Bedforms: views and new perspectives from the third international workshop on Marine and River Dune Dynamics (MARID3)

This Commentary introduces a Special Issue of Earth Surface Processes and Landforms dedicated to the memory of Stephen Coleman (1966–2012) who sadly passed away on July 23, 2012. Stephen was an incredible enthusiast for the study of bedforms and made seminal contributions to our knowledge and understanding of flow, sediment transport and bedform dynamics. Stephen presented a keynote address at MARID 3, which has led to this Special Issue (see Coleman SE, Nikora VI. 2011. Fluvial dunes: initiation, characterization, flow structure. Earth Surface Processes and Landforms 36 : 39–57. DOI. 10.1002/esp.2096) and was always keen to discuss research, from theory to techniques to experiments. He was always generous with his time and touched many with the influence of his thoughts and intellect. Our community has lost an outstanding scientist and Stephen will be greatly missed by us all. Copyright © 2012 John Wiley & Sons, Ltd.     

Runoff and sediment generation on bench‐terraced hillsides: measurements and up‐scaling of a field‐based model

Despite widespread bench‐terracing, stream sediment yields from agricultural hillsides in upland West Java remain high. We studied the causes of this lack of effect by combining measurements at different spatial scales using an erosion process model. Event runoff and sediment yield from two 4‐ha terraced hillside subcatchments were measured and field surveys of land use, bench‐terrace geometry and storage of sediment in the drainage network were conducted for two consecutive years. Runoff was 3·0–3·9% of rainfall and sediment yield was 11–30 t ha⁻¹ yr⁻¹ for different years, subcatchments and calculation techniques. Sediment storage changes in the subcatchment drainage network were less than 2 t ha⁻¹, whereas an additional 0·3–1·5 t ha⁻¹ was stored in the gully between the subcatchment flumes and the main stream. This suggests mean annual sediment delivery ratios of 86–125%, or 80–104% if this additional storage is included. The Terrace Erosion and Sediment Transport (TEST) model developed and validated for the studied environment was parameterized using erosion plot studies, land use surveys and digital terrain analysis to simulate runoff and sediment generation on the terraced hillsides. This resulted in over‐estimates of runoff and under‐estimates of runoff sediment concentration. Relatively poor model performance was attributed to sample bias in the six erosion plots used for model calibration and unaccounted covariance between important terrain attributes such as slope, infiltration capacity, soil conservation works and vegetation cover. Copyright © 2005 John Wiley & Sons, Ltd.     

The nahal yatir bedload database: Sediment dynamics in a gravel-bed ephemeral stream

The Nahal Yatir Bedload Transport Database arises from the Northern Negev River Sediment Monitoring Programme and represents the first body of bedload information to be collected during flash floods in desert gravel-bed streams. Bedload flux was established automatically with three slot-samplers of the Birkbeck type. This was complemented by hydraulic measurements that allow sediment transport to be rated against channel average shear stress and specific stream power. Bed material and bedload grain-size distributions are also provided. The database is given in both printed and electronic tabular format.     

Potential of weight of evidence modelling for gully erosion hazard assessment in Mbire District – Zimbabwe

Gully erosion is an environmental concern particularly in areas where landcover has been modified by human activities. This study assessed the extent to which the potential of gully erosion could be successfully modelled as a function of seven environmental factors (landcover, soil type, distance from river, distance from road, Sediment Transport Index (STI), Stream Power Index (SPI) and Wetness Index (WI)) using a GIS-based Weight of Evidence Modelling (WEM) in the Mbire District of Zimbabwe. Results show that out of the studied seven factors affecting gully erosion, five were significantly correlated (p < 0.05) to gully occurrence, namely; landcover, soil type, distance from river, STI and SPI. Two factors; WI and distance from road were not significantly correlated to gully occurrence (p > 0.05). A gully erosion hazard map showed that 78% of the very high hazard class area is within a distance of 250 m from rivers. Model validation indicated that 70% of the validation set of gullies were in the high hazard and very high hazard class. The resulting map of areas susceptible to gully erosion has a prediction accuracy of 67.8%. The predictive capability of the weight of evidence model in this study suggests that landcover, soil type, distance from river, STI and SPI are useful in creating a gully erosion hazard map but may not be sufficient to produce a valid map of gully erosion hazard.     

