桂西巴马料屯金矿床成矿年代上限的确定——对滇黔桂“金三角”卡林型金矿年代学研究的启示

广西巴马料屯金矿床是较为典型的卡林型金矿床,金矿体与燕山晚期石英斑岩脉空间上相关。矿床勘查成果和野外露头观察均表明石英斑岩脉切割金矿体,说明岩浆岩形成于矿体之后。成矿元素地球化学测量结果表明,Au、As元素沿石英斑岩脉走向出现明显的分异,表现为在导矿和容矿断层区段Au、As质量分数高,局部形成矿（化）体;远离矿体的砂泥岩和灰岩围岩地段,则逐渐降低至正常背景值,说明石英斑岩侵位过程中切割早期的矿体或含矿断层,萃取了矿（化）体中成矿元素Au、As,从而在这些断层之间形成一定宽度的高值带。成矿元素地球化学测量支持岩浆岩形成于矿体之后的结论。石英斑岩脉白云母斑晶的⁴⁰Ar/³⁹Ar坪年龄为（95.5±0.7） Ma,代表了岩浆侵位年龄,由于岩脉形成于矿体之后,此年龄可以作为成矿年代的上限年龄。本矿床及滇黔桂"金三角"其他卡林型金矿的确切成矿年代,尚需更多高精度直接成矿年龄数据的约束。     

西藏冈底斯南缘雄村铜金矿床成矿斑岩厘定及其锆石U-Pb和黑云母Ar-Ar年龄分析

雄村特大型斑岩铜金矿床主要以细脉浸染状产于强烈蚀变岩石中,赋矿岩石原岩成因类型存在争议。本文对多个赋矿蚀变岩石作了系统光薄片显微鉴定,在多个蚀变较弱的矿化样品中发现赋矿岩石具斑状结构,其基质主要为钾长石,斑晶主要为斜长石、钾长石及少量石英,显示石英正长斑岩及二长斑岩(少量)矿物组成特征。结合前人工作,可以认为雄村铜金矿床赋矿岩石为正长斑岩、火山岩及少量二长斑岩。正长斑岩发育斑岩铜金矿床成矿早期常见的钾硅化蚀变及磁铁矿化蚀变,锆石具高的Ce4+/Ce3+比值(334~3084,平均值为1169),显示高氧逸度岩浆特征,和世界斑岩铜金矿床成矿岩体一致;这表明石英正长斑岩为雄村铜金矿床成矿岩体。石英正长斑岩锆石LA-ICP-MS U-Pb年龄为173.7±2.1Ma(MSWD=0.23),石英正长斑岩钾化阶段形成的黑云母40Ar/39Ar坪年龄为48.3±0.9Ma(MSWD=1.58),远小于锆石U-Pb年龄却与矿区东北部始新世花岗岩基的年龄一致,显示Ar-Ar年龄受后期地质事件影响而发生重置。通过上述研究,可以认为雄村铜金矿床为与石英正长斑岩有关的斑岩型矿床,形成时代约173Ma,和新特提斯洋洋壳向北俯冲诱发的岩浆事件有关,矿区内云母受后期地质事件影响重置,不能记录其形成时代。     

Zircon U–Pb,Molybdenite Re–Os and K‐feldspar 40Ar/39Ar Dating of the Bolong Porphyry Cu–Au Deposit,Tibet, China

The Bolong porphyry Cu–Au deposit is a newly discovered deposit in the central Tibetan Plateau, and is ranked as the second largest copper deposit discovered to date in the Bangong‐Nujiang metallogenic belt in China. Three granodiorite porphyry phases occur within the Bolong porphyry Cu–Au deposit. Phyllic alteration is widespread on the surface of the deposit, and potassic alteration occurs at depth, associated with granodiorite porphyries. The copper and gold mineralization is clearly related to the potassic and phyllic alteration. Multiple chronometers were applied to constrain the timing of magmatic–hydrothermal activity at the Bolong deposit. Zircon U–Pb geochronology reveals that the granodiorite porphyry phases were emplaced at ca. 120 Ma. Re–Os data of four molybdenite samples from quartz–molybednite veinlets yielded an isochron age of 119.4 ± 1.3 Ma. The plateau age of hydrothermal K‐feldspar from the potassic alteration zone, analyzed by ⁴⁰Ar/³⁹Ar dating, is 118.3 ± 0.6 Ma, with a similar reverse isochron age of 118.5 ± 0.7 Ma. Therefore, the magmatic–hydrothermal activity occurred at ca. 120–118 Ma, which is similar in age to the neighboring Duobuza porphyry copper deposit. The period of 120–118 Ma is therefore important for the development of porphyry Cu–Au mineralization in the central Tibetan Plateau, and these porphyry deposits were formed during the final stages of the northward subduction of the Neo‐Tethys Ocean.     

