Middle to late Miocene sequence stratigraphy of the Transylvanian Basin (Romania)

The history of Middle to Late Miocene evolution of the Transylvanian Basin was determined by the bordering Carpathian orogen evolution, the tectonic events being well recorded by the sedimentary history. The basin evolved in a back-arc setting, under a regional, compressional stress field. The major tectonic events produced during the Late Sarmatian and Post-Pannonian were related to the reactivation of the pre-Badenian fault systems. The Transylvanian Basin got uplifted after the Late Pannonian (? during the Pliocene), and at least 500 m of sedimentary cover was eroded.

Based on seismic and well-log interpretation, core and outcrop sedimentology, and microfauna, eight sequences were defined. The early Middle Miocene sequences are roughly synchronous to five 3rd order global sea-level cycles. Most of the recognized sequence boundaries are enhanced by regional tectonic events. The sedimentary evolution was also strongly influenced by salt-tectonics, active starting with the Late Sarmatian.

Two sequences were identified in the Lower Badenian deposits. The third sequence (late Early Badenian to early Mid Badenian) preserves information about deeper shelf settings. The lowstand of the following sequence was responsible for the deposition of the salt formation (late Mid Badenian), an important lithostratigraphic marker in the sedimentary record of the basin. In general, the Upper Badenian deposits (parts of the 4th and 5th sequences) belong to deep marine submarine fan systems. The Sarmatian (partially 5th, 6th and partially 7th sequences) was characterized by diverse salinity conditions, stretching from brackish to hypersaline, and by high tectonic instability, which induced several significant relative sea-level falls. During that time, deltaic (north) and fandeltaic (east) systems fed submarine fans, stacked between salt-related submarine heights (“channeled” deep-marine depocenters). Most of the Pannonian deposits (partially 7th and 8th sequences) belong to submarine fan systems, but shallower facies were also found in the western and eastern part of the basin.     

Palynological characterization of the Sarmatian deposits of the Eastern Paratethys (Section Zelenskii Mountain-Cape Panagiya,Taman Peninsula)

Palynological analysis of Sarmatian deposits found in the reference section Zelenskii Mountain-Cape Panagiya has produced new data on dinocysts and contributed to the palynological characteristics of the Sarmatian deposits of the Taman Peninsula. Six palynological assemblages have been found, reflecting the gradual replacement of forest associations with forest-steppe ones, and thus confirming the trend, revealed earlier, of climate aridization in the areas of the Eastern and Central Paratethys in the Late Sarmatian time. The distinctive cysts of the dinoflagellates Geonettia cf. clinea de Verteuil et Norris and Polykrikos schwarzii Bütschli are identified in Sarmatian deposits of the Taman Peninsula for the first time.     

Sedimentology,palaeoenvironments and biostratigraphy of the Pliocene–Pleistocene carbonate platform of Grande‐Terre (Guadeloupe,Lesser Antilles forearc)

Pliocene and Pleistocene deposits from Grande‐Terre (Guadeloupe archipelago, French Lesser Antilles) provide a remarkable example of an isolated carbonate system built in an active margin setting, with sedimentation controlled by both rapid sea‐level changes and tectonic movements. Based on new field, sedimentological and palaeontological analyses, these deposits have been organized into four sedimentary sequences (S1 to S4) separated by three subaerial erosion surfaces (SB0, SB1 and SB2). Sequences S1 and S2 (‘Calcaires inférieurs à rhodolithes’) deposited during the Late Zanclean to Early Gelasian (planktonic foraminiferal Zones PL2 to PL5) in low subsidence conditions, on a distally steepened ramp dipping eastward. Red algal‐rich deposits, which dominate the western part of Grande‐Terre, change to planktonic foraminifer‐rich deposits eastward. Vertical movements of tens of metres were responsible for the formation of SB0 and SB1. Sequence S3 (‘Formation volcano‐sédimentaire’, ‘Calcaires supérieurs à rhodolithes’ and ‘Calcaires à Agaricia’) was deposited during the Late Piacenzian to Early Calabrian (Zones PL5 to PT1a) on a distally steepened, red algal‐dominated ramp that changes upward into a homoclinal, coral‐dominated ramp. Deposition of Sequence S3 occurred during a eustatic cycle in quiet tectonic conditions. Its uppermost boundary, the major erosion surface SB2, is related to the Cala1 eustatic sea‐level fall. Finally, Sequence S4 (‘Calcaires à Acropora’) probably formed during the Calabrian, developing as a coral‐dominated platform during a eustatic cycle in quiet tectonic conditions. The final emergence of the island could then have occurred in Late Calabrian times.     