Storm event sediment fingerprinting for temporal and spatial sediment source tracing

Sediment fingerprinting has been widely used to distinguish discrete sediment sources; however, application to intra-storm sediment source variability has received relatively little focus despite the benefit being long recognized. In this investigation, sediment fingerprinting was applied to a 53-hr storm event sampled hourly to determine sediment source dynamics throughout the event. Sediment sources were differentiated using 16 variables, and source contribution determined using Bayesian and Frequentist mixing models for comparison. Both models provided comparable source predictions for the dominant source estimates and the general temporal pattern. The Frequentist model appeared to exhibit some unreliable values coinciding with low GOF and attributed to inherent model structure. The Bayesian model showed higher uncertainty, likely due to the “process error” utilized associated with single sample mixtures. High variability in sediment source contribution was observed between hourly time steps; however, local smoothing reveals temporal trends during the event. A higher average proportion of mudstone is found in the falling limb (0.544) compared with the rising limb (0.464), and the reverse is observed for mountain range (0.218 vs. 0.283) and unconsolidated (0.073 vs. 0.055). In the initial hours of the storm, mudstone source contribution significantly drops, whereas mountain range and unconsolidated contributions peak. The SSC-Q clockwise hysteresis indicates proximal sediment sources, suggesting the mudstone sediment is stored channel sediment and easily entrained. This sediment flushes through, coinciding with a drop as the distal mountain range and unconsolidated sources arrive to peak contribution. The wider Manawatū discharge and sediment load then arrive, delivering increasing levels of mudstone throughout the remainder of the event while mountain range sediment diminishes. Spatial representation of the sediment source contribution was derived from distributing sediment source loads to the spatial extent of the source material according to sub-catchment sediment loads and was weighted according to slope. This provided an effective means to visualize the origin of the sediment and a better spatial interpretation of sediment fingerprinting results, which is typically limited by poor spatial resolution.     

Temporal variability of suspended sediment sources in an alpine catchment combining river/rainfall monitoring and sediment fingerprinting

Influence of the rainfall regime on erosion and transfer of suspended sediment in a 905‐km² mountainous catchment of the southern French Alps was investigated by combining sediment monitoring, rainfall data, and sediment fingerprinting (based on geochemistry and radionuclide concentrations). Suspended sediment yields were monitored between October 2007 and December 2009 in four subcatchments (22–713 km²). Automatic sediment sampling was triggered during floods to trace the sediment origin in the catchment. Sediment exports at the river catchment outlet (330 ± 100 t km^‐2 yr^‐1) were mainly driven (80%) by widespread rainfall events (long duration, low intensities). In contrast, heavy, local and short duration storms, generated high peak discharges and suspended sediment concentrations in small upstream torrents. However, these upstream floods had generally not the capacity to transfer the sediment down to the catchment outlet and the bulk of this fine sediment deposited along downstream sections of the river. This study also confirmed the important contribution of black marls (up to 70%) to sediment transported in rivers, although this substrate only occupies c. 10% of the total catchment surface. Sediment exports generated by local convective storms varied significantly at both intra‐ and inter‐flood scales, because of spatial heterogeneity of rainfall. However, black marls/marly limestones contribution remained systematically high. In contrast, widespread flood events that generate the bulk of annual sediment supply at the outlet were characterized by a more stable lithologic composition and by a larger contribution of limestones/marls, Quaternary deposits and conglomerates, which corroborates the results of a previous sediment fingerprinting study conducted on riverbed sediment. Copyright © 2012 John Wiley & Sons, Ltd.     