Geology and mineralization of the Pulang supergiant porphyry copper deposit (5.11 Mt) in Shangri-la,Yunnan Province,China: A review

The porphyry copper belt in the Geza island arc in southwestern China is the only Indosinian porphyry copper metallogenic belt that has been discovered and evaluated so far. The Pulang porphyry copper deposit (also referred to as the Pulang deposit) in this area has proven copper reserves of 5.11×10⁶ t. This deposit has been exploited on a large scale using advanced mining methods, exhibiting substantial economic benefit. Based on many research results of previous researchers and the authors’ team, this study proposed the following key insights. (1) The Geza island arc was once regarded as an immature island arc with only andesites and quartz diorite porphyrites occurring. This understanding was overturned in this study. Acidic endmember components such as quartz monzonite porphyries and quartz monzonite porphyries have been identified in the Geza island arc, and the mineralization is mainly related to the magmatism of quartz monzonite porphyries. (2) Complete porphyry orebodies and large vein orebodies have developed in the Pulang deposit. Main orebody KT1 occurs in the transition area between the potassium silicate alteration zone of quartz monzonite porphyries and the sericite-quartz alteration zone. Most of them have developed in the potassium silicate alteration zone. The main orebody occurs as large lenses at the top of the hanging wall of rock bodies, with an engineering-controlled length of 1920 m and thickness of 32.5‒630.29 m (average: 187.07 m). It has a copper grade of 0.21%‒1.56% (average: 0.42%) and proven copper resources of 5.11×10⁶ t, which are associated with 113 t of gold, 1459 t of silver, and 170×10³ t of molybdenum. (3) Many studies on diagenetic and metallogenic chronology, isotopes, and fluid inclusions have been carried out for the Pulang deposit, including K-Ar/Ar-Ar dating of monominerals (e.g., potassium feldspars, biotites, and amphiboles), zircon U-Pb dating, and molybdenite Re-Os dating. The results show that the porphyries in the Pulang deposit are composite plutons and can be classified into pre-mineralization quartz diorite porphyrites, quartz monzonite porphyries formed during the mineralization, and post-mineralization granite porphyries, which were formed at 223±3.7 Ma, 218±4 Ma, and 207±3.9 Ma, respectively. The metallogenic age of the Pulang deposit is 213‒216 Ma. (4) The petrogeochemical characteristics show that the Pulang deposit has the characteristics of volcanic arc granites. The calculation results of trace element contents in zircons show that quartz monzonite porphyries and granite porphyries have higher oxygen fugacity. The isotopic tracing results show that the diagenetic and metallogenic materials were derived from mixed crust- and mantle-derived magmas.©2022 China Geology Editorial Office.     

Zircon U–Pb and Wolframite Sm–Nd Dating of the Bayinsukhtu Tungsten Deposit in Southern Mongolia and its Geological Significance

The Bayinsukhtu tungsten deposit is a newly discovered quartz‐vein tungsten deposit in the Xing'an–Mongolia Orogenic Belt (XMOB) in southern Mongolia, hosted by the Bayinsukhtu granite porphyry. The granite porphyry is located mainly south of the study area, over 3 km². The rock consists of quartz and feldspar phenocrysts in a fine‐grained matrix, also mainly composed of feldspar and quartz. The granite porphyry samples demonstrate high SiO₂ and high alkalinity. All samples also straddle the high‐potassium calc‐alkaline series. In a plot of the molar ratios of A/NK versus A/CNK, the granites are metaluminous. The chondrite‐normalized REE patterns are characterized by large negative Eu anomalies and fractionated LREEs. The U–Pb age of zircons from the granite porphyry is 298.8 ± 1.8 Ma, and the Sm–Nd age of the five wolframite samples from the tungsten deposit is 303 ± 19 Ma. The cooling age of the granite porphyry and tungsten mineralization is within the error of measurement and is of the Late Carboniferous age. Geological and geochronological evidence shows that the tungsten mineralization and the granite porphyry at Bayinsukhtu are genetically closely related and that they are results of Carboniferous magmatism. Their tectonic setting is related to the accretion of the Central Asian Orogenic Belt during the late Paleozoic era.     

Re–Os and <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar ages of the Jiguanshan porphyry Mo deposit,Xilamulun metallogenic belt,NE China,and constraints on mineralization events

The large Jiguanshan porphyry Mo deposit, with more than 100 Mt of ore and grades ranging from 0.08% to 0.11%, is located in the newly identified Xilamulun metallogenic belt along the northern margin of the North China Craton. The Mo mineralization is predominantly disseminated in the host granite porphyry, but locally occurs as stockworks in lithic tuff and rhyolitic rocks. ⁴⁰Ar/³⁹Ar dates of samples from groundmass material in the host granite porphyry, post-ore diabase, and quartz porphyry dikes show plateau ages of 155.1 ± 1.9, 149.4 ± 0.9, and 147.6 ± 0.9 Ma, with inverse isochron ages of 156.0 ± 1.8, 149.3 ± 1.3, and 148.3 ± 1.2 Ma, respectively. Seven samples of disseminated molybdenite yielded a weighted average ¹⁸⁷Re-¹⁸⁷Os age of 155.3 ± 0.9 Ma, whereas six veinlet-type molybdenite samples yielded a weighted average ¹⁸⁷Re-¹⁸⁷Os age of 153.0 ± 0.9 Ma, providing direct timing constraints for the Mo mineralization at 153–155 Ma. The regional geological setting together with the emplacement of post-ore diabase and quartz porphyry dikes in the Jiguanshan deposit, are indicative of an extensional regime in Late Jurassic, which was probably linked to lithospheric extension in northeast China.     