Tempestite facies models for the epicontinental Triassic carbonates of the Betic Cordillera (southern Spain)

This study focuses on storm deposits in the Muschelkalk facies of the Betic Cordillera (southern Spain) and interprets their deposition mechanisms. Three types of storm deposit are distinguished: (i) pot/gutter casts; (ii) tempestite beds; and (iii) storm‐winnowed deposits. Each deposit provides information about the carbonate platform environment in which it was deposited. The tempestite models proposed are: (i) the bypass‐zone tempestite model, occurring in a muddy ramp at the epicontinental basin margin. This model is characterized by potholes and gutters that form in a shoreline bypass‐zone during storms; (ii) the gradient‐current tempestite model in which frequent tempestite beds are related to storm gradient currents. Thickness and grain size decrease towards the deep distal ramp; and (iii) the winnowed deposit tempestite model whereby storm deposits are winnowed and deposited in the same environment with only short lateral transport having occurred. This model evokes more restricted and shallower conditions, lagoons or inland seas. The distribution of all these deposits in the stratigraphic sections studied corroborate the eustatic third‐order cycle identified, although the different features of the storm deposits and their positions in each section indicate a subsidence varying in time and space. In the transgressive stage, the margins of the epicontinental basin were a well‐developed ramp with potholes and gutters. In contrast, during the high sea‐level stage, storm deposits generated tempestite beds or storm‐winnowed deposits in the different areas. The epicontinental carbonate platform with ramp edges evolved into a complex depositional system of coastal and shallow‐marine environments with lagoons and restricted inland seas. Thus, the epicontinental platform underwent substantial change from the Late Anisian to the Late Ladinian and this is reflected in its storm deposits.     

The Middle–Late Jurassic forced regression and disconformity in central Portugal: eustatic, tectonic and climatic effects on a carbonate ramp system

Abstract Successions across the Middle–Upper Jurassic disconformity in the Lusitanian Basin (west‐central Portugal) are highly varied, and were probably developed on a large westward‐inclined hangingwall of a half‐graben. The disconformity is preceded by a complex forced regression showing marked variations down the ramp, and provides an example of the effects of rapid, relative sea‐level falls on carbonate ramp systems. In the east, Middle Jurassic inner ramp carbonates (‘Candeeiros’ facies) are capped by a palaeokarstic surface veneered by ferruginous clays or thick calcretes. In the west, mid‐outer ramp marls and limestones (‘Brenha’ facies) are terminated by two contrasting successions: (1) a sharp‐based carbonate sandbody capped by a minor erosion surface, overlain by interbedded marine–lagoonal–deltaic deposits with further minor erosion/exposure surfaces; (2) a brachiopod‐rich limestone with a minor irregular surface, overlain by marls, lignitic marls with marine and reworked non‐marine fossils and charophytic limestones, with further minor irregular surfaces and capped by a higher relief ferruginous erosional surface. The age ranges from Late Bathonian in the east to Late Callovian in the west. This disconformity assemblage is succeeded by widespread lacustrine–lagoonal limestones with microbial laminites and evaporites (‘Cabaços’ facies), attributed to the Middle Oxfordian. Over the whole basin, increasingly marine facies were deposited afterwards. In Middle Jurassic inner‐ramp zones in the east, the overall regression is marked by a major exposure surface overlain by continental sediments. In Middle Jurassic outer‐ramp zones to the west, the regression is represented initially by open‐marine successions followed by either a sharp marine erosion surface overlain by a complex sandbody or minor discontinuities and marginal‐marine deposits, in both cases capped by the major lowstand surface. Reflooding led to a complex pattern of depositional conditions throughout the basin, from freshwater and brackish lagoonal to marginal‐ and shallow‐marine settings. Additional complications were produced by possible tilting of the hangingwall of the half‐graben, the input of siliciclastics from westerly sources and climate change from humid to more seasonally semi‐arid conditions. The Middle–Late Jurassic sea‐level fall in the Lusitanian Basin is also recorded elsewhere within the Iberian and other peri‐Atlantic regions and matches a transgressive to regressive change in eustatic sea‐level curves, indicating that it is related in part to a global event.     