Use of ciliates (Protozoa: Ciliophora) as bioindicator to assess sediment quality of two constructed mangrove sewage treatment belts in Southern China

To complement physical and chemical data, information of biological communities is important to assess the qualities of mangrove sediments receiving wastewater. Ciliate communities have cosmopolitan distribution, short life cycle and high sensitivity to pollutants, which make them useful as biological indicators of the sediment environment. In most literature, ciliates are widely used as bioindicators for the state of water quality. In this study, the physico-chemical parameters and ciliate community structure of surface sediment collected at different sampling points from two constructed mangrove (Aegiceras and Sonneratia) belts for treatment of municipal sewage in southern China were investigated. Results showed that most (> 80%) of the 216 species ciliates identified at the two constructed mangrove belts were either omnivorous or bacterivorous. Sediment redox potential (Eh) was considered an important factor to govern the distribution of ciliate species within the mangrove sediment. The saprobic system originally derived from freshwater ecosystem was used to evaluate the saprobic degrees of these constructed mangrove belts. Saprobic index (SI) values declined from the sewage inlet to the outlet points of the constructed belts, suggesting better sediment quality at the outlet point caused by treatment processes within the mangrove belt system. Sediment quality of the sewage outlet area of the constructed Aegiceras belt was determined as class II-III (SI = 2.48), while that of the Sonneratia belt was as class III (SI = 2.71) according to the saprobic classification, indicating that a better sewage treatment efficiency was apparent in the Aegiceras than Sonneratia belt. The present data suggested that ciliates could serve as a good bioindicator in assessing organically polluted sediment qualities.     

Effects of sediment size on transport capacity of overland flow on steep slopes

Abstract

Sediment transport capacity is a key concept in determining rates of detachment and deposition in process-based erosion models, yet limited studies have been conducted on steep slopes. We investigated the effects of sediment size on transport capacity of overland flow in a flume. Unit flow discharge ranged from 0.66 to 5.26?×?10^-3 m² s^-1, and slope gradient varied from 8.7 to 42.3%. Five sediment size classes (median diameter, d ₅₀, of 0.10, 0.22, 0.41, 0.69 and 1.16 mm) were used. Sediment size was inversely related to transport capacity. The ratios of average transport capacity of the finest class to those of the 0.22, 0.41, 0.69 and 1.16 mm classes were 1.09, 1.30, 1.55 and 1.92, respectively. Sediment transport capacity increased as a power function of flow discharge and slope gradient (R²?=?0.98), shear stress (R²?=?0.95), stream power (R²?=?0.94), or unit stream power (R²?=?0.76). Transport capacity generally decreased as a power function of sediment size (exponent?=??0.35). Shear stress and stream power predicted transport capacity better than unit stream power on steep slopes when transport capacity was <7 kg m^-1 s^-1. Sediment transport capacity increased linearly with mean flow velocity. Critical or threshold velocity increased as a power function of sediment size (R²?=?0.93). Further studies with fine soil particles are needed to quantify the effects of sediment size on transport capacity of overland flow on steep slopes.

Citation Zhang, G.-H., Wang, L.-L., Tang, K.-M., Luo, R.-T. & Zhang, X.C. (2011) Effects of sediment size on transport capacity of overland flow on steep slopes. Hydrol. Sci. J. 56(7), 1289–1299.     

Drug-resistance transfer in Escherichia coli in New York Bight sediment

Sediment from the sewage sludge dump site area in the New York Bight contains bacteria resistant to antibiotics and heavy metals. The purpose of this study was to determine if antibiotic resistance could be transferred from donor to recipient Escherichia coli strains inoculated into glass vessels containing sediment and seawater obtained near the dump site. Temperature was maintained at 10°C, the mean winter temperature of benthic water at the dump site. Transconjugants (recipients which inherit donor genes for tetracycline resistance) were isolated from the seawater and sediment within one hour after inoculation and were found in all subsequent sediment samples for one month. Donor and recipient E. coli remained viable in the sediment for at least one month. Our results indicate that sewage sludge polluted sediment may serve as an environment conducive to conjugal transfer of antibiotic resistance genes.     

