A pair of selected set of results over granites are presented here as a case study highlighting the salient features of MASW.     

Research of reservoir watershed fine zoning and flood forecasting method

In the present study, a set of correlation relations between standard penetrations tests (SPT-N values) and shear wave velocity (Vs) for different categories of soils is developed for Dholera region, Gujarat state, Western India. Shear wave velocities were measured using multichannel analysis of surface wave (MASW at 42 sites) and by PS logging (at 16 sites). SPT-N values were taken in total 87 geotechnical boreholes at depth interval of 3 m. Seismic site classification is done as per National Earthquake Hazards Reduction Program of the USA. Total 336 pairs of SPT-N values and Vs data at different depths are used to develop the regression correlation between uncorrected SPT-N value and Vs and compared with the results of other workers from India and worldwide for all soils type. It is found that regression correlations developed for clay and all soils are almost similar to each other, for sand, the coefficient value is less and for silt, it is higher. The new regression equation gives good prediction performance. The present correlation can be used for the seismic hazard study for the study area and also for the other areas having similar soil strata using a process of validation.     

Rainfall-induced landslide in the active frontal fold–thrust belt of Northwestern Himalaya,Jammu: dynamics inferred by geological evidences and Ground Penetrating Radar

Landslides are the most established geological hazards in the frontal fold–thrust belt of Northwestern Himalaya comprising of Siwaliks and Murree strata. The continuous rainfall from 2 to 6 September, 2014 caused a massive landslide at village Sadal in Udhampur district of Jammu and Kashmir state. The landslide occurred in the early morning of September 6, 2014, destroying entire Sadal habitation comprising 45 houses, and killing 41 people and more than 500 domestic animals. Google earth images of pre and post-landslide events along with the field measurements show the kinematics of upper and lower parts of the slide. Horizontal and vertical components of displacement and mode of failure suggest the landslide as of complex nature. The shallow subsurface geophysical imaging through Ground Penetrating Radar (GPR) survey shows the failure plane composed of friable mudstone bed underlain by massive mudstone and overlain by cross-bedded sandstone. The depth of debris material above the failure plane ranges from 6 m at Site S1a-b to 10 m at Site-S2b and 20 m at Site S3a. The velocity analysis of Site-3 shows four thick layers represented from bottom to surface by L1—sandstone (V?=?0.16 m/ns, travel time?=?356.36 ns), L2—mudstone (V?=?0.17 m/ns, travel time?=?288.48 ns), L3—massive mudstone (V?=?0.19 m/ns, travel time 220.68 ns), and L4—cross-laminated sandstone (V?=?0.20 m/ns, travel time?=?77.58 ns) overlaying the failure plane. The study shows the landslide occur along the western limb of a fold identified during the present work. We mapped an old landslide on the same limb which shows 5–6 m-thick subsurface debris material with thick rock fragments involved in the landslide process. The detailed geological and geophysical investigations suggest that both the landslides were triggered by extreme rain fall events.     

Détection de carrières souterraines par sismique haute résolution à Annet-sur-Marne (France)Underground cavities detection by using high resolution seismics at Annet-sur-Marne (France)

Seismic methods were tested to detect underground cavities in the surroundings of Annet-sur-Marne (Seine-et-Marne, France). Cavities are located in three Ludian gypsum layers, between 30 and 80 m in depth. A high resolution seismic profile 450 m long was carried out so that the first third and the other part are respectively above non-exploited and exploited areas. Data processing highlights a series of reflections related to the marl–gypsum interfaces in the non-exploited area, while these reflections disappear in the exploited area. With the help of numerical simulations, this feature is interpreted as a disorganisation of wave fronts reflected on interfaces because of the presence of cavities. To cite this article: G. Grandjean et al., C. R. Geoscience 334 (2002) 441–447.     

Investigation of the relationship between ground and engineering bedrock at northern part of the Gulf of İzmir by borehole data supported geophysical works

Loss of life and property that may occur as a result of a possible earthquake can be reduced by earthquake resistant building designs. In order to investigate possible ground motion amplification in earthquake resistant building design, relationship between the ground and engineering bedrock must be ensured. In order to provide this relation, structure, basic characteristics, and thickness of the ground are investigated. In this context, calculating ground transfer function, obtaining horizontal earthquake acceleration changes, calculating Vs values and defining the engineering bedrock are necessary. In this study, Menemen plain, the nothern part of Izmir metropolitan located in active earthquake zone and its immediate vicinity have been examined to define the structure, ground, engineering and bedrock relation. In this context, Menemen plain has been investigated by geophysical methods, which are supported with borehole data (microtremor, MASW – multichannel analysis of surface waves, microgravity measurements, and vertical electrical sounding–VES). Microtremor method was conducted at 377 points in average in the investigation area to define fundamental period and empirical transfer function; after that in order to create basin model and to define the shallow subsurface geometry, microgravity measurements were carried out by using Scintrex CG-5. Also, MASW measurements were carried out in approximately 277 profiles and Schlumberger VES measurements were conducted at approximately 7 points in the investigation area. The existence of a linear relation between H/V peak period values obtained by microtremor measurements and ground thickness in the investigation area is also supported by geothermal drilling logs (depth of 600 m) with microgravity survey. Also, in some parts of the investigation area, it was observed that high S velocity (Vs) values affected H/V peak period values in sections of the ground close to the surface and there was an inversely correlated relation between this ground thickness and peak period values. This event occurring in shallow depths is supported by both VES sections and 2nd order vertical gravity derivative. As a result, depth of the engineering bedrock was obtained between 200 and 700 m and this unit was proposed as Bornova Melange for the investigation area in the scope of the works carried out. Also, it is observed that the area from ground to the engineering bedrock consists of four different layers which were defined by individual S velocities and densities. According to all results, characterictics of the shallow subsurface show that there is a high heterogeneity. Therefore, according to Eurocode8 (EC8 2004) regulations, soil characteristic of the Menemen plain and its vicinity are in the S1–S2 soil class.     

TSP探测精度分析及其在过江隧洞超前预报中的应用

针对TSP预报工作耗时长、经验依赖性强等问题,以提高TSP探测精度与效率为目标,分析了影响TSP数据采集与处理精度的关键因素,总结了提高TSP探测效率的经验。结合千岛湖配水工程某过江隧洞段地质超前预报工程,在TSP探测分辨率下降的区域开展TSP跟踪预报或地质雷达探测工作,对物探异常区辅以钻探验证。结果表明:岩体完整性差地段的TSP纵波波速、密度及各力学模量值偏低,TSP对破碎带探测较敏感,对基岩裂隙水识别能力相对较弱,纵、横波波速均偏低的区域岩体富水的概率更大;岩体破碎含水区段雷达电磁异常特征表现为反射波振幅强,同相轴错断,主频偏低。综合预报成果发挥了各种预报方法优势互补的作用,为隧洞支护及超前注浆方案的优化提供了重要参考。