The myth of the brackish Sarmatian Sea

The biota of the 1.5 Ma period of the Middle Miocene Sarmatian of the Central Paratethys lack stenohaline components. This was the reason to interpret the Sarmatian stage as transitional between the marine Badenian and the lacustrine Pannonian stages. However, our new data indicate that brackish water conditions could not have prevailed. Sarmatian foraminifera, molluscs, serpulids, bryozoans, dasycladacean and corallinacean algae as well as diatoms clearly indicate normal marine conditions for the entire Sarmatian. During the Lower Sarmatian, however, a sea-level lowstand forced the development of many marginal marine environments. During the Late Sarmatian a highly productive carbonate factory of oolite shoals, mass-occurrences of thick-shelled molluscs and larger foraminifera, as well as marine cements clearly point to normal marine to hypersaline conditions. This trend is not restricted to the western margin of the Pannonian Basin System but can be observed in the entire Central and even Eastern Paratethys.     

Sequence development of Late Cenomanian–Turonian carbonate ramps, platforms and basins in Israel

The Cenomanian–Turonian carbonate-dominated lithofacies of Israel reflect a complex interplay between tectonics, sea-level change, and palaeoecology. Improved correlation based on revision of the bio- and chronostratigraphic framework has enabled the establishment of a sequence-stratigraphic model comprising five sequences delineated by four sequence boundaries, in the Late Cenomanian–Early Coniacian interval. The Late Cenomanian–Turonian succession begins with prograding, highstand, carbonate-platform deposits of the first sequence. Interruption of progradation and drowning of this platform took place within the Late Cenomanian guerangeri Zone (=the vibrayeanus Zone in Israel), resulting in a drowning unconformity which is regarded as a Type 3 sequence boundary (labelled CeUp). The drowning is attributed in part to extinctions in the rudist-dominated biofacies (e.g., Caprinidae), which led to reduced carbonate production and enhanced the impact of the sea-level rise. Similar drowning of Tethyan platforms around the C/T boundary has been linked to the establishment of coastal upwelling and consequent eutrophication. Outer ramp hemipelagic facies (Derorim and the Lower Ora formations) replaced the platform carbonates, thickening substantially southwards in the Eshet-Zenifim Basin of southern Israel. Along the ancient continental slope (Mediterranean coastal plain) evidence of this drowning is obscured by submarine erosion, while in central and northern Israel the drowned section is represented by condensation or a hiatus, reflecting an elevated, sediment-starved sea-floor. A carbonate platform dominated by rudistid shoals (‘Meleke’ Member; Shivta Formation) was re-established in the Judean hills and northern Negev during the middle part of the Turonian coloradoense Zone (local zone T4). Later, during kallesi Zone times (T7), the platform facies prograded southwards towards the Eshet-Zenifim intra-shelf basin. The drowning succession and overlying resurrected carbonate platform are topped in central and southern Israel by a pronounced Type 1 sequence boundary (Tu1) between the kallesi (T7) and ornatissimum (T8) zones (Middle Turonian). In central Israel and northern Negev the sequence boundary is overlain by lowstand deposits of the ‘Clastic Unit’ and by the transgressive and highstand inner to mid-ramp deposits of the Nezer and Upper Bina formations. In the southern Negev the sequence boundary is overlain by lowstand and transgressive systems tracts of mixed carbonates, siliciclastics, and localized evaporites (Upper Ora Formation), and then by mid to inner ramp carbonates of the Gerofit Formation. The latter represents a very high rate of accumulation, indicating rapid, continued subsidence balanced by platform growth. The Tu2 sequence boundary of the Late Turonian is expressed in the southern Negev by a shift from inner ramp carbonates of the Gerofit Formation to outer ramp chalky limestones of the Zihor Formation, indicating localized drowning. The succeeding Co1 sequence boundary again indicates localized drowning of the prograding highstand deposits of the Zihor Formation (‘Transition Zone’) overlain by Lower Coniacian transgressive deposits of the upper part of the Zihor Formation. All of these third-order sequences are expressed in southern Israel, where the rate of subsidence was in balance with sea-level fluctuations. In contrast, the Judean Hills and eastern Galilee areas have a more incomplete succession, characterized by hiatuses and condensation, because of reduced subsidence. More distal areas of continuous deep-water deposition in western Galilee and the coastal plain failed to record the Middle Turonian lowstand, while a longer term, second-order sequence spanning the entire Late Cenomanian–Early Coniacian interval, is present in the Carmel and Yirka Basin areas.     