A RENEWED JOURNAL FOR A NOVEL ASSOCIATION

The International Journal of Sediment Research (edited, published and distributed by IRTCES) has, since a long time, been a valuable tool for circulating technical and scientific results in the field of erosion and sedimentation. With the present issue the Journal has become the official publication of WASER. What will this affiliation imply for the journal itself and for the readership ?     

A review of the LATEX project: mesoscale to submesoscale processes in a coastal environment

The main objective of the LAgrangian Transport EXperiment (LATEX) project was to study the influence of coastal mesoscale and submesoscale physical processes on circulation dynamics, cross-shelf exchanges, and biogeochemistry in the western continental shelf of the Gulf of Lion, Northwestern Mediterranean Sea. LATEX was a five-year multidisciplinary project based on the combined analysis of numerical model simulations and multi-platform field experiments. The model component included a ten-year realistic 3D numerical simulation, with a 1 km horizontal resolution over the gulf, nested in a coarser 3 km resolution model. The in situ component involved four cruises, including a large-scale multidisciplinary campaign with two research vessels in 2010. This review concentrates on the physics results of LATEX, addressing three main subjects: (1) the investigation of the mesoscale to submesoscale processes. The eddies are elliptic, baroclinic, and anticyclonic; the strong thermal and saline front is density compensated. Their generation processes are studied; (2) the development of sampling strategies for their direct observations. LATEX has implemented an adaptive strategy Lagrangian tool, with a reference software available on the web, to perform offshore campaigns in a Lagrangian framework; (3) the quantification of horizontal mixing and cross-shelf exchanges. Lateral diffusivity coefficients, calculated in various ways including a novel technique, are in the range classically encountered for their associated scales. Cross-shelf fluxes have been calculated, after retrieving the near-inertial oscillation contribution. Further perspectives are discussed, especially for the ongoing challenge of studying submesoscale features remotely and from in situ data.     

V. V. Beloussov and Geophysics: A Tribute on His 110th Birth Anniversary

The contribution made by V.V. Beloussov (1907–1990), an outstanding Earth scientist in the former Soviet Union and Russia, to the development of planetary geophysics is considered. Beloussov was a brilliant coordinator of international cooperation and direct inspirer of international scientific programs of paramount importance. He took up one of the key positions in organizing and holding the International Geophysical Year (IGY) in 1957–1958. In 1960, Beloussov was elected President of the International Union of Geodesy and Geophysics and proposed the project “The upper mantle and its influence on the Earth’s crust,” which subsequently became known worldwide as the Upper Mantle Project. The project underlined that the experience of the IGY should be extended to studies of the deep structure of the Earth and the processes taking place in the Earth’s interior. The fulfillment of this and the subsequent Geodynamic project resulted in a breakthrough in the knowledge about the deep structure of the Earth, particularly the structure of the oceans. Beloussov actively advocated integrating science of the Earth, geonomy, and in his scientific research sought a geonomic approach incorporating the entire complex of geological, geophysical, and geochemical data. Beloussov’s scientific heritage contains propositions that are of current importance and can be involved in modern developments of the Earth sciences.     

Impact of flood events on macrobenthic community structure on an intertidal flat developing in the Ohta River Estuary

We investigated the effects of river floods on the macrobenthic community of the intertidal flat in the Ohta River Estuary, Japan, from 2005 to 2010. Sediment erosion by flood events ranged from about 2–3 cm to 12 cm, and the salinity dropped to 0‰ even during low-intensity flood events. Cluster analysis of the macrobenthic population showed that the community structure was controlled by the physical disturbance, decreased salinity, or both. The opportunistic polychaete Capitella sp. was the most dominant species in all clusters, and populations of the long-lived polychaete Ceratonereis erythraeensis increased in years with stable flow and almost disappeared in years with intense flooding. The bivalve Musculista senhousia was also an important opportunistic species that formed mats in summer of the stable years and influenced the structure of the macrobenthic community. Our results demonstrate the substantial effects of flood events on the macrobenthic community structure.     