Geology,Fluid Inclusion,and Sulfur Isotope Studies of the Chehugou Porphyry Molybdenum–Copper Deposit,Xilamulun Metallogenic Belt,NE China

The Chehugou Mo–Cu deposit, located 56 km west of Chifeng, NE China, is hosted by Triassic granite porphyry. Molybdenite–chalcopyrite mineralization of the deposit mainly occurs as veinlets in stockwork ore and dissemination in breccia ore, and two ore‐bearing quartz veins crop out to the south of the granite porphyry stock. Based on crosscutting relationships and mineral paragenesis, three hydrothermal stages are identified: (i) quartz–pyrite–molybdenite ± chalcopyrite stage; (ii) pyrite–quartz ± sphalerite stage; and (iii) quartz–calcite ± pyrite ± fluorite stage. Three types of fluid inclusions in the stockwork and breccia ore are recognized: LV, two‐phase aqueous inclusions (liquid‐rich); LVS, three‐phase liquid, vapor, and salt daughter crystal inclusions; and VL, two‐phase aqueous inclusions (gas‐rich). LV and LVS fluid inclusions are recognized in vein ore. Microthermometric investigation of the three types of fluid inclusions in hydrothermal quartz from the stockwork, breccia, and vein ores shows salinities from 1.57 to 66.75 wt% NaCl equivalents, with homogenization temperatures varying from 114°C to 550°C. The temperature changed from 282–550°C, 220–318°C to 114–243°C from the first stage to the third stage. The homogenization temperatures and salinity of the LV, LVS and VL inclusions are 114–442°C and 1.57–14.25 wt% NaCl equivalent, 301–550°C and 31.01–66.75 wt% NaCl equivalent, 286–420°C and 4.65–11.1 wt% NaCl equivalent, respectively. The VL inclusions coexist with the LV and LVS, which homogenize at the similar temperature. The above evidence shows that fluid‐boiling occurred in the ore‐forming stage. δ³⁴S values of sulfide from three type ores change from ?0.61‰ to 0.86‰. These δ³⁴S values of sulfide are similar to δ³⁴S values of typical magmatic sulfide sulfur (c. 0‰), suggesting that ore‐forming materials are magmatic in origin.     

东天山土屋–延东铜矿带石英钠长斑岩与辉钼矿形成年龄及其重要意义

土屋–延东铜矿带位于东天山大南湖–头苏泉岛弧带上,是目前新疆最大的铜矿带。铜矿体主要赋存于石炭纪斜长花岗斑岩和晚古生代企鹅山群中,但是前人研究表明斜长花岗斑岩的成岩年龄(339~332 Ma),明显老于成矿年龄(约322Ma),因此,土屋–延东铜矿带的致矿岩体至今还存有争议。本次研究首次对该铜矿带晚石炭世石英钠长斑岩进行了详细的岩相学和LA-ICP-MS锆石U-Pb年代学分析,并结合辉钼矿Re-Os同位素年龄测定,探讨土屋–延东铜矿带矿床成因。对延东铜矿4件辉钼矿样品进行Re-Os同位素分析,得到322.0±2.7 Ma的加权平均模式年龄和319.1±9.1 Ma等时线年龄,明显要晚于斜长花岗斑岩年龄。两个石英钠长斑岩样品LA-ICP-MS锆石U-Pb年龄分别为324.9±2.4 Ma和324.5±2.1 Ma,表明石英钠长斑岩为晚石炭世岩浆活动的产物。岩相学研究表明,石英钠长斑岩中发育黄铜矿+绿泥石+硬石膏+方解石矿物组合,这与延东铜矿主成矿阶段的矿物组合基本一致,并且石英钠长斑岩成岩年龄与辉钼矿年龄在误差范围内一致,表明石英钠长斑岩可能与土屋-延东铜矿带铜矿形成有着密切关系,这一发现可能为大南湖–头苏泉岛弧带晚石炭世铜矿的勘查提供新的思路。     

Geology, Geochemistry, and Genesis of the Tongcun Reduced Porphyry Mo (Cu) Deposit, NW Zhejiang Province, China