Sequence Stratigraphy and Rudist Facies Development of the Upper Barremian‐Lower Cenomanian Platform,Northern Sinai,Egypt

The Lower Cretaceous sections in northern Sinai are composed of the Risan Aneiza (upper Barremian-middle Albian) and the Halal (middle Albian-lower Cenomanian) formations. The facies reflect subtle paleobathymetry from inner to outer ramp facies. The inner ramp facies are peritidal, protected to open marine lagoons, shoals and rudist biostrome facies. The inner ramp facies grade northward into outer ramp deposits. The upper Barremian-lower Cenomanian succession is subdivided into nine depositional sequences correlated with those recognized in the neighbouring Tethyan areas. These sequences are subdivided into 19 medium-scale sequences based on the facies evolution, the recorded hardgrounds and flooding surfaces, interpreted as the result of eustatic sea level changes and local tectonic activities of the early Syrian Arc rifting stage. Each sequence contains a lower retrogradational parasequence set that constituted the transgressive systems tracts and an upper progradational parasequence set that formed the highstand systems tracts. Nine rudist levels are recorded in the upper Barremian through lower Cenomanian succession at Gabal Raghawi. At Gabal Yelleg two rudist levels are found in the Albian. The rudist levels are associated with the highstand systems tract deposits because of the suitability of the trophic conditions in the rudist-dominated ramp.     

Development of an incised valley‐fill at an evolving rift margin: Pleistocene eustasy and tectonics on the southern side of the Gulf of Corinth,Greece

This study from the southern margin of the Gulf of Corinth documents a Late Pleistocene incised valley‐fill succession that differs from the existing facies models, because it comprises gravelly shoal‐water and Gilbert‐type deltaic deposits, shows strong wave influence and lacks evidence of tidal activity. The valley‐fill is at least 140 m thick, formed in 50 to 100 ka between the interglacials Marine Isotope Stage 9a and Marine Isotope Stage 7c. The relative sea‐level rise left its record both inside and outside the incised valley, and the age of the valley‐fill is estimated from a U/Th date of coral‐bearing deposits directly outside the palaeovalley outlet. Tectonic up‐warping due to formation of a valley‐parallel structural relay ramp contributed to the valley segmentation and limited the landward extent of marine invasions. The valley segment upstream of the ramp crest was filled with a gravelly alluvium, whereas the downstream segment accumulated fluvio‐deltaic deposits. The consecutive deltaic systems nucleated in the ramp‐crest zone, forming a bathymetric gradient that promoted the ultimate growth of thick Gilbert‐type delta. The case study contributes to the spectrum of conceptual models for incised valley‐fill architecture. Four key models are discussed with reference to the rates of sediment supply and accommodation development, and it is pointed out that not only similarity, but also all departures of particular field cases from these end‐member models may provide valuable information on the system formative conditions. The Akrata incised valley‐fill represents conditions of high sediment supply and a rapid, but stepwise development of accommodation that resulted from the spatiotemporal evolution of normal faulting at the rift margin and overprinted glacioeustatic signals. This study adds to an understanding of valley‐fill architecture and provides new insights into the Pleistocene tectonics and palaeogeography of the Corinth Rift margin.     

Stratigraphic and lithologic characteristics of Pleistocene fluvial deposits in the Danube and Sava riparian area near Belgrade (Serbia)

The Quaternary sediments in the Danube and Sava riparian area near Belgrade have a considerable thickness. Several categories of deposits (fluvial-lacustrine, fluvial and aeolian) of Pliocene and Quaternary age have been identified. Their thickness, granulometric composition and paleontological features change depending on the distance from the recent Danube and Sava riverbeds. The Pleistocene fluvial deposits are underlain by sediments of the Late Miocene (Sarmatian and Pannonian) or the Plio-Pleistocene age, and are overlain by fluvial-palustrine deposits of the Pleistocene age and recent alluvial deposits. Pleistocene fluvial deposits that form a major part of the Quaternary sediments, have a great significance, since they are proved to be excellent collectors of ground water. Although these deposits are at lower altitudes in the area of Srem, they could be correlated with the high Danube and Morava terraces in Serbia and Drava in Croatia on the basis of their lithologic and paleontological features.     