A biomonitoring study: Heavy metals in macroalgae from eastern Aegean coastal areas

The concentrations of metals were measured in macroalgae species seasonally at eight coastal stations along the eastern Aegean coast. Sediment and seawater samples were also collected to detect their metal contents in order to gain more information on the environmental conditions of the area and possible bioaccumulation patterns. The aim of this study is, to gather more information on the use of selected species as cosmopolitan biomonitors for the eastern Aegean; to provide information on the marine environmental quality by the use of macroalgae and to determine which algae species are suitable as biomonitoring species for the study area. The relative abundance of metals in macroalgae decreases in the order: Fe-Zn-Cu-Cr-Cd-Hg-Pb and seawater: Fe-Zn-Pb-Cu-Cr-Cd-Hg. In sediment the distribution order from higher to lower was Fe-Cr-Zn-Pb-Cu-Hg-Cd. The brown algae Cystoseira sp., the green algae Ulva sp. and Enteromorpha sp. possess high potential as cosmopolitan biomonitors for trace metals in the Aegean Sea.     

Alternative theory for signal contribution sections and depth of investigation characteristics in electrical prospecting

We present an alternative to Roy's theorem for direct current regimes with the aim of validating the theoretical basis of signal contribution sections in electrical prospecting. Roy's theorem establishes that the electrical potential at a point can be expressed as an integral over all space of the electric field weighted by the gradient of inverse distance. The integrand is interpreted to represent elementary contributions to the potential that can be analyzed to compare different electrode arrays. Signal contribution sections and depth of investigation characteristics can be beautifully illustrated with important practical applications. However, the electric potential, being the solution of a boundary value problem, cannot be uniquely decomposed into elementary contributions. There is no guarantee for the integrand of a given integral to be meaningful in all situations. In the case of Roy's theorem, the concept has been severely criticized by respected scholars who challenged the scientific legitimacy of his approach. If we are going to keep the concept of elementary contributions alive, we need to go beyond Roy's theorem. In this paper, we develop an alternative theorem and show that it merges with the concept of sensitivity, which is unique and mathematically sound, and is also open to physical validation. This prevents any possible contradictions in the future and, equally important, eliminates the dichotomy between sensitivity and elementary contributions.     

Benthic foraminifera as bio-indicators of chemical and physical stressors in Hammerfest harbor (Northern Norway)

We investigated benthic foraminiferal assemblages in contaminated sediments in a subarctic harbor of Northern Norway to assess their utility as indicators of anthropogenic impacts. Sediments in the harbor are repositories for POPs and heavy metals supplied through discharges from industry and shipping activities. Sediment contaminant concentrations are at moderate to poor ecological quality status (EcoQS) levels. The EcoQS based on benthic foraminiferal diversity reflects a similar trend to the EcoQS based on contaminant concentrations. Foraminiferal density and diversity is low throughout the harbor with distinct assemblages reflecting influence of physical disturbances or chemical stressors. Assemblages impacted by physical disturbance are dominated by L. lobatula and E. excavatum, while assemblages impacted by chemical stressors are dominated by opportunistic species S. fusiformis, S. biformis, B. spathulata and E. excavatum. The foraminiferal assemblage from an un-impacted nearby fjord consists mainly of agglutinated taxa. These assemblages provides a valuable baseline of the ecological impacts of industrialization in northern coastal communities.     

Delineation of heavy metal contamination pathways (seawater,food and sediment) in tropical oysters from New Caledonia using radiotracer techniques

Bioaccumulation of Ag, Cd, Co, Cr and Zn was studied in the oysters Isognomon isognomon and Malleus regula, using highly sensitive radiotracer techniques. Metals were readily bioconcentrated from the dissolved phase. Sediment exposures indicated a low bioavailability of sediment-bound metals (3–5 orders of magnitude lower than dissolved metals). In both seawater and sediment experiments, the two oysters displayed similar bioaccumulation behaviour towards all metals but Ag. Indeed, Ag was much more efficiently incorporated and retained in I. isognomon. Metals ingested with food (phytoplankton) were efficiently assimilated (34–77%) and strongly retained in oyster tissues (T_b½ ⩾ 20 d). Estimation of the relative contribution of each exposure pathway indicated that for both species sediment was the dominant pathway for Co and Cd, whereas food was the major source of Zn. Regarding Ag, seawater was the main source for I. isognomon (86%), whereas sediment was the predominant route for M. regula (92%).     

