Development of experimental apparatus about reverse circulation bit

A set of experimental apparatus on reverse circulation bit are developed, in order to lucubrate the mechanism of the new type reverse circulation bits, and the structure of the bits influencing the ability of taking core and carrying powder.Both the major structure of the equipment and the procession of experiment are described.     

内插管式气举反循环钻进工艺在基岩地热井中的应用

随着地热资源被广泛利用,地热井各种钻井技术新方法不断应用,如何提高地热井施工效率、降低地热井施工成本是地热井项目钻探施工的关键.气举反循环钻进工艺被广泛应用于地热井钻探施工中,然而在基岩浅井和中深井地热项目施工中,使用常规气举反循环钻进工艺存在钻具重量大、结构复杂、双壁密封不严等问题,对钻机提升能力要求较高,中小型钻机...     

Calculation of flow distribution in air reverse circulation bit interior fluid field by simplifying air flow model

By simplifying the characters in the air reverse circulation bit interior fluid field, the authors used air dynamics and fluid mechanics to calculate the air distribution in the bit and obtained an equation of flow distribution with a unique resolution. This study will provide help for making certain the bit parameters of the bit structure effectively and study the air reverse circulation bit interior fluid field character deeply.     

Calculation of flow distribution in air reverse circulation bit interior fluid field by simplifying air flow model

By simplifying the characters in the air reverse circulation bit interior fluid field, the authors used air dynamics and fluid mechanics to calculate the air distribution in the bit and obtained an equation of flow distribution with a unique resolution. This study will provide help for making certain the bit parameters of the bit structure effectively and study the air reverse circulation bit interior fluid field character deeply.     

Repacking practice for G-3 engineering driller power unit with drive shaft of dual channel reverse circulation

In order to satisfy operating requirements for constant core drilling technology in reverse circulation with hollow-through DTH, the power unit of G-3 engineering driller was ameliorated. The new one with dual channel drive shaft, achieved the perfect assemble with transmission structure of the original power unit. It could interconvert according to need by using two sets of drive shafts with direct and reverse circulation. The repacked G-3 engineering driller carried on experiment in the field test in Luanchuan molybdenum mine of Henan, whose effect was very good.     

Repacking practice for G-3 engineering driller power unit with drive shaft of dual channel reverse circulation

In order to satisfy operating requirements for constant core drilling technology in reverse circulation with hollow-through DTH,the power unit of G-3 engineering driller was ameliorated. The new one with dual channel drive shaft, achieved the perfect assemble with transmission structure of the original power unit. It could interconvert according to need by using two sets of drive shafts with direct and reverse circulation. The repacked G-3 engineering driller carried on experiment in the field test in Luanchuan molybdenum mine of Henan, whose effect was very good.     

Optimization of reverse circulation bit based on field experiment

By field experiment in Sandaozhuang W-Mo mining area in Luanchuan of Henan Province, the authors analyzed the Experimental result of reverse circulation bit on the basis of different structures and obtained the following conclusion ： the design parameter of reverse circulation bit, the number, diameter and angle of the spurt hole can influence on the reverse circulation effect. The bit with inner spurt hole is better obviously than that one without inner spurt hole in reverse circulation, one or two right and the best choice of inner spurt hole is that the diameter is Φ8, the angle is 30° dip up and the suitable number is two to three.     

Optimization of reverse circulation bit based on field experiment

By field experiment in Sandaozhuang W-Mo mining area in Luanchuan of Henan Province, the authors analyzed the Experimental result of reverse circulation bit on the basis of different structures and obtained the following conclusion: the design parameter of reverse circulation bit, the number, diameter and angle of the spurt hole can influence on the reverse circulation effect. The bit with inner spurt hole is better obviously than that one without inner spurt hole in reverse circulation, one or two right and the best choice of inner spurt hole is that the diameter is Φ8, the angle is 30° dip up and the suitable number is two to three.     