Active synsedimentary tectonism on a mixed carbonate–siliciclastic continental margin: third‐order sequence stratigraphy of a ramp to basin transition,lower Sekwi Formation,Selwyn Basin,Northwest Territories,Canada

The lower part of the Early Cambrian Sekwi Formation in the Selwyn Basin of the Northwest Territories, Canada, is composed of two regional, unconformity‐bounded sequences, S0 and S1, which record the first widespread carbonate deposition during the initial Palaeozoic transgression onto the western margin of Laurentia. These Early Cambrian sequences are unique to the western North American Cordillera, representing the only record of primarily deep‐water deposition on a tectonically active, mixed carbonate–siliciclastic ramp during this period. More specifically, the geometry of the Sekwi ramp changed during deposition of S0 and S1, from a shallowly dipping homoclinal ramp during the S0 transgressive systems tract to a steeply dipping tectonically modified ramp during the early highstand systems tract of S0. The steeply dipping ramp profile of S0 was preserved into the early transgressive systems tract of S1. The Sekwi ramp returned to a gently sloping ramp during the late highstand systems tract of S1 and remained so throughout the remainder of Sekwi deposition. The evolving shape of the Sekwi ramp is attributed to syndepositional ‘down to the basin’ faulting during deposition of both S0 and S1 and is recorded by: (i) the westward thickening, irregular geometries of S0 and S1; (ii) geographical restriction of deep‐water facies (including sediment gravity flow deposits); (iii) the presence of large allochthonous blocks; and (iv) the clast composition of sediment gravity flow deposits. Sediment gravity flow deposits play an unusually important role in the sequence stratigraphic interpretation of the lower Sekwi Formation, as they delineate depositional packages, including the maximum flooding zone, the transitions between portions of systems tracts, and the inferred locations of syntectonic extensional faults. Syntectonic faults increased accommodation basinward of an extensive ooid‐shoal complex that developed along the Sekwi ramp crest, greatly influencing sequence geometry and initiating the downslope motion of sediment gravity flows. The syndepositional faulting probably was a continuation of extension that began during the latest Neoproterozoic rifting of western Laurentia. The composition of sediment gravity flow deposits track changing accommodation space on the lower Sekwi ramp and can be used to differentiate systems tracts that probably were related more to tectonism than eustasy.     

Climate control on the evolution of Late Pleistocene alluvial‐fan and aeolian sand‐sheet systems in NW Germany

The Late Pleistocene was characterized by rapid climate oscillations with alternation of warm and cold periods that lasted up to several thousand years. Although much work has been carried out on the palaeoclimate reconstruction, a direct correlation of ice‐core, marine and terrestrial records is still difficult. Here we present new data from late Middle Pleniglacial to Lateglacial alluvial‐fan and aeolian sand‐sheet deposits in northwestern Germany. Records of Late Pleniglacial alluvial fans in central Europe are very rare, and OSL dating is used to determine the timing of fan aggradation. In contrast to fluvial systems that commonly show a delay between climate change and incision/aggradation, the small alluvial‐fan systems of the Senne area responded rapidly to climatic changes and therefore act as important terrestrial climate archives for this time span. The onset of alluvial‐fan deposition correlates with the climate change from warm to cold at the end of MIS 3 (29.3±3.2 ka). Strong fan progradation started at 24.4±2.8 ka and may be related to a period of higher humidity. The vertical stacking pattern of sedimentary facies and channel styles indicate a subsequrent overall decrease in water and sediment supply, with less sustained discharges and more sporadic runoffs from the catchment area, corresponding to an increasing aridity in central Europe during the Late Pleniglacial. Major phases of channel incision and fan aggradation may have been controlled by millennial‐scale Dansgaard–Oeschger cycles. The incision of channel systems is attributed to unstable climate phases at cold–warm (dry–wet) or warm–cold (wet–dry) transitions. The alluvial‐fan deposits are bounded by an erosion surface and are overlain by aeolian sand‐sheets that were periodically affected by flash‐floods. This unconformity might be correlated with the Beuningen Gravel Bed, which is an important marker horizon in deposits of the Late Pleniglacial resulting from deflation under polar desert conditions. The deposition of aeolian sand‐sheet systems (19.6±2.1 to 13.1±1.5 ka) indicates a rapid increase in aridity at the end of the Late Pleniglacial. Intercalated flash‐floods deposits and palaeosols (Finow type) point to temporarily wet conditions during the Lateglacial. The formation of an ephemeral channel network probably marks the warm‐cold transition from the Allerød to the Younger Dryas.     