Catchment‐scale contribution of forest roads to stream exports of sediment,phosphorus and nitrogen

The relative contribution of forest roads to total catchment exports of suspended sediment, phosphorus, and nitrogen was estimated for a 13 451 ha forested catchment in southeastern Australia. Instrumentation was installed for 1 year to quantify total in‐stream exports of suspended sediment, phosphorus, and nitrogen. In addition, a total of 101 road–stream crossings were mapped and characterized in detail within the catchment to identify the properties of the road section where the road network and the stream network intersect. Sediment and nutrient generation rates from different forest road types within the catchment were quantified using permanent instrumentation and rainfall simulation. Sediment and nutrient generation rates, mapped stream crossing information, traffic data and annual rainfall data were used to estimate annual loads of sediment, phosphorus, and nitrogen from each stream crossing in the catchment. The annual sum of these loads was compared with the measured total catchment exports to estimate the proportional contribution of loads from roads within the catchment. The results indicated that 3·15 ha of near‐stream unsealed road surface with an average slope of 8·4% delivered an estimated 50 t of the 1142 t of total suspended sediment exported from the catchment, or about 4·4% of the total sediment load from the forest. Stream discharge over this period was 69 573 Ml. The unsealed road network delivered an estimated maximum of 22 kg of the 1244 kg of total phosphorus from the catchment, or less than 1·8% of the total load from the forest. The average sediment and phosphorous load per crossing was estimated at 0·5 t (standard deviation 1·0 t) and 0·22 kg (standard deviation 0·30 kg) respectively. The lower proportional contribution of total phosphorus resulted from a low ratio of total phosphorus to total suspended sediment for the road‐derived sediment. The unsealed road network delivered approximately 33 kg of the 20 163 kg of total nitrogen, about 0·16% of the total load of nitrogen from the forest. The data indicate that, in this catchment, improvement of stream crossings would yield only small benefits in terms of net catchment exports of total suspended sediment and total phosphorus, and no benefit in terms of total nitrogen. These results are for a catchment with minimal road‐related mass movement, and extrapolation of these findings to the broader forested estate requires further research. Copyright © 2007 John Wiley & Sons, Ltd.     

Professional conduct of scientists during volcanic crises

Stress during volcanic crises is high, and any friction between scientists can distract seriously from both humanitarian and scientific effort. Friction can arise, for example, if team members do not share all of their data, if differences in scientific interpretation erupt into public controversy, or if one scientist begins work on a prime research topic while a colleague with longer-standing investment is still busy with public safety work. Some problems arise within existing scientific teams; others are brought on by visiting scientists. Friction can also arise between volcanologists and public officials. Two general measures may avert or reduce friction: (a) National volcanologic surveys and other scientific groups that advise civil authorities in times of volcanic crisis should prepare, in advance of crises, a written plan that details crisis team policies, procedures, leadership and other roles of team members, and other matters pertinent to crisis conduct. A copy of this plan should be given to all current and prospective team members. (b) Each participant in a crisis team should examine his or her own actions and contribution to the crisis effort. A personal checklist is provided to aid this examination. Questions fall generally in two categories: Are my presence and actions for the public good? Are my words and actions collegial, i.e., courteous, respectful, and fair? Numerous specific solutions to common crisis problems are also offered. Among these suggestions are: (a) choose scientific team leaders primarily for their leadership skills; (b) speak publicly with a single scientific voice, especially when forecasts, warnings, or scientific disagreements are involved; (c) if you are a would-be visitor, inquire from the primary scientific team whether your help would be welcomed, and, in general, proceed only if the reply is genuinely positive; (d) in publications, personnel evaluations, and funding, reward rather than discourage teamwork. Models are available from the fields of particle physics and human genetics, among others.