Winter meso-scale shear front in the Yellow Sea and its sedimentary effects

In this paper, the authors explored the presence of shear fronts between the Yellow Sea Coastal Current (YSCC) and the monsoon-strengthened Yellow Sea Warm Current (YSWC) in winter and their sedimentary effects within the shear zone based on a fully validated numerical model. This work added the wind force to a tidal model during simulating the winter baroclinic circulation in the Yellow Sea. The results indicate that the YSWC is significantly strengthened by wind-driven compensation due to a northeast monsoon during winter time. When this warm current encounters the North Shandong-South Yellow Sea coastal current, there is a strong reverse shear action between the two current systems, forming a reverse-S-shaped shear front that begins near 34°N in the south and extends to approximately 38°N, with an overall length of over 600 km. The main driving force for the formation of this shear front derives from the circulation system with the reverse flow. In the shear zone, temperature and salinity gradients increase, flow velocities are relatively small and the flow direction on one side of the shear zone is opposite to that on the other side. The vertical circulation structure is complicated, consisting of a series of meso- and small-scale anti-clockwise eddies. Particularly, this shear effect significantly hinders the horizontal exchange of coastal sediments carried by warm currents, resulting in fine sediments deposition due to the weak hydrodynamic regime.     

地下水循环结构的动力学研究进展

由地下水补给、径流和排泄过程构成的地下水循环运动,是水文循环的重要组成部分,也是水文地质学的基本研究对象。地下水循环在空间上表现为不同结构单元的组合,存在以含水层特性为依据的介质结构和以渗流场为依据的动力结构2种划分方法。地下水流系统是动力结构意义上的地下水循环单元。近10年来,区域地下水流系统理论取得了显著进展,更加全面深入地揭示了地下水循环结构的动力学特性。通过对河间地块地下水流系统的研究,发现潜水面最高点并非地下水分水岭的准确位置。在盆地尺度上,系统研究了沟谷地貌、降水入渗强度、渗透性随埋深变化和盆地厚度等因素对潜水面波形与地下水循环动力结构的影响,初步发现了动力结构的周期性或趋势性演化特征。通过大规模流线路径的精细识别或驻留时间的统计分析,提出了三维地下水循环单元的划分方法。在水文地质效应方面,发现地下水循环的动力结构对地下水年龄的分布有重要影响。地下水循环的动力结构反映了不同补给区和排泄区之间的水力联系,在盆地尺度地球化学过程、流域尺度生态水文过程中发挥着关键作用,未来的研究重点是三维地下水循环的动力特性和演变规律。     

真空热压烧结金刚石钻头的特点及应用前景

本文阐述了真空热压烧结金刚石钻头的特点、优越性，即排杂、脱氧、脱气、促进金属粉末合金化、降低金刚石强度的热力损失、钻头内在质量明显改善；介绍了几个厂家钻头的试验情况，对其综合效果进行评价；文章还展望了这种新型钻头的应用前景。     

普兰店元台逆冲推覆构造及控矿规律探讨

普兰店元台逆冲推覆构造为典型双重逆冲构造,以上叠式扩展而成。在自南向北逆冲过程中,形成褶皱推覆体,滞后断层,撕裂断层,反冲断层,并进一步形成构造窗和飞来峰。推覆构造形成于 J2-J3,逆冲推覆后期,花岗闪长斑岩沿逆冲推覆构造就位,其所携带的成矿热液在有利部位富集成金矿。     

南宁市地热田成因分析

文章根据南宁市地热田广西九曲湾农场地热井及热田有关资料 ,从分析南宁市隐伏地热田的地质 -水文地质条件、热储结构、热水化学成份、热水补、迳、排循环条件以及地温场特征入手 ,根据地热生成条件 ,对南宁市地热田的成因进行较全面阐述 ,归纳出南宁市地热田的成因概念模型。     