Sea-level fluctuations on the northern shelf of the Eastern Paratethys in the Oligocene-Neogene

Sea-level fluctuations in the terminal Eocene, Oligocene, and Neogene of the Eastern Paratethys are quantitatively assessed on the basis of facies and old coastlines traced on the northern platform shelf, levels of river valley incisions, and the study of seismic profiles. The first data massif allows the characterization and correlation of transgression stages in the history of the Eastern Paratethys. The greatest transgressions fall within the first half of the Late Eocene, mid-Early Oligocene, initial Late Oligocene, initial Early Miocene, the initial Tchokrakian, Karaganian and Sarmatian in the Middle Miocene, the middle and late Sarmatian and early Pontian in the Late Miocene, and the Akchagylian in the Caspian basin of the Pliocene. In contrast, the greatest incisions of northern rivers running from the platform allow us to establish the time and extent of the main declines in the base levels of the erosion. Maximal incisions date back to the terminal Eocene-initial Oligocene, terminal Solenovian time in the terminal Rupelian, the terminal Maikop in the Early Miocene, the terminal Sarmatian and middle Pontian in the Late Miocene, and the Early Pliocene in the Caspian basin. Large regressions also formed unconformity surfaces, traced on seismic profiles as erosion boundaries of several orders. The surfaces are confined to the Eocene/Oligocene boundary, middle and late Maikop, Sarmatian/Meotian boundary, middle Pontian, and terminal Miocene-initial Pliocene, as well as being traced even in the most deep-water basins. The synthesis of these data suggests a preliminary version for the curve of transgression-regression cyclicity. Its correlation with the eustatic curve shows their similarity only in the lower part-prior to the initial Middle Miocene, when Paratethys became a semi-closed basin.     

Basin formation during the post-collisional evolution of the Eastern Alps: the example of the Lavanttal Basin

The Miocene Lavanttal Basin formed in the Eastern Alps during extrusion of crustal blocks towards the east. In contrast to basins, which formed contemporaneously along the strike-slip faults of the Noric Depression and on top of the moving blocks (Styrian Basin), little is known about the Lavanttal Basin. In this paper geophysical, sedimentological, and structural data are used to study structure and evolution of the Lavanttal Basin. The eastern margin of the 2-km-deep basin is formed by the WNW trending Koralm Fault. The geometry of the gently dipping western basin flank shows that the present-day basin is only a remnant of a former significantly larger basin. Late Early (Karpatian) and early Middle Miocene (Badenian) pull-apart phases initiated basin formation and deposition of thick fluvial (Granitztal Beds), lacustrine, and marine (Mühldorf Fm.) sediments. The Mühldorf Fm. represents the Lower Badenian cycle TB2.4. Another flooding event caused brackish environments in late Middle Miocene (Early Sarmatian) time, whereas freshwater environments existed in Late Sarmatian time. The coal-bearing Sarmatian succession is subdivided into four fourth-order sequences. The number of sequences suggests that the effect of tectonic subsidence was overruled by sea-level fluctuations during Sarmatian time. Increased relief energy caused by Early Pannonian pull-apart activity initiated deposition of thick fluvial sediments. The present-day shape of the basin is a result of young (Plio-/Pleistocene) basin inversion. In contrast to the multi-stage Lavanttal Basin, basins along the Noric Depression show a single-stage history. Similarities between the Lavanttal and Styrian basins exist in Early Badenian and Early Sarmatian times.     

Stages of development in the Polish Carpathian Foredeep basin

In southern Poland, Miocene deposits have been recognised both in the Outer Carpathians and the Carpathian Foredeep (PCF). In the Outer Carpathians, the Early Miocene deposits represent the youngest part of the flysch sequence, while in the Polish Carpathian Foredeep they are developed on the basement platform. The inner foredeep (beneath the Carpathians) is composed of Early to Middle Miocene deposits, while the outer foredeep is filled up with the Middle Miocene (Badenian and Sarmatian) strata, up to 3,000mthick. The Early Miocene strata are mainly terrestrial in origin, whereas the Badenian and Sarmatian strata are marine. The Carpathian Foredeep developed as a peripheral foreland basin related to the moving Carpathian front. The main episodes of intensive subsidence in the PCF correspond to the period of progressive emplacement of the Western Carpathians onto the foreland plate. The important driving force of tectonic subsidence was the emplacement of the nappe load related to subduction roll-back. During that time the loading effect of the thickening of the Carpathian accretionary wedge on the foreland plate increased and was followed by progressive acceleration of total subsidence. The mean rate of the Carpathian overthrusting, and north to north-east migration of the axes of depocentres reached 12 mm/yr at that time. During the Late Badenian-Sarmatian, the rate of advance of the Carpathian accretionary wedge was lower than that of pinch-out migration and, as a result, the basin widened. The Miocene convergence of the Carpathian wedge resulted in the migration of depocentres and onlap of successively younger deposits onto the foreland plate.     

Downslope‐migrating sandwaves and platform‐margin clinoforms in a current‐dominated,distally steepened temperate‐carbonate ramp (Guadix Basin,Southern Spain)

During the Late Tortonian, platform‐margin‐prograding clinoforms developed at the south‐western margin of the Guadix Basin. Large‐scale wedge‐shaped deposits here comprise 26 rhythms of mixed carbonate–siliciclastic bedset packages and marl beds. These sediments were deposited on a shallow‐water, temperate‐carbonate distally steepened ramp. A downslope‐migrating sandwave field developed in this ramp, with sandwaves moving progressively down the ramp to the ramp‐slope, where they destabilized, folded and occasionally collapsed. Downslope sandwave migration was induced by currents flowing basinwards. During the Late Tortonian, the Guadix Basin was open north to the Atlantic Ocean via the Dehesas de Guadix Strait and connected east to the Mediterranean Sea through the Almanzora Corridor. According to the proposed current circulation model for the Guadix Basin for this time, surface marine currents from the Atlantic entered the basin from the northern seaway. These currents moved counter‐clockwise and shifted the sediment on the ramp, forming sandwaves that migrated downslope. The development of platform‐margin prograding clinoforms by the basinward sediment‐transport mechanisms inferred here is known relatively poorly in the ancient sedimentary record. Moreover, these wedge‐shaped geometries are similar to those found in some shelves in the Western Mediterranean Sea and could represent an outcrop analogue to (sub)‐recent, platform‐margin clinoforms revealed by high‐resolution seismic studies.     

Internal anatomy of a mixed siliciclastic–carbonate platform: the Late Cenomanian–Mid Turonian at the southern margin of the Spanish Central System

The Late Cenomanian–Mid Turonian succession in central Spain is composed of siliciclastic and carbonate rocks deposited in a variety of coastal and marine shelf environments (alluvial plain–estuarine, lagoon, shoreface, offshore‐hemipelagic and carbonate ramp). Three depositional sequences (third order) are recognized: the Atienza, Patones and El Molar sequences. The Patones sequence contains five fourth‐order parasequence sets, while a single parasequence set is recognized in the Atienza and El Molar sequences. Systems tracts can be recognized both in the sequences and parasequence sets. The lowstand systems tracts (only recognized for Atienza and Patones sequences) are related to erosion and sequence boundary formation. Transgressive systems tracts are related to marine transgression and shoreface retreat. The highstand systems tracts are related to shoreface extension and progradation, and to carbonate production and ramp progradation. Sequences are bounded by erosion or emergence surfaces, whose locations are supported by mineralogical analyses and suggest source area reactivation probably due to a fall in relative sea‐level. Transgressive surfaces are subordinate erosion and/or omission surfaces with a landward facies shift, interpreted as parasequence set boundaries. The co‐existence of siliciclastic and carbonate sediments and environments occurred as facies mixing or as distinct facies belts along the basin. Mixed facies of coastal areas are composed of detrital quartz and clays derived from the hinterland, and dolomite probably derived from bioclastic material. Siliciclastic flux to coastal areas is highly variable, the maximum flux postdates relative sea‐level falls. Carbonate production in these areas may be constant, but the final content is a function of changing inputs in terrigenous sediments and carbonate content diminishes through a dilution effect. Carbonate ramps were detached from the coastal system and separated by a fringe of offshore, fine‐grained muds and silts as distinct facies belts. The growth of carbonate ramp deposits was related to the highstand systems tracts of the fourth‐order parasequence sets. During the growth of these ramps, some sediment starvation occurred basinwards. Progradation and retrogradation of the different belts occur simultaneously, suggesting a sea‐level control on sedimentation. In the study area, the co‐existence of carbonate and siliciclastic facies belts depended on the superimposition of different orders of relative sea‐level cycles, and occurred mainly when the second‐order, third‐order and fourth‐order cycles showed highstand conditions.     

Mesozoic molybdenum deposits in the east Qinling–Dabie orogenic belt: Characteristics and tectonic settings

The East Qinling–Dabie orogenic belt accommodates the largest Mo ore district in the world. It contains 8.43 Mt of proven Mo metal reserves which accounts for 66% of the total proven Chinese Mo reserves. The Mo ore district includes 24 deposits and 12 occurrences, with four major types of Mo mineral systems, i.e., porphyry, porphyry-skarn, skarn and hydrothermal veins. The latter can be further subdivided into quartz vein and carbonatite vein types. Although Mo mineralization in the belt began in the Paleoproterozoic (1680 ± 24 to 2044 ± 14 Ma), all economically significant deposits were formed during the Mesozoic. Re/Os dating of molybdenite has shown that there are three episodes of Mo mineralization, i.e., Late Triassic (233–221 Ma), Late Jurassic to Early Cretaceous (148–138 Ma) and Early to middle Cretaceous (131–112 Ma).Late Triassic Mo deposits developed as molybdenite–quartz veins and carbonatite vein types. Stable isotope systematics (C, O, S) and high contents of Re and Sr indicate that the carbonatite Mo veins are mantle-derived. Porphyry and porphyry–skarn Mo mineral deposits were formed in the Late Jurassic to Early Cretaceous and Early to middle Cretaceous. The Late Jurassic to Early Cretaceous granite porphyries that are associated with the Mo deposits usually occupy less than 1.5 km² at the surface and are situated in the East Qinling area, far west of China's continental margin. On the other hand, the Early to middle Cretaceous batholiths and granite porphyries, , with associated Mo deposits are located in the Dabieshan area and eastern part of the East Qinling area. The Late Jurassic to Early Creataceous granitoids and related Mo deposits possibly formed in a back-arc extensional setting of the Eurasian continental margin, which was probably triggered by the oblique subduction of the Izanagi plate. The Early to middle Cretaceous batholiths and granite porphyries are linked to the tectonic regime of lithospheric thinning, asthenospheric upwelling and partial melting of the crust, induced by a change in Izanagi Plate motion parallel to the continent margin.In the East Qinling–Dabie belt there are vein type Pb–Zn–Ag deposits surrounding porphyry and/or porphyry–skarn Mo (W) deposits, forming well defined ore clusters. The same spatial arrangement (i.e., porphyry Mo stockworks and outlying Pb–Zn–Ag ore veins) is also observed at the deposit scale. Thus, Mo porphyry stockworks and distal polymetallic veins belong to the same ore system and may reflect an outward temperature decrease from the highly fractionated granite plutons. Both, porphyry stockworks and polymetallic veins, can be used as vectors for further prospecting.     

Facies Analysis and Sequence Stratigraphy of Silurian Carbonate Ramps in the Turan (Kopeh-Dagh) and Central Iran Plates with Emphasis on Gondwana Tectonic Event

Two sections from the Silurian deposits in the Central Iran Micro and Turan Plates were measured and sampled. These deposits are mostly composed of submarine volcanic rocks, skeletal and non-skeletal limestone, shale and sandstone that were deposited in low to high energy conditions (from tidal flat to deep open marine). According to gradual deepening trend, wide lateral distribution of facies as well as absence of resedimentation deposits, a depositional model of a homoclinal ramp was proposed for these deposits. Field observations and facies distribution indicate that, two depositional sequences were recognized in both sections. These sections show similarities in facies and depositional sequence during the Early Silurian in the area. Although there are some opinions and evidences that demonstrated Paleo-Tethys rifting phase started at the Late Ordovician-Early Silurian, similarities suggest that the Turan and Iran Plates were not completely detached tectonic block during this time, and that their depositional conditions were affected by global sea level changes and tectonic events.     

Sedimentation in an actively tilting half-graben: sedimentology and stratigraphy of Late Tournaisian–Viséan (Mississippian, Lower Carboniferous) carbonate rocks in south County Wexford, Ireland

The Wexford Basin (south-eastern Ireland) is a NE–SW-trending sedimentary basin containing carbonates and evaporites deposited during the Late Tournaisian and Viséan. Two separate depositional areas are defined on the basis of facies and facies associations. Sediments were deposited in inner ramp, lagoonal and peritidal environments near Rosslare, and in a more open-marine, shallow- to moderately deep-water, mid to outer ramp environment in the western area around Duncormick. Thick breccia deposits that occur in the Wexford Basin formed as a result of (i) fault movement that produced syn-sedimentary debris flows in the Late? Chadian (Breccia type I); (ii) dissolution of anhydrite/gypsum and subsequent collapse of sedimentary strata (Breccia type II); and (iii) fracturing and brecciation of porous rock caused by the movement of high temperature, late diagenetic fluids along fault planes (Breccia type III). The NE–SW facies polarity displayed by both sedimentary successions was the result of NW–SE extension and the reactivation of the NE–SW-trending Wexford Boundary Fault during the Chadian. Extension at the SE margin of the basin with downthrow to the NNW gave the basin a half-graben character. Thickening of the debris flow deposits to the SW suggests that while the half-graben was being tilted it also underwent a NE–SW block rotation due to an axial component of that normal fault.