The Tongcun Mo(Cu) deposit in Kaihua city of Zhejiang Province,eastern China,occurs in and adjacent to the Songjiazhuang granodiorite porphyry and is a medium-sized and important porphyry type ore deposit.Two irregular Mo(Cu) orebodies consist of various types of hydrothermal veinlets.Intensive hydrothermal alteration contains skarnization,chloritization,carbonatization,silicification and sericitization.Based on mineral assemblages and crosscutting relationships,the oreforming processes are divided into five stages,i.e.,the early stage of garnet + epidote ± chlorite associated with skarnization and K-feldspar + quartz ± molybdenite veins associated with potassicsilicic alteration,the quartz-sulfides stage of quartz + molybdenite ± chalcopyrite ± pyrite veins,the carbonatization stage of calcite veinlets or stockworks,the sericite + chalcopyrite ± pyrite stage,and the late calcite + quartz stage.Only the quartz-bearing samples in the early stage and in the quartzsulfides stage are suitable for fluid inclusions(FIs) study.Four types of FIs were observed,including1) CO_2-CH_4 single phase FIs,2) CO_2-bearing two- or three-phase FIs,3) Aqueous two-phase FIs,and4) Aqueous single phase FIs.FIs of the early stages are predominantly CO_2- and CH_4-rich FIs of the CO_2-CH4-H_2O-NaCl system,whereas minerals in the quartz-sulfides stage contain CO_2-rich FIs of the CO_2-H_2O-NaCl system and liquid-rich FIs of the H_2O-NaCl system.For the CO_2-CH_4 single phase FIs of the early mineralization stage,the homogenization temperatures of the CO_2 phase range from 15.4 ℃ to 25.3 ℃(to liquid),and the fluid density varies from 0.7 g/cm~3 to 0.8 g/cm~3;for two- or three-phase FIs of the CO_2-CH_4-H_2O-NaCl system,the homogenization temperatures,salinities and densities range from 312℃ to 412℃,7.7 wt%NaCl eqv.to 10.9 wt%NaCl eqv.,and 0.9 g/cm~3 to 1.0 g/cm~3,respectively.For CO_2-H_2O-NaCI two- or threephase FIs of the quartz-sulfides stage,the homogenization temperatures and salinities range from255℃ to 418℃,4.8 wt%NaCl eqv.to 12.4 wt%NaCl eqv.,respectively;for H_2O-NaCl two-phase FIs,the homogenization temperatures range from 230 ℃ to 368 ℃,salinities from 11.7 wt%NaCl eqv.to16.9 wt%NaCl eqv.,and densities from 0.7 g/cm~3 to 1.0 g/cm~3.Microthermometric measurements and Laser Raman spectroscopy analyses indicate that CO_2 and CH_4 contents and reducibility(indicated by the presence of CH_4) of the fluid inclusions trapped in quartz-sulfides stage minerals are lower than those in the early stage.Twelve molybdenite separates yield a Re-Os isochron age of 163 ± 2.4 Ma,which is consistent with the emplacement age of the Tongcun,Songjiazhuang,Dayutang and Huangbaikeng granodiorite porphyries.The S18OSMow values of fluids calculated from quartz of the quartz-sulfides stage range from 5.6‰ to 8.6‰,and the JDSMOw values of fluid inclusions in quartz of this stage range from-71.8‰ to-88.9‰,indicating a primary magmatic fluid source.534SV-cdt values of sulfides range from+1.6‰ to +3.8‰,which indicate that the sulfur in the ores was sourced from magmatic origins.Phase separation is inferred to have occurred from the early stage to the quartz-sulfides stage and resulted in ore mineral precipitation.The characteristics of alteration and mineralization,fluid inclusion,sulfur and hydrogen-oxygen isotope data,and molybdenite Re-Os ages all suggest that the Tongcun Mo(Cu) deposit is likely to be a reduced porphyry Mo(Cu) deposit associated with the granodiorite porphyry in the Tongcun area.     

Ore Genesis of the Lunwei Granite‐Related Scheelite Deposit in the Wuyi Metallogenic Belt,Southeast China: Constraints from Geochronology,Fluid Inclusions,and H–O–S Isotopes

A granite‐related scheelite deposit has been recently discovered in the Wuyi metallogenic belt of southeast China. The veinlet–disseminated scheelite occurs mainly in the inner and outer contact zones of the porphyritic biotite granite, spatially associated with potassic feldspathization and silicification. Re–Os dating of molybdenite intergrowths with scheelite yield a well‐constrained isochron age of 170.4 ± 1.2 Ma, coeval with the LA–MC–ICP–MS concordant zircon age of porphyritic biotite granite (167.6 ± 2.2 Ma), indicating that the Lunwei W deposit was formed in the Middle Jurassic (~170 Ma). We identify three stages of ore formation (from early to late): (I) the quartz–K‐feldspar–scheelite stage; (II) the quartz–polymetallic sulfide stage; and (III) the quartz–carbonate stage. Based on petrographic observations and microthermometric criteria, the fluid inclusions in the scheelite and quartz are determined to be mainly aqueous two‐phase (liquid‐rich and gas‐rich) fluid inclusions, with minor gas‐pure and CO₂‐bearing fluid inclusions. Ore‐forming fluids in the Lunwei W deposit show a successive decrease in temperature and salinity from Stage I to Stage III. The homogenization temperature decreases from an average of 299 °C in Stage I, through 251 °C in Stage II, to 212 °C in Stage III, with a corresponding change in salinity from an average of 5.8 wt.%, through 5.2 wt.%, to 3.4 wt.%. The ore‐forming fluids have intermediate to low temperatures and low salinities, belonging to the H₂O–NaCl ± CO₂ system. The δ¹⁸O_H2O values vary from 1.8‰ to 3.3‰, and the δD_V‐SMOW values vary from –66‰ to –76‰, suggesting that the ore‐forming fluid was primarily of magmatic water mixed with various amounts of meteoric water. Sulfur isotope compositions of sulfides (δ³⁴S ranging from –1.1‰ to +2.4‰) and Re contents in molybdenite (1.45–19.25 µg/g, mean of 8.97 µg/g) indicate that the ore‐forming materials originated mainly in the crust. The primary mechanism for mineral deposition in the Lunwei W deposit was a decrease in temperature and the mixing of magmatic and meteoric water. The Lunwei deposit can be classified as a porphyry‐type scheelite deposit and is a product of widespread tungsten mineralization in South China. We summarize the geological characteristics of typical W deposits (the Xingluokeng, Shangfang, and Lunwei deposits) in the Wuyi metallogenic belt and suggest that porphyry and skarn scheelite deposits should be considered the principal exploration targets in this area.     

Fluid inclusion studies of a new type of ore deposit: Porphyry tungsten occurrence in China

Lianhuashan mine in South China represents a new type of tungsten ore which can be described as a porphyry tungsten deposit. It is associated with a quartz porphyry stock of Yenshanian age (about 70–135 m. y.). The ore occurs in zone surrounding the contact of the quartz porphyry with Jurassic sandstone and extends into both rock bodies. The ore occurs either as the matrix of breccia or in the form of a very fine network of cross cutting veinlets. The major tungsten minerals are wolframite and scheelite associated with sulfide minerals of Mo, Fe, Cu, Pb and cassiterite. The minerals are fine-grained. There is zoned alteration in the wall rocks. From the center of the quartz porphyry toward the wall rocks one finds: potassic alteration, silicification-sericitization, and chloritization. All these features are similar to those of porphyry copper mineralization. Fluid inclusion studies show three types of inclusion: liquid-rich (Type I), gas-rich (Type II), and polyphase with daughter minerals (Type III) fluid inclusions. The homogenization temperatures of Type I range from 210° to 380°C, with a salinity of 2–15 wt.% NaCl equiv., those of Type II from 270° to 420°C, and those of Type III from 240° to 400°C with a salinity of 31–33 wt.% NaCl equiv. The closely associated group of gas-rich and daughter mineral-bearing fluid inclusions homogenized at almost the same temperatures. Such results indicate boiling of oreforming fluids. These fluid inclusion data indicate that low salinity (Type I) and high salinity fluids (Type III) responsible for porpb yry copper deposits are the same as those for porphyry tungsten ore deposits. These observations suggest that the Lianhuashan tungsten ore deposit is a porphyry tungsten deposit and was formed by hydrothermal fluids similar to those responsible for the well-known porphyry copper deposits.     

河北沽源张麻井铀-钼矿床围岩SHRIMP锆石U-Pb定年及其地质意义

沽源-红山子铀成矿带河北沽源张麻井铀-钼矿床赋存在张家口组第三段流纹岩与流纹斑岩、石英斑岩的接触带附近,主要受隐爆角砾岩控制。研究表明,张麻井铀-钼矿床赋矿流纹岩、流纹斑岩和石英斑岩的锆石具有清晰的环带结构,Th/U比值高,属典型的岩浆成因锆石。SHRIMP锆石U-Pb测年结果显示,流纹岩12颗锆石的206Pb/238U年龄变化范围为136~144 Ma,加权平均年龄为(138.6±1.4)Ma(MSWD=2.4);流纹斑岩11颗锆石的206Pb/238U年龄变化范围为136~145 Ma,加权平均年龄为(140.2±1.6)Ma(MSWD=2.2);石英斑岩11颗锆石的206Pb/238U年龄变化范围为132~147 Ma,加权平均年龄为(136.2±2.9)Ma(MSWD=1.8)。由此可见,流纹岩、流纹斑岩和石英斑岩的同位素年龄在误差范围内一致,指示火山喷发和斑岩就位发生在早白垩世早期,与滨西太平洋成矿域以火山岩为赋矿主岩的热液型铀矿的围岩形成时代一致,沽源-红山子铀成矿带早白垩世早期次火山岩与同期火山岩的接触带附近是寻找铀矿的有利空间。     

Geochronology and fluid source constraints of the Songligou gold‐telluride deposit,western Henan Province,China: Analysis of genetic implications

The Songligou gold‐telluride deposit, located in Songxian County, western Henan Province, China, is one of many gold‐telluride deposits in the Xiaoqinling‐Xiong'ershan district. Gold orebodies occur within the Taihua Supergroup and are controlled by the WNW F101 Fault, and the fault was cut across by a granite porphyry dike. Common minerals in gold orebodies include quartz, chlorite, epidote, K‐feldspar, calcite, fluorite, sericite, phlogopite, bastnasite, pyrite, galena, chalcopyrite, sphalerite, tellurides, gold, bismuthinite, magnetite, and hematite, and pyrite is the dominant sulfide. Four mineralization stages are recognized, including pyrite‐quartz stage (I), quartz‐pyrite stage (II), gold‐telluride stage (III), and quartz‐calcite stage (IV). This work reports the Rb–Sr age of gold‐telluride‐bearing pyrite and zircon U–Pb age of granite porphyry, as well as S isotope data of pyrite and galena. The pyrite Rb–Sr isochron age is 126.6 ± 2.3 Ma (MSWD = 1.8), and the average zircon U–Pb age of granite porphyry is 166.8 ± 4.1 Ma (MSWD = 4.9). (⁸⁷Sr/⁸⁶Sr) _i values of pyrite and δ³⁴S values of sulfides vary from 0.7104 to 0.7105 and ?11.84 to 0.28‰, respectively. The obtained Rb–Sr isochron age represents the ore formation age of the Songligou gold‐telluride deposit, which is much younger than the zircon U–Pb age of the granite porphyry. Strontium and S isotopes, together with the presence of bastnaesite, suggest that the ore‐forming fluid was derived from felsic magmas with input of a mantle component and subsequently interacted with the Taihua Supergroup. Tellurium was derived from metasomatized mantle and was related to the subduction of the Shangdan oceanic crust and Izanagi plate beneath the North China Craton (NCC). This deposit is a part of the Early Cretaceous large‐scale gold mineralization in east NCC and formed in an extensional tectonic setting.     

大兴安岭北部岔路口斑岩钼矿床岩浆岩锆石U Pb年龄及其地质意义

黑龙江省岔路口超大型斑岩钼矿床位于大兴安岭北部,是目前我国东北地区最大的钼矿床,矿体赋存于中酸性杂岩体及侏罗系火山-沉积岩内,其中花岗斑岩、石英斑岩、细粒花岗岩与钼矿化关系密切.本文采用LA-ICP-MS锆石U-Pb定年方法,获得了矿区内二长花岗岩、花岗斑岩、石英斑岩、细粒花岗岩、流纹斑岩、闪长玢岩及安山斑岩的结晶年龄分别为162±1.6 Ma、149±4.6 Ma、148±1.6 Ma、148±1.2 Ma、137±3.3 Ma、133±1.7Ma和132±1.6 Ma.岔路口矿区内至少存在3期岩浆活动,其顺序为侏罗纪火山-沉积岩、二长花岗岩→晚侏罗世花岗斑岩、石英斑岩、细粒花岗岩→早白垩世流纹斑岩、闪长玢岩、安山斑岩.岔路口矿床成矿时代为晚侏罗世,是东北亚大陆内部构造-岩浆活化的产物,形成于古太平洋板块俯冲作用引起的挤压向伸展构造体制转折背景,与我国东部大规模钼矿化爆发期相对应.     

新疆准噶尔北缘玉勒肯哈腊苏铜(钼)矿区韧性剪切变形时代——来自白云母和黑云母Ar-Ar年龄的约束

玉勒肯哈腊苏斑岩铜(钼)矿主要赋存于闪长玢岩中,少量在北塔山组火山岩及似斑状石英二长岩中。矿化呈细脉状、细脉-浸染状和浸染状。成矿过程经历了斑岩期、剪切变形期和表生期。矿区发育韧性剪切变形带,中泥盆统北塔山组、下石炭统姜巴斯套组、岩体及矿体均发生了剪切变形作用。沿剪切面发育黑云母和白云母新生矿物。白云母的坪年龄和等时线年龄分别为283.8±1.5Ma和285.4±3.1Ma,黑云母的坪年龄和等时线年龄分别为277.0±2.0Ma和277.0±4.0Ma,在误差范围内基本一致,限定矿区韧性剪切变形时间在早二叠世(284～277Ma),与区域额尔齐斯-玛因鄂博断裂活动时间一致。主要成矿作用形成于斑岩期,成矿时代为中泥盆世(374Ma),早二叠世的韧性剪切变形作用只对铜(钼)矿化进行改造。     

Carboniferous porphyry Cu (-Au) mineralization of the West Junggar region,NW China: the Shiwu example

ABSTRACT

The West Junggar region, located in the Central Asian Orogenic Belt (CAOB), is characterized by extensive Carboniferous magmatism and porphyry Cu (-Au) deposits. The Shiwu porphyry Cu-Au deposit, located in the east of the Barluk Mountains, the West Junggar region, is not only a newly discovered deposit but also a representative porphyry Cu-Au deposit in this area. The volcanic rocks (including andesite and tuff) and intrusive rocks (including diorite, quartz diorite, quartz diorite porphyry, and tonalite porphyry) occurred in the Shiwu area and the mineralization associated with the quartz diorite porphyry. The secondary ion mass spectrometry (SIMS) zircon U–Pb ages of quartz diorite porphyry and tonalite porphyry are 310.4 ± 2.3 Ma and 310.1 ± 2.4 Ma, respectively, indicating that the Shiwu deposit is related to the Late Carboniferous magmatism. Intrusive rocks, which were characterized by the enrichment of large ion lithophile elements (LILEs) and pronounced negative high field strength elements (HFSEs), belong to the calc-alkaline or tholeiitic series. Their (⁸⁷Sr/⁸⁶Sr)_i, (¹⁴³Nd/¹⁴⁴Nd)_I, and εNd(t) values range from 0.703569 to 0.704311, 0.512488 to 0.512512, and 4.9 to 5.3, respectively. Volcanic rocks, which belong to the calc-alkaline series, have similar geochemical features as the intrusive rocks, and their (⁸⁷Sr/⁸⁶Sr)_i, (¹⁴³Nd/¹⁴⁴Nd)_i, and εNd(t) values, respectively, are 0.703704–0.704071, 0.512520–0.512542, and 5.49–5.92. These characters indicate that the igneous rocks in the Shiwu area derived dominantly from the mantle and formed in an island arc setting. These characters also further confirmed that the Barluk Mountains is still in an island arc setting in the Late Carboniferous and the accretionary orogenesis can exist until 310 Ma at least.     

Generation and Evolution of Ore Fluids for Porphyry Cu-Au Mineralization of the Santo Tomas II (Philex) Deposit, Philippines

Abstract: The Santo Tomas II (Philex) deposit is a porphyry Cu‐Au deposit, located in the southern part of the Baguio mineral district, Benguet Province, northern Luzon, Philippines. The Santo Tomas II deposit is associated with an intrusive complex consisting of four rock types that are distinguished based on petrography. They are 1) post‐ore clinopyroxene‐bearing hornblende andesite porphyry, 2) ore‐generating hornblende andesite porphyry, 3) hornblende quartz diorite porphyry and 4) porphyritic hornblende quartz diorite. K‐Ar age of hydrothermal biotitization was estimated to be 1.5±0.4 Ma. A number of intrusive bodies having broadly similar petrography and K‐Ar age occur in the vicinity of the Santo Tomas II deposit, such as at Clifton, Ligay (Binang), Bumolo (Waterhole) and Philex Main Camp areas. The intrusions at the Santo Tomas II deposit and in the vicinity are characterized by high X_Mg (Mg/[Mg+Fe] atomic ratio, about 0.7 or higher) of mafic silicate phenocrysts such as hornblende, and high sulfur contents (> 0.2 wt% as SO₃) in accessory microphenocrystic apatite, suggesting a highly oxidizing condition. Sulfur is accommodated dominantly as oxidized species since the crystallization of phe‐nocrysts. Sub‐dendritic rim of tremolitic amphibole on hornblende phenocryst in the ore‐generating andesite porphyry at the Santo Tomas II deposit suggests interaction of magma and aqueous fluid(s) exsolved due to decompression during intrusion. Dissemination of magnetite is associated with hydrothermal biotitization and is followed by sheeted and stockwork quartz veinlets having silician magnetite and rare titanohematite instead of Cu‐Fe sulfides. The silician magnetite‐rich quartz veinlet was formed at f_O2 near the hematite‐magnetite buffer at nearly magmatic temperature, where sulfur dominantly existed as oxidized species such as SO₂. Chalcopyrite and bornite, which commonly exhibit micrographic texture often accompanying Pd telluride and native gold/Au‐rich electrum, are associated with subsequent anhydrite (‐quartz) veinlets and stringers. Both intermediate solid solution (iss) and bornite solid solution (bnss) are thought to have coprecipitated primarily at above 500°C based on fluid inclusion microthermometry and sulfur isotope thermometry applied for anhydrite and associated chal‐copyrite and bornite. The initial iss is considered to have converted to chalcopyrite partly replacing bnss during cooling. The hypersaline polyphase fluid inclusions abundantly found in the sheeted and stockwork quartz as well as anhydrite veinlets with scarce gaseous inclusions suggest that they have been trapped in the two aqueous fluid immiscible region. The western Luzon arc associated with porphyry Cu mineralization is characterized by oxidized hydrous magmatism and shallow emplacement, and by the source of sulfur enriched in ³⁴S.     

Geology,geochemistry and genesis of the Makou magnetite-apatite deposit in the Luzong volcanic basin,Middle-Lower Yangtze River Valley Metallogenic Belt,Eastern China

The Middle-Lower Yangtze River Valley Metallogenic Belt (MLYB) is located on the northern margin of the Yangtze Plate (Eastern China). Ore deposits in the belt are mainly clustered in seven ore districts, and are closely associated with Mesozoic intermediate-felsic magmatic rock. Among the seven ore districts, the Luzong and Ningwu districts host large-scale iron resources in volcanic basins. The Makou magnetite-apatite deposit in the southern Luzong Basin was previously interpreted to be related to a quartz syenite porphyry. In this study, we conducted field geological studies and determined the age and geochemistry of the Makou intrusive rocks. Petrography and electron probe micro analysis (EPMA) indicated that the Makou ore-hosting rocks have intense albite alteration. The wallrock alteration is spatially restricted, and comprises albite alteration (Stage I), magnetite mineralization (Stage II), quartz-sulfide alteration (Stage III) and carbonate alteration (Stage IV) stages. Fluid inclusions in syn-mineralization apatite homogenized at 252.2–322.6 °C, which slightly lower than is typical for magnetite-apatite deposits in the region. Field study revealed that the quartz syenite porphyry at Makou disrupted the orebodies along clear-cut intrusive contacts, and that the quartz syenite porphyry does not contain iron mineralization, suggesting it has no direct genetic relationship with the iron mineralization. The ore-hosting albitite and ore-forming biotite diorite have LA-ICP-MS zircon U-Pb ages of 129.6 ± 1.2 Ma and 131.2 ± 3.3 Ma, respectively, and the iron mineralization was dated by mass spectrometer phlogopite ⁴⁰Ar-³⁹Ar at 130.76 ± 0.77 Ma. We propose that the Makou magnetite-apatite deposit is genetically related to the biotite diorite, rather than to the quartz syenite porphyry in the mine pit. The biotite diorite closely resembles intrusions related to magnetite-apatite deposits elsewhere in the region.     

Evolution of magmatic-hydrothermal system of the Kalaxiange’er porphyry copper belt and implications for ore formation (Xinjiang,China)

The Kalaxiange’er porphyry copper ore belt is situated in the eastern part of the southern Altai of the Central Asian Orogenic Belt and forms part of a broad zone of Cu porphyry mineralization in southern Mongolia, which includes the Oyu Tolgoi ore district and other copper–gold deposits. The copper ore bodies are spatially associated with porphyry intrusions of granodiorite, quartz diorite, quartz syenite, and quartz monzonite and have a polygenetic (polychromous) origin (magmatic porphyry, hydrothermal, and supergene). The mineralized porphyries are characterized by almost identical REE and trace element patterns. The Zr/Hf and Nb/Ta ratios are similar to those of normal granite produced through the evolution of mantle magma. The low initial Sr isotope ratio I_Sr, varying within a narrow range of values (0.703790–0.704218), corresponds to that of primitive mantle, whereas the εNd(T) value of porphyry varies from 5.8 to 8.4 and is similar to that of MORB. These data testify to the upper-mantle genesis of the parental magmas of ore-bearing porphyry, which were then contaminated with crustal material in an island-arc environment. The isotopic composition of sulfur (unimodal distribution of δ34S with peak values of − 2 to − 4‰) evidences its deep magmatic origin; the few lower negative δ³⁴S values suggest that part of S was extracted from volcanic deposits later. The isotopic characteristics of Pb testify to its mixed crust–upper-mantle origin. According to SHRIMP U–Pb geochronological data for zircon from granite porphyry and granodiorite porphyry, mineralization at the Xiletekehalasu porphyry Cu deposit formed in two stages: (1) Hercynian “porphyry” stage (375.2 ± 8.7 Ma), expressed as the formation of porphyry with disseminated and vein–disseminated mineralization, and (2) Indosinian stage (217.9 ± 4.2 Ma), expressed as superposed hydrothermal mineralization. The Re–Os isotope data on molybdenite (376.9 ± 2.2 Ma) are the most consistent with the age of primary mineralization at the Xiletekehalasu porphyry Cu deposit, whereas the Ar–Ar isotopic age (230 ± 5 Ma) of K-feldspar–quartz vein corresponds to the stage of hydrothermal mineralization. The results show that mineralization at the Xiletekehalasu porphyry Cu deposit was a multistage process which resulted in the superposition of the Indosinian hydrothermal mineralization on the Hercynian porphyry Cu mineralization.     

Chronology and Crust-Mantle Mixing of Ore-forming Porphyry of the Bangongco: Evidence from Zircon U-Pb Age and Hf Isotopes of the Naruo Porphyry Copper-Gold Deposit

The Naruo porphyry copper-gold deposit(hereinafter referred to as the Naruo deposit) in Tibet is a potentially ultra-large, typical gold-rich porphyry copper deposit, which was recently discovered in the Bangongco-Nujiang metallogenic belt. This study analyzed U-Pb chronology and Hf isotopes of the ore-bearing granodiorite porphyry in the Naruo deposit using the LA-ICPMS dating technique. The results show that the weighted average age is 124.03±0.94Ma(MSWD=1.7, n=20), and 206Pb/238 U isochron age is 126.2±2.7 Ma(MSWD=1.02, n=20), both of which are within the error. The weighted average age represents the crystallization age of the granodiorite porphyry, which indicates that the ore-bearing porphyry in the Naruo deposit area was formed in the Early Cretaceous and further implies that the Neo-tethys Ocean had not been closed before 124 Ma under a typical island-arc subduction environment. The εHf(t) of zircons from the granodiorite porphyry varies from 2.14 to 9.07, with an average of 5.18, and all zircons have εHf(t) values greater than 0; 176Hf/177 Hf ratio is relatively high(0.282725–0.282986). Combined with the zircon age―Hf isotope correlation diagram, the aforementioned data indicate that the source reservoir might be a region that is mixed with depleted mantle and ancient crust, which possibly contains more materials sourced from depleted mantle. Rock-forming ages and ore-forming ages of the Duolong ore concentrate area are 120–124 Ma and 118–119 Ma, respectively, which indicate 124–118 Ma represents the main rockforming and ore-forming stage within the area. The Naruo deposit is located in the north of the Bangongco-Nujiang suture, and it yielded a zircon LA-ICPMS age of 124.03 Ma. This indicates the Bangongco-Nujiang oceanic basin subducted towards the north at about 124 Ma, and the Neo-tethys Ocean had not been closed before the middle Early Cretaceous. It is possible that the crust-mantle mixing formed the series of large and giant porphyry copper-gold deposits in the Bangongco.