Surface circulation derived from drifting buoys in mid- and low-latitude Pacific

1 INTRODUCTION Measuring the velocity of ocean currents is one of the most important tasks in physical oceanography research. Many centuries ago, mariners had begun to obtain the sea surface cur- rents from vessel drift records. As early as in 1870s instr…     

砂石泵吸程损耗

运用流体力学理论,通过建立伯努利方程对砂石泵吸程进行详尽剖析,指出泵的实际吸程与泵的负压值、泥浆密度有关。泵的吸程将用于克服速度水头损失、沿程损失、泵的相对安装高度和携带钻渣时所产生的钻杆内外压差。对改善反循环工况提出了相应技术措施。     

湖南株洲湾塘地区地热勘查定井探讨

基岩山区地热形成必须具备"储、盖、通、源、滞"五大基本要素,以湖南株洲湾塘地区地热成因为例,说明怎样利用地热勘查手段来分析论证株洲湾塘地区地热形成的五大要素,建立热储概念模型,确定地热井位置。为提高地热钻探成井率,在基岩山区钻探施工时,建议使用气举反循环清水钻进工艺。     

Sedimentary macro-structures and forming mechanism of debris flow

IIWr~IOWThesedimentarycharacteristicsofdebrisflowcanreflectthecompoSition,fluidtypeandsedimentaryprocess.ThescholarswhostudymoderndebrisfloWinChinagenerallyclassifydebrisflowbythemethodofviscositywithfloWpattern.SeveraltypicalschemesareshowninTable1,inwhichthemethodofunitweight(fluiddensityinunitvolumet/m3)isusedandfluidunitweightisthoughttobethedirectproPOSitiontotheviscosityofdebrisflow(Wu,1990).Ithasbeenprovedbyhydrcrmechacsthatnon-cohesivedebrisf1OwfollowsBagnoldgranular'flowmedel(B…     

A HOMOGENEOUS MODEL OF UPPER LAYER CIRCULATION IN INDO-PACIFIC REGION

ImODUcrIONTheIndo-PadricregionbeweenMindanao,NewGuinea,andtheIndonesianArchipelagoistheonlydeeppassagefromthePadricOceantotheIndiandrincyig.l),Fig.lMapoftheIndoThdficopon(Internalframeisthemodeldomain)andobendupper1aperimtSthereinsmrandhasareivedconsiderableattentionhauseofitSlocationbetweretheIn.TheIndonesianThappearstobepotentiallyboortantintheevoluhonsofthewesternboundaryatandthewarmpoolinthewesternPadric,andplaysacrudelroleinthehcatandsaltbalanceoftheworkl'soasnoprdon,l986).Nume…     

湖南电网严重冰灾天气成因分析

为研究2005年初和2008年初2次造成湖南电网严重冰灾的低温雨雪冰冻天气过程的成因,利用NCEP1°×1°全球再分析资料、地面常规气象观测资料及环流特征指数资料对过程期间高中低三层的水平和垂直结构进行了诊断分析,并分析了两次冰冻天气过程中各项环流特征指数与气温的相关性,结果表明:副高强度持续偏强,中层有暖层存在,850hPa与700hPa有明显的逆温层,700hPa强劲的西南急流,850hPa南北温差锋区的建立和维持,异常强大的冷高压长时间控制是造成两次冰灾过程的主要原因;地面降水、相对湿度、日平均气温、日最低气温、风向风速均与电线覆冰直径有关,温度垂直结构、环流指数和地形也与冰冻有一定关系。     

试论大型、超大型金矿金质来源的途径——以吉林和山东地区金矿为例

通过对吉林夹皮沟及山东上庄等金矿床成矿地质条件、循环流体、构造机制及高温、压模拟实验的分析,指出金质并非由某一地质时期的地质作用所产生,而是构造成矿系统的产物;金质并非直接来自某一类岩性,而是源于多层次循环流体对多类型围岩的萃取、勾通和混合;金质并不单纯取决于成岩成矿和物理化学作用,而是多层多类型构造机制数次应力作用的综